Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- admin@Synology:~$
- Broadcast message from root@Synology
- (unknown) at 21:24 ...
- The system is going down for reboot NOW!
- [10188.942066] init: synonetd main process (1590) killed by TERM signal
- [10188.975857] init: synostoraged main process (5448) terminated with status 15
- [10188.999510] init: hotplugd main process (6379) killed by TERM signal
- [10189.029313] init: smbd main process (6954) killed by TERM signal
- System is going to reboot.
- [10195.623783] usbcore: deregistering interface driver snd-usb-hiface
- [10195.800252] usbcore: deregistering interface driver snd-usb-audio
- [10196.473479] init: pkg-AudioStation-pgbouncer main process (9777) terminated with status 1
- [10215.319625] init: pkg-SynologyApplicationService-notification_send main process (9672) killed by TERM signal
- [10216.419700] init: pkg-SynologyApplicationService-pgbouncer main process (9747) terminated with status 1
- [10217.481074] init: pkg-SynologyApplicationService-VapidSendServer main process (9785) killed by TERM signal
- [10224.666519] init: synoscheduler-vmtouch main process (8343) killed by TERM signal
- [10224.691696] init: mkdhparam main process (7930) killed by TERM signal
- [10224.863915] init: Disconnected from D-Bus system bus
- [10228.765966] EXT4-fs (dm-0): re-mounted. Opts: (null)
- logout
- [10228.809729] init: skip respawn tty during shutdown
- [10229.155033] init: skip respawn syslog-ng during shutdown
- [10230.411143] md2: detected capacity change from 495160786944 to 0
- [10230.417178] md: md2: set sdb5 to auto_remap [0]
- [10230.421731] md: md2: set sda5 to auto_remap [0]
- [10230.426274] md: md2 stopped.
- [10230.429186] md: unbind<sdb5>
- [10230.471029] md: export_rdev(sdb5)
- [10230.474369] md: unbind<sda5>
- [10230.501057] md: export_rdev(sda5)
- [10232.094925] md: md0 in immediate safe mode
- [10232.099398] md: md1 in immediate safe mode
- [10232.106635] init: dhcp-client (eth0) main process (14595) killed by KILL signal
- [10232.131619] init: dhcp-client (eth1) main process (13593) killed by KILL signal
- [10233.221438] EXT4-fs (md0): re-mounted. Opts: (null)
- [10234.379468] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
- [10234.384842] sd 1:0:0:0: [sdb] Stopping disk
- [10235.261210] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [10235.281201] sd 0:0:0:0: [sda] Stopping disk
- [10236.181716] Shutting Down Marvell Ethernet Driver
- [10236.186456] Disabling non-boot CPUs ...
- [10236.190943] CPU1: shutdown
- [10236.194669] Restarting system.
- BootROM 1.20
- Booting from SPI flash
- High speed PHY - Version: 2.1.2 (COM-PHY-V20)
- Update PEX Device ID 0x78230
- High speed PHY - Ended Successfully
- DDR3 Training Sequence - Ver 4.5.0
- DDR3 Training Sequence - Ended Successfully
- Status = MV_OK
- BootROM: Image checksum verification PASSED
- __ __ _ _
- | \/ | __ _ _ ____ _____| | |
- | |\/| |/ _` | '__\ \ / / _ \ | |
- | | | | (_| | | \ V / __/ | |
- |_| |_|\__,_|_| \_/ \___|_|_|
- _ _ ____ _
- | | | | | __ ) ___ ___ | |_
- | | | |___| _ \ / _ \ / _ \| __|
- | |_| |___| |_) | (_) | (_) | |_
- \___/ |____/ \___/ \___/ \__|
- ** LOADER **
- U-Boot 2011.12-SYNO-d7bdf8d-2013-12-11 (Dec 11 2013 - 17:58:54) Marvell version: v2011.12 2013_Q1.2
- Board: Synology AXP 78230 4-bay/2-bay
- SoC: MV78230 B0
- running 2 CPUs
- Custom configuration
- CPU: Marvell PJ4B (584) v7 (Rev 2) LE
- CPU 0
- CPU @ 1333 [MHz]
- L2 @ 667 [MHz]
- TClock @ 250 [MHz]
- DDR @ 667 [MHz]
- DDR 32Bit Width, FastPath Memory Access
- DDR ECC Disabled
- DRAM: 1 GiB
- Map: Code: 0x3fefb000:0x3ff9f630
- BSS: 0x3ffef33c
- Stack: 0x3f9eaef8
- Heap: 0x3f9eb000:0x3fefb000
- MMC: MRVL_MMC: 0
- SF: Detected M25P64 with page size 64 KiB, total 8 MiB
- *** Warning - bad CRC, using default environment
- PEX 0.0(0): Root Complex Interface, Detected Link X4, GEN 1.1
- PEX 1.0(1): Root Complex Interface, Detected Link X1, GEN 2.0
- PEX 1.1(2): Detected No Link.
- PEX 1.2(3): Detected No Link.
- FPU initialized to Run Fast Mode.
- USB 0: Host Mode
- USB 1: Host Mode
- USB 2: Device Mode
- Modules Detected:
- Synology Model: DS414r1
- Fan Status: Not Good
- Fan 1: Not Good
- Fan 2: Not Good
- Net: egiga0 [PRIME], egiga1
- Press Ctrl+C to abort autoboot in 3 second
- ## Booting kernel from Legacy Image at f40d0000 ...
- Image Name: Linux-3.2.40
- Created: 2020-04-14 6:26:32 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2125176 Bytes = 2 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at f43a0000 ...
- Image Name: synology_armadaxp_ds414 25423
- Created: 2020-04-14 7:59:00 UTC
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 3560681 Bytes = 3.4 MiB
- Load Address: 08000000
- Entry Point: 08000000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Linux version 3.2.40 (root@build2) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25423 SMP Tue Apr 14 14:26:16 CST 2020
- [ 0.000000] CPU: Marvell PJ4Bv7 Processor [562f5842] revision 2 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] Machine: Marvell Armada XP Development Board
- [ 0.000000] Using UBoot passing parameters structure
- [ 0.000000] Reserving training memory: base=0x (null) size=0x2800
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] SMP: init cpus
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @80dd2000 s5216 r8192 d15264 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
- [ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1
- [ 0.000000] Synology Hardware Version: DS414r1-j
- [ 0.000000] Internal HD num: 4
- [ 0.000000] Internal netif num: 2
- [ 0.000000] Special Sata LEDs.
- [ 0.000000] Support HDD Hotplug.
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1024MB = 1024MB total
- [ 0.000000] Memory: 1025304k/1025304k available, 23272k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xc0800000 - 0xfa800000 ( 928 MB)
- [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
- [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
- [ 0.000000] .text : 0x80008000 - 0x80514000 (5168 kB)
- [ 0.000000] .init : 0x80514000 - 0x80545460 ( 198 kB)
- [ 0.000000] .data : 0x80546000 - 0x8056cee0 ( 156 kB)
- [ 0.000000] .bss : 0x8056cf04 - 0x805cbbcc ( 380 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:211
- [ 0.000000] Initializing ArmadaXP SOC Timer 0
- [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
- [ 146.135620] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
- [ 146.225541] pid_max: default: 32768 minimum: 301
- [ 146.225666] Security Framework initialized
- [ 146.225693] AppArmor: AppArmor initialized
- [ 146.225753] Mount-cache hash table entries: 512
- [ 146.226163] CPU: Testing write buffer coherency: ok
- [ 146.226287] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 146.226300] SMP: prepare CPUs (4 cores)
- [ 146.226481] Setting Clocks for secondary CPUs
- [ 146.227269] SMP: CPU 0 Waking up CPU 1
- [ 146.232093] CPU1: Booted secondary processor
- [ 146.265530] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 146.265582] Brought up 2 CPUs
- [ 146.265595] SMP: Total of 2 processors activated (2664.03 BogoMIPS).
- [ 146.266210] devtmpfs: initialized
- [ 146.269821] xor: measuring software checksum speed
- [ 146.315500] arm4regs : 1292.000 MB/sec
- [ 146.365493] 8regs : 963.600 MB/sec
- [ 146.415494] 32regs : 1114.800 MB/sec
- [ 146.415502] xor: using function: arm4regs (1292.000 MB/sec)
- [ 146.415667] NET: Registered protocol family 16
- [ 146.417953] L0 cache Enabled
- [ 146.417963] Speculative Prefetch Disabled
- [ 146.417983] Aurora L2 Cache Enabled
- [ 146.418162] Support IO coherency.
- [ 146.521496]
- [ 146.521502] Marvell Armada-XP Synology AXP 78230 Board - Soc: MV78230 B0 LE
- [ 146.521519] Detected Tclk 250000000, SysClk 667000000, FabricClk 667000000, PClk 1333000000
- [ 146.521528] LSP version: linux-3.2.y-2013_Q1.2p2
- [ 146.521533]
- [ 146.522765] Synology ArmadaXP 4-bay GPIO Init
- [ 146.523221] registered dev#0 asa ehci_marvell
- [ 146.523532] Marvell USB EHCI Host controller #0: bf8aaa00
- [ 146.523638] registered dev#1 asa ehci_marvell
- [ 146.523944] Marvell USB EHCI Host controller #1: bf8aa800
- [ 146.524053] registered dev#2 asa mv_udc
- [ 146.524359] Marvell USB Gadget controller #2: bf8aa600
- [ 146.532181] bio: create slab <bio-0> at 0
- [ 146.695708] raid6: int32x1 162 MB/s
- [ 146.865582] raid6: int32x2 246 MB/s
- [ 147.035620] raid6: int32x4 303 MB/s
- [ 147.205618] raid6: int32x8 325 MB/s
- [ 147.205625] raid6: using algorithm int32x8 (325 MB/s)
- [ 147.206147] SCSI subsystem initialized
- [ 147.207360] Switching to clocksource axp_clocksource
- [ 147.207619] AppArmor: AppArmor Filesystem Enabled
- [ 147.209362] NET: Registered protocol family 2
- [ 147.209458] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 147.209707] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 147.210713] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 147.211117] TCP: Hash tables configured (established 131072 bind 65536)
- [ 147.211126] TCP reno registered
- [ 147.211135] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 147.211164] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 147.211294] NET: Registered protocol family 1
- [ 147.211462] RPC: Registered named UNIX socket transport module.
- [ 147.211471] RPC: Registered udp transport module.
- [ 147.211478] RPC: Registered tcp transport module.
- [ 147.211484] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 147.211647] Trying to unpack rootfs image as initramfs...
- [ 149.065652] rootfs image is not initramfs (no cpio magic); looks like an initrd
- [ 149.079625] Freeing initrd memory: 8192K
- [ 149.079728] PCI-E: Cheking physical bus #0 (controller #0): Enabled - Link UP
- [ 149.079919] PCI-E: Cheking physical bus #1 (controller #4): Enabled - Link UP
- [ 149.080090] PCI-E: Cheking physical bus #2 (controller #5): Enabled - No Link
- [ 149.080256] PCI-E: Cheking physical bus #3 (controller #6): Enabled - No Link
- [ 149.081044] PCI: bus0: Fast back to back transfers disabled
- [ 149.081626] PCI: bus1: Fast back to back transfers disabled
- [ 149.081838] pci 0000:01:00.0: BAR 0: assigned [mem 0xf2800000-0xf2807fff 64bit]
- [ 149.081856] pci 0000:01:00.0: BAR 0: set to [mem 0xf2800000-0xf2807fff 64bit] (PCI address [0xf2800000-0xf2807fff])
- [ 149.081871] pci 0000:00:00.0: BAR 0: assigned [mem 0xf2000000-0xf20fffff 64bit]
- [ 149.081886] pci 0000:00:00.0: BAR 0: set to [mem 0xf2000000-0xf20fffff 64bit] (PCI address [0xf2000000-0xf20fffff])
- [ 149.081897] pci 0000:00:00.0: BAR 2: can't assign io (size 0x100)
- [ 149.082289] cesadev_init(8051cdb0)
- [ 149.082852] Armada XP hwmon thermal sensor initialized.
- [ 149.082942] ArmadaXP Power Managament Suspend Operations Initialized
- [ 149.082950] Initializing Armada-XP CPU power management (WFI)
- [ 149.083566] audit: initializing netlink socket (disabled)
- [ 149.083596] type=2000 audit(2.940:1): initialized
- [ 149.084046] VFS: Disk quotas dquot_6.5.2
- [ 149.084112] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 149.084765] msgmni has been set to 2018
- [ 149.085585] async_tx: api initialized (async)
- [ 149.085727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 149.085737] io scheduler noop registered
- [ 149.085783] io scheduler cfq registered (default)
- [ 149.085846] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
- [ 149.085879] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
- [ 149.117416] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
- [ 149.157411] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
- [ 149.177414] mv_xor mv_xor.2: Marvell XOR: ( xor )
- [ 149.197409] mv_xor mv_xor.3: Marvell XOR: ( fill cpy )
- [ 149.197840] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 149.257586] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 41) is a 16550A
- [ 149.963580] console [ttyS0] enabled
- [ 149.997553] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 42) is a 16550A
- [ 150.043363] brd: module loaded
- [ 150.046428] Loading iSCSI transport class v2.0-870.
- [ 150.052269] sata_mv 0000:00:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
- [ 150.062012] scsi0 : sata_mv
- [ 150.065191] scsi1 : sata_mv
- [ 150.068328] scsi2 : sata_mv
- [ 150.071451] scsi3 : sata_mv
- [ 150.074544] ata1: SATA max UDMA/133 mmio m1048576@0xf2000000 port 0xf2022000 irq 58
- [ 150.082247] ata2: SATA max UDMA/133 mmio m1048576@0xf2000000 port 0xf2024000 irq 58
- [ 150.089933] ata3: SATA max UDMA/133 mmio m1048576@0xf2000000 port 0xf2026000 irq 58
- [ 150.097618] ata4: SATA max UDMA/133 mmio m1048576@0xf2000000 port 0xf2028000 irq 58
- [ 158.647397] ata1: link is slow to respond, please be patient (ready=0)
- [ 161.107422] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 161.127806] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
- [ 161.133834] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 161.157777] ata1.00: configured for UDMA/133
- [ 161.177697] scsi 0:0:0:0: Direct-Access SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
- [ 161.187059] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 161.194719] sd 0:0:0:0: [sda] Write Protect is off
- [ 161.199605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 161.226442] sda: sda1 sda2 sda3 < sda5 >
- [ 161.231684] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 164.185815] Delay 5 seconds to wait for disk 2 ready.
- [ 174.737396] ata2: link is slow to respond, please be patient (ready=0)
- [ 176.957419] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 176.977794] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
- [ 176.983820] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 177.007783] ata2.00: configured for UDMA/133
- [ 177.027635] scsi 1:0:0:0: Direct-Access SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
- [ 177.037004] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 177.044687] sd 1:0:0:0: [sdb] Write Protect is off
- [ 177.049586] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 177.076774] sdb: sdb1 sdb2 sdb3 < sdb5 >
- [ 177.082006] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 177.387415] ata3: SATA link down (SStatus 0 SControl 300)
- [ 177.737413] ata4: SATA link down (SStatus 0 SControl 300)
- [ 177.743046] sata_mv sata_mv.0: cannot get clkdev
- [ 177.747769] sata_mv sata_mv.0: slots 32 ports 2
- [ 177.753441] scsi4 : sata_mv
- [ 177.756564] scsi5 : sata_mv
- [ 177.759661] ata5: SATA max UDMA/133 irq 55
- [ 177.763772] ata6: SATA max UDMA/133 irq 55
- [ 178.117403] ata5: SATA link down (SStatus 0 SControl F300)
- [ 179.187400] ata6: failed to resume link (SControl 4)
- [ 179.192389] ata6: SATA link down (SStatus 0 SControl 4)
- [ 179.198571] physmap platform flash device: 00800000 at f0000000
- [ 179.207421] SPI Serial flash detected @ 0xf0000000, 8192KB (128sec x 64KB)
- [ 179.214337] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x7f0000
- [ 179.259556] 6 RedBoot partitions found on MTD device SYNOMTD-0
- [ 179.265406] SYNOMTD flash bank 0: Using RedBoot partition definition
- [ 179.271785] Creating 6 MTD partitions on "SYNOMTD-0":
- [ 179.276857] 0x000000000000-0x0000000d0000 : "RedBoot"
- [ 179.282741] 0x0000000d0000-0x0000003a0000 : "zImage"
- [ 179.288499] 0x0000003a0000-0x0000007d0000 : "rd.gz"
- [ 179.294179] 0x0000007d0000-0x0000007e0000 : "vendor"
- [ 179.299251] vender Mac0 address : 00:11:32:3a:b5:bf
- [ 179.304146] vender Mac1 address : 00:11:32:3a:b5:c0
- [ 179.309046] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
- [ 179.314895] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
- [ 179.320753] serial number='14B0MEN514301'
- [ 179.325392] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
- [ 179.332060] 0x0000007f0000-0x000000800000 : "FIS directory"
- [ 179.338527] mv_eth_probe: port_mask=0xf, cpu_mask=0x3
- [ 179.343875] o 4 Giga ports supported
- [ 179.347665] o SKB recycle supported (Enabled)
- [ 179.352209] o NETA acceleration mode 2
- [ 179.356142] o BM supported for CPU: 4 BM pools
- [ 179.360779] o RX Queue support: 1 Queues * 128 Descriptors
- [ 179.366455] o TX Queue support: 1 Queues * 532 Descriptors
- [ 179.372134] o GSO supported
- [ 179.375109] o GRO supported
- [ 179.378090] o Receive checksum offload supported
- [ 179.382893] o Transmit checksum offload supported
- [ 179.387792] o Driver ERROR statistics enabled
- [ 179.392334]
- [ 179.394006] o Loading network interface(s)
- [ 179.398300]
- [ 179.399796] o Port 0 is connected to Linux netdevice
- [ 179.405349] giga p=0: mtu=1500, mac=bf835e44
- [ 179.413588] o eth0, ifindex = 2, GbE port = 0
- [ 179.418166] o eth0, phy chipid = 1410dd0, Support WOL = 32
- [ 179.424199]
- [ 179.425702]
- [ 179.427197] o Port 1 is connected to Linux netdevice
- [ 179.432754] giga p=1: mtu=1500, mac=bf835e44
- [ 179.440957] o eth1, ifindex = 3, GbE port = 1
- [ 179.445503] o eth1, phy chipid = 1410dd0, Support WOL = 32
- [ 179.451575]
- [ 179.453073]
- [ 179.453075] o Warning: GbE port 2 is powered off
- [ 179.453079]
- [ 179.460869]
- [ 179.462586] i2c /dev entries driver
- [ 179.466606] Syno_HddMon: Initialization completed.
- [ 179.471429] md: linear personality registered for level -1
- [ 179.476931] md: raid0 personality registered for level 0
- [ 179.482264] md: raid1 personality registered for level 1
- [ 179.487596] md: raid10 personality registered for level 10
- [ 179.493098] md: raid6 personality registered for level 6
- [ 179.498429] md: raid5 personality registered for level 5
- [ 179.503755] md: raid4 personality registered for level 4
- [ 179.509388] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 179.518043] cpuidle: using governor ladder
- [ 179.522482] cpuidle: using governor menu
- [ 179.526544] TCP cubic registered
- [ 179.529793] NET: Registered protocol family 17
- [ 179.534278] Registering the dns_resolver key type
- [ 179.539113] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
- [ 179.547268] registered taskstats version 1
- [ 179.551677] md: Waiting for all devices to be available before autodetect
- [ 179.558494] md: If you don't use raid, use raid=noautodetect
- [ 179.564675] md: Autodetecting RAID arrays.
- [ 179.609226] md: invalid raid superblock magic on sda5
- [ 179.614295] md: sda5 does not have a valid v0.90 superblock, not importing!
- [ 179.667951] md: invalid raid superblock magic on sdb5
- [ 179.673019] md: sdb5 does not have a valid v0.90 superblock, not importing!
- [ 179.680024] md: Scanned 6 and added 4 devices.
- [ 179.684481] md: autorun ...
- [ 179.687282] md: considering sda1 ...
- [ 179.690892] md: adding sda1 ...
- [ 179.694138] md: sda2 has different UUID to sda1
- [ 179.698701] md: adding sdb1 ...
- [ 179.701946] md: sdb2 has different UUID to sda1
- [ 179.706510] md: created md0
- [ 179.709319] md: bind<sdb1>
- [ 179.712065] md: bind<sda1>
- [ 179.714805] md: running: <sda1><sdb1>
- [ 179.718726] bio: create slab <bio-1> at 1
- [ 179.722880] md/raid1:md0: active with 2 out of 4 mirrors
- [ 179.787446] md0: detected capacity change from 0 to 2549940224
- [ 179.793390] md: considering sda2 ...
- [ 179.796991] md: adding sda2 ...
- [ 179.800250] md: adding sdb2 ...
- [ 179.803974] md: created md1
- [ 179.806778] md: bind<sdb2>
- [ 179.809531] md: bind<sda2>
- [ 179.812275] md: running: <sda2><sdb2>
- [ 179.816268] md/raid1:md1: active with 2 out of 4 mirrors
- [ 179.857490] md1: detected capacity change from 0 to 2147418112
- [ 179.863430] md: ... autorun DONE.
- [ 179.866845] RAMDISK: lzma image found at block 0
- [ 181.836151] VFS: Mounted root (ext2 filesystem) on device 1:0.
- START /linuxrc.syno
- Insert basic USB modules...
- :: Loading module usb-common ... [ OK ]
- :: Loading module usbcore[ 182.023862] usbcore: registered new interface driver usbfs
- [ 182.032630] usbcore: registered new interface driver hub
- [ 182.045747] usbcore: registered new interface driver ethub
- [ 182.061408] usbcore: registered new device driver usb
- ... [ OK ]
- :: Loading module ehci-hcd[ 182.115830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 182.122491] ehci_marvell ehci_marvell.0: Marvell Orion EHCI
- [ 182.128185] ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1
- [ 182.157410] ehci_marvell ehci_marvell.0: irq 45, io base 0xfbc50100
- [ 182.177456] ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00
- [ 182.184542] hub 1-0:1.0: USB hub found
- [ 182.188332] hub 1-0:1.0: 1 port detected
- [ 182.194884] ehci_marvell ehci_marvell.1: Marvell Orion EHCI
- [ 182.200541] ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 2
- [ 182.237441] ehci_marvell ehci_marvell.1: irq 46, io base 0xfbc51100
- [ 182.257408] ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00
- [ 182.264532] hub 2-0:1.0: USB hub found
- [ 182.268381] hub 2-0:1.0: 1 port detected
- ... [ OK ]
- :: Loading module xhci-hcd ... [ OK ]
- [ 182.401417] etxhci_hcd-161118 0000:01:00.0: Etron xHCI Host Controller
- [ 182.408066] etxhci_hcd-161118 0000:01:00.0: new USB bus registered, assigned bus number 3
- [ 182.425371] etxhci_hcd-161118 0000:01:00.0: Etron chip found.
- [ 182.431262] etxhci_hcd-161118 0000:01:00.0: irq 62, io mem 0xf2800000
- [ 182.439065] ethub 3-0:1.0: USB hub found
- [ 182.443020] ethub 3-0:1.0: 2 ports detected
- [ 182.449888] etxhci_hcd-161118 0000:01:00.0: Etron xHCI Host Controller
- [ 182.456468] etxhci_hcd-161118 0000:01:00.0: new USB bus registered, assigned bus number 4
- [ 182.477619] ethub 4-0:1.0: USB hub found
- [ 182.481578] ethub 4-0:1.0: 2 ports detected
- Insert net driver(Mindspeed only)...
- [ 182.528809] ds414_synobios: module license 'Synology Inc.' taints kernel.
- [ 182.535626] Disabling lock debugging due to kernel taint
- [ 182.549131] correction with 0x03
- [ 182.555705] 2020-4-15 20:26:42 UTC
- [ 182.559177] synobios: load, major number 201
- [ 182.563465] Brand: Synology
- [ 182.566289] Model: DS-414
- [ 182.568943] This is default settings: set group disks wakeup number to 1, spinup time deno 1
- [ 182.577439] synobios cpu_arch proc entry initialized
- [ 182.582419] synobios crypto_hw proc entry initialized
- [ 182.587497] synobios syno_platform proc entry initialized
- [ 182.593008] synobios open /dev/ttyS1 success
- Starting /usr/syno/bin/synocfgen...
- /usr/syno/bin/synocfgen returns 0
- [ 182.615401] synobios: unload
- Partition Version=8
- /sbin/e2fsck exists, checking /dev/md0...
- [ 182.697473] md0: unknown partition table
- /sbin/e2fsck -pvf returns 0
- Mounting /dev/md0 /tmpRoot
- [ 184.362325] EXT4-fs (md0): barriers disabled
- [ 184.375135] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
- ------------upgrade
- Begin upgrade procedure
- Found an upgrade file on data volume. Begin upgrade
- Checksum of system tarball verified.
- /tmpRoot//usr/syno/etc/synoservice.d ==> /tmpRoot/.syno/update_bkp//usr/syno/etc/synoservice.d/
- /tmpRoot//usr/syno/etc/timebkp ==> /tmpRoot/.syno/update_bkp//usr/syno/etc/timebkp/
- /tmpRoot//var/run ==> /tmpRoot/.syno/update_bkp//var/run/
- /tmpRoot//etc/postgresql/user.conf.d -> /tmpRoot/.upd@te_sub/etc/postgresql/user.conf.d/
- /tmpRoot//etc -> /tmpRoot/.upd@te/etc/
- /tmpRoot//usr/syno/etc -> /tmpRoot/.upd@te/usr/syno/etc/
- /tmpRoot//var -> /tmpRoot/.upd@te/var/
- /tmpRoot//usr/syno/synoman/webman/3rdparty -> /tmpRoot/.upd@te/usr/syno/synoman/webman/3rdparty/
- /tmpRoot//usr/local -> /tmpRoot/.upd@te/usr/local/
- Removing /tmpRoot/.upd@te//etc/ftpusers...
- Removing /tmpRoot/.upd@te//etc/rc...
- Removing /tmpRoot/.upd@te//etc/rc.network...
- Removing /tmpRoot/.upd@te//usr/syno/etc/rc.atalk...
- Removing /tmpRoot/.upd@te//usr/syno/etc/.htpasswd...
- Removing /tmpRoot/.upd@te//usr/syno/etc/lpd/lpd.conf...
- Removing /tmpRoot/.upd@te//usr/syno/etc/printcap...
- Removing /tmpRoot/.upd@te//usr/syno/etc/ups.conf...
- Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.conf...
- Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.users...
- Removing /tmpRoot/.upd@te//usr/syno/etc/upsmon.conf...
- Removing /tmpRoot/.upd@te//usr/syno/etc/upssched.conf...
- Removing /tmpRoot/.upd@te//etc/lvm/lvm.conf...
- Removing /tmpRoot/.upd@te//usr/local/etc/rc.d/SynoEnablePersonalServices.sh...
- Removing /tmpRoot/.upd@te//etc/rc.network_routing...
- Removing /tmpRoot/.upd@te//usr/syno/etc/rc.tun...
- Removing /tmpRoot/.upd@te//usr/syno/etc/afpd.conf...
- Removing /tmpRoot/.upd@te//etc/pam.d/samba...
- Removing /tmpRoot/.upd@te//etc/ppp/ip-up...
- Removing /tmpRoot/.upd@te//etc/ppp/ip-down...
- Removing /tmpRoot/.upd@te//etc/ppp/ip-function...
- Removing /tmpRoot/.upd@te//etc/ppp/ipv6-up...
- Removing /tmpRoot/.upd@te//etc/ppp/ipv6-down...
- Removing /tmpRoot/.upd@te//etc/ppp/options...
- Removing /tmpRoot/.upd@te//usr/local/cups/mime.types...
- Removing /tmpRoot/.upd@te//usr/local/cups/mime.convs...
- Removing /tmpRoot/.upd@te//etc/cups/cupsd.conf...
- Removing /tmpRoot/.upd@te//usr/local/cups/cupsd.conf...
- Removing /tmpRoot/.upd@te//usr/local/cups/testprint...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/bannertops...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/commandtops...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/gziptoany...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetops...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetoraster...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/pdftops...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/pstops...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertoepson...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertohp...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertolabel...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertopwg...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/texttops...
- Removing /tmpRoot/.upd@te//usr/local/cups/filter/hpgltops...
- Removing /tmpRoot/.upd@te//etc/hostapd/stainfo.sh...
- Removing /tmpRoot/.upd@te//etc/hostapd/mac_filter/mfscript.sh...
- Removing /tmpRoot/.upd@te//usr/syno/etc/rfkill.sh...
- Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_guest_net.sh...
- Removing /tmpRoot/.upd@te//etc/ld.so.preload...
- Removing /tmpRoot/.upd@te//etc/tc/default.cmd...
- Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcert.sh...
- Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcgikey.sh...
- Removing /tmpRoot/.upd@te//etc/logrotate.conf...
- Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/wcdma_list.json...
- Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/usb_modeswitch.d/*...
- Removing /tmpRoot/.upd@te//etc/php/php.ini...
- Removing /tmpRoot/.upd@te//etc/php/php-fpm.conf...
- Removing /tmpRoot/.upd@te//etc/php/conf.d/opcache.ini...
- Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/global.setting...
- Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/system.cfg...
- Removing /tmpRoot/.upd@te//usr/syno/etc/ssdp/dsm_desc.xml...
- Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_time_ctrl.sh...
- Removing /tmpRoot/.upd@te//etc/profile...
- Removing /tmpRoot/.upd@te//etc/inputrc...
- Removing /tmpRoot/.upd@te//etc/dhclient/dhclient-script...
- Removing /tmpRoot/.upd@te//etc/dhclient/ipv4/dhclient.conf...
- Removing /tmpRoot/.upd@te//etc/dhclient/ipv6/dhclient.conf...
- Removing /tmpRoot/.upd@te//usr/syno/etc/www/SSLProfile.json...
- Removing /tmpRoot/.upd@te//etc/vimrc...
- Removing /tmpRoot/.upd@te//usr/syno/etc/cacert.pem...
- Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_modules_list...
- Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_chain_list...
- Removing /tmpRoot/.upd@te//usr/local/bin/python*...
- Removing /tmpRoot/.upd@te//etc/sudoers...
- Removing /tmpRoot/.upd@te//usr/syno/etc/autoupdate.notify...
- Removing /tmpRoot/.upd@te//etc/pam.d...
- Removing /tmpRoot/.upd@te//usr/syno/etc/vfs...
- Removing /tmpRoot/.upd@te//var/run...
- Removing /tmpRoot/.upd@te//var/update...
- Removing /tmpRoot/.upd@te//var/state/ups...
- Removing /tmpRoot/.upd@te//usr/syno/etc/ups...
- Removing /tmpRoot/.upd@te//var/spool/postfix...
- Removing /tmpRoot/.upd@te//usr/local/cups/backend...
- Removing /tmpRoot/.upd@te//usr/local/cups/mime...
- Removing /tmpRoot/.upd@te//etc/fw_security/sysconf...
- Removing /tmpRoot/.upd@te//etc/init...
- Removing /tmpRoot/.upd@te//etc/logrotate.d...
- Removing /tmpRoot/.upd@te//etc/syslog-ng...
- Removing /tmpRoot/.upd@te//var/lib/dpkg...
- Removing /tmpRoot/.upd@te//etc/httpd/conf...
- Removing /tmpRoot/.upd@te//etc/postgresql...
- Removing /tmpRoot/.upd@te//etc/nginx...
- Removing /tmpRoot/.upd@te//etc/wide-dhcpv6...
- Removing /tmpRoot/.upd@te//etc/apparmor.d...
- Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d...
- Removing /tmpRoot/.upd@te//var/dynlib...
- Removing /tmpRoot/.upd@te//etc/iproute2/script...
- Removing /tmpRoot/.upd@te//etc/ssl/certs...
- Removing /tmpRoot/.upd@te//etc/dbus-1...
- Removing /tmpRoot/.upd@te//usr/syno/etc/dbus-1...
- Removing /tmpRoot/.upd@te//etc/avahi...
- Removing /tmpRoot/.upd@te//usr/syno/etc/synovpnclient/scripts...
- Removing /tmpRoot/.upd@te//var/lib/apparmor...
- Removing /tmpRoot/.upd@te//usr/syno/etc/www/app.d...
- Removing /tmpRoot/.upd@te//usr/syno/etc/rc.d...
- Removing /tmpRoot/.upd@te//usr/syno/etc/bluetooth/...
- Removing /tmpRoot/.upd@te//usr/syno/etc/smallupdate_patch...
- Removing /tmpRoot/.upd@te//etc/ImageMagick-6...
- Removing /tmpRoot/.upd@te//usr/syno/etc/logcollector...
- Removing /tmpRoot/.upd@te//var/cache/texts...
- chmod: /tmpRoot/.upd@te/root: No such file or directory
- [ 200.465443] md1: unknown partition table
- Setting up swapspace version 1, size = 2147414016 bytes
- [ 200.532060] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
- Untaring /tmpRoot/.SynoUpgrade.tar...
- temporarily remove +a flag from files in backup dir:
- restore +a attribute after config restored:
- [ 217.660599] correction with 0x03
- [ 217.665742] 2020-4-15 20:27:17 UTC
- [ 217.669178] synobios: load, major number 201
- [ 217.673470] Brand: Synology
- [ 217.676296] Model: DS-414
- [ 217.678945] This is default settings: set group disks wakeup number to 1, spinup time deno 1
- [ 217.687437] synobios cpu_arch proc entry initialized
- [ 217.692417] synobios crypto_hw proc entry initialized
- [ 217.697489] synobios syno_platform proc entry initialized
- [ 217.702998] synobios open /dev/ttyS1 success
- mknod: /dev/synobios: File exists
- Starting /usr/syno/bin/synohdcfgen...
- /usr/syno/bin/synohdcfgen returns 0
- [ 217.727880] synobios: unload
- End upgrade procedure
- ============upgrade
- ls: /tmpRoot/usr/share/init/root-file-system.override: No such file or directory
- ls: /tmpRoot/usr/share/init/hostname.override: No such file or directory
- ls: /tmpRoot/usr/share/init/syslog-ng.override: No such file or directory
- ls: /tmpRoot/usr/share/init/dsmupdate.override: No such file or directory
- ls: /tmpRoot/usr/share/init/smallupdate.override: No such file or directory
- ls: /tmpRoot/usr/share/init/rc.override: No such file or directory
- Wait 2 seconds for synology manufactory device
- Wed Apr 15 20:27:20 UTC 2020
- /dev/md0 /tmpRoot ext4 rw,relatime,user_xattr,barrier=0,journal_checksum,data=ordered 0 0
- sys /sys sysfs rw,relatime 0 0
- /dev/root.old / ext2 rw,relatime,errors=continue,user_xattr 0 0
- none /dev devtmpfs rw,relatime,size=512652k,nr_[ 221.676950] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
- inodes=128163,mode=755 0 0
- proc /proc proc rw,relatime 0 0
- linuxrc.syno executed successfully.
- [ 221.727720] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 221.735603] VFS: Mounted root (ext4 filesystem) on device 9:0.
- [ 221.741467] Trying to move old root to /initrd ... okay
- [ 221.753931] Freeing init memory: 196K
- [ 222.658067] EXT4-fs (md0): re-mounted. Opts: (null)
- [ 242.324577] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 242.330159] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 243.286453] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
- ==================== start udevd ====================
- [ 259.985309] NET: Registered protocol family 10
- [ 260.025655] IPv6 over IPv4 tunneling driver
- [ 260.827938] init: syno-auth-check main process (2182) killed by TERM signal
- [ 261.744937] mvCesaInit: channels=2, session=640, queue=64
- [ 261.841944] encryptfs using the OCF package.
- [ 262.071312] systemd-udevd[2613]: starting version 204
- ===== trigger device plug event =====
- [ 262.187342] fuse init (API version 7.22)
- [ 263.018440] Loading modules backported from Linux version v3.12-0-g5e01dc7
- [ 263.025342] Backport generated by backports.git v3.12-1-0-g9ae6b6c
- [ 263.923648] exFAT: Version 1.2.9
- [ 264.697873] correction with 0x03
- [ 264.707506] 2020-4-15 20:28:4 UTC
- [ 264.710839] synobios: load, major number 201
- [ 264.715137] Brand: Synology
- [ 264.718014] Model: DS-414
- [ 264.720663] This is default settings: set group disks wakeup number to 1, spinup time deno 1
- [ 264.729177] synobios cpu_arch proc entry initialized
- [ 264.734165] synobios crypto_hw proc entry initialized
- [ 264.739256] synobios syno_platform proc entry initialized
- [ 264.744791] synobios open /dev/ttyS1 success
- [ 267.176663] eth0: mac address changed
- [ 267.356038] eth1: mac address changed
- [ 267.676872] pool #0: pkt_size=1536, buf_size=1632 - 2048 of 2048 buffers added
- [ 267.687757] pool #2: pkt_size=256, buf_size=352 - 3072 of 3072 buffers added
- [ 267.694883] eth0: link up
- [ 267.697568] eth0: started
- [ 269.614538] pool #1: pkt_size=1536, buf_size=1632 - 2048 of 2048 buffers added
- [ 269.625593] pool #3: pkt_size=256, buf_size=352 - 3072 of 3072 buffers added
- [ 269.632743] eth1: started
- [ 269.666271] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 270.118646] init: dhcp-client (eth0) main process (4337) killed by TERM signal
- [ 272.892039] md: md2 stopped.
- [ 272.905587] md: bind<sda5>
- [ 272.912661] md: bind<sdb5>
- [ 272.957442] md/raid1:md2: active with 2 out of 2 mirrors
- [ 272.977656] md2: detected capacity change from 0 to 495160786944
- [ 273.022985] md2: unknown partition table
- [ 277.731410] EXT4-fs (dm-0): barriers disabled
- [ 277.891163] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
- [ 285.046027] Initializing USB Mass Storage driver...
- [ 285.051121] usbcore: registered new interface driver usb-storage
- [ 285.057149] USB Mass Storage support registered.
- [ 285.148062] usbcore: registered new interface driver usblp
- [ 285.350709] usbcore: registered new interface driver usbhid
- [ 285.356316] usbhid: USB HID core driver
- [ 285.597352] iSCSI: init_io_buffer_head(833) LUN-backup: 512 buffers allocated, total 2097152 bytes successfully
- Synology login: a[ 293.742299] warning: `nginx' uses 32-bit capabilities (legacy support in use)
- [ 293.748398] warning: `nginx' uses 32-bit capabilities (legacy support in use)
- dmi[ 294.227893] ata1.00: configured for UDMA/133
- [ 294.232199] ata1: EH complete
- n
- Password: [ 295.507904] ata2.00: configured for UDMA/133
- [ 295.512275] ata2: EH complete
- admin@Synology:~$ [ 304.188531] loop: module loaded
- [ 308.957747] findhostd uses obsolete (PF_INET,SOCK_PACKET)
- [ 309.005336] init: synoscheduler-vmtouch main process (1570) killed by TERM signal
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement