# generated by PrusaSlicer 2.1.0-alpha1+linux64 on 2019-08-11 at 17:37:33
bed_custom_model =
bed_custom_texture =
bed_shape = 0x0,160x0,160x160,0x160
before_layer_gcode =
between_objects_gcode =
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = ""
default_print_profile =
deretract_speed = 0
end_gcode = G91\nG1 E-2 F2700\nG1 E-2 Z0.2 F2400\nG1 X5 Y5 F3000\nG1 Z10\nG90\nM106 S0\nM104 S0\nM140 S0\nM84 X Y E
extra_loading_move = -2
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
host_type = octoprint
inherits =
layer_gcode =
machine_max_acceleration_e = 10000,5000
machine_max_acceleration_extruding = 1500,1250
machine_max_acceleration_retracting = 1500,1250
machine_max_acceleration_x = 9000,1000
machine_max_acceleration_y = 9000,1000
machine_max_acceleration_z = 500,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 500,200
machine_max_feedrate_y = 500,200
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 10,10
machine_max_jerk_y = 10,10
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0
max_print_height = 200
min_layer_height = 0.07
nozzle_diameter = 0.4
parking_pos_retraction = 92
print_host = 192.168.0.33
printer_model =
printer_notes = PRINTER_HAS_BOWDEN
printer_settings_id =
printer_technology = FFF
printer_variant =
printer_vendor =
printhost_apikey =
printhost_cafile =
remaining_times = 0
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 5
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 45
serial_port =
serial_speed = 250000
silent_mode = 1
single_extruder_multi_material = 0
start_gcode = M201 X500.00 Y500.00 Z100.00 E5000.00\nM203 X500.00 Y500.00 Z10.00 E50.00\nM204 P500.00 R1000.00 T500.00\nM205 X8.00 Y8.00 Z0.40 E5.00\nM220 S100\nM221 S100\nG28\nG92 E0\nG1 Z2.0 F3000\nG1 X10.1 Y20 Z0.28 F5000.0\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15\nG1 X10.4 Y200.0 Z0.28 F5000.0\nG1 X10.4 Y20 Z0.28 F1500.0 E30\nG92 E0\nG1 Z2.0 F3000
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0