Downloading touchpad firmware
(rose_v1.1.8546-ee1861e9e.bin)

Flashing touchpad firmware -- do not touch the touchpad while updating!

Error flashing touchpad firmware:

flashrom v0.9.9  : 980235d1 : Oct 24 2019 22:45:42 UTC on Linux 4.4.196-16940-geab5e6346fdb (x86_64)
flashrom was built with unknown PCI library, LLVM Clang 9.0.0 (/var/cache/chromeos-cache/distfiles/host/egit-src/llvm-project 6b043f051836635a1e88da4d0464e6569bd7b625), big endian
Command line (8 args): /usr/sbin/flashrom -p ec:type=tp -i EC_RW -w -o /tmp/flashrom.log rose_v1.1.8546-ee1861e9e.bin
Acquiring lock (timeout=180 sec)...
Opened file lock "/run/lock/firmware_utility_lock"
Lock acquired.
disable_power_management: Disabling power management.
Calibrating delay loop... OS timer resolution is 1 usecs, 2819M loops per second, 10 myus = 9 us, 100 myus = 98 us, 1000 myus = 1015 us, 10000 myus = 10258 us, 4 myus = 4 us, OK.
Initializing internal programmer
Found candidate at: 00000500-00000528
Found coreboot table at 0x00000500.
Found candidate at: 00000000-00000560
Found coreboot table at 0x00000000.
coreboot table found at 0x7aabe000.
coreboot header(24) checksum: 156a table(1352) checksum: 5373 entries: 45
Vendor ID: Google, part ID: Eve
DMI string system-manufacturer: "Google"
DMI string system-product-name: "Eve"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "Google"
DMI string baseboard-product-name: "Eve"
DMI string baseboard-version: "1.0"
DMI string chassis-type: "Desktop"
get_target_bus_from_chipset() returns 0x10.
Found chipset "Intel Skylake" with PCI ID 8086:9d24. Enabling flash write...
BIOS_CNTL = 0x8b: BIOS Lock Enable: enabled, BIOS Write Enable: enabled
SPI BAR is = 0xd123d000
GCS = 0x8b: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (SPI)
SPIBAR = 0x00007bad0d561000 + 0x0000
ich_ generation 16
0x04: 0x000ee000 (HSFSC)
WARNING: SPI Configuration Lockdown activated.
0x08: 0x00ffffc0 (FADDR)
0x50: 0x00004acb (FRAP)
BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0xcb
0x54: 0x00000000 (FREG0: Flash Descriptor)
0x00000000-0x00000fff is read-only
0x58: 0x0fff0200 (FREG1: BIOS)
0x00200000-0x00ffffff is read-write
0x5C: 0x01ff0001 (FREG2: Management Engine)
0x00001000-0x001fffff is locked
0x60: 0x00007fff (FREG3: Gigabit Ethernet)
Gigabit Ethernet region is unused.
0x64: 0x00007fff (FREG4: Platform Data)
Platform Data region is unused.
0x68: 0x00007fff (FREG5: Device Expansion)
Device Expansion region is unused.
0x6C: 0x00007fff (FREG6: Reserved 1)
Reserved 1 region is unused.
0x70: 0x00007fff (FREG7: Reserved 2)
Reserved 2 region is unused.
0x74: 0x00007fff (FREG8: Embedded Controller)
Reading flash descriptors mapped by the chipset via FDOC/FDOD... done.
Embedded Controller region is unused.
0x84: 0x00000000 (PR0, unused)
0x88: 0x00000000 (PR1, unused)
0x8C: 0x00000000 (PR2, unused)
0x90: 0x00000000 (PR3, unused)
0x94: 0x00000000 (PR4, unused)
0x98: 0x00000000 (PR5, unused)
0x9C: 0x00000000 (PR6, unused)
0xA0: 0xfe000080 (PR7)
0x00080000-0x01e00fff is read-only
0xA4: 0xb32d5006 (PR8)
0x01006000-0x0132dfff is read-only
Reading flash descriptors mapped by the chipset via FDOC/FDOD... done.
=== Content Section ===
FLVALSIG 0x0ff0a55a
FLMAP0   0x00040003
FLMAP1   0x42100208
FLMAP2   0x00310330

--- Details ---
NR          (Number of Regions):                     1
FRBA        (Flash Region Base Address):         0x040
NC          (Number of Components):                  1
FCBA        (Flash Component Base Address):      0x030
ISL         (ICH/PCH Strap Length):                 66
FISBA/FPSBA (Flash ICH/PCH Strap Base Address):  0x100
NM          (Number of Masters):                     3
FMBA        (Flash Master Base Address):         0x080
MSL/PSL     (MCH/PROC Strap Length):                 3
FMSBA       (Flash MCH/PROC Strap Base Address): 0x300

=== Component Section ===
FLCOMP   0x125c00f5
FLILL    0xad604221

--- Details ---
Component 1 density:            16 MB
Component 2 is not used.
Read Clock Frequency:           reserved
Read ID and Status Clock Freq.: reserved
Write and Erase Clock Freq.:    reserved
Fast Read is supported.
Fast Read Clock Frequency:      reserved
Invalid instruction 0:          0x21
Invalid instruction 1:          0x42
Invalid instruction 2:          0x60
Invalid instruction 3:          0xad

=== Region Section ===
FLREG0   0x00000000
FLREG1   0x0fff0200

--- Details ---
Region 0 (Descr.) 0x00000000 - 0x00000fff
Region 1 (BIOS  ) 0x00200000 - 0x00ffffff

prettyprint_ich_descriptor_master: cs=16
=== Master Section ===
FLMSTR1  0x00a00b00
FLMSTR2  0x00c00d00
FLMSTR3  0x00800800
FLMSTR4  0x00000000
FLMSTR5  0x10010100

--- Details ---
      Descr. BIOS ME GbE Plat EC
BIOS    r     rw      rw
ME      r         rw  rw
GbE                   rw
Plat
EC      r                     rw

OK.
Target tp used
cros_ec_probe_dev: probing for CROS_EC at /dev/cros_tp
cros_ec_probe_lpc():518 ...
Target tp used
cros_ec_lpc only supports "ec" type devices.
mec1308 only supports "ec" type devices
mec1308_probe_spi_flash(): entered
mec1308 only supports "ec" type devices
ene_probe_spi_flash
ene_lpc only supports "ec" type devices
Error: Programmer initialization failed.
Restoring PCI config space for 00:1f:5 reg 0xdc
restore_power_management: Re-enabling power management.

This function sometimes doesn't work under Linux, in which case it is
recommended to try under ChromiumOS.