Advertisement
Guest User

Centos 7 on Marvell Armada 8040 MacchiatoBin board

a guest
Sep 29th, 2017
133
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 45.64 KB | None | 0 0
  1.  
  2.  
  3. CentOS Linux (4.11.0-22.el7a.aarch64) 7 (AltArch)
  4. CentOS Linux (0-rescue-1e61de85515845b5890bccdb5d3fdb56) 7 (AltArch)
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19. Use the ^ and v keys to change the selection.
  20. Press 'e' to edit the selected item, or 'c' for a command prompt.
  21. The selected entry will be started automatically in 0s.
  22.  
  23.  
  24.  
  25.  
  26.  
  27.  
  28.  
  29.  
  30.  
  31.  
  32.  
  33.  
  34.  
  35.  
  36.  
  37.  
  38.  
  39.  
  40.  
  41.  
  42.  
  43.  
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  
  50.  
  51.  
  52.  
  53.  
  54.  
  55.  
  56.  
  57.  
  58.  
  59.  
  60.  
  61.  
  62.  
  63.  
  64.  
  65.  
  66.  
  67.  
  68.  
  69.  
  70.  
  71.  
  72.  
  73.  
  74.  
  75.  
  76.  
  77.  
  78.  
  79.  
  80.  
  81.  
  82.  
  83.  
  84.  
  85.  
  86.  
  87.  
  88.  
  89.  
  90.  
  91.  
  92.  
  93.  
  94.  
  95.  
  96.  
  97.  
  98.  
  99.  
  100.  
  101.  
  102.  
  103.  
  104.  
  105.  
  106.  
  107.  
  108.  
  109.  
  110.  
  111.  
  112.  
  113.  
  114.  
  115.  
  116.  
  117.  
  118.  
  119.  
  120.  
  121. EFI stub: Booting Linux Kernel...
  122. EFI stub: Using DTB from configuration table
  123. EFI stub: Exiting boot services and installing virtual address map...
  124. [ 0.000000] Booting Linux on physical CPU 0x0
  125. [ 0.000000] Linux version 4.11.0-22.el7a.aarch64 (mockbuild@apmb0.centos.lab) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Sun Sep 3 13:39:10 CDT 2017
  126. [ 0.000000] Boot CPU: AArch64 Processor [410fd081]
  127. [ 0.000000] efi: Getting EFI parameters from FDT:
  128. [ 0.000000] efi: EFI v2.60 by EDK II
  129. [ 0.000000] efi: SMBIOS 3.0=0xbfda0000 ACPI 2.0=0xb6760000 MEMATTR=0xb7164698 RNG=0xbffdf098
  130. [ 0.000000] cma: Reserved 512 MiB at 0x0000000080000000
  131. [ 0.000000] ACPI: Early table checksum verification disabled
  132. [ 0.000000] ACPI: RSDP 0x00000000B6760000 000024 (v02 MVEBU )
  133. [ 0.000000] ACPI: XSDT 0x00000000B6750000 000044 (v01 MVEBU ARMADA8K 00000000 01000013)
  134. [ 0.000000] ACPI: FACP 0x00000000B6730000 000114 (v06 MVEBU ARMADA8K 00000000 LNRO 00000000)
  135. [ 0.000000] ACPI: DSDT 0x00000000B6740000 0002AB (v02 MVEBU ARMADA8K 00000003 INTL 20131115)
  136. [ 0.000000] ACPI: GTDT 0x00000000B6720000 00007C (v02 MVEBU ARMADA8K 00000000 LNRO 00000000)
  137. [ 0.000000] ACPI: APIC 0x00000000B6710000 0001E4 (v04 MVEBU ARMADA8K 00000000 LNRO 00000000)
  138. [ 0.000000] ACPI: SPCR 0x00000000B6700000 000050 (v02 MVEBU ARMADA8K 00000000 LNRO 00000000)
  139. [ 0.000000] ACPI: SPCR: console: uart,mmio,0xf0512000,115200
  140. [ 0.000000] ACPI: NUMA: Failed to initialise from firmware
  141. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
  142. [ 0.000000] NUMA: Adding memblock [0x0 - 0x3ffffff] on node 0
  143. [ 0.000000] NUMA: Adding memblock [0x4200000 - 0xb66fffff] on node 0
  144. [ 0.000000] NUMA: Adding memblock [0xb6700000 - 0xb676ffff] on node 0
  145. [ 0.000000] NUMA: Adding memblock [0xb6770000 - 0xbf80ffff] on node 0
  146. [ 0.000000] NUMA: Adding memblock [0xbf810000 - 0xbfbeffff] on node 0
  147. [ 0.000000] NUMA: Adding memblock [0xbfbf0000 - 0xbfd5ffff] on node 0
  148. [ 0.000000] NUMA: Adding memblock [0xbfd60000 - 0xbffdffff] on node 0
  149. [ 0.000000] NUMA: Adding memblock [0xbffe0000 - 0xbfffffff] on node 0
  150. [ 0.000000] NUMA: Adding memblock [0x100000000 - 0x23fffffff] on node 0
  151. [ 0.000000] NUMA: Initmem setup node 0 [mem 0x00000000-0x23fffffff]
  152. [ 0.000000] NUMA: NODE_DATA [mem 0x23fffe200-0x23fffffff]
  153. [ 0.000000] Zone ranges:
  154. [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
  155. [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
  156. [ 0.000000] Movable zone start for each node
  157. [ 0.000000] Early memory node ranges
  158. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  159. [ 0.000000] node 0: [mem 0x0000000004200000-0x00000000b66fffff]
  160. [ 0.000000] node 0: [mem 0x00000000b6700000-0x00000000b676ffff]
  161. [ 0.000000] node 0: [mem 0x00000000b6770000-0x00000000bf80ffff]
  162. [ 0.000000] node 0: [mem 0x00000000bf810000-0x00000000bfbeffff]
  163. [ 0.000000] node 0: [mem 0x00000000bfbf0000-0x00000000bfd5ffff]
  164. [ 0.000000] node 0: [mem 0x00000000bfd60000-0x00000000bffdffff]
  165. [ 0.000000] node 0: [mem 0x00000000bffe0000-0x00000000bfffffff]
  166. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
  167. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000023fffffff]
  168. [ 0.000000] psci: probing for conduit method from ACPI.
  169. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  170. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  171. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  172. [ 0.000000] percpu: Embedded 3 pages/cpu @ffff80023feb0000 s124440 r8192 d63976 u196608
  173. [ 0.000000] Detected PIPT I-cache on CPU0
  174. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 130912
  175. [ 0.000000] Policy zone: Normal
  176. [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-22.el7a.aarch64 root=UUID=1fd2eed5-5136-4fbc-a76e-2937beac4eb3 ro
  177. [ 0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
  178. [ 0.000000] software IO TLB [mem 0xbb810000-0xbf810000] (64MB) mapped at [ffff8000bb810000-ffff8000bf80ffff]
  179. [ 0.000000] Memory: 7714368K/8386560K available (7548K kernel code, 1368K rwdata, 3200K rodata, 1216K init, 7593K bss, 147904K reserved, 524288K cma-reserved)
  180. [ 0.000000] Virtual kernel memory layout:
  181. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  182. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000 (126847 GB)
  183. [ 0.000000] .text : 0xffff000008080000 - 0xffff0000087e0000 ( 7552 KB)
  184. [ 0.000000] .rodata : 0xffff0000087e0000 - 0xffff000008b10000 ( 3264 KB)
  185. [ 0.000000] .init : 0xffff000008b10000 - 0xffff000008c40000 ( 1216 KB)
  186. [ 0.000000] .data : 0xffff000008c40000 - 0xffff000008d96200 ( 1369 KB)
  187. [ 0.000000] .bss : 0xffff000008d96200 - 0xffff000009500854 ( 7594 KB)
  188. [ 0.000000] fixed : 0xffff7fdffe7d0000 - 0xffff7fdffec00000 ( 4288 KB)
  189. [ 0.000000] PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000 ( 16 MB)
  190. [ 0.000000] vmemmap : 0xffff7fe000000000 - 0xffff800000000000 ( 128 GB maximum)
  191. [ 0.000000] 0xffff7fe000000000 - 0xffff7fe000900000 ( 9 MB actual)
  192. [ 0.000000] memory : 0xffff800000000000 - 0xffff800240000000 ( 9216 MB)
  193. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  194. [ 0.000000] Hierarchical RCU implementation.
  195. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  196. [ 0.000000] RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=4.
  197. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  198. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  199. [ 0.000000] GIC: Using split EOI/Deactivate mode
  200. [ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
  201. [ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
  202. [ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
  203. [ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
  204. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
  205. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
  206. [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
  207. [ 0.000059] Console: colour dummy device 80x25
  208. [ 0.000105] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
  209. [ 0.000114] pid_max: default: 32768 minimum: 301
  210. [ 0.000139] ACPI: Core revision 20170119
  211. [ 0.000531] ACPI: 1 ACPI AML tables successfully acquired and loaded
  212. [ 0.000574] Security Framework initialized
  213. [ 0.000581] SELinux: Initializing.
  214. [ 0.000773] Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes)
  215. [ 0.002720] Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes)
  216. [ 0.003942] Mount-cache hash table entries: 16384 (order: 1, 131072 bytes)
  217. [ 0.003949] Mountpoint-cache hash table entries: 16384 (order: 1, 131072 bytes)
  218. [ 0.004440] ftrace: allocating 27056 entries in 7 pages
  219. [ 0.041755] ASID allocator initialised with 65536 entries
  220. [ 0.042432] Remapping and enabling EFI services.
  221. [ 0.042468] EFI remap 0x00000000bf810000 => 0000000020000000
  222. [ 0.042476] EFI remap 0x00000000bfd60000 => 00000000203e0000
  223. [ 0.042481] EFI remap 0x00000000f4284000 => 0000000020664000
  224. [ 0.042637] smp: Bringing up secondary CPUs ...
  225. [ 0.042981] Detected PIPT I-cache on CPU1
  226. [ 0.043020] CPU1: Booted secondary processor [410fd081]
  227. [ 0.043382] Detected PIPT I-cache on CPU2
  228. [ 0.043412] CPU2: Booted secondary processor [410fd081]
  229. [ 0.043786] Detected PIPT I-cache on CPU3
  230. [ 0.043807] CPU3: Booted secondary processor [410fd081]
  231. [ 0.043860] smp: Brought up 1 node, 4 CPUs
  232. [ 0.043872] SMP: Total of 4 processors activated.
  233. [ 0.043877] CPU features: detected feature: 32-bit EL0 Support
  234. [ 0.043884] CPU: All CPU(s) started at EL2
  235. [ 0.044846] devtmpfs: initialized
  236. [ 0.045155] SMBIOS 3.0.0 present.
  237. [ 0.045167] DMI: Marvell Armada 8040 MacchiatoBin/Armada 8040 MacchiatoBin, BIOS EDK II Sep 28 2017
  238. [ 0.045256] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  239. [ 0.045270] futex hash table entries: 1024 (order: 1, 131072 bytes)
  240. [ 0.045791] pinctrl core: initialized pinctrl subsystem
  241. [ 0.046058] NET: Registered protocol family 16
  242. [ 0.046425] cpuidle: using governor menu
  243. [ 0.046433] PCCT header not found.
  244. [ 0.046457] vdso: 2 pages (1 code @ ffff000008800000, 1 data @ ffff000008c60000)
  245. [ 0.046463] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  246. [ 0.049956] DMA: preallocated 256 KiB pool for atomic allocations
  247. [ 0.049984] ACPI: bus type PCI registered
  248. [ 0.049989] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  249. [ 0.050041] Serial: AMBA PL011 UART driver
  250. [ 0.052595] HugeTLB registered 512 MB page size, pre-allocated 0 pages
  251. [ 0.053233] ACPI: Added _OSI(Module Device)
  252. [ 0.053238] ACPI: Added _OSI(Processor Device)
  253. [ 0.053242] ACPI: Added _OSI(3.0 _SCP Extensions)
  254. [ 0.053246] ACPI: Added _OSI(Processor Aggregator Device)
  255. [ 0.054032] ACPI: Interpreter enabled
  256. [ 0.054037] ACPI: Using GIC for interrupt routing
  257. [ 0.054061] ACPI: Failed to parse MCFG (-19)
  258. [ 0.055873] vgaarb: loaded
  259. [ 0.055986] SCSI subsystem initialized
  260. [ 0.056125] ACPI: bus type USB registered
  261. [ 0.056164] usbcore: registered new interface driver usbfs
  262. [ 0.056183] usbcore: registered new interface driver hub
  263. [ 0.056216] usbcore: registered new device driver usb
  264. [ 0.056336] Registered efivars operations
  265. [ 0.056673] genirq: Flags mismatch irq 11. 00010804 (arm-pmu) vs. 00010804 (arm-pmu)
  266. [ 0.056680] CPU: 1 PID: 13 Comm: cpuhp/1 Not tainted 4.11.0-22.el7a.aarch64 #1
  267. [ 0.056684] Hardware name: Marvell Armada 8040 MacchiatoBin/Armada 8040 MacchiatoBin, BIOS EDK II Sep 28 2017
  268. [ 0.056688] Call trace:
  269. [ 0.056703] [<ffff000008088770>] dump_backtrace+0x0/0x270
  270. [ 0.056709] [<ffff000008088a04>] show_stack+0x24/0x2c
  271. [ 0.056715] [<ffff0000083cbdc8>] dump_stack+0x84/0xa8
  272. [ 0.056722] [<ffff00000813586c>] __setup_irq+0x564/0x5a8
  273. [ 0.056726] [<ffff000008135a7c>] request_threaded_irq+0xf8/0x1cc
  274. [ 0.056733] [<ffff000008675a6c>] armpmu_request_irq+0x118/0x16c
  275. [ 0.056738] [<ffff000008676420>] arm_pmu_acpi_cpu_starting+0x104/0x158
  276. [ 0.056744] [<ffff0000080cc8a0>] cpuhp_invoke_callback+0xb4/0x4ac
  277. [ 0.056748] [<ffff0000080cd8a0>] cpuhp_thread_fun+0xd4/0x11c
  278. [ 0.056754] [<ffff0000080f1f34>] smpboot_thread_fn+0x1b4/0x1c4
  279. [ 0.056760] [<ffff0000080ed4ac>] kthread+0x10c/0x138
  280. [ 0.056764] [<ffff0000080833c0>] ret_from_fork+0x10/0x50
  281. [ 0.056769] hw perfevents: unable to request IRQ11 for ARM PMU counters
  282. [ 0.056789] genirq: Flags mismatch irq 11. 00010804 (arm-pmu) vs. 00010804 (arm-pmu)
  283. [ 0.056797] CPU: 2 PID: 19 Comm: cpuhp/2 Not tainted 4.11.0-22.el7a.aarch64 #1
  284. [ 0.056801] Hardware name: Marvell Armada 8040 MacchiatoBin/Armada 8040 MacchiatoBin, BIOS EDK II Sep 28 2017
  285. [ 0.056805] Call trace:
  286. [ 0.056815] [<ffff000008088770>] dump_backtrace+0x0/0x270
  287. [ 0.056821] [<ffff000008088a04>] show_stack+0x24/0x2c
  288. [ 0.056826] [<ffff0000083cbdc8>] dump_stack+0x84/0xa8
  289. [ 0.056832] [<ffff00000813586c>] __setup_irq+0x564/0x5a8
  290. [ 0.056837] [<ffff000008135a7c>] request_threaded_irq+0xf8/0x1cc
  291. [ 0.056843] [<ffff000008675a6c>] armpmu_request_irq+0x118/0x16c
  292. [ 0.056848] [<ffff000008676420>] arm_pmu_acpi_cpu_starting+0x104/0x158
  293. [ 0.056853] [<ffff0000080cc8a0>] cpuhp_invoke_callback+0xb4/0x4ac
  294. [ 0.056857] [<ffff0000080cd8a0>] cpuhp_thread_fun+0xd4/0x11c
  295. [ 0.056862] [<ffff0000080f1f34>] smpboot_thread_fn+0x1b4/0x1c4
  296. [ 0.056868] [<ffff0000080ed4ac>] kthread+0x10c/0x138
  297. [ 0.056872] [<ffff0000080833c0>] ret_from_fork+0x10/0x50
  298. [ 0.056876] hw perfevents: unable to request IRQ11 for ARM PMU counters
  299. [ 0.056895] genirq: Flags mismatch irq 11. 00010804 (arm-pmu) vs. 00010804 (arm-pmu)
  300. [ 0.056901] CPU: 3 PID: 25 Comm: cpuhp/3 Not tainted 4.11.0-22.el7a.aarch64 #1
  301. [ 0.056906] Hardware name: Marvell Armada 8040 MacchiatoBin/Armada 8040 MacchiatoBin, BIOS EDK II Sep 28 2017
  302. [ 0.056909] Call trace:
  303. [ 0.056916] [<ffff000008088770>] dump_backtrace+0x0/0x270
  304. [ 0.056921] [<ffff000008088a04>] show_stack+0x24/0x2c
  305. [ 0.056926] [<ffff0000083cbdc8>] dump_stack+0x84/0xa8
  306. [ 0.056931] [<ffff00000813586c>] __setup_irq+0x564/0x5a8
  307. [ 0.056935] [<ffff000008135a7c>] request_threaded_irq+0xf8/0x1cc
  308. [ 0.056940] [<ffff000008675a6c>] armpmu_request_irq+0x118/0x16c
  309. [ 0.056945] [<ffff000008676420>] arm_pmu_acpi_cpu_starting+0x104/0x158
  310. [ 0.056950] [<ffff0000080cc8a0>] cpuhp_invoke_callback+0xb4/0x4ac
  311. [ 0.056954] [<ffff0000080cd8a0>] cpuhp_thread_fun+0xd4/0x11c
  312. [ 0.056959] [<ffff0000080f1f34>] smpboot_thread_fn+0x1b4/0x1c4
  313. [ 0.056964] [<ffff0000080ed4ac>] kthread+0x10c/0x138
  314. [ 0.056968] [<ffff0000080833c0>] ret_from_fork+0x10/0x50
  315. [ 0.056972] hw perfevents: unable to request IRQ11 for ARM PMU counters
  316. [ 0.057162] NetLabel: Initializing
  317. [ 0.057166] NetLabel: domain hash size = 128
  318. [ 0.057169] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  319. [ 0.057199] NetLabel: unlabeled traffic allowed by default
  320. [ 0.057335] clocksource: Switched to clocksource arch_sys_counter
  321. [ 0.081191] VFS: Disk quotas dquot_6.6.0
  322. [ 0.081246] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
  323. [ 0.081461] pnp: PnP ACPI init
  324. [ 0.081530] pnp: PnP ACPI: found 0 devices
  325. [ 0.084836] NET: Registered protocol family 2
  326. [ 0.085103] TCP established hash table entries: 65536 (order: 3, 524288 bytes)
  327. [ 0.085306] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
  328. [ 0.085645] TCP: Hash tables configured (established 65536 bind 65536)
  329. [ 0.085705] UDP hash table entries: 4096 (order: 1, 131072 bytes)
  330. [ 0.085750] UDP-Lite hash table entries: 4096 (order: 1, 131072 bytes)
  331. [ 0.085889] NET: Registered protocol family 1
  332. [ 0.086009] Unpacking initramfs...
  333. [ 1.428176] Freeing initrd memory: 43776K
  334. [ 1.428480] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
  335. [ 1.428503] kvm [1]: 8-bit VMID
  336. [ 1.428507] kvm [1]: IDMAP page: 7c7000
  337. [ 1.428510] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  338. [ 1.428663] kvm [1]: Hyp mode initialized successfully
  339. [ 1.428684] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
  340. [ 1.428696] kvm [1]: vgic-v2@f0240000
  341. [ 1.428769] kvm [1]: vgic interrupt IRQ1
  342. [ 1.428778] kvm [1]: virtual timer IRQ3
  343. [ 1.468231] audit: initializing netlink subsys (disabled)
  344. [ 1.468335] audit: type=2000 audit(1.440:1): state=initialized audit_enabled=0 res=1
  345. [ 1.468560] Initialise system trusted keyrings
  346. [ 1.468633] workingset: timestamp_bits=44 max_order=17 bucket_order=0
  347. [ 1.471152] zbud: loaded
  348. [ 1.554686] NET: Registered protocol family 38
  349. [ 1.554697] Key type asymmetric registered
  350. [ 1.554702] Asymmetric key parser 'x509' registered
  351. [ 1.554749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  352. [ 1.554812] io scheduler noop registered
  353. [ 1.554816] io scheduler deadline registered (default)
  354. [ 1.554884] io scheduler cfq registered
  355. [ 1.554888] io scheduler mq-deadline registered
  356. [ 1.555029] atomic64_test: passed
  357. [ 1.555372] acpi ACPI0007:00: CPPC data invalid or not present
  358. [ 1.555396] acpi ACPI0007:01: CPPC data invalid or not present
  359. [ 1.555414] acpi ACPI0007:02: CPPC data invalid or not present
  360. [ 1.555431] acpi ACPI0007:03: CPPC data invalid or not present
  361. [ 1.555547] GHES: HEST is not enabled!
  362. [ 1.555631] ACPI GTDT: found 1 SBSA generic Watchdog(s).
  363. [ 1.555797] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  364. [ 1.576451] HISI0031:00: ttyS0 at MMIO 0xf0512000 (irq = 10, base_baud = 12500000) is a 16550A
  365. [ 2.987278] console [ttyS0] enabled
  366. [ 2.991421] rdac: device handler registered
  367. [ 2.995692] hp_sw: device handler registered
  368. [ 2.999991] emc: device handler registered
  369. [ 3.004202] alua: device handler registered
  370. [ 3.008604] libphy: Fixed MDIO Bus: probed
  371. [ 3.012806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  372. [ 3.019383] ehci-pci: EHCI PCI platform driver
  373. [ 3.023867] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  374. [ 3.030088] ohci-pci: OHCI PCI platform driver
  375. [ 3.034564] uhci_hcd: USB Universal Host Controller Interface driver
  376. [ 3.041063] xhci-hcd PNP0D10:00: xHCI Host Controller
  377. [ 3.046221] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 1
  378. [ 3.053694] xhci-hcd PNP0D10:00: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  379. [ 3.062024] xhci-hcd PNP0D10:00: irq 7, io mem 0xf2500000
  380. [ 3.067533] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  381. [ 3.074351] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  382. [ 3.081614] usb usb1: Product: xHCI Host Controller
  383. [ 3.086513] usb usb1: Manufacturer: Linux 4.11.0-22.el7a.aarch64 xhci-hcd
  384. [ 3.093335] usb usb1: SerialNumber: PNP0D10:00
  385. [ 3.098017] hub 1-0:1.0: USB hub found
  386. [ 3.101795] hub 1-0:1.0: 1 port detected
  387. [ 3.105845] xhci-hcd PNP0D10:00: xHCI Host Controller
  388. [ 3.110994] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2
  389. [ 3.118304] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  390. [ 3.126474] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  391. [ 3.133298] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  392. [ 3.140558] usb usb2: Product: xHCI Host Controller
  393. [ 3.145457] usb usb2: Manufacturer: Linux 4.11.0-22.el7a.aarch64 xhci-hcd
  394. [ 3.152281] usb usb2: SerialNumber: PNP0D10:00
  395. [ 3.156937] hub 2-0:1.0: USB hub found
  396. [ 3.160725] hub 2-0:1.0: 1 port detected
  397. [ 3.164803] xhci-hcd PNP0D10:01: xHCI Host Controller
  398. [ 3.169957] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 3
  399. [ 3.177381] xhci-hcd PNP0D10:01: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  400. [ 3.185697] xhci-hcd PNP0D10:01: irq 8, io mem 0xf2510000
  401. [ 3.191191] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  402. [ 3.198018] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  403. [ 3.205271] usb usb3: Product: xHCI Host Controller
  404. [ 3.210178] usb usb3: Manufacturer: Linux 4.11.0-22.el7a.aarch64 xhci-hcd
  405. [ 3.216995] usb usb3: SerialNumber: PNP0D10:01
  406. [ 3.221679] hub 3-0:1.0: USB hub found
  407. [ 3.225456] hub 3-0:1.0: 1 port detected
  408. [ 3.229503] xhci-hcd PNP0D10:01: xHCI Host Controller
  409. [ 3.234672] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 4
  410. [ 3.241964] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  411. [ 3.250140] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  412. [ 3.256958] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  413. [ 3.264215] usb usb4: Product: xHCI Host Controller
  414. [ 3.269125] usb usb4: Manufacturer: Linux 4.11.0-22.el7a.aarch64 xhci-hcd
  415. [ 3.275941] usb usb4: SerialNumber: PNP0D10:01
  416. [ 3.280637] hub 4-0:1.0: USB hub found
  417. [ 3.284413] hub 4-0:1.0: 1 port detected
  418. [ 3.288515] xhci-hcd PNP0D10:02: xHCI Host Controller
  419. [ 3.293663] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 5
  420. [ 3.301089] xhci-hcd PNP0D10:02: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  421. [ 3.309413] xhci-hcd PNP0D10:02: irq 9, io mem 0xf4500000
  422. [ 3.314903] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  423. [ 3.321726] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  424. [ 3.328988] usb usb5: Product: xHCI Host Controller
  425. [ 3.333885] usb usb5: Manufacturer: Linux 4.11.0-22.el7a.aarch64 xhci-hcd
  426. [ 3.340709] usb usb5: SerialNumber: PNP0D10:02
  427. [ 3.345498] hub 5-0:1.0: USB hub found
  428. [ 3.349289] hub 5-0:1.0: 1 port detected
  429. [ 3.353330] xhci-hcd PNP0D10:02: xHCI Host Controller
  430. [ 3.358478] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 6
  431. [ 3.365760] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  432. [ 3.373937] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
  433. [ 3.380761] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  434. [ 3.388018] usb usb6: Product: xHCI Host Controller
  435. [ 3.392917] usb usb6: Manufacturer: Linux 4.11.0-22.el7a.aarch64 xhci-hcd
  436. [ 3.399744] usb usb6: SerialNumber: PNP0D10:02
  437. [ 3.404429] hub 6-0:1.0: USB hub found
  438. [ 3.408240] hub 6-0:1.0: 1 port detected
  439. [ 3.412341] usbcore: registered new interface driver usbserial
  440. [ 3.418221] usbcore: registered new interface driver usbserial_generic
  441. [ 3.424788] usbserial: USB Serial support registered for generic
  442. [ 3.430913] mousedev: PS/2 mouse device common for all mice
  443. [ 3.436670] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
  444. [ 3.443046] EFI Variables Facility v0.08 2004-May-17
  445. [ 3.448666] hidraw: raw HID events driver (C) Jiri Kosina
  446. [ 3.454165] usbcore: registered new interface driver usbhid
  447. [ 3.459771] usbhid: USB HID core driver
  448. [ 3.463711] drop_monitor: Initializing network drop monitor service
  449. [ 3.470116] Initializing XFRM netlink socket
  450. [ 3.474596] NET: Registered protocol family 10
  451. [ 3.479078] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  452. [ 3.486119] Segment Routing with IPv6
  453. [ 3.489838] NET: Registered protocol family 17
  454. [ 3.494590] registered taskstats version 1
  455. [ 3.498724] Loading compiled-in X.509 certificates
  456. [ 3.507830] alg: No test for pkcs1pad(rsa,sha1) (pkcs1pad(rsa-generic,sha1))
  457. [ 3.515849] Loaded X.509 cert 'CentOS Linux kernel signing key: fc0154f343e279c9ce4ead5ca3a6cef4318d2733'
  458. [ 3.525548] zswap: loaded using pool lzo/zbud
  459. [ 3.554464] Key type big_key registered
  460. [ 3.558492] rtc-efi rtc-efi: setting system clock to 2017-09-29 11:28:54 UTC (1506684534)
  461. [ 3.567049] Freeing unused kernel memory: 1216K
  462. [ 3.579577] random: systemd: uninitialized urandom read (16 bytes read)
  463. [ 3.586877] random: systemd: uninitialized urandom read (16 bytes read)
  464. [ 3.593571] random: systemd: uninitialized urandom read (16 bytes read)
  465. [ 3.603570] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  466. [ 3.622062] systemd[1]: Detected architecture arm64.
  467. [ 3.627052] systemd[1]: Running in initial RAM disk.
  468.  
  469. Welcome to CentOS Linux 7 (AltArch) dracut-033-502.el7 (Initramfs)!
  470.  
  471. [ 3.657986] usb 1-1: New USB device found, idVendor=0781, idProduct=5571
  472. [ 3.664718] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  473. [ 3.671938] usb 1-1: Product: Cruzer Fit
  474. [ 3.671956] systemd[1]: No hostname configured.
  475. [ 3.671967] systemd[1]: Set hostname to <localhost>.
  476. [ 3.672061] random: systemd: uninitialized urandom read (16 bytes read)
  477. [ 3.672074] systemd[1]: Initializing machine ID from random generator.
  478. [ 3.698620] usb 1-1: Manufacturer: SanDisk
  479. [ 3.698624] usb 1-1: SerialNumber: 4C531146431108105292
  480. [ 3.713608] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
  481. [ 3.767432] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
  482. [ 3.769511] random: systemd: uninitialized urandom read (16 bytes read)
  483. [ 3.769567] random: systemd: uninitialized urandom read (16 bytes read)
  484. [ 3.769647] random: systemd: uninitialized urandom read (16 bytes read)
  485. [ 3.769801] random: systemd: uninitialized urandom read (16 bytes read)
  486. [ 3.771379] random: systemd: uninitialized urandom read (16 bytes read)
  487. [ 3.781839] systemd[1]: Cannot add dependency job for unit blk-availability.service, ignoring: Unit not found.
  488. [ OK ] Reached target Local File Systems.
  489. [ 3.847717] usb 6-1: New USB device found, idVendor=125f, idProduct=db8a
  490. [ 3.854449] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  491. [ 3.861627] usb 6-1: Product: ADATA USB Flash Drive
  492. [ 3.861665] systemd[1]: Reached target Local File Systems.
  493. [ 3.861688] systemd[1]: Starting Local File Systems.
  494. [ 3.877020] usb 6-1: Manufacturer: ADATA
  495. [ 3.877025] usb 6-1: SerialNumber: 2661510440170255
  496. [ OK ] Reached target Timers.
  497. [ 3.917370] systemd[1]: Reached target Timers.
  498. [ OK ] Reached target Encrypted Volumes.
  499. [ OK ] Reached target Swap.
  500. [ OK ] Created slice Root Slice.
  501. [ OK ] Listening on Journal Socket.
  502. [ OK ] Created slice System Slice.
  503. Starting dracut cmdline hook...
  504. Starting Setup Virtual Console...
  505. Starting Journal Service...
  506. [ OK ] Listening on udev Kernel Socket.
  507. [ OK ] Reached target Slices.
  508. Starting Create list of required st... nodes for the current kernel...
  509. [ OK ] Listening on udev Control Socket.
  510. Starting Apply Kernel Variables...
  511. [ OK ] Started Journal Service.
  512. [ OK ] Started Setup Virtual Console.
  513. [ OK ] Started dracut cmdline hook.
  514. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  515. [ OK ] Started Apply Kernel Variables.
  516. Starting Create Static Device Nodes in /dev...
  517. Starting dracut pre-udev hook...
  518. [ 4.553859] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
  519. [ OK [ 4.564676] device-mapper: uevent: version 1.0.3
  520. ] Started Create[ 4.570338] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  521. Static Device Nodes in /dev.
  522. [ OK ] Started dracut pre-udev hook.
  523. Starting udev Kernel Device Manager...
  524. [ OK ] Started udev Kernel Device Manager.
  525. Starting dracut pre-trigger hook...
  526. [ OK ] Started dracut pre-trigger hook.
  527. Starting udev Coldplug all Devices...
  528. Mounting Configuration File System...
  529. [ 4.980988] ahci LNRO001E:00: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  530. [ 4.989425] ahci LNRO001E:00: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  531. [ 4.994303] usb-storage 1-1:1.0: USB Mass Storage device detected
  532. [ OK [ 5.005736] scsi host0: usb-storage 1-1:1.0
  533. ] Mounted Config[ 5.006279] scsi host1: ahci
  534. [ 5.006463] scsi host2: ahci
  535. uration File Sys[ 5.006545] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf2541fff] port 0x100 irq 5
  536. [ 5.006549] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf2541fff] port 0x180 irq 5
  537. tem.
  538. [ 5.006673] ahci LNRO001E:01: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  539. [ 5.006679] ahci LNRO001E:01: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  540. [ 5.007175] scsi host3: ahci
  541. [ 5.007397] scsi host4: ahci
  542. [ 5.007476] ata3: SATA max UDMA/133 mmio [mem 0xf4540000-0xf4541fff] port 0x100 irq 6
  543. [ 5.007479] ata4: SATA max UDMA/133 mmio [mem 0xf4540000-0xf4541fff] port 0x180 irq 6
  544. [ 5.073396] usb-storage 6-1:1.0: USB Mass Storage device detected
  545. [ OK ][ 5.079969] scsi host5: usb-storage 6-1:1.0
  546. Started udev Co[ 5.085456] usbcore: registered new interface driver usb-storage
  547. ldplug all Devices.
  548. [ 5.094893] usbcore: registered new interface driver uas
  549. Starting Show Plymouth Boot Screen...
  550. [ 5.162007] Loading iSCSI transport class v2.0-870.
  551. Starting Open-iSCSI...
  552. [ OK ] Reached target System Initialization.
  553. [ OK ] Listening on Open-iSCSI iscsiuio Socket.
  554. [ OK ] Reached target Sockets.
  555. [ OK ] Started Show Plymouth Boot Screen.
  556. [ OK ] Started Open-iSCSI.
  557. Starting dracut initqueue hook...
  558. [ OK ] Reached target Paths.
  559. [ OK ] Reached target Basic System.
  560. [ 5.338607] ata1: SATA link down (SStatus 0 SControl 300)
  561. [ 5.358651] ata4: SATA link down (SStatus 0 SControl 300)
  562. [ 5.527352] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  563. [ 5.527355] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  564. [ 5.539800] ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
  565. [ 5.541226] ata2.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
  566. [ 5.541230] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  567. [ 5.543046] ata2.00: configured for UDMA/133
  568. [ 5.543320] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
  569. [ 5.572847] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  570. [ 5.581176] ata3.00: configured for UDMA/133
  571. [ 5.657779] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  572. [ 5.657930] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
  573. [ 5.673491] sd 2:0:0:0: [sda] Write Protect is off
  574. [ 5.678359] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  575. [ 5.720621] GPT:Primary header thinks Alt. header is not at the end of the disk.
  576. [ 5.728061] GPT:25165823 != 976773167
  577. [ 5.731737] GPT:Alternate GPT header not at the end of the disk.
  578. [ 5.737777] GPT:25165823 != 976773167
  579. [ 5.741452] GPT: Use GNU Parted to correct GPT errors.
  580. [ 5.746626] sda: sda1 sda2 sda3 sda4
  581. [ 5.750948] sd 2:0:0:0: [sda] Attached SCSI removable disk
  582. [ 5.797733] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  583. [ 5.805297] sd 3:0:0:0: [sdb] Write Protect is off
  584. [ 5.810180] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  585. [ 5.841106] random: fast init done
  586. [ 5.871624] sdb: sdb1 sdb2
  587. [ 5.875031] sd 3:0:0:0: [sdb] Attached SCSI removable disk
  588. [ OK ] Found device WDC_WD5000AAKX-00ERMA0 rootfs.
  589. Starting File System Check on /dev/...5-5136-4fbc-a76e-2937beac4eb3...
  590. [ OK ] Started File System Check on /dev/d...ed5-5136-4fbc-a76e-2937beac4eb3.
  591. [ 6.107706] scsi 5:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
  592. [ 6.107807] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Fit 1.00 PQ: 0 ANSI: 6
  593. [ OK ] Started dracut[ 6.126520] sd 5:0:0:0: [sdc] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
  594. initqueue hook.[ 6.128741] sd 0:0:0:0: [sdd] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
  595.  
  596. [ OK [ 6.129047] sd 0:0:0:0: [sdd] Write Protect is off
  597. [0m] Reached tar[ 6.129346] sd 0:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  598. get Remote File [ 6.142934] sdd: sdd1 sdd2
  599. [ 6.142934] sdd2: <bsd: sdd5 >
  600. [ 6.156367] sd 0:0:0:0: [sdd] Attached SCSI removable disk
  601.  
  602. [ OK [ 6.174714] sd 5:0:0:0: [sdc] Write Protect is off
  603. ] Reached target[ 6.181112] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
  604. Remote File Systems.
  605. Starting dracut[ 6.194675] sdc: sdc1 sdc2
  606. pre-mount hook.[ 6.199789] sd 5:0:0:0: [sdc] Attached SCSI removable disk
  607. ..
  608. [ OK ] Started dracut pre-mount hook.
  609. Mounting /sysroot...
  610. [ 6.244511] SGI XFS with ACLs, security attributes, no debug enabled
  611. [ 6.253803] XFS (sda4): Mounting V5 Filesystem
  612. [ 6.339273] XFS (sda4): Ending clean mount
  613. [ OK ] Mounted /sysroot.
  614. [ OK ] Reached target Initrd Root File System.
  615. Starting Reload Configuration from the Real Root...
  616. [ OK ] Started Reload Configuration from the Real Root.
  617. [ OK ] Reached target Initrd File Systems.
  618. [ OK ] Reached target Initrd Default Target.
  619. Starting dracut pre-pivot and cleanup hook...
  620. [ OK ] Started dracut pre-pivot and cleanup hook.
  621. Starting Cleaning Up and Shutting Down Daemons...
  622. [ OK ] Stopped target Timers.
  623. Starting Plymouth switch root service...
  624. [ OK ] Stopped Cleaning Up and Shutting Down Daemons.
  625. [ OK ] Stopped dracut pre-pivot and cleanup hook.
  626. Stopping dracut pre-pivot and cleanup hook...
  627. [ OK ] Stopped dracut pre-mount hook.
  628. Stopping dracut pre-mount hook...
  629. [ OK ] Stopped target Remote File Systems.
  630. [ OK ] Stopped target Remote File Systems (Pre).
  631. [ OK ] Stopped dracut initqueue hook.
  632. Stopping dracut initqueue hook...
  633. Stopping Open-iSCSI...
  634. [ OK ] Stopped target Initrd Default Target.
  635. [ OK ] Stopped target Basic System.
  636. [ OK ] Stopped target Slices.
  637. [ OK ] Stopped target Paths.
  638. [ OK ] Stopped target Sockets.
  639. [ OK ] Closed Open-iSCSI iscsiuio Socket.
  640. [ OK ] Stopped target System Initialization.
  641. [ OK ] Stopped Apply Kernel Variables.
  642. Stopping Apply Kernel Variables...
  643. [ OK ] Stopped target Encrypted Volumes.
  644. [ OK ] Stopped target Local File Systems.
  645. [ OK ] Stopped udev Coldplug all Devices.
  646. Stopping udev Coldplug all Devices...
  647. [ OK ] Stopped dracut pre-trigger hook.
  648. Stopping dracut pre-trigger hook...
  649. Stopping udev Kernel Device Manager...
  650. [ OK ] Stopped target Swa[ 6.796508] systemd-journald[221]: Received SIGTERM from PID 1 (systemd).
  651. p.
  652. [ OK ] Stopped Open-iSCSI.
  653. [ OK ] Started Plymouth switch root service.
  654. [ OK ] Stopped udev Kernel Device Manager.
  655. [ OK ] Stopped Create Static Device Nodes in /dev.
  656. Stopping Create Static Device Nodes in /dev...
  657. [ OK ] Stopped Create list of required sta...ce nodes for the current kernel.
  658. Stopping Create list of required st... nodes for the current kernel...
  659. [ OK ] Stopped dracut pre-udev hook.
  660. Stopping dracut pre-udev hook...
  661. [ OK ] Stopped dracut cmdline hook.
  662. Stopping dracut cmdline hook...
  663. [ OK ] Closed udev Kernel Socket.
  664. [ OK ] Closed udev Control Socket.
  665. Starting Cleanup udevd DB...
  666. [ OK ] Started Cleanup udevd DB.
  667. [ OK ] Reached target Switch Root.
  668. Starting Switch Root...
  669. [ 6.905899] systemd: 23 output lines suppressed due to ratelimiting
  670. [ 7.162466] audit: type=1404 audit(1506684538.090:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  671. [ 7.503918] SELinux: Class sctp_socket not defined in policy.
  672. [ 7.509796] SELinux: Class icmp_socket not defined in policy.
  673. [ 7.515652] SELinux: Class ax25_socket not defined in policy.
  674. [ 7.521513] SELinux: Class ipx_socket not defined in policy.
  675. [ 7.527282] SELinux: Class netrom_socket not defined in policy.
  676. [ 7.533317] SELinux: Class atmpvc_socket not defined in policy.
  677. [ 7.539352] SELinux: Class x25_socket not defined in policy.
  678. [ 7.545121] SELinux: Class rose_socket not defined in policy.
  679. [ 7.550981] SELinux: Class decnet_socket not defined in policy.
  680. [ 7.557012] SELinux: Class atmsvc_socket not defined in policy.
  681. [ 7.563053] SELinux: Class rds_socket not defined in policy.
  682. [ 7.568828] SELinux: Class irda_socket not defined in policy.
  683. [ 7.574684] SELinux: Class pppox_socket not defined in policy.
  684. [ 7.580631] SELinux: Class llc_socket not defined in policy.
  685. [ 7.586401] SELinux: Class can_socket not defined in policy.
  686. [ 7.592174] SELinux: Class tipc_socket not defined in policy.
  687. [ 7.598033] SELinux: Class bluetooth_socket not defined in policy.
  688. [ 7.604325] SELinux: Class iucv_socket not defined in policy.
  689. [ 7.610186] SELinux: Class rxrpc_socket not defined in policy.
  690. [ 7.616129] SELinux: Class isdn_socket not defined in policy.
  691. [ 7.621990] SELinux: Class phonet_socket not defined in policy.
  692. [ 7.628025] SELinux: Class ieee802154_socket not defined in policy.
  693. [ 7.634405] SELinux: Class caif_socket not defined in policy.
  694. [ 7.640266] SELinux: Class alg_socket not defined in policy.
  695. [ 7.646035] SELinux: Class nfc_socket not defined in policy.
  696. [ 7.651808] SELinux: Class vsock_socket not defined in policy.
  697. [ 7.657756] SELinux: Class kcm_socket not defined in policy.
  698. [ 7.663526] SELinux: Class qipcrtr_socket not defined in policy.
  699. [ 7.669649] SELinux: Class smc_socket not defined in policy.
  700. [ 7.675418] SELinux: the above unknown classes and permissions will be allowed
  701. [ 7.731463] audit: type=1403 audit(1506684538.660:3): policy loaded auid=4294967295 ses=4294967295
  702. [ 7.737217] systemd[1]: Successfully loaded SELinux policy in 584.656ms.
  703. [ 7.959624] ip_tables: (C) 2000-2006 Netfilter Core Team
  704. [ 7.965000] systemd[1]: Inserted module 'ip_tables'
  705. [ 8.035972] systemd[1]: Relabelled /dev and /run in 62.963ms.
  706.  
  707. Welcome to CentOS Linux 7 (AltArch)!
  708.  
  709. [ OK ] Stopped Switch Root.
  710. [ OK ] Stopped Journal Service.
  711. Starting Journal Service...
  712. [ OK ] Listening on Delayed Shutdown Socket.
  713. Mounting POSIX Message Queue File System...
  714. [ OK ] Stopped File System Check on Root Device.
  715. Stopping File System Check on Root Device...
  716. Starting Collect Read-Ahead Data...
  717. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  718. Mounting Debug File System...
  719. [ OK ] Listening on LVM2 metadata daemon socket.
  720. [ OK ] Created slice system-serial\x2dgetty.slice.
  721. Starting Replay Read-Ahead Data...
  722. [ OK ] Stopped target Switch Root.
  723. [ OK ] Stopped target Initrd Root File System.
  724. [ OK ] Listening on Device-mapper event daemon FIFOs.
  725. Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...
  726. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  727. [ OK ] Listening on LVM2 poll daemon socket.
  728. Starting Create list of required st... nodes for the current kernel...
  729. [ OK ] Listening on udev Kernel Socket.
  730. [ OK ] Stopped target Initrd File Systems.
  731. [ OK ] Created slice system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice.
  732. Mounting Huge Pages File System...
  733. [ OK ] Created slice system-getty.slice.
  734. [ OK ] Created slice User and Session Slice.
  735. [ OK ] Reached target Slices.
  736. [ OK ] Listening on udev Control Socket.
  737. [ OK ] Started Collect Read-Ahead Data.
  738. [ OK ] Started Replay Read-Ahead Data.
  739. Starting Remount Root and Kernel File Systems...
  740. Starting Apply Kernel Variables...
  741. [ OK ] Started Journal Service.
  742. [ OK ] Started Apply Kernel Variables.
  743. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  744. Starting Create Static Device Nodes in /dev...
  745. [ OK ] Mounted Debug File System.
  746. [ OK ] Mounted POSIX Message Queue File System.
  747. [ OK ] Mounted Huge Pages File System.
  748. [ OK ] Started Remount Root and Kernel File Systems.
  749. Starting Configure read-only root support...
  750. Starting Load/Save Random Seed...
  751. Starting udev Coldplug all Devices...
  752. Starting Flush Journal to Persistent Storage...
  753. [ OK ] Started Load/Save Random Seed.
  754. [ 9.577530] systemd-journald[622]: Received request to flush runtime journal from PID 1
  755. [ OK ] Started Flush Journal to Persistent Storage.
  756. [ OK ] Started udev Coldplug all Devices.
  757. Starting udev Wait for Complete Device Initialization...
  758. [ OK ] Started LVM2 metadata daemon.
  759. Starting LVM2 metadata daemon...
  760. [ OK ] Started Configure read-only root support.
  761. [ OK ] Started Create Static Device Nodes in /dev.
  762. Starting udev Kernel Device Manager...
  763. [ OK ] Started udev Kernel Device Manager.
  764. [ 10.908615] sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 25000000 Hz, action=0.
  765. [ OK ] Found device /dev/ttyS0.
  766. [ 11.114896] sd 2:0:0:0: Attached scsi generic sg0 type 0
  767. [ 11.120458] sd 3:0:0:0: Attached scsi generic sg1 type 0
  768. [ 11.125927] sd 5:0:0:0: Attached scsi generic sg2 type 0
  769. [ 11.131482] sd 0:0:0:0: Attached scsi generic sg3 type 0
  770. [ OK ] Found device WDC_WD5000AAKX-00ERMA0 boot.
  771. [ OK ] Found device WDC_WD5000AAKX-00ERMA0 EFI\x20System\x20Partition.
  772. [ OK ] Found device WDC_WD5000AAKX-00ERMA0 swap.
  773. Activating swap /dev/disk/by-uuid/6...3-42f9-4fdf-a93d-41d125c6f27c...
  774. [ 12.738489] Adding 2047936k swap on /dev/sda3. Priority:-1 extents:1 across:2047936k FS
  775. [ OK ] Activated swap /dev/disk/by-uuid/62450d33-42f9-4fdf-a93d-41d125c6f27c.
  776. [ OK ] Reached target Swap.
  777. [ OK ] Started udev Wait for Complete Device Initialization.
  778. Starting Activation of DM RAID sets...
  779. [ 12.853748] random: crng init done
  780. [ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling.
  781. [ OK ] Reached target Local File Systems (Pre).
  782. Mounting /boot...
  783. [ OK ] Started Activation of DM RAID sets.
  784. [ OK ] Reached target Encrypted Volumes.
  785. [ 12.930823] XFS (sda2): Mounting V5 Filesystem
  786. [ 13.462078] XFS (sda2): Ending clean mount
  787. [ OK ] Mounted /boot.
  788. Mounting /boot/efi...
  789. [ 13.594272] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  790. [ OK ] Mounted /boot/efi.
  791. [ OK ] Reached target Local File Systems.
  792. Starting Tell Plymouth To Write Out Runtime Data...
  793. Starting Import network configuration from initramfs...
  794. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  795. [ OK ] Started Import network configuration from initramfs.
  796. Starting Create Volatile Files and Directories...
  797. [ OK ] Started Create Volatile Files and Directories.
  798. Starting Security Auditing Service...
  799. [ OK ] Started Security Auditing Service.
  800. Starting Update UTMP about System Boot/Shutdown...
  801. [ OK ] Started Update UTMP about System Boot/Shutdown.
  802. [ OK ] Reached target System Initialization.
  803. [ OK ] Reached target Timers.
  804. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket.
  805. [ OK ] Listening on Open-iSCSI iscsiuio Socket.
  806. [ OK ] Listening on D-Bus System Message Bus Socket.
  807. [ OK ] Listening on Open-iSCSI iscsid Socket.
  808. [ OK ] Reached target Sockets.
  809. [ OK ] Reached target Paths.
  810. [ OK ] Reached target Basic System.
  811. [ OK ] Started D-Bus System Message Bus.
  812. Starting D-Bus System Message Bus...
  813. Starting Dump dmesg to /var/log/dmesg...
  814. Starting Authorization Manager...
  815. Starting NTP client/server...
  816. Starting System Logging Service...
  817. [ OK ] Started irqbalance daemon.
  818. Starting irqbalance daemon...
  819. Starting Login Service...
  820. [ OK ] Started Dump dmesg to /var/log/dmesg.
  821. [ OK ] Started Login Service.
  822. [ OK ] Started System Logging Service.
  823. [ OK ] Started Authorization Manager.
  824. Starting firewalld - dynamic firewall daemon...
  825. [ OK ] Started NTP client/server.
  826. [ OK ] Started firewalld - dynamic firewall daemon.
  827. [ OK ] Reached target Network (Pre).
  828. Starting Network Manager...
  829. [ 15.020254] ip6_tables: (C) 2000-2006 Netfilter Core Team
  830. [ 15.083689] Ebtables v2.0 registered
  831. [ 15.164523] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
  832. [ OK ] Started Network Manager.
  833. Starting Network Manager Wait Online...
  834. Starting Network Manager Script Dispatcher Service...
  835. [ OK ] Started Network Manager Script Dispatcher Service.
  836. [ 15.301005] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  837. Starting Hostname Service...
  838. [ 15.362897] Netfilter messages via NETLINK v0.30.
  839. [ 15.377377] ip_set: protocol 6
  840. [ OK ] Started Hostname Service.
  841. [ OK ] Started Network Manager Wait Online.
  842. Starting LSB: Bring up/down networking...
  843. [FAILED] Failed to start LSB: Bring up/down networking.
  844. See 'systemctl status network.service' for details.
  845. [ OK ] Reached target Network.
  846. Starting Postfix Mail Transport Agent...
  847. Starting Logout off all iSCSI sessions on shutdown...
  848. Starting Dynamic System Tuning Daemon...
  849. Starting OpenSSH server daemon...
  850. [ OK ] Reached target Network is Online.
  851. [ OK ] Started Logout off all iSCSI sessions on shutdown.
  852. [ OK ] Reached target Remote File Systems (Pre).
  853. [ OK ] Reached target Remote File Systems.
  854. Starting Crash recovery kernel arming...
  855. Starting Permit User Sessions...
  856. Starting Availability of block devices...
  857. [ OK ] Started Availability of block devices.
  858. [ OK ] Started Permit User Sessions.
  859. Starting Wait for Plymouth Boot Screen to Quit...
  860. [ OK ] Started Command Scheduler.
  861. Starting Command Scheduler...
  862. Starting Terminate Plymouth Boot Screen...
  863. [ OK ] Started OpenSSH server daemon.
  864. [FAILED] Failed to start Crash recovery kernel arming.
  865. See 'systemctl status kdump.service' for details.
  866.  
  867. CentOS Linux 7 (AltArch)
  868. Kernel 4.11.0-22.el7a.aarch64 on an aarch64
  869.  
  870. localhost login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement