dmesg.txt

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-38-generic (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #61-Ubuntu SMP Tue Feb 19 12:18:21 UTC 2013 (Ubuntu 3.2.0-38.61-generic 3.2.37)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-38-generic root=UUID=2e4543d3-22aa-45e1-8adb-f95cfe57a697 ro vesafb.invalid=1 splash quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000d6f90000 (usable)
[    0.000000]  BIOS-e820: 00000000d6f90000 - 00000000d6fb3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000d6fb3000 - 00000000d6ff0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000d6ff0000 - 00000000d7000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z68P-DS3/Z68P-DS3, BIOS FD 02/21/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0D8000000 mask FF8000000 uncachable
[    0.000000]   3 base 0D7800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask E00000000 write-back
[    0.000000]   6 base 300000000 mask F00000000 write-back
[    0.000000]   7 base 400000000 mask FE0000000 write-back
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 2, base: 3456MB, range: 128MB, type UC
[    0.000000] reg 3, base: 3448MB, range: 8MB, type UC
[    0.000000] reg 4, base: 4GB, range: 4GB, type WB
[    0.000000] reg 5, base: 8GB, range: 8GB, type WB
[    0.000000] reg 6, base: 12GB, range: 4GB, type WB
[    0.000000] reg 7, base: 16GB, range: 512MB, type WB
[    0.000000] total RAM covered: 16248M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 16M     num_reg: 8      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3328MB, range: 128MB, type WB
[    0.000000] reg 4, base: 3448MB, range: 8MB, type UC
[    0.000000] reg 5, base: 4GB, range: 4GB, type WB
[    0.000000] reg 6, base: 8GB, range: 8GB, type WB
[    0.000000] reg 7, base: 16GB, range: 512MB, type WB
[    0.000000] e820 update range: 00000000d7800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xd6f90 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f5ab0] f5ab0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000d6f90000
[    0.000000]  0000000000 - 00d6e00000 page 2M
[    0.000000]  00d6e00000 - 00d6f90000 page 4k
[    0.000000] kernel direct mapping tables up to d6f90000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[    0.000000]  0100000000 - 041fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 41fe00000 @ d6f82000-d6f90000
[    0.000000] RAMDISK: 36374000 - 371b2000
[    0.000000] ACPI: RSDP 00000000000f7660 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000d6fb3040 00050 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000d6fb3100 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000d6fb31c0 05033 (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
[    0.000000] ACPI: FACS 00000000d6f90000 00040
[    0.000000] ACPI: MSDM 00000000d6fb8340 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 00000000d6fb8400 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000d6fb8480 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: ASPT 00000000d6fb8600 00034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
[    0.000000] ACPI: SSPT 00000000d6fb8640 02324 (v01 GBT    SsptHead 312E3042 UTBG 01010101)
[    0.000000] ACPI: EUDS 00000000d6fba970 000C0 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 00000000d6fbaa30 008EA (v01 GBT    GBT   B0 5455312E BG?? 45240101)
[    0.000000] ACPI: APIC 00000000d6fb8240 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000d6fbb340 03E74 (v01  INTEL PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: MATS 00000000d6fbf1c0 0A3A3 (v01        MATS RCM 80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000041fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[    0.000000]   NODE_DATA [000000041fdfb000 - 000000041fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0041fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000d6f90
[    0.000000]     0: 0x00100000 -> 0x0041fe00
[    0.000000] On node 0 totalpages: 4156702
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 860112 pages, LIFO batch:31
[    0.000000]   Normal zone: 51192 pages used for memmap
[    0.000000]   Normal zone: 3225096 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000d6f90000 - 00000000d6fb3000
[    0.000000] PM: Registered nosave memory: 00000000d6fb3000 - 00000000d6ff0000
[    0.000000] PM: Registered nosave memory: 00000000d6ff0000 - 00000000d7000000
[    0.000000] PM: Registered nosave memory: 00000000d7000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d7000000 (gap: d7000000:1d000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041fa00000 s83136 r8192 d23360 u262144
[    0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4089121
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-38-generic root=UUID=2e4543d3-22aa-45e1-8adb-f95cfe57a697 ro vesafb.invalid=1 splash quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16269292k/17299456k available (6570k kernel code, 672648k absent, 357516k reserved, 6635k data, 920k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 133169152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2793.616 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.23 BogoMIPS (lpj=11174464)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000022] Security Framework initialized
[    0.000033] AppArmor: AppArmor initialized
[    0.000034] Yama: becoming mindful.
[    0.000872] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.003571] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.004723] Mount-cache hash table entries: 256
[    0.004824] Initializing cgroup subsys cpuacct
[    0.004827] Initializing cgroup subsys memory
[    0.004833] Initializing cgroup subsys devices
[    0.004835] Initializing cgroup subsys freezer
[    0.004836] Initializing cgroup subsys blkio
[    0.004840] Initializing cgroup subsys perf_event
[    0.004860] CPU: Physical Processor ID: 0
[    0.004861] CPU: Processor Core ID: 0
[    0.004865] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.004866] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004868] mce: CPU supports 9 MCE banks
[    0.004879] CPU0: Thermal monitoring enabled (TM1)
[    0.004884] using mwait in idle threads.
[    0.006903] ACPI: Core revision 20110623
[    0.011658] ftrace: allocating 26545 entries in 105 pages
[    0.019681] x2apic not enabled, IRQ remapping init failed
[    0.020075] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059699] CPU0: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz stepping 07
[    0.164550] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.164554] PEBS disabled due to CPU errata.
[    0.164556] ... version:                3
[    0.164557] ... bit width:              48
[    0.164558] ... generic registers:      4
[    0.164559] ... value mask:             0000ffffffffffff
[    0.164560] ... max period:             000000007fffffff
[    0.164561] ... fixed-purpose events:   3
[    0.164562] ... event mask:             000000070000000f
[    0.164679] NMI watchdog enabled, takes one hw-pmu counter.
[    0.164734] Booting Node   0, Processors  #1
[    0.164736] smpboot cpu 1: start_ip = 99000
[    1.934026] NMI watchdog enabled, takes one hw-pmu counter.
[    1.934095]  #2
[    1.934096] smpboot cpu 2: start_ip = 99000
[    2.061824] NMI watchdog enabled, takes one hw-pmu counter.
[    2.061887]  #3
[    2.061888] smpboot cpu 3: start_ip = 99000
[    3.403785] NMI watchdog enabled, takes one hw-pmu counter.
[    3.403847]  #4
[    3.403848] smpboot cpu 4: start_ip = 99000
[    3.531552] NMI watchdog enabled, takes one hw-pmu counter.
[    3.531625]  #5
[    3.531627] smpboot cpu 5: start_ip = 99000
[    5.097212] NMI watchdog enabled, takes one hw-pmu counter.
[    5.097277]  #6
[    5.097278] smpboot cpu 6: start_ip = 99000
[    5.256964] NMI watchdog enabled, takes one hw-pmu counter.
[    5.257028]  #7 Ok.
[    5.257029] smpboot cpu 7: start_ip = 99000
[    5.927977] NMI watchdog enabled, takes one hw-pmu counter.
[    5.928001] Brought up 8 CPUs
[    5.928003] Total of 8 processors activated (44698.18 BogoMIPS).
[    5.939512] devtmpfs: initialized
[    5.940395] EVM: security.selinux
[    5.940396] EVM: security.SMACK64
[    5.940397] EVM: security.capability
[    5.940414] PM: Registering ACPI NVS region at d6f90000 (143360 bytes)
[    5.942362] print_constraints: dummy:
[    5.942389] RTC time:  7:28:39, date: 03/19/13
[    5.942413] NET: Registered protocol family 16
[    5.942485] Trying to unpack rootfs image as initramfs...
[    5.942489] ACPI: bus type pci registered
[    5.942536] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    5.942538] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    5.952523] PCI: Using configuration type 1 for base access
[    5.954689] bio: create slab <bio-0> at 0
[    5.954742] ACPI: Added _OSI(Module Device)
[    5.954743] ACPI: Added _OSI(Processor Device)
[    5.954745] ACPI: Added _OSI(3.0 _SCP Extensions)
[    5.954746] ACPI: Added _OSI(Processor Aggregator Device)
[    5.955353] ACPI: EC: Look up EC in DSDT
[    5.960353] ACPI: Interpreter enabled
[    5.960356] ACPI: (supports S0 S1 S4 S5)
[    5.960367] ACPI: Using IOAPIC for interrupt routing
[    5.964195] ACPI: No dock devices found.
[    5.964196] HEST: Table not found.
[    5.964199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    5.964232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    5.964298] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    5.964300] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    5.964302] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    5.964303] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    5.964305] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    5.964307] pci_root PNP0A03:00: host bridge window [mem 0xdfa00000-0xfebfffff]
[    5.964315] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    5.964346] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
[    5.964355] pci 0000:00:02.0: reg 10: [mem 0xfb800000-0xfbbfffff 64bit]
[    5.964361] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    5.964365] pci 0000:00:02.0: reg 20: [io  0xff00-0xff3f]
[    5.964412] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    5.964434] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    5.964506] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    5.964509] pci 0000:00:16.0: PME# disabled
[    5.964538] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    5.964558] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[    5.964645] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    5.964649] pci 0000:00:1a.0: PME# disabled
[    5.964670] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    5.964684] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[    5.966022] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    5.966025] pci 0000:00:1b.0: PME# disabled
[    5.966044] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    5.966119] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    5.966123] pci 0000:00:1c.0: PME# disabled
[    5.966144] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    5.966220] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    5.966224] pci 0000:00:1c.2: PME# disabled
[    5.966244] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    5.966320] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    5.966323] pci 0000:00:1c.3: PME# disabled
[    5.966351] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    5.966371] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[    5.966458] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    5.966461] pci 0000:00:1d.0: PME# disabled
[    5.966479] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    5.966538] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
[    5.966654] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[    5.966668] pci 0000:00:1f.2: reg 10: [io  0xfe00-0xfe07]
[    5.966675] pci 0000:00:1f.2: reg 14: [io  0xfd00-0xfd03]
[    5.966682] pci 0000:00:1f.2: reg 18: [io  0xfc00-0xfc07]
[    5.966689] pci 0000:00:1f.2: reg 1c: [io  0xfb00-0xfb03]
[    5.966696] pci 0000:00:1f.2: reg 20: [io  0xfa00-0xfa0f]
[    5.966703] pci 0000:00:1f.2: reg 24: [io  0xf900-0xf90f]
[    5.966745] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    5.966759] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[    5.966778] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    5.966809] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[    5.966822] pci 0000:00:1f.5: reg 10: [io  0xf700-0xf707]
[    5.966829] pci 0000:00:1f.5: reg 14: [io  0xf600-0xf603]
[    5.966836] pci 0000:00:1f.5: reg 18: [io  0xf500-0xf507]
[    5.966843] pci 0000:00:1f.5: reg 1c: [io  0xf400-0xf403]
[    5.966851] pci 0000:00:1f.5: reg 20: [io  0xf300-0xf30f]
[    5.966858] pci 0000:00:1f.5: reg 24: [io  0xf200-0xf20f]
[    5.966955] pci 0000:01:00.0: [1b4b:9120] type 0 class 0x000106
[    5.966972] pci 0000:01:00.0: reg 10: [io  0xdf00-0xdf07]
[    5.966984] pci 0000:01:00.0: reg 14: [io  0xde00-0xde03]
[    5.966997] pci 0000:01:00.0: reg 18: [io  0xdd00-0xdd07]
[    5.967009] pci 0000:01:00.0: reg 1c: [io  0xdc00-0xdc03]
[    5.967021] pci 0000:01:00.0: reg 20: [io  0xdb00-0xdb0f]
[    5.967033] pci 0000:01:00.0: reg 24: [mem 0xfbeff000-0xfbeff7ff]
[    5.967045] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    5.967103] pci 0000:01:00.0: PME# supported from D3hot
[    5.967107] pci 0000:01:00.0: PME# disabled
[    5.967143] pci 0000:01:00.1: [1b4b:91a4] type 0 class 0x000101
[    5.967160] pci 0000:01:00.1: reg 10: [io  0xda00-0xda07]
[    5.967172] pci 0000:01:00.1: reg 14: [io  0xd900-0xd903]
[    5.967184] pci 0000:01:00.1: reg 18: [io  0xd800-0xd807]
[    5.967196] pci 0000:01:00.1: reg 1c: [io  0xd700-0xd703]
[    5.967208] pci 0000:01:00.1: reg 20: [io  0xd600-0xd60f]
[    5.967220] pci 0000:01:00.1: reg 24: [mem 0xfbefe000-0xfbefe00f]
[    5.967233] pci 0000:01:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
[    5.967291] pci 0000:01:00.1: PME# supported from D3hot
[    5.967295] pci 0000:01:00.1: PME# disabled
[    5.971843] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    5.971846] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    5.971850] pci 0000:00:1c.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    5.971918] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[    5.971937] pci 0000:02:00.0: reg 10: [io  0xee00-0xeeff]
[    5.971970] pci 0000:02:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[    5.971992] pci 0000:02:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[    5.972083] pci 0000:02:00.0: supports D1 D2
[    5.972084] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.972089] pci 0000:02:00.0: PME# disabled
[    5.979826] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    5.979830] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    5.979837] pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    5.979899] pci 0000:03:00.0: [1283:8892] type 1 class 0x000604
[    5.980042] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    5.980183] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[    5.980276] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    5.980284] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    5.980286] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    5.980288] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    5.980289] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    5.980291] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    5.980293] pci 0000:00:1e.0:   bridge window [mem 0xdfa00000-0xfebfffff] (subtractive decode)
[    5.980312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    5.980395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    5.980415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    5.980433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    5.980454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    5.980490]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    5.980492]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    5.980493] ACPI _OSC control for PCIe not granted, disabling ASPM
[    5.987046] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    5.987076] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    5.987106] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    5.987135] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    5.987163] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    5.987192] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    5.987220] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    5.987249] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    5.987328] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    5.987334] vgaarb: loaded
[    5.987335] vgaarb: bridge control possible 0000:00:02.0
[    5.987399] i2c-core: driver [aat2870] using legacy suspend method
[    5.987400] i2c-core: driver [aat2870] using legacy resume method
[    5.987443] SCSI subsystem initialized
[    5.987478] libata version 3.00 loaded.
[    5.987506] usbcore: registered new interface driver usbfs
[    5.987514] usbcore: registered new interface driver hub
[    5.987527] usbcore: registered new device driver usb
[    5.987581] PCI: Using ACPI for IRQ routing
[    5.990309] PCI: pci_cache_line_size set to 64 bytes
[    5.990366] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[    5.990368] reserve RAM buffer: 00000000d6f90000 - 00000000d7ffffff
[    5.990370] reserve RAM buffer: 000000041fe00000 - 000000041fffffff
[    5.990436] NetLabel: Initializing
[    5.990437] NetLabel:  domain hash size = 128
[    5.990438] NetLabel:  protocols = UNLABELED CIPSOv4
[    5.990445] NetLabel:  unlabeled traffic allowed by default
[    5.990477] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    5.990481] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    5.992493] Switching to clocksource hpet
[    5.999518] AppArmor: AppArmor Filesystem Enabled
[    5.999535] pnp: PnP ACPI init
[    5.999546] ACPI: bus type pnp registered
[    5.999600] pnp 00:00: [bus 00-3f]
[    5.999603] pnp 00:00: [io  0x0cf8-0x0cff]
[    5.999604] pnp 00:00: [io  0x0000-0x0cf7 window]
[    5.999606] pnp 00:00: [io  0x0d00-0xffff window]
[    5.999607] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    5.999609] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    5.999610] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    5.999612] pnp 00:00: [mem 0xdfa00000-0xfebfffff window]
[    5.999649] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    5.999702] pnp 00:01: [io  0x0010-0x001f]
[    5.999703] pnp 00:01: [io  0x0022-0x003f]
[    5.999704] pnp 00:01: [io  0x0044-0x004d]
[    5.999705] pnp 00:01: [io  0x0050-0x005f]
[    5.999707] pnp 00:01: [io  0x0062-0x0063]
[    5.999708] pnp 00:01: [io  0x0065-0x006f]
[    5.999709] pnp 00:01: [io  0x0074-0x007f]
[    5.999710] pnp 00:01: [io  0x0091-0x0093]
[    5.999711] pnp 00:01: [io  0x00a2-0x00bf]
[    5.999712] pnp 00:01: [io  0x00e0-0x00ef]
[    5.999713] pnp 00:01: [io  0x04d0-0x04d1]
[    5.999714] pnp 00:01: [io  0x0290-0x029f]
[    5.999716] pnp 00:01: [io  0x0800-0x0805]
[    5.999717] pnp 00:01: [io  0x0290-0x0294]
[    5.999718] pnp 00:01: [io  0x0880-0x088f]
[    5.999755] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    5.999756] system 00:01: [io  0x0290-0x029f] has been reserved
[    5.999758] system 00:01: [io  0x0800-0x0805] has been reserved
[    5.999760] system 00:01: [io  0x0290-0x0294] has been reserved
[    5.999761] system 00:01: [io  0x0880-0x088f] has been reserved
[    5.999763] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    5.999771] pnp 00:02: [dma 4]
[    5.999773] pnp 00:02: [io  0x0000-0x000f]
[    5.999774] pnp 00:02: [io  0x0080-0x0090]
[    5.999775] pnp 00:02: [io  0x0094-0x009f]
[    5.999776] pnp 00:02: [io  0x00c0-0x00df]
[    5.999792] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    5.999822] pnp 00:03: [irq 0 disabled]
[    5.999829] pnp 00:03: [irq 8]
[    5.999831] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    5.999848] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    5.999865] pnp 00:04: [io  0x0070-0x0073]
[    5.999882] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    5.999888] pnp 00:05: [io  0x0061]
[    5.999904] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    5.999909] pnp 00:06: [io  0x00f0-0x00ff]
[    5.999913] pnp 00:06: [irq 13]
[    5.999929] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    6.000089] pnp 00:07: [io  0x03f8-0x03ff]
[    6.000093] pnp 00:07: [irq 4]
[    6.000132] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    6.000266] pnp 00:08: [io  0x0378-0x037f]
[    6.000270] pnp 00:08: [irq 7]
[    6.000302] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    6.000379] pnp 00:09: [io  0x0400-0x04cf]
[    6.000380] pnp 00:09: [io  0x04d2-0x04ff]
[    6.000408] system 00:09: [io  0x0400-0x04cf] has been reserved
[    6.000409] system 00:09: [io  0x04d2-0x04ff] has been reserved
[    6.000412] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    6.000419] pnp 00:0a: [io  0x1000-0x107f]
[    6.000420] pnp 00:0a: [io  0x1080-0x10ff]
[    6.000421] pnp 00:0a: [io  0x1100-0x117f]
[    6.000422] pnp 00:0a: [io  0x1180-0x11ff]
[    6.000448] system 00:0a: [io  0x1000-0x107f] has been reserved
[    6.000450] system 00:0a: [io  0x1080-0x10ff] has been reserved
[    6.000451] system 00:0a: [io  0x1100-0x117f] has been reserved
[    6.000453] system 00:0a: [io  0x1180-0x11ff] has been reserved
[    6.000455] system 00:0a: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[    6.000564] pnp 00:0b: [io  0x0454-0x0457]
[    6.000598] system 00:0b: [io  0x0454-0x0457] has been reserved
[    6.000600] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    6.000611] pnp 00:0c: [mem 0xf4000000-0xf7ffffff]
[    6.000643] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
[    6.000645] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    6.002141] pnp 00:0d: [mem 0x000d1400-0x000d3fff]
[    6.002142] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[    6.002144] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[    6.002145] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    6.002146] pnp 00:0d: [mem 0xd6f90000-0xd6feffff]
[    6.002147] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    6.002149] pnp 00:0d: [mem 0x00100000-0xd6f8ffff]
[    6.002150] pnp 00:0d: [mem 0xd6ff0000-0xd6ffffff]
[    6.002151] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    6.002152] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[    6.002154] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    6.002155] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    6.002156] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[    6.002157] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    6.002158] pnp 00:0d: [mem 0x000e0000-0x000effff]
[    6.002160] pnp 00:0d: [mem 0x20000000-0x201fffff]
[    6.002161] pnp 00:0d: [mem 0x40000000-0x400fffff]
[    6.002162] pnp 00:0d: [mem 0xd7000000-0xdf9fffff]
[    6.002201] system 00:0d: [mem 0x000d1400-0x000d3fff] has been reserved
[    6.002202] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[    6.002204] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    6.002206] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    6.002208] system 00:0d: [mem 0xd6f90000-0xd6feffff] could not be reserved
[    6.002209] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    6.002211] system 00:0d: [mem 0x00100000-0xd6f8ffff] could not be reserved
[    6.002213] system 00:0d: [mem 0xd6ff0000-0xd6ffffff] has been reserved
[    6.002214] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    6.002216] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[    6.002218] system 00:0d: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    6.002220] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    6.002221] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[    6.002223] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    6.002224] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[    6.002226] system 00:0d: [mem 0x20000000-0x201fffff] could not be reserved
[    6.002228] system 00:0d: [mem 0x40000000-0x400fffff] could not be reserved
[    6.002229] system 00:0d: [mem 0xd7000000-0xdf9fffff] could not be reserved
[    6.002232] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    6.002243] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[    6.002265] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[    6.002269] pnp: PnP ACPI: found 15 devices
[    6.002270] ACPI: ACPI bus type pnp unregistered
[    6.010027] PCI: max bus depth: 2 pci_try_num: 3
[    6.010075] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfa00000-0xdfafffff pref]
[    6.010077] pci 0000:01:00.0: BAR 6: assigned [mem 0xdfa00000-0xdfa0ffff pref]
[    6.010079] pci 0000:01:00.1: BAR 6: assigned [mem 0xdfa10000-0xdfa1ffff pref]
[    6.010081] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    6.010083] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    6.010088] pci 0000:00:1c.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    6.010091] pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfafffff pref]
[    6.010097] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[    6.010099] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    6.010105] pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    6.010111] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[    6.010134] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    6.010144] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    6.010164] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.010168] pci 0000:00:1c.0: setting latency timer to 64
[    6.010176] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.010179] pci 0000:00:1c.2: setting latency timer to 64
[    6.010186] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    6.010191] pci 0000:00:1c.3: setting latency timer to 64
[    6.010197] pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    6.010205] pci 0000:03:00.0: setting latency timer to 64
[    6.010213] pci 0000:00:1e.0: setting latency timer to 64
[    6.010216] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    6.010217] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    6.010219] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    6.010220] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    6.010222] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    6.010223] pci_bus 0000:00: resource 9 [mem 0xdfa00000-0xfebfffff]
[    6.010225] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    6.010226] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
[    6.010228] pci_bus 0000:01: resource 2 [mem 0xdfa00000-0xdfafffff pref]
[    6.010230] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    6.010231] pci_bus 0000:02: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    6.010233] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    6.010235] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    6.010236] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    6.010238] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    6.010240] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
[    6.010241] pci_bus 0000:05: resource 9 [mem 0xdfa00000-0xfebfffff]
[    6.010264] NET: Registered protocol family 2
[    6.010494] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    6.011176] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    6.012233] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    6.012352] TCP: Hash tables configured (established 524288 bind 65536)
[    6.012354] TCP reno registered
[    6.012368] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    6.012419] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    6.012507] NET: Registered protocol family 1
[    6.014343] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    6.014571] pci 0000:00:02.0: Boot video device
[    6.014583] pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.028113] pci 0000:00:1a.0: PCI INT C disabled
[    6.028134] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.044090] pci 0000:00:1d.0: PCI INT A disabled
[    6.044113] PCI: CLS 4 bytes, default 64
[    6.044115] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    6.044117] Placing 64MB software IO TLB between ffff8800d2f82000 - ffff8800d6f82000
[    6.044118] software IO TLB at phys 0xd2f82000 - 0xd6f82000
[    6.044575] audit: initializing netlink socket (disabled)
[    6.044582] type=2000 audit(1363678118.828:1): initialized
[    6.061457] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    6.063287] VFS: Disk quotas dquot_6.5.2
[    6.063322] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    6.063634] fuse init (API version 7.17)
[    6.063690] msgmni has been set to 31775
[    6.063900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    6.063917] io scheduler noop registered
[    6.063918] io scheduler deadline registered
[    6.063937] io scheduler cfq registered (default)
[    6.064145] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.064160] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    6.064195] intel_idle: MWAIT substates: 0x1120
[    6.064196] intel_idle: v0.4 model 0x2A
[    6.064197] intel_idle: lapic_timer_reliable_states 0xffffffff
[    6.064265] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    6.064269] ACPI: Power Button [PWRB]
[    6.064303] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    6.064305] ACPI: Power Button [PWRF]
[    6.077817] ERST: Table is not found!
[    6.077818] GHES: HEST is not enabled!
[    6.077868] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    6.098243] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    6.167266] Freeing initrd memory: 14584k freed
[    6.304394] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    6.327883] Linux agpgart interface v0.103
[    6.327937] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    6.328014] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    6.329396] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    6.329494] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    6.330432] brd: module loaded
[    6.330915] loop: module loaded
[    6.331000] ahci 0000:01:00.0: version 3.0
[    6.331010] ahci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.331066] ahci 0000:01:00.0: irq 40 for MSI/MSI-X
[    6.331122] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    6.331125] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    6.331130] ahci 0000:01:00.0: setting latency timer to 64
[    6.331319] scsi0 : ahci
[    6.331372] scsi1 : ahci
[    6.331401] ata1: SATA max UDMA/133 abar m2048@0xfbeff000 port 0xfbeff100 irq 40
[    6.331404] ata2: SATA max UDMA/133 abar m2048@0xfbeff000 port 0xfbeff180 irq 40
[    6.331430] ata_piix 0000:00:1f.2: version 2.13
[    6.331439] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.331443] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    6.331473] ata_piix 0000:00:1f.2: setting latency timer to 64
[    6.331640] scsi2 : ata_piix
[    6.331694] scsi3 : ata_piix
[    6.331986] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[    6.331990] ata4: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[    6.332003] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.332007] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    6.332032] ata_piix 0000:00:1f.5: setting latency timer to 64
[    6.332160] scsi4 : ata_piix
[    6.332204] scsi5 : ata_piix
[    6.332433] ata5: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    6.332436] ata6: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    6.332471] pata_acpi 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.332495] pata_acpi 0000:01:00.1: setting latency timer to 64
[    6.332507] pata_acpi 0000:01:00.1: PCI INT B disabled
[    6.332691] Fixed MDIO Bus: probed
[    6.332702] tun: Universal TUN/TAP device driver, 1.6
[    6.332703] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    6.332735] PPP generic driver version 2.4.2
[    6.332796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.332806] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.332816] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    6.332819] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    6.332847] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    6.332866] ehci_hcd 0000:00:1a.0: debug port 2
[    6.336736] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
[    6.336746] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    6.351630] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    6.351755] hub 1-0:1.0: USB hub found
[    6.351758] hub 1-0:1.0: 2 ports detected
[    6.351799] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.351809] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    6.351811] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    6.351837] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    6.351855] ehci_hcd 0000:00:1d.0: debug port 2
[    6.355720] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
[    6.355730] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    6.371597] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    6.371712] hub 2-0:1.0: USB hub found
[    6.371714] hub 2-0:1.0: 2 ports detected
[    6.371752] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.371759] uhci_hcd: USB Universal Host Controller Interface driver
[    6.371788] usbcore: registered new interface driver libusual
[    6.371813] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    6.404345] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    6.404347] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    6.655260] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.655344] mousedev: PS/2 mouse device common for all mice
[    6.655455] rtc_cmos 00:04: RTC can wake from S4
[    6.655554] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    6.655580] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    6.655647] device-mapper: uevent: version 1.0.3
[    6.655700] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    6.655885] cpuidle: using governor ladder
[    6.661923] ata6: SATA link down (SStatus 0 SControl 300)
[    6.662112] cpuidle: using governor menu
[    6.662113] EFI Variables Facility v0.08 2004-May-17
[    6.662243] TCP cubic registered
[    6.662303] NET: Registered protocol family 10
[    6.662566] NET: Registered protocol family 17
[    6.662569] Registering the dns_resolver key type
[    6.662658] PM: Hibernation image not present or could not be loaded.
[    6.662666] registered taskstats version 1
[    6.663166] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    6.667373]   Magic number: 5:76:471
[    6.667464] rtc_cmos 00:04: setting system clock to 2013-03-19 07:28:40 UTC (1363678120)
[    6.668828] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    6.668829] EDD information not available.
[    6.795661] hub 1-1:1.0: USB hub found
[    6.795771] hub 1-1:1.0: 6 ports detected
[    6.814988] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.818960] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    6.821316] ata1.00: ATA-8: WDC WD10EVDS-63U8B0, 01.00A01, max UDMA/133
[    6.821321] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    6.822960] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    6.823119] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
[    6.823172] ata1.00: configured for UDMA/133
[    6.823356] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EVDS-63U 01.0 PQ: 0 ANSI: 5
[    6.823495] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    6.823525] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.823535] sd 0:0:0:0: [sda] Write Protect is off
[    6.823536] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.823557] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.825026] ata2.00: ATA-8: WDC WD10EVDS-63U8B0, 01.00A01, max UDMA/133
[    6.825031] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    6.827803] ata2.00: configured for UDMA/133
[    6.828000] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EVDS-63U 01.0 PQ: 0 ANSI: 5
[    6.828131] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.828184] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    6.828434] sd 1:0:0:0: [sdb] Write Protect is off
[    6.828436] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    6.828560] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.839120] ata5.00: configured for UDMA/100
[    6.839349]  sda: unknown partition table
[    6.839477] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.890376]  sdb: sdb1
[    6.891009] sd 1:0:0:0: [sdb] Attached SCSI disk
[    6.906813] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    7.039456] hub 2-1:1.0: USB hub found
[    7.039534] hub 2-1:1.0: 8 ports detected
[    7.042602] Refined TSC clocksource calibration: 2793.653 MHz.
[    7.042607] Switching to clocksource tsc
[    7.110682] usb 1-1.3: new low-speed USB device number 3 using ehci_hcd
[    7.126660] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.126680] ata3.01: SATA link down (SStatus 0 SControl 300)
[    7.126795] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.126805] ata4.01: SATA link down (SStatus 0 SControl 300)
[    7.127255] ata3.00: ATA-7: INTEL SSDSA2M160G2LE, 2CV102M3, max UDMA/133
[    7.127257] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    7.127501] ata4.00: ATA-7: INTEL SSDSA2M160G2LE, 2CV102M3, max UDMA/133
[    7.127503] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    7.135014] ata3.00: configured for UDMA/133
[    7.135023] ata4.00: configured for UDMA/133
[    7.135162] scsi 2:0:0:0: Direct-Access     ATA      INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
[    7.135305] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    7.135390] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    7.135746] scsi 3:0:0:0: Direct-Access     ATA      INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
[    7.135879] sd 2:0:0:0: [sdc] Write Protect is off
[    7.135882] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    7.135932] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    7.135950] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.135982] sd 3:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    7.136264] sd 3:0:0:0: [sdd] Write Protect is off
[    7.136267] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    7.136300] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.137351]  sdc: sdc1 sdc2 < sdc5 sdc6 >
[    7.137467]  sdd: sdd1 sdd2 < sdd5 sdd6 >
[    7.137734] sd 2:0:0:0: [sdc] Attached SCSI disk
[    7.137883] sd 3:0:0:0: [sdd] Attached SCSI disk
[    7.139178] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS70  EX00 PQ: 0 ANSI: 5
[    7.147775] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.147778] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.147938] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    7.148018] sr 4:0:0:0: Attached scsi generic sg4 type 5
[    7.149115] Freeing unused kernel memory: 920k freed
[    7.149190] Write protecting the kernel read-only data: 12288k
[    7.152446] Freeing unused kernel memory: 1604k freed
[    7.154974] Freeing unused kernel memory: 1196k freed
[    7.165642] udevd[127]: starting version 175
[    7.167950] md: linear personality registered for level -1
[    7.170375] md: multipath personality registered for level -4
[    7.175960] md: raid0 personality registered for level 0
[    7.177492] md: raid1 personality registered for level 1
[    7.178715] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    7.178735] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.178776] r8169 0000:02:00.0: setting latency timer to 64
[    7.178865] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[    7.179251] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000182e000, 90:2b:34:30:02:96, XID 0c900800 IRQ 41
[    7.179255] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    7.179851] async_tx: api initialized (async)
[    7.202103] md: bind<sdc6>
[    7.203487] md: bind<sdd1>
[    7.205039] md: bind<sdc5>
[    7.206543] md: bind<sdd6>
[    7.207789] bio: create slab <bio-1> at 1
[    7.207796] md/raid0:md2: md_size is 547024896 sectors.
[    7.207797] md: RAID0 configuration for md2 - 1 zone
[    7.207798] md: zone0=[sdd6/sdc6]
[    7.207800]       zone-offset=         0KB, device-offset=         0KB, size= 273512448KB
[    7.207801]
[    7.207806] md2: detected capacity change from 0 to 280076746752
[    7.208938] md: bind<sdc1>
[    7.209334]  md2: unknown partition table
[    7.210442] md/raid1:md0: active with 2 out of 2 mirrors
[    7.210455] md0: detected capacity change from 0 to 15998050304
[    7.211793] md: bind<sdd5>
[    7.211989]  md0: unknown partition table
[    7.213451] md/raid0:md1: md_size is 15618048 sectors.
[    7.213453] md: RAID0 configuration for md1 - 1 zone
[    7.213454] md: zone0=[sdd5/sdc5]
[    7.213457]       zone-offset=         0KB, device-offset=         0KB, size=   7809024KB
[    7.213458]
[    7.213462] md1: detected capacity change from 0 to 7996440576
[    7.215350]  md1: unknown partition table
[    7.218604] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
[    7.218670] generic-usb 0003:045E:078C.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1a.0-1.3/input0
[    7.218683] usbcore: registered new interface driver usbhid
[    7.218684] usbhid: USB HID core driver
[    7.230773] md: bind<sdb1>
[    7.241600] md: bind<sda>
[    7.242672] md/raid1:md3: active with 2 out of 2 mirrors
[    7.242687] md3: detected capacity change from 0 to 1000203655168
[    7.243722]  md3: unknown partition table
[    7.246314] raid6: int64x1   1875 MB/s
[    7.290372] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
[    7.314198] raid6: int64x2   4368 MB/s
[    7.382091] raid6: int64x4   3869 MB/s
[    7.395818] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
[    7.396097] generic-usb 0003:045E:0084.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[    7.444313] pata_marvell 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.444340] pata_marvell 0000:01:00.1: setting latency timer to 64
[    7.444575] scsi6 : pata_marvell
[    7.444642] scsi7 : pata_marvell
[    7.444669] ata7: PATA max UDMA/100 cmd 0xda00 ctl 0xd900 bmdma 0xd600 irq 17
[    7.444671] ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd700 bmdma 0xd608 irq 17
[    7.449980] raid6: int64x8   2826 MB/s
[    7.517885] raid6: sse2x1   10134 MB/s
[    7.585783] raid6: sse2x2   12519 MB/s
[    7.653684] raid6: sse2x4   14373 MB/s
[    7.653685] raid6: using algorithm sse2x4 (14373 MB/s)
[    7.765427] xor: automatically using best checksumming function: generic_sse
[    7.781486]    generic_sse: 16833.000 MB/sec
[    7.781488] xor: using function: generic_sse (16833.000 MB/sec)
[    7.782145] md: raid6 personality registered for level 6
[    7.782147] md: raid5 personality registered for level 5
[    7.782148] md: raid4 personality registered for level 4
[    7.785347] md: raid10 personality registered for level 10
[    7.899730] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[    7.899733] PM: Marking nosave pages: 00000000d6f90000 - 0000000100000000
[    7.900022] PM: Basic memory bitmaps created
[    7.938684] PM: Basic memory bitmaps freed
[    7.942311] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[    9.758669] Adding 7809016k swap on /dev/md1.  Priority:-1 extents:1 across:7809016k
[   10.390291] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro,discard
[   10.421166] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: errors=remount-ro,discard
[   10.437437] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   10.437963] SGI XFS Quota Management subsystem
[   10.438494] XFS (md3): Mounting Filesystem
[   10.667804] XFS (md3): Ending clean mount
[   10.764083] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.764477] init: procps (virtual-filesystems) main process (638) terminated with status 255
[   10.773080] udevd[654]: starting version 175
[   10.779652] RPC: Registered named UNIX socket transport module.
[   10.779655] RPC: Registered udp transport module.
[   10.779656] RPC: Registered tcp transport module.
[   10.779658] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.821135] FS-Cache: Loaded
[   10.831932] FS-Cache: Netfs 'nfs' registered for caching
[   10.838573] parport_pc 00:08: reported by Plug and Play ACPI
[   10.838622] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   10.840871] lp: driver loaded but no devices found
[   10.843563] type=1400 audit(1363678124.677:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
[   10.844022] type=1400 audit(1363678124.677:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=802 comm="apparmor_parser"
[   10.844287] type=1400 audit(1363678124.677:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=802 comm="apparmor_parser"
[   10.846281] Bluetooth: Core ver 2.16
[   10.846298] NET: Registered protocol family 31
[   10.846300] Bluetooth: HCI device and connection manager initialized
[   10.846302] Bluetooth: HCI socket layer initialized
[   10.846304] Bluetooth: L2CAP socket layer initialized
[   10.846311] Bluetooth: SCO socket layer initialized
[   10.847505] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   10.859783] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.864703] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.864705] Bluetooth: BNEP filters: protocol multicast
[   10.865872] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   10.866144] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.866150] mei 0000:00:16.0: setting latency timer to 64
[   10.866207] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[   10.871038] init: smbd main process (878) terminated with status 1
[   10.871062] init: smbd main process ended, respawning
[   10.890719] [drm] Initialized drm 1.1.0 20060810
[   10.891129] ppdev: user-space parallel port driver
[   10.900586] Bluetooth: RFCOMM TTY layer initialized
[   10.900591] Bluetooth: RFCOMM socket layer initialized
[   10.900593] Bluetooth: RFCOMM ver 1.11
[   10.928525] init: failsafe main process (971) killed by TERM signal
[   10.928746] init: procps (static-network-up) main process (1066) terminated with status 255
[   10.933039] lp0: using parport0 (interrupt-driven).
[   10.944809] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.944814] i915 0000:00:02.0: setting latency timer to 64
[   10.951052] Loading iSCSI transport class v2.0-870.
[   10.953674] iscsi: registered transport (tcp)
[   10.971455] iscsi: registered transport (iser)
[   10.973716] iscsid (1143): /proc/1143/oom_adj is deprecated, please use /proc/1143/oom_score_adj instead.
[   11.070562] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   11.070568] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.070569] [drm] Driver supports precise vblank timestamp query.
[   11.070600] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.073585] r8169 0000:02:00.0: eth0: link down
[   11.073591] r8169 0000:02:00.0: eth0: link down
[   11.074440] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.074634] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.075375] type=1400 audit(1363678124.909:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1178 comm="apparmor_parser"
[   11.075696] type=1400 audit(1363678124.909:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1178 comm="apparmor_parser"
[   11.094963] type=1400 audit(1363678124.929:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dhcpd" pid=1246 comm="apparmor_parser"
[   11.095175] type=1400 audit(1363678124.929:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1239 comm="apparmor_parser"
[   11.095358] type=1400 audit(1363678124.929:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1240 comm="apparmor_parser"
[   11.095527] type=1400 audit(1363678124.929:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1244 comm="apparmor_parser"
[   11.095724] type=1400 audit(1363678124.929:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1240 comm="apparmor_parser"
[   11.095927] type=1400 audit(1363678124.929:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1244 comm="apparmor_parser"
[   11.095937] type=1400 audit(1363678124.929:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1240 comm="apparmor_parser"
[   11.096171] type=1400 audit(1363678124.929:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1245 comm="apparmor_parser"
[   11.155285] init: isc-dhcp-server pre-start process (1369) terminated with status 127
[   11.155525] init: alsa-restore main process (1371) terminated with status 19
[   11.159713] init: tftpd-hpa main process (1380) terminated with status 127
[   11.159731] init: tftpd-hpa main process ended, respawning
[   11.199618] /dev/vmmon[1457]: Module vmmon: registered with major=10 minor=165
[   11.199623] /dev/vmmon[1457]: Module vmmon: initialized
[   11.205430] [1482]: VMCI: shared components initialized.
[   11.205452] [1482]: VMCI: host components initialized.
[   11.205497] [1482]: VMCI: Module registered (name=vmci,major=10,minor=57).
[   11.205498] [1482]: VMCI: Using host personality
[   11.205500] [1482]: VMCI: Module (name=vmci) is initialized
[   11.217881] Bridge firewalling registered
[   11.264694] netlink: 12 bytes leftover after parsing attributes.
[   11.264697] netlink: 12 bytes leftover after parsing attributes.
[   11.264718] netlink: 12 bytes leftover after parsing attributes.
[   11.489231] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.507782] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   11.522619] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   11.536390] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 213
[   11.536469] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 213
[   11.563348] fbcon: inteldrmfb (fb0) is primary device
[   11.678630] [drm:gen6_fdi_link_train] *ERROR* FDI train 2 fail!
[   11.698736] Ebtables v2.0 registered
[   11.705286] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.773199] /dev/vmnet: open called by PID 1925 (vmnet-netifup)
[   11.773203] /dev/vmnet: hub 1 does not exist, allocating memory.
[   11.773213] /dev/vmnet: port on hub 1 successfully opened
[   11.777912] /dev/vmnet: open called by PID 1936 (vmnet-natd)
[   11.777920] /dev/vmnet: hub 2 does not exist, allocating memory.
[   11.777932] /dev/vmnet: port on hub 2 successfully opened
[   11.777973] netlink: 12 bytes leftover after parsing attributes.
[   11.777975] netlink: 12 bytes leftover after parsing attributes.
[   11.777997] netlink: 12 bytes leftover after parsing attributes.
[   11.778059] netlink: 12 bytes leftover after parsing attributes.
[   11.779673] userif-1: sent link down event.
[   11.779675] userif-1: sent link up event.
[   11.780726] /dev/vmnet: open called by PID 1940 (vmnet-netifup)
[   11.780731] /dev/vmnet: port on hub 2 successfully opened
[   11.798123] /dev/vmnet: open called by PID 1948 (vmnet-dhcpd)
[   11.798130] /dev/vmnet: port on hub 2 successfully opened
[   11.800102] /dev/vmnet: open called by PID 1956 (vmnet-natd)
[   11.800106] /dev/vmnet: hub 8 does not exist, allocating memory.
[   11.800115] /dev/vmnet: port on hub 8 successfully opened
[   11.800149] netlink: 12 bytes leftover after parsing attributes.
[   11.800151] netlink: 12 bytes leftover after parsing attributes.
[   11.800171] netlink: 12 bytes leftover after parsing attributes.
[   11.800219] netlink: 12 bytes leftover after parsing attributes.
[   11.800620] userif-4: sent link down event.
[   11.800621] userif-4: sent link up event.
[   11.801428] /dev/vmnet: open called by PID 1957 (vmnet-netifup)
[   11.801433] /dev/vmnet: port on hub 8 successfully opened
[   11.806717] /dev/vmnet: open called by PID 1964 (vmnet-dhcpd)
[   11.806726] /dev/vmnet: port on hub 8 successfully opened
[   11.971600] Console: switching to colour frame buffer device 128x48
[   11.972733] fb0: inteldrmfb frame buffer device
[   11.972734] drm: registered panic notifier
[   11.972807] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   11.972855] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.972928] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.972954] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   12.034242] PM: Syncing filesystems ... done.
[   12.034969] PM: Preparing system for standby sleep
[   12.034974] Freezing user space processes ... (elapsed 0.49 seconds) done.
[   12.530442] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   12.546457] PM: Entering standby sleep
[   12.546479] Suspending console(s) (use no_console_suspend to debug)
[   12.546702] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
[   12.546752] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[   12.546828] sd 3:0:0:0: [sdd] Stopping disk
[   12.546851] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[   12.546920] sd 2:0:0:0: [sdc] Stopping disk
[   12.546948] parport_pc 00:08: disabled
[   12.546991] sd 1:0:0:0: [sdb] Stopping disk
[   12.547014] serial 00:07: disabled
[   12.547035] serial 00:07: wake-up capability disabled by ACPI
[   12.547055] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   12.547207] sd 0:0:0:0: [sda] Stopping disk
[   12.547685] pata_marvell 0000:01:00.1: PCI INT B disabled
[   12.547698] ata_piix 0000:00:1f.5: PCI INT B disabled
[   12.594371] ehci_hcd 0000:00:1a.0: PCI INT C disabled
[   12.654281] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[   12.654287] PM: suspend of drv:ehci_hcd dev:0000:00:1d.0 complete after 106.795 msecs
[   12.754197] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[   12.770106] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 222.741 msecs
[   12.822217] PM: suspend of drv:sd dev:2:0:0:0 complete after 275.875 msecs
[   12.822325] PM: suspend of drv:scsi dev:target2:0:0 complete after 275.967 msecs
[   12.822353] PM: suspend of drv:scsi dev:host2 complete after 275.285 msecs
[   12.824188] PM: suspend of drv:sd dev:3:0:0:0 complete after 277.898 msecs
[   12.824299] PM: suspend of drv:scsi dev:target3:0:0 complete after 277.990 msecs
[   12.824326] PM: suspend of drv:scsi dev:host3 complete after 277.287 msecs
[   12.824451] ata_piix 0000:00:1f.2: PCI INT B disabled
[   12.838006] PM: suspend of drv:ata_piix dev:0000:00:1f.2 complete after 290.796 msecs
[   13.262897] PM: suspend of drv:sd dev:0:0:0:0 complete after 716.908 msecs
[   13.263015] PM: suspend of drv:scsi dev:target0:0:0 complete after 716.925 msecs
[   13.263058] PM: suspend of drv:scsi dev:host0 complete after 716.619 msecs
[   13.263152] PM: suspend of drv:sd dev:1:0:0:0 complete after 717.371 msecs
[   13.263184] PM: suspend of drv:scsi dev:target1:0:0 complete after 717.289 msecs
[   13.263212] PM: suspend of drv:scsi dev:host1 complete after 716.789 msecs
[   13.277379] PM: suspend of drv:ahci dev:0000:01:00.0 complete after 730.909 msecs
[   13.277463] PM: suspend of drv:pcieport dev:0000:00:1c.0 complete after 730.883 msecs
[   13.277508] PM: suspend of drv: dev:pci0000:00 complete after 730.827 msecs
[   13.277536] PM: suspend of devices complete after 732.042 msecs
[   13.277537] PM: suspend devices took 0.732 seconds
[   13.277695] r8169 0000:02:00.0: PME# enabled
[   13.277699] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[   13.293533] ehci_hcd 0000:00:1d.0: PME# enabled
[   13.293537] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[   13.309341] ehci_hcd 0000:00:1a.0: PME# enabled
[   13.309351] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[   13.341282] PM: late suspend of devices complete after 63.834 msecs
[   13.341814] ACPI: Preparing to enter system sleep state S1
[   13.342802] PM: Saving platform NVS memory
[   13.343463] Disabling non-boot CPUs ...
[   13.445096] CPU 1 is now offline
[   13.548948] CPU 2 is now offline
[   13.652791] CPU 3 is now offline
[   13.756636] CPU 4 is now offline
[   13.860481] CPU 5 is now offline
[   13.964327] CPU 6 is now offline
[   14.068169] CPU 7 is now offline
[   18.335141] PM: Restoring platform NVS memory
[   18.335497] Enabling non-boot CPUs ...
[   18.335552] Booting Node 0 Processor 1 APIC 0x2
[   18.335552] smpboot cpu 1: start_ip = 99000
[   18.346560] Calibrating delay loop (skipped) already calibrated this CPU
[   18.366854] NMI watchdog enabled, takes one hw-pmu counter.
[   18.367072] CPU1 is up
[   18.367322] Booting Node 0 Processor 2 APIC 0x4
[   18.367324] smpboot cpu 2: start_ip = 99000
[   18.378331] Calibrating delay loop (skipped) already calibrated this CPU
[   18.398679] NMI watchdog enabled, takes one hw-pmu counter.
[   18.398951] CPU2 is up
[   18.398991] Booting Node 0 Processor 3 APIC 0x6
[   18.398992] smpboot cpu 3: start_ip = 99000
[   18.410010] Calibrating delay loop (skipped) already calibrated this CPU
[   18.430380] NMI watchdog enabled, takes one hw-pmu counter.
[   18.430683] CPU3 is up
[   18.430730] Booting Node 0 Processor 4 APIC 0x1
[   18.430731] smpboot cpu 4: start_ip = 99000
[   18.441739] Calibrating delay loop (skipped) already calibrated this CPU
[   18.461819] /dev/vmmon[1264]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445380395584512666 new 18445380395580421866 attempts 1
[   18.462161] NMI watchdog enabled, takes one hw-pmu counter.
[   18.462388] CPU4 is up
[   18.462438] Booting Node 0 Processor 5 APIC 0x3
[   18.462439] smpboot cpu 5: start_ip = 99000
[   18.473447] Calibrating delay loop (skipped) already calibrated this CPU
[   18.493959] NMI watchdog enabled, takes one hw-pmu counter.
[   18.494182] CPU5 is up
[   18.494260] Booting Node 0 Processor 6 APIC 0x5
[   18.494260] smpboot cpu 6: start_ip = 99000
[   18.505268] Calibrating delay loop (skipped) already calibrated this CPU
[   18.525970] NMI watchdog enabled, takes one hw-pmu counter.
[   18.526371] CPU6 is up
[   18.526427] Booting Node 0 Processor 7 APIC 0x7
[   18.526428] smpboot cpu 7: start_ip = 99000
[   18.537436] Calibrating delay loop (skipped) already calibrated this CPU
[   18.558074] NMI watchdog enabled, takes one hw-pmu counter.
[   18.558394] CPU7 is up
[   18.565883] ACPI: Waking up from system sleep state S1
[   18.578785] i915 0000:00:02.0: BAR 0: set to [mem 0xfb800000-0xfbbfffff 64bit] (PCI address [0xfb800000-0xfbbfffff])
[   18.578793] i915 0000:00:02.0: BAR 2: set to [mem 0xe0000000-0xefffffff 64bit pref] (PCI address [0xe0000000-0xefffffff])
[   18.578798] i915 0000:00:02.0: BAR 4: set to [io  0xff00-0xff3f] (PCI address [0xff00-0xff3f])
[   18.578815] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900403, writing 0x900407)
[   18.610744] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xfbffe000-0xfbffe3ff] (PCI address [0xfbffe000-0xfbffe3ff])
[   18.610762] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x300, writing 0x305)
[   18.610784] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[   18.610808] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[   18.610813] ehci_hcd 0000:00:1a.0: PME# disabled
[   18.626718] snd_hda_intel 0000:00:1b.0: BAR 0: set to [mem 0xfbff8000-0xfbffbfff 64bit] (PCI address [0xfbff8000-0xfbffbfff])
[   18.626737] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[   18.626754] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x1)
[   18.626760] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[   18.642695] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xfbffd000-0xfbffd3ff] (PCI address [0xfbffd000-0xfbffd3ff])
[   18.642713] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x109)
[   18.642736] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[   18.642759] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[   18.642764] ehci_hcd 0000:00:1d.0: PME# disabled
[   18.674664] ata_piix 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2b00001, writing 0x2b00005)
[   18.690621] ahci 0000:01:00.0: BAR 0: set to [io  0xdf00-0xdf07] (PCI address [0xdf00-0xdf07])
[   18.690629] ahci 0000:01:00.0: BAR 1: set to [io  0xde00-0xde03] (PCI address [0xde00-0xde03])
[   18.690636] ahci 0000:01:00.0: BAR 2: set to [io  0xdd00-0xdd07] (PCI address [0xdd00-0xdd07])
[   18.690643] ahci 0000:01:00.0: BAR 3: set to [io  0xdc00-0xdc03] (PCI address [0xdc00-0xdc03])
[   18.690649] ahci 0000:01:00.0: BAR 4: set to [io  0xdb00-0xdb0f] (PCI address [0xdb00-0xdb0f])
[   18.690656] ahci 0000:01:00.0: BAR 5: set to [mem 0xfbeff000-0xfbeff7ff] (PCI address [0xfbeff000-0xfbeff7ff])
[   18.690720] ahci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100403, writing 0x100407)
[   18.706598] pata_marvell 0000:01:00.1: BAR 0: set to [io  0xda00-0xda07] (PCI address [0xda00-0xda07])
[   18.706606] pata_marvell 0000:01:00.1: BAR 1: set to [io  0xd900-0xd903] (PCI address [0xd900-0xd903])
[   18.706613] pata_marvell 0000:01:00.1: BAR 2: set to [io  0xd800-0xd807] (PCI address [0xd800-0xd807])
[   18.706620] pata_marvell 0000:01:00.1: BAR 3: set to [io  0xd700-0xd703] (PCI address [0xd700-0xd703])
[   18.706626] pata_marvell 0000:01:00.1: BAR 4: set to [io  0xd600-0xd60f] (PCI address [0xd600-0xd60f])
[   18.706634] pata_marvell 0000:01:00.1: BAR 5: set to [mem 0xfbefe000-0xfbefe00f] (PCI address [0xfbefe000-0xfbefe00f])
[   18.706697] pata_marvell 0000:01:00.1: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[   18.722802] PM: early resume of devices complete after 157.083 msecs
[   18.722841] i915 0000:00:02.0: setting latency timer to 64
[   18.722917] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   18.722935] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   18.722939] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   18.722964] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   18.722966] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   18.722971] pci 0000:00:1e.0: setting latency timer to 64
[   18.722974] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   18.722988] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   18.722989] ata_piix 0000:00:1f.2: setting latency timer to 64
[   18.722999] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   18.723006] ata_piix 0000:00:1f.5: setting latency timer to 64
[   18.723020] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[   18.723025] pata_marvell 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   18.723029] ahci 0000:01:00.0: setting latency timer to 64
[   18.723041] r8169 0000:02:00.0: PME# disabled
[   18.723044] pata_marvell 0000:01:00.1: setting latency timer to 64
[   18.723062] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[   18.723067] pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   18.723091] pci 0000:03:00.0: setting latency timer to 64
[   18.723144] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   18.723276] sd 0:0:0:0: [sda] Starting disk
[   18.723294] sd 1:0:0:0: [sdb] Starting disk
[   18.723330] sd 2:0:0:0: [sdc] Starting disk
[   18.723333] sd 3:0:0:0: [sdd] Starting disk
[   18.726805] serial 00:07: activated
[   18.727041] parport_pc 00:08: activated
[   18.835022] r8169 0000:02:00.0: eth0: link down
[   18.847339] PM: resume of drv: dev:ep_00 complete after 123.767 msecs
[   18.847343] PM: resume of drv:usbhid dev:1-1.4:1.0 complete after 123.933 msecs
[   18.847373] PM: resume of drv: dev:ep_81 complete after 123.904 msecs
[   19.052875] ata6: SATA link down (SStatus 0 SControl 300)
[   19.197888] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   19.206022] ata5.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[   19.206024] ata5.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[   19.206025] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[   19.213846] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[   19.213874] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[   19.216369] ata1.00: configured for UDMA/133
[   19.216688] ata2.00: configured for UDMA/133
[   19.221976] ata5.00: configured for UDMA/100
[   19.517430] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   19.517444] ata3.01: SATA link down (SStatus 0 SControl 300)
[   19.517571] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   19.517582] ata4.01: SATA link down (SStatus 0 SControl 300)
[   19.525761] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[   19.525763] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[   19.525765] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[   19.525822] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[   19.525824] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[   19.525826] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[   19.533891] ata3.00: configured for UDMA/133
[   19.533949] ata4.00: configured for UDMA/133
[   19.534304] PM: resume of drv:sd dev:2:0:0:0 complete after 812.183 msecs
[   19.534401] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 812.280 msecs
[   19.534541] PM: resume of drv:sd dev:3:0:0:0 complete after 812.414 msecs
[   19.534632] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 812.493 msecs
[   19.573528] PM: resume of drv:i915 dev:0000:00:02.0 complete after 851.957 msecs
[   23.233352] r8169 0000:02:00.0: eth0: link up
[   23.234025] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.183431] vmnet2: no IPv6 routers present
[   26.247327] vmnet8: no IPv6 routers present
[   26.582835] vmnet1: no IPv6 routers present
[   26.893666] PM: resume of drv:sd dev:1:0:0:0 complete after 8182.535 msecs
[   26.893684] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 8182.550 msecs
[   28.184523] PM: resume of drv:sd dev:0:0:0:0 complete after 9475.332 msecs
[   28.184541] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 9475.348 msecs
[   28.184632] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 9471.514 msecs
[   28.184696] PM: resume of devices complete after 9475.960 msecs
[   28.184743] PM: resume devices took 9.476 seconds
[   28.184762] PM: Finishing wakeup.
[   28.184763] Restarting tasks ... done.
[   28.185311] /dev/vmnet: open called by PID 1562 (vmnet-bridge)
[   28.185320] /dev/vmnet: hub 0 does not exist, allocating memory.
[   28.185341] /dev/vmnet: port on hub 0 successfully opened
[   28.185354] bridge-eth0: up
[   28.185420] bridge-eth0: attached
[   28.249125] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 73
[   28.249150] Raw EDID:
[   28.249158]      00 ff ff ff ff ff ff 00 1e 6d c0 4b 01 01 01 01
[   28.249172]      01 13 01 03 80 29 17 78 ea 66 f5 a4 55 4d 9c 24
[   28.249187]      11 50 54 a5 6a 00 31 4f 45 4f 61 4f 71 40 81 00
[   28.249201]      01 01 01 01 01 01 34 21 50 b0 51 00 1b 30 40 70
[   28.249214]      61 3b 83 44 e7 c2 f3 39 fd 39 08 09 d0 cc 41 09
[   28.249229]      78 08 10 44 42 82 22 42 0a 10 ca 60 81 04 03 21
[   28.249243]      01 c7 7e c0 04 10 ed c2 a2 83 49 40 42 20 82 80
[   28.249257]      a9 ad 03 82 19 22 84 00 97 10 04 4f ff ff ff ff
[   28.385745] userif-1: sent link down event.
[   28.385747] userif-1: sent link up event.
[   28.385795] userif-4: sent link down event.
[   28.385797] userif-4: sent link up event.iSCSI Enterprise Target Software - version 1.4.20.3
[   28.927221] iscsi_trgt: Registered io type fileio
[   28.927223] iscsi_trgt: Registered io type blockio
[   28.927224] iscsi_trgt: Registered io type nullio
[   28.929676] iscsi_trgt: open_path(120) Can't open /storage/iscsi/hyper-v/lun0_40gb -2
[   28.929677] iscsi_trgt: fileio_attach(220) -2
[   28.929868] iscsi_trgt: open_path(120) Can't open /storage/iscsi/hyper-v/lun1_1gb -2
[   28.929869] iscsi_trgt: fileio_attach(220) -2
[   29.175236] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   29.175516] NFSD: starting 90-second grace period
[   29.421472] userif-4: sent link down event.
[   29.421474] userif-4: sent link up event.
[   29.421477] userif-1: sent link down event.
[   29.421480] userif-1: sent link up event.
[   29.459211] IPv6 addrconf: prefix with wrong length 92
[   29.997732] [drm:intel_disable_transcoder] *ERROR* failed to disable transcoder 1
[   31.697557] init: plymouth-stop pre-start process (3124) terminated with status 1
[   36.496333] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[   36.496359] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[   36.499087] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 3 at 0, next 4)
[   44.014554] IPv6 addrconf: prefix with wrong length 92
[   49.776929] IPv6 addrconf: prefix with wrong length 92
[   55.599165] IPv6 addrconf: prefix with wrong length 92