%
(Header)
(Generated by gcodetools from Inkscape.)
(Using default header. To add your own header create file "header" in the output dir.)
M3
(Header end.)
G21 (All units in mm)

(Pass at depth -1.0)
(Start cutting path id: path135)
(Change tool to Default tool)

G00 Z5.000000
G00 X2666.956800 Y-1039.281615

G01 Z-0.125000 F100.0(Penetrate)
G01 X2666.956800 Y-1058.481615 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path135)

(Start cutting path id: path133)
(Change tool to Default tool)

G00 Z5.000000
G00 X2628.556800 Y-1000.881615

G01 Z-0.125000 F100.0(Penetrate)
G01 X2177.356800 Y-1000.881615 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path133)

(Start cutting path id: path131)
(Change tool to Default tool)

G00 Z5.000000
G00 X2138.956800 Y-1039.281615

G01 Z-0.125000 F100.0(Penetrate)
G01 X2138.956800 Y-1058.481615 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path131)

(Start cutting path id: path129)
(Change tool to Default tool)

G00 Z5.000000
G00 X2628.556800 Y-1096.881615

G01 Z-0.125000 F100.0(Penetrate)
G01 X2177.356800 Y-1096.881615 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path129)

(Start cutting path id: path127)
(Change tool to Default tool)

G00 Z5.000000
G00 X2188.665100 Y-1048.881615

G01 Z-0.125000 F100.0(Penetrate)
G03 X2186.993097 Y-1042.641615 Z-0.125000 I-12.480000 J-0.000000 F400.000000
G03 X2182.425100 Y-1038.073618 Z-0.125000 I-10.807997 J-6.240000
G03 X2176.185100 Y-1036.401615 Z-0.125000 I-6.240000 J-10.807997
G03 X2169.945100 Y-1038.073618 Z-0.125000 I0.000000 J-12.480000
G03 X2165.377103 Y-1042.641615 Z-0.125000 I6.240000 J-10.807997
G03 X2163.705100 Y-1048.881615 Z-0.125000 I10.807997 J-6.240000
G03 X2165.377103 Y-1055.121615 Z-0.125000 I12.480000 J0.000000
G03 X2169.945100 Y-1059.689612 Z-0.125000 I10.807997 J6.240000
G03 X2176.185100 Y-1061.361615 Z-0.125000 I6.240000 J10.807997
G03 X2182.425100 Y-1059.689612 Z-0.125000 I-0.000000 J12.480000
G03 X2186.993097 Y-1055.121615 Z-0.125000 I-6.240000 J10.807997
G03 X2188.665100 Y-1048.881615 Z-0.125000 I-10.807997 J6.240000
G01 X2188.665100 Y-1048.881615 Z-0.125000
G00 Z5.000000

(End cutting path id: path127)

(Start cutting path id: path125)
(Change tool to Default tool)

G00 Z5.000000
G00 X2642.208400 Y-1048.881615

G01 Z-0.125000 F100.0(Penetrate)
G03 X2640.536397 Y-1042.641615 Z-0.125000 I-12.480000 J-0.000000 F400.000000
G03 X2635.968400 Y-1038.073618 Z-0.125000 I-10.807997 J-6.240000
G03 X2629.728400 Y-1036.401615 Z-0.125000 I-6.240000 J-10.807997
G03 X2623.488400 Y-1038.073618 Z-0.125000 I0.000000 J-12.480000
G03 X2618.920403 Y-1042.641615 Z-0.125000 I6.240000 J-10.807997
G03 X2617.248400 Y-1048.881615 Z-0.125000 I10.807997 J-6.240000
G03 X2618.920403 Y-1055.121615 Z-0.125000 I12.480000 J0.000000
G03 X2623.488400 Y-1059.689612 Z-0.125000 I10.807997 J6.240000
G03 X2629.728400 Y-1061.361615 Z-0.125000 I6.240000 J10.807997
G03 X2635.968400 Y-1059.689612 Z-0.125000 I0.000000 J12.480000
G03 X2640.536397 Y-1055.121615 Z-0.125000 I-6.240000 J10.807997
G03 X2642.208400 Y-1048.881615 Z-0.125000 I-10.807997 J6.240000
G01 X2642.208400 Y-1048.881615 Z-0.125000
G00 Z5.000000

(End cutting path id: path125)

(Start cutting path id: path123)
(Change tool to Default tool)

G00 Z5.000000
G00 X2666.956800 Y-1039.281615

G01 Z-0.125000 F100.0(Penetrate)
G03 X2664.033774 Y-1024.586571 Z-0.125000 I-38.400000 J-0.000000 F400.000000
G03 X2655.709700 Y-1012.128715 Z-0.125000 I-35.476974 J-14.695044
G03 X2643.251844 Y-1003.804641 Z-0.125000 I-27.152900 J-27.152900
G03 X2628.556800 Y-1000.881615 Z-0.125000 I-14.695044 J-35.476974
G00 Z5.000000

(End cutting path id: path123)

(Start cutting path id: path121)
(Change tool to Default tool)

G00 Z5.000000
G00 X2177.356800 Y-1000.881615

G01 Z-0.125000 F100.0(Penetrate)
G03 X2162.661756 Y-1003.804641 Z-0.125000 I0.000000 J-38.400000 F400.000000
G03 X2150.203900 Y-1012.128715 Z-0.125000 I14.695044 J-35.476974
G03 X2141.879826 Y-1024.586571 Z-0.125000 I27.152900 J-27.152900
G03 X2138.956800 Y-1039.281615 Z-0.125000 I35.476974 J-14.695044
G00 Z5.000000

(End cutting path id: path121)

(Start cutting path id: path119)
(Change tool to Default tool)

G00 Z5.000000
G00 X2138.956800 Y-1058.481615

G01 Z-0.125000 F100.0(Penetrate)
G03 X2141.879826 Y-1073.176659 Z-0.125000 I38.400000 J-0.000000 F400.000000
G03 X2150.203900 Y-1085.634515 Z-0.125000 I35.476974 J14.695044
G03 X2162.661756 Y-1093.958589 Z-0.125000 I27.152900 J27.152900
G03 X2177.356800 Y-1096.881615 Z-0.125000 I14.695044 J35.476974
G00 Z5.000000

(End cutting path id: path119)

(Start cutting path id: path117)
(Change tool to Default tool)

G00 Z5.000000
G00 X2628.556800 Y-1096.881615

G01 Z-0.125000 F100.0(Penetrate)
G03 X2643.251844 Y-1093.958589 Z-0.125000 I-0.000000 J38.400000 F400.000000
G03 X2655.709700 Y-1085.634515 Z-0.125000 I-14.695044 J35.476974
G03 X2664.033774 Y-1073.176659 Z-0.125000 I-27.152900 J27.152900
G03 X2666.956800 Y-1058.481615 Z-0.125000 I-35.476974 J14.695044
G00 Z5.000000

(End cutting path id: path117)

(Start cutting path id: path115)
(Change tool to Default tool)

G00 Z5.000000
G00 X2690.514400 Y-733.547715

G01 Z-0.125000 F100.0(Penetrate)
G01 X2690.514400 Y-752.747715 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path115)

(Start cutting path id: path113)
(Change tool to Default tool)

G00 Z5.000000
G00 X2652.114400 Y-695.147715

G01 Z-0.125000 F100.0(Penetrate)
G01 X2200.914400 Y-695.147715 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path113)

(Start cutting path id: path111)
(Change tool to Default tool)

G00 Z5.000000
G00 X2162.514400 Y-733.547715

G01 Z-0.125000 F100.0(Penetrate)
G01 X2162.514400 Y-752.747715 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path111)

(Start cutting path id: path109)
(Change tool to Default tool)

G00 Z5.000000
G00 X2652.114400 Y-791.147715

G01 Z-0.125000 F100.0(Penetrate)
G01 X2200.914400 Y-791.147715 Z-0.125000 F400.000000
G00 Z5.000000

(End cutting path id: path109)

(Start cutting path id: path107)
(Change tool to Default tool)

G00 Z5.000000
G00 X2212.222800 Y-743.147715

G01 Z-0.125000 F100.0(Penetrate)
G03 X2210.550797 Y-736.907715 Z-0.125000 I-12.480000 J-0.000000 F400.000000
G03 X2205.982800 Y-732.339718 Z-0.125000 I-10.807997 J-6.240000
G03 X2199.742800 Y-730.667715 Z-0.125000 I-6.240000 J-10.807997
G03 X2193.502800 Y-732.339718 Z-0.125000 I0.000000 J-12.480000
G03 X2188.934803 Y-736.907715 Z-0.125000 I6.240000 J-10.807997
G03 X2187.262800 Y-743.147715 Z-0.125000 I10.807997 J-6.240000
G03 X2188.934803 Y-749.387715 Z-0.125000 I12.480000 J-0.000000
G03 X2193.502800 Y-753.955712 Z-0.125000 I10.807997 J6.240000
G03 X2199.742800 Y-755.627715 Z-0.125000 I6.240000 J10.807997
G03 X2205.982800 Y-753.955712 Z-0.125000 I0.000000 J12.480000
G03 X2210.550797 Y-749.387715 Z-0.125000 I-6.240000 J10.807997
G03 X2212.222800 Y-743.147715 Z-0.125000 I-10.807997 J6.240000
G01 X2212.222800 Y-743.147715 Z-0.125000
G00 Z5.000000

(End cutting path id: path107)

(Start cutting path id: path105)
(Change tool to Default tool)

G00 Z5.000000
G00 X2665.766100 Y-743.147715

G01 Z-0.125000 F100.0(Penetrate)
G03 X2664.094097 Y-736.907715 Z-0.125000 I-12.480000 J-0.000000 F400.000000
G03 X2659.526100 Y-732.339718 Z-0.125000 I-10.807997 J-6.240000
G03 X2653.286100 Y-730.667715 Z-0.125000 I-6.240000 J-10.807997
G03 X2647.046100 Y-732.339718 Z-0.125000 I0.000000 J-12.480000
G03 X2642.478103 Y-736.907715 Z-0.125000 I6.240000 J-10.807997
G03 X2640.806100 Y-743.147715 Z-0.125000 I10.807997 J-6.240000
G03 X2642.478103 Y-749.387715 Z-0.125000 I12.480000 J-0.000000
G03 X2647.046100 Y-753.955712 Z-0.125000 I10.807997 J6.240000
G03 X2653.286100 Y-755.627715 Z-0.125000 I6.240000 J10.807997
G03 X2659.526100 Y-753.955712 Z-0.125000 I0.000000 J12.480000
G03 X2664.094097 Y-749.387715 Z-0.125000 I-6.240000 J10.807997
G03 X2665.766100 Y-743.147715 Z-0.125000 I-10.807997 J6.240000
G01 X2665.766100 Y-743.147715 Z-0.125000
G00 Z5.000000

(End cutting path id: path105)

(Start cutting path id: path103)
(Change tool to Default tool)

G00 Z5.000000
G00 X2690.514400 Y-733.547715

G01 Z-0.125000 F100.0(Penetrate)
G03 X2687.591374 Y-718.852671 Z-0.125000 I-38.400000 J-0.000000 F400.000000
G03 X2679.267300 Y-706.394815 Z-0.125000 I-35.476974 J-14.695044
G03 X2666.809444 Y-698.070741 Z-0.125000 I-27.152900 J-27.152900
G03 X2652.114400 Y-695.147715 Z-0.125000 I-14.695044 J-35.476974
G00 Z5.000000

(End cutting path id: path103)

(Start cutting path id: path101)
(Change tool to Default tool)

G00 Z5.000000
G00 X2200.914400 Y-695.147715

G01 Z-0.125000 F100.0(Penetrate)
G03 X2186.219356 Y-698.070741 Z-0.125000 I0.000000 J-38.400000 F400.000000
G03 X2173.761500 Y-706.394815 Z-0.125000 I14.695044 J-35.476974
G03 X2165.437426 Y-718.852671 Z-0.125000 I27.152900 J-27.152900
G03 X2162.514400 Y-733.547715 Z-0.125000 I35.476974 J-14.695044
G00 Z5.000000

(End cutting path id: path101)

(Start cutting path id: path99)
(Change tool to Default tool)

G00 Z5.000000
G00 X2162.514400 Y-752.747715

G01 Z-0.125000 F100.0(Penetrate)
G03 X2165.437426 Y-767.442759 Z-0.125000 I38.400000 J-0.000000 F400.000000
G03 X2173.761500 Y-779.900615 Z-0.125000 I35.476974 J14.695044
G03 X2186.219356 Y-788.224689 Z-0.125000 I27.152900 J27.152900
G03 X2200.914400 Y-791.147715 Z-0.125000 I14.695044 J35.476974
G00 Z5.000000

(End cutting path id: path99)

(Start cutting path id: path97)
(Change tool to Default tool)

G00 Z5.000000
G00 X2652.114400 Y-791.147715

G01 Z-0.125000 F100.0(Penetrate)
G03 X2666.809444 Y-788.224689 Z-0.125000 I-0.000000 J38.400000 F400.000000
G03 X2679.267300 Y-779.900615 Z-0.125000 I-14.695044 J35.476974
G03 X2687.591374 Y-767.442759 Z-0.125000 I-27.152900 J27.152900
G03 X2690.514400 Y-752.747715 Z-0.125000 I-35.476974 J14.695044
G00 Z5.000000

(End cutting path id: path97)

(Start cutting path id: path95)
(Change tool to Default tool)

G00 Z5.000000
G00 X584.387420 Y-296.252915

G01 Z-0.125000 F100.0(Penetrate)
G03 X582.715417 Y-290.012915 Z-0.125000 I-12.480000 J-0.000000 F400.000000
G03 X578.147420 Y-285.444918 Z-0.125000 I-10.807997 J-6.240000
G03 X571.907420 Y-283.772915 Z-0.125000 I-6.240000 J-10.807997
G03 X565.667420 Y-285.444918 Z-0.125000 I-0.000000 J-12.480000
G03 X561.099423 Y-290.012915 Z-0.125000 I6.240000 J-10.807997
G03 X559.427420 Y-296.252915 Z-0.125000 I10.807997 J-6.240000
G03 X561.099423 Y-302.492915 Z-0.125000 I12.480000 J0.000000
G03 X565.667420 Y-307.060912 Z-0.125000 I10.807997 J6.240000
G03 X571.907420 Y-308.732915 Z-0.125000 I6.240000 J10.807997
G03 X578.147420 Y-307.060912 Z-0.125000 I0.000000 J12.480000
G03 X582.715417 Y-302.492915 Z-0.125000 I-6.240000 J10.807997
G03 X584.387420 Y-296.252915 Z-0.125000 I-10.807997 J6.240000
G01 X584.387420 Y-296.252915 Z-0.125000
G00 Z5.000000

(End cutting path id: path95)

(Start cutting path id: path93)
(Change tool to Default tool)

G00 Z5.000000
G00 X1336.223400 Y-296.252915

G01 Z-0.125000 F100.0(Penetrate)
G03 X1334.551397 Y-290.012915 Z-0.125000 I-12.480000 J-0.000000 F400.000000
G03 X1329.983400 Y-285.444918 Z-0.125000 I-10.807997 J-6.240000
G03 X1323.743400 Y-283.772915 Z-0.125000 I-6.240000 J-10.807997
G03 X1317.503400 Y-285.444918 Z-0.125000 I-0.000000 J-12.480000
G03 X1312.935403 Y-290.012915 Z-0.125000 I6.240000 J-10.807997
G03 X1311.263400 Y-296.252915 Z-0.125000 I10.807997 J-6.240000
G03 X1312.935403 Y-302.492915 Z-0.125000 I12.480000 J0.000000
G03 X1317.503400 Y-307.060912 Z-0.125000 I10.807997 J6.240000
G03 X1323.743400 Y-308.732915 Z-0.125000 I6.240000 J10.807997
G03 X1329.983400 Y-307.060912 Z-0.125000 I0.000000 J12.480000
G03 X1334.551397 Y-302.492915 Z-0.125000 I-6.240000 J10.807997
G03 X1336.223400 Y-296.252915 Z-0.125000 I-10.807997 J6.240000
G01 X1336.223400 Y-296.252915 Z-0.125000
G00 Z5.000000

(End cutting path id: path93)

(Start cutting path id: path91)
(Change tool to Default tool)

G00 Z5.000000
G00 X1656.927000 Y24.450685

G01 Z-0.125000 F100.0(Penetrate)
G03 X1655.254997 Y30.690685 Z-0.125000 I-12.480000 J0.000000 F400.000000
G03 X1650.687000 Y35.258682 Z-0.125000 I-10.807997 J-6.240000
G03 X1644.447000 Y36.930685 Z-0.125000 I-6.240000 J-10.807997
G03 X1638.207000 Y35.258682 Z-0.125000 I-0.000000 J-12.480000
G03 X1633.639003 Y30.690685 Z-0.125000 I6.240000 J-10.807997
G03 X1631.967000 Y24.450685 Z-0.125000 I10.807997 J-6.240000
G03 X1633.639003 Y18.210685 Z-0.125000 I12.480000 J0.000000
G03 X1638.207000 Y13.642688 Z-0.125000 I10.807997 J6.240000
G03 X1644.447000 Y11.970685 Z-0.125000 I6.240000 J10.807997
G03 X1650.687000 Y13.642688 Z-0.125000 I0.000000 J12.480000
G03 X1655.254997 Y18.210685 Z-0.125000 I-6.240000 J10.807997
G03 X1656.927000 Y24.450685 Z-0.125000 I-10.807997 J6.240000
G01 X1656.927000 Y24.450685 Z-0.125000
G00 Z5.000000

(End cutting path id: path91)

(Start cutting path id: path89)
(Change tool to Default tool)

G00 Z5.000000
G00 X263.683870 Y24.450685

G01 Z-0.125000 F100.0(Penetrate)
G03 X262.011867 Y30.690685 Z-0.125000 I-12.480000 J0.000000 F400.000000
G03 X257.443870 Y35.258682 Z-0.125000 I-10.807997 J-6.240000
G03 X251.203870 Y36.930685 Z-0.125000 I-6.240000 J-10.807997
G03 X244.963870 Y35.258682 Z-0.125000 I-0.000000 J-12.480000
G03 X240.395873 Y30.690685 Z-0.125000 I6.240000 J-10.807997
G03 X238.723870 Y24.450685 Z-0.125000 I10.807997 J-6.240000
G03 X240.395873 Y18.210685 Z-0.125000 I12.480000 J0.000000
G03 X244.963870 Y13.642688 Z-0.125000 I10.807997 J6.240000
G03 X251.203870 Y11.970685 Z-0.125000 I6.240000 J10.807997
G03 X257.443870 Y13.642688 Z-0.125000 I0.000000 J12.480000
G03 X262.011867 Y18.210685 Z-0.125000 I-6.240000 J10.807997
G03 X263.683870 Y24.450685 Z-0.125000 I-10.807997 J6.240000
G01 X263.683870 Y24.450685 Z-0.125000
G00 Z5.000000

(End cutting path id: path89)

(Start cutting path id: path87)
(Change tool to Default tool)

G00 Z5.000000
G00 X1525.711400 Y168.194205

G01 Z-0.125000 F100.0(Penetrate)
G03 X1522.432872 Y180.493890 Z-0.125000 I-24.566900 J0.038393 F400.000000
G03 X1513.439046 Y189.501782 Z-0.125000 I-21.288372 J-12.261292
G03 X1501.144500 Y192.799528 Z-0.125000 I-12.294546 J-21.269184
G03 X1488.849954 Y189.501782 Z-0.125000 I0.000000 J-24.566930
G03 X1479.856128 Y180.493890 Z-0.125000 I12.294546 J-21.269184
G03 X1476.577600 Y168.194205 Z-0.125000 I21.288372 J-12.261292
G03 X1479.856128 Y155.894520 Z-0.125000 I24.566900 J-0.038393
G03 X1488.849954 Y146.886628 Z-0.125000 I21.288372 J12.261292
G03 X1501.144500 Y143.588882 Z-0.125000 I12.294546 J21.269184
G03 X1513.439046 Y146.886628 Z-0.125000 I0.000000 J24.566930
G03 X1522.432872 Y155.894520 Z-0.125000 I-12.294546 J21.269184
G03 X1525.711400 Y168.194205 Z-0.125000 I-21.288372 J12.261292
G01 X1525.711400 Y168.194205 Z-0.125000
G00 Z5.000000

(End cutting path id: path87)

(Start cutting path id: path85)
(Change tool to Default tool)

G00 Z5.000000
G00 X972.392359 Y995.644255

G01 Z-0.125000 F100.0(Penetrate)
G03 X969.101015 Y1007.927720 Z-0.125000 I-24.566929 J0.000000 F400.000000
G03 X960.108895 Y1016.919840 Z-0.125000 I-21.275585 J-12.283464
G03 X947.825430 Y1020.211184 Z-0.125000 I-12.283464 J-21.275585
G03 X935.541965 Y1016.919840 Z-0.125000 I-0.000000 J-24.566929
G03 X926.549845 Y1007.927720 Z-0.125000 I12.283464 J-21.275584
G03 X923.258501 Y995.644255 Z-0.125000 I21.275583 J-12.283463
G03 X926.549846 Y983.360791 Z-0.125000 I24.566929 J-0.000000
G03 X935.541966 Y974.368670 Z-0.125000 I21.275585 J12.283464
G03 X947.825431 Y971.077326 Z-0.125000 I12.283465 J21.275585
G03 X960.108895 Y974.368670 Z-0.125000 I-0.000000 J24.566929
G03 X969.101015 Y983.360791 Z-0.125000 I-12.283464 J21.275585
G03 X972.392359 Y995.644255 Z-0.125000 I-21.275585 J12.283464
G01 X972.392360 Y995.644255 Z-0.125000
G00 Z5.000000

(End cutting path id: path85)

(Start cutting path id: path83)
(Change tool to Default tool)

G00 Z5.000000
G00 X419.073299 Y168.194205

G01 Z-0.125000 F100.0(Penetrate)
G03 X415.781955 Y180.477670 Z-0.125000 I-24.566929 J-0.000000 F400.000000
G03 X406.789835 Y189.469790 Z-0.125000 I-21.275585 J-12.283464
G03 X394.506370 Y192.761134 Z-0.125000 I-12.283464 J-21.275585
G03 X382.222906 Y189.469790 Z-0.125000 I0.000000 J-24.566929
G03 X373.230785 Y180.477670 Z-0.125000 I12.283464 J-21.275584
G03 X369.939442 Y168.194205 Z-0.125000 I21.275583 J-12.283463
G03 X373.230786 Y155.910741 Z-0.125000 I24.566929 J0.000000
G03 X382.222906 Y146.918620 Z-0.125000 I21.275585 J12.283464
G03 X394.506371 Y143.627276 Z-0.125000 I12.283465 J21.275585
G03 X406.789835 Y146.918620 Z-0.125000 I-0.000000 J24.566929
G03 X415.781955 Y155.910741 Z-0.125000 I-12.283465 J21.275585
G03 X419.073300 Y168.194205 Z-0.125000 I-21.275585 J12.283464
G01 X419.073300 Y168.194205 Z-0.125000
G00 Z5.000000

(End cutting path id: path83)

(Start cutting path id: path81)
(Change tool to Default tool)

G00 Z5.000000
G00 X1680.447000 Y24.450685

G01 Z-0.125000 F100.0(Penetrate)
G03 X1675.623915 Y42.450685 Z-0.125000 I-36.000000 J0.000000 F400.000000
G03 X1662.447000 Y55.627600 Z-0.125000 I-31.176915 J-18.000000
G03 X1644.447000 Y60.450685 Z-0.125000 I-18.000000 J-31.176915
G03 X1626.447000 Y55.627600 Z-0.125000 I-0.000000 J-36.000000
G03 X1613.270085 Y42.450685 Z-0.125000 I18.000000 J-31.176915
G03 X1608.447000 Y24.450685 Z-0.125000 I31.176915 J-18.000000
G03 X1613.270085 Y6.450685 Z-0.125000 I36.000000 J0.000000
G03 X1626.447000 Y-6.726229 Z-0.125000 I31.176915 J18.000000
G03 X1644.447000 Y-11.549315 Z-0.125000 I18.000000 J31.176915
G03 X1662.447000 Y-6.726229 Z-0.125000 I0.000000 J36.000000
G03 X1675.623915 Y6.450685 Z-0.125000 I-18.000000 J31.176915
G03 X1680.447000 Y24.450685 Z-0.125000 I-31.176915 J18.000000
G01 X1680.447000 Y24.450685 Z-0.125000
G00 Z5.000000

(End cutting path id: path81)

(Start cutting path id: path79)
(Change tool to Default tool)

G00 Z5.000000
G00 X1359.743400 Y-296.252915

G01 Z-0.125000 F100.0(Penetrate)
G03 X1354.920315 Y-278.252915 Z-0.125000 I-36.000000 J0.000000 F400.000000
G03 X1341.743400 Y-265.076000 Z-0.125000 I-31.176915 J-18.000000
G03 X1323.743400 Y-260.252915 Z-0.125000 I-18.000000 J-31.176915
G03 X1305.743400 Y-265.076000 Z-0.125000 I0.000000 J-36.000000
G03 X1292.566485 Y-278.252915 Z-0.125000 I18.000000 J-31.176915
G03 X1287.743400 Y-296.252915 Z-0.125000 I31.176915 J-18.000000
G03 X1292.566485 Y-314.252915 Z-0.125000 I36.000000 J-0.000000
G03 X1305.743400 Y-327.429829 Z-0.125000 I31.176915 J18.000000
G03 X1323.743400 Y-332.252915 Z-0.125000 I18.000000 J31.176915
G03 X1341.743400 Y-327.429829 Z-0.125000 I0.000000 J36.000000
G03 X1354.920315 Y-314.252915 Z-0.125000 I-18.000000 J31.176915
G03 X1359.743400 Y-296.252915 Z-0.125000 I-31.176915 J18.000000
G01 X1359.743400 Y-296.252915 Z-0.125000
G00 Z5.000000

(End cutting path id: path79)

(Start cutting path id: path77)
(Change tool to Default tool)

G00 Z5.000000
G00 X287.203870 Y24.450685

G01 Z-0.125000 F100.0(Penetrate)
G03 X282.380785 Y42.450685 Z-0.125000 I-36.000000 J0.000000 F400.000000
G03 X269.203870 Y55.627600 Z-0.125000 I-31.176915 J-18.000000
G03 X251.203870 Y60.450685 Z-0.125000 I-18.000000 J-31.176915
G03 X233.203870 Y55.627600 Z-0.125000 I0.000000 J-36.000000
G03 X220.026955 Y42.450685 Z-0.125000 I18.000000 J-31.176915
G03 X215.203870 Y24.450685 Z-0.125000 I31.176915 J-18.000000
G03 X220.026955 Y6.450685 Z-0.125000 I36.000000 J0.000000
G03 X233.203870 Y-6.726229 Z-0.125000 I31.176915 J18.000000
G03 X251.203870 Y-11.549315 Z-0.125000 I18.000000 J31.176915
G03 X269.203870 Y-6.726229 Z-0.125000 I-0.000000 J36.000000
G03 X282.380785 Y6.450685 Z-0.125000 I-18.000000 J31.176915
G03 X287.203870 Y24.450685 Z-0.125000 I-31.176915 J18.000000
G01 X287.203870 Y24.450685 Z-0.125000
G00 Z5.000000

(End cutting path id: path77)

(Start cutting path id: path75)
(Change tool to Default tool)

G00 Z5.000000
G00 X607.907420 Y-296.252915

G01 Z-0.125000 F100.0(Penetrate)
G03 X603.084335 Y-278.252915 Z-0.125000 I-36.000000 J0.000000 F400.000000
G03 X589.907420 Y-265.076000 Z-0.125000 I-31.176915 J-18.000000
G03 X571.907420 Y-260.252915 Z-0.125000 I-18.000000 J-31.176915
G03 X553.907420 Y-265.076000 Z-0.125000 I0.000000 J-36.000000
G03 X540.730505 Y-278.252915 Z-0.125000 I18.000000 J-31.176915
G03 X535.907420 Y-296.252915 Z-0.125000 I31.176915 J-18.000000
G03 X540.730505 Y-314.252915 Z-0.125000 I36.000000 J-0.000000
G03 X553.907420 Y-327.429829 Z-0.125000 I31.176915 J18.000000
G03 X571.907420 Y-332.252915 Z-0.125000 I18.000000 J31.176915
G03 X589.907420 Y-327.429829 Z-0.125000 I0.000000 J36.000000
G03 X603.084335 Y-314.252915 Z-0.125000 I-18.000000 J31.176915
G03 X607.907420 Y-296.252915 Z-0.125000 I-31.176915 J18.000000
G01 X607.907420 Y-296.252915 Z-0.125000
G00 Z5.000000

(End cutting path id: path75)

(Start cutting path id: path73)
(Change tool to Default tool)

G00 Z5.000000
G00 X1091.825400 Y400.368665

G01 Z-0.125000 F100.0(Penetrate)
G03 X1072.554976 Y472.396441 Z-0.125000 I-143.999985 J0.065727 F400.000000
G03 X1019.844388 Y525.131094 Z-0.125000 I-124.729561 J-71.962049
G03 X947.825415 Y544.434392 Z-0.125000 I-72.018973 J-124.696702
G03 X875.806442 Y525.131094 Z-0.125000 I-0.000000 J-144.000000
G03 X823.095854 Y472.396441 Z-0.125000 I72.018973 J-124.696702
G03 X803.825430 Y400.368665 Z-0.125000 I124.729561 J-71.962049
G03 X823.095854 Y328.340889 Z-0.125000 I143.999985 J-0.065727
G03 X875.806442 Y275.606236 Z-0.125000 I124.729561 J71.962049
G03 X947.825415 Y256.302938 Z-0.125000 I72.018973 J124.696702
G03 X1019.844388 Y275.606236 Z-0.125000 I-0.000000 J144.000000
G03 X1072.554976 Y328.340889 Z-0.125000 I-72.018973 J124.696702
G03 X1091.825400 Y400.368665 Z-0.125000 I-124.729561 J71.962049
G01 X1091.825400 Y400.368665 Z-0.125000
G00 Z5.000000

(End cutting path id: path73)

(Start cutting path id: path71)
(Change tool to Default tool)

G00 Z5.000000
G00 X1811.825400 Y400.368665

G01 Z-0.125000 F100.0(Penetrate)
G03 X1696.126784 Y832.438938 Z-0.125000 I-863.999984 J0.166277 F400.000000
G03 X1379.873415 Y1148.753176 Z-0.125000 I-748.301368 J-431.903996
G03 X947.825416 Y1264.534942 Z-0.125000 I-432.047999 J-748.218235
G03 X515.777417 Y1148.753176 Z-0.125000 I-0.000000 J-864.000000
G03 X199.524048 Y832.438938 Z-0.125000 I432.047999 J-748.218235
G03 X83.825432 Y400.368665 Z-0.125000 I748.301368 J-431.903996
G03 X199.524048 Y-31.701608 Z-0.125000 I863.999984 J-0.166277
G03 X515.777417 Y-348.015846 Z-0.125000 I748.301368 J431.903996
G03 X947.825416 Y-463.797612 Z-0.125000 I432.047999 J748.218235
G03 X1379.873415 Y-348.015846 Z-0.125000 I0.000000 J864.000000
G03 X1696.126784 Y-31.701608 Z-0.125000 I-432.047999 J748.218235
G03 X1811.825400 Y400.368665 Z-0.125000 I-748.301368 J431.903996
G01 X1811.825400 Y400.368665 Z-0.125000
G00 Z5.000000

(End cutting path id: path71)


(Footer)
M5
G00 X0.0000 Y0.0000
M2
(Using default footer. To add your own footer create file "footer" in the output dir.)
(end)
%