Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- wpa_supplicant v2.4
- random: Trying to read entropy from /dev/random
- Successfully initialized wpa_supplicant
- Initializing interface 'wlp3s0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
- Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
- Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
- ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
- update_config=1
- Line: 4 - start of a new network block
- BSSID - hexdump(len=6): c0 c1 c0 89 39 86
- ssid - hexdump_ascii(len=3):
- 65 64 6f edo
- PSK (ASCII passphrase) - hexdump_ascii(len=22): [REMOVED]
- proto: 0x2
- key_mgmt: 0x2
- pairwise: 0x10
- auth_alg: 0x1
- PSK (from passphrase) - hexdump(len=32): [REMOVED]
- Priority group 0
- id=0 ssid='edo'
- rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
- nl80211: Supported cipher 00-0f-ac:1
- nl80211: Supported cipher 00-0f-ac:5
- nl80211: Supported cipher 00-0f-ac:2
- nl80211: Supported cipher 00-0f-ac:4
- nl80211: Using driver-based off-channel TX
- nl80211: interface wlp3s0 in phy phy0
- nl80211: Set mode ifindex 4 iftype 2 (STATION)
- nl80211: Subscribe to mgmt frames with non-AP handle 0x98ef4c8
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=0801
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 08 01
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=06
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=1): 06
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=0a07
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 0a 07
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=0a11
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 0a 11
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=1101
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 11 01
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=1102
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 11 02
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=0505
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 05 05
- nl80211: Failed to register Action frame processing - ignore for now
- netlink: Operstate: ifindex=4 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
- nl80211: driver param='(null)'
- Add interface wlp3s0 to a new radio phy0
- nl80211: Regulatory information - country=00
- nl80211: 2402-2472 @ 40 MHz 20 mBm
- nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
- nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
- nl80211: 5170-5250 @ 160 MHz 20 mBm (no IR)
- nl80211: 5250-5330 @ 160 MHz 20 mBm (DFS) (no IR)
- nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
- nl80211: Added 802.11b mode based on 802.11g information
- wlp3s0: Own MAC address: 00:21:5c:25:aa:7f
- wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
- wlp3s0: RSN: flushing PMKID list in the driver
- nl80211: Flush PMKIDs
- wlp3s0: Setting scan request: 0.100000 sec
- ENGINE: Loading dynamic engine
- ENGINE: Loading dynamic engine
- EAPOL: SUPP_PAE entering state DISCONNECTED
- EAPOL: Supplicant port status: Unauthorized
- nl80211: Skip set_supp_port(unauthorized) while not associated
- EAPOL: KEY_RX entering state NO_KEY_RECEIVE
- EAPOL: SUPP_BE entering state INITIALIZE
- EAP: EAP entering state DISABLED
- ctrl_interface_group=10 (from group name 'wheel')
- wlp3s0: Added interface wlp3s0
- wlp3s0: State: DISCONNECTED -> DISCONNECTED
- nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- random: Got 20/20 bytes from /dev/random
- wlp3s0: State: DISCONNECTED -> SCANNING
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x98fe490
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x98fe490 after 0.000029 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan trigger failed: ret=-16 (Device or resource busy)
- wlp3s0: State: SCANNING -> DISCONNECTED
- nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- wlp3s0: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
- wlp3s0: Radio work 'scan'@0x98fe490 done in 0.000163 seconds
- wlp3s0: Setting scan request: 1.000000 sec
- EAPOL: disable timer tick
- wlp3s0: State: DISCONNECTED -> SCANNING
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x98fe490
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x98fe490 after 0.000025 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Scan trigger failed: ret=-16 (Device or resource busy)
- wlp3s0: State: SCANNING -> DISCONNECTED
- nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- wlp3s0: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
- wlp3s0: Radio work 'scan'@0x98fe490 done in 0.000135 seconds
- wlp3s0: Setting scan request: 1.000000 sec
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (11 BSSes)
- wlp3s0: BSS: Start scan result update 1
- wlp3s0: BSS: Add new id 0 BSSID c0:c1:c0:89:39:86 SSID 'edo'
- wlp3s0: BSS: Add new id 1 BSSID 74:44:01:35:f0:42 SSID 'NETGEAR09'
- wlp3s0: BSS: Add new id 2 BSSID 08:86:3b:29:51:7e SSID 'belkin.17e'
- wlp3s0: BSS: Add new id 3 BSSID 74:44:01:35:f0:41 SSID 'NETGEAR09-5G'
- wlp3s0: BSS: Add new id 4 BSSID 94:44:52:b0:13:a3 SSID 'belkin.36a6'
- wlp3s0: BSS: Add new id 5 BSSID b4:75:0e:22:9c:90 SSID 'belkin.c90'
- wlp3s0: BSS: Add new id 6 BSSID 6c:b0:ce:ee:de:4d SSID 'NETGEAR28'
- wlp3s0: BSS: Add new id 7 BSSID 00:24:7b:63:ce:d8 SSID 'myqwest1015'
- wlp3s0: BSS: Add new id 8 BSSID 00:26:f2:bc:1e:18 SSID 'Supreme'
- wlp3s0: BSS: Add new id 9 BSSID 00:23:69:f1:0d:b7 SSID 'linksys'
- wlp3s0: BSS: Add new id 10 BSSID 00:00:00:00:00:00 SSID ''
- BSS: last_scan_res_used=11/32
- wlp3s0: New scan results available (own=0 ext=0)
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: c0:c1:c0:89:39:86 ssid='edo' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-16 wps
- wlp3s0: selected based on RSN IE
- wlp3s0: selected BSS c0:c1:c0:89:39:86 ssid='edo'
- wlp3s0: Considering connect request: reassociate: 0 selected: c0:c1:c0:89:39:86 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: DISCONNECTED ssid=0x98eee20 current_ssid=(nil)
- wlp3s0: Request association with c0:c1:c0:89:39:86
- wlp3s0: Add radio work 'sme-connect'@0x990a0e8
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'sme-connect'@0x990a0e8 after 0.000032 second wait
- wlp3s0: Automatic auth_alg selection: 0x1
- wlp3s0: Overriding auth_alg selection: 0x1
- RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
- RSN: Search for BSSID c0:c1:c0:89:39:86
- RSN: No PMKSA cache entry found
- wlp3s0: RSN: using IEEE 802.11i/D9.0
- wlp3s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
- wlp3s0: WPA: Selected mgmt group cipher 32
- wlp3s0: WPA: clearing AP WPA IE
- WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
- wlp3s0: WPA: using GTK CCMP
- wlp3s0: WPA: using PTK CCMP
- wlp3s0: WPA: using KEY_MGMT WPA-PSK
- wlp3s0: WPA: not using MGMT group cipher
- WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
- FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
- RRM: Determining whether RRM can be used - device support: 0x0
- RRM: No RRM in network
- wlp3s0: Cancelling scan request
- wlp3s0: SME: Trying to authenticate with c0:c1:c0:89:39:86 (SSID='edo' freq=2412 MHz)
- wlp3s0: State: DISCONNECTED -> AUTHENTICATING
- EAPOL: External notification - EAP success=0
- EAPOL: External notification - EAP fail=0
- EAPOL: External notification - portControl=Auto
- nl80211: Authenticate (ifindex=4)
- * bssid=c0:c1:c0:89:39:86
- * freq=2412
- * SSID - hexdump_ascii(len=3):
- 65 64 6f edo
- * IEs - hexdump(len=0): [NULL]
- * Auth Type 0
- nl80211: Authentication request send successfully
- nl80211: Event message available
- nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
- nl80211: New station c0:c1:c0:89:39:86
- nl80211: Event message available
- nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
- nl80211: Delete station c0:c1:c0:89:39:86
- nl80211: Event message available
- nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
- nl80211: MLME event 37; timeout with c0:c1:c0:89:39:86
- wlp3s0: Event AUTH_TIMED_OUT (14) received
- wlp3s0: SME: Authentication timed out
- wlp3s0: Radio work 'sme-connect'@0x990a0e8 done in 0.609160 seconds
- Added BSSID c0:c1:c0:89:39:86 into blacklist
- wlp3s0: Blacklist count 1 --> request scan in 100 ms
- wlp3s0: Setting scan request: 0.100000 sec
- wlp3s0: State: AUTHENTICATING -> DISCONNECTED
- nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- EAPOL: External notification - EAP success=0
- wlp3s0: State: DISCONNECTED -> SCANNING
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x990a0e8
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x990a0e8 after 0.000023 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000065 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.540066 seconds
- nl80211: Received scan results (10 BSSes)
- wlp3s0: BSS: Start scan result update 2
- BSS: last_scan_res_used=10/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x990a0e8 done in 1.542939 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-74 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-82
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-92
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90
- wlp3s0: skip - SSID not known
- wlp3s0: No APs found - clear blacklist and try again
- Removed BSSID c0:c1:c0:89:39:86 from blacklist (clear)
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-74 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-82
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-92
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90
- wlp3s0: skip - SSID not known
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.516391 seconds
- nl80211: Received scan results (10 BSSes)
- wlp3s0: BSS: Start scan result update 3
- wlp3s0: BSS: Remove id 0 BSSID c0:c1:c0:89:39:86 SSID 'edo' due to no match in scan
- BSS: last_scan_res_used=10/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x9905520
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x9905520 after 0.000027 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000056 seconds
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.651572 seconds
- nl80211: Received scan results (10 BSSes)
- wlp3s0: BSS: Start scan result update 4
- BSS: last_scan_res_used=10/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x9905520 done in 1.654510 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-78
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-85 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-77 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-92
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90
- wlp3s0: skip - SSID not known
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.667510 seconds
- nl80211: Received scan results (9 BSSes)
- wlp3s0: BSS: Start scan result update 5
- BSS: last_scan_res_used=9/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x990a520
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x990a520 after 0.000028 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000056 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.652266 seconds
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 6
- wlp3s0: BSS: Add new id 11 BSSID c0:c1:c0:89:39:86 SSID 'edo'
- wlp3s0: BSS: Add new id 12 BSSID 04:a1:51:a0:8b:d9 SSID 'NETGEAR11'
- wlp3s0: BSS: Add new id 13 BSSID 30:46:9a:64:1e:f7 SSID 'iamGroot'
- wlp3s0: BSS: Remove id 8 BSSID 00:26:f2:bc:1e:18 SSID 'Supreme' due to no match in scan
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x990a520 done in 1.655062 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: c0:c1:c0:89:39:86 ssid='edo' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-69 wps
- wlp3s0: selected based on RSN IE
- wlp3s0: selected BSS c0:c1:c0:89:39:86 ssid='edo'
- wlp3s0: Considering connect request: reassociate: 0 selected: c0:c1:c0:89:39:86 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x98eee20 current_ssid=(nil)
- wlp3s0: Request association with c0:c1:c0:89:39:86
- wlp3s0: Re-association to the same ESS
- wlp3s0: Add radio work 'sme-connect'@0x990a520
- wlp3s0: First radio work item in the queue - schedule start immediately
- RSN: Ignored PMKID candidate without preauth flag
- wlp3s0: Starting radio work 'sme-connect'@0x990a520 after 0.000037 second wait
- wlp3s0: Automatic auth_alg selection: 0x1
- wlp3s0: Overriding auth_alg selection: 0x1
- RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
- RSN: Search for BSSID c0:c1:c0:89:39:86
- RSN: No PMKSA cache entry found
- wlp3s0: RSN: using IEEE 802.11i/D9.0
- wlp3s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
- wlp3s0: WPA: Selected mgmt group cipher 32
- wlp3s0: WPA: clearing AP WPA IE
- WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
- wlp3s0: WPA: using GTK CCMP
- wlp3s0: WPA: using PTK CCMP
- wlp3s0: WPA: using KEY_MGMT WPA-PSK
- wlp3s0: WPA: not using MGMT group cipher
- WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
- FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
- RRM: Determining whether RRM can be used - device support: 0x0
- RRM: No RRM in network
- wlp3s0: Cancelling scan request
- wlp3s0: SME: Trying to authenticate with c0:c1:c0:89:39:86 (SSID='edo' freq=2412 MHz)
- wlp3s0: State: SCANNING -> AUTHENTICATING
- EAPOL: External notification - EAP success=0
- EAPOL: External notification - EAP fail=0
- EAPOL: External notification - portControl=Auto
- nl80211: Authenticate (ifindex=4)
- * bssid=c0:c1:c0:89:39:86
- * freq=2412
- * SSID - hexdump_ascii(len=3):
- 65 64 6f edo
- * IEs - hexdump(len=0): [NULL]
- * Auth Type 0
- nl80211: Authentication request send successfully
- nl80211: Event message available
- nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
- nl80211: New station c0:c1:c0:89:39:86
- nl80211: Event message available
- nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
- nl80211: Delete station c0:c1:c0:89:39:86
- nl80211: Event message available
- nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
- nl80211: MLME event 37; timeout with c0:c1:c0:89:39:86
- wlp3s0: Event AUTH_TIMED_OUT (14) received
- wlp3s0: SME: Authentication timed out
- wlp3s0: Radio work 'sme-connect'@0x990a520 done in 0.608447 seconds
- Added BSSID c0:c1:c0:89:39:86 into blacklist
- wlp3s0: Blacklist count 2 --> request scan in 500 ms
- wlp3s0: Setting scan request: 0.500000 sec
- wlp3s0: State: AUTHENTICATING -> DISCONNECTED
- nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- EAPOL: External notification - EAP success=0
- wlp3s0: State: DISCONNECTED -> SCANNING
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x990a520
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x990a520 after 0.000026 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000105 seconds
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.303324 seconds
- nl80211: Received scan results (11 BSSes)
- wlp3s0: BSS: Start scan result update 7
- BSS: last_scan_res_used=11/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x990a520 done in 1.552614 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-65 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-78
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-87
- wlp3s0: skip - SSID not known
- wlp3s0: 10: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: No APs found - clear blacklist and try again
- Removed BSSID c0:c1:c0:89:39:86 from blacklist (clear)
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-65 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-78
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-87
- wlp3s0: skip - SSID not known
- wlp3s0: 10: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.635403 seconds
- nl80211: Received scan results (11 BSSes)
- wlp3s0: BSS: Start scan result update 8
- wlp3s0: BSS: Remove id 11 BSSID c0:c1:c0:89:39:86 SSID 'edo' due to no match in scan
- BSS: last_scan_res_used=11/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x9905760
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x9905760 after 0.000028 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000056 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.546610 seconds
- nl80211: Received scan results (11 BSSes)
- wlp3s0: BSS: Start scan result update 9
- BSS: last_scan_res_used=11/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x9905760 done in 1.549722 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-71 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-84
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-88
- wlp3s0: skip - SSID not known
- wlp3s0: 10: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.551094 seconds
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 10
- wlp3s0: BSS: Add new id 14 BSSID 00:26:f2:bc:1e:18 SSID 'Supreme'
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x9900250
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x9900250 after 0.000028 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000059 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.548883 seconds
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 11
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x9900250 done in 1.551710 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-71 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-82
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91
- wlp3s0: skip - SSID mismatch
- wlp3s0: 10: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-87
- wlp3s0: skip - SSID not known
- wlp3s0: 11: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.624560 seconds
- nl80211: send_and_recv->nl_recvmsgs failed: -33
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 12
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x9905538
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x9905538 after 0.000028 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000098 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.546844 seconds
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 13
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x9905538 done in 1.549989 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-66 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-86
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91
- wlp3s0: skip - SSID mismatch
- wlp3s0: 10: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-82
- wlp3s0: skip - SSID not known
- wlp3s0: 11: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.578336 seconds
- nl80211: Received scan results (13 BSSes)
- wlp3s0: BSS: Start scan result update 14
- wlp3s0: BSS: Add new id 15 BSSID 94:44:52:ba:23:a5 SSID 'belkin.36a3'
- BSS: last_scan_res_used=13/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x990a520
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x990a520 after 0.000028 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000066 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.546494 seconds
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 15
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x990a520 done in 1.549368 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-69 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-86
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 94:44:52:ba:23:a5 ssid='belkin.36a3' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-91 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91
- wlp3s0: skip - SSID mismatch
- wlp3s0: 10: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 11: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88
- wlp3s0: skip - SSID not known
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.550425 seconds
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 16
- wlp3s0: BSS: Remove id 13 BSSID 30:46:9a:64:1e:f7 SSID 'iamGroot' due to no match in scan
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x9905538
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x9905538 after 0.000026 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000056 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.652180 seconds
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 17
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x9905538 done in 1.654989 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-67 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-82
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: 94:44:52:ba:23:a5 ssid='belkin.36a3' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-91 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-92 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 9: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91
- wlp3s0: skip - SSID mismatch
- wlp3s0: 10: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-88
- wlp3s0: skip - SSID not known
- wlp3s0: 11: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.550013 seconds
- nl80211: Received scan results (12 BSSes)
- wlp3s0: BSS: Start scan result update 18
- BSS: last_scan_res_used=12/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x9905538
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x9905538 after 0.000028 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000190 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.649348 seconds
- nl80211: Received scan results (11 BSSes)
- wlp3s0: BSS: Start scan result update 19
- wlp3s0: BSS: Add new id 16 BSSID 00:71:c2:e2:53:ca SSID 'xfinitywifi'
- BSS: last_scan_res_used=11/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x9905538 done in 1.654481 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-71 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-88 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-84
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: 94:44:52:ba:23:a5 ssid='belkin.36a3' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-91 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-84
- wlp3s0: skip - SSID not known
- wlp3s0: 9: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 10: 00:71:c2:e2:53:ca ssid='xfinitywifi' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-93
- wlp3s0: skip - SSID mismatch
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.635224 seconds
- nl80211: Received scan results (11 BSSes)
- wlp3s0: BSS: Start scan result update 20
- wlp3s0: BSS: Remove id 12 BSSID 04:a1:51:a0:8b:d9 SSID 'NETGEAR11' due to no match in scan
- wlp3s0: BSS: Remove id 14 BSSID 00:26:f2:bc:1e:18 SSID 'Supreme' due to no match in scan
- BSS: last_scan_res_used=11/32
- wlp3s0: New scan results available (own=0 ext=1)
- wlp3s0: Do not use results from externally requested scan operation for network selection
- wlp3s0: Starting AP scan for wildcard SSID
- wlp3s0: Add radio work 'scan'@0x98efad8
- wlp3s0: First radio work item in the queue - schedule start immediately
- wlp3s0: Starting radio work 'scan'@0x98efad8 after 0.000028 second wait
- wlp3s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: Own scan request started a scan in 0.000059 seconds
- RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
- wlp3s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
- wlp3s0: Event SCAN_RESULTS (3) received
- wlp3s0: Scan completed in 1.646992 seconds
- nl80211: Received scan results (11 BSSes)
- wlp3s0: BSS: Start scan result update 21
- BSS: last_scan_res_used=11/32
- wlp3s0: New scan results available (own=1 ext=0)
- wlp3s0: Radio work 'scan'@0x98efad8 done in 1.652111 seconds
- wlp3s0: Selecting BSS from priority group 0
- wlp3s0: 0: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-83
- wlp3s0: skip - SSID mismatch
- wlp3s0: 1: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-79 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-91 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-87 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 4: 94:44:52:ba:23:a5 ssid='belkin.36a3' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-91 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 5: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-84 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 6: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-89 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 7: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-91 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 8: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-89
- wlp3s0: skip - SSID not known
- wlp3s0: 9: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90 wps
- wlp3s0: skip - SSID mismatch
- wlp3s0: 10: 00:71:c2:e2:53:ca ssid='xfinitywifi' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-93
- wlp3s0: skip - SSID mismatch
- wlp3s0: No suitable network found
- wlp3s0: Setting scan request: 5.000000 sec
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
- wlp3s0: nl80211: Scan trigger
- wlp3s0: Event SCAN_STARTED (47) received
- wlp3s0: External program started a scan
- wlp3s0: Removing interface wlp3s0
- wlp3s0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=SCANNING
- wlp3s0: State: SCANNING -> DISCONNECTED
- nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- wlp3s0: WPA: Clear old PMK and PTK
- wlp3s0: BSS: Remove id 2 BSSID 08:86:3b:29:51:7e SSID 'belkin.17e' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 1 BSSID 74:44:01:35:f0:42 SSID 'NETGEAR09' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 3 BSSID 74:44:01:35:f0:41 SSID 'NETGEAR09-5G' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 4 BSSID 94:44:52:b0:13:a3 SSID 'belkin.36a6' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 15 BSSID 94:44:52:ba:23:a5 SSID 'belkin.36a3' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 7 BSSID 00:24:7b:63:ce:d8 SSID 'myqwest1015' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 5 BSSID b4:75:0e:22:9c:90 SSID 'belkin.c90' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 6 BSSID 6c:b0:ce:ee:de:4d SSID 'NETGEAR28' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 10 BSSID 00:00:00:00:00:00 SSID '' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 9 BSSID 00:23:69:f1:0d:b7 SSID 'linksys' due to wpa_bss_flush
- wlp3s0: BSS: Remove id 16 BSSID 00:71:c2:e2:53:ca SSID 'xfinitywifi' due to wpa_bss_flush
- wlp3s0: Cancelling scan request
- wlp3s0: Cancelling authentication timeout
- Remove interface wlp3s0 from radio phy0
- Remove radio phy0
- nl80211: deinit ifname=wlp3s0 disabled_11b_rates=0
- nl80211: Remove monitor interface: refcount=0
- netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
- nl80211: Set mode ifindex 4 iftype 2 (STATION)
- nl80211: Unsubscribe mgmt frames handle 0x81067c41 (mode change)
- wlp3s0: CTRL-EVENT-TERMINATING
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement