Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ================================================================================
- Test Summary
- ================================================================================
- Error : 10
- Expected Failure : 3
- Fail : 49
- Pass : 272
- Skipped : 19
- Start Time : 2017-05-14 11:56:06
- End Time : 2017-05-14 15:22:02
- Test Duration : 3:25:55.48
- ================================================================================
- --------------------------------------------------------------------------------
- Test Details
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
- Module [ 1 / 30] : test-devices-top-menu-badges
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesTopMenuBadges
- Description : SG.T.7.8 Top Menu Notification Badges
- Tests : 5
- --------------------------------------------------------------------------------
- Test [ 1 / 5] : test_jobs_menu_badge_reports_queued_jobs
- Test Description : SG.T.7.8.2 Jobs menu notification badge reports queued jobs
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 5] : test_device_menu_badge_reports_unacknowledged_alarms
- Test Description : SG.T.7.8.1 Device menu notification badge reports number of unacknowledged alarms
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 5] : test_badge_reports_element_manager_service_offline
- Test Description : SG.T.7.8.4 Report 'Element management service offline'
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 5] : test_jobs_menu_notification_badge_reports_failed_jobs
- Test Description : SG.T.7.8.3 Jobs menu notification badge reports failed jobs
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 5] : test_badge_reports_number_of_unread_error_log_messages
- Test Description : SG.T.7.8.5 Notifications area reports number of unread error log messages
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 2 / 30] : test-devices-job-history
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesJobHistory
- Description : SG.T.7.11 Job History
- Tests : 9
- --------------------------------------------------------------------------------
- Test [ 1 / 9] : test_configuration_job_details
- Test Description : SG.T.7.11.5 Configuration job details (SyncBox)
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 9] : test_job_history_page_is_navigable_via_keyboard
- Test Description : SG.T.7.11.2 Ensure page is navigable via the keyboard
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 9] : test_management_job_details
- Test Description : SG.T.7.11.4 Management job details (SyncBox)
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 9] : test_job_history_download_as_csv_option
- Test Description : SG.T.7.11.9 Verify Download as CSV Option
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 9] : test_jobs_created_when_daemon_offline_are_processed_in_order_when_started
- Test Description : SG.T.7.11.8 Verify many jobs created when daemon stopped are processed in order when daemon started
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 9] : test_job_history_details
- Test Description : SG.T.7.11.3 Display job details like Time-stamp, Result, Device count
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 9] : test_configuration_job_details_qutc
- Test Description : SG.T.7.11.6 Configuration job details (QuTC)
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 9] : test_job_created_when_daemon_stopped_is_processed_when_started
- Test Description : SG.T.7.11.7 Verify job created when daemon stopped is processed when daemon started
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 9] : test_job_history_page_layout
- Test Description : SG.T.7.11.1 Verify Job history page layout and contents
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 3 / 30] : test-devices-advanced-searching
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesAdvancedSearching
- Description : SG.T.7.3 Advanced searching
- Tests : 8
- --------------------------------------------------------------------------------
- Test [ 1 / 8] : test_search_by_serial_number
- Test Description : SG.T.7.3.1 Search by serial number
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 8] : test_search_by_management_address
- Test Description : SG.T.7.3.2 Search by management address
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 8] : test_non_standard_custom_fields_are_searchable
- Test Description : SG.T.7.3.7 Non-standard custom fields are searchable
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 8] : test_clear_search_terms
- Test Description : SG.T.7.3.8 Clearing search terms
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 8] : test_search_with_multiple_terms
- Test Description : SG.T.7.3.5 Search with multiple terms
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 8] : test_search_by_device_type
- Test Description : SG.T.7.3.3 Search by device type
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 8] : test_search_by_device_status
- Test Description : SG.T.7.3.4 Search by device status
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 8] : test_search_by_custom_fields
- Test Description : SG.T.7.3.6 Search by custom fields
- Status : Pass
- Duration : 10
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 4 / 30] : test-devices-alarm-history
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesAlarmHistory
- Description : SG.T.7.9 Alarm history
- Tests : 13
- --------------------------------------------------------------------------------
- Test [ 1 / 13] : test_alarm_history_page_is_navigable_via_keyboard
- Test Description : SG.T.7.9.11 Ensure page is navigable via the keyboard
- Status : Error
- Duration : 100
- stdout : I'm a QuTC variant of SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 -q &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : list index out of range
- --------------------------------------------------------------------------------
- Test [ 2 / 13] : test_status_change_of_auto_acknowledged_alarm
- Test Description : SG.T.7.9.10 Observe status change of an automatically acknowledged alarm
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 13] : test_acknowledge_an_unacknowledged_alarm
- Test Description : SG.T.7.9.3 Acknowledge an unacknowledged alarm
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 13] : test_alarm_history_page_tooltips
- Test Description : SG.T.7.9.2 Verify Alarm History page tooltips
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 13] : test_alarm_history_download_as_csv
- Test Description : SG.T.7.9.12 Verify Download as CSV option
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 13] : test_toggle_acknowledged_status_of_an_alarm
- Test Description : SG.T.7.9.8 Toggling acknowledged status of an alarm
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 13] : test_alarm_history_page_layout
- Test Description : SG.T.7.9.1 Verify Alarm History page layout and contents
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 13] : test_filter_unacknowledged_and_uncleared_alarms
- Test Description : SG.T.7.9.6 Filter unacknowledged and uncleared alarms
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 13] : test_chris
- Test Description : Chris was testing here!
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 10 / 13] : test_acknowledge_previous_acknowledged_alarm
- Test Description : SG.T.7.9.4 Acknowledge an already-acknowledged alarm
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 11 / 13] : test_clear_alarms_using_invert_selection
- Test Description : SG.T.7.9.9 Clear Single/multiple alarms. Use 'invert selection' button for multiple alarm selection
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 12 / 13] : test_clear_an_uncleared_alarm
- Test Description : SG.T.7.9.5 Clear an uncleared alarm
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 13 / 13] : test_navigate_alarm_history_results
- Test Description : SG.T.7.9.7 Navigate alarm history results
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 5 / 30] : test-authorities-configuration
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestAuthoritiesConfiguration
- Description : SG.T.6.4 Authorities configuration
- Tests : 13
- --------------------------------------------------------------------------------
- Test [ 1 / 13] : test_primary_and_secondary_auths_must_be_different
- Test Description : SG.T.6.4.13 Primary and secondary authority host names must not be same.
- Status : Pass
- Duration : 18
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 13] : test_authorities_tab_undo_changes_after_saving
- Test Description : SG.T.6.4.4 Undo changes (after saving)
- Status : Pass
- Duration : 21
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 13] : test_timeout_param_is_numeric_and_in_range
- Test Description : SG.T.6.4.9 Timeout parameters must be numeric and within range
- Status : Pass
- Duration : 19
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 13] : test_authorities_tab_layout
- Test Description : SG.T.6.4.1 Tab layout
- Status : Pass
- Duration : 13
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 13] : test_defaults_used_when_no_config_exists
- Test Description : SG.T.6.4.2 Defaults are set automatically when no existing configuration exists
- Status : Pass
- Duration : 16
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 13] : test_retries_param_is_numeric_and_in_range
- Test Description : SG.T.6.4.10 Retries parameters must be numeric and within range
- Status : Pass
- Duration : 18
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 13] : test_second_auth_is_disabled_if_primary_is_disabled
- Test Description : SG.T.6.4.11 Secondary authority cannot be enabled if primary authority is disabled
- Status : Pass
- Duration : 16
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 13] : test_second_auth_may_be_disabled
- Test Description : SG.T.6.4.6 The secondary authority may be disabled
- Status : Pass
- Duration : 32
- stdout : ERROR: Element could not be found. Key: 'saved_changes_message_text', XPATH: '//*[@id="content"]/div[contains(@class, "alert")]'
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 13] : test_authorities_tab_undo_changes
- Test Description : SG.T.6.4.3 Undo changes
- Status : Pass
- Duration : 21
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 10 / 13] : test_both_auths_may_be_disabled
- Test Description : SG.T.6.4.7 Both authorities may be disabled
- Status : Pass
- Duration : 13
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 11 / 13] : test_authorities_tab_save_changes
- Test Description : SG.T.6.4.5 Save changes
- Status : Pass
- Duration : 22
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 12 / 13] : test_validity_of_auth_hostname_or_ip
- Test Description : SG.T.6.4.12 Check validity of Authority hostname/IPv4 address
- Status : Pass
- Duration : 17
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 13 / 13] : test_all_params_must_be_provided_for_an_auth
- Test Description : SG.T.6.4.8 All parameters must be provided for an enabled authority
- Status : Pass
- Duration : 19
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 6 / 30] : test-syncbox-pll-alarms
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestSyncBoxPllAlarms
- Description : SG.T.10.5 SyncBOX PLL Alarms
- Tests : 10
- --------------------------------------------------------------------------------
- Test [ 1 / 10] : test_syncboxPllLossOfLock
- Test Description : SG.T.10.5.10 syncboxPllLossOfLock
- Status : Fail
- Duration : 54
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'table_row_by_serial_number', XPATH: '//*[@id="discoveredDevicesTable"]/tbody/tr[td[4]/text()="6200-123456"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Error: Could not find device "6200-123456" in device list
- --------------------------------------------------------------------------------
- Test [ 2 / 10] : test_syncboxInHoldover
- Test Description : SG.T.10.5.1 syncboxInHoldover
- Status : Fail
- Duration : 55
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'table_row_by_serial_number', XPATH: '//*[@id="discoveredDevicesTable"]/tbody/tr[td[4]/text()="6200-123456"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Error: Could not find device "6200-123456" in device list
- --------------------------------------------------------------------------------
- Test [ 3 / 10] : test_syncboxPacketDelayJump
- Test Description : SG.T.10.5.9 syncboxPacketDelayJump
- Status : Fail
- Duration : 54
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'table_row_by_serial_number', XPATH: '//*[@id="discoveredDevicesTable"]/tbody/tr[td[4]/text()="6200-123456"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Error: Could not find device "6200-123456" in device list
- --------------------------------------------------------------------------------
- Test [ 4 / 10] : test_syncboxNoTimeOfDayInput
- Test Description : SG.T.10.5.4 syncboxNoTimeOfDayInput
- Status : Fail
- Duration : 126
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 4 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 5 / 10] : test_syncboxNoClockInput
- Test Description : SG.T.10.5.3 syncboxNoClockInput
- Status : Fail
- Duration : 122
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 4 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 6 / 10] : test_syncboxNoCurrentMaster
- Test Description : SG.T.10.5.2 syncboxNoCurrentMaster
- Status : Fail
- Duration : 56
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element not visible. Key: 'message_management_succeeded', XPATH: '//*[@id="SUCCEEDED"]/div'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Expected management success message.
- --------------------------------------------------------------------------------
- Test [ 7 / 10] : test_syncboxUtcOffsetUnknown
- Test Description : SG.T.10.5.7 syncboxUtcOffsetUnknown
- Status : Fail
- Duration : 54
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'table_row_by_serial_number', XPATH: '//*[@id="discoveredDevicesTable"]/tbody/tr[td[4]/text()="6200-123456"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Error: Could not find device "6200-123456" in device list
- --------------------------------------------------------------------------------
- Test [ 8 / 10] : test_syncboxLeapSecondWarning
- Test Description : SG.T.10.5.8 syncboxLeapSecondWarning
- Status : Fail
- Duration : 121
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 4 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 9 / 10] : test_syncboxExcessivePacketDelayVariation
- Test Description : SG.T.10.5.6 syncboxExcessivePacketDelayVariation
- Status : Fail
- Duration : 54
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'table_row_by_serial_number', XPATH: '//*[@id="discoveredDevicesTable"]/tbody/tr[td[4]/text()="6200-123456"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Error: Could not find device "6200-123456" in device list
- --------------------------------------------------------------------------------
- Test [ 10 / 10] : test_syncboxTimeNotTai
- Test Description : SG.T.10.5.5 syncboxTimeNotTai
- Status : Fail
- Duration : 123
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 4 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Module [ 7 / 30] : test-snmp-configuration
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestSNMPConfiguration
- Description : SG.T.6.3 SNMP configuration
- Tests : 9
- --------------------------------------------------------------------------------
- Test [ 1 / 9] : test_snmp_tab_layout
- Test Description : SG.T.6.3.2 Tab layout
- Status : Pass
- Duration : 18
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 9] : test_snmp_mibs_exist_on_syncgem_server
- Test Description : SG.T.6.3.1 All SyncGEM MIBs exist on the the server
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 9] : test_snmp_traps_are_sent_to_host
- Test Description : SG.T.6.3.8 Trap notification on northbound SNMP targets
- Status : Fail
- Duration : 320
- stdout :
- stderr :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 5 : v1 Fail: Expected number of traps not received.
- --------------------------------------------------------------------------------
- Test [ 4 / 9] : test_snmp_traps_are_not_sent_to_removed_hosts
- Test Description : SG.T.6.3.9 No notifications are captured by SNMP hosts after removal from SyncGEM
- Status : Pass
- Duration : 315
- stdout :
- stderr :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- --------------------------------------------------------------------------------
- Test [ 5 / 9] : test_host_ports_are_numeric
- Test Description : SG.T.6.3.6 Host ports can be only numbers
- Status : Pass
- Duration : 15
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 9] : test_remove_snmp_host
- Test Description : SG.T.6.3.4 Remove SNMP target
- Status : Pass
- Duration : 19
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 9] : test_host_ports_are_in_range
- Test Description : SG.T.6.3.7 Host ports numbers can be only in range 1 to 65535
- Status : Pass
- Duration : 16
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 9] : test_duplicate_snmp_hosts_are_not_permitted
- Test Description : SG.T.6.3.5 Duplicate SNMP hosts are not allowed
- Status : Pass
- Duration : 16
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 9] : test_add_snmp_host
- Test Description : SG.T.6.3.3 Add northbound SNMP target
- Status : Pass
- Duration : 17
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 8 / 30] : test-RADIUS-configuration
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestRADIUSConfiguration
- Description : SG.T.5 User authentication - RADIUS configuration
- Tests : 6
- --------------------------------------------------------------------------------
- Test [ 1 / 6] : test_non_root_user_authentication_with_primary_secondary_RADIUS_authorities
- Test Description : SG.T.5.18 Test authentication with both primary and secondary RADIUS authorities configured
- Status : Pass
- Duration : 50
- stdout : Server log messages:
- : 1 : 2016-10-30 01:27:23 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:27:22 +0000 info {ruby@192.168.0.15:1812 (RADIUS)} [GUI] User logged in from 192.168.0.6
- : 3 : 2016-10-30 01:27:21 +0000 info {root@localhost} [GUI] User logged out
- : Server log messages:
- : 1 : 2016-10-30 01:27:27 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:27:26 +0000 info {beryl@192.168.0.15:1812 (RADIUS)} [GUI] User login failed
- : 3 : 2016-10-30 01:27:24 +0000 info {root@localhost} [GUI] User logged out
- : Server log messages:
- : 1 : 2016-10-30 01:27:44 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:27:43 +0000 info {beryl@192.168.0.13:1812 (RADIUS)} [GUI] User logged in from 192.168.0.6
- : 3 : 2016-10-30 01:27:42 +0000 info {root@localhost} [GUI] User logged out
- : Server log messages:
- : 1 : 2016-10-30 01:27:47 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:27:46 +0000 info {ruby@192.168.0.13:1812 (RADIUS)} [GUI] User login failed
- : 3 : 2016-10-30 01:27:44 +0000 info {root@localhost} [GUI] User logged out
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 6] : test_controller_actions
- Test Description : SG.T.5.21 Requests for controller actions is validated
- Status : Pass
- Duration : 10
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 6] : test_non_root_user_authentication_with_incorrect_secret_of_primary_RADIUS_authority
- Test Description : SG.T.5.19 Test authentication with incorrect secret
- Status : Pass
- Duration : 37
- stdout : Server log messages:
- : 1 : 2016-10-30 01:28:22 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:28:21 +0000 info {beryl@192.168.0.13:1812 (RADIUS)} [GUI] User login failed
- : 3 : 2016-10-30 01:28:19 +0000 info {root@localhost} [GUI] User logged out
- : Server log messages:
- : 1 : 2016-10-30 01:28:35 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:28:35 +0000 info {ruby@192.168.0.15:1812 (RADIUS)} [GUI] User login failed
- : 3 : 2016-10-30 01:28:33 +0000 info {root@localhost} [GUI] User logged out
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 6] : test_non_root_user_authentication_without_any_RADIUS_authority
- Test Description : SG.T.5.16 Test authentication of non-root user with no RADIUS authority configured
- Status : Pass
- Duration : 28
- stdout : ERROR: Element not clickable. Key: 'auth_checkbox_secondary_enabled', XPATH: '//*[@id="Authority2Enabled"]'
- : Server log messages:
- : 1 : 2016-10-30 01:22:21 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:22:20 +0000 notice {beryl} [GUI] User login failed: No RADIUS authority available
- : 3 : 2016-10-30 01:22:19 +0000 notice {ruby} [GUI] User login failed: No RADIUS authority available
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 6] : test_non_root_user_authentication_with_secondary_RADIUS_authority
- Test Description : SG.T.5.20 Test authentication with secondary authority
- Status : Pass
- Duration : 233
- stdout : Server log messages:
- : 1 : 2016-10-30 01:23:33 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:23:32 +0000 info {beryl@192.168.0.15:1812 (RADIUS)} [GUI] User login failed
- : 3 : 2016-10-30 01:22:44 +0000 info {root@localhost} [GUI] User logged out
- : Server log messages:
- : 1 : 2016-10-30 01:24:20 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:24:20 +0000 info {ruby@192.168.0.15:1812 (RADIUS)} [GUI] User logged in from 192.168.0.6
- : 3 : 2016-10-30 01:23:34 +0000 info {root@localhost} [GUI] User logged out
- : Server log messages:
- : 1 : 2016-10-30 01:25:25 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:25:24 +0000 info {ruby@192.168.0.13:1812 (RADIUS)} [GUI] User login failed
- : 3 : 2016-10-30 01:24:36 +0000 info {root@localhost} [GUI] User logged out
- : Server log messages:
- : 1 : 2016-10-30 01:26:12 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:26:11 +0000 info {beryl@192.168.0.13:1812 (RADIUS)} [GUI] User logged in from 192.168.0.6
- : 3 : 2016-10-30 01:25:26 +0000 info {root@localhost} [GUI] User logged out
- :
- stderr :
- : Warning: run() received nonzero return code 3 while executing 'systemctl is-active radiusd.service'!
- :
- :
- : Warning: run() received nonzero return code 3 while executing 'systemctl is-active radiusd.service'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 6 / 6] : test_non_root_user_authentication_with_only_primary_RADIUS_authority
- Test Description : SG.T.5.17 Test authentication of non-root user with only primary RADIUS authority configured
- Status : Pass
- Duration : 43
- stdout : Server log messages:
- : 1 : 2016-10-30 01:26:37 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:26:36 +0000 info {beryl@192.168.0.13:1812 (RADIUS)} [GUI] User logged out
- : 3 : 2016-10-30 01:26:35 +0000 info {beryl@192.168.0.13:1812 (RADIUS)} [GUI] User logged in from 192.168.0.6
- : Server log messages:
- : 1 : 2016-10-30 01:26:40 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:26:40 +0000 info {ruby@192.168.0.13:1812 (RADIUS)} [GUI] User login failed
- : 3 : 2016-10-30 01:26:38 +0000 info {root@localhost} [GUI] User logged out
- : Server log messages:
- : 1 : 2016-10-30 01:26:54 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:26:53 +0000 info {ruby@192.168.0.15:1812 (RADIUS)} [GUI] User logged out
- : 3 : 2016-10-30 01:26:53 +0000 info {ruby@192.168.0.15:1812 (RADIUS)} [GUI] User logged in from 192.168.0.6
- : Server log messages:
- : 1 : 2016-10-30 01:26:57 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:26:56 +0000 info {beryl@192.168.0.15:1812 (RADIUS)} [GUI] User login failed
- : 3 : 2016-10-30 01:26:55 +0000 info {root@localhost} [GUI] User logged out
- :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 9 / 30] : test-devices-detail-syncbox-u
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesDetailSyncBOX
- Description : SG.T.7.5 Detail (SyncBOX-u)
- Tests : 16
- --------------------------------------------------------------------------------
- Test [ 1 / 16] : test_device_status_widgets_operation
- Test Description : SG.T.7.5.16 Device status widgets operation
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 16] : test_request_device_reset
- Test Description : SG.T.7.5.11 Request a device reset
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 16] : test_visible_masters_detail_page_contents
- Test Description : SG.T.7.5.8 Visible Masters detail page contents
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 16] : test_diagnostic_data_page_layout
- Test Description : SG.T.7.5.9 Verify diagnostic data page layout
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 16] : test_device_detail_page_layout
- Test Description : SG.T.7.5.1 Device detail page layout
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 16] : test_ptp_ports_tab_contents
- Test Description : SG.T.7.5.4 'PTP ports' tab contents
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 16] : test_device_unreachable_notification
- Test Description : SG.T.7.5.15 Device unreachable notification
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 16] : test_request_new_diagnostic_data
- Test Description : SG.T.7.5.10 Request new diagnostic data
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 16] : test_general_tab_contents
- Test Description : SG.T.7.5.2 'General' tab contents
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 10 / 16] : test_managing_custom_fields
- Test Description : SG.T.7.5.14 Managing custom fields
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 11 / 16] : test_plls_tab_contents
- Test Description : SG.T.7.5.7 'PLLs' tab contents
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 12 / 16] : test_clock_io_tab_contents
- Test Description : SG.T.7.5.5 'Clock I/O' tab contents
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 13 / 16] : test_physical_ports_tab_contents
- Test Description : SG.T.7.5.3 'Physical ports' tab contents
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 14 / 16] : test_reset_packet_counters
- Test Description : SG.T.7.5.13 Reset packet counters
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 15 / 16] : test_gnss_tab_contents
- Test Description : SG.T.7.5.6 'GNSS' tab contents
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 16 / 16] : test_display_serial_numbers
- Test Description : SG.T.7.5.12 Display of serial numbers
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 10 / 30] : test-user-roles
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestUserRoles
- Description : SG.T.5 User authentication - User roles specified on RADIUS server - Admin, Expert, User and Viewer with atleast one user in each category.
- Tests : 29
- --------------------------------------------------------------------------------
- Test [ 1 / 29] : test_device_metrics_details_visibility
- Test Description : SG.T.5.23.9 Device metrics details can be viewed by all user roles
- Status : Error
- Duration : 88
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : ERROR: Element not clickable. Key: 'lnk_back_to_device_detail', XPATH: '//*[@id="SUCCEEDED"]/ul/li[2]/a'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : 'NoneType' object has no attribute 'click'
- --------------------------------------------------------------------------------
- Test [ 2 / 29] : test_device_metrics_configuration
- Test Description : SG.T.5.23.10 Device metrics can be configured only by Admin or Expert users
- Status : Pass
- Duration : 135
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : ERROR: Element could not be found. Key: 'pmc_button_Change', XPATH: '//*[@id="config_show_btn"]'
- : ERROR: Element could not be found. Key: 'pmc_button_Change', XPATH: '//*[@id="config_show_btn"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 3 / 29] : test_device_upgrade
- Test Description : SG.T.5.23.16 Devices can be upgraded only by Admin or Expert users
- Status : Fail
- Duration : 81
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : v2 Fail: "Direct" button not displayed on "Upgrade" submenu for user admin
- --------------------------------------------------------------------------------
- Test [ 4 / 29] : test_device_descriptive_fields
- Test Description : SG.T.5.23.17 Device descriptive fields can be set only by Admin or Expert users
- Status : Pass
- Duration : 158
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : ERROR: Key: 'add_custom_field_dialog_label' not found in 'Detail' dictionary.
- : ERROR: Element could not be found. Key: 'value_custom_field_Site_code', XPATH: '//*[@id="custom_field_Site_code"]/td[2]'
- : ERROR: Key: 'add_custom_field_dialog_label' not found in 'Detail' dictionary.
- : ERROR: Element could not be found. Key: 'value_custom_field_Site_code', XPATH: '//*[@id="custom_field_Site_code"]/td[2]'
- : ERROR: Element could not be found. Key: 'general_button_add_custom_details', XPATH: '//*[@id="btnShowCustomFieldDialog"]'
- : ERROR: Element could not be found. Key: 'general_button_add_custom_details', XPATH: '//*[@id="btnShowCustomFieldDialog"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 5 / 29] : test_device_generic_details_view
- Test Description : SG.T.5.23.23 Device generic details can be viewed by all user roles
- Status : Pass
- Duration : 89
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : Device detail tabs for user admin : General, Physical ports, PTP ports, Clock I/O, GNSS, PLLs
- : Device detail tabs for user expert : General, Physical ports, PTP ports, Clock I/O, GNSS, PLLs
- : Device detail tabs for user user : General, Physical ports, PTP ports, Clock I/O, GNSS, PLLs
- : Device detail tabs for user viewer : General, Physical ports, PTP ports, Clock I/O, GNSS, PLLs
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 6 / 29] : test_device_notifications
- Test Description : SG.T.5.23.25 Device notifications can be viewed by all user roles
- Status : Pass
- Duration : 111
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : Device (192.168.0.14:10001) is healthy with 0 alarms and was last updated 3 seconds ago for user admin
- : 6 device alarms reported for user admin
- : 6 device alarms reported for user expert
- : 6 device alarms reported for user user
- : 6 device alarms reported for user viewer
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 7 / 29] : test_device_statistics_reset
- Test Description : SG.T.5.23.14 Device statistics can not be reset by Viewer users
- Status : Pass
- Duration : 181
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- :
- : Following "Visible Masters" were found on "slave1 tab acceptable masters list" for user admin
- : 1 : Master 1 (in use)
- : 2 : Master 2
- :
- : Following "Reset counter" buttons was found in acceptable masters list on "slave1 tab" for user admin
- :
- : Following "Visible Masters" were found on "slave2 tab acceptable masters list" for user admin
- : 1 : Master 1
- : 2 : Master 2 (in use)
- :
- : Following "Reset counter" buttons was found in acceptable masters list on "slave2 tab" for user admin
- :
- : Following "Visible Masters" were found on "slave1 tab acceptable masters list" for user expert
- : 1 : Master 1 (in use)
- : 2 : Master 2
- :
- : Following "Reset counter" buttons was found in acceptable masters list on "slave1 tab" for user expert
- :
- : Following "Visible Masters" were found on "slave2 tab acceptable masters list" for user expert
- : 1 : Master 1
- : 2 : Master 2 (in use)
- :
- : Following "Reset counter" buttons was found in acceptable masters list on "slave2 tab" for user expert
- :
- : Following "Visible Masters" were found on "slave1 tab acceptable masters list" for user user
- : 1 : Master 1 (in use)
- : 2 : Master 2
- :
- : Following "Reset counter" buttons was found in acceptable masters list on "slave1 tab" for user user
- :
- : Following "Visible Masters" were found on "slave2 tab acceptable masters list" for user user
- : 1 : Master 1
- : 2 : Master 2 (in use)
- :
- : Following "Reset counter" buttons was found in acceptable masters list on "slave2 tab" for user user
- :
- : Following "Visible Masters" were found on "slave1 tab acceptable masters list" for user viewer
- : 1 : Master 1 (in use)
- : 2 : Master 2
- : ERROR: Element could not be found. Key: 'button_reset_counters', XPATH: '//*[@id="reset_ptp_counters"]'
- :
- : No "Reset counters" button was found in acceptable masters list on "slave1 tab" for user viewer
- :
- : Following "Visible Masters" were found on "slave2 tab acceptable masters list" for user viewer
- : 1 : Master 1
- : 2 : Master 2 (in use)
- : ERROR: Element could not be found. Key: 'button_reset_counters', XPATH: '//*[@id="reset_ptp_counters"]'
- :
- : No "Reset counters" button was found in acceptable masters list on "slave2 tab" for user viewer
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 8 / 29] : test_manage_devices
- Test Description : SG.T.5.23.8 Devices can not be managed by Viewer users
- Status : Pass
- Duration : 100
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : ERROR: Element could not be found. Key: 'general_button_begin_managing', XPATH: '//*[@id="btnBeginManaging"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 9 / 29] : test_device_slave_tab_details_visibility
- Test Description : SG.T.5.23.4 Device slave tab details can be viewed by all user roles
- Status : Pass
- Duration : 111
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- :
- : Following "Visible Masters" were found on "Slave-1 tab acceptable masters list" for user admin
- : 1 : Master 1 (in use)
- : 2 : Master 2
- :
- : Following "Visible Masters" were found on "Slave-1 tab acceptable masters list" for user expert
- : 1 : Master 1 (in use)
- : 2 : Master 2
- :
- : Following "Visible Masters" were found on "Slave-1 tab acceptable masters list" for user user
- : 1 : Master 1 (in use)
- : 2 : Master 2
- :
- : Following "Visible Masters" were found on "Slave-1 tab acceptable masters list" for user viewer
- : 1 : Master 1 (in use)
- : 2 : Master 2
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 10 / 29] : test_device_list_visibility
- Test Description : SG.T.5.23.2 Device list can be viewed by all user roles
- Status : Pass
- Duration : 86
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : Found device 192.168.0.14:10001 listed for user admin
- : Found device 192.168.0.14:10002 listed for user admin
- : Device table headers for user admin : Name, Type, Serial, Site code, Location, Management address
- :
- : Found device 192.168.0.14:10001 listed for user expert
- : Found device 192.168.0.14:10002 listed for user expert
- : Device table headers for user expert : Name, Type, Serial, Site code, Location, Management address
- :
- : Found device 192.168.0.14:10001 listed for user user
- : Found device 192.168.0.14:10002 listed for user user
- : Device table headers for user user : Name, Type, Serial, Site code, Location, Management address
- :
- : Found device 192.168.0.14:10001 listed for user viewer
- : Found device 192.168.0.14:10002 listed for user viewer
- : Device table headers for user viewer : Name, Type, Serial, Site code, Location, Management address
- :
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 11 / 29] : test_device_details_visibility
- Test Description : SG.T.5.23.3 Device details can be viewed by all user roles
- Status : Error
- Duration : 118
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : Tab "General" clickable in device details for user admin
- : Tab "Physical ports" clickable in device details for user admin
- : Tab "PTP ports" clickable in device details for user admin
- : Tab "Clock I/O" clickable in device details for user admin
- : Tab "GNSS" clickable in device details for user admin
- : Tab "PLLs" clickable in device details for user admin
- :
- : ERROR: Element could not be found. Key: 'input_username', XPATH: '//*[@id="content-container"]/div/div/div/div[2]/form/div[1]/div/input'
- : ERROR: Element could not be found. Key: 'input_password', XPATH: '//*[@id="content-container"]/div/div/div/div[2]/form/div[2]/div/input'
- : ERROR: Element could not be found. Key: 'button_login', XPATH: '//*[@id="content-container"]/div/div/div/div[2]/form/div[3]/button'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : 'NoneType' object has no attribute 'click'
- --------------------------------------------------------------------------------
- Test [ 12 / 29] : test_device_alarm_acknowledgement
- Test Description : SG.T.5.23.20 Device alarms can not be acknowledged by Viewer users
- Status : Pass
- Duration : 129
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : Found "Ack." and "Sel." options on the "Alarm history" table for user admin
- : Found "Ack." and "Sel." options on the "Alarm history" table for user expert
- : Found "Ack." and "Sel." options on the "Alarm history" table for user user
- : ERROR: Element could not be found. Key: 'table_header_acknowledge', XPATH: '//*[@id="alarm_list"]/thead/tr/th[6]'
- : ERROR: Element could not be found. Key: 'table_header_selectall', XPATH: '//*[@id="alarm_list"]/thead/tr/th[7]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 13 / 29] : test_remove_devices
- Test Description : SG.T.5.23.7 Devices can only be deleted by Admin or Expert users
- Status : Pass
- Duration : 135
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : ERROR: Element could not be found. Key: 'button_delete_devices', XPATH: '//*[@id="deviceDeleteButton"]'
- : ERROR: Element could not be found. Key: 'checkbox_checkall', XPATH: '//*[@id="discoveredDevicesTable"]/thead/tr/th[8]/input'
- : ERROR: Element could not be found. Key: 'button_delete_devices', XPATH: '//*[@id="deviceDeleteButton"]'
- : ERROR: Element could not be found. Key: 'checkbox_checkall', XPATH: '//*[@id="discoveredDevicesTable"]/thead/tr/th[8]/input'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 14 / 29] : test_server_log_view_download
- Test Description : SG.T.5.23.28 Server log viewing and download is an Admin only privilege
- Status : Fail
- Duration : 25
- stdout :
- stderr :
- ExceptionError : <selenium.webdriver.remote.webelement.WebElement (session="288cc29b1dd1aabff1c8e4c3c7db536d", element="0.6316418667794126-2")> is not None : v4 Fail: No "Server -> Log" menu item was displayed for user "expert"
- --------------------------------------------------------------------------------
- Test [ 15 / 29] : test_add_devices
- Test Description : SG.T.5.23.6 Devices can only be added by Admin or Expert users
- Status : Pass
- Duration : 81
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 -i eth1 -s990003 --mgmt-port=10003 --metrics-port=20003 -p/tmp/pipe_sbsim3 -i eth1 -s990004 --mgmt-port=10004 --metrics-port=20004 -p/tmp/pipe_sbsim4 -i eth1 -s990005 --mgmt-port=10005 --metrics-port=20005 -p/tmp/pipe_sbsim5 &> /dev/null &
- : ERROR: Element could not be found. Key: 'button_add_devices', XPATH: '//*[@id="btn-add-devices"]'
- : ERROR: Element could not be found. Key: 'button_add_devices', XPATH: '//*[@id="btn-add-devices"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 16 / 29] : test_device_diagnostics_view
- Test Description : SG.T.5.23.11 Device diagnostics can be viewed by all user roles
- Status : Pass
- Duration : 143
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- :
- : Following historical diagnostics were found on the "Diagnostic data" tab for device 192.168.0.14:10001 for user admin
- : 1 : 2016-10-30 02:17:10 +0000 succeeded 2.8 KB
- : 2 : 2016-10-30 02:17:09 +0000 succeeded 2.8 KB
- : 3 : 2016-10-30 02:17:09 +0000 succeeded 2.8 KB
- :
- : Following historical diagnostics were found on the "Diagnostic data" tab for device 192.168.0.14:10001 for user expert
- : 1 : 2016-10-30 02:17:10 +0000 succeeded 2.8 KB
- : 2 : 2016-10-30 02:17:09 +0000 succeeded 2.8 KB
- : 3 : 2016-10-30 02:17:09 +0000 succeeded 2.8 KB
- :
- : Following historical diagnostics were found on the "Diagnostic data" tab for device 192.168.0.14:10001 for user user
- : 1 : 2016-10-30 02:17:10 +0000 succeeded 2.8 KB
- : 2 : 2016-10-30 02:17:09 +0000 succeeded 2.8 KB
- : 3 : 2016-10-30 02:17:09 +0000 succeeded 2.8 KB
- :
- : Following historical diagnostics were found on the "Diagnostic data" tab for device 192.168.0.14:10001 for user viewer
- : 1 : 2016-10-30 02:17:10 +0000 succeeded 2.8 KB
- : 2 : 2016-10-30 02:17:09 +0000 succeeded 2.8 KB
- : 3 : 2016-10-30 02:17:09 +0000 succeeded 2.8 KB
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 17 / 29] : test_device_diagnostics_configuration
- Test Description : SG.T.5.23.12 Device diagnostics can not be configured by Viewer user
- Status : Pass
- Duration : 117
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- :
- : Following historical diagnostics were found on the "Diagnostic data" tab for device 192.168.0.14:10001 for user admin
- : 01:45:46+0000 : queued
- :
- : Following historical diagnostics were found on the "Diagnostic data" tab for device 192.168.0.14:10001 for user expert
- : 01:45:55+0000 : queued
- : 01:45:46+0000 : succeeded
- :
- : Following historical diagnostics were found on the "Diagnostic data" tab for device 192.168.0.14:10001 for user user
- : 01:45:55+0000 : succeeded
- : 01:45:46+0000 : succeeded
- : 01:46:03+0000 : queued
- : ERROR: Element could not be found. Key: 'diagnostic_button_request_data', XPATH: '//*[@id="content"]/form/button'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 18 / 29] : test_device_alarms
- Test Description : SG.T.5.23.19 Device alarms can be viewed by all user roles
- Status : Pass
- Duration : 102
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- :
- : Following "Device Alarms" were found on "Alarm history" table for device 192.168.0.14:10001 for user admin
- : 1 : 2016-10-30 01:47:42 +0000 (ongoing) 6200-990001 (192.168.0.14) Node Time PLL 2 in holdover
- : 2 : 2016-10-30 01:47:41 +0000 (ongoing) 6200-990001 (192.168.0.14) Node Time PLL 1 in holdover
- : 3 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) PTP PLL 2 in holdover
- : 4 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) PTP PLL 1 in holdover
- : 5 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) Clock PLL 2 in holdover
- : 6 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) Clock PLL 1 in holdover
- :
- : Following "Device Alarms" were found on "Alarm history" table for device 192.168.0.14:10001 for user expert
- : 1 : 2016-10-30 01:47:42 +0000 (ongoing) 6200-990001 (192.168.0.14) Node Time PLL 2 in holdover
- : 2 : 2016-10-30 01:47:41 +0000 (ongoing) 6200-990001 (192.168.0.14) Node Time PLL 1 in holdover
- : 3 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) PTP PLL 2 in holdover
- : 4 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) PTP PLL 1 in holdover
- : 5 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) Clock PLL 2 in holdover
- : 6 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) Clock PLL 1 in holdover
- :
- : Following "Device Alarms" were found on "Alarm history" table for device 192.168.0.14:10001 for user user
- : 1 : 2016-10-30 01:47:42 +0000 (ongoing) 6200-990001 (192.168.0.14) Node Time PLL 2 in holdover
- : 2 : 2016-10-30 01:47:41 +0000 (ongoing) 6200-990001 (192.168.0.14) Node Time PLL 1 in holdover
- : 3 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) PTP PLL 2 in holdover
- : 4 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) PTP PLL 1 in holdover
- : 5 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) Clock PLL 2 in holdover
- : 6 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) Clock PLL 1 in holdover
- :
- : Following "Device Alarms" were found on "Alarm history" table for device 192.168.0.14:10001 for user viewer
- : 1 : 2016-10-30 01:47:42 +0000 (ongoing) 6200-990001 (192.168.0.14) Node Time PLL 2 in holdover
- : 2 : 2016-10-30 01:47:41 +0000 (ongoing) 6200-990001 (192.168.0.14) Node Time PLL 1 in holdover
- : 3 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) PTP PLL 2 in holdover
- : 4 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) PTP PLL 1 in holdover
- : 5 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) Clock PLL 2 in holdover
- : 6 : 2016-10-30 01:47:40 +0000 (ongoing) 6200-990001 (192.168.0.14) Clock PLL 1 in holdover
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 19 / 29] : test_device_group_configuration
- Test Description : SG.T.5.23.18 Device group configuration can be set only by Admin or Expert users
- Status : Pass
- Duration : 136
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : Device group name set to "Devices owned by admin"
- : Device group name set to "Devices owned by expert"
- : ERROR: Element could not be found. Key: 'device_group_popup', XPATH: '//*[@id="groupNameDialog"]/div/div'
- : ERROR: Element could not be found. Key: 'device_group_popup', XPATH: '//*[@id="groupNameDialog"]/div/div'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 20 / 29] : test_snmp_configuration
- Test Description : SG.T.5.23.27 SNMP configuration can only be performed by Admin or Expert users
- Status : Pass
- Duration : 48
- stdout : Visible tabs for user "admin" : General,SNMP,Authorities,Monitoring,Login banner
- : Current SNMP targets:
- : 192.168.55.23
- : Current SNMP targets after deleting "192.168.55.23" :
- : "SNMP" tab visible for user expert
- : Current SNMP targets:
- : 192.168.55.23
- : Current SNMP targets after deleting "192.168.55.23" :
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 21 / 29] : test_QuTC_device_set_holdover
- Test Description : SG.T.5.23.15 QuTC devices can not be set to holdover by Viewer users
- Status : Pass
- Duration : 154
- stdout : I'm a QuTC variant of SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 -q &> /dev/null &
- : ERROR: Element could not be found. Key: 'general_button_maintenance', XPATH: '//*[@id="maintenanceButton"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 22 / 29] : test_device_reset
- Test Description : SG.T.5.23.13 Devices can not be reset by Viewer users
- Status : Pass
- Duration : 133
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : ERROR: Element could not be found. Key: 'general_button_maintenance', XPATH: '//*[@id="maintenanceButton"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 23 / 29] : test_alarms_log_download
- Test Description : SG.T.5.23.29 Alarms logs can be download by all user roles
- Status : Pass
- Duration : 117
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : 6 Device alarms were displayed in "Alarm history" for user "admin"
- :
- : Alarms log for user admin
- : ['2016-10-30 01:52:55', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Node Time PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:54', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Node Time PLL 1 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:54', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'PTP PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:53', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'PTP PLL 1 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:53', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Clock PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:52', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Clock PLL 1 in holdover', 'unacknowledged']
- : Removing "C:\tmp\selenium\syncgem-alarm-log.csv" for user admin
- : 6 Device alarms were displayed in "Alarm history" for user "expert"
- :
- : Alarms log for user expert
- : ['2016-10-30 01:52:55', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Node Time PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:54', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Node Time PLL 1 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:54', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'PTP PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:53', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'PTP PLL 1 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:53', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Clock PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:52', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Clock PLL 1 in holdover', 'unacknowledged']
- : Removing "C:\tmp\selenium\syncgem-alarm-log.csv" for user expert
- : 6 Device alarms were displayed in "Alarm history" for user "user"
- :
- : Alarms log for user user
- : ['2016-10-30 01:52:55', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Node Time PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:54', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Node Time PLL 1 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:54', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'PTP PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:53', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'PTP PLL 1 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:53', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Clock PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:52', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Clock PLL 1 in holdover', 'unacknowledged']
- : Removing "C:\tmp\selenium\syncgem-alarm-log.csv" for user user
- : 6 Device alarms were displayed in "Alarm history" for user "viewer"
- :
- : Alarms log for user viewer
- : ['2016-10-30 01:52:55', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Node Time PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:54', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Node Time PLL 1 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:54', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'PTP PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:53', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'PTP PLL 1 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:53', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Clock PLL 2 in holdover', 'unacknowledged']
- : ['2016-10-30 01:52:52', 'Alert', '', '6200-990001', '6200-990001 (192.168.0.14)', 'Clock PLL 1 in holdover', 'unacknowledged']
- : Removing "C:\tmp\selenium\syncgem-alarm-log.csv" for user viewer
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 24 / 29] : test_device_configuration_history
- Test Description : SG.T.5.23.24 Device configuration history can not be seen by Viewer users
- Status : Pass
- Duration : 87
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : ERROR: Element not clickable. Key: 'button_jobs', XPATH: '//div[@id="navbarResponsive"]/ul/li[2]/a/span'
- : On changing browser url to http://192.168.0.12/configure/showHistory, "Not authorised to access this action" message displayed for user viewer
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 25 / 29] : test_device_master_tab_details_visibility
- Test Description : SG.T.5.23.5 Device master tab details can be viewed by all user roles
- Status : Pass
- Duration : 144
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- :
- : Following "Slaves" were found on "Master-1 tab connected slaves list" for user admin
- : 1 : Slave 1 (192.0.2.1)
- : 2 : Slave 2 (192.0.2.2)
- : 3 : Slave 3 (192.0.2.3)
- : 4 : Slave 4 (192.0.2.4)
- : 5 : Slave 5 (192.0.2.5)
- : 6 : Slave 6 (192.0.2.6)
- : 7 : Slave 7 (192.0.2.7)
- :
- : Following "Slaves" were found on "Master-1 tab connected slaves list" for user expert
- : 1 : Slave 1 (192.0.2.1)
- : 2 : Slave 2 (192.0.2.2)
- : 3 : Slave 3 (192.0.2.3)
- : 4 : Slave 4 (192.0.2.4)
- : 5 : Slave 5 (192.0.2.5)
- : 6 : Slave 6 (192.0.2.6)
- : 7 : Slave 7 (192.0.2.7)
- :
- : Following "Slaves" were found on "Master-1 tab connected slaves list" for user user
- : 1 : Slave 1 (192.0.2.1)
- : 2 : Slave 2 (192.0.2.2)
- : 3 : Slave 3 (192.0.2.3)
- : 4 : Slave 4 (192.0.2.4)
- : 5 : Slave 5 (192.0.2.5)
- : 6 : Slave 6 (192.0.2.6)
- : 7 : Slave 7 (192.0.2.7)
- :
- : Following "Slaves" were found on "Master-1 tab connected slaves list" for user viewer
- : 1 : Slave 1 (192.0.2.1)
- : 2 : Slave 2 (192.0.2.2)
- : 3 : Slave 3 (192.0.2.3)
- : 4 : Slave 4 (192.0.2.4)
- : 5 : Slave 5 (192.0.2.5)
- : 6 : Slave 6 (192.0.2.6)
- : 7 : Slave 7 (192.0.2.7)
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 26 / 29] : test_set_server_configuration
- Test Description : SG.T.5.23.26 Server configuration is an Admin only privilege
- Status : Pass
- Duration : 66
- stdout : Visible tabs for user "admin" : General,SNMP,Authorities,Monitoring,Login banner
- : Save settings mesage for user "admin" : Success: Server settings saved
- : Save settings mesage for user "admin" : Success: Authority changes saved
- : Directories monitored by SyncGEM daemon:
- : /var/log
- : /var/lib/mysql
- : /tmp
- : Save settings mesage for user "admin" : Banner configuration change successful
- : "SNMP" tab visible for user expert
- : On changing browser url to http://192.168.0.12/server/promptSettings, "Not authorised to access this action" message displayed for user user
- : On changing browser url to http://192.168.0.12/server/promptSettings, "Not authorised to access this action" message displayed for user viewer
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 27 / 29] : test_set_device_configuration
- Test Description : SG.T.5.23.22 Device configurations can not be set by Viewer users
- Status : Pass
- Duration : 150
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : Device detail tabs for user admin : General, Physical ports, PTP ports, Clock I/O, GNSS, PLLs
- :
- : Device configuration page has "Apply to this device" button for user admin
- : Device configuration tabs for user admin : Physical ports, PTP ports, Clock I/O, GNSS, PLLs, ESMC
- : Device configuration status message :"The configuration was saved, and will be applied to the device when it next becomes both managed and reachable" for user admin
- :
- : Device detail tabs for user expert : General, Physical ports, PTP ports, Clock I/O, GNSS, PLLs
- :
- : Device configuration page has "Apply to this device" button for user expert
- : Device configuration tabs for user expert : Physical ports, PTP ports, Clock I/O, GNSS, PLLs, ESMC
- : Device configuration status message :"The configuration was saved, and will be applied to the device when it next becomes both managed and reachable" for user expert
- :
- : Device detail tabs for user user : General, Physical ports, PTP ports, Clock I/O, GNSS, PLLs
- :
- : Device configuration page has "Apply to this device" button for user user
- : Device configuration tabs for user user : Physical ports, PTP ports, Clock I/O, GNSS, PLLs, ESMC
- : Device configuration status message :"The configuration was saved, and will be applied to the device when it next becomes both managed and reachable" for user user
- :
- : Device detail tabs for user viewer : General, Physical ports, PTP ports, Clock I/O, GNSS, PLLs
- : ERROR: Element could not be found. Key: 'general_button_conf_manager', XPATH: '//*[@id="btnCreateNewConfig"]'
- : ERROR: Element could not be found. Key: 'general_button_configuration', XPATH: '//*[@id="configureButton"]'
- : On changing browser url to http://192.168.0.12/configure/prompt, "Not authorised to access this action" message displayed for user viewer
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 28 / 29] : test_local_user_root_admin_role
- Test Description : SG.T.5.23.1 Local user root has Admin user role
- Status : Pass
- Duration : 75
- stdout : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 -i eth1 -s990003 --mgmt-port=10003 --metrics-port=20003 -p/tmp/pipe_sbsim3 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 29 / 29] : test_SyncGEM_login_page
- Test Description : SG.T.5.23.21 SyncGEM login page is visible to all
- Status : Pass
- Duration : 30
- stdout : "Login" button displayed on the "Login page" for SyncGEM (@192.168.0.12)
- :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 11 / 30] : test-daemon
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDaemon
- Description : SG.T.3 Daemon test cases
- Tests : 13
- --------------------------------------------------------------------------------
- Test [ 1 / 13] : test_SyncGEM_daemon_running_on_startup
- Test Description : SG.T.3.1 SyncGEM daemon is running on start-up
- Status : Pass
- Duration : 56
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 13] : test_SyncGEM_restart_inactive_daemon
- Test Description : SG.T.3.11 Restart an inactive syncgemd service
- Status : Pass
- Duration : 49
- stdout :
- stderr :
- : Warning: run() received nonzero return code 3 while executing 'set -m; service syncgemd status'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 3 / 13] : test_SyncGEM_stop_inactive_daemon
- Test Description : SG.T.3.10 Attempt to stop an already-inactive syncgemd service
- Status : Pass
- Duration : 57
- stdout :
- stderr :
- : Warning: run() received nonzero return code 3 while executing 'set -m; service syncgemd status'!
- :
- :
- : Warning: run() received nonzero return code 3 while executing 'set -m; service syncgemd status'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 4 / 13] : test_SyncGEM_binaries_install
- Test Description : SG.T.3.2 SyncGEM binaries are correctly installed
- Status : Pass
- Duration : 0
- stdout :
- : Following files were installed in /usr/local/bin/ directory on the SyncGEM server with perm 755:
- : 1 : syncgem-update-db.sh
- : 2 : syncgem-backup-database.sh
- : 3 : syncgem-create-db-first-install.sh
- : 4 : syncgem-dd
- : 5 : syncgem-metrics-converter-anthorn
- : 6 : syncgem-metrics-converter
- : 7 : syncgemd
- : 8 : syncgem-debug-register-writer
- : 9 : syncgem-set-root-passwd.sh
- : 10 : syncgem-set-selinux-policy.sh
- : 11 : syncgem-drop-and-create-db-user.sh
- : 12 : syncgem-debug-register-reader
- : 13 : syncgem-validate-conf
- :
- : Following files were installed in /usr/local/bin/ directory on the SyncGEM server with perm 644:
- : 1 : syncgem-include.sh
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 13] : test_SyncGEM_version_number
- Test Description : SG.T.3.3 SyncGEM daemon has correct version number
- Status : Pass
- Duration : 0
- stdout :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'syncgemd -v'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 6 / 13] : test_SyncGEM_daemon_debug_trace
- Test Description : SG.T.3.13 No debug trace log files opened
- Status : Pass
- Duration : 0
- stdout :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'ls -lh /proc/$(pgrep syncgemd)/fd | grep "/tmp/"'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 7 / 13] : test_SyncGEM_daemon_logging_status
- Test Description : SG.T.3.7 Logging of syncgemd service status in /var/log/messages
- Status : Pass
- Duration : 1
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 13] : test_SyncGEM_allows_only_single_daemon_instance
- Test Description : SG.T.3.6 Multiple instances of SyncGEM daemon should not run at the same time
- Status : Pass
- Duration : 1
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 13] : test_SyncGEM_daemon_shutdown_without_db_service
- Test Description : SG.T.3.8 SyncGEM shuts down if mysqld service is not running
- Status : Pass
- Duration : 236
- stdout :
- stderr :
- : Warning: run() received nonzero return code 3 while executing 'set -m; service mysqld status'!
- :
- :
- : Warning: run() received nonzero return code 1 while executing 'set -m; service syncgemd status'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 10 / 13] : test_SyncGEM_firewall_rules
- Test Description : SG.T.3.9 Firewall rules
- Status : Pass
- Duration : 49
- stdout : Open tcp ports : ['22', '80', '2000']
- : Open udp ports : ['161', '2000', '2001']
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 11 / 13] : test_SyncGEM_can_connect_to_networked_device
- Test Description : SG.T.3.5 SyncGEM server can connect to an existing device over the network
- Status : Pass
- Duration : 3
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 12 / 13] : test_SyncGEM_has_network_connectivity
- Test Description : SG.T.3.4 SyncGEM server has network connectivity
- Status : Pass
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 13 / 13] : test_SyncGEM_restart_active_daemon
- Test Description : SG.T.3.12 Restart an active syncgemd service
- Status : Pass
- Duration : 47
- stdout : SyncGEM pid : old = 1440 new = 1542
- :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 12 / 30] : test-devices-firmware-upgrade
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesFirmwareUpgrade
- Description : SG.T.7.12 Firmware upgrade
- Tests : 20
- --------------------------------------------------------------------------------
- Test [ 1 / 20] : test_tftp_method_upgrade_single_device
- Test Description : SG.T.7.12.15 TFTP Method: Test upgrade for single device
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 20] : test_tftp_method_filename_is_31_chars_or_less
- Test Description : SG.T.7.12.14 TFTP method: File name length must be 31 characters or less
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 20] : test_uploading_invalid_firmware_file
- Test Description : SG.T.7.12.3 Uploading an invalid firmware file
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 20] : test_tftp_method_invalid_server_address
- Test Description : SG.T.7.12.10 TFTP method: Invalid TFTP server address
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 20] : test_tftp_method_valid_port_number
- Test Description : SG.T.7.12.12 TFTP method: Test validation for port number
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 20] : test_apply_firmware_button_enabled_when_one_more_devices_selected
- Test Description : SG.T.7.12.19 'Apply firmware' button only enables when one or more devices are selected for upgrade
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 20] : test_uploading_an_already_existing_firmware_file
- Test Description : SG.T.7.12.5 Uploading an already existing firmware file
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 20] : test_tftp_method_valid_server_address
- Test Description : SG.T.7.12.11 TFTP method: Valid TFTP server address
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 20] : test_upgrade_page_is_navigable_via_keyboard
- Test Description : SG.T.7.12.20 Ensure page is navigable via the keyboard
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 10 / 20] : test_tftp_method_ensure_details_retained
- Test Description : SG.T.7.12.17 TFTP Method: Ensure TFTP details are retained
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 11 / 20] : test_uploading_unsupported_firmware_file
- Test Description : SG.T.7.12.4 Uploading an unsupported firmware file
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 12 / 20] : test_remove_firmware_file
- Test Description : SG.T.7.12.6 Removing a firmware file
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 13 / 20] : test_mmapi_method_upgrade_multiple_devices
- Test Description : SG.T.7.12.9 MMAPI method: Upgrade multiple devices
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 14 / 20] : test_remove_button_only_enabled_when_firmware_version_selected
- Test Description : SG.T.7.12.18 'Remove' button only enabled when a firmware version is selected
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 15 / 20] : test_tftp_method_upgrade_multiple_devices
- Test Description : SG.T.7.12.16 TFTP Method: Test upgrade for multiple devices
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 16 / 20] : test_tftp_method_filename_extension_for_tarball
- Test Description : SG.T.7.12.13 TFTP method: Test file name validation for .tar.gz extension
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 17 / 20] : test_upgrade_page_layout
- Test Description : SG.T.7.12.1 Verify upgrade page layout
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 18 / 20] : test_unmanaged_devices_cannot_be_selected_for_upgrade
- Test Description : SG.T.7.12.7 Unmanaged devices can not be selected for upgrade
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 19 / 20] : test_uploading_valid_firmware_file
- Test Description : SG.T.7.12.2 Uploading a valid firmware file
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 20 / 20] : test_mmapi_method_upgrade_single_device
- Test Description : SG.T.7.12.8 MMAPI method: Upgrade single device
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 13 / 30] : test-server-log
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestServerLog
- Description : SG.T.6 Server
- Tests : 8
- --------------------------------------------------------------------------------
- Test [ 1 / 8] : test_download_log_entries_as_csv
- Test Description : SG.T.6.1.5 Download log entries as CSV
- Status : Fail
- Duration : 16
- stdout :
- stderr :
- ExceptionError : False is not true : v1 Fail: Expected browser download dialog to open.
- --------------------------------------------------------------------------------
- Test [ 2 / 8] : test_view_extended_log_details
- Test Description : SG.T.6.1.2 View extended log details
- Status : Pass
- Duration : 42
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 8] : test_syncgem_log_filtering
- Test Description : SG.T.6.1.3 SyncGEM log filtering
- Status : Pass
- Duration : 26
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 8] : test_syncgem_manager_logging_traps
- Test Description : SG.T.6.1.7 GUI sends syncgemManagerLogging traps for critical/error messages
- Status : Error
- Duration : 43
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'add_devices_by_ip_success_alert', XPATH: '//*[@id="tabs-2"]/div[contains(@class, "alert-success")]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : 'NoneType' object has no attribute 'text'
- --------------------------------------------------------------------------------
- Test [ 5 / 8] : test_syncgem_log_pagination
- Test Description : SG.T.6.1.4 SyncGEM log pagination
- Status : Pass
- Duration : 85
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 8] : test_chris
- Test Description : test chris
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 8] : test_log_messages_are_mirrored_to_system_log
- Test Description : SG.T.6.1.6 Log messages generated by GUI are mirrored to the system log
- Status : Error
- Duration : 31
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'add_devices_by_ip_success_alert', XPATH: '//*[@id="tabs-2"]/div[contains(@class, "alert-success")]'
- :
- stderr :
- ExceptionError : 'NoneType' object has no attribute 'text'
- --------------------------------------------------------------------------------
- Test [ 8 / 8] : test_display_syncgem_log
- Test Description : SG.T.6.1.1 Display SyncGEM log
- Status : Pass
- Duration : 34
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 14 / 30] : test-cookies
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestCookies
- Description : SG.T.5.22 User authentication - Cookies
- Tests : 2
- --------------------------------------------------------------------------------
- Test [ 1 / 2] : test_delete_cookie_user_redirected
- Test Description : SG.T.5.22.2 Delete cookie, user is redirected to login page before requested page
- Status : Pass
- Duration : 19
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 2] : test_cookie_expiry
- Test Description : SG.T.5.22.1 Cookie expiry
- Status : Pass
- Duration : 12
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 15 / 30] : test-devices-management
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesManagement
- Description : SG.T.7.4 Management
- Tests : 17
- --------------------------------------------------------------------------------
- Test [ 1 / 17] : test_config_cancelled_on_startup_when_previously_orphaned
- Test Description : SG.T.7.4.15 Configuration cancelled on startup when previously orphaned
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 17] : test_add_and_remove_profiles
- Test Description : SG.T.7.4.16 Adding and removing profiles
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 17] : test_config_for_undiscovered_device_applied_when_discovered
- Test Description : SG.T.7.4.13 Configuration for undiscovered device is applied once device is discovered
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 17] : test_devices_unmanaged_by_default
- Test Description : SG.T.7.4.1 Devices are unmanaged by default
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 17] : test_begin_management_of_externally_change_device_triggers_config_regeneration
- Test Description : SG.T.7.4.6 Beginning management of device (whose configuration has changed externally) triggers regeneration of configuration
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 17] : test_config_for_managed_and_reachable_device_applied_immediately
- Test Description : SG.T.7.4.10 Configuration for managed and reachable device is immediately applied
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 17] : test_config_for_unmanaged_and_unreachable_device_not_applied_when_reachable
- Test Description : SG.T.7.4.12 Configuration for unmanaged and unreachable device is not applied once device is reachable
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 17] : test_config_for_managed_but_unreachable_device_applied_when_reachable
- Test Description : SG.T.7.4.11 Configuration for managed but unreachable device is applied once device is reachable
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 17] : test_reset_of_managed_device_triggers_remanagement
- Test Description : SG.T.7.4.9 Reset of managed device triggers remanagement
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 10 / 17] : test_begin_management_of_device_with_deferred_config
- Test Description : SG.T.7.4.3 Begin management of device with deferred configuration
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 11 / 17] : test_reset_of_managed_device_where_config_erased_triggers_config_regeneration
- Test Description : SG.T.7.4.8 Reset of managed device (whose configuration has been erased) triggers regeneration of configuration
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 12 / 17] : test_only_managed_devices_report_device_alarms
- Test Description : SG.T.7.4.5 Only managed devices report device alarms
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 13 / 17] : test_begin_management_of_device_with_no_config
- Test Description : SG.T.7.4.2 Begin management of device with no configuration
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 14 / 17] : test_begin_management_of_device_with_prior_config
- Test Description : SG.T.7.4.4 Beginning management of device with prior configuration
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 15 / 17] : test_begin_management_of_device_not_changed_externally_does_not_trigger_config_regeneration
- Test Description : SG.T.7.4.7 Beginning management of device (whose configuration has not changed externally) does not trigger regeneration of configuration
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 16 / 17] : test_config_survives_temp_loss_of_comms
- Test Description : SG.T.7.4.14 Configuration survives temporary loss of comms
- Status : Pass
- Duration : 10
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 17 / 17] : test_import_from_and_export_to_files
- Test Description : SG.T.7.4.17 Importing from and exporting to files
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 16 / 30] : test-SyncGEM-root-password-script
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestSyncGEMRootPasswordScript
- Description : SG.T.5 User authentication - syncgem-set-root-passwd.sh conditions
- Tests : 7
- --------------------------------------------------------------------------------
- Test [ 1 / 7] : test_set_root_user_password
- Test Description : SG.T.5.10 Set/change the password for SyncGEM GUIӳ root
- Status : Pass
- Duration : 11
- stdout :
- : Following output lines were received while setting "SyncGEM root password" as root user:
- : 1 : spawn /usr/local/bin/syncgem-set-root-passwd.sh
- : 2 : INFO: No database configuration file given, looking for file: /var/syncgem/db.conf
- : 3 : When prompted, please provide a password to set the SyncGEM root web account.
- : 4 : New password: *******
- : 5 : Re-type new password: *******
- : 6 : Setting password for SyncGEM user 'root'
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 7] : test_root_user_authentication_after_fresh_database_install
- Test Description : SG.T.5.9 Test root user authentication with no password after installation
- Status : Pass
- Duration : 18
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 7] : test_root_user_user_authentication
- Test Description : SG.T.5.12 Test root user authentication
- Status : Pass
- Duration : 14
- stdout : Server log messages:
- : 1 : 2016-10-30 01:30:01 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 2 : 2016-10-30 01:30:00 +0000 info {root@localhost} [GUI] User logged out
- : 3 : 2016-10-30 01:29:59 +0000 info {root@localhost} [GUI] User logged in from 192.168.0.6
- : 4 : 2016-10-30 01:29:59 +0000 info {root@localhost} [GUI] Root login attempted while account disabled
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 7] : test_change_root_password_as_non_root_user
- Test Description : SG.T.5.11 Change the root password as non root user
- Status : Pass
- Duration : 11
- stdout :
- : Following output lines were received while setting "SyncGEM root password" as non-root user:
- : 1 : spawn /usr/local/bin/syncgem-set-root-passwd.sh
- : 2 : ERROR: This script must be run as root
- : 3 : send: spawn id exp4 not open
- : 4 : while executing
- : 5 : "send "$password\r""
- : 6 : (file "/home/test/set-syncgem-password.sh" line 11)
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing '/home/test/set-syncgem-password.sh chr0n0s'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 5 / 7] : test_root_user_user_authentication_with_changed_password
- Test Description : SG.T.5.13 Test root user authentication with changed password
- Status : Pass
- Duration : 16
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 7] : test_change_root_user_password_when_database_daemon_not_running
- Test Description : SG.T.5.14 Changing root user password when mysqld is not running
- Status : Pass
- Duration : 16
- stdout :
- : Following output lines were received while setting "SyncGEM root password" as root user when mysqld service was stopped:
- : 1 : spawn /usr/local/bin/syncgem-set-root-passwd.sh
- : 2 : ERROR: mysqld is stopped!
- : 3 : Please start mysqld and try again.
- : 4 : send: spawn id exp4 not open
- : 5 : while executing
- : 6 : "send "$password\r""
- : 7 : (file "/root/set-syncgem-password.sh" line 11)
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing '/root/set-syncgem-password.sh chr0n0s'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 7 / 7] : test_change_root_user_password_when_syncgem_database_does_not_exist
- Test Description : SG.T.5.15 Changing rootӳ password when syncgem database doesnӴ exist
- Status : Pass
- Duration : 12
- stdout :
- : Following output lines were received while setting "SyncGEM root password" as root user when syncgem database was dropped:
- : 1 : spawn /usr/local/bin/syncgem-set-root-passwd.sh
- : 2 : INFO: No database configuration file given, looking for file: /var/syncgem/db.conf
- : 3 : When prompted, please provide a password to set the SyncGEM root web account.
- : 4 : New password: *******
- : 5 : Re-type new password: *******
- : 6 : ERROR: syncgem database not found
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'mysql -se "show databases;" | grep syncgem'!
- :
- :
- --------------------------------------------------------------------------------
- Module [ 17 / 30] : test-other-syncbox-alarms
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestOtherSyncBoxAlarms
- Description : SG.T.10.6 Other SyncBOX Alarms
- Tests : 7
- --------------------------------------------------------------------------------
- Test [ 1 / 7] : test_syncboxCsSteeringAlarm
- Test Description : SG.T.10.6.6 syncboxCsSteeringAlarm
- Status : Fail
- Duration : 128
- stdout : I'm a QuTC variant of SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 -q &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 4 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 2 / 7] : test_syncboxCsHealthAlarm
- Test Description : SG.T.10.6.7 syncboxCsHealthAlarm
- Status : Fail
- Duration : 135
- stdout : I'm a QuTC variant of SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 -q &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 20 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 3 / 7] : test_syncboxPpsLos
- Test Description : SG.T.10.6.5 syncboxPpsLos
- Status : Fail
- Duration : 128
- stdout : I'm a QuTC variant of SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 -q &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 8 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 4 / 7] : test_syncboxLinkDown
- Test Description : SG.T.10.6.4 syncboxLinkDown
- Status : Fail
- Duration : 136
- stdout : I'm a QuTC variant of SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 -q &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 10 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 5 / 7] : test_syncboxPowerInterrupted
- Test Description : SG.T.10.6.3 syncboxPowerInterrupted
- Status : Fail
- Duration : 130
- stdout : I'm a QuTC variant of SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 -q &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 8 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 6 / 7] : test_syncboxGnssOscillatorError
- Test Description : SG.T.10.6.2 syncboxGnssOscillatorError
- Status : Fail
- Duration : 54
- stdout : I'm a QuTC variant of SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 -q &> /dev/null &
- : ERROR: Element could not be found. Key: 'table_row_by_serial_number', XPATH: '//*[@id="discoveredDevicesTable"]/tbody/tr[td[4]/text()="6210-123456"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Error: Could not find device "6210-123456" in device list
- --------------------------------------------------------------------------------
- Test [ 7 / 7] : test_syncboxGnssLossOfLock
- Test Description : SG.T.10.6.1 syncboxGnssLossOfLock
- Status : Fail
- Duration : 125
- stdout : I'm a QuTC variant of SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 -q &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 2 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Module [ 18 / 30] : test-syncbox-ptp-alarms
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestSyncBoxPtpAlarms
- Description : SG.T.10.4 SyncBOX PTP Alarms
- Tests : 13
- --------------------------------------------------------------------------------
- Test [ 1 / 13] : test_syncboxPtpMasterRefusedRequest_delay
- Test Description : SG.T.10.4.5 syncboxPtpMasterRefusedRequest - delay request/response
- Status : Fail
- Duration : 144
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 40 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 2 / 13] : test_syncboxPtpMasterSentTooFewMessages_follow
- Test Description : SG.T.10.4.12 syncboxPtpMasterSentTooFewMessages - follow-up
- Status : Fail
- Duration : 143
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 40 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 3 / 13] : test_syncboxPtpMasterIgnoredRequest_announce
- Test Description : SG.T.10.4.9 syncboxPtpMasterIgnoredRequest - announce
- Status : Expected Failure
- Duration : 141
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- --------------------------------------------------------------------------------
- Test [ 4 / 13] : test_syncboxPtpPortNotOperational
- Test Description : SG.T.10.4.1 syncboxPtpPortNotOperational
- Status : Fail
- Duration : 127
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 8 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 5 / 13] : test_syncboxPtpMasterSentTooFewMessages_delay
- Test Description : SG.T.10.4.11 syncboxPtpMasterSentTooFewMessages - delay request/response
- Status : Fail
- Duration : 54
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'table_row_by_serial_number', XPATH: '//*[@id="discoveredDevicesTable"]/tbody/tr[td[4]/text()="6200-123456"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Error: Could not find device "6200-123456" in device list
- --------------------------------------------------------------------------------
- Test [ 6 / 13] : test_syncboxPtpMasterRefusedRequest_announce
- Test Description : SG.T.10.4.6 syncboxPtpMasterRefusedRequest - announce
- Status : Expected Failure
- Duration : 141
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- --------------------------------------------------------------------------------
- Test [ 7 / 13] : test_syncboxPtpPathDelayTooManyMessages
- Test Description : SG.T.10.4.3 syncboxPtpPathDelayTooManyMessages
- Status : Fail
- Duration : 128
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 16 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 8 / 13] : test_syncboxPtpMasterSentTooFewMessages_sync
- Test Description : SG.T.10.4.10 syncboxPtpMasterSentTooFewMessages - sync
- Status : Fail
- Duration : 141
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 40 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 9 / 13] : test_syncboxPtpPathDelayTooFewMessages
- Test Description : SG.T.10.4.2 syncboxPtpPathDelayTooFewMessages
- Status : Fail
- Duration : 129
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 16 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 10 / 13] : test_syncboxPtpMasterSentTooFewMessages_announce
- Test Description : SG.T.10.4.13 syncboxPtpMasterSentTooFewMessages - announce
- Status : Expected Failure
- Duration : 141
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- --------------------------------------------------------------------------------
- Test [ 11 / 13] : test_syncboxPtpMasterIgnoredRequest_delay
- Test Description : SG.T.10.4.8 syncboxPtpMasterIgnoredRequest - delay request/response
- Status : Fail
- Duration : 143
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 40 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 12 / 13] : test_syncboxPtpMasterIgnoredRequest_sync
- Test Description : SG.T.10.4.7 syncboxPtpMasterIgnoredRequest - sync
- Status : Fail
- Duration : 141
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 40 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Test [ 13 / 13] : test_syncboxPtpMasterRefusedRequest_sync
- Test Description : SG.T.10.4.4 syncboxPtpMasterRefusedRequest - sync
- Status : Fail
- Duration : 145
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.16-22\notifications.txt already exists and is being overwritten.
- :
- :
- : Warning: Local file F:\workplace\selenium-test-automation\scripts\test-helpers\syncgem-selenium\tests\root@192.168.0.17-22\notifications.txt already exists and is being overwritten.
- :
- :
- ExceptionError : 0 != 40 : Fail. Did not get the expected number of traps.
- --------------------------------------------------------------------------------
- Module [ 19 / 30] : test-login-banner
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestLoginBanner
- Description : SG.T.6.6 Login banner
- Tests : 4
- --------------------------------------------------------------------------------
- Test [ 1 / 4] : test_login_banner_tab_layout
- Test Description : SG.T.6.6.1 Tab layout
- Status : Pass
- Duration : 17
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 4] : test_invalid_characters_in_banner_text
- Test Description : SG.T.6.6.3 Invalid characters in banner text
- Status : Pass
- Duration : 19
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 4] : test_enable_disable_login_banner
- Test Description : SG.T.6.6.2 Enable/disable login banner
- Status : Pass
- Duration : 32
- stdout : ERROR: Element could not be found. Key: 'login_banner', XPATH: '//*[@id="loginBanner"]'
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 4] : test_empty_banner_text
- Test Description : SG.T.6.6.4 Empty banner text
- Status : Pass
- Duration : 30
- stdout : ERROR: Element could not be found. Key: 'login_banner', XPATH: '//*[@id="loginBanner"]'
- :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 20 / 30] : test-devices-alarm-generation
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesAlarmGeneration
- Description : SG.T.7.10 Alarm generation
- Tests : 2
- --------------------------------------------------------------------------------
- Test [ 1 / 2] : test_syncbox_alarm_simulation
- Test Description : SG.T.7.10.1 SyncBOX-u alarm simulation
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 2] : test_qutc_alarm_simulation
- Test Description : SG.T.7.10.2 QuTC alarm simulation
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 21 / 30] : test-inform-unreachable-target
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestInformUnreachableTarget
- Description : SG.T.10.7 Sending inform notification to an unreachable SNMP target
- Tests : 1
- --------------------------------------------------------------------------------
- Test [ 1 / 1] : test_inform_unreachable_target
- Test Description : Sending inform notification to an unreachable SNMP target
- Status : Fail
- Duration : 55
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s123456 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'table_row_by_serial_number', XPATH: '//*[@id="discoveredDevicesTable"]/tbody/tr[td[4]/text()="6200-123456"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Error: Could not find device "6200-123456" in device list
- --------------------------------------------------------------------------------
- Module [ 22 / 30] : test-devices-metrics-collection
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesMetricsCollection
- Description : SG.T.7.13 Metrics collection
- Tests : 13
- --------------------------------------------------------------------------------
- Test [ 1 / 13] : test_device_performance_data_collection_custom_params
- Test Description : SG.T.7.13.4 Device Performance data collection with custom parameters
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 13] : test_log_file_graphing
- Test Description : SG.T.7.13.10 Log file graphing
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 13] : test_collection_tab_layout_and_behaviour
- Test Description : SG.T.7.13.1 Collection tab layout & behaviour
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 13] : test_accelerated_device_performance_data_collection
- Test Description : SG.T.7.13.5 Accelerated Device Performance data collection
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 13] : test_logs_tab_layout_and_behaviour
- Test Description : SG.T.7.13.2 Logs tab layout & behaviour
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 6 / 13] : test_performance_data_collection_with_default_params
- Test Description : SG.T.7.13.3 Performance data collection with default parameters
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 13] : test_switch_to_delay_measurement_data_collection
- Test Description : SG.T.7.13.8 Switching to Delay Measurement data collection
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 13] : test_log_file_expiry_effected_periodically
- Test Description : SG.T.7.13.13 Log file expiry effected periodically
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 13] : test_caesium_steering_data_collection
- Test Description : SG.T.7.13.9 Caesium steering data collection
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 10 / 13] : test_alter_device_performance_data_collection_params_during_collection
- Test Description : SG.T.7.13.7 Altering Device Performance data collection parameters during collection
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 11 / 13] : test_log_file_expiry_on_startup
- Test Description : SG.T.7.13.12 Log file expiry on startup
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 12 / 13] : test_log_file_rotation
- Test Description : SG.T.7.13.11 Log file rotation
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 13 / 13] : test_cancel_accelerated_device_performance_data_collection
- Test Description : SG.T.7.13.6 Cancelling accelerated Device Performance data collection
- Status : Pass
- Duration : 8
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Module [ 23 / 30] : test-login-page
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestLoginPage
- Description : SG.T.5 User authentication - Login page layout
- Tests : 11
- --------------------------------------------------------------------------------
- Test [ 1 / 11] : test_account_lockout_after_successive_failed_attempts
- Test Description : SG.T.5.4 Account lockout after successive failed attempts
- Status : Skipped
- Duration : 0
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 11] : test_deny_access_to_invalid_user
- Test Description : SG.T.5.2 Deny access to invalid users
- Status : Pass
- Duration : 13
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 3 / 11] : test_redirect_to_login_prompt_by_accessing_url
- Test Description : SG.T.5.5.3 Accessing web pages by direct URL entry
- Status : Pass
- Duration : 12
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 11] : test_user_credentials
- Test Description : SG.T.5.1 Allow users to enter credentials
- Status : Pass
- Duration : 12
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 11] : test_redirect_to_login_prompt_after_idle_timeout_expiry
- Test Description : SG.T.5.5.2 After idle timeout expiry
- Status : Error
- Duration : 90
- stdout : ERROR: Element not clickable. Key: 'dialog_user_idle_button_cancel', XPATH: '//*[@id="idlePrompt"]/div/div/div[3]/button'
- :
- stderr :
- ExceptionError : 'NoneType' object has no attribute 'click'
- --------------------------------------------------------------------------------
- Test [ 6 / 11] : test_SyncGEM_version_display_on_pages
- Test Description : SG.T.5.7 SyncGEM version is displayed
- Status : Pass
- Duration : 16
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 11] : test_redirect_to_login_prompt_after_user_logged_out
- Test Description : SG.T.5.5.4 After user has previously logged out
- Status : Pass
- Duration : 10
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 8 / 11] : test_deny_access_if_no_user_role_set
- Test Description : SG.T.5.3 Deny access if no user role set
- Status : Pass
- Duration : 19
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 9 / 11] : test_SyncGEM_favicon
- Test Description : SG.T.5.8 Existence of the branded browser icon
- Status : Pass
- Duration : 9
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 10 / 11] : test_appearance_of_login_screen
- Test Description : SG.T.5.6 Appearance of login screen
- Status : Pass
- Duration : 9
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 11 / 11] : test_redirect_to_login_prompt_after_session_expiry
- Test Description : SG.T.5.5.1 After session expiry
- Status : Fail
- Duration : 19
- stdout :
- stderr :
- ExceptionError : v2 Fail: Expected to be logged out.
- --------------------------------------------------------------------------------
- Module [ 24 / 30] : test-devices-list
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestDevicesList
- Description : SG.T.7.1 List
- Tests : 10
- --------------------------------------------------------------------------------
- Test [ 1 / 10] : test_discover_devices_with_existing_undiscovered_devices
- Test Description : SG.T.7.1.10 Manually discover multiple devices: With existing undiscovered devices
- Status : Pass
- Duration : 83
- stdout : Successfully added device with serial number "6200-100001"
- : Following devices exist in the device list:
- : 1 : 6200-100001 has IP = "(unknown)"
- : Successfully added device with serial number "6200-100001" to the device list
- : Sucessfully created :C:/tmp/selenium/device-ips.txt
- : Successfully added devices from C:/tmp/selenium/device-ips.txt
- : Following devices are now present in the device list:
- : 1 : - Awaiting discovery - - - 192.0.2.1
- : 2 : - Awaiting discovery - - - 192.0.2.2
- : 3 : - Awaiting discovery - - - 192.0.2.3
- : 4 : 6200-100001 SyncBOX-u 6200-100001 - - (unknown)
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 2 / 10] : test_discover_devices_no_file_selected
- Test Description : SG.T.7.1.5 Manually discover multiple devices: no file selected
- Status : Pass
- Duration : 15
- stdout : Empty devices batch file for upload validated with message - "Please upload a file containing the management IP addresses of the new devices."
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 3 / 10] : test_discover_devices_invalid_large_batch_file
- Test Description : SG.T.7.1.8 Manually discover multiple devices: invalid batch file (large filesize)
- Status : Pass
- Duration : 37
- stdout : Sucessfully created :C:/tmp/selenium/device-ips.txt
- : Very large content devices batch file for upload validated with message - "Failed to add devices - Content too long; maximum support is 1024000 bytes, but you submitted 1024188 bytes."
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 4 / 10] : test_discover_devices_valid_batch_file_newline_delimited
- Test Description : SG.T.7.1.9 Manually discover multiple devices: valid batch file (newlines)
- Status : Pass
- Duration : 71
- stdout : Sucessfully created :C:/tmp/selenium/device-ips.txt
- : Successfully added devices from C:/tmp/selenium/device-ips.txt
- : Following devices were added to the device list:
- : 192.0.2.1 has status = "Awaiting discovery"
- : 192.0.2.2 has status = "Awaiting discovery"
- : 192.0.2.3 has status = "Awaiting discovery"
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 5 / 10] : test_discover_device_valid_ip_and_reachable
- Test Description : SG.T.7.1.3 Manually discover single device: valid IP and device reachable
- Status : Pass
- Duration : 55
- stdout : Successfully added device with ip "192.168.0.14:10001"
- : 192.168.0.14:10001 has status = "Awaiting discovery"
- : I'm a regular SyncBOX
- : Firewalld active: True
- : firewalld is running; opening ports
- : Firewalld active: True
- : firewalld is running; opening ports
- : syncbox-simulator -i eth1 -s990001 --mgmt-port=10001 --metrics-port=20001 -p/tmp/pipe_sbsim1 -i eth1 -s990002 --mgmt-port=10002 --metrics-port=20002 -p/tmp/pipe_sbsim2 &> /dev/null &
- : 192.168.0.14:10001 has status = "SyncBOX-u 0v0"
- : "192.168.0.14:10001" ip validated with message - "Failed to add device: A device with this host has already been discovered"
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 6 / 10] : test_discover_devices_invalid_content_batch_file
- Test Description : SG.T.7.1.6 Manually discover multiple devices: invalid batch file (file with arbitrary data)
- Status : Pass
- Duration : 38
- stdout : Sucessfully created :C:/tmp/selenium/device-ips.txt
- : Invalid content devices batch file for upload validated with message - "Failed to add devices - One or more hosts in the file were invalid (abcdefg-hijklm)"
- :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 7 / 10] : test_devices_list_page_layout_no_devices_present
- Test Description : SG.T.7.1.1 Devices List page layout with no devices present
- Status : Pass
- Duration : 21
- stdout :
- : Following breadcrumb were found on the "Device list" page:
- : 1 : Devices
- :
- : Following widgets were found on the "Device list" page: Devices, Undiscovered, No comms, Alarming
- : Device table displaying : "No data available in table"
- : Device list page displaying "Add devices" button
- : Device list page displaying "Export list" button
- : Device table shows : "Showing 0 to 0 of 0 entries"
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 8 / 10] : test_discover_device_invalid_ip_address
- Test Description : SG.T.7.1.2 Manually discover single device: invalid IP addresses
- Status : Pass
- Duration : 18
- stdout : "" ip validated with message - "Please enter the management IP address of the new device."
- : "qwerty" ip validated with message - "Invalid IP Address. Please enter an IPv4 address in the form a.b.c.d. Broadcast (x.x.x.255) / (0.x.x.x), loopback (127.x.x.x) and addresses ending x.x.x.0 are not permitted."
- : "192.168.1" ip validated with message - "Invalid IP Address. Please enter an IPv4 address in the form a.b.c.d. Broadcast (x.x.x.255) / (0.x.x.x), loopback (127.x.x.x) and addresses ending x.x.x.0 are not permitted."
- : "0.0.0.0" ip validated with message - "Invalid IP Address. Please enter an IPv4 address in the form a.b.c.d. Broadcast (x.x.x.255) / (0.x.x.x), loopback (127.x.x.x) and addresses ending x.x.x.0 are not permitted."
- : "255.255.255.255" ip validated with message - "Invalid IP Address. Please enter an IPv4 address in the form a.b.c.d. Broadcast (x.x.x.255) / (0.x.x.x), loopback (127.x.x.x) and addresses ending x.x.x.0 are not permitted."
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 9 / 10] : test_discover_device_valid_ip_but_unreachable
- Test Description : SG.T.7.1.4 Manually discover single device: valid IP but device not reachable
- Status : Pass
- Duration : 38
- stdout : 192.0.2.1 has status = "Awaiting discovery"
- : 192.0.2.1 still has status = "Awaiting discovery"
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Test [ 10 / 10] : test_discover_devices_invalid_empty_batch_file
- Test Description : SG.T.7.1.7 Manually discover multiple devices: invalid batch file (empty file)
- Status : Pass
- Duration : 37
- stdout : Sucessfully created :C:/tmp/selenium/device-ips.txt
- : Found "device-ips.txt" in file upload widget
- : Device table shows : "Showing 0 to 0 of 0 entries"
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- --------------------------------------------------------------------------------
- Module [ 25 / 30] : test-gui-behaviour
- Classes : 1
- --------------------------------------------------------------------------------
- Class [ 1 / 1] : TestGUIBehaviour
- Description : SG.T.4 GUI behaviour test cases
- Tests : 22
- --------------------------------------------------------------------------------
- Test [ 1 / 22] : test_HTML5_login_page_compliance
- Test Description : SG.T.4.1.1 HTML5 Compliance - Login page
- Status : Pass
- Duration : 12
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 2 / 22] : test_HTML5_device_configuration_compliance
- Test Description : SG.T.4.1.9 HTML5 Compliance - Device configuration
- Status : Fail
- Duration : 34
- stdout : ERROR: line: 195 -> Element ԤivԠnot allowed as child of element ԯlԠin this context. (Suppressing further errors from this subtree.)
- : ERROR: line: 204 -> The ԷidthԠattribute on the ԴdԠelement is obsolete. Use CSS instead.
- : ERROR: line: 207 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 493 -> Table column 3 established by element ԴdԠhas no cells beginning in it.
- : ERROR: line: 507 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 508 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 509 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 516 -> Element ԩnputԠis missing one or more of the following attributes: ԴypeԮ
- : ERROR: line: 682 -> Table column 3 established by element ԴdԠhas no cells beginning in it.
- : ERROR: line: 696 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 697 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 698 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 704 -> Element ԩnputԠis missing one or more of the following attributes: ԴypeԮ
- : ERROR: line: 869 -> Table column 3 established by element ԴdԠhas no cells beginning in it.
- : ERROR: line: 883 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 884 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 885 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 892 -> Element ԩnputԠis missing one or more of the following attributes: ԴypeԮ
- : ERROR: line: 1059 -> Table column 3 established by element ԴdԠhas no cells beginning in it.
- : ERROR: line: 1073 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 1074 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 1075 -> The ԷidthԠattribute on the ԴhԠelement is obsolete. Use CSS instead.
- : ERROR: line: 1082 -> Element ԩnputԠis missing one or more of the following attributes: ԴypeԮ
- : ERROR: line: 1370 -> Bad value ԴextԠfor attribute ԴypeԠon element ԩnputԮ
- : ERROR: line: 1496 -> Bad value ԴextԠfor attribute ԴypeԠon element ԩnputԮ
- : ERROR: line: 1702 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 1739 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 1774 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 1806 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 1841 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 1873 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2207 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2250 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2293 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2336 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2379 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2421 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2468 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2510 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2555 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2598 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2657 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2693 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2729 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2765 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2801 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2837 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2873 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2909 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2945 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 2981 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 3017 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 3053 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 3089 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 3125 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 3161 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- : ERROR: line: 3197 -> Element ԤivԠis missing required attribute ԡria-expandedԮ
- :
- stderr :
- ExceptionError : 57 != 0 : v1 Fail: Page has 57 HTML validation errors
- --------------------------------------------------------------------------------
- Test [ 3 / 22] : test_HTML5_device_diagnostic_compliance
- Test Description : SG.T.4.1.11 HTML5 Compliance - Device diagnostic data
- Status : Fail
- Duration : 29
- stdout : ERROR: line: 185 -> Element ԤivԠnot allowed as child of element ԯlԠin this context. (Suppressing further errors from this subtree.)
- :
- stderr :
- ExceptionError : 1 != 0 : v1 Fail: Page has 1 HTML validation errors
- --------------------------------------------------------------------------------
- Test [ 4 / 22] : test_HTML5_server_log_compliance
- Test Description : SG.T.4.1.16 HTML5 Compliance - Server log
- Status : Pass
- Duration : 12
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 5 / 22] : test_HTML5_device_history_compliance
- Test Description : SG.T.4.1.10 HTML5 Compliance - Device history
- Status : Fail
- Duration : 25
- stdout : ERROR: line: 196 -> Element ԤivԠnot allowed as child of element ԯlԠin this context. (Suppressing further errors from this subtree.)
- :
- stderr :
- ExceptionError : 1 != 0 : v1 Fail: Page has 1 HTML validation errors
- --------------------------------------------------------------------------------
- Test [ 6 / 22] : test_HTML5_device_visible_masters_compliance
- Test Description : SG.T.4.1.13 HTML5 Compliance - Device visible masters
- Status : Fail
- Duration : 65
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s111111 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'group_syncbox_devices', XPATH: '//*[@id="grp_SyncBOX_devices-label"]'
- :
- stderr :
- ExceptionError : unexpectedly None : Expected group SyncBOX devices to be present
- --------------------------------------------------------------------------------
- Test [ 7 / 22] : test_HTML5_device_connected_slaves_compliance
- Test Description : SG.T.4.1.14 HTML5 Compliance - Device connected slaves
- Status : Fail
- Duration : 65
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s111112 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'group_syncbox_devices', XPATH: '//*[@id="grp_SyncBOX_devices-label"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Expected group SyncBOX devices to be present
- --------------------------------------------------------------------------------
- Test [ 8 / 22] : test_HTML5_configuration_wait_compliance
- Test Description : SG.T.4.1.18 HTML5 Compliance - Configuration wait
- Status : Fail
- Duration : 65
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s111113 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'group_syncbox_devices', XPATH: '//*[@id="grp_SyncBOX_devices-label"]'
- :
- stderr :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- : Warning: run() received nonzero return code 1 while executing 'killall -q syncbox-simulator'!
- :
- :
- ExceptionError : unexpectedly None : Expected group SyncBOX devices to be present
- --------------------------------------------------------------------------------
- Test [ 9 / 22] : test_HTML5_alarm_history_compliance
- Test Description : SG.T.4.1.4 HTML5 Compliance - Alarm history
- Status : Pass
- Duration : 13
- stdout :
- stderr :
- --------------------------------------------------------------------------------
- Test [ 10 / 22] : test_HTML5_device_job_detail_compliance
- Test Description : SG.T.4.1.5 HTML5 Compliance - Device job detail
- Status : Fail
- Duration : 41
- stdout : ERROR: line: 477 -> ԴdԠstart tag in table body.
- : ERROR: line: 473 -> Table columns in range 2ŵ established by element ԴhԠhave no cells beginning in them.
- : ERROR: line: 477 -> Table column 6 established by element ԴdԠhas no cells beginning in it.
- : ERROR: line: 577 -> ԴdԠstart tag in table body.
- : ERROR: line: 573 -> Table columns in range 2ŵ established by element ԴhԠhave no cells beginning in them.
- : ERROR: line: 577 -> Table column 6 established by element ԴdԠhas no cells beginning in it.
- : ERROR: line: 261 -> The ԡria-controlsԠattribute must point to an element in the same document.
- : ERROR: line: 264 -> The ԡria-controlsԠattribute must point to an element in the same document.
- :
- stderr :
- ExceptionError : 8 != 0 : v1 Fail: Page has 8 HTML validation errors
- --------------------------------------------------------------------------------
- Test [ 11 / 22] : test_HTML5_device_metrics_compliance
- Test Description : SG.T.4.1.8 HTML5 Compliance - Device metrics
- Status : Fail
- Duration : 26
- stdout : ERROR: line: 186 -> Element ԤivԠnot allowed as child of element ԯlԠin this context. (Suppressing further errors from this subtree.)
- : ERROR: line: 466 -> An ԩmgԠelement must have an ԡltԠattribute, except under certain conditions. For details, consult guidance on providing text alternatives for images.
- : ERROR: line: 469 -> An ԩmgԠelement must have an ԡltԠattribute, except under certain conditions. For details, consult guidance on providing text alternatives for images.
- :
- stderr :
- ExceptionError : 3 != 0 : v1 Fail: Page has 3 HTML validation errors
- --------------------------------------------------------------------------------
- Test [ 12 / 22] : test_HTML5_sidebar_ptp_domain_grouping
- Test Description : SG.T.4.1.22 HTML5 Compliance - Sidebar PTP domain grouping
- Status : Fail
- Duration : 67
- stdout : I'm a regular SyncBOX
- : syncbox-simulator -i eth1 -s111114 -p/tmp/pipe_sbsim1 &> /dev/null &
- : ERROR: Element could not be found. Key: 'group_syncbox_devices', XPATH: '//*[@id="grp_SyncBOX_devices-label"]'
- :
- stderr :
- ExceptionError : unexpectedly None : Expected group SyncBOX devices to be present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement