API tools faq
paste
Advertisement
CGarces

dmesg openwrt

CGarces
May 27th, 2019
510
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.65 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.9.152 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7627-753531d) ) #0 Mon Jan 28 08:54:32 2019
  2. [ 0.000000] SoC: Danube rev 1.5
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
  5. [ 0.000000] MIPS: machine is SMC7908A-ISP, Airties WAV-221
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] On node 0 totalpages: 16384
  18. [ 0.000000] free_area_init_node: node 0, pgdat 804556e4, node_mem_map 81006d20
  19. [ 0.000000] Normal zone: 128 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  25. [ 0.000000] Kernel command line: console=ttyLTQ0,115200
  26. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Writing ErrCtl register=00046af8
  30. [ 0.000000] Readback ErrCtl register=00046af8
  31. [ 0.000000] Memory: 54308K/65536K available (3697K kernel code, 162K rwdata, 572K rodata, 5920K init, 210K bss, 11228K reserved, 0K cma-reserved)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:256
  34. [ 0.000000] CPU Clock: 333MHz
  35. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
  36. [ 0.000020] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
  37. [ 0.007962] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
  38. [ 0.050610] pid_max: default: 32768 minimum: 301
  39. [ 0.055589] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. [ 0.062130] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.078901] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  42. [ 0.088591] futex hash table entries: 256 (order: -1, 3072 bytes)
  43. [ 0.094860] pinctrl core: initialized pinctrl subsystem
  44. [ 0.102536] NET: Registered protocol family 16
  45. [ 0.114782] pinctrl-xway 1e100b10.pinmux: Init done
  46. [ 0.121312] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
  47. [ 0.182078] Can't analyze schedule() prologue at 80399f80
  48. [ 0.188815] PCI host bridge /fpi@10000000/pci@E105400 ranges:
  49. [ 0.194520] MEM 0x0000000018000000..0x0000000019ffffff
  50. [ 0.199794] IO 0x000000001ae00000..0x000000001affffff
  51. [ 0.254319] usbcore: registered new interface driver usbfs
  52. [ 0.259952] usbcore: registered new interface driver hub
  53. [ 0.265371] usbcore: registered new device driver usb
  54. [ 0.270987] PCI host bridge to bus 0000:00
  55. [ 0.275037] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
  56. [ 0.281960] pci_bus 0000:00: root bus resource [io 0x1ae00000-0x1affffff]
  57. [ 0.288902] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  58. [ 0.295757] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  59. [ 0.303835] pci 0000:00:0e.0: [168c:ff1a] type 00 class 0x020000
  60. [ 0.303906] pci 0000:00:0e.0: reg 0x10: [mem 0x00000000-0x0000ffff]
  61. [ 0.304052] pci 0000:00:0e.0: supports D2
  62. [ 0.304073] pci 0000:00:0e.0: PME# supported from D3cold
  63. [ 0.304531] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  64. [ 0.304596] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
  65. [ 0.321128] clocksource: Switched to clocksource MIPS
  66. [ 0.328651] NET: Registered protocol family 2
  67. [ 0.334862] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  68. [ 0.341831] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  69. [ 0.348217] TCP: Hash tables configured (established 1024 bind 1024)
  70. [ 0.354803] UDP hash table entries: 256 (order: 0, 4096 bytes)
  71. [ 0.360625] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  72. [ 0.367378] NET: Registered protocol family 1
  73. [ 0.371797] PCI: CLS 0 bytes, default 32
  74. [ 0.763314] gptu: totally 6 16-bit timers/counters
  75. [ 0.768290] gptu: misc_register on minor 63
  76. [ 0.772429] gptu: succeeded to request irq 126
  77. [ 0.776932] gptu: succeeded to request irq 127
  78. [ 0.781448] gptu: succeeded to request irq 128
  79. [ 0.785959] gptu: succeeded to request irq 129
  80. [ 0.790472] gptu: succeeded to request irq 130
  81. [ 0.794987] gptu: succeeded to request irq 131
  82. [ 0.806272] lantiq,vmmc 1f103000.vmmc: requested GPIO 511
  83. [ 0.811632] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
  84. [ 0.819291] Crashlog allocated RAM at address 0x3f00000
  85. [ 0.828287] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  86. [ 0.850739] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  87. [ 0.856512] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  88. [ 1.025904] io scheduler noop registered
  89. [ 1.029767] io scheduler deadline registered (default)
  90. [ 1.035866] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
  91. [ 1.044832] console [ttyLTQ0] enabled
  92. [ 1.051936] bootconsole [early0] disabled
  93. [ 1.061418] lantiq nor flash device: 02000000 at 10000000
  94. [ 1.065653] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022a8
  95. [ 1.074676] ltq_nor: Found an alias at 0x400000 for the chip at 0x0
  96. [ 1.074717] ltq_nor: Found an alias at 0x800000 for the chip at 0x0
  97. [ 1.074754] ltq_nor: Found an alias at 0xc00000 for the chip at 0x0
  98. [ 1.074919] Amd/Fujitsu Extended Query Table at 0x0040
  99. [ 1.079654] Amd/Fujitsu Extended Query version 1.1.
  100. [ 1.084518] number of CFI chips: 1
  101. [ 1.087870] 4 fixed-partitions partitions found on MTD device ltq_nor
  102. [ 1.094064] Creating 4 MTD partitions on "ltq_nor":
  103. [ 1.098803] 0x000000000000-0x000000010000 : "uboot"
  104. [ 1.110091] 0x000000010000-0x000000020000 : "uboot_env"
  105. [ 1.117834] 0x000000020000-0x0000003f0000 : "firmware"
  106. [ 1.145157] random: fast init done
  107. [ 1.171086] 0x0000003f0000-0x000000400000 : "boardconfig"
  108. [ 1.181031] libphy: Fixed MDIO Bus: probed
  109. [ 1.388147] libphy: ltq_mii: probed
  110. [ 1.491399] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
  111. [ 1.497216] Realtek RTL8306S 1e180000.etop-ffffffff:00: attached PHY driver [Realtek RTL8306S] (mii_bus:phy_addr=1e180000.etop-ffffffff:00, irq=-1)
  112. [ 1.512040] wdt 1f8803f0.watchdog: Init done
  113. [ 1.521278] NET: Registered protocol family 10
  114. [ 1.536776] NET: Registered protocol family 17
  115. [ 1.539899] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  116. [ 1.552371] 8021q: 802.1Q VLAN Support v1.8
  117. [ 1.562347] ath5k,eeprom 10000000.fpi:localbus@0:ath5k_eep: loaded ath5k eeprom
  118. [ 1.572217] OF: fdt:not creating '/sys/firmware/fdt': CRC check failed
  119. [ 1.614377] Freeing unused kernel memory: 5920K
  120. [ 1.617473] This architecture does not have kernel memory protection.
  121. [ 1.651704] init: Console is alive
  122. [ 1.654201] init: - watchdog -
  123. [ 1.684414] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  124. [ 1.695965] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  125. [ 1.712456] init: - preinit -
  126. [ 1.959355] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  127. [ 2.981322] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  128. [ 5.219138] procd: - early -
  129. [ 5.220799] procd: - watchdog -
  130. [ 5.821214] procd: - watchdog -
  131. [ 5.823699] procd: - ubus -
  132. [ 5.839402] random: ubusd: uninitialized urandom read (4 bytes read)
  133. [ 5.876954] random: ubusd: uninitialized urandom read (4 bytes read)
  134. [ 5.882711] random: ubusd: uninitialized urandom read (4 bytes read)
  135. [ 5.891222] procd: - init -
  136. [ 6.233640] kmodloader: loading kernel modules from /etc/modules.d/*
  137. [ 6.245524] ip6_tables: (C) 2000-2006 Netfilter Core Team
  138. [ 6.271022] ip_tables: (C) 2000-2006 Netfilter Core Team
  139. [ 6.287917] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  140. [ 6.375651] xt_time: kernel timezone is -0000
  141. [ 6.394486] PPP generic driver version 2.4.2
  142. [ 6.402367] NET: Registered protocol family 24
  143. [ 6.411841] kmodloader: done loading kernel modules from /etc/modules.d/*
  144. [ 7.822308] urandom_read: 5 callbacks suppressed
  145. [ 7.822323] random: jshn: uninitialized urandom read (4 bytes read)
  146. [ 7.934397] random: jshn: uninitialized urandom read (4 bytes read)
  147. [ 22.719887] br-lan: port 1(eth0) entered blocking state
  148. [ 22.723692] br-lan: port 1(eth0) entered disabled state
  149. [ 22.729556] device eth0 entered promiscuous mode
  150. [ 22.801563] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  151. [ 23.717386] br-lan: port 1(eth0) entered blocking state
  152. [ 23.721093] br-lan: port 1(eth0) entered forwarding state
  153. [ 23.753275] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  154. [ 51.405256] random: crng init done
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!