Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-5 (2019-06-19)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=/dev/sda5 ro quiet
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df05dfff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000df05e000-0x00000000df0a8fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000df0a9000-0x00000000df0b0fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000df0b1000-0x00000000df3cbfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000df3cc000-0x00000000df3ccfff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000df3cd000-0x00000000df3dcfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000df3dd000-0x00000000df3e7fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000df3e8000-0x00000000df40ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000df410000-0x00000000df452fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000df453000-0x00000000df68dfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000df68e000-0x00000000df7fffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f7fffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: /DH67BL, BIOS BLH6710H.86A.0119.2011.0523.1030 05/23/2011
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2793.754 MHz processor
- [ 0.001928] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.001930] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.001935] last_pfn = 0x21f800 max_arch_pfn = 0x400000000
- [ 0.001939] MTRR default type: uncachable
- [ 0.001939] MTRR fixed ranges enabled:
- [ 0.001940] 00000-9FFFF write-back
- [ 0.001941] A0000-BFFFF uncachable
- [ 0.001942] C0000-CFFFF write-protect
- [ 0.001942] D0000-E7FFF uncachable
- [ 0.001943] E8000-FFFFF write-protect
- [ 0.001943] MTRR variable ranges enabled:
- [ 0.001945] 0 base 000000000 mask E00000000 write-back
- [ 0.001946] 1 base 200000000 mask FE0000000 write-back
- [ 0.001946] 2 base 0E0000000 mask FE0000000 uncachable
- [ 0.001947] 3 base 21F800000 mask FFF800000 uncachable
- [ 0.001947] 4 disabled
- [ 0.001948] 5 disabled
- [ 0.001948] 6 disabled
- [ 0.001949] 7 disabled
- [ 0.001949] 8 disabled
- [ 0.001949] 9 disabled
- [ 0.002908] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.003012] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
- [ 0.003017] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
- [ 0.012171] found SMP MP-table at [mem 0x000fcee0-0x000fceef]
- [ 0.028005] Base memory trampoline at [(____ptrval____)] 97000 size 24576
- [ 0.028010] BRK [0x12fa01000, 0x12fa01fff] PGTABLE
- [ 0.028012] BRK [0x12fa02000, 0x12fa02fff] PGTABLE
- [ 0.028013] BRK [0x12fa03000, 0x12fa03fff] PGTABLE
- [ 0.028038] BRK [0x12fa04000, 0x12fa04fff] PGTABLE
- [ 0.028039] BRK [0x12fa05000, 0x12fa05fff] PGTABLE
- [ 0.028096] BRK [0x12fa06000, 0x12fa06fff] PGTABLE
- [ 0.028142] BRK [0x12fa07000, 0x12fa07fff] PGTABLE
- [ 0.028152] BRK [0x12fa08000, 0x12fa08fff] PGTABLE
- [ 0.028163] BRK [0x12fa09000, 0x12fa09fff] PGTABLE
- [ 0.028192] BRK [0x12fa0a000, 0x12fa0afff] PGTABLE
- [ 0.028237] BRK [0x12fa0b000, 0x12fa0bfff] PGTABLE
- [ 0.028264] BRK [0x12fa0c000, 0x12fa0cfff] PGTABLE
- [ 0.028348] RAMDISK: [mem 0x33a33000-0x35d10fff]
- [ 0.028354] ACPI: Early table checksum verification disabled
- [ 0.033834] ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
- [ 0.033837] ACPI: XSDT 0x00000000DF0A9068 00004C (v01 INTEL DH67BL 01072009 AMI 00010013)
- [ 0.033842] ACPI: FACP 0x00000000DF0B03F0 0000F4 (v04 INTEL DH67BL 01072009 AMI 00010013)
- [ 0.033846] ACPI: DSDT 0x00000000DF0A9140 0072B0 (v02 INTEL DH67BL 00000012 INTL 20051117)
- [ 0.033849] ACPI: FACS 0x00000000DF3DFF80 000040
- [ 0.033852] ACPI: APIC 0x00000000DF0B04E8 000072 (v03 INTEL DH67BL 01072009 AMI 00010013)
- [ 0.033854] ACPI: SSDT 0x00000000DF0B0560 000102 (v01 INTEL DH67BL 00000001 MSFT 03000001)
- [ 0.033857] ACPI: MCFG 0x00000000DF0B0668 00003C (v01 INTEL DH67BL 01072009 MSFT 00000097)
- [ 0.033860] ACPI: HPET 0x00000000DF0B06A8 000038 (v01 INTEL DH67BL 01072009 AMI. 00000004)
- [ 0.033866] ACPI: Local APIC address 0xfee00000
- [ 0.033939] No NUMA configuration found
- [ 0.033940] Faking a node at [mem 0x0000000000000000-0x000000021f7fffff]
- [ 0.033944] NODE_DATA(0) allocated [mem 0x21f7f8000-0x21f7fcfff]
- [ 0.033967] Zone ranges:
- [ 0.033968] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.033969] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.033970] Normal [mem 0x0000000100000000-0x000000021f7fffff]
- [ 0.033971] Device empty
- [ 0.033971] Movable zone start for each node
- [ 0.033972] Early memory node ranges
- [ 0.033973] node 0: [mem 0x0000000000001000-0x000000000009cfff]
- [ 0.033973] node 0: [mem 0x0000000000100000-0x00000000df05dfff]
- [ 0.033974] node 0: [mem 0x00000000df3cc000-0x00000000df3ccfff]
- [ 0.033975] node 0: [mem 0x00000000df68e000-0x00000000df7fffff]
- [ 0.033975] node 0: [mem 0x0000000100000000-0x000000021f7fffff]
- [ 0.033978] Reserved but unavailable: 100 pages
- [ 0.033979] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f7fffff]
- [ 0.033981] On node 0 totalpages: 2091373
- [ 0.033982] DMA zone: 64 pages used for memmap
- [ 0.033982] DMA zone: 21 pages reserved
- [ 0.033983] DMA zone: 3996 pages, LIFO batch:0
- [ 0.034079] DMA32 zone: 14216 pages used for memmap
- [ 0.034080] DMA32 zone: 909777 pages, LIFO batch:63
- [ 0.055719] Normal zone: 18400 pages used for memmap
- [ 0.055721] Normal zone: 1177600 pages, LIFO batch:63
- [ 0.083163] ACPI: PM-Timer IO Port: 0x408
- [ 0.083166] ACPI: Local APIC address 0xfee00000
- [ 0.083172] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.083183] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.083185] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.083187] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.083188] ACPI: IRQ0 used by override.
- [ 0.083188] ACPI: IRQ9 used by override.
- [ 0.083190] Using ACPI (MADT) for SMP configuration information
- [ 0.083191] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.083196] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.083212] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.083213] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- [ 0.083214] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.083214] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.083215] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.083216] PM: Registered nosave memory: [mem 0xdf05e000-0xdf0a8fff]
- [ 0.083217] PM: Registered nosave memory: [mem 0xdf0a9000-0xdf0b0fff]
- [ 0.083217] PM: Registered nosave memory: [mem 0xdf0b1000-0xdf3cbfff]
- [ 0.083218] PM: Registered nosave memory: [mem 0xdf3cd000-0xdf3dcfff]
- [ 0.083219] PM: Registered nosave memory: [mem 0xdf3dd000-0xdf3e7fff]
- [ 0.083219] PM: Registered nosave memory: [mem 0xdf3e8000-0xdf40ffff]
- [ 0.083220] PM: Registered nosave memory: [mem 0xdf410000-0xdf452fff]
- [ 0.083220] PM: Registered nosave memory: [mem 0xdf453000-0xdf68dfff]
- [ 0.083221] PM: Registered nosave memory: [mem 0xdf800000-0xfed1bfff]
- [ 0.083222] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.083222] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
- [ 0.083223] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
- [ 0.083225] [mem 0xdf800000-0xfed1bfff] available for PCI devices
- [ 0.083225] Booting paravirtualized kernel on bare hardware
- [ 0.083228] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.181698] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
- [ 0.181704] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.181964] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u524288
- [ 0.181970] pcpu-alloc: s143256 r8192 d28776 u524288 alloc=1*2097152
- [ 0.181971] pcpu-alloc: [0] 0 1 2 3
- [ 0.181990] Built 1 zonelists, mobility grouping on. Total pages: 2058672
- [ 0.181990] Policy zone: Normal
- [ 0.181992] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=/dev/sda5 ro quiet
- [ 0.188601] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.188603] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.221764] Memory: 8107176K/8365492K available (10252K kernel code, 1243K rwdata, 3184K rodata, 1580K init, 2296K bss, 258316K reserved, 0K cma-reserved)
- [ 0.221850] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.221856] Kernel/User page tables isolation: enabled
- [ 0.221895] ftrace: allocating 31827 entries in 125 pages
- [ 0.233397] rcu: Hierarchical RCU implementation.
- [ 0.233399] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
- [ 0.233400] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.236388] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
- [ 0.240555] Console: colour VGA+ 80x25
- [ 0.240559] console [tty0] enabled
- [ 0.240573] ACPI: Core revision 20180810
- [ 0.240714] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.240725] hpet clockevent registered
- [ 0.240730] APIC: Switch to symmetric I/O mode setup
- [ 0.241147] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.260729] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2845345983f, max_idle_ns: 440795274940 ns
- [ 0.260741] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.50 BogoMIPS (lpj=11175016)
- [ 0.260743] pid_max: default: 32768 minimum: 301
- [ 0.260766] Security Framework initialized
- [ 0.260767] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.260780] AppArmor: AppArmor initialized
- [ 0.262293] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.263207] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.263245] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.263276] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.263474] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.263475] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.263479] mce: CPU supports 9 MCE banks
- [ 0.263487] CPU0: Thermal monitoring enabled (TM1)
- [ 0.263497] process: using mwait in idle threads
- [ 0.263500] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
- [ 0.263501] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
- [ 0.263502] Spectre V2 : Mitigation: Full generic retpoline
- [ 0.263503] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- [ 0.263503] Speculative Store Bypass: Vulnerable
- [ 0.263535] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
- [ 0.263671] Freeing SMP alternatives memory: 24K
- [ 0.268800] TSC deadline timer enabled
- [ 0.268803] smpboot: CPU0: Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz (family: 0x6, model: 0x2a, stepping: 0x7)
- [ 0.268890] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
- [ 0.268909] core: PEBS disabled due to CPU errata, please upgrade microcode
- [ 0.268911] ... version: 3
- [ 0.268911] ... bit width: 48
- [ 0.268912] ... generic registers: 8
- [ 0.268912] ... value mask: 0000ffffffffffff
- [ 0.268913] ... max period: 00007fffffffffff
- [ 0.268913] ... fixed-purpose events: 3
- [ 0.268914] ... event mask: 00000007000000ff
- [ 0.268952] rcu: Hierarchical SRCU implementation.
- [ 0.269486] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.269526] smp: Bringing up secondary CPUs ...
- [ 0.269597] x86: Booting SMP configuration:
- [ 0.269597] .... node #0, CPUs: #1 #2 #3
- [ 0.275140] smp: Brought up 1 node, 4 CPUs
- [ 0.275140] smpboot: Max logical packages: 1
- [ 0.275140] smpboot: Total of 4 processors activated (22350.03 BogoMIPS)
- [ 0.276966] devtmpfs: initialized
- [ 0.276966] x86/mm: Memory block size: 128MB
- [ 0.277349] PM: Registering ACPI NVS region [mem 0xdf05e000-0xdf0a8fff] (307200 bytes)
- [ 0.277349] PM: Registering ACPI NVS region [mem 0xdf3dd000-0xdf3e7fff] (45056 bytes)
- [ 0.277349] PM: Registering ACPI NVS region [mem 0xdf410000-0xdf452fff] (274432 bytes)
- [ 0.277349] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.277349] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.277349] pinctrl core: initialized pinctrl subsystem
- [ 0.277349] NET: Registered protocol family 16
- [ 0.277349] audit: initializing netlink subsys (disabled)
- [ 0.277349] audit: type=2000 audit(1562777724.036:1): state=initialized audit_enabled=0 res=1
- [ 0.277349] cpuidle: using governor ladder
- [ 0.277349] cpuidle: using governor menu
- [ 0.277349] ACPI: bus type PCI registered
- [ 0.277349] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.277349] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.277349] PCI: not using MMCONFIG
- [ 0.277349] PCI: Using configuration type 1 for base access
- [ 0.277349] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
- [ 0.277438] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.277438] ACPI: Added _OSI(Module Device)
- [ 0.277438] ACPI: Added _OSI(Processor Device)
- [ 0.277438] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.277438] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.277438] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.277438] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 0.282032] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.283375] ACPI: Dynamic OEM Table Load:
- [ 0.283379] ACPI: SSDT 0xFFFF92D215F64C00 00038C (v01 AMI IST 00000001 MSFT 03000001)
- [ 0.283545] ACPI: Dynamic OEM Table Load:
- [ 0.283547] ACPI: SSDT 0xFFFF92D2158F4300 000084 (v01 AMI CST 00000001 MSFT 03000001)
- [ 0.284146] ACPI: Interpreter enabled
- [ 0.284157] ACPI: (supports S0 S3 S4 S5)
- [ 0.284158] ACPI: Using IOAPIC for interrupt routing
- [ 0.284179] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.284226] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
- [ 0.284230] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
- [ 0.284302] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.284498] ACPI: Enabled 8 GPEs in block 00 to 3F
- [ 0.284676] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- [ 0.289062] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.289066] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.289168] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
- [ 0.289260] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.289266] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
- [ 0.289491] PCI host bridge to bus 0000:00
- [ 0.289493] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
- [ 0.289494] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
- [ 0.289495] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
- [ 0.289496] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.289497] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.289498] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
- [ 0.289499] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window]
- [ 0.289501] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.289507] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
- [ 0.289583] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
- [ 0.289615] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.289702] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
- [ 0.289728] pci 0000:00:16.0: reg 0x10: [mem 0xf7229000-0xf722900f 64bit]
- [ 0.289799] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.289870] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
- [ 0.289890] pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
- [ 0.289898] pci 0000:00:19.0: reg 0x14: [mem 0xf7228000-0xf7228fff]
- [ 0.289906] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
- [ 0.289964] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.290032] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
- [ 0.290053] pci 0000:00:1a.0: reg 0x10: [mem 0xf7227000-0xf72273ff]
- [ 0.290136] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.290204] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
- [ 0.290225] pci 0000:00:1b.0: reg 0x10: [mem 0xf7220000-0xf7223fff 64bit]
- [ 0.290297] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.290364] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
- [ 0.290449] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.290527] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
- [ 0.290612] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.290690] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
- [ 0.290712] pci 0000:00:1d.0: reg 0x10: [mem 0xf7226000-0xf72263ff]
- [ 0.290794] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.290863] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100
- [ 0.291029] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
- [ 0.291047] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
- [ 0.291055] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
- [ 0.291062] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
- [ 0.291069] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
- [ 0.291077] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
- [ 0.291084] pci 0000:00:1f.2: reg 0x24: [mem 0xf7225000-0xf72257ff]
- [ 0.291124] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.291187] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
- [ 0.291205] pci 0000:00:1f.3: reg 0x10: [mem 0xf7224000-0xf72240ff 64bit]
- [ 0.291225] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
- [ 0.291323] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
- [ 0.291338] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
- [ 0.291346] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.291354] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
- [ 0.291360] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
- [ 0.291365] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
- [ 0.291370] pci 0000:01:00.0: enabling Extended Tags
- [ 0.291447] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
- [ 0.291459] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
- [ 0.291490] pci 0000:01:00.1: enabling Extended Tags
- [ 0.291566] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.291568] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.291570] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
- [ 0.291572] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
- [ 0.291644] pci 0000:02:00.0: [1283:8892] type 01 class 0x060400
- [ 0.291860] pci 0000:02:00.0: supports D1 D2
- [ 0.291861] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.291943] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.291956] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
- [ 0.292040] pci_bus 0000:03: extended config space not accessible
- [ 0.292151] pci 0000:02:00.0: PCI bridge to [bus 03]
- [ 0.292255] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
- [ 0.292296] pci 0000:04:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
- [ 0.292448] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
- [ 0.292564] pci 0000:00:1c.3: PCI bridge to [bus 04]
- [ 0.292570] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
- [ 0.293022] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.293063] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.293103] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.293142] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
- [ 0.293182] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.293221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- [ 0.293261] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.293300] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.293392] pci 0000:01:00.0: vgaarb: setting as boot VGA device
- [ 0.293392] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.293392] pci 0000:01:00.0: vgaarb: bridge control possible
- [ 0.293392] vgaarb: loaded
- [ 0.293392] pps_core: LinuxPPS API ver. 1 registered
- [ 0.293392] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.293392] PTP clock support registered
- [ 0.293392] EDAC MC: Ver: 3.0.0
- [ 0.293392] PCI: Using ACPI for IRQ routing
- [ 0.294258] PCI: pci_cache_line_size set to 64 bytes
- [ 0.294302] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.294303] e820: reserve RAM buffer [mem 0xdf05e000-0xdfffffff]
- [ 0.294304] e820: reserve RAM buffer [mem 0xdf3cd000-0xdfffffff]
- [ 0.294305] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
- [ 0.294306] e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
- [ 0.294386] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.294386] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.296744] clocksource: Switched to clocksource tsc-early
- [ 0.305337] VFS: Disk quotas dquot_6.6.0
- [ 0.305353] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.305449] AppArmor: AppArmor Filesystem Enabled
- [ 0.305466] pnp: PnP ACPI init
- [ 0.305597] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
- [ 0.305599] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.305600] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.305601] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.305602] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
- [ 0.305607] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.305703] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.305926] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.305969] system 00:03: [io 0x04d0-0x04d1] has been reserved
- [ 0.305972] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.306099] system 00:04: [io 0x0400-0x0453] has been reserved
- [ 0.306100] system 00:04: [io 0x0458-0x047f] has been reserved
- [ 0.306103] system 00:04: [io 0x1180-0x119f] has been reserved
- [ 0.306104] system 00:04: [io 0x0500-0x057f] has been reserved
- [ 0.306105] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.306107] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
- [ 0.306108] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
- [ 0.306109] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.306112] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.306157] system 00:05: [io 0x0454-0x0457] has been reserved
- [ 0.306160] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.306312] pnp: PnP ACPI: found 6 devices
- [ 0.311924] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.311968] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.311970] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.311972] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
- [ 0.311974] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
- [ 0.311977] pci 0000:02:00.0: PCI bridge to [bus 03]
- [ 0.312005] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
- [ 0.312016] pci 0000:00:1c.3: PCI bridge to [bus 04]
- [ 0.312020] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
- [ 0.312029] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
- [ 0.312030] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
- [ 0.312031] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
- [ 0.312032] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
- [ 0.312033] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
- [ 0.312034] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
- [ 0.312035] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window]
- [ 0.312036] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.312037] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
- [ 0.312038] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
- [ 0.312039] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
- [ 0.312100] NET: Registered protocol family 2
- [ 0.312245] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
- [ 0.312278] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.312413] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.312621] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.312651] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.312682] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.312742] NET: Registered protocol family 1
- [ 0.312746] NET: Registered protocol family 44
- [ 0.312993] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.313002] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
- [ 0.313115] PCI: CLS 64 bytes, default 64
- [ 0.313147] Unpacking initramfs...
- [ 0.858390] Freeing initrd memory: 35704K
- [ 0.858471] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.858472] software IO TLB: mapped [mem 0xdb05e000-0xdf05e000] (64MB)
- [ 0.859060] Initialise system trusted keyrings
- [ 0.859069] Key type blacklist registered
- [ 0.859111] workingset: timestamp_bits=40 max_order=21 bucket_order=0
- [ 0.860163] zbud: loaded
- [ 0.860376] pstore: using deflate compression
- [ 1.031612] Key type asymmetric registered
- [ 1.031613] Asymmetric key parser 'x509' registered
- [ 1.031620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 1.031646] io scheduler noop registered
- [ 1.031646] io scheduler deadline registered
- [ 1.031668] io scheduler cfq registered (default)
- [ 1.031669] io scheduler mq-deadline registered
- [ 1.032101] pcieport 0000:00:01.0: Signaling PME with IRQ 24
- [ 1.032127] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
- [ 1.032148] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
- [ 1.032187] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 1.032197] intel_idle: MWAIT substates: 0x1120
- [ 1.032197] intel_idle: v0.4.1 model 0x2A
- [ 1.032328] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 1.032747] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.033207] Linux agpgart interface v0.103
- [ 1.033247] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 1.033247] AMD IOMMUv2 functionality not available on this system
- [ 1.033548] i8042: PNP: No PS/2 controller found.
- [ 1.033548] i8042: Probing ports directly.
- [ 1.036307] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.036310] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.036437] mousedev: PS/2 mouse device common for all mice
- [ 1.036470] rtc_cmos 00:02: RTC can wake from S4
- [ 1.036627] rtc_cmos 00:02: registered as rtc0
- [ 1.036639] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.036647] intel_pstate: Intel P-state driver initializing
- [ 1.036864] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.037424] NET: Registered protocol family 10
- [ 1.047774] Segment Routing with IPv6
- [ 1.047801] mip6: Mobile IPv6
- [ 1.047804] NET: Registered protocol family 17
- [ 1.047941] mpls_gso: MPLS GSO support
- [ 1.048474] microcode: sig=0x206a7, pf=0x2, revision=0x14
- [ 1.048563] microcode: Microcode Update Driver: v2.2.
- [ 1.048577] sched_clock: Marking stable (1044393201, 4162119)->(1281759797, -233204477)
- [ 1.048768] registered taskstats version 1
- [ 1.048769] Loading compiled-in X.509 certificates
- [ 1.088510] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
- [ 1.088525] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
- [ 1.088540] zswap: loaded using pool lzo/zbud
- [ 1.088610] AppArmor: AppArmor sha1 policy hashing enabled
- [ 1.088918] rtc_cmos 00:02: setting system clock to 2019-07-10 16:55:25 UTC (1562777725)
- [ 1.090422] Freeing unused kernel image memory: 1580K
- [ 1.108786] Write protecting the kernel read-only data: 16384k
- [ 1.109476] Freeing unused kernel image memory: 2028K
- [ 1.109746] Freeing unused kernel image memory: 912K
- [ 1.120296] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 1.120297] x86/mm: Checking user space page tables
- [ 1.128310] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 1.128312] Run /init as init process
- [ 1.187258] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
- [ 1.187374] ACPI: Power Button [PWRB]
- [ 1.187417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 1.187425] ACPI: Power Button [PWRF]
- [ 1.207836] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
- [ 1.208772] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 1.208772] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 1.208869] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 1.211977] ACPI: bus type USB registered
- [ 1.211995] usbcore: registered new interface driver usbfs
- [ 1.212001] usbcore: registered new interface driver hub
- [ 1.212020] usbcore: registered new device driver usb
- [ 1.217668] cryptd: max_cpu_qlen set to 1000
- [ 1.217737] SCSI subsystem initialized
- [ 1.218683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.219323] ehci-pci: EHCI PCI platform driver
- [ 1.219441] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 1.219447] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 1.219459] ehci-pci 0000:00:1a.0: debug port 2
- [ 1.223375] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 1.224385] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7227000
- [ 1.230517] AVX version of gcm_enc/dec engaged.
- [ 1.230518] AES CTR mode by8 optimization enabled
- [ 1.236747] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 1.236796] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 1.236797] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.236798] usb usb1: Product: EHCI Host Controller
- [ 1.236799] usb usb1: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
- [ 1.236800] usb usb1: SerialNumber: 0000:00:1a.0
- [ 1.236914] hub 1-0:1.0: USB hub found
- [ 1.236921] hub 1-0:1.0: 2 ports detected
- [ 1.237127] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 1.237131] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.237142] ehci-pci 0000:00:1d.0: debug port 2
- [ 1.241046] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 1.241513] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7226000
- [ 1.247205] libata version 3.00 loaded.
- [ 1.251938] ahci 0000:00:1f.2: version 3.0
- [ 1.256751] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 1.256946] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 1.256947] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.256948] usb usb2: Product: EHCI Host Controller
- [ 1.256949] usb usb2: Manufacturer: Linux 4.19.0-5-amd64 ehci_hcd
- [ 1.256950] usb usb2: SerialNumber: 0000:00:1d.0
- [ 1.257054] hub 2-0:1.0: USB hub found
- [ 1.257060] hub 2-0:1.0: 2 ports detected
- [ 1.257171] xhci_hcd 0000:04:00.0: xHCI Host Controller
- [ 1.257177] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
- [ 1.257318] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
- [ 1.257554] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 1.257555] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.257556] usb usb3: Product: xHCI Host Controller
- [ 1.257557] usb usb3: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
- [ 1.257558] usb usb3: SerialNumber: 0000:04:00.0
- [ 1.257644] hub 3-0:1.0: USB hub found
- [ 1.257654] hub 3-0:1.0: 2 ports detected
- [ 1.257759] xhci_hcd 0000:04:00.0: xHCI Host Controller
- [ 1.257762] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
- [ 1.257764] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
- [ 1.260772] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.260792] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
- [ 1.260793] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.260794] usb usb4: Product: xHCI Host Controller
- [ 1.260795] usb usb4: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
- [ 1.260796] usb usb4: SerialNumber: 0000:04:00.0
- [ 1.260952] hub 4-0:1.0: USB hub found
- [ 1.260964] hub 4-0:1.0: 2 ports detected
- [ 1.264781] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37 impl SATA mode
- [ 1.264784] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
- [ 1.337345] scsi host0: ahci
- [ 1.337707] scsi host1: ahci
- [ 1.337955] scsi host2: ahci
- [ 1.338123] scsi host3: ahci
- [ 1.338276] scsi host4: ahci
- [ 1.338388] scsi host5: ahci
- [ 1.338467] ata1: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225100 irq 28
- [ 1.338470] ata2: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225180 irq 28
- [ 1.338472] ata3: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225200 irq 28
- [ 1.338473] ata4: DUMMY
- [ 1.338475] ata5: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225300 irq 28
- [ 1.338477] ata6: SATA max UDMA/133 abar m2048@0xf7225000 port 0xf7225380 irq 28
- [ 1.342684] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
- [ 1.356416] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
- [ 1.469455] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 38:60:77:2f:bf:d6
- [ 1.469456] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 1.469611] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
- [ 1.470509] e1000e 0000:00:19.0 eno1: renamed from eth0
- [ 1.474241] nouveau 0000:01:00.0: bios: version 70.18.3a.00.07
- [ 1.474403] nouveau 0000:01:00.0: bios: OOB 1 d7500086 d7500086
- [ 1.474955] nouveau 0000:01:00.0: fb: 512 MiB DDR2
- [ 1.572744] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 1.596744] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 1.596756] usb 3-1: new low-speed USB device number 2 using xhci_hcd
- [ 1.651075] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.651127] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.651198] ata1: SATA link down (SStatus 0 SControl 300)
- [ 1.651246] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.651850] ata2.00: ATA-9: WDC WDS240G2G0A-00JH30, UF450000, max UDMA/133
- [ 1.651851] ata2.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 32)
- [ 1.652755] ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
- [ 1.652756] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 1.654649] ata3.00: configured for UDMA/133
- [ 1.657475] ata2.00: configured for UDMA/133
- [ 1.657612] scsi 1:0:0:0: Direct-Access ATA WDC WDS240G2G0A- 0000 PQ: 0 ANSI: 5
- [ 1.657893] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
- [ 1.659021] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.661198] ata5.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
- [ 1.665459] ata5.00: configured for UDMA/100
- [ 1.666664] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224BB SB00 PQ: 0 ANSI: 5
- [ 1.727571] sd 1:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
- [ 1.727581] sd 1:0:0:0: [sda] Write Protect is off
- [ 1.727583] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.727592] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.727696] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 1.727700] sd 2:0:0:0: [sdb] Write Protect is off
- [ 1.727701] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.727708] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.729065] sda: sda1 sda2 sda3 < sda5 >
- [ 1.729159] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
- [ 1.729160] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.729345] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 1.729457] hub 1-1:1.0: USB hub found
- [ 1.729527] hub 1-1:1.0: 6 ports detected
- [ 1.751619] sdb: sdb1 sdb3 < sdb5 >
- [ 1.751933] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 1.757028] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
- [ 1.757030] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.757171] hub 2-1:1.0: USB hub found
- [ 1.757623] hub 2-1:1.0: 8 ports detected
- [ 1.779831] usb 3-1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
- [ 1.779832] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.779833] usb 3-1: Product: USB Optical Mouse
- [ 1.779834] usb 3-1: Manufacturer: Logitech
- [ 1.789948] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.802910] usbcore: registered new interface driver usbhid
- [ 1.802911] usbhid: USB HID core driver
- [ 1.804085] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C077.0001/input/input5
- [ 1.804137] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:04:00.0-1/input0
- [ 1.804786] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.804788] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.804924] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 1.872751] tsc: Refined TSC clocksource calibration: 2793.654 MHz
- [ 1.872757] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2844d5ba3f8, max_idle_ns: 440795222929 ns
- [ 1.872789] clocksource: Switched to clocksource tsc
- [ 2.016746] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
- [ 2.043341] random: fast init done
- [ 2.044744] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
- [ 2.127069] usb 1-1.2: New USB device found, idVendor=04f9, idProduct=01fe, bcdDevice= 1.00
- [ 2.127070] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.127071] usb 1-1.2: Product: MFC-250C
- [ 2.127072] usb 1-1.2: Manufacturer: Brother
- [ 2.127073] usb 1-1.2: SerialNumber: BROF0F202719
- [ 2.131743] usb-storage 1-1.2:1.2: USB Mass Storage device detected
- [ 2.131824] scsi host6: usb-storage 1-1.2:1.2
- [ 2.131896] usbcore: registered new interface driver usb-storage
- [ 2.133325] usbcore: registered new interface driver uas
- [ 2.155300] usb 2-1.1: New USB device found, idVendor=058f, idProduct=6362, bcdDevice= 1.29
- [ 2.155301] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.155302] usb 2-1.1: Product: Mass Storage Device
- [ 2.155303] usb 2-1.1: Manufacturer: Generic
- [ 2.155304] usb 2-1.1: SerialNumber: 058F312D81B
- [ 2.155674] usb-storage 2-1.1:1.0: USB Mass Storage device detected
- [ 2.155758] scsi host7: usb-storage 2-1.1:1.0
- [ 2.204746] usb 1-1.4: new low-speed USB device number 4 using ehci-pci
- [ 2.318696] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=2c27, bcdDevice= 1.10
- [ 2.318698] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.318698] usb 1-1.4: Product: USB Keyboard
- [ 2.318699] usb 1-1.4: Manufacturer: USB
- [ 2.321741] input: USB USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:2C27.0002/input/input6
- [ 2.380904] hid-generic 0003:1A2C:2C27.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1a.0-1.4/input0
- [ 2.383378] input: USB USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:2C27.0003/input/input7
- [ 2.440778] input: USB USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:2C27.0003/input/input8
- [ 2.440879] hid-generic 0003:1A2C:2C27.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:1a.0-1.4/input1
- [ 2.788867] [TTM] Zone kernel: Available graphics memory: 4073712 kiB
- [ 2.788868] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 2.788869] [TTM] Initializing pool allocator
- [ 2.788874] [TTM] Initializing DMA pool allocator
- [ 2.788895] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
- [ 2.788896] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
- [ 2.788900] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
- [ 2.788901] nouveau 0000:01:00.0: DRM: DCB version 4.0
- [ 2.788903] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
- [ 2.788905] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
- [ 2.788906] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021362 00020010
- [ 2.788908] nouveau 0000:01:00.0: DRM: DCB outp 04: 01032310 00000000
- [ 2.788909] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
- [ 2.788910] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
- [ 2.788911] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
- [ 2.793373] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 2.793373] [drm] Driver supports precise vblank timestamp query.
- [ 2.794936] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
- [ 2.835033] nouveau 0000:01:00.0: DRM: allocated 1360x768 fb: 0x70000, bo (____ptrval____)
- [ 2.835139] fbcon: nouveaufb (fb0) is primary device
- [ 2.876826] Console: switching to colour frame buffer device 170x48
- [ 2.878441] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
- [ 2.892780] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
- [ 3.000736] raid6: sse2x1 gen() 9095 MB/s
- [ 3.068734] raid6: sse2x1 xor() 6537 MB/s
- [ 3.136737] raid6: sse2x2 gen() 11019 MB/s
- [ 3.185579] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
- [ 3.186176] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
- [ 3.186798] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
- [ 3.187284] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
- [ 3.191891] sd 7:0:0:0: [sdc] Attached SCSI removable disk
- [ 3.194013] sd 7:0:0:3: [sdf] Attached SCSI removable disk
- [ 3.197390] sd 7:0:0:1: [sdd] Attached SCSI removable disk
- [ 3.198762] sd 7:0:0:2: [sde] Attached SCSI removable disk
- [ 3.204735] raid6: sse2x2 xor() 7391 MB/s
- [ 3.272737] raid6: sse2x4 gen() 12708 MB/s
- [ 3.340734] raid6: sse2x4 xor() 8631 MB/s
- [ 3.340735] raid6: using algorithm sse2x4 gen() 12708 MB/s
- [ 3.340735] raid6: .... xor() 8631 MB/s, rmw enabled
- [ 3.340736] raid6: using ssse3x2 recovery algorithm
- [ 3.351406] xor: automatically using best checksumming function avx
- [ 3.353417] scsi 6:0:0:0: Direct-Access Brother MFC-250C 1.00 PQ: 0 ANSI: 2
- [ 3.413054] Btrfs loaded, crc32c=crc32c-intel
- [ 3.413680] sd 6:0:0:0: [sdg] Attached SCSI removable disk
- [ 3.845508] PM: Image not found (code -22)
- [ 4.002911] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.293416] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
- [ 4.320783] systemd[1]: Inserted module 'autofs4'
- [ 4.343473] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
- [ 4.360884] systemd[1]: Detected architecture x86-64.
- [ 4.364291] systemd[1]: Set hostname to <pk28>.
- [ 4.475368] random: systemd: uninitialized urandom read (16 bytes read)
- [ 4.476745] random: systemd: uninitialized urandom read (16 bytes read)
- [ 4.476844] systemd[1]: Listening on Journal Audit Socket.
- [ 4.476887] random: systemd: uninitialized urandom read (16 bytes read)
- [ 4.476951] systemd[1]: Listening on Syslog Socket.
- [ 4.477013] systemd[1]: Listening on udev Kernel Socket.
- [ 4.477080] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 4.477157] systemd[1]: Listening on Journal Socket.
- [ 4.478430] systemd[1]: Mounting Kernel Debug File System...
- [ 4.479546] systemd[1]: Starting Journal Service...
- [ 4.526442] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
- [ 4.613856] systemd-journald[298]: Received request to flush runtime journal from PID 1
- [ 4.704925] iTCO_vendor_support: vendor-support=0
- [ 4.707391] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 4.707427] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
- [ 4.707653] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
- [ 4.707654] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
- [ 4.707655] RAPL PMU: hw unit of domain package 2^-16 Joules
- [ 4.707655] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
- [ 4.712758] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 4.716751] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 4.718769] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 4.718831] sr 4:0:0:0: Attached scsi generic sg2 type 5
- [ 4.719498] sd 7:0:0:0: Attached scsi generic sg3 type 0
- [ 4.721647] sd 7:0:0:1: Attached scsi generic sg4 type 0
- [ 4.721713] sd 7:0:0:2: Attached scsi generic sg5 type 0
- [ 4.721749] sd 7:0:0:3: Attached scsi generic sg6 type 0
- [ 4.721851] sd 6:0:0:0: Attached scsi generic sg7 type 0
- [ 4.737563] input: PC Speaker as /devices/platform/pcspkr/input/input9
- [ 4.820217] snd_hda_intel 0000:01:00.1: Disabling MSI
- [ 4.820223] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
- [ 4.875700] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
- [ 4.875702] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 4.875703] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 4.875704] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 4.875705] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
- [ 4.875706] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 4.875707] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
- [ 4.875709] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
- [ 4.875710] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
- [ 4.905356] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- [ 4.905398] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 4.905436] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 4.905475] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 4.905513] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- [ 4.921721] intel_rapl: Found RAPL domain package
- [ 4.921723] intel_rapl: Found RAPL domain core
- [ 4.921724] intel_rapl: Found RAPL domain uncore
- [ 5.040844] Adding 7811068k swap on /dev/sdb1. Priority:-2 extents:1 across:7811068k FS
- [ 5.853256] usblp 1-1.2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01FE
- [ 5.853285] usbcore: registered new interface driver usblp
- [ 5.939103] random: crng init done
- [ 5.939106] random: 7 urandom warning(s) missed due to ratelimiting
- [ 6.070585] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
- [ 6.070660] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
- [ 6.070725] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
- [ 6.070788] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
- [ 11.764214] audit: type=1400 audit(1562770536.168:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=470 comm="apparmor_parser"
- [ 11.764246] audit: type=1400 audit(1562770536.168:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=472 comm="apparmor_parser"
- [ 11.765161] audit: type=1400 audit(1562770536.172:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=469 comm="apparmor_parser"
- [ 11.765912] audit: type=1400 audit(1562770536.172:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=471 comm="apparmor_parser"
- [ 11.765914] audit: type=1400 audit(1562770536.172:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=471 comm="apparmor_parser"
- [ 11.765916] audit: type=1400 audit(1562770536.172:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=471 comm="apparmor_parser"
- [ 11.767001] audit: type=1400 audit(1562770536.172:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=475 comm="apparmor_parser"
- [ 11.768571] audit: type=1400 audit(1562770536.172:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=477 comm="apparmor_parser"
- [ 11.768574] audit: type=1400 audit(1562770536.172:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=477 comm="apparmor_parser"
- [ 11.772090] audit: type=1400 audit(1562770536.176:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=474 comm="apparmor_parser"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement