login as: root
root@pntcpu1u:~# dmesg
Booting Linux on physical CPU 0x0
Linux version 4.9.36-00619-g7e82b52ca228-dirty (alexs@alexs-mint) (gcc version 5.2.0 (GCC) ) #1 Tue Aug 6 16:08:22 MSK 2019
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
CPU: VIVT data cache, VIVT instruction cache
OF: fdt:Machine model: Profitt PS887
cma: Reserved 16 MiB at 0x72c00000
Memory policy: Data cache writeback
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c05cd364, node_mem_map c3f72000
  Normal zone: 128 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 16384 pages, LIFO batch:3
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,4M(kernel),256k(dtb),-(root) ubi.mtd=6 rootfstype=ubifs root=ubi0:ps887-rootfs rw
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 42296K/65536K available (4376K kernel code, 158K rwdata, 1048K rodata, 196K init, 173K bss, 6856K reserved, 16384K cma-reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc4800000 - 0xff800000   ( 944 MB)
    lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc044e5b8   (4378 kB)
      .init : 0xc0575000 - 0xc05a6000   ( 196 kB)
      .data : 0xc05a6000 - 0xc05cdb40   ( 159 kB)
       .bss : 0xc05cdb40 - 0xc05f90e4   ( 174 kB)
NR_IRQS:16 nr_irqs:16 16
clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 7167226906 ns
sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777215996093750ns
Console: colour dummy device 80x30
Calibrating delay loop... 198.76 BogoMIPS (lpj=775168)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x70008400 - 0x7000847c
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 14931722236523437 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
AT91: Detected SoC family: at91sam9g45
AT91: Detected SoC: at91sam9g45, revision 2
gpio-at91 fffff200.gpio: at address c481c200
gpio-at91 fffff400.gpio: at address c481e400
gpio-at91 fffff600.gpio: at address c4831600
gpio-at91 fffff800.gpio: at address c4833800
gpio-at91 fffffa00.gpio: at address c4835a00
pinctrl-at91 ahb:apb:pinctrl@fffff200: initialized AT91 pinctrl driver
tcb_clksrc: tc0 at 16.166 MHz
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 114675631333 ns
at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy set slave sg-cpy ), 8 channels
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
at91_i2c fff84000.i2c: can't get DMA channel, continue without DMA support
at91_i2c fff84000.i2c: AT91 i2c bus driver (hw version: 0x302).
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource tcb_clksrc
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=14 bucket_order=0
io scheduler noop registered (default)
ffffee00.serial: ttyS0 at MMIO 0xffffee00 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL
console [ttyS0] enabled
fff94000.serial: ttyS3 at MMIO 0xfff94000 (irq = 23, base_baud = 8333333) is a ATMEL_SERIAL
fff98000.serial: ttyS4 at MMIO 0xfff98000 (irq = 24, base_baud = 8333333) is a ATMEL_SERIAL
brd: module loaded
loop: module loaded
atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers.
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
nand: Micron MT29F1G08ABAEAWP
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
atmel_nand 40000000.nand: Use On Flash BBT
nand: WARNING: 40000000.nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
7 cmdlinepart partitions found on MTD device atmel_nand
Creating 7 MTD partitions on "atmel_nand":
0x000000000000-0x000000020000 : "bootstrap"
0x000000020000-0x000000060000 : "uboot"
0x000000060000-0x000000080000 : "env1"
0x000000080000-0x0000000a0000 : "env2"
0x0000000a0000-0x0000004a0000 : "kernel"
0x0000004a0000-0x0000004e0000 : "dtb"
0x0000004e0000-0x000008000000 : "root"
atmel_spi fffa4000.spi: version: 0x210
atmel_spi fffa4000.spi: Atmel SPI Controller at 0xfffa4000 (irq 29)
libphy: Fixed MDIO Bus: probed
libphy: MACB_mii_bus: probed
NatSemi DP83640 fffbc000.etherne:01: attached PHY driver [NatSemi DP83640] (mii_bus:phy_addr=fffbc000.etherne:01, irq=-1)
macb fffbc000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xfffbc000 irq 25 (70:b3:d5:09:19:86)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-atmel: EHCI Atmel driver
atmel-ehci 800000.ehci: EHCI Host Controller
atmel-ehci 800000.ehci: new USB bus registered, assigned bus number 1
atmel-ehci 800000.ehci: irq 30, io mem 0x00800000
atmel-ehci 800000.ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.36-00619-g7e82b52ca228-dirty ehci_hcd
usb usb1: SerialNumber: 800000.ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-atmel: OHCI Atmel driver
at91_ohci 700000.ohci: failed to find sfr node
at91_ohci 700000.ohci: USB Host Controller
at91_ohci 700000.ohci: new USB bus registered, assigned bus number 2
at91_ohci 700000.ohci: irq 30, io mem 0x00700000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: USB Host Controller
usb usb2: Manufacturer: Linux 4.9.36-00619-g7e82b52ca228-dirty ohci_hcd
usb usb2: SerialNumber: at91
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ch341
usbserial: USB Serial support registered for ch341-uart
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver usb_serial_simple
usbserial: USB Serial support registered for carelink
usbserial: USB Serial support registered for zio
usbserial: USB Serial support registered for funsoft
usbserial: USB Serial support registered for flashloader
usbserial: USB Serial support registered for google
usbserial: USB Serial support registered for vivopay
usbserial: USB Serial support registered for moto_modem
usbserial: USB Serial support registered for novatel_gps
usbserial: USB Serial support registered for hp4x
usbserial: USB Serial support registered for suunto
usbserial: USB Serial support registered for siemens_mpi
usbcore: registered new interface driver usbtest
i2c /dev entries driver
AT91: Starting after wakeup
at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0)
ledtrig-cpu: registered to indicate activity on CPUs
iio iio:device0: Resolution used: 10 bits
iio iio:device0: ADC Touch screen is disabled.
NET: Registered protocol family 10
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
ubi0: default fastmap pool size: 45
ubi0: default fastmap WL pool size: 22
ubi0: attaching mtd6
random: fast init done
ubi0: scanning is finished
ubi0: attached mtd6 (name "root", size 123 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 981, bad PEBs: 4, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1532495239
ubi0: available PEBs: 0, total reserved PEBs: 981, PEBs reserved for bad PEB handling: 16
ubi0: background thread "ubi_bgt0d" started, PID 68
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 69
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ps887-rootfs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 120373248 bytes (114 MiB, 948 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 1443F83C-2DDC-4439-81EB-3C00EF854E0D, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 196K (c0575000 - c05a6000)
This architecture does not have kernel memory protection.
usb 2-2: new full-speed USB device number 2 using at91_ohci
usb 2-2: New USB device found, idVendor=0451, idProduct=2046
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
udevd[99]: starting version 182
usb 2-2.1: new full-speed USB device number 3 using at91_ohci
usb 2-2.1: New USB device found, idVendor=03eb, idProduct=2122
usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.1: Product: PROFNEXT
usb 2-2.1: Manufacturer: PROFITT
cdc_acm 2-2.1:1.0: ttyACM0: USB ACM device
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb fffbc000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
cdc_acm 2-2.1:1.0: failed to set dtr/rts
usb 2-2.1: USB disconnect, device number 3
usb 2-2: reset full-speed USB device number 2 using at91_ohci
usb 2-2.1: new full-speed USB device number 4 using at91_ohci
usb 2-2.1: New USB device found, idVendor=03eb, idProduct=2122
usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.1: Product: PROFNEXT
usb 2-2.1: Manufacturer: PROFITT
cdc_acm 2-2.1:1.0: ttyACM0: USB ACM device
random: crng init done
root@pntcpu1u:~#