SPI stage 1 bootloader (Build time: Mar  3 2018 - 20:32:11)


U-Boot 2013.07-JNPR-3.6 (Build time: Mar 03 2018 - 20:32:12)

SRX_300 board revision major:1, minor:12, serial #: CV2018AF0680
OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR)
DRAM: 4 GiB
Clearing DRAM...... done
Using default environment

SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB


U-Boot 2013.07-JNPR-3.6 (Build time: Mar 03 2018 - 20:34:17)

Using DRAM size from environment: 4096 MBytes
SATA0: not available
SATA1: not available
SATA BIST STATUS = 0x0
SRX_300 board revision major:1, minor:12, serial #: CV2018AF0680
OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR)
DRAM: 4 GiB
Clearing DRAM...... done
SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB
PCIe: Port 0 link active, 1 lanes, speed gen2
PCIe: Link timeout on port 1, probably the slot is empty
PCIe: Port 2 not in PCIe mode, skipping
Net:   octeth0
Interface 0 has 1 ports (SGMII)
Type the command 'usb start' to scan for USB storage devices.

Boot Media: eUSB usb
Found TPM SLB9660 TT 1.2 by Infineon
TPM initialized
Hit any key to stop autoboot:  0
SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB
SF: 1048576 bytes Read: OK
## Starting application ...
Consoles: U-Boot console
Found compatible API, ver. 3.6
USB1:
Starting the controller
USB XHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
USB0:
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... Device NOT ready
   Request Sense returned 02 3A 00
0 Storage Device(s) found

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.10
(slt-builder@svl-junos-pool87.juniper.net, Sun Mar  4 10:30:52 PST 2018)
Memory: 4096MB
SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB
[5]Booting from eUSB slice 1

can't load '/kernel'
can't load '/kernel.old'
Press Enter to stop auto bootsequencing and to enter loader prompt.