Advertisement
mysterio

sudo smartctl -a /dev/sdX (on battery)

May 29th, 2012
655
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.48 KB | None | 0 0
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Western Digital Scorpio Blue Serial ATA
  3. Device Model: WDC WD2500BEVS-60UST0
  4. Serial Number: WD-WXE708H75194
  5. LU WWN Device Id: 5 0014ee 2571ceeec
  6. Firmware Version: 01.01A01
  7. User Capacity: 250,059,350,016 bytes [250 GB]
  8. Sector Size: 512 bytes logical/physical
  9. Device is: In smartctl database [for details use: -P show]
  10. ATA Version is: 8
  11. ATA Standard is: Exact ATA specification draft version not indicated
  12. Local Time is: Tue May 29 16:26:45 2012 GMT
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18. See vendor-specific Attribute list for marginal Attributes.
  19.  
  20. General SMART Values:
  21. Offline data collection status: (0x80) Offline data collection activity
  22. was never started.
  23. Auto Offline Data Collection: Enabled.
  24. Self-test execution status: ( 0) The previous self-test routine completed
  25. without error or no self-test has ever
  26. been run.
  27. Total time to complete Offline
  28. data collection: ( 9600) seconds.
  29. Offline data collection
  30. capabilities: (0x5b) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. Offline surface scan supported.
  35. Self-test supported.
  36. No Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 2) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 115) minutes.
  47. SCT capabilities: (0x303f) SCT Status supported.
  48. SCT Error Recovery Control supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 13
  56. 3 Spin_Up_Time 0x0027 191 187 021 Pre-fail Always - 1450
  57. 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5529
  58. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  59. 7 Seek_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
  60. 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5333
  61. 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
  62. 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0
  63. 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4009
  64. 187 Reported_Uncorrect 0x0032 100 094 000 Old_age Always - 6
  65. 188 Command_Timeout 0x0032 100 001 000 Old_age Always - 8590066004
  66. 190 Airflow_Temperature_Cel 0x0022 059 035 040 Old_age Always In_the_past 41
  67. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 705
  68. 193 Load_Cycle_Count 0x0032 185 185 000 Old_age Always - 45055
  69. 194 Temperature_Celsius 0x0022 106 082 000 Old_age Always - 41
  70. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  71. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  72. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 2
  74. 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 9 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 9 occurred at disk power-on lifetime: 2948 hours (122 days + 20 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 40 51 08 f8 14 4d 40 Error: UNC 8 sectors at LBA = 0x004d14f8 = 5051640
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 25 00 08 f8 14 4d 01 00 00:40:58.568 READ DMA EXT
  104. 25 00 08 a0 19 4d 01 00 00:40:58.464 READ DMA EXT
  105. 25 00 01 30 c8 96 0d 00 00:40:57.724 READ DMA EXT
  106. 25 00 50 e0 c7 96 0d 00 00:40:57.723 READ DMA EXT
  107. 25 00 08 d8 c7 96 0d 00 00:40:57.718 READ DMA EXT
  108.  
  109. Error 8 occurred at disk power-on lifetime: 1978 hours (82 days + 10 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 10 51 38 a8 83 5d 40 Error: IDNF 56 sectors at LBA = 0x005d83a8 = 6128552
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 35 00 38 a8 83 5d 00 00 02:46:43.558 WRITE DMA EXT
  121. 25 00 40 1e 60 1d 1a 00 02:46:42.431 READ DMA EXT
  122. 25 00 f8 26 5f 1d 1a 00 02:46:42.252 READ DMA EXT
  123. 25 00 08 1e 5f 1d 1a 00 02:46:42.252 READ DMA EXT
  124. 25 00 69 66 eb 6f 16 00 02:46:42.241 READ DMA EXT
  125.  
  126. Error 7 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 01 51 78 78 8a de e0 Error: AMNF at LBA = 0x00de8a78 = 14584440
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. 29 ff 78 78 8a de 18 00 00:00:43.013 READ MULTIPLE EXT
  138. 25 ff 78 78 8a de 18 00 00:00:38.486 READ DMA EXT
  139. 29 ff 78 78 8a de 18 00 00:00:34.503 READ MULTIPLE EXT
  140. 25 ff 78 78 8a de 18 00 00:00:30.519 READ DMA EXT
  141. 29 ff 78 78 8a de 18 00 00:00:25.970 READ MULTIPLE EXT
  142.  
  143. Error 6 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 01 51 78 78 8a de e0 Error: AMNF 120 sectors at LBA = 0x00de8a78 = 14584440
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 25 ff 78 78 8a de 18 00 00:00:38.486 READ DMA EXT
  155. 29 ff 78 78 8a de 18 00 00:00:34.503 READ MULTIPLE EXT
  156. 25 ff 78 78 8a de 18 00 00:00:30.519 READ DMA EXT
  157. 29 ff 78 78 8a de 18 00 00:00:25.970 READ MULTIPLE EXT
  158. 25 ff 78 78 8a de 18 00 00:00:21.448 READ DMA EXT
  159.  
  160. Error 5 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 01 51 78 78 8a de e0 Error: AMNF at LBA = 0x00de8a78 = 14584440
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. 29 ff 78 78 8a de 18 00 00:00:34.503 READ MULTIPLE EXT
  172. 25 ff 78 78 8a de 18 00 00:00:30.519 READ DMA EXT
  173. 29 ff 78 78 8a de 18 00 00:00:25.970 READ MULTIPLE EXT
  174. 25 ff 78 78 8a de 18 00 00:00:21.448 READ DMA EXT
  175. 25 ff 78 00 8a de 18 00 00:00:21.447 READ DMA EXT
  176.  
  177. SMART Self-test log structure revision number 1
  178. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  179. # 1 Short offline Completed without error 00% 5207 -
  180. # 2 Short offline Completed without error 00% 3714 -
  181.  
  182. SMART Selective self-test log data structure revision number 1
  183. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  184. 1 0 0 Not_testing
  185. 2 0 0 Not_testing
  186. 3 0 0 Not_testing
  187. 4 0 0 Not_testing
  188. 5 0 0 Not_testing
  189. Selective self-test flags (0x0):
  190. After scanning selected spans, do NOT read-scan remainder of disk.
  191. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement