Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 6.428438] usb 5-1.5: Product: Laptop_Integrated_Webcam_E4HD
- [ 6.428441] usb 5-1.5: Manufacturer: CN0Y4TWT72487235A375A00
- [ 6.542447] ata1.01: failed to resume link (SControl 0)
- [ 6.542532] ata2.01: failed to resume link (SControl 0)
- [ 6.698472] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
- [ 6.698485] ata2.01: SATA link down (SStatus 0 SControl 0)
- [ 6.998587] Switched to clocksource tsc
- [ 7.012790] ata2.00: ATA-8: TOSHIBA MQ01ABD100, AX001A, max UDMA/100
- [ 7.012797] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 7.027013] ata2.00: configured for UDMA/100
- [ 11.736795] ata1.00: link is slow to respond, please be patient (ready=0)
- [ 15.207693] ata1.00: SRST failed (errno=-16)
- [ 16.555263] ata1.01: failed to resume link (SControl 0)
- [ 21.749617] ata1.00: link is slow to respond, please be patient (ready=0)
- [ 25.220514] ata1.00: SRST failed (errno=-16)
- [ 26.568081] ata1.01: failed to resume link (SControl 0)
- [ 31.762436] ata1.00: link is slow to respond, please be patient (ready=0)
- [ 60.257388] ata1.00: SRST failed (errno=-16)
- [ 60.257443] ata1.00: limiting SATA link speed to 3.0 Gbps
- [ 60.257446] ata1.01: limiting SATA link speed to 1.5 Gbps
- [ 61.604959] ata1.01: failed to resume link (SControl 0)
- [ 65.287791] ata1.00: SRST failed (errno=-16)
- [ 65.299268] ata1.00: reset failed, giving up
- [ 65.299536] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 1A PQ: 0 ANSI: 5
- [ 65.299830] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 65.299877] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 65.299879] sd 1:0:0:0: [sda] 4096-byte physical blocks
- [ 65.300033] sd 1:0:0:0: [sda] Write Protect is off
- [ 65.300036] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 65.300140] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 65.636693] sda: sda1 sda2
- [ 65.637153] sd 1:0:0:0: [sda] Attached SCSI disk
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement