Advertisement
Guest User

Untitled

a guest
Aug 12th, 2014
207
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot SPL 2014.01-09730-gb5bd4c9 (Mar 08 2014 - 00:03:52)
  2. Board: Mele_A1000
  3. DRAM: 512 MiB
  4. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  5. spl: not an uImage at 1600
  6.  
  7.  
  8. U-Boot 2014.01-09730-gb5bd4c9 (Mar 08 2014 - 00:03:52) Allwinner Technology
  9.  
  10. CPU: Allwinner A10 (SUN4I)
  11. Board: Mele_A1000
  12. I2C: ready
  13. DRAM: 512 MiB
  14. MMC: SUNXI SD/MMC: 0
  15. *** Warning - bad CRC, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Net: emac
  21. Hit any key to stop autoboot: 0
  22. reading uEnv.txt
  23. ** Unable to read file uEnv.txt **
  24. Failed to mount ext2 filesystem...
  25. ** Unrecognized filesystem type **
  26. Failed to mount ext2 filesystem...
  27. ** Unrecognized filesystem type **
  28. reading boot.scr
  29. 294 bytes read in 3 ms (95.7 KiB/s)
  30. Jumping to boot.scr
  31. ## Executing script at 44000000
  32. reading sun4i-a10-a1000.dtb
  33. 17175 bytes read in 17 ms (986.3 KiB/s)
  34. reading uImage
  35. 4244864 bytes read in 203 ms (19.9 MiB/s)
  36. ## Booting kernel from Legacy Image at 46000000 ...
  37. Image Name: Linux-3.16.0
  38. Created: 2014-08-12 18:43:27 UTC
  39. Image Type: ARM Linux Kernel Image (uncompressed)
  40. Data Size: 4244800 Bytes = 4 MiB
  41. Load Address: 40008000
  42. Entry Point: 40008000
  43. Verifying Checksum ... OK
  44. ## Flattened Device Tree blob at 49000000
  45. Booting using the fdt blob at 0x49000000
  46. Loading Kernel Image ... OK
  47. Using Device Tree in place at 49000000, end 49007316
  48.  
  49. Starting kernel ...
  50.  
  51. [ 0.000000] Booting Linux on physical CPU 0x0
  52. [ 0.000000] Linux version 3.16.0 (matthew@darjeeling) (gcc version 4.8.1 (Fedora 2013.11.24-2.fc20) ) #1 Tue Aug 12 13:37:26 CDT 2014
  53. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
  54. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  55. [ 0.000000] Machine model: Mele A1000
  56. [ 0.000000] Memory policy: Data cache writeback
  57. [ 0.000000] On node 0 totalpages: 131072
  58. [ 0.000000] free_area_init_node: node 0, pgdat c06a42a4, node_mem_map dfbfa000
  59. [ 0.000000] Normal zone: 1024 pages used for memmap
  60. [ 0.000000] Normal zone: 0 pages reserved
  61. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  62. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  63. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  64. [ 0.000000] pcpu-alloc: [0] 0
  65. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  66. [ 0.000000] Kernel command line: console=ttyS0,115200 loglevel=9 earlyprintk rootwait root=/dev/mmcblk0p2
  67. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  68. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  69. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  70. [ 0.000000] Memory: 512616K/524288K available (4457K kernel code, 267K rwdata, 1888K rodata, 155K init, 256K bss, 11672K reserved, 0K highmem)
  71. [ 0.000000] Virtual kernel memory layout:
  72. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  73. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  74. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  75. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  76. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  77. [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
  78. [ 0.000000] .text : 0xc0008000 - 0xc063a6e8 (6346 kB)
  79. [ 0.000000] .init : 0xc063b000 - 0xc0661c54 ( 156 kB)
  80. [ 0.000000] .data : 0xc0662000 - 0xc06a4e00 ( 268 kB)
  81. [ 0.000000] .bss : 0xc06a4e00 - 0xc06e5060 ( 257 kB)
  82. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  83. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  84. [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
  85. [ 0.000223] Console: colour dummy device 80x30
  86. [ 0.000241] Calibrating delay loop... 1007.61 BogoMIPS (lpj=5038080)
  87. [ 0.090124] pid_max: default: 32768 minimum: 301
  88. [ 0.090209] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  89. [ 0.090217] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  90. [ 0.090613] CPU: Testing write buffer coherency: ok
  91. [ 0.090838] Setting up static identity map for 0x404313b8 - 0x40431404
  92. [ 0.091618] devtmpfs: initialized
  93. [ 0.092212] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  94. [ 0.092459] xor: measuring software checksum speed
  95. [ 0.190068] arm4regs : 1256.800 MB/sec
  96. [ 0.290066] 8regs : 1084.000 MB/sec
  97. [ 0.390067] 32regs : 898.000 MB/sec
  98. [ 0.490064] neon : 1832.400 MB/sec
  99. [ 0.490070] xor: using function: neon (1832.400 MB/sec)
  100. [ 0.490165] pinctrl core: initialized pinctrl subsystem
  101. [ 0.490422] regulator-dummy: no parameters
  102. [ 0.493949] NET: Registered protocol family 16
  103. [ 0.494471] DMA: preallocated 256 KiB pool for atomic coherent allocations
  104. [ 0.494993] cpuidle: using governor ladder
  105. [ 0.495006] cpuidle: using governor menu
  106. [ 0.497551] hw-breakpoint: debug architecture 0x4 unsupported.
  107. [ 0.670351] raid6: int32x1 215 MB/s
  108. [ 0.840085] raid6: int32x2 337 MB/s
  109. [ 1.010161] raid6: int32x4 342 MB/s
  110. [ 1.180192] raid6: int32x8 329 MB/s
  111. [ 1.350103] raid6: neonx1 1425 MB/s
  112. [ 1.520085] raid6: neonx2 1842 MB/s
  113. [ 1.690076] raid6: neonx4 1919 MB/s
  114. [ 1.860130] raid6: neonx8 708 MB/s
  115. [ 1.860135] raid6: using algorithm neonx4 (1919 MB/s)
  116. [ 1.860143] raid6: using intx1 recovery algorithm
  117. [ 1.860334] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  118. [ 1.860354] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
  119. [ 1.860375] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
  120. [ 1.860386] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
  121. [ 1.860540] vcc3v0: 3000 mV
  122. [ 1.860722] vcc3v3: 3300 mV
  123. [ 1.860784] reg-fixed-voltage emac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/emac_power_pin@0, deferring probe
  124. [ 1.860796] platform emac-3v3: Driver reg-fixed-voltage requests probe deferral
  125. [ 1.861190] SCSI subsystem initialized
  126. [ 1.861342] libata version 3.00 loaded.
  127. [ 1.861621] usbcore: registered new interface driver usbfs
  128. [ 1.861681] usbcore: registered new interface driver hub
  129. [ 1.861767] usbcore: registered new device driver usb
  130. [ 1.861895] pps_core: LinuxPPS API ver. 1 registered
  131. [ 1.861901] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  132. [ 1.861923] PTP clock support registered
  133. [ 1.862185] Advanced Linux Sound Architecture Driver Initialized.
  134. [ 1.863166] Switched to clocksource timer
  135. [ 1.863434] FS-Cache: Loaded
  136. [ 1.866897] cfg80211: Calling CRDA to update world regulatory domain
  137. [ 1.870677] NET: Registered protocol family 2
  138. [ 1.871239] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  139. [ 1.871286] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  140. [ 1.871321] TCP: Hash tables configured (established 4096 bind 4096)
  141. [ 1.871375] TCP: reno registered
  142. [ 1.871383] UDP hash table entries: 256 (order: 0, 4096 bytes)
  143. [ 1.871397] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  144. [ 1.871510] NET: Registered protocol family 1
  145. [ 1.871735] RPC: Registered named UNIX socket transport module.
  146. [ 1.871743] RPC: Registered udp transport module.
  147. [ 1.871748] RPC: Registered tcp transport module.
  148. [ 1.871752] RPC: Registered tcp NFSv4.1 backchannel transport module.
  149. [ 1.872826] futex hash table entries: 256 (order: -1, 3072 bytes)
  150. [ 1.882550] NFS: Registering the id_resolver key type
  151. [ 1.882597] Key type id_resolver registered
  152. [ 1.882603] Key type id_legacy registered
  153. [ 1.882620] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  154. [ 1.882630] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  155. [ 1.883636] ntfs: driver 2.1.30 [Flags: R/O].
  156. [ 1.883930] fuse init (API version 7.23)
  157. [ 1.884640] msgmni has been set to 1001
  158. [ 1.885784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  159. [ 1.885799] io scheduler noop registered
  160. [ 1.885808] io scheduler deadline registered
  161. [ 1.885838] io scheduler cfq registered (default)
  162. [ 1.886022] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
  163. [ 1.887421] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  164. [ 1.931606] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  165. [ 1.933942] console [ttyS0] disabled
  166. [ 1.954093] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 27, base_baud = 1500000) is a U6_16550A
  167. [ 2.601332] console [ttyS0] enabled
  168. [ 2.608311] loop: module loaded
  169. [ 2.673212] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
  170. [ 2.680691] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
  171. [ 2.686576] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  172. [ 2.695542] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
  173. [ 2.704350] scsi0 : ahci_platform
  174. [ 2.707955] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 21
  175. [ 2.716791] platform 1c0b080.mdio: Driver sun4i-mdio requests probe deferral
  176. [ 2.724205] sun4i-emac 1c0b000.ethernet: using random MAC address 6e:8c:ed:52:b8:83
  177. [ 2.733779] sun4i-emac 1c0b000.ethernet: eth0: at e08be000, IRQ 17 MAC: 6e:8c:ed:52:b8:83
  178. [ 2.742053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  179. [ 2.748601] ehci-platform: EHCI generic platform driver
  180. [ 2.753921] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  181. [ 2.761177] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  182. [ 2.768456] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  183. [ 2.774659] ohci-platform: OHCI generic platform driver
  184. [ 2.779945] platform 1c14400.usb: Driver ohci-platform requests probe deferral
  185. [ 2.787213] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
  186. [ 2.794548] usbcore: registered new interface driver cdc_acm
  187. [ 2.800198] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  188. [ 2.808274] usbcore: registered new interface driver usblp
  189. [ 2.813827] usbcore: registered new interface driver usb-storage
  190. [ 2.820205] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
  191. [ 2.827010] sunxi-rtc 1c20d00.rtc: RTC enabled
  192. [ 2.831496] i2c /dev entries driver
  193. [ 2.835859] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  194. [ 2.844128] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
  195. [ 2.849995] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
  196. [ 2.893197] sunxi-mmc 1c0f000.mmc: base:0xe08c6000 irq:18
  197. [ 2.899728] usbcore: registered new interface driver usbhid
  198. [ 2.905321] usbhid: USB HID core driver
  199. [ 2.910313] specify port
  200. [ 2.913990] snd_mpu401: probe of snd_mpu401.0 failed with error -22
  201. [ 2.922648] usbcore: registered new interface driver snd-usb-audio
  202. [ 2.928891] Netfilter messages via NETLINK v0.30.
  203. [ 2.933621] nf_conntrack version 0.5.0 (8009 buckets, 32036 max)
  204. [ 2.940083] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
  205. [ 2.946654] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
  206. [ 2.955232] ip_tables: (C) 2000-2006 Netfilter Core Team
  207. [ 2.962711] arp_tables: (C) 2002 David S. Miller
  208. [ 2.967427] TCP: cubic registered
  209. [ 2.970752] Initializing XFRM netlink socket
  210. [ 2.975064] NET: Registered protocol family 17
  211. [ 2.979585] Bridge firewalling registered
  212. [ 2.983665] 8021q: 802.1Q VLAN Support v1.8
  213. [ 2.987878] Key type dns_resolver registered
  214. [ 2.992262] ThumbEE CPU extension supported.
  215. [ 2.996576] Registering SWP/SWPB emulation handler
  216. [ 3.003841] Btrfs loaded
  217. [ 3.006923] usb1-vbus: 5000 mV
  218. [ 3.010380] usb2-vbus: 5000 mV
  219. [ 3.013830] emac-3v3: 3300 mV
  220. [ 3.016898] mmc0: host does not support reading read-only switch. assuming write-enable.
  221. [ 3.025634] libphy: sun4i_mii_bus: probed
  222. [ 3.033635] mmc0: new high speed SDHC card at address e624
  223. [ 3.039394] mmcblk0: mmc0:e624 SU16G 14.8 GiB
  224. [ 3.046028] mmcblk0: p1 p2
  225. [ 3.063217] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  226. [ 3.069638] ehci-platform 1c14000.usb: EHCI Host Controller
  227. [ 3.075244] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  228. [ 3.083094] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
  229. [ 3.089976] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  230. [ 3.096843] ehci-platform 1c14000.usb: irq 19, io mem 0x01c14000
  231. [ 3.109080] ata1.00: configured for UDMA/133
  232. [ 3.113384] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  233. [ 3.119760] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
  234. [ 3.128500] hub 1-0:1.0: USB hub found
  235. [ 3.132890] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  236. [ 3.140563] sd 0:0:0:0: [sda] 4096-byte physical blocks
  237. [ 3.145996] sd 0:0:0:0: Attached scsi generic sg0 type 0
  238. [ 3.151380] hub 1-0:1.0: 1 port detected
  239. [ 3.155876] ehci-platform 1c1c000.usb: EHCI Host Controller
  240. [ 3.161467] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  241. [ 3.169396] sd 0:0:0:0: [sda] Write Protect is off
  242. [ 3.174201] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  243. [ 3.179338] ehci-platform 1c1c000.usb: irq 22, io mem 0x01c1c000
  244. [ 3.185425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  245. [ 3.213206] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  246. [ 3.219409] sda: sda1 sda2
  247. [ 3.223436] hub 2-0:1.0: USB hub found
  248. [ 3.227466] sd 0:0:0:0: [sda] Attached SCSI disk
  249. [ 3.232090] hub 2-0:1.0: 1 port detected
  250. [ 3.236495] ohci-platform 1c14400.usb: Generic Platform OHCI controller
  251. [ 3.243127] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
  252. [ 3.250950] ohci-platform 1c14400.usb: irq 20, io mem 0x01c14400
  253. [ 3.317765] hub 3-0:1.0: USB hub found
  254. [ 3.321532] hub 3-0:1.0: 1 port detected
  255. [ 3.325879] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
  256. [ 3.332501] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
  257. [ 3.340354] ohci-platform 1c1c400.usb: irq 23, io mem 0x01c1c400
  258. [ 3.407743] hub 4-0:1.0: USB hub found
  259. [ 3.411506] hub 4-0:1.0: 1 port detected
  260. [ 3.415834] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 18:15:44 UTC (1262369744)
  261. [ 3.427204] vcc3v0: disabling
  262. [ 3.430269] ALSA device list:
  263. [ 3.433280] No soundcards found.
  264. [ 3.437981] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  265. [ 3.447908] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
  266. [ 3.459047] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  267. [ 3.466360] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  268. [ 3.473539] usb 1-1: new high-speed USB device number 2 using ehci-platform
  269. [ 3.625400] hub 1-1:1.0: USB hub found
  270. [ 3.629490] hub 1-1:1.0: 4 ports detected
  271. [ 3.753193] usb 2-1: new high-speed USB device number 2 using ehci-platform
  272. [ 3.983496] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
  273. [ 4.002628] EXT4-fs (mmcblk0p2): recovery complete
  274. [ 4.013147] random: nonblocking pool is initialized
  275. [ 4.020226] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  276. [ 4.028358] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  277. [ 4.041248] devtmpfs: mounted
  278. [ 4.044408] Freeing unused kernel memory: 152K (c063b000 - c0661000)
  279. [ 4.094279] hub 1-1.1:1.0: USB hub found
  280. [ 4.098625] hub 1-1.1:1.0: 4 ports detected
  281. [ 4.183518] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
  282. Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
  283. INIT: version 2.88 booting
  284. [ 4.315476] input: Schiit Schiit USB Audio Device as /devices/soc@01c00000/1c14000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:0D8C:1319.0001/input/input0
  285. [ 4.329200] hid-generic 0003:0D8C:1319.0001: input: USB HID v1.00 Device [Schiit Schiit USB Audio Device] on usb-1c14000.usb-1.2/input2
  286. [ 4.423399] usb 1-1.1.1: new high-speed USB device number 5 using ehci-platform
  287. [info] Using makefile-style concurrent boot in runlevel S.
  288. [ 4.554426] hub 1-1.1.1:1.0: USB hub found
  289. [ 4.563702] hub 1-1.1.1:1.0: 4 ports detected
  290. [ 4.653409] usb 1-1.1.3: new high-speed USB device number 6 using ehci-platform
  291. [ 4.776059] usb-storage 1-1.1.3:1.0: USB Mass Storage device detected
  292. [ 4.792596] scsi1 : usb-storage 1-1.1.3:1.0
  293. [ 4.893400] usb 1-1.1.4: new high-speed USB device number 7 using ehci-platform
  294. [....] Starting the hotplug events dispatcher: udevd[ 4.943257] systemd-udevd[167]: starting version 208
  295. . ok
  296. [ 5.024683] hub 1-1.1.4:1.0: USB hub found
  297. [ 5.031607] hub 1-1.1.4:1.0: 4 ports detected
  298. [ ok ] Synthesizing the initial hotplug events...done.
  299. [....] Waiting for /dev to be fully populated...[ 5.685876] rtl8192cu: Chip version 0x10
  300. [ 5.794736] scsi 1:0:0:0: Direct-Access Seagate Backup+ BL 0836 PQ: 0 ANSI: 6
  301. [ 5.834804] sd 1:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
  302. [ 5.845340] sd 1:0:0:0: Attached scsi generic sg1 type 0
  303. [ 5.876300] sd 1:0:0:0: [sdb] Write Protect is off
  304. [ 5.881218] sd 1:0:0:0: [sdb] Mode Sense: 2b 00 10 08
  305. [ 5.911158] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  306. [ 5.924765] rtl8192cu: MAC address: 00:a8:54:83:89:1b
  307. [ 5.929843] rtl8192cu: Board Type 0
  308. [ 5.958254] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
  309. [ 5.972342] sdb: sdb1
  310. [ 5.984031] sd 1:0:0:0: [sdb] Attached SCSI disk
  311. [ 5.992684] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
  312. [ 6.021977] usbcore: registered new interface driver rtl8192cu
  313. [ 6.030715] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
  314. [ 6.057975] rtlwifi: wireless switch is on
  315. done.
  316. [....] Activating swap...[ 7.699463] Adding 1175252k swap on /dev/sda2. Priority:-1 extents:1 across:1175252k
  317. done.
  318. [ 7.780021] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  319. [....] Checking root file system...fsck from util-linux 2.20.1
  320. /dev/mmcblk0p2: clean, 56116/972944 files, 663839/3885568 blocks
  321. done.
  322. [ 7.914170] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  323. [ ok ] Activating lvm and md swap...done.
  324. [....] Checking file systems...fsck from util-linux 2.20.1
  325. /dev/sdb1: recovering journal
  326. /dev/sda1: recovering journal
  327. /dev/sdb1: clean, 115546/61054976 files, 177528457/244190638 blocks
  328. /dev/sda1: clean, 157589/60981248 files, 194414086/243896576 blocks
  329. done.
  330. [ ok ] Cleaning up temporary files... /tmp.
  331. [info] Loading kernel module lp.
  332. modprobe: FATAL: Module lp not found.
  333. [info] Loading kernel module ppdev.
  334. modprobe: FATAL: Module ppdev not found.
  335. [info] Loading kernel module parport_pc.
  336. modprobe: FATAL: Module parport_pc not found.
  337. [ 10.589072] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  338. [ 10.693049] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  339. [ ok ] Mounting local filesystems...done.
  340. [ ok ] Activating swapfile swap...done.
  341. [ ok ] Cleaning up temporary files....
  342. [ ok ] Setting kernel variables ...done.
  343. [ 11.749486] sun4i-emac 1c0b000.ethernet eth0: could not find the PHY
  344. [ 11.755896] sun4i-emac 1c0b000.ethernet eth0: cannot probe MDIO bus
  345. [ 11.806368] rtl8192cu: MAC auto ON okay!
  346. [ 11.842917] rtl8192cu: Tx queue select: 0x05
  347. [....] Configuring network interfaces...RTNETLINK answers: No such device
  348. Failed to bring up eth0.
  349. done.
  350. rpcbind: cannot create socket for udp6
  351. rpcbind: cannot create socket for tcp6
  352. [ ok ] Starting rpcbind daemon....
  353. [ ok ] Starting NFS common utilities: statd idmapd.
  354. [ ok ] Cleaning up temporary files....
  355. [ ok ] Setting up ALSA...done.
  356. [ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
  357. INIT: Entering runlevel: 2
  358. [info] Using makefile-style concurrent boot in runlevel 2.
  359. minissdpd[1300]: setsockopt(udp, IP_ADD_MEMBERSHIP)(0.0.0.0): No such device
  360. minissdpd[1300]: Failed to add IPv4 multicast membership for interface 0.0.0.0.
  361. [ 13.703388] rtl8192cu: MAC auto ON okay!
  362. [ 13.749435] rtl8192cu: Tx queue select: 0x05
  363. [ ok ] Starting UPnP devices daemon: MiniSSDPd.
  364. [ 14.303221] cfg80211: Calling CRDA to update world regulatory domain
  365. [ 14.345674] cfg80211: World regulatory domain updated:
  366. [ 14.350932] cfg80211: DFS Master region: unset
  367. [ 14.355314] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  368. [ 14.365063] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  369. [ 14.373055] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  370. [ 14.381092] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  371. [ 14.389110] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  372. [ 14.397116] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  373. [ 14.405118] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  374. [ 14.449005] cfg80211: Calling CRDA for country: US
  375. [ 14.502507] cfg80211: Regulatory domain changed to country: US
  376. [ 14.508392] cfg80211: DFS Master region: unset
  377. [ 14.512742] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  378. [ 14.522495] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  379. [ 14.530502] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
  380. [ 14.538504] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
  381. [ 14.546504] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  382. [ 14.554503] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  383. [ ok ] Starting advanced IEEE 802.11 management: hostapd.
  384. [ ok ] Starting NFS common utilities: statd idmapd.
  385. [ ok ] Starting NetBIOS name server: nmbd.
  386. [info] Already running: rcpbind.
  387. [ ok ] Starting enhanced syslogd: rsyslogd.
  388. [ ok ] Starting Common Unix Printing System: cupsd.
  389. [ ok ] Starting system message bus: dbus.
  390. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
  391. [ ok ] Starting DNS forwarder and DHCP server: dnsmasq.
  392. [ ok ] Starting periodic command scheduler: cron.
  393. [ ok ] Starting CUPS Bonjour daemon: cups-browsed.
  394. [ ok ] Starting Music Player Daemon: mpd.
  395. [ 22.647188] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  396. [ 22.656855] NFSD: starting 90-second grace period (net c069e5a8)
  397. [ ok ] Exporting directories for NFS kernel daemon....
  398. [....] Starting NFS kernel daemon: nfsdrpc.nfsd: address family inet6 not supported by protocol TCP
  399. mountdrpc.mountd: svc_tli_create: could not open connection for udp6
  400. rpc.mountd: svc_tli_create: could not open connection for tcp6
  401. rpc.mountd: svc_tli_create: could not open connection for udp6
  402. rpc.mountd: svc_tli_create: could not open connection for tcp6
  403. rpc.mountd: svc_tli_create: could not open connection for udp6
  404. rpc.mountd: svc_tli_create: could not open connection for tcp6
  405. . ok
  406. saned disabled; edit /etc/default/saned
  407. [ ok ] Starting SMB/CIFS daemon: smbd.
  408. [ ok ] Starting OpenBSD Secure Shell server: sshd.
  409. [ ok ] Starting bittorrent daemon: transmission-daemon.
  410. [ ok ] Starting upnp media server: mediatomb.
  411.  
  412. Debian GNU/Linux jessie/sid earlgrey ttyS0
  413.  
  414. earlgrey login:
Advertisement
Advertisement
Advertisement
RAW Paste Data Copied
Advertisement