Advertisement
Guest User

XO1-dmesg

a guest
Sep 21st, 2014
257
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.88 KB | None | 0 0
  1. [ 0.000000] Linux version 3.3.8_xo1-20120705.1732.olpc.5d48a2f (kernels@bob.laptop.org) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 PREEMPT Thu Jul 5 17:34:54 EDT 2012
  2. [ 0.000000] OFW detected in memory, cif @ 0xff83ae68 (reserving top 8MB)
  3. [ 0.000000] Reserving virtual address space above 0xff800000
  4. [ 0.000000] BIOS-provided physical RAM map:
  5. [ 0.000000] BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
  6. [ 0.000000] BIOS-e801: 0000000000100000 - 000000000e6f7400 (usable)
  7. [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
  8. [ 0.000000] DMI 2.1 present.
  9. [ 0.000000] DMI: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014
  10. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  11. [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  12. [ 0.000000] last_pfn = 0xe6f7 max_arch_pfn = 0x100000
  13. [ 0.000000] initial memory mapped : 0 - 00c00000
  14. [ 0.000000] Base memory trampoline at [c009e000] 9e000 size 4096
  15. [ 0.000000] init_memory_mapping: 0000000000000000-000000000e6f7000
  16. [ 0.000000] 0000000000 - 0000400000 page 4k
  17. [ 0.000000] 0000400000 - 000e400000 page 2M
  18. [ 0.000000] 000e400000 - 000e6f7000 page 4k
  19. [ 0.000000] kernel direct mapping tables up to e6f7000 @ bfb000-c00000
  20. [ 0.000000] RAMDISK: 0e6f7600 - 0ec00000
  21. [ 0.000000] Allocated new RAMDISK: 0e1ee000 - 0e6f6a00
  22. [ 0.000000] Move RAMDISK from 000000000e6f7600 - 000000000ebfffff to 0e1ee000 - 0e6f69ff
  23. [ 0.000000] 230MB LOWMEM available.
  24. [ 0.000000] mapped low ram: 0 - 0e6f7000
  25. [ 0.000000] low ram: 0 - 0e6f7000
  26. [ 0.000000] PROM DT: Built device tree with 45056 bytes of memory.
  27. [ 0.000000] Zone PFN ranges:
  28. [ 0.000000] DMA 0x00000010 -> 0x00001000
  29. [ 0.000000] Normal 0x00001000 -> 0x0000e6f7
  30. [ 0.000000] Movable zone start PFN for each node
  31. [ 0.000000] Early memory PFN ranges
  32. [ 0.000000] 0: 0x00000010 -> 0x0000009f
  33. [ 0.000000] 0: 0x00000100 -> 0x0000e6f7
  34. [ 0.000000] On node 0 totalpages: 59014
  35. [ 0.000000] free_area_init_node: node 0, pgdat c07c80c4, node_mem_map ce013200
  36. [ 0.000000] DMA zone: 32 pages used for memmap
  37. [ 0.000000] DMA zone: 0 pages reserved
  38. [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
  39. [ 0.000000] Normal zone: 430 pages used for memmap
  40. [ 0.000000] Normal zone: 54601 pages, LIFO batch:15
  41. [ 0.000000] Allocating PCI resources starting at e6f7400 (gap: e6f7400:f1908c00)
  42. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  43. [ 0.000000] pcpu-alloc: [0] 0
  44. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 58552
  45. [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty0 fbcon=font:SUN12x22 no_console_suspend selinux=0
  46. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  47. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  49. [ 0.000000] Initializing CPU#0
  50. [ 0.000000] Memory: 224376k/236508k available (2762k kernel code, 11680k reserved, 1132k data, 240k init, 0k highmem)
  51. [ 0.000000] virtual kernel memory layout:
  52. [ 0.000000] fixmap : 0xff7e5000 - 0xff7ff000 ( 104 kB)
  53. [ 0.000000] vmalloc : 0xceef7000 - 0xff7e3000 ( 776 MB)
  54. [ 0.000000] lowmem : 0xc0000000 - 0xce6f7000 ( 230 MB)
  55. [ 0.000000] .init : 0xc07ce000 - 0xc080a000 ( 240 kB)
  56. [ 0.000000] .data : 0xc06b2ba5 - 0xc07cdf00 (1132 kB)
  57. [ 0.000000] .text : 0xc0400000 - 0xc06b2ba5 (2762 kB)
  58. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  59. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  60. [ 0.000000] CPU 0 irqstacks, hard=cd806000 soft=cd808000
  61. [ 0.000000] Console: colour EGA 80x25
  62. [ 0.000000] console [tty0] enabled
  63. [ 0.000000] console [ttyS0] enabled
  64. [ 0.000000] Fast TSC calibration using PIT
  65. [ 0.000000] Detected 430.879 MHz processor.
  66. [ 0.030007] Calibrating delay loop (skipped), value calculated using timer frequency.. 861.75 BogoMIPS (lpj=4308790)
  67. [ 0.042786] pid_max: default: 4096 minimum: 301
  68. [ 0.047704] Security Framework initialized
  69. [ 0.050128] Mount-cache hash table entries: 512
  70. [ 0.062978] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
  71. [ 0.069928] Performance Events: no PMU driver, software events only.
  72. [ 0.074100] devtmpfs: initialized
  73. [ 0.080907] NET: Registered protocol family 16
  74. [ 0.086494] OLPC board revision C2 (EC=58)
  75. [ 0.090895] olpc-xo1-rtc: Initializing OLPC XO-1 RTC
  76. [ 0.096361] PCI: Using configuration type OLPC XO-1
  77. [ 0.105048] bio: create slab <bio-0> at 0
  78. [ 0.111037] SCSI subsystem initialized
  79. [ 0.115039] usbcore: registered new interface driver usbfs
  80. [ 0.120127] usbcore: registered new interface driver hub
  81. [ 0.125626] usbcore: registered new device driver usb
  82. [ 0.130492] Advanced Linux Sound Architecture Driver Version 1.0.24.
  83. [ 0.140080] PCI: Probing PCI hardware
  84. [ 0.143815] PCI: Probing PCI hardware (bus 00)
  85. [ 0.143833] PCI: root bus 00: using default resources
  86. [ 0.144019] PCI host bridge to bus 0000:00
  87. [ 0.148200] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  88. [ 0.150019] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  89. [ 0.160063] pci 0000:00:01.0: [1022:0028] type 0 class 0x000600
  90. [ 0.160163] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300
  91. [ 0.160200] pci 0000:00:01.1: reg 10: [mem 0xfd000000-0xfdffffff]
  92. [ 0.160233] pci 0000:00:01.1: reg 14: [mem 0xfe000000-0xfe003fff]
  93. [ 0.160265] pci 0000:00:01.1: reg 18: [mem 0xfe004000-0xfe007fff]
  94. [ 0.160298] pci 0000:00:01.1: reg 1c: [mem 0xfe008000-0xfe00bfff]
  95. [ 0.160330] pci 0000:00:01.1: reg 20: [mem 0xfe00c000-0xfe00ffff]
  96. [ 0.160404] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
  97. [ 0.160438] pci 0000:00:01.2: reg 10: [mem 0xfe010000-0xfe013fff]
  98. [ 0.160564] pci 0000:00:0c.0: [11ab:4100] type 0 class 0x000501
  99. [ 0.160615] pci 0000:00:0c.0: reg 10: [mem 0xfe020000-0xfe023fff]
  100. [ 0.160787] pci 0000:00:0c.1: [11ab:4101] type 0 class 0x000805
  101. [ 0.160839] pci 0000:00:0c.1: reg 10: [mem 0xfe024000-0xfe027fff]
  102. [ 0.160955] pci 0000:00:0c.1: supports D1
  103. [ 0.160977] pci 0000:00:0c.1: PME# supported from D0 D3hot
  104. [ 0.161064] pci 0000:00:0c.2: [11ab:4102] type 0 class 0x000400
  105. [ 0.161115] pci 0000:00:0c.2: reg 10: [mem 0xfe028000-0xfe02bfff]
  106. [ 0.161279] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
  107. [ 0.161312] pci 0000:00:0f.0: reg 10: [io 0x18b0-0x18b7]
  108. [ 0.161343] pci 0000:00:0f.0: reg 14: [io 0x1000-0x10ff]
  109. [ 0.161373] pci 0000:00:0f.0: reg 18: [io 0x1800-0x183f]
  110. [ 0.161404] pci 0000:00:0f.0: reg 1c: [io 0x1880-0x189f]
  111. [ 0.161434] pci 0000:00:0f.0: reg 20: [io 0x1400-0x147f]
  112. [ 0.161464] pci 0000:00:0f.0: reg 24: [io 0x1840-0x187f]
  113. [ 0.161539] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401
  114. [ 0.161573] pci 0000:00:0f.3: reg 10: [io 0x1480-0x14ff]
  115. [ 0.161669] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
  116. [ 0.161706] pci 0000:00:0f.4: reg 10: [mem 0xfe01a000-0xfe01afff]
  117. [ 0.161772] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
  118. [ 0.161845] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
  119. [ 0.161883] pci 0000:00:0f.5: reg 10: [mem 0xfe01b000-0xfe01bfff]
  120. [ 0.161949] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
  121. [ 0.164205] PCI: pci_cache_line_size set to 32 bytes
  122. [ 0.164340] reserve RAM buffer: 000000000009f000 - 000000000009ffff
  123. [ 0.164364] reserve RAM buffer: 000000000e6f7400 - 000000000fffffff
  124. [ 0.165218] Switching to clocksource pit
  125. [ 0.181746] PCI: max bus depth: 0 pci_try_num: 1
  126. [ 0.181795] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  127. [ 0.181822] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
  128. [ 0.182092] NET: Registered protocol family 2
  129. [ 0.186747] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  130. [ 0.194284] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  131. [ 0.201717] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  132. [ 0.208382] TCP: Hash tables configured (established 8192 bind 8192)
  133. [ 0.214853] TCP reno registered
  134. [ 0.218283] NET: Registered protocol family 1
  135. [ 0.222798] pci 0000:00:01.1: Boot video device
  136. [ 0.279351] PCI: CLS 32 bytes, default 32
  137. [ 0.279613] Trying to unpack rootfs image as initramfs...
  138. [ 0.369455] Freeing initrd memory: 5156k freed
  139. [ 0.382233] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  140. [ 0.390022] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  141. [ 0.397862] msgmni has been set to 448
  142. [ 0.402573] io scheduler noop registered
  143. [ 0.406665] io scheduler cfq registered (default)
  144. [ 0.418656] lxfb 0000:00:01.1: 16384 KB of video memory at 0xfd000000
  145. [ 0.565980] Console: switching to colour frame buffer device 100x40
  146. [ 0.617986] fb0: Geode LX frame buffer device
  147. [ 0.623613] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  148. [ 0.909405] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
  149. [ 0.917367] Non-volatile memory driver v1.3
  150. [ 0.922246] AMD Geode RNG detected
  151. [ 0.934730] brd: module loaded
  152. [ 0.938594] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1000-0x10ff]
  153. [ 0.947231] gpiochip_add: registered GPIOs 0 to 31 on device: cs5535-gpio
  154. [ 0.955546] OLPC XO-1 support registered
  155. [ 0.960685] input: Power Button as /devices/pci0000:00/0000:00:0f.0/olpc-xo1-sci-acpi/input/input0
  156. [ 0.972915] input: EBook Switch as /devices/pci0000:00/0000:00:0f.0/olpc-xo1-sci-acpi/input/input1
  157. [ 0.979943] input: Lid Switch as /devices/pci0000:00/0000:00:0f.0/olpc-xo1-sci-acpi/input/input2
  158. [ 1.016452] olpc-xo1-sci-acpi olpc-xo1-sci-acpi: SCI is mapped to IRQ 3
  159. [ 1.023904] cs5535-mfd 0000:00:0f.0: 5 devices registered.
  160. [ 1.042138] ONFI flash detected
  161. [ 1.052732] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
  162. [ 1.060192] 2 NAND chips detected
  163. [ 1.072875] Bad block table found at page 524224, version 0x01
  164. [ 1.089029] Bad block table found at page 524160, version 0x01
  165. [ 1.095315] nand_read_bbt: bad block at 0x00000fc40000
  166. [ 1.101445] nand_read_bbt: bad block at 0x00002a980000
  167. [ 1.117542] nand_read_bbt: bad block at 0x0000330a0000
  168. [ 1.125147] Searching for RedBoot partition table in cafe_nand at offset 0x0
  169. [ 1.141061] No RedBoot partition table detected in cafe_nand
  170. [ 1.150284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  171. [ 1.160409] ehci_hcd 0000:00:0f.5: setting latency timer to 64
  172. [ 1.160435] ehci_hcd 0000:00:0f.5: EHCI Host Controller
  173. [ 1.169709] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
  174. [ 1.209333] ehci_hcd 0000:00:0f.5: cache line size of 32 is not supported
  175. [ 1.209386] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xfe01b000
  176. [ 1.239340] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
  177. [ 1.251196] hub 1-0:1.0: USB hub found
  178. [ 1.260334] hub 1-0:1.0: 4 ports detected
  179. [ 1.269749] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  180. [ 1.281531] ohci_hcd 0000:00:0f.4: setting latency timer to 64
  181. [ 1.281557] ohci_hcd 0000:00:0f.4: OHCI Host Controller
  182. [ 1.291898] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
  183. [ 1.304598] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xfe01a000
  184. [ 1.379321] Switching to clocksource tsc
  185. [ 1.420576] hub 2-0:1.0: USB hub found
  186. [ 1.448607] hub 2-0:1.0: 4 ports detected
  187. [ 1.477179] Initializing USB Mass Storage driver...
  188. [ 1.506653] usbcore: registered new interface driver usb-storage
  189. [ 1.537259] USB Mass Storage support registered.
  190. [ 1.566036] usbcore: registered new interface driver libusual
  191. [ 1.595868] usb 1-1: new high-speed USB device number 2 using ehci_hcd
  192. [ 1.636983] serio: i8042 KBD port at 0x60,0x64 irq 1
  193. [ 1.665335] serio: i8042 AUX port at 0x60,0x64 irq 12
  194. [ 1.694039] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
  195. [ 1.722463] rtc0: alarms up to one year, y3k, 114 bytes nvram
  196. [ 1.749949] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
  197. [ 1.778231] Linux video capture interface: v2.00
  198. [ 1.818373] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  199. [ 1.931301] cpuidle: using governor ladder
  200. [ 1.980160] cpuidle: using governor menu
  201. [ 2.032017] sdhci: Secure Digital Host Controller Interface driver
  202. [ 2.080560] sdhci: Copyright(c) Pierre Ossman
  203. [ 2.106253] sdhci-pci 0000:00:0c.1: SDHCI controller found [11ab:4101] (rev 10)
  204. [ 2.135401] sdhci-pci 0000:00:0c.1: Invalid iomem size. You may experience problems.
  205. [ 2.165768] Registered led device: mmc0::
  206. [ 2.166983] mmc0: SDHCI controller on PCI [0000:00:0c.1] using DMA
  207. [ 2.196695] geode-aes: GEODE AES engine enabled.
  208. [ 2.224265] i2c-core: driver [olpc_dcon] using legacy suspend method
  209. [ 2.253482] i2c-core: driver [olpc_dcon] using legacy resume method
  210. [ 2.285879] olpc-dcon: Discovered DCON version 2
  211. [ 2.317853] snd_cs5535audio 0000:00:0f.3: setting latency timer to 64
  212. [ 2.321639] Failure reading codec reg 0x7e,Last value=0x7e805368
  213. [ 2.350372] Failure reading codec reg 0x7e,Last value=0x7e805368
  214. [ 2.389238] ALSA device list:
  215. [ 2.414128] #0: CS5535 Audio cs5535audio at 0x1480, irq 5
  216. [ 2.442383] TCP bic registered
  217. [ 2.467663] Initializing XFRM netlink socket
  218. [ 2.494396] NET: Registered protocol family 10
  219. [ 2.521767] Mobile IPv6
  220. [ 2.545931] NET: Registered protocol family 17
  221. [ 2.573274] Registering the dns_resolver key type
  222. [ 2.602079] Freeing unused kernel memory: 240k freed
  223. [ 2.629763] Write protecting the kernel text: 2764k
  224. [ 2.658022] Write protecting the kernel read-only data: 936k
  225. [ 2.724073] tmpfs: No value for mount option 'strictatime'
  226. [ 2.772586] tmpfs: No value for mount option 'strictatime'
  227. [ 2.827192] tmpfs: No value for mount option 'strictatime'
  228. [ 2.935844] dracut: dracut-018-40.git20120522.fc17
  229. [ 2.996634] udevd[55]: starting version 182
  230. [ 10.482677] JFFS2 notice: (92) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  231. [ 10.555712] dracut: Mounted root filesystem mtd0
  232. [ 10.597880] System isn't partitioned, won't resize
  233. [ 13.056670] dcon_freeze_store: 0
  234. [ 13.059939] dcon_source_switch to CPU
  235. [ 13.085461] olpc-dcon: The CPU has control
  236. [ 13.184646] dracut: Switching root
  237. [ 13.684304] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
  238. [ 13.699047] systemd[1]: Set hostname to <xo-42-ba-a2.localdomain>.
  239. [ 14.461966] udevd[150]: starting version 182
  240. [ 16.848815] psmouse serio1: hgpk: ID: 67 00 50
  241. [ 16.848841] psmouse serio1: hgpk: OLPC touchpad revision 0x50
  242. [ 16.930099] Marvell M88ALP01 'CAFE' Camera Controller version 2
  243. [ 16.936128] cafe1000-ccic 0000:00:0c.2: enabling device (0000 -> 0002)
  244. [ 17.014083] cfg80211: Calling CRDA to update world regulatory domain
  245. [ 17.060114] lib80211: common routines for IEEE802.11 drivers
  246. [ 17.065800] lib80211_crypt: registered algorithm 'NULL'
  247. [ 17.346853] input: OLPC HGPK ALPS HGPK as /devices/platform/i8042/serio1/input/input4
  248. [ 17.430608] mousedev: PS/2 mouse device common for all mice
  249. [ 17.460625] usbcore: registered new interface driver usb8xxx
  250. [ 18.474179] ov7670 1-0021: chip found @ 0x42 (cafe_ccic)
  251. [ 18.659995] cfg80211: World regulatory domain updated:
  252. [ 18.670273] cafe1000-ccic 0000:00:0c.2: Release, 0 frames, 0 singles, 0 delivered
  253. [ 18.722036] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  254. [ 18.763554] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  255. [ 18.802262] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  256. [ 18.835632] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  257. [ 18.882737] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  258. [ 18.919051] usb8xxx: Firmware ready event received
  259. [ 18.925485] usb8xxx 1-1:1.0: (unregistered net_device): 00:17:c4:42:ba:a2, fw 5.110.22p23, cap 0x000003a3
  260. [ 18.940108] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  261. [ 18.978287] usb8xxx 1-1:1.0: wlan0: Marvell WLAN 802.11 adapter
  262. [ 18.988232] cfg80211: Calling CRDA for country: EU
  263. [ 19.049011] usb8xxx 1-1:1.0: wlan0: PREP_CMD: command 0x0074 failed: 2
  264. [ 19.078135] usb8xxx 1-1:1.0: wlan0: Firmware does not seem to support PS mode
  265. [ 19.130106] usb8xxx 1-1:1.0: wlan0: PREP_CMD: command 0x0043 failed: 1
  266. [ 19.136667] usb8xxx 1-1:1.0: wlan0: HOST_SLEEP_CFG failed 1
  267. [ 19.580650] udevd[182]: renamed network interface wlan0 to eth0
  268. [ 20.044793] usbcore: registered new interface driver sisusb
  269. [ 20.084979] usbcore: registered new interface driver udlfb
  270. [ 20.217122] usbcore: deregistering interface driver udlfb
  271. [ 21.648177] input: olpc-kbdshim virtual input as /devices/virtual/input/input5
  272. [ 23.470967] dcon_freeze_store: 1
  273. [ 23.474243] dcon_source_switch to DCON
  274. [ 23.510739] olpc-dcon: The DCON has control
  275. [ 24.000138] ip_tables: (C) 2000-2006 Netfilter Core Team
  276. [ 30.222282] ADDRCONF(NETDEV_UP): eth0: link is not ready
  277. [ 34.500138] fuse init (API version 7.18)
  278. [ 35.992353] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  279. [ 46.410086] eth0: no IPv6 routers present
  280. [ 58.913867] dcon_freeze_store: 0
  281. [ 58.917139] dcon_source_switch to CPU
  282. [ 58.942673] olpc-dcon: The CPU has control
  283. [ 61.545212] dcon_freeze_store: 0
  284. [ 235.630088] usb 2-2: new full-speed USB device number 2 using ohci_hcd
  285. [ 235.925584] usbcore: registered new interface driver usbhid
  286. [ 235.953665] usbhid: USB HID core driver
  287. [ 392.102566] usb 2-2: USB disconnect, device number 2
  288. [ 1004.640092] usb 2-2: new full-speed USB device number 3 using ohci_hcd
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement