Guest User

dmesg_out

a guest
Jun 12th, 2015
237
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Linux version 3.18.12-gentoo (root@Celeron) (gcc version 4.8.4 (Gentoo 4.8.4 p1.6, pie-0.6.1) ) #1 SMP Fri Jun 12 13:17:49 CEST 2015
  2. [ 0.000000] e820: BIOS-provided physical RAM map:
  3. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  4. [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  5. [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  6. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ffeffff] usable
  7. [ 0.000000] BIOS-e820: [mem 0x000000002fff0000-0x000000002fff2fff] ACPI NVS
  8. [ 0.000000] BIOS-e820: [mem 0x000000002fff3000-0x000000002fffffff] ACPI data
  9. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  10. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  11. [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
  12. [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
  13. [ 0.000000] SMBIOS 2.2 present.
  14. [ 0.000000] DMI: /AB45, BIOS 6.00 PG 08/29/2002
  15. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  16. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  17. [ 0.000000] e820: last_pfn = 0x2fff0 max_arch_pfn = 0x1000000
  18. [ 0.000000] MTRR default type: uncachable
  19. [ 0.000000] MTRR fixed ranges enabled:
  20. [ 0.000000] 00000-9FFFF write-back
  21. [ 0.000000] A0000-EFFFF uncachable
  22. [ 0.000000] F0000-FFFFF write-through
  23. [ 0.000000] MTRR variable ranges enabled:
  24. [ 0.000000] 0 base 000000000 mask FE0000000 write-back
  25. [ 0.000000] 1 base 020000000 mask FF0000000 write-back
  26. [ 0.000000] 2 disabled
  27. [ 0.000000] 3 disabled
  28. [ 0.000000] 4 disabled
  29. [ 0.000000] 5 disabled
  30. [ 0.000000] 6 disabled
  31. [ 0.000000] 7 disabled
  32. [ 0.000000] found SMP MP-table at [mem 0x000f4be0-0x000f4bef] mapped at [c00f4be0]
  33. [ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
  34. [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
  35. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
  36. [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
  37. [ 0.000000] init_memory_mapping: [mem 0x2fc00000-0x2fdfffff]
  38. [ 0.000000] [mem 0x2fc00000-0x2fdfffff] page 2M
  39. [ 0.000000] init_memory_mapping: [mem 0x2c000000-0x2fbfffff]
  40. [ 0.000000] [mem 0x2c000000-0x2fbfffff] page 2M
  41. [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2bffffff]
  42. [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
  43. [ 0.000000] [mem 0x00200000-0x2bffffff] page 2M
  44. [ 0.000000] init_memory_mapping: [mem 0x2fe00000-0x2ffeffff]
  45. [ 0.000000] [mem 0x2fe00000-0x2ffeffff] page 4k
  46. [ 0.000000] BRK [0x01956000, 0x01956fff] PGTABLE
  47. [ 0.000000] BRK [0x01957000, 0x01957fff] PGTABLE
  48. [ 0.000000] RAMDISK: [mem 0x2f1ad000-0x2f5b5fff]
  49. [ 0.000000] ACPI: Early table checksum verification disabled
  50. [ 0.000000] ACPI: RSDP 0x000F6A30 000014 (v00 IntelR)
  51. [ 0.000000] ACPI: RSDT 0x2FFF3000 00002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
  52. [ 0.000000] ACPI: FACP 0x2FFF3040 000074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
  53. [ 0.000000] ACPI: DSDT 0x2FFF30C0 003AB9 (v01 INTELR AWRDACPI 00001000 MSFT 0100000D)
  54. [ 0.000000] ACPI: FACS 0x2FFF0000 000040
  55. [ 0.000000] ACPI: APIC 0x2FFF6B80 000054 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
  56. [ 0.000000] ACPI: Local APIC address 0xfee00000
  57. [ 0.000000] 767MB LOWMEM available.
  58. [ 0.000000] mapped low ram: 0 - 2fff0000
  59. [ 0.000000] low ram: 0 - 2fff0000
  60. [ 0.000000] Zone ranges:
  61. [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
  62. [ 0.000000] Normal [mem 0x01000000-0x2ffeffff]
  63. [ 0.000000] Movable zone start for each node
  64. [ 0.000000] Early memory node ranges
  65. [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
  66. [ 0.000000] node 0: [mem 0x00100000-0x2ffeffff]
  67. [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x2ffeffff]
  68. [ 0.000000] On node 0 totalpages: 196494
  69. [ 0.000000] free_area_init_node: node 0, pgdat c180fb00, node_mem_map ef9f0020
  70. [ 0.000000] DMA zone: 32 pages used for memmap
  71. [ 0.000000] DMA zone: 0 pages reserved
  72. [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
  73. [ 0.000000] Normal zone: 1504 pages used for memmap
  74. [ 0.000000] Normal zone: 192496 pages, LIFO batch:31
  75. [ 0.000000] Using APIC driver default
  76. [ 0.000000] ACPI: PM-Timer IO Port: 0x408
  77. [ 0.000000] ACPI: Local APIC address 0xfee00000
  78. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  79. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  80. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  81. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  82. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  83. [ 0.000000] ACPI: IRQ0 used by override.
  84. [ 0.000000] ACPI: IRQ9 used by override.
  85. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  86. [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
  87. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  88. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  89. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
  90. [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
  91. [ 0.000000] e820: [mem 0x30000000-0xfebfffff] available for PCI devices
  92. [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1
  93. [ 0.000000] PERCPU: Embedded 13 pages/cpu @ef9dd000 s31872 r0 d21376 u53248
  94. [ 0.000000] pcpu-alloc: s31872 r0 d21376 u53248 alloc=13*4096
  95. [ 0.000000] pcpu-alloc: [0] 0
  96. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194958
  97. [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.12-gentoo root=UUID=42de63ad-f75b-4869-a27a-9b7debc14a14 ro
  98. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  99. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  100. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  101. [ 0.000000] Initializing CPU#0
  102. [ 0.000000] Memory: 765184K/785976K available (6500K kernel code, 441K rwdata, 1372K rodata, 532K init, 612K bss, 20792K reserved)
  103. [ 0.000000] virtual kernel memory layout:
  104. fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
  105. vmalloc : 0xf07f0000 - 0xfff8d000 ( 247 MB)
  106. lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
  107. .init : 0xc1822000 - 0xc18a7000 ( 532 kB)
  108. .data : 0xc165947c - 0xc1820580 (1820 kB)
  109. .text : 0xc1000000 - 0xc165947c (6501 kB)
  110. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  111. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  112. [ 0.000000] Hierarchical RCU implementation.
  113. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  114. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  115. [ 0.000000] NR_IRQS:2304 nr_irqs:48 0
  116. [ 0.000000] CPU 0 irqstacks, hard=eec08000 soft=eec0a000
  117. [ 0.000000] Console: colour VGA+ 80x25
  118. [ 0.000000] console [tty0] enabled
  119. [ 0.000000] tsc: Fast TSC calibration using PIT
  120. [ 0.000000] tsc: Detected 1696.986 MHz processor
  121. [ 0.003007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.97 BogoMIPS (lpj=1696986)
  122. [ 0.003167] pid_max: default: 4096 minimum: 301
  123. [ 0.003267] ACPI: Core revision 20140926
  124. [ 0.009710] ACPI: All ACPI Tables successfully acquired
  125. [ 0.010092] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  126. [ 0.010181] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  127. [ 0.010705] CPU0: Hyper-Threading is disabled
  128. [ 0.010802] mce: CPU supports 4 MCE banks
  129. [ 0.010892] CPU0: Thermal monitoring enabled (TM1)
  130. [ 0.011033] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
  131. Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
  132. [ 0.032607] Freeing SMP alternatives memory: 24K (c18a7000 - c18ad000)
  133. [ 0.032879] Enabling APIC mode: Flat. Using 1 I/O APICs
  134. [ 0.033377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  135. [ 0.043488] smpboot: CPU0: Intel(R) Celeron(R) CPU 1.70GHz (fam: 0f, model: 01, stepping: 03)
  136. [ 0.044000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
  137. [ 0.044000] ... version: 0
  138. [ 0.044000] ... bit width: 40
  139. [ 0.044000] ... generic registers: 18
  140. [ 0.044000] ... value mask: 000000ffffffffff
  141. [ 0.044000] ... max period: 0000007fffffffff
  142. [ 0.044000] ... fixed-purpose events: 0
  143. [ 0.044000] ... event mask: 000000000003ffff
  144. [ 0.044245] x86: Booted up 1 node, 1 CPUs
  145. [ 0.044336] smpboot: Total of 1 processors activated (3393.97 BogoMIPS)
  146. [ 0.045040] devtmpfs: initialized
  147. [ 0.045785] PM: Registering ACPI NVS region [mem 0x2fff0000-0x2fff2fff] (12288 bytes)
  148. [ 0.046626] xor: measuring software checksum speed
  149. [ 0.056007] pIII_sse : 2200.000 MB/sec
  150. [ 0.066005] prefetch64-sse: 2776.000 MB/sec
  151. [ 0.066084] xor: using function: prefetch64-sse (2776.000 MB/sec)
  152. [ 0.066187] RTC time: 11:48:01, date: 06/12/15
  153. [ 0.066531] NET: Registered protocol family 16
  154. [ 0.067323] cpuidle: using governor ladder
  155. [ 0.067412] cpuidle: using governor menu
  156. [ 0.067630] ACPI: bus type PCI registered
  157. [ 0.096589] PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=2
  158. [ 0.096677] PCI: Using configuration type 1 for base access
  159. [ 0.126055] raid6: mmxx1 1386 MB/s
  160. [ 0.143031] raid6: mmxx2 1757 MB/s
  161. [ 0.160081] raid6: sse1x1 855 MB/s
  162. [ 0.177020] raid6: sse1x2 1515 MB/s
  163. [ 0.194034] raid6: sse2x1 1632 MB/s
  164. [ 0.211009] raid6: sse2x2 1898 MB/s
  165. [ 0.211091] raid6: using algorithm sse2x2 (1898 MB/s)
  166. [ 0.211168] raid6: using intx1 recovery algorithm
  167. [ 0.211430] ACPI: Added _OSI(Module Device)
  168. [ 0.211514] ACPI: Added _OSI(Processor Device)
  169. [ 0.211591] ACPI: Added _OSI(3.0 _SCP Extensions)
  170. [ 0.211668] ACPI: Added _OSI(Processor Aggregator Device)
  171. [ 0.218916] ACPI: Interpreter enabled
  172. [ 0.219043] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
  173. [ 0.219242] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140926/hwxface-580)
  174. [ 0.219452] ACPI: (supports S0 S1 S4 S5)
  175. [ 0.219531] ACPI: Using IOAPIC for interrupt routing
  176. [ 0.219934] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  177. [ 0.235267] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  178. [ 0.235372] acpi PNP0A03:00: _OSC: OS supports [Segments]
  179. [ 0.235464] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  180. [ 0.235751] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
  181. [ 0.235761] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
  182. [ 0.235767] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  183. [ 0.235773] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
  184. [ 0.235779] acpi PNP0A03:00: host bridge window [mem 0x30000000-0xfebfffff] (ignored)
  185. [ 0.235785] PCI: root bus 00: using default resources
  186. [ 0.235792] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
  187. [ 0.236358] PCI host bridge to bus 0000:00
  188. [ 0.236455] pci_bus 0000:00: root bus resource [bus 00-ff]
  189. [ 0.236537] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  190. [ 0.236619] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
  191. [ 0.236724] pci 0000:00:00.0: [8086:1a30] type 00 class 0x060000
  192. [ 0.236742] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
  193. [ 0.237071] pci 0000:00:01.0: [8086:1a31] type 01 class 0x060400
  194. [ 0.237501] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
  195. [ 0.237571] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
  196. [ 0.237751] pci 0000:00:1d.0: System wakeup disabled by ACPI
  197. [ 0.238026] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
  198. [ 0.238094] pci 0000:00:1d.1: reg 0x20: [io 0xb000-0xb01f]
  199. [ 0.238276] pci 0000:00:1d.1: System wakeup disabled by ACPI
  200. [ 0.238503] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
  201. [ 0.238568] pci 0000:00:1d.2: reg 0x20: [io 0xb400-0xb41f]
  202. [ 0.238735] pci 0000:00:1d.2: System wakeup disabled by ACPI
  203. [ 0.239123] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
  204. [ 0.239161] pci 0000:00:1d.7: reg 0x10: [mem 0xec200000-0xec2003ff]
  205. [ 0.239286] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  206. [ 0.239428] pci 0000:00:1d.7: System wakeup disabled by ACPI
  207. [ 0.239677] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
  208. [ 0.239869] pci 0000:00:1e.0: System wakeup disabled by ACPI
  209. [ 0.240239] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
  210. [ 0.240250] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
  211. * this clock source is slow. If you are sure your timer does not have
  212. * this bug, please use "acpi_pm_good" to disable the workaround
  213. [ 0.240604] pci 0000:00:1f.0: can't claim BAR 7 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
  214. [ 0.240732] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO
  215. [ 0.241106] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
  216. [ 0.241136] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
  217. [ 0.241152] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
  218. [ 0.241167] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
  219. [ 0.241182] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
  220. [ 0.241197] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f]
  221. [ 0.241213] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
  222. [ 0.241232] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
  223. [ 0.241321] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
  224. [ 0.241402] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
  225. [ 0.241484] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
  226. [ 0.241946] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
  227. [ 0.242042] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
  228. [ 0.242343] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
  229. [ 0.242375] pci 0000:00:1f.5: reg 0x10: [io 0xc000-0xc0ff]
  230. [ 0.242390] pci 0000:00:1f.5: reg 0x14: [io 0xc400-0xc43f]
  231. [ 0.242405] pci 0000:00:1f.5: reg 0x18: [mem 0xec201000-0xec2011ff]
  232. [ 0.242419] pci 0000:00:1f.5: reg 0x1c: [mem 0xec202000-0xec2020ff]
  233. [ 0.242493] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
  234. [ 0.242932] pci 0000:01:00.0: [1002:4966] type 00 class 0x030000
  235. [ 0.242968] pci 0000:01:00.0: reg 0x10: [mem 0xe4000000-0xe7ffffff pref]
  236. [ 0.242982] pci 0000:01:00.0: reg 0x14: [io 0x9000-0x90ff]
  237. [ 0.243021] pci 0000:01:00.0: reg 0x18: [mem 0xec020000-0xec02ffff]
  238. [ 0.243058] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
  239. [ 0.243117] pci 0000:01:00.0: supports D1 D2
  240. [ 0.243318] pci 0000:01:00.1: [1002:496e] type 00 class 0x038000
  241. [ 0.243343] pci 0000:01:00.1: reg 0x10: [mem 0xe8000000-0xebffffff pref]
  242. [ 0.243355] pci 0000:01:00.1: reg 0x14: [mem 0xec030000-0xec03ffff]
  243. [ 0.243431] pci 0000:01:00.1: supports D1 D2
  244. [ 0.243595] pci 0000:00:01.0: PCI bridge to [bus 01]
  245. [ 0.243688] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
  246. [ 0.243695] pci 0000:00:01.0: bridge window [mem 0xec000000-0xec0fffff]
  247. [ 0.243702] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xebffffff pref]
  248. [ 0.243847] pci 0000:02:06.0: [10ec:8139] type 00 class 0x020000
  249. [ 0.243877] pci 0000:02:06.0: reg 0x10: [io 0xa000-0xa0ff]
  250. [ 0.243893] pci 0000:02:06.0: reg 0x14: [mem 0xec110000-0xec1100ff]
  251. [ 0.243945] pci 0000:02:06.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  252. [ 0.244023] pci 0000:02:06.0: supports D1 D2
  253. [ 0.244030] pci 0000:02:06.0: PME# supported from D1 D2 D3hot D3cold
  254. [ 0.244316] pci 0000:02:08.0: [1102:0008] type 00 class 0x040100
  255. [ 0.244349] pci 0000:02:08.0: reg 0x10: [io 0xa400-0xa43f]
  256. [ 0.244464] pci 0000:02:08.0: supports D1 D2
  257. [ 0.244667] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
  258. [ 0.244766] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
  259. [ 0.244775] pci 0000:00:1e.0: bridge window [mem 0xec100000-0xec1fffff]
  260. [ 0.244785] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
  261. [ 0.244790] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
  262. [ 0.244813] pci_bus 0000:00: on NUMA node 0
  263. [ 0.245145] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  264. [ 0.245845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  265. [ 0.246552] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  266. [ 0.247475] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
  267. [ 0.248198] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
  268. [ 0.248886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  269. [ 0.249727] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  270. [ 0.250803] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  271. [ 0.254031] vgaarb: setting as boot device: PCI:0000:01:00.0
  272. [ 0.254126] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  273. [ 0.254242] vgaarb: loaded
  274. [ 0.254317] vgaarb: bridge control possible 0000:01:00.0
  275. [ 0.254715] SCSI subsystem initialized
  276. [ 0.255106] libata version 3.00 loaded.
  277. [ 0.255136] ACPI: bus type USB registered
  278. [ 0.255340] usbcore: registered new interface driver usbfs
  279. [ 0.255464] usbcore: registered new interface driver hub
  280. [ 0.255599] usbcore: registered new device driver usb
  281. [ 0.256252] Advanced Linux Sound Architecture Driver Initialized.
  282. [ 0.256386] PCI: Using ACPI for IRQ routing
  283. [ 0.256475] PCI: pci_cache_line_size set to 64 bytes
  284. [ 0.256548] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
  285. [ 0.256556] e820: reserve RAM buffer [mem 0x2fff0000-0x2fffffff]
  286. [ 0.257708] Switched to clocksource refined-jiffies
  287. [ 0.275161] pnp: PnP ACPI init
  288. [ 0.275983] system 00:00: [mem 0x000cd000-0x000cffff] has been reserved
  289. [ 0.276103] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
  290. [ 0.276188] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
  291. [ 0.276271] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
  292. [ 0.276354] system 00:00: [mem 0x2fff0000-0x2fffffff] could not be reserved
  293. [ 0.276437] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
  294. [ 0.276520] system 00:00: [mem 0x00100000-0x2ffeffff] could not be reserved
  295. [ 0.276604] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
  296. [ 0.276687] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
  297. [ 0.276770] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
  298. [ 0.276852] system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
  299. [ 0.276934] system 00:00: [mem 0x000e0000-0x000effff] has been reserved
  300. [ 0.277011] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  301. [ 0.277454] system 00:01: [io 0x0400-0x04bf] could not be reserved
  302. [ 0.277554] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  303. [ 0.278389] system 00:02: [io 0x04d0-0x04d1] has been reserved
  304. [ 0.278483] system 00:02: [io 0x0290-0x029f] has been reserved
  305. [ 0.278565] system 00:02: [io 0x0800-0x0805] has been reserved
  306. [ 0.278652] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  307. [ 0.278837] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  308. [ 0.279250] pnp 00:04: [dma 2]
  309. [ 0.279515] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
  310. [ 0.280189] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
  311. [ 0.281020] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
  312. [ 0.281864] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
  313. [ 0.282438] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
  314. [ 0.282709] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  315. [ 0.283378] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active)
  316. [ 0.284037] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
  317. [ 0.284090] pnp: PnP ACPI: found 12 devices
  318. [ 0.320585] Switched to clocksource acpi_pm
  319. [ 0.320716] pci 0000:00:1f.0: BAR 7: [io 0x0400-0x047f] has bogus alignment
  320. [ 0.320817] pci 0000:00:1e.0: BAR 9: assigned [mem 0x30000000-0x300fffff pref]
  321. [ 0.320937] pci 0000:00:1f.1: BAR 5: assigned [mem 0x30100000-0x301003ff]
  322. [ 0.320937] pci 0000:01:00.0: BAR 6: assigned [mem 0xec000000-0xec01ffff pref]
  323. [ 0.320937] pci 0000:00:01.0: PCI bridge to [bus 01]
  324. [ 0.320937] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
  325. [ 0.320937] pci 0000:00:01.0: bridge window [mem 0xec000000-0xec0fffff]
  326. [ 0.320937] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xebffffff pref]
  327. [ 0.321067] pci 0000:02:06.0: BAR 6: assigned [mem 0x30000000-0x3000ffff pref]
  328. [ 0.321185] pci 0000:00:1e.0: PCI bridge to [bus 02]
  329. [ 0.321266] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
  330. [ 0.321351] pci 0000:00:1e.0: bridge window [mem 0xec100000-0xec1fffff]
  331. [ 0.321435] pci 0000:00:1e.0: bridge window [mem 0x30000000-0x300fffff pref]
  332. [ 0.321557] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  333. [ 0.321563] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
  334. [ 0.321569] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
  335. [ 0.321575] pci_bus 0000:01: resource 1 [mem 0xec000000-0xec0fffff]
  336. [ 0.321580] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xebffffff pref]
  337. [ 0.321586] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
  338. [ 0.321591] pci_bus 0000:02: resource 1 [mem 0xec100000-0xec1fffff]
  339. [ 0.321596] pci_bus 0000:02: resource 2 [mem 0x30000000-0x300fffff pref]
  340. [ 0.321601] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
  341. [ 0.321606] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
  342. [ 0.321674] NET: Registered protocol family 2
  343. [ 0.322519] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  344. [ 0.322650] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  345. [ 0.322798] TCP: Hash tables configured (established 8192 bind 8192)
  346. [ 0.323182] TCP: reno registered
  347. [ 0.323276] UDP hash table entries: 512 (order: 2, 16384 bytes)
  348. [ 0.323378] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  349. [ 0.323610] NET: Registered protocol family 1
  350. [ 0.325642] pci 0000:01:00.0: Video device with shadowed ROM
  351. [ 0.325662] PCI: CLS 32 bytes, default 64
  352. [ 0.325798] Unpacking initramfs...
  353. [ 0.581642] Freeing initrd memory: 4132K (ef1ad000 - ef5b6000)
  354. [ 0.582371] microcode: CPU0 sig=0xf13, pf=0x4, revision=0x3
  355. [ 0.582605] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  356. [ 0.583093] apm: BIOS not found.
  357. [ 0.584072] futex hash table entries: 16 (order: -1, 2048 bytes)
  358. [ 0.584840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  359. [ 0.592794] ntfs: driver 2.1.31 [Flags: R/O].
  360. [ 0.593370] msgmni has been set to 1502
  361. [ 0.595176] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  362. [ 0.595305] io scheduler noop registered
  363. [ 0.595381] io scheduler deadline registered
  364. [ 0.595560] io scheduler cfq registered (default)
  365. [ 0.596313] Non-volatile memory driver v1.3
  366. [ 0.596465] intel_rng: FWH not detected
  367. [ 0.596554] Linux agpgart interface v0.103
  368. [ 0.596715] agpgart-intel 0000:00:00.0: Intel i845 Chipset
  369. [ 0.601273] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
  370. [ 0.601965] radeonfb: Found Intel x86 BIOS ROM Image
  371. [ 0.602115] radeonfb: Retrieved PLL infos from BIOS
  372. [ 0.602197] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
  373. [ 0.602311] radeonfb: PLL min 20000 max 40000
  374. [ 0.676182] i2c i2c-1: unable to read EDID block.
  375. [ 0.793162] i2c i2c-1: unable to read EDID block.
  376. [ 0.910160] i2c i2c-1: unable to read EDID block.
  377. [ 1.027161] i2c i2c-3: unable to read EDID block.
  378. [ 1.144160] i2c i2c-3: unable to read EDID block.
  379. [ 1.261160] i2c i2c-3: unable to read EDID block.
  380. [ 1.449030] radeonfb: Monitor 1 type CRT found
  381. [ 1.449111] radeonfb: EDID probed
  382. [ 1.449186] radeonfb: Monitor 2 type no found
  383. [ 1.449558] fbcon: ATI Radeon 4966 (fb0) is primary device
  384. [ 1.472076] Console: switching to colour frame buffer device 80x30
  385. [ 1.486055] radeonfb (0000:01:00.0): ATI Radeon 4966 "If"
  386. [ 1.488268] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  387. [ 1.492218] ACPI: Power Button [PWRB]
  388. [ 1.494469] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
  389. [ 1.498370] ACPI: Sleep Button [SLPB]
  390. [ 1.500576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  391. [ 1.504633] ACPI: Power Button [PWRF]
  392. [ 1.508613] thermal LNXTHERM:00: registered as thermal_zone0
  393. [ 1.510697] ACPI: Thermal Zone [THRM] (40 C)
  394. [ 1.512980] [drm] Initialized drm 1.1.0 20060810
  395. [ 1.515174] [drm] radeon kernel modesetting enabled.
  396. [ 1.520553] loop: module loaded
  397. [ 1.523484] ata_piix 0000:00:1f.1: version 2.13
  398. [ 1.526608] scsi host0: ata_piix
  399. [ 1.529298] scsi host1: ata_piix
  400. [ 1.531559] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
  401. [ 1.533794] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
  402. [ 1.536682] 8139too: 8139too Fast Ethernet driver 0.9.28
  403. [ 1.540162] 8139too 0000:02:06.0 eth0: RealTek RTL8139 at 0xf080a000, 00:e0:4c:ec:a0:c6, IRQ 18
  404. [ 1.545091] PPP generic driver version 2.4.2
  405. [ 1.547620] NET: Registered protocol family 24
  406. [ 1.550404] uhci_hcd: USB Universal Host Controller Interface driver
  407. [ 1.552981] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  408. [ 1.555758] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
  409. [ 1.560638] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
  410. [ 1.563451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  411. [ 1.565826] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  412. [ 1.570393] usb usb1: Product: UHCI Host Controller
  413. [ 1.572736] usb usb1: Manufacturer: Linux 3.18.12-gentoo uhci_hcd
  414. [ 1.575079] usb usb1: SerialNumber: 0000:00:1d.0
  415. [ 1.578332] hub 1-0:1.0: USB hub found
  416. [ 1.580848] hub 1-0:1.0: 2 ports detected
  417. [ 1.583950] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  418. [ 1.586366] tsc: Refined TSC clocksource calibration: 1697.102 MHz
  419. [ 1.589174] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
  420. [ 1.594392] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
  421. [ 1.597356] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  422. [ 1.599982] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  423. [ 1.604953] usb usb2: Product: UHCI Host Controller
  424. [ 1.607484] usb usb2: Manufacturer: Linux 3.18.12-gentoo uhci_hcd
  425. [ 1.610024] usb usb2: SerialNumber: 0000:00:1d.1
  426. [ 1.613440] hub 2-0:1.0: USB hub found
  427. [ 1.616278] hub 2-0:1.0: 2 ports detected
  428. [ 1.619635] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  429. [ 1.622696] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
  430. [ 1.627879] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
  431. [ 1.630718] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  432. [ 1.633328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  433. [ 1.638168] usb usb3: Product: UHCI Host Controller
  434. [ 1.640679] usb usb3: Manufacturer: Linux 3.18.12-gentoo uhci_hcd
  435. [ 1.643186] usb usb3: SerialNumber: 0000:00:1d.2
  436. [ 1.646402] hub 3-0:1.0: USB hub found
  437. [ 1.649242] hub 3-0:1.0: 2 ports detected
  438. [ 1.652443] usbcore: registered new interface driver usblp
  439. [ 1.655327] usbcore: registered new interface driver usb-storage
  440. [ 1.658256] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  441. [ 1.666693] serio: i8042 KBD port at 0x60,0x64 irq 1
  442. [ 1.669307] serio: i8042 AUX port at 0x60,0x64 irq 12
  443. [ 1.672237] mousedev: PS/2 mouse device common for all mice
  444. [ 1.675695] rtc_cmos 00:03: RTC can wake from S4
  445. [ 1.678586] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  446. [ 1.681204] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram
  447. [ 1.683896] i2c /dev entries driver
  448. [ 1.687827] intel_powerclamp: Intel powerclamp does not run on family 15 model 1
  449. [ 1.693150] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8161B, 0100, max UDMA/33
  450. [ 1.696886] hidraw: raw HID events driver (C) Jiri Kosina
  451. [ 1.700352] usbcore: registered new interface driver usbhid
  452. [ 1.702888] usbhid: USB HID core driver
  453. [ 1.708734] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  454. [ 1.734227] ata2.01: configured for UDMA/33
  455. [ 1.741636] ata1.00: HPA detected: current 234439535, native 234441648
  456. [ 1.744157] ata1.00: ATA-6: ST3120026A, 8.54, max UDMA/100
  457. [ 1.746605] ata1.00: 234439535 sectors, multi 16: LBA48
  458. [ 1.771414] ata1.00: configured for UDMA/100
  459. [ 1.774208] scsi 0:0:0:0: Direct-Access ATA ST3120026A 8.54 PQ: 0 ANSI: 5
  460. [ 1.780186] sd 0:0:0:0: Attached scsi generic sg0 type 0
  461. [ 1.783287] sd 0:0:0:0: [sda] 234439535 512-byte logical blocks: (120 GB/111 GiB)
  462. [ 1.789709] sd 0:0:0:0: [sda] Write Protect is off
  463. [ 1.792494] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  464. [ 1.793092] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  465. [ 1.803279] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8161B 0100 PQ: 0 ANSI: 5
  466. [ 1.840115] sr 1:0:1:0: [sr0] scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
  467. [ 1.846054] cdrom: Uniform CD-ROM driver Revision: 3.20
  468. [ 1.851277] sr 1:0:1:0: Attached scsi CD-ROM sr0
  469. [ 1.853480] sr 1:0:1:0: Attached scsi generic sg1 type 5
  470. [ 1.857076] sda: sda1 sda2 sda3 sda4 sda5
  471. [ 1.861779] sd 0:0:0:0: [sda] Attached SCSI disk
  472. [ 1.885074] usb 1-2: new full-speed USB device number 2 using uhci_hcd
  473. [ 1.890919] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input5
  474. [ 2.019049] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 50325 usecs (2426 samples)
  475. [ 2.024900] snd_intel8x0 0000:00:1f.5: clocking to 48000
  476. [ 2.034210] snd_emu10k1 0000:02:08.0: Audigy2 value: Special config.
  477. [ 2.059097] Netfilter messages via NETLINK v0.30.
  478. [ 2.062375] nf_conntrack version 0.5.0 (12020 buckets, 48080 max)
  479. [ 2.066229] ctnetlink v0.93: registering with nfnetlink.
  480. [ 2.069989] ip_tables: (C) 2000-2006 Netfilter Core Team
  481. [ 2.073355] TCP: cubic registered
  482. [ 2.076231] Initializing XFRM netlink socket
  483. [ 2.079806] NET: Registered protocol family 10
  484. [ 2.083759] ip6_tables: (C) 2000-2006 Netfilter Core Team
  485. [ 2.086919] sit: IPv6 over IPv4 tunneling driver
  486. [ 2.090342] NET: Registered protocol family 17
  487. [ 2.093623] Using IPI No-Shortcut mode
  488. [ 2.096784] registered taskstats version 1
  489. [ 2.100867] Btrfs loaded
  490. [ 2.103843] Magic number: 3:853:832
  491. [ 2.106308] console [netcon0] enabled
  492. [ 2.108465] netconsole: network logging started
  493. [ 2.110668] rtc_cmos 00:03: setting system clock to 2015-06-12 11:48:03 UTC (1434109683)
  494. [ 2.115425] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
  495. [ 2.117884] PM: Hibernation image not present or could not be loaded.
  496. [ 2.117889] ALSA device list:
  497. [ 2.120144] #0: Intel 82801DB-ICH4 with ALC650D at irq 17
  498. [ 2.122412] #1: SB Audigy 4 [SB0610] (rev.0, serial:0x10211102) at 0xa400, irq 20
  499. [ 2.128273] Freeing unused kernel memory: 532K (c1822000 - c18a7000)
  500. [ 2.131182] Write protecting the kernel text: 6504k
  501. [ 2.133693] Write protecting the kernel read-only data: 1376k
  502. [ 2.349106] dracut: dracut-041-r3
  503. [ 2.357284] usb 1-2: New USB device found, idVendor=177f, idProduct=0603
  504. [ 2.359783] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  505. [ 2.362192] usb 1-2: Product: WC003V6 Sweex Webcam USB
  506. [ 2.364573] usb 1-2: Manufacturer: Etron Technology, Inc.
  507. [ 2.590551] Switched to clocksource tsc
  508. [ 2.783439] systemd-udevd[991]: starting version 216
  509. [ 2.789805] random: systemd-udevd urandom read with 24 bits of entropy available
  510. [ 3.057896] 8139too 0000:02:06.0 enp2s6: renamed from eth0
  511. [ 3.082498] systemd-udevd[997]: renamed network interface eth0 to enp2s6
  512. [ 3.432831] BTRFS: device fsid 42de63ad-f75b-4869-a27a-9b7debc14a14 devid 1 transid 3592 /dev/sda4
  513. [ 3.542077] random: nonblocking pool is initialized
  514. [ 3.568992] BTRFS: device fsid 42de63ad-f75b-4869-a27a-9b7debc14a14 devid 2 transid 3592 /dev/sda5
  515. [ 3.646089] PM: Starting manual resume from disk
  516. [ 3.649295] PM: Hibernation image partition 8:3 present
  517. [ 3.649301] PM: Looking for hibernation image.
  518. [ 3.649804] PM: Image not found (code -22)
  519. [ 3.649811] PM: Hibernation image not present or could not be loaded.
  520. [ 3.708202] BTRFS info (device sda5): disk space caching is enabled
  521. [ 4.057941] dracut: Mounted root filesystem /dev/sda4
  522. [ 4.291323] dracut: Switching root
  523. [ 7.448454] systemd-udevd[1780]: starting version 216
  524. [ 9.734925] BTRFS info (device sda5): disk space caching is enabled
  525. [ 10.049564] Adding 914428k swap on /dev/sda3. Priority:-1 extents:1 across:914428k
  526. [ 10.139116] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
  527. [ 10.141134] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
  528. [ 13.312861] 8139too 0000:02:06.0 enp2s6: link up, 100Mbps, full-duplex, lpa 0x45E1
  529. [19231.042036] usb 2-1: new full-speed USB device number 2 using uhci_hcd
  530. [19231.202986] usb 2-1: New USB device found, idVendor=13fe, idProduct=3e00
  531. [19231.202997] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  532. [19231.203022] usb 2-1: Product: USB DISK 2.0
  533. [19231.203028] usb 2-1: Manufacturer:
  534. [19231.203033] usb 2-1: SerialNumber: 07BB0402D4750598
  535. [19231.206156] usb-storage 2-1:1.0: USB Mass Storage device detected
  536. [19231.206353] scsi host2: usb-storage 2-1:1.0
  537. [19232.241878] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
  538. [19232.244060] sd 2:0:0:0: Attached scsi generic sg2 type 0
  539. [19232.698782] sd 2:0:0:0: [sdb] 7814304 512-byte logical blocks: (4.00 GB/3.72 GiB)
  540. [19232.701792] sd 2:0:0:0: [sdb] Write Protect is off
  541. [19232.701806] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
  542. [19232.704790] sd 2:0:0:0: [sdb] No Caching mode page found
  543. [19232.704803] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  544. [19232.760812] sdb: sdb1
  545. [19232.776769] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  546. [19276.267504] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
RAW Paste Data