Advertisement
Guest User

Untitled

a guest
Feb 10th, 2022
60
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 41.05 KB | None | 0 0
  1. U-Boot 2012.07.7-r038300217.1 (Sep 29 2015 - 11:41:04) (back-up)
  2.  
  3. smem ram ptable found: ver: 0 len: 5
  4. DRAM: 1004 MiB
  5. NAND: SF: Detected S25FL256S with page size 64 KiB, total 32 MiB
  6. ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x2000000
  7. 544 MiB
  8. In: serial
  9. Out: serial
  10. Err: serial
  11. Net: MAC0 addr:dc:ff:ff:eb:04:30
  12. MAC2 addr:00:20:82:e1:02:00
  13. eth0
  14. Warning: eth0 MAC addresses don't match:
  15. Address in SROM is dc:ff:ff:eb:04:30
  16. Address in environment is d8:84:66:4f:98:ba
  17. , eth1
  18. Warning: eth1 MAC addresses don't match:
  19. Address in SROM is 00:20:82:e1:02:00
  20. Address in environment is d8:84:66:4f:98:bb
  21.  
  22. Hit 'd' for diagnostics, or any other key to stop autoboot: 1  0
  23.  
  24. *** Loading, please wait ***
  25.  
  26. Creating 1 MTD partitions on "nand0":
  27. 0x000000000000-0x000020000000 : "mtd=0"
  28. UBI: attaching mtd2 to ubi0
  29. UBI: physical eraseblock size: 131072 bytes (128 KiB)
  30. UBI: logical eraseblock size: 126976 bytes
  31. UBI: smallest flash I/O unit: 2048
  32. UBI: VID header offset: 2048 (aligned 2048)
  33. UBI: data offset: 4096
  34. UBI: attached mtd2 to ubi0
  35. UBI: MTD device name: "mtd=0"
  36. UBI: MTD device size: 512 MiB
  37. UBI: number of good PEBs: 4096
  38. UBI: number of bad PEBs: 0
  39. UBI: max. allowed volumes: 128
  40. UBI: wear-leveling threshold: 4096
  41. UBI: number of internal volumes: 1
  42. UBI: number of user volumes: 1
  43. UBI: available PEBs: 0
  44. UBI: total number of reserved PEBs: 4096
  45. UBI: number of PEBs reserved for bad PEB handling: 40
  46. UBI: max/mean erase counter: 22/4
  47.  
  48. UBIFS: mounted UBI device 0, volume 0, name "nand_flash"
  49. UBIFS: mounted read-only
  50. UBIFS: file system size: 513110016 bytes (501084 KiB, 489 MiB, 4041 LEBs)
  51. UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
  52. UBIFS: media format: w4/r0 (latest is w4/r0)
  53. UBIFS: default compressor: zlib
  54. UBIFS: reserved for root: 0 bytes (0 KiB)
  55.  
  56. Loading file '/home/config/shadow' to addr 0x77ef7288 with size 57 (0x00000039)...
  57. Done
  58.  
  59. [30s timeout]
  60. login: admin
  61. password: new2day
  62.  
  63. [30s timeout]
  64. login: admin
  65. password: new2day
  66.  
  67. Boot (BAK)->
  68. Boot (BAK)->
  69. Boot (BAK)->
  70. Boot (BAK)-> printenv
  71. AC_HOSTNAME=Controller
  72. AKRON_P1_NAND_REFORMAT_CNT=3
  73. AP_FLAG=128
  74. AP_MODE=0
  75. BOOT_BOOTROM="U-Boot 2012.07.9 (Dec 17 2015 - 10:28:35)"
  76. BOOT_KERNEL=primary
  77. CRYPTO_FLAG=3
  78. CURR_VER=U-Boot 2012.07.9 (Dec 17 2015 - 10:28:35) (primary)
  79. DEFAULT_SETTING=0
  80. HW_RELEASE=502
  81. LOGHDR=0x413ffc00
  82. LOGHDRRREASON=0x413ffc24
  83. MODEL=AP3935i-ROW
  84. MOSTRECENTKERNEL=1
  85. NUM_ANTENNAS=8
  86. PriImg=0x3c0000
  87. RADIOADDR0=D8:84:66:50:9E:30
  88. RADIOADDR1=D8:84:66:50:9E:38
  89. REBOOT_PATTERN_WDG=0x5A5A5A5A
  90. REGION=NA
  91. SERIAL#=1608Y-1008600000
  92. SERVICEATTRS=ac_manager,ru_manager
  93. SERVICETYPE=siemens
  94. SecImg=0x11d0000
  95. VERSIONBASE=0
  96. WATCHDOG_COUNT=0x00000000
  97. WATCHDOG_LIMIT=3
  98. WLAN_ORDER_STRING=01
  99. autostart=no
  100. baudrate=115200
  101. boot_diag=if ubifsload 0x42000000 diag.gz.uImage; then if imi 0x42000000; then mtdparts default; bootm 0x42000000 - -; exit; fi; fi;echo ERROR: Problem with diag image, dropping to interactive shell
  102. boot_flash=source boot_kernel
  103. boot_net=tftpboot 0x42000000 vmlinux.gz.uImage.3935; bootm 0x42000000 - -
  104. bootargs=console=ttyHSL0,115200n81 ubi.mtd=0 panic=30 ro BOOT_KERNEL=primary BOOT_BOOTROM="U-Boot 2012.07.9 (Dec 17 2015 - 10:28:35)"
  105. bootcmd=ping 192.168.1.1; run boot_flash
  106. bootdelay=2
  107. eth1addr=D8:84:66:4F:98:BB
  108. ethact=eth0
  109. ethaddr=D8:84:66:4F:98:BA
  110. fileaddr=42000000
  111. filesize=39
  112. ipaddr=192.168.1.1
  113. machid=1260
  114. mem=1048064k
  115. menucmd=run boot_diag
  116. mtddevname=CFG1
  117. mtddevnum=0
  118. mtdids=nand1=nand1
  119. mtdparts=mtdparts=nand1:64k@2688k(CFG1),512k(BootPRI),64k(CFG2),64k(NVRAM1),64k(NVRAM2),64k(NVRAM3),64k(NVRAM4),64k(NVRAM5),64k(NVRAM6),64k(NVRAM7),64k(NVRAM8),14400k(PriImg),14400k(SecImg)
  120. partition=nand1,0
  121. serverip=192.168.1.2
  122. static_bootargs=console=ttyHSL0,115200n81 ubi.mtd=0 panic=30 ro
  123. stderr=serial
  124. stdin=serial
  125. stdout=serial
  126. uboot=CONFIG_UBOOTPATH
  127. ver=U-Boot 2012.07.7-r038300217.1 (Sep 29 2015 - 11:41:04) (back-up)
  128.  
  129. Environment size: 1913/65531 bytes
  130. Boot (BAK)-> set serverip 192.168.1.2 10
  131. Boot (BAK)-> tftpboot openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage
  132. Mac0 unit failed
  133. Mac0 unit failed
  134. Mac0 unit failed
  135. Mac0 unit failed
  136. Full duplex link
  137. Link 2 up, Phy_status = a0b0a0a
  138. Port:2 speed 1000Mbps
  139. Using eth1 device
  140. TFTP from server 192.168.1.10; our IP address is 192.168.1.1
  141. Filename 'openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage'.
  142. Load address: 0x44000000
  143. Loading: *#################################################################
  144. #################################################################
  145. #################################################################
  146. #################################################################
  147. #################################################################
  148. #################################################################
  149. #############################################################
  150. done
  151. Bytes transferred = 6616025 (64f3d9 hex)
  152. Boot (BAK)-> bootm
  153. Image Name: ARM OpenWrt Linux-5.10.79
  154. Image Type: ARM Linux Kernel Image (uncompressed)
  155. Data Size: 6615897 Bytes = 6.3 MiB
  156. Load Address: 41408000
  157. Entry Point: 41408000
  158. Verifying Checksum ... OK
  159. Loading Kernel Image ... OK
  160. OK
  161. Setting up atags for msm partition: nand_flash
  162.  
  163. device nand1 <nand1>, # parts = 13
  164. #: name size offset mask_flags
  165. 0: CFG1 0x00010000 0x002a0000 0
  166. 1: BootPRI 0x00080000 0x002b0000 0
  167. 2: CFG2 0x00010000 0x00330000 0
  168. 3: NVRAM1 0x00010000 0x00340000 0
  169. 4: NVRAM2 0x00010000 0x00350000 0
  170. 5: NVRAM3 0x00010000 0x00360000 0
  171. 6: NVRAM4 0x00010000 0x00370000 0
  172. 7: NVRAM5 0x00010000 0x00380000 0
  173. 8: NVRAM6 0x00010000 0x00390000 0
  174. 9: NVRAM7 0x00010000 0x003a0000 0
  175. 10: NVRAM8 0x00010000 0x003b0000 0
  176. 11: PriImg 0x00e10000 0x003c0000 0
  177. 12: SecImg 0x00e10000 0x011d0000 0
  178.  
  179. active partition: nand1,0 - (CFG1) 0x00010000 @ 0x002a0000
  180.  
  181. defaults:
  182. mtdids : nand1=nand1
  183. mtdparts: mtdparts=nand1:64k@2688k(CFG1),512k(BootPRI),64k(CFG2),64k(NVRAM1),64k(NVRAM2),64k(NVRAM3),64k(NVRAM4),64k(NVRAM5),64k(NVRAM6),64k(NVRAM7),64k(NVRAM8),14400k(PriImg),14400k(SecImg)
  184. Setting up atags for msm partition: CFG1
  185. Setting up atags for msm partition: BootPRI
  186. Setting up atags for msm partition: CFG2
  187. Setting up atags for msm partition: NVRAM1
  188. Setting up atags for msm partition: NVRAM2
  189. Setting up atags for msm partition: NVRAM3
  190. Setting up atags for msm partition: NVRAM4
  191. Setting up atags for msm partition: NVRAM5
  192. Setting up atags for msm partition: NVRAM6
  193. Setting up atags for msm partition: NVRAM7
  194. Setting up atags for msm partition: NVRAM8
  195. Setting up atags for msm partition: PriImg
  196. Setting up atags for msm partition: SecImg
  197. Using machid 0x1260 from environment
  198.  
  199. Starting kernel ...
  200.  
  201. [ 0.000000] Booting Linux on physical CPU 0x0
  202. [ 0.000000] Linux version 5.10.79 (toni@ubuntu2004lts-virtual) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r18107+1-db34b93331) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Wed Nov 17 10:14:58 2021
  203. [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
  204. [ 0.000000] CPU: div instructions available: patching division code
  205. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  206. [ 0.000000] OF: fdt: Machine model: Extreme Networks AP3935i
  207. [ 0.000000] OF: fdt: Ignoring memory range 0x41400000 - 0x42000000
  208. [ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x16640000 (options '')
  209. [ 0.000000] printk: bootconsole [msm_serial_dm0] enabled
  210. [ 0.000000] Memory policy: Data cache writealloc
  211. [ 0.000000] Zone ranges:
  212. [ 0.000000] Normal [mem 0x0000000042000000-0x0000000071ffffff]
  213. [ 0.000000] HighMem [mem 0x0000000072000000-0x000000007fffffff]
  214. [ 0.000000] Movable zone start for each node
  215. [ 0.000000] Early memory node ranges
  216. [ 0.000000] node 0: [mem 0x0000000042000000-0x000000007fffffff]
  217. [ 0.000000] Initmem setup node 0 [mem 0x0000000042000000-0x000000007fffffff]
  218. [ 0.000000] On node 0 totalpages: 253952
  219. [ 0.000000] Normal zone: 1728 pages used for memmap
  220. [ 0.000000] Normal zone: 0 pages reserved
  221. [ 0.000000] Normal zone: 196608 pages, LIFO batch:63
  222. [ 0.000000] HighMem zone: 57344 pages, LIFO batch:15
  223. [ 0.000000] percpu: Embedded 15 pages/cpu s30796 r8192 d22452 u61440
  224. [ 0.000000] pcpu-alloc: s30796 r8192 d22452 u61440 alloc=15*4096
  225. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  226. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 252224
  227. [ 0.000000] Kernel command line: loglevel=8 earlycon=msm_serial_dm,0x16640000 console=ttyMSM0,115200n8 ubi.block=0,0 root=/dev/ubiblock0_0 rootfstype=squashfs
  228. [ 0.000000] Bootloader command line (ignored): console=ttyHSL0,115200n81 ubi.mtd=0 panic=30 ro BOOT_KERNEL=primary BOOT_BOOTROM="U-Boot 2012.07.9 (Dec 17 2015 - 10:28:35)"
  229. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  230. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  231. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  232. [ 0.000000] Memory: 983516K/1015808K available (6719K kernel code, 611K rwdata, 1644K rodata, 12288K init, 233K bss, 32292K reserved, 0K cma-reserved, 229376K highmem)
  233. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  234. [ 0.000000] rcu: Hierarchical RCU implementation.
  235. [ 0.000000] Tracing variant of Tasks RCU enabled.
  236. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  237. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  238. [ 0.000000] random: get_random_bytes called from start_kernel+0x3a0/0x54c with crng_init=0
  239. [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
  240. [ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
  241. [ 0.009634] Switching to timer-based delay loop, resolution 160ns
  242. [ 0.017685] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
  243. [ 0.023525] pid_max: default: 32768 minimum: 301
  244. [ 0.034004] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  245. [ 0.038462] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  246. [ 0.046641] CPU: Testing write buffer coherency: ok
  247. [ 0.053701] qcom_scm: convention: smc legacy
  248. [ 0.059077] Setting up static identity map for 0x42300000 - 0x42300060
  249. [ 0.062745] rcu: Hierarchical SRCU implementation.
  250. [ 0.069259] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  251. [ 0.073913] smp: Bringing up secondary CPUs ...
  252. [ 0.083286] smp: Brought up 1 node, 2 CPUs
  253. [ 0.085759] SMP: Total of 2 processors activated (25.00 BogoMIPS).
  254. [ 0.089925] CPU: All CPU(s) started in SVC mode.
  255. [ 0.106417] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
  256. [ 0.106687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  257. [ 0.113349] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  258. [ 0.123342] pinctrl core: initialized pinctrl subsystem
  259. [ 0.131103] NET: Registered protocol family 16
  260. [ 0.135310] DMA: preallocated 256 KiB pool for atomic coherent allocations
  261. [ 0.140738] thermal_sys: Registered thermal governor 'step_wise'
  262. [ 0.142827] cpuidle: using governor ladder
  263. [ 0.152439] cpuidle: using governor menu
  264. [ 0.200003] usbcore: registered new interface driver usbfs
  265. [ 0.200108] usbcore: registered new interface driver hub
  266. [ 0.204440] usbcore: registered new device driver usb
  267. [ 0.210001] pps_core: LinuxPPS API ver. 1 registered
  268. [ 0.214803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  269. [ 0.219870] PTP clock support registered
  270. [ 0.231301] clocksource: Switched to clocksource dg_timer
  271. [ 0.233928] NET: Registered protocol family 2
  272. [ 0.238325] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  273. [ 0.243764] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  274. [ 0.250093] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  275. [ 0.258194] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  276. [ 0.266191] TCP: Hash tables configured (established 8192 bind 8192)
  277. [ 0.273244] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  278. [ 0.279501] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  279. [ 0.286162] NET: Registered protocol family 1
  280. [ 0.293234] PCI: CLS 0 bytes, default 64
  281. [ 0.499711] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  282. [ 0.505642] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  283. [ 0.505678] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  284. [ 0.616278] bounce: pool size: 64 pages
  285. [ 0.618621] qcom-pcie 1b500000.pci: supply vdda not found, using dummy regulator
  286. [ 0.619165] qcom-pcie 1b500000.pci: supply vdda_phy not found, using dummy regulator
  287. [ 0.626768] qcom-pcie 1b500000.pci: supply vdda_refclk not found, using dummy regulator
  288. [ 0.634634] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
  289. [ 0.642096] qcom-pcie 1b500000.pci: Parsing ranges property...
  290. [ 0.648993] qcom-pcie 1b500000.pci: IO 0x000fe00000..0x000fe0ffff -> 0x000fe00000
  291. [ 0.654792] qcom-pcie 1b500000.pci: MEM 0x0008000000..0x000fdfffff -> 0x0008000000
  292. [ 0.888792] qcom-pcie 1b500000.pci: Link up
  293. [ 0.888979] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
  294. [ 0.891898] pci_bus 0000:00: root bus resource [bus 00-ff]
  295. [ 0.898042] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xfe00000-0xfe0ffff])
  296. [ 0.903597] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
  297. [ 0.912872] pci_bus 0000:00: scanning bus
  298. [ 0.919698] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
  299. [ 0.923941] pci 0000:00:00.0: supports D1
  300. [ 0.929803] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  301. [ 0.933810] pci 0000:00:00.0: PME# disabled
  302. [ 0.943237] pci_bus 0000:00: fixups for bus
  303. [ 0.943443] PCI: bus0: Fast back to back transfers disabled
  304. [ 0.947605] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
  305. [ 0.953387] pci_bus 0000:01: scanning bus
  306. [ 0.960425] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
  307. [ 0.964354] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  308. [ 0.971445] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  309. [ 0.976888] pci 0000:01:00.0: PME# disabled
  310. [ 0.986894] pci_bus 0000:01: fixups for bus
  311. [ 0.986998] PCI: bus1: Fast back to back transfers disabled
  312. [ 0.991005] pci_bus 0000:01: bus scan returning with max=01
  313. [ 0.996636] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
  314. [ 1.002194] pci_bus 0000:00: bus scan returning with max=ff
  315. [ 1.009083] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
  316. [ 1.014453] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
  317. [ 1.021439] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  318. [ 1.028500] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
  319. [ 1.033904] pcieport 0000:00:00.0: assign IRQ: got 42
  320. [ 1.041330] pcieport 0000:00:00.0: AER: enabled with IRQ 43
  321. [ 1.045800] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
  322. [ 1.050994] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100547)
  323. [ 1.059419] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
  324. [ 1.067135] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10010)
  325. [ 1.075486] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0x0)
  326. [ 1.083288] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0)
  327. [ 1.090749] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
  328. [ 1.098469] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0xf0)
  329. [ 1.106810] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x8100800)
  330. [ 1.114526] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
  331. [ 1.122586] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0)
  332. [ 1.130332] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0)
  333. [ 1.138060] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0)
  334. [ 1.145704] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x40)
  335. [ 1.153326] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0)
  336. [ 1.161235] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x3012a)
  337. [ 1.169346] qcom-pcie 1b700000.pci: supply vdda not found, using dummy regulator
  338. [ 1.176931] qcom-pcie 1b700000.pci: supply vdda_phy not found, using dummy regulator
  339. [ 1.184411] qcom-pcie 1b700000.pci: supply vdda_refclk not found, using dummy regulator
  340. [ 1.192305] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
  341. [ 1.199696] qcom-pcie 1b700000.pci: Parsing ranges property...
  342. [ 1.206755] qcom-pcie 1b700000.pci: IO 0x0031e00000..0x0031e0ffff -> 0x0031e00000
  343. [ 1.212452] qcom-pcie 1b700000.pci: MEM 0x002e000000..0x0031dfffff -> 0x002e000000
  344. [ 1.448395] qcom-pcie 1b700000.pci: Link up
  345. [ 1.448583] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
  346. [ 1.451397] pci_bus 0001:00: root bus resource [bus 00-ff]
  347. [ 1.457746] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x31e00000-0x31e0ffff])
  348. [ 1.463199] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
  349. [ 1.472816] pci_bus 0001:00: scanning bus
  350. [ 1.479642] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
  351. [ 1.483875] pci 0001:00:00.0: supports D1
  352. [ 1.489754] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
  353. [ 1.493749] pci 0001:00:00.0: PME# disabled
  354. [ 1.503140] pci_bus 0001:00: fixups for bus
  355. [ 1.503392] PCI: bus0: Fast back to back transfers disabled
  356. [ 1.507555] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
  357. [ 1.513333] pci_bus 0001:01: scanning bus
  358. [ 1.520379] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
  359. [ 1.524325] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  360. [ 1.531393] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
  361. [ 1.536832] pci 0001:01:00.0: PME# disabled
  362. [ 1.546814] pci_bus 0001:01: fixups for bus
  363. [ 1.546918] PCI: bus1: Fast back to back transfers disabled
  364. [ 1.550955] pci_bus 0001:01: bus scan returning with max=01
  365. [ 1.556608] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
  366. [ 1.562139] pci_bus 0001:00: bus scan returning with max=ff
  367. [ 1.569028] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
  368. [ 1.574396] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
  369. [ 1.581382] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
  370. [ 1.588442] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
  371. [ 1.593844] pcieport 0001:00:00.0: assign IRQ: got 44
  372. [ 1.601293] pcieport 0001:00:00.0: AER: enabled with IRQ 45
  373. [ 1.605743] pcieport 0001:00:00.0: saving config space at offset 0x0 (reading 0x10117cb)
  374. [ 1.610945] pcieport 0001:00:00.0: saving config space at offset 0x4 (reading 0x100547)
  375. [ 1.619366] pcieport 0001:00:00.0: saving config space at offset 0x8 (reading 0xff000000)
  376. [ 1.627081] pcieport 0001:00:00.0: saving config space at offset 0xc (reading 0x10010)
  377. [ 1.635432] pcieport 0001:00:00.0: saving config space at offset 0x10 (reading 0x0)
  378. [ 1.643232] pcieport 0001:00:00.0: saving config space at offset 0x14 (reading 0x0)
  379. [ 1.650698] pcieport 0001:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
  380. [ 1.658415] pcieport 0001:00:00.0: saving config space at offset 0x1c (reading 0xf0)
  381. [ 1.666756] pcieport 0001:00:00.0: saving config space at offset 0x20 (reading 0x2e102e00)
  382. [ 1.674473] pcieport 0001:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
  383. [ 1.682563] pcieport 0001:00:00.0: saving config space at offset 0x28 (reading 0x0)
  384. [ 1.690368] pcieport 0001:00:00.0: saving config space at offset 0x2c (reading 0x0)
  385. [ 1.698099] pcieport 0001:00:00.0: saving config space at offset 0x30 (reading 0x0)
  386. [ 1.705712] pcieport 0001:00:00.0: saving config space at offset 0x34 (reading 0x40)
  387. [ 1.713366] pcieport 0001:00:00.0: saving config space at offset 0x38 (reading 0x0)
  388. [ 1.721272] pcieport 0001:00:00.0: saving config space at offset 0x3c (reading 0x3012c)
  389. [ 1.731678] L2 @ QSB rate. Forcing new rate.
  390. [ 1.736844] L2 @ 384000 KHz
  391. [ 1.741314] CPU0 @ 800000 KHz
  392. [ 1.743728] CPU1 @ QSB rate. Forcing new rate.
  393. [ 1.746904] CPU1 @ 384000 KHz
  394. [ 1.755594] gsbi 12480000.gsbi: GSBI port protocol: 6 crci: 0
  395. [ 1.757389] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
  396. [ 1.761294] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
  397. [ 1.767733] gsbi 16600000.gsbi: GSBI port protocol: 6 crci: 0
  398. [ 1.773857] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  399. [ 1.778311] msm_serial 12490000.serial: msm_serial: detected port #1
  400. [ 1.784066] msm_serial 12490000.serial: uartclk = 25000000
  401. [ 1.790335] 12490000.serial: ttyMSM1 at MMIO 0x12490000 (irq = 46, base_baud = 1562500) is a MSM
  402. [ 1.796031] msm_serial 16640000.serial: msm_serial: detected port #0
  403. [ 1.804615] msm_serial 16640000.serial: uartclk = 7372800
  404. [ 1.810891] 16640000.serial: ttyMSM0 at MMIO 0x16640000 (irq = 48, base_baud = 46080À[ 1.824806] printk: console [ttyMSM0] enabled
  405. [ 1.824806] printk: console [ttyMSM0] enabled
  406. [ 1.828143] printk: bootconsole [msm_serial_dm0] disabled
  407. [ 1.828143] printk: bootconsole [msm_serial_dm0] disabled
  408. [ 1.838270] msm_serial: driver initialized
  409. [ 1.848997] loop: module loaded
  410. [ 1.850848] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xac
  411. [ 1.850955] nand: Macronix MX30UF4G28AB
  412. [ 1.857665] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 112
  413. [ 1.861122] Block protection check failed
  414. [ 1.868854] 1 fixed-partitions partitions found on MTD device qcom_nand.0
  415. [ 1.873017] Creating 1 MTD partitions on "qcom_nand.0":
  416. [ 1.879691] 0x000000000000-0x000020000000 : "ubi"
  417. [ 1.893154] random: fast init done
  418. [ 2.374320] random: crng init done
  419. [ 3.239793] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  420. [ 3.242676] spi-nor spi0.0: s25fl256s1 (32768 Kbytes)
  421. [ 3.246085] 6 fixed-partitions partitions found on MTD device spi0.0
  422. [ 3.250967] Creating 6 MTD partitions on "spi0.0":
  423. [ 3.257519] 0x0000002a0000-0x0000002b0000 : "CFG1"
  424. [ 3.263323] 0x0000002b0000-0x000000330000 : "BootPRI"
  425. [ 3.267621] 0x000000330000-0x000000340000 : "CFG2"
  426. [ 3.272810] 0x000000340000-0x0000003c0000 : "FS"
  427. [ 3.277365] 0x0000003c0000-0x0000011d0000 : "PriImg"
  428. [ 3.282288] 0x0000011d0000-0x000001fe0000 : "SecImg"
  429. [ 3.294051] libphy: Fixed MDIO Bus: probed
  430. [ 3.294749] mdio-gpio soc:mdio: failed to get alias id
  431. [ 3.297947] libphy: GPIO Bitbanged MDIO: probed
  432. [ 3.349489] ipq806x-gmac-dwmac 37000000.ethernet: IRQ eth_wake_irq not found
  433. [ 3.349556] ipq806x-gmac-dwmac 37000000.ethernet: IRQ eth_lpi not found
  434. [ 3.356161] ipq806x-gmac-dwmac 37000000.ethernet: PTP uses main clock
  435. [ 3.362934] ipq806x-gmac-dwmac 37000000.ethernet: User ID: 0x10, Synopsys ID: 0x37
  436. [ 3.368577] ipq806x-gmac-dwmac 37000000.ethernet: DWMAC1000
  437. [ 3.376158] ipq806x-gmac-dwmac 37000000.ethernet: DMA HW capability register supported
  438. [ 3.381979] ipq806x-gmac-dwmac 37000000.ethernet: RX Checksum Offload Engine supported
  439. [ 3.389576] ipq806x-gmac-dwmac 37000000.ethernet: COE Type 2
  440. [ 3.397551] ipq806x-gmac-dwmac 37000000.ethernet: TX Checksum insertion supported
  441. [ 3.403361] ipq806x-gmac-dwmac 37000000.ethernet: Wake-Up On Lan supported
  442. [ 3.410670] ipq806x-gmac-dwmac 37000000.ethernet: Enhanced/Alternate descriptors
  443. [ 3.417513] ipq806x-gmac-dwmac 37000000.ethernet: Enabled extended descriptors
  444. [ 3.425074] ipq806x-gmac-dwmac 37000000.ethernet: Ring mode enabled
  445. [ 3.432104] ipq806x-gmac-dwmac 37000000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  446. [ 3.438207] ipq806x-gmac-dwmac 37000000.ethernet: device MAC address 26:56:35:0a:4d:b4
  447. [ 3.449877] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_wake_irq not found
  448. [ 3.454695] ipq806x-gmac-dwmac 37400000.ethernet: IRQ eth_lpi not found
  449. [ 3.462220] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
  450. [ 3.468545] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
  451. [ 3.474833] ipq806x-gmac-dwmac 37400000.ethernet: DWMAC1000
  452. [ 3.482273] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
  453. [ 3.488006] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
  454. [ 3.495805] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
  455. [ 3.503696] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
  456. [ 3.509445] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
  457. [ 3.516911] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
  458. [ 3.523659] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
  459. [ 3.531146] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
  460. [ 3.538248] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  461. [ 3.544441] ipq806x-gmac-dwmac 37400000.ethernet: device MAC address c6:76:b1:a3:ce:f3
  462. [ 4.261704] libphy: stmmac: probed
  463. [ 4.263775] i2c /dev entries driver
  464. [ 4.268438] sdhci: Secure Digital Host Controller Interface driver
  465. [ 4.268476] sdhci: Copyright(c) Pierre Ossman
  466. [ 4.273738] sdhci-pltfm: SDHCI platform and OF driver helper
  467. [ 4.280566] NET: Registered protocol family 10
  468. [ 4.285328] Segment Routing with IPv6
  469. [ 4.288139] NET: Registered protocol family 17
  470. [ 4.292164] 8021q: 802.1Q VLAN Support v1.8
  471. [ 4.296236] Registering SWP/SWPB emulation handler
  472. [ 4.330984] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
  473. [ 4.344979] s1a: Bringing 0uV into 1050000-1050000uV
  474. [ 4.345271] s1a: supplied by regulator-dummy
  475. [ 4.349164] s1b: Bringing 0uV into 1050000-1050000uV
  476. [ 4.353591] s1b: supplied by regulator-dummy
  477. [ 4.358358] s2a: Bringing 0uV into 800000-800000uV
  478. [ 4.362767] s2a: supplied by regulator-dummy
  479. [ 4.367203] s2b: Bringing 0uV into 800000-800000uV
  480. [ 4.371809] s2b: supplied by regulator-dummy
  481. [ 4.381587] thermal thermal_zone0: failed to read out thermal zone (-110)
  482. [ 4.396200] UBI: auto-attach mtd0
  483. [ 4.396224] ubi0: attaching mtd0
  484. [ 26.931090] ubi0: scanning is finished
  485. [ 26.955596] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 40, need 80
  486. [ 26.958204] ubi0: attached mtd0 (name "ubi", size 512 MiB)
  487. [ 26.964568] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  488. [ 26.969871] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  489. [ 26.976806] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  490. [ 26.983677] ubi0: good PEBs: 4096, bad PEBs: 0, corrupted PEBs: 0
  491. [ 26.990354] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  492. [ 26.996676] ubi0: max/mean erase counter: 22/4, WL threshold: 4096, image sequence number: 1373618189
  493. [ 27.003797] ubi0: available PEBs: 0, total reserved PEBs: 4096, PEBs reserved for bad PEB handling: 40
  494. [ 27.013225] ubi0: background thread "ubi_bgt0d" started, PID ÿ[ 27.036056] Freeing unused kernel memory: 12288K
  495. [ 27.036380] Run /init as init process
  496. [ 27.039734] with arguments:
  497. [ 27.043371] /init
  498. [ 27.046241] with environment:
  499. [ 27.048500] HOME=/
  500. [ 27.051451] TERM=linux
  501. [ 27.472155] init: Console is alive
  502. [ 27.472458] init: - watchdog -
  503. [ 27.474617] init: Watchdog has previously reset the system
  504. [ 27.497628] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  505. [ 27.502086] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 49
  506. [ 27.505545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  507. [ 27.517913] SCSI subsystem initialized
  508. [ 27.527381] libata version 3.00 loaded.
  509. [ 27.532367] ehci-fsl: Freescale EHCI Host controller driver
  510. [ 27.535288] ehci-platform: EHCI generic platform driver
  511. [ 27.541331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  512. [ 27.542696] ohci-platform: OHCI generic platform driver
  513. [ 27.556531] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  514. [ 27.566220] init: - preinit -
  515. [ 28.149668] ipq806x-gmac-dwmac 37400000.ethernet eth1: PHY [gpio-0:02] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
  516. [ 28.151182] dwmac1000: Master AXI performs any burst length
  517. [ 28.159752] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
  518. [ 28.165125] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
  519. [ 28.173392] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
  520. [ 28.183657] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for phy/sgmii link mode
  521. Press the [f] key and hit [enter] to enter failsafe mode
  522. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  523. [ 31.368017] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
  524. [ 31.368123] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  525. [ 32.363319] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
  526. [ 32.371536] procd: - early -
  527. [ 32.371925] procd: - watchdog -
  528. [ 32.373718] procd: Watchdog has previously reset the system
  529. [ 32.929602] procd: - watchdog -
  530. [ 32.929852] procd: Watchdog has previously reset the system
  531. [ 32.932500] procd: - ubus -
  532. [ 32.994286] procd: - init -
  533. Please press Enter to activate this console.
  534. [ 33.218007] urngd: v1.0.2 started.
  535. [ 33.237744] kmodloader: loading kernel modules from /etc/modules.d/*
  536. [ 33.248352] Loading modules backported from Linux version v5.15-rc6-0-g519d81956ee2
  537. [ 33.248380] Backport generated by backports.git v5.15-rc6-1-0-gd44432d6
  538. [ 33.275404] xt_time: kernel timezone is -0000
  539. [ 33.328152] PPP generic driver version 2.4.2
  540. [ 33.332776] NET: Registered protocol family 24
  541. [ 33.361576] ath10k_pci 0000:01:00.0: assign IRQ: got 42
  542. [ 33.361708] ath10k 5.10 driver, optimized for CT firmware, probing pci device: 0x40.
  543. [ 33.366306] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
  544. [ 33.373785] ath10k_pci 0000:01:00.0: enabling bus mastering
  545. [ 33.380278] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  546. [ 34.056559] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
  547. [ 34.056594] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  548. [ 34.066741] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9980-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 b36a12bf
  549. [ 34.137716] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:4 crc32 08fa09f2
  550. [ 35.287524] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  551. [ 35.287567] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
  552. [ 35.367735] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  553. [ 35.368487] ath10k_pci 0000:01:00.0: wmi print 'free: 31080 iram: 23028 sram: 9596'
  554. [ 35.648346] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
  555. [ 35.743552] ath: EEPROM regdomain sanitized
  556. [ 35.743595] ath: EEPROM regdomain: 0x64
  557. [ 35.746583] ath: EEPROM indicates we should expect a direct regpair map
  558. [ 35.750388] ath: Country alpha2 being used: 00
  559. [ 35.757060] ath: Regpair used: 0x64
  560. [ 35.766802] ath10k_pci 0001:01:00.0: assign IRQ: got 44
  561. [ 35.766873] ath10k 5.10 driver, optimized for CT firmware, probing pci device: 0x40.
  562. [ 35.772213] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
  563. [ 35.778935] ath10k_pci 0001:01:00.0: enabling bus mastering
  564. [ 35.785521] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  565. [ 36.438733] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003801ff sub 168c:0002
  566. [ 36.438772] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  567. [ 36.448936] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9980-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 b36a12bf
  568. [ 36.519627] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:6 crc32 08fa09f2
  569. [ 37.669558] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  570. [ 37.669589] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
  571. [ 37.751220] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  572. [ 37.751979] ath10k_pci 0001:01:00.0: wmi print 'free: 31080 iram: 23028 sram: 9596'
  573. [ 38.036049] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
  574. [ 38.134033] ath: EEPROM regdomain sanitized
  575. [ 38.134079] ath: EEPROM regdomain: 0x64
  576. [ 38.137035] ath: EEPROM indicates we should expect a direct regpair map
  577. [ 38.140876] ath: Country alpha2 being used: 00
  578. [ 38.147578] ath: Regpair used: 0x64
  579. [ 38.165007] kmodloader: done loading kernel modules from /etc/modules.d/*
  580. [ 54.296911] ipq806x-gmac-dwmac 37400000.ethernet eth1: PHY [gpio-0:02] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
  581. [ 54.297556] dwmac1000: Master AXI performs any burst length
  582. [ 54.307046] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
  583. [ 54.312307] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
  584. [ 54.320332] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
  585. [ 54.329308] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for phy/sgmii link mode
  586. [ 54.339721] br-lan: port 1(eth1) entered blocking state
  587. [ 54.344559] br-lan: port 1(eth1) entered disabled state
  588. [ 54.349764] device eth1 entered promiscuous mode
  589. [ 54.571706] ipq806x-gmac-dwmac 37000000.ethernet: Failed to reset the dma
  590. [ 54.571739] ipq806x-gmac-dwmac 37000000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
  591. [ 54.577477] ipq806x-gmac-dwmac 37000000.ethernet eth0: stmmac_open: Hw setup failed
  592. [ 56.459031] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 10Mbps/Full - flow control off
  593. [ 56.459127] br-lan: port 1(eth1) entered blocking state
  594. [ 56.466997] br-lan: port 1(eth1) entered forwarding state
  595. [ 56.472882] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  596. [ 58.533425] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Down
  597. [ 58.534377] br-lan: port 1(eth1) entered disabled state
  598. [ 60.621573] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
  599. [ 60.621748] br-lan: port 1(eth1) entered blocking state
  600. [ 60.629437] br-lan: port 1(eth1) entered forwarding state
  601.  
  602.  
  603.  
  604. BusyBox v1.34.1 (2021-11-17 10:14:58 UTC) built-in shell (ash)
  605.  
  606. _______ ________ __
  607. | |.-----.-----.-----.| | | |.----.| |_
  608. | - || _ | -__| || | | || _|| _|
  609. |_______|| __|_____|__|__||________||__| |____|
  610. |__| W I R E L E S S F R E E D O M
  611. -----------------------------------------------------
  612. OpenWrt SNAPSHOT, r18107+1-db34b93331
  613. -----------------------------------------------------
  614. === WARNING! =====================================
  615. There is no root password defined on this device!
  616. Use the "passwd" command to set up a new password
  617. in order to prevent unauthorized SSH logins.
  618. --------------------------------------------------
  619. root@OpenWrt:/#
  620. root@OpenWrt:/#
  621. root@OpenWrt:/# systuup
  622. root@OpenWrt:/# sysupgrade /tm
  623. root@OpenWrt:/# sysupgrade /tmp/openwrt-ipq806x-generic-extreme_ap3935i-squashfs
  624.  
  625. -nand-sysupgrade.bin
  626. Cannot save config while running from ramdisk.
  627. Wed Nov 17 10:16:31 UTC 2021 upgrade: Commencing upgrade. Closing all shell sessions.
  628. Watchdog handover: fd=3
  629. - watchdog -
  630. Watchdog has previously reset the system
  631. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending TERM to remaining processes ...
  632. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to hostapd (1300)
  633. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to wpa_supplicant (1301)
  634. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to netifd (1364)
  635. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to odhcpd (1423)
  636. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to ntpd (1934)
  637. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to ntpd (1938)
  638. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to dnsmasq (2172)
  639. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to ubusd (228)
  640. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to urngd (263)
  641. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to uhttpd (681)
  642. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to logd (937)
  643. Wed Nov 17 10:16:31 UTC 2021 upgrade: Sending signal TERM to rpcd (989)
  644. Wed Nov 17 10:16:35 UTC 2021 upgrade: Sending KILL to remaining processes ...
  645. [ 137.037331] sh (2577): drop_caches: 3
  646. Wed Nov 17 10:16:41 UTC 2021 upgrade: Switching to ramdisk...
  647. Wed Nov 17 10:16:43 UTC 2021 upgrade: Performing system upgrade...
  648. Unlocking PriImg ...
  649.  
  650. Writing from <stdin> to PriImg ... [ ][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w]
  651. removing ubiblock0_0
  652. [ 150.661723] block ubiblock0_0: released
  653. [ 150.697010] ubi0: reserved more 40 PEBs for bad PEB handling
  654. Volume ID 0, size 31 LEBs (3936256 bytes, 3.7 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "nand_flash", alignment 1
  655. Set volume size to 505491456
  656. Volume ID 1, size 3981 LEBs (505491456 bytes, 482.0 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1
  657. sysupgrade successful
  658. umount: can't unmount /dev: Resource busy
  659. umount: can't unmount /tmp: Resource busy
  660. [ 153.382687] reboot: Restarting system
  661.  
  662.  
  663. U-Boot 2012.07.7-r038300217.1 (Sep 29 2015 - 11:41:04) (back-up)
  664.  
  665. smem ram ptable found: ver: 0 len: 5
  666. DRAM: 1004 MiB
  667. NAND: SF: Detected S25FL256S with page size 64 KiB, total 32 MiB
  668. ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x2000000
  669. 544 MiB
  670. In: serial
  671. Out: serial
  672. Err: serial
  673. Net: MAC0 addr:dc:ff:ff:eb:04:30
  674. MAC2 addr:00:20:82:e1:02:00
  675. eth0
  676. Warning: eth0 MAC addresses don't match:
  677. Address in SROM is dc:ff:ff:eb:04:30
  678. Address in environment is d8:84:66:4f:98:ba
  679. , eth1
  680. Warning: eth1 MAC addresses don't match:
  681. Address in SROM is 00:20:82:e1:02:00
  682. Address in environment is d8:84:66:4f:98:bb
  683.  
  684. Hit 'd' for diagnostics, or any other key to stop autoboot: 1  0
  685. SF: Detected S25FL256S with page size 64 KiB, total 32 MiB
  686.  
  687. found primary bootROM, load and run...
  688. ## Starting application at 0x41200000 ...
  689.  
  690.  
  691. U-Boot 2012.07.14 (May 04 2017 - 13:14:44) (primary)
  692.  
  693. smem ram ptable found: ver: 0 len: 5
  694. DRAM: 1004 MiB
  695. NAND: SF: Detected S25FL256S with page size 64 KiB, total 32 MiB
  696. ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x2000000
  697. 544 MiB
  698. In: serial
  699. Out: serial
  700. Err: serial
  701. Net: MAC0 addr:dc:ff:ff:eb:04:30
  702. MAC2 addr:00:20:82:e1:02:00
  703. eth0
  704. Warning: eth0 MAC addresses don't match:
  705. Address in SROM is dc:ff:ff:eb:04:30
  706. Address in environment is d8:84:66:4f:98:ba
  707. , eth1
  708. Warning: eth1 MAC addresses don't match:
  709. Address in SROM is 00:20:82:e1:02:00
  710. Address in environment is d8:84:66:4f:98:bb
  711.  
  712. Hit 'd' for diagnostics, or any other key to stop autoboot: 2  1  0
  713. Mac0 unit failed
  714. Mac0 unit failed
  715. Mac0 unit failed
  716. Mac0 unit failed
  717. Full duplex link
  718. Link 2 up, Phy_status = a0b0a0a
  719. Port:2 speed 1000Mbps
  720. Using eth1 device
  721. ping failed; host 192.168.1.1 is not alive
  722. ## Executing script at 7ff5fa08
  723. check for watchdog, limit=3...
  724. check for reset by watchdog...
  725. no watchdog...
  726. bSaveEnviron=0 image_order=1 0
  727. ready to boot kernel...
  728.  
  729. Loading from nand1, offset 0x11d0000
  730. Image Name: 10.41.14.0009
  731. Image Type: ARM Linux Kernel Image (uncompressed)
  732. Data Size: 9810936 Bytes = 9.4 MiB
  733. Load Address: 41408000
  734. Entry Point: 41408000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement