config_xineliboutput

#
# xine config file
#
.version:2

# Entries which are still set to their default values are commented out.
# Remove the '#' at the beginning of the line, if you want to change them.

# Use unscaled OSD
# bool, default: 0
#gui.osd_use_unscaled:0

gui.experience_level:Master of the known universe

gui.panel_visible:0

gui.setup_x:888

gui.setup_y:56

gui.splash:0

# palette (foreground-border-background) to use for subtitles and OSD
# { white-black-transparent  white-none-transparent  white-none-translucid  yellow-black-transparent }, default: 0
#ui.osd.text_palette:white-black-transparent

# notify changes to the hardware mixer
# bool, default: 1
#audio.alsa_hw_mixer:1

# device used for mono output
# string, default: default
#audio.device.alsa_default_device:default

# device used for stereo output
# string, default: plug:front:default
audio.device.alsa_front_device:default

# alsa mixer device
# string, default: PCM
#audio.device.alsa_mixer_name:PCM

# sound card can do mmap
# bool, default: 0
audio.device.alsa_mmap_enable:1

# device used for 5.1-channel output
# string, default: iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
#audio.device.alsa_passthrough_device:iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2

# device used for 4-channel output
# string, default: plug:surround40:0
#audio.device.alsa_surround40_device:plug:surround40:0

# device used for 5.1-channel output
# string, default: plug:surround51:0
#audio.device.alsa_surround51_device:plug:surround51:0

# speaker arrangement
# { Mono 1.0  Stereo 2.0  Headphones 2.0  Stereo 2.1  Surround 3.0  Surround 4.0  Surround 4.1  Surround 5.0  Surround 5.1  Surround 6.0  Surround 6.1  Surround 7.1  Pass Through }, default: 1
#audio.output.speaker_arrangement:Stereo 2.0

# offset for digital passthrough
# numeric, default: 0
#audio.synchronization.passthrough_offset:0

# play audio even on slow/fast speeds
# bool, default: 0
#audio.synchronization.slow_fast_audio:0

# method to sync audio and video
# { metronom feedback  resample }, default: 0
audio.synchronization.av_sync_method:resample

# always resample to this rate (0 to disable)
# numeric, default: 0
#audio.synchronization.force_rate:0

# enable resampling
# { auto  off  on }, default: 0
#audio.synchronization.resample_mode:auto

# startup audio volume
# [0..100], default: 50
#audio.volume.mixer_volume:50

# restore volume level at startup
# bool, default: 0
#audio.volume.remember_volume:0

video.driver:vdpau

# disable all video scaling
# bool, default: 0
#video.output.disable_scaling:0

# horizontal image position in the output window
# [0..100], default: 50
#video.output.horizontal_position:50

# vdpau: color of none video area in output window
# numeric, default: 0
#video.output.vdpau_background_color:0

# vdpau: Try to recreate progressive frames from pulldown material
# bool, default: 1
#video.output.vdpau_enable_inverse_telecine:1

video.output.vdpau_skip_chroma_deinterlace:1
video.output.vdpau_display_queue_length:4
video.output.vdpau_sd_only_properties:noise+sharpness

# vdpau: HD deinterlace method
# { bob  half temporal  half temporal_spatial  temporal  temporal_spatial }, default: 3
#video.output.vdpau_hd_deinterlace_method:temporal

# vdpau: disable deinterlacing when progressive_frame flag is set
# bool, default: 0
video.output.vdpau_honor_progressive:1

# vdpau: SD deinterlace method
# { bob  half temporal  half temporal_spatial  temporal  temporal_spatial }, default: 3
video.output.vdpau_sd_deinterlace_method:temporal_spatial

# vdpau: disable advanced deinterlacers chroma filter
# bool, default: 0
#video.output.vdpau_skip_chroma_deinterlace:0

# vdpau: disable studio level
# bool, default: 0
#video.output.vdpau_studio_levels:0

# vertical image position in the output window
# [0..100], default: 50
#video.output.vertical_position:50

# Choose speed over specification compliance
# bool, default: 0
video.processing.ffmpeg_choose_speed_over_accuracy:1

# MPEG-4 postprocessing quality
# [0..6], default: 3
video.processing.ffmpeg_pp_quality:0

# Skip loop filter
# { default  none  nonref  bidir  nonkey  all }, default: 0
video.processing.ffmpeg_skip_loop_filter:all

# FFmpeg video decoding thread count
# numeric, default: 1
video.processing.ffmpeg_thread_count:2

# device used for CD audio
# string, default: /dev/cdrom
#media.audio_cd.device:/dev/cdrom

# slow down disc drive to this speed factor
# numeric, default: 4
#media.audio_cd.drive_slowdown:4

# query CDDB
# bool, default: 1
#media.audio_cd.use_cddb:1

# CDDB server port
# numeric, default: 8880
#media.audio_cd.cddb_port:8880

# CDDB server name
# string, default: freedb.freedb.org
#media.audio_cd.cddb_server:freedb.freedb.org

# directory for saving streams
# string, default:
#media.capture.save_dir:

# Number of dvb card to use.
# numeric, default: 0
#media.dvb.adapter:0

# Remember last DVB channel watched
# bool, default: 1
#media.dvb.remember_channel:1

# Number of seconds until tuning times out.
# numeric, default: 0
#media.dvb.tuning_timeout:0

# Enable the DVB GUI
# bool, default: 1
#media.dvb.gui_enabled:1

# Last DVB channel viewed
# numeric, default: -1
#media.dvb.last_channel:-1

# default language for DVD playback
# string, default: en
media.dvd.language:fi

# region the DVD player claims to be in (1 to 8)
# numeric, default: 1
#media.dvd.region:1

# device used for DVD playback
# string, default: /dev/dvd
#media.dvd.device:/dev/dvd

# raw device set up for DVD access
# string, default: /dev/rdvd
#media.dvd.raw_device:/dev/rdvd

# read-ahead caching
# bool, default: 1
#media.dvd.readahead:1

# CSS decryption method
# { key  disc  title }, default: 0
#media.dvd.css_decryption_method:key

# play mode when title/chapter is given
# { entire dvd  one chapter }, default: 0
#media.dvd.play_single_chapter:entire dvd

# unit for seeking
# { seek in program chain  seek in program }, default: 0
#media.dvd.seek_behaviour:seek in program chain

# unit for the skip action
# { skip program  skip part  skip title }, default: 0
#media.dvd.skip_behaviour:skip program

# file browsing start location
# string, default: /
#media.files.origin_path:/

# list hidden files
# bool, default: 0
#media.files.show_hidden_files:0

# network bandwidth
# { 14.4 Kbps (Modem)  19.2 Kbps (Modem)  28.8 Kbps (Modem)  33.6 Kbps (Modem)  34.4 Kbps (Modem)  57.6 Kbps (Modem)  115.2 Kbps (ISDN)  262.2 Kbps (Cable/DSL)  393.2 Kbps (Cable/DSL)  524.3 Kbps (Cable/DSL) }, default: 10

# Timeout for network stream reading (in seconds)
# numeric, default: 30
#media.network.timeout:30

# Domains for which to ignore the HTTP proxy
# string, default:
#media.network.http_no_proxy:

# HTTP proxy host
# string, default:
#media.network.http_proxy_host:

# HTTP proxy password
# string, default:
#media.network.http_proxy_password:

# HTTP proxy port
# numeric, default: 80
#media.network.http_proxy_port:80

# HTTP proxy username
# string, default:
#media.network.http_proxy_user:

# MMS protocol
# { auto  TCP  HTTP }, default: 0
#media.network.mms_protocol:auto

# default VDR host
# string, default: xvdr://127.0.0.1#nocache;demux:mpeg_block
#media.xvdr.default_mrl:xvdr://127.0.0.1#nocache;demux:mpeg_block

# Fast (low-quality) OSD scaling
# bool, default: 0
#media.xvdr.fast_osd_scaling:0

# number of buffers for HD content
# numeric, default: 2500
media.xvdr.num_buffers_hd:4000

# SCR-Treshold for HD-Playback (%)
# numeric, default: 40
#media.xvdr.scr_treshold_hd:40

# SCR-Treshold for SD-Playback (%)
# numeric, default: 50
#media.xvdr.scr_treshold_sd:50

# SRC tuning step
# numeric, default: 5000
media.xvdr.scr_tuning_step:150

# Smoother SRC tuning
# bool, default: 0
#media.xvdr.smooth_scr_tuning:0

# opacity for the black parts of bitmapped subtitles
# [0..100], default: 67
#subtitles.bitmap.black_opacity:67

# opacity for the colour parts of bitmapped subtitles
# [0..100], default: 100
#subtitles.bitmap.colour_opacity:100

# subtitle size
# { tiny  small  normal  large  very large  huge }, default: 1
subtitles.separate.subtitle_size:large

# subtitle vertical offset
# numeric, default: 0
#subtitles.separate.vertical_offset:0

# font for subtitles
# string, default: sans
#subtitles.separate.font:sans

# font for subtitles
# string, default:
#subtitles.separate.font_freetype:

# whether to use a freetype font
# bool, default: 0
#subtitles.separate.font_use_freetype:0

# encoding of the subtitles
# string, default: iso-8859-1
#subtitles.separate.src_encoding:iso-8859-1

# use unscaled OSD if possible
# bool, default: 1
#subtitles.separate.use_unscaled_osd:1

# frames per second to generate
# numeric, default: 14
#effects.goom.fps:14

# goom image height
# numeric, default: 240
#effects.goom.height:240

# goom image width
# numeric, default: 320
#effects.goom.width:320

# colour space conversion method
# { Fast but not photorealistic  Slow but looks better }, default: 0
#effects.goom.csc_method:Fast but not photorealistic

# number of audio buffers
# numeric, default: 230
engine.buffers.audio_num_buffers:500

# number of video buffers
# numeric, default: 500
engine.buffers.video_num_buffers:2500

# default number of video frames
# numeric, default: 15
engine.buffers.video_num_frames:50

# priority for bitplane decoder
# numeric, default: 0
#engine.decoder_priorities.bitplane:0

# priority for dts decoder
# numeric, default: 0
#engine.decoder_priorities.dts:0

# priority for dvaudio decoder
# numeric, default: 0
#engine.decoder_priorities.dvaudio:0

# priority for ffmpeg-wmv8 decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv8:0

# priority for ffmpeg-wmv9 decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv9:0

# priority for ffmpegaudio decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpegaudio:0

# priority for ffmpegvideo decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpegvideo:0

# priority for gsm610 decoder
# numeric, default: 0
#engine.decoder_priorities.gsm610:0

# priority for image decoder
# numeric, default: 0
#engine.decoder_priorities.image:0

# priority for mad decoder
# numeric, default: 0
#engine.decoder_priorities.mad:0

# priority for mpeg2 decoder
# numeric, default: 0
#engine.decoder_priorities.mpeg2:0

# priority for nsfdec decoder
# numeric, default: 0
#engine.decoder_priorities.nsfdec:0

# priority for pcm decoder
# numeric, default: 0
#engine.decoder_priorities.pcm:0

# priority for rgb decoder
# numeric, default: 0
#engine.decoder_priorities.rgb:0

# priority for spucc decoder
# numeric, default: 0
#engine.decoder_priorities.spucc:0

# priority for spucmml decoder
# numeric, default: 0
#engine.decoder_priorities.spucmml:0

# priority for spudec decoder
# numeric, default: 0
#engine.decoder_priorities.spudec:0

# priority for spudvb decoder
# numeric, default: 0
#engine.decoder_priorities.spudvb:0

# priority for spuhdmv decoder
# numeric, default: 0
#engine.decoder_priorities.spuhdmv:0

# priority for sputext decoder
# numeric, default: 0
#engine.decoder_priorities.sputext:0

# priority for vdpau_h264 decoder
# numeric, default: 0
#engine.decoder_priorities.vdpau_h264:0

# priority for vdpau_mpeg12 decoder
# numeric, default: 0
engine.decoder_priorities.vdpau_mpeg12:1

# priority for vdpau_mpeg4 decoder
# numeric, default: 0
#engine.decoder_priorities.vdpau_mpeg4:0

# priority for vdpau_vc1 decoder
# numeric, default: 0
#engine.decoder_priorities.vdpau_vc1:0

# priority for yuv decoder
# numeric, default: 0
#engine.decoder_priorities.yuv:0

# media format detection strategy
# { default  reverse  content  extension }, default: 0
#engine.demux.strategy:default

# memcopy method used by xine
# { probe  libc  kernel  mmx  mmxext  sse }, default: 0
#engine.performance.memcpy_method:libc
engine.performance.memcpy_method:sse

# percentage of discarded frames to tolerate
# numeric, default: 10
#engine.performance.warn_discarded_threshold:10

# percentage of skipped frames to tolerate
# numeric, default: 10
#engine.performance.warn_skipped_threshold:10

# allow implicit changes to the configuration (e.g. by MRL)
# bool, default: 0
#misc.implicit_config:0