Log from serial console

DDR version 1.13 20180428
ID:0x805 N
In
LPDDR3
333MHz
Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB
ddrconfig:7
OUT
Boot1 Release Time: Sep  7 2018 15:49:55, version: 2.49
ChipType = 0x11, 197
mmc2:cmd1,20
emmc reinit
mmc2:cmd1,20
emmc reinit
mmc2:cmd1,20
SdmmcInit=2 1
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=61056MB
FwPartOffset=2000 , 0
run on sd0
StorageInit ok = 42602
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
GPT 0x337a9e0 signature is wrong
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xc13d4
RunBL31 0x10000

NOTICE:  BL31: v1.3(debug):0eba775
NOTICE:  BL31: Built : 12:11:32, Nov 23 2018
NOTICE:  BL31:Rockchip release version: v1.3
INFO:    ARM GICv2 driver initialized
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 1
INFO:    plat_rockchip_pmu_init: pd status 0xe
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-194-g646eecc5 #61 Wed Dec  5 06:31:51 UTC 2018 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-02230-gb4ab0d6-dirty (Jun 15 2019 - 11:26:02 +0800)

Model: Rockchip RK3328 EVB
DRAM:  4 GiB
Relocation Offset is: fcc04000
Using default environment

rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
Card did not respond to voltage select!
mmc_init: -95, time 9
Card did not respond to voltage select!
mmc_init: -95, time 9
Unknown command 'rknand' - try 'help'
Unknown command 'rksfc' - try 'help'
Unknown command 'rksfc' - try 'help'
Card did not respond to voltage select!
mmc_init: -95, time 9
init_resource_list: dev_desc is NULL!
DTB: rk-kernel.dtb
Card did not respond to voltage select!
mmc_init: -95, time 9
init_resource_list: dev_desc is NULL!
Can't find file:rk-kernel.dtb
init_kernel_dtb dtb in resource read fail
In:    serial
Out:   serial
Err:   serial
Model: Rockchip RK3328 EVB
Card did not respond to voltage select!
mmc_init: -95, time 9
rockchip_get_boot_mode: dev_desc is NULL!
Card did not respond to voltage select!
mmc_init: -95, time 9
[Vendor ERROR]:Invalid boot device type(0)
rockchip_set_serialno: could not find efuse device
CLK:      apll           400000000 Hz
          dpll           664000000 Hz
          cpll          1200000000 Hz
          gpll           491009999 Hz
          npll           600000000 Hz
        armclk           600000000 Hz
      aclk_bus           150000000 Hz
      hclk_bus            75000000 Hz
      pclk_bus            75000000 Hz
     aclk_peri           150000000 Hz
     hclk_peri            75000000 Hz
     pclk_peri            75000000 Hz
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
mmc_init: -95, time 9
Could not get mmc 0
AVB boot failed and enter rockusb or fastboot!
Card did not respond to voltage select!
mmc_init: -95, time 9
** Bad device mmc 0 **