Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.5.7-gentoo-gentoo-vishera (root@r250r-desktop) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 SMP Fri Nov 23 14:58:58 EST 2012
- [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.5.7-gentoo-vishera root=/dev/sda1 ro quiet splash
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000befe2fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000befe3000-0x00000000bf06bfff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bf06c000-0x00000000bf14cfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bf14d000-0x00000000bf14efff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bf14f000-0x00000000bf156fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000bf157000-0x00000000bf2a9fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bf2aa000-0x00000000bf2aafff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bf2ab000-0x00000000bf2bafff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bf2bb000-0x00000000bf2bbfff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bf2bc000-0x00000000bf2bcfff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bf2bd000-0x00000000bf2c8fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bf2c9000-0x00000000bf2effff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bf2f0000-0x00000000bf4f2fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bf4f3000-0x00000000bf780fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bf781000-0x00000000bfef2fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bfef3000-0x00000000bfefffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.7 present.
- [ 0.000000] DMI: MSI MS-7693/970A-G46 (MS-7693), BIOS V1.11 10/31/2012
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF write-through
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-EBFFF uncachable
- [ 0.000000] EC000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 000000043f000000 aka 17392M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fcee0-0x000fceef] mapped at [ffff8800000fcee0]
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfefffff]
- [ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
- [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
- [ 0.000000] [mem 0xbfe00000-0xbfefffff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0xbfefffff @ [mem 0x1fbfd000-0x1fffffff]
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x43effffff]
- [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
- [ 0.000000] [mem 0x400000000-0x43effffff] page 2M
- [ 0.000000] kernel direct mapping tables up to 0x43effffff @ [mem 0xbfefe000-0xbfefffff]
- [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT 00000000bf14f068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 00000000bf154f50 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
- [ 0.000000] ACPI: DSDT 00000000bf14f140 05E10 (v02 ALASKA A M I 00000000 INTL 20051117)
- [ 0.000000] ACPI: FACS 00000000bf2c3f80 00040
- [ 0.000000] ACPI: APIC 00000000bf155048 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: MCFG 00000000bf1550e8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
- [ 0.000000] ACPI: HPET 00000000bf155128 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
- [ 0.000000] ACPI: SSDT 00000000bf155160 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff]
- [ 0.000000] NODE_DATA [mem 0x43effc000-0x43effffff]
- [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x43effffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0xbefe2fff]
- [ 0.000000] node 0: [mem 0xbf14d000-0xbf14efff]
- [ 0.000000] node 0: [mem 0xbf2aa000-0xbf2aafff]
- [ 0.000000] node 0: [mem 0xbf2bc000-0xbf2bcfff]
- [ 0.000000] node 0: [mem 0xbf4f3000-0xbf780fff]
- [ 0.000000] node 0: [mem 0xbfef3000-0xbfefffff]
- [ 0.000000] node 0: [mem 0x100001000-0x43effffff]
- [ 0.000000] On node 0 totalpages: 4186638
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 6 pages reserved
- [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 16320 pages used for memmap
- [ 0.000000] DMA32 zone: 762562 pages, LIFO batch:31
- [ 0.000000] Normal zone: 53184 pages used for memmap
- [ 0.000000] Normal zone: 3350591 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
- [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
- [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 72
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000befe3000 - 00000000bf06c000
- [ 0.000000] PM: Registered nosave memory: 00000000bf06c000 - 00000000bf14d000
- [ 0.000000] PM: Registered nosave memory: 00000000bf14f000 - 00000000bf157000
- [ 0.000000] PM: Registered nosave memory: 00000000bf157000 - 00000000bf2aa000
- [ 0.000000] PM: Registered nosave memory: 00000000bf2ab000 - 00000000bf2bb000
- [ 0.000000] PM: Registered nosave memory: 00000000bf2bb000 - 00000000bf2bc000
- [ 0.000000] PM: Registered nosave memory: 00000000bf2bd000 - 00000000bf2c9000
- [ 0.000000] PM: Registered nosave memory: 00000000bf2c9000 - 00000000bf2f0000
- [ 0.000000] PM: Registered nosave memory: 00000000bf2f0000 - 00000000bf4f3000
- [ 0.000000] PM: Registered nosave memory: 00000000bf781000 - 00000000bfef3000
- [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f8000000
- [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
- [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
- [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
- [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
- [ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
- [ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
- [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
- [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
- [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
- [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
- [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
- [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
- [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
- [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
- [ 0.000000] e820: [mem 0xbff00000-0xf7ffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88043ec00000 s77568 r8192 d20736 u262144
- [ 0.000000] pcpu-alloc: s77568 r8192 d20736 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4117064
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.5.7-gentoo-vishera root=/dev/sda1 ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ f8000000 size 64 MB
- [ 0.000000] Memory: 16402676k/17809408k available (8122k kernel code, 1062856k absent, 343876k reserved, 4911k data, 596k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:1288 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.001000] Detected 3500.098 MHz processor.
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.19 BogoMIPS (lpj=3500098)
- [ 0.000005] pid_max: default: 32768 minimum: 301
- [ 0.000021] Security Framework initialized
- [ 0.000023] SELinux: Initializing.
- [ 0.000028] SELinux: Starting in permissive mode
- [ 0.000859] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.004570] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.006256] Mount-cache hash table entries: 256
- [ 0.006393] Initializing cgroup subsys cpuacct
- [ 0.006395] Initializing cgroup subsys freezer
- [ 0.006410] tseg: 00bff00000
- [ 0.006411] CPU: Physical Processor ID: 0
- [ 0.006412] CPU: Processor Core ID: 0
- [ 0.006413] mce: CPU supports 7 MCE banks
- [ 0.006418] LVT offset 1 assigned for vector 0xf9
- [ 0.006466] ACPI: Core revision 20120320
- [ 0.023054] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.033037] CPU0: AMD FX(tm)-8320 Eight-Core Processor stepping 00
- [ 0.134634] Performance Events: AMD Family 15h PMU driver.
- [ 0.134637] ... version: 0
- [ 0.134638] ... bit width: 48
- [ 0.134639] ... generic registers: 6
- [ 0.134640] ... value mask: 0000ffffffffffff
- [ 0.134640] ... max period: 00007fffffffffff
- [ 0.134641] ... fixed-purpose events: 0
- [ 0.134642] ... event mask: 000000000000003f
- [ 0.134726] MCE: In-kernel MCE decoding enabled.
- [ 0.134795] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
- [ 0.227075] Brought up 8 CPUs
- [ 0.227078] Total of 8 processors activated (56001.56 BogoMIPS).
- [ 0.237030] devtmpfs: initialized
- [ 0.237168] PM: Registering ACPI NVS region [mem 0xbefe3000-0xbf06bfff] (561152 bytes)
- [ 0.237177] PM: Registering ACPI NVS region [mem 0xbf2bb000-0xbf2bbfff] (4096 bytes)
- [ 0.237178] PM: Registering ACPI NVS region [mem 0xbf2bd000-0xbf2c8fff] (49152 bytes)
- [ 0.237180] PM: Registering ACPI NVS region [mem 0xbf2f0000-0xbf4f2fff] (2109440 bytes)
- [ 0.237236] RTC time: 15:59:54, date: 11/24/12
- [ 0.237265] NET: Registered protocol family 16
- [ 0.237369] kworker/u:0 (33) used greatest stack depth: 6552 bytes left
- [ 0.237653] kworker/u:0 (43) used greatest stack depth: 6224 bytes left
- [ 0.237733] ACPI: bus type pci registered
- [ 0.237805] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.237807] PCI: not using MMCONFIG
- [ 0.237808] PCI: Using configuration type 1 for base access
- [ 0.237809] PCI: Using configuration type 1 for extended access
- [ 0.238119] kworker/u:0 (53) used greatest stack depth: 5472 bytes left
- [ 0.243809] kworker/u:0 (257) used greatest stack depth: 5448 bytes left
- [ 0.246156] bio: create slab <bio-0> at 0
- [ 0.246271] ACPI: Added _OSI(Module Device)
- [ 0.246272] ACPI: Added _OSI(Processor Device)
- [ 0.246273] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.246274] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.246795] ACPI: EC: Look up EC in DSDT
- [ 0.247391] ACPI: Executed 2 blocks of module-level executable AML code
- [ 0.254664] ACPI: Interpreter enabled
- [ 0.254666] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.254681] ACPI: Using IOAPIC for interrupt routing
- [ 0.254784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.254812] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.283635] ACPI: No dock devices found.
- [ 0.283637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.283756] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.283914] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
- [ 0.283916] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
- [ 0.283918] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
- [ 0.283919] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- [ 0.283921] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.283922] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
- [ 0.283923] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
- [ 0.283962] PCI host bridge to bus 0000:00
- [ 0.283964] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
- [ 0.283966] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
- [ 0.283967] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
- [ 0.283969] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.283970] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.283971] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
- [ 0.283973] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
- [ 0.283983] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
- [ 0.284037] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
- [ 0.284067] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.284081] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
- [ 0.284110] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
- [ 0.284134] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
- [ 0.284148] pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]
- [ 0.284156] pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]
- [ 0.284163] pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]
- [ 0.284169] pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]
- [ 0.284176] pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]
- [ 0.284183] pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff]
- [ 0.284226] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
- [ 0.284236] pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff]
- [ 0.284287] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
- [ 0.284301] pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff]
- [ 0.284363] pci 0000:00:12.2: supports D1 D2
- [ 0.284364] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.284381] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
- [ 0.284390] pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff]
- [ 0.284442] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
- [ 0.284456] pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff]
- [ 0.284515] pci 0000:00:13.2: supports D1 D2
- [ 0.284516] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.284533] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
- [ 0.284589] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
- [ 0.284604] pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
- [ 0.284652] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.284663] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
- [ 0.284718] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
- [ 0.284750] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
- [ 0.284759] pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff]
- [ 0.284811] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
- [ 0.284864] pci 0000:00:15.0: supports D1 D2
- [ 0.284884] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
- [ 0.284893] pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff]
- [ 0.284945] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
- [ 0.284958] pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff]
- [ 0.285018] pci 0000:00:16.2: supports D1 D2
- [ 0.285019] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.285035] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
- [ 0.285050] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
- [ 0.285062] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
- [ 0.285075] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
- [ 0.285090] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
- [ 0.285102] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
- [ 0.285145] pci 0000:01:00.0: [1002:9490] type 00 class 0x030000
- [ 0.285156] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.285164] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea2ffff 64bit]
- [ 0.285170] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
- [ 0.285181] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
- [ 0.285207] pci 0000:01:00.0: supports D1 D2
- [ 0.285222] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
- [ 0.285233] pci 0000:01:00.1: reg 10: [mem 0xfea30000-0xfea33fff 64bit]
- [ 0.285286] pci 0000:01:00.1: supports D1 D2
- [ 0.286335] pci 0000:00:02.0: PCI bridge to [bus 01-01]
- [ 0.286339] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- [ 0.286341] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.286344] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.286379] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
- [ 0.286395] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
- [ 0.286476] pci 0000:02:00.0: PME# supported from D3hot
- [ 0.288331] pci 0000:00:04.0: PCI bridge to [bus 02-02]
- [ 0.288335] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.288384] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
- [ 0.288390] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
- [ 0.288391] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
- [ 0.288393] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
- [ 0.288394] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.288395] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.288397] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
- [ 0.288398] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
- [ 0.288448] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.288463] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
- [ 0.288488] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- [ 0.288504] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
- [ 0.288571] pci 0000:04:00.0: supports D1 D2
- [ 0.288572] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.290330] pci 0000:00:15.0: PCI bridge to [bus 04-04]
- [ 0.290335] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
- [ 0.290340] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.290353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.290431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
- [ 0.290471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
- [ 0.290495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
- [ 0.290521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
- [ 0.290551] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.290552] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 0.290553] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.295131] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
- [ 0.295175] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
- [ 0.295219] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
- [ 0.295262] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
- [ 0.295296] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
- [ 0.295324] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
- [ 0.295349] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
- [ 0.295375] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
- [ 0.295495] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.295497] vgaarb: loaded
- [ 0.295498] vgaarb: bridge control possible 0000:01:00.0
- [ 0.295608] SCSI subsystem initialized
- [ 0.295713] libata version 3.00 loaded.
- [ 0.295825] ACPI: bus type usb registered
- [ 0.295882] usbcore: registered new interface driver usbfs
- [ 0.295914] usbcore: registered new interface driver hub
- [ 0.295958] usbcore: registered new device driver usb
- [ 0.296177] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.296178] PCI: Using ACPI for IRQ routing
- [ 0.302356] PCI: pci_cache_line_size set to 64 bytes
- [ 0.302414] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.302415] e820: reserve RAM buffer [mem 0xbefe3000-0xbfffffff]
- [ 0.302418] e820: reserve RAM buffer [mem 0xbf14f000-0xbfffffff]
- [ 0.302420] e820: reserve RAM buffer [mem 0xbf2ab000-0xbfffffff]
- [ 0.302421] e820: reserve RAM buffer [mem 0xbf2bd000-0xbfffffff]
- [ 0.302423] e820: reserve RAM buffer [mem 0xbf781000-0xbfffffff]
- [ 0.302424] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
- [ 0.302425] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
- [ 0.302676] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.302748] NetLabel: Initializing
- [ 0.302749] NetLabel: domain hash size = 128
- [ 0.302750] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.302769] NetLabel: unlabeled traffic allowed by default
- [ 0.302866] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.302869] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.304901] Switching to clocksource hpet
- [ 0.312622] pnp: PnP ACPI init
- [ 0.312627] ACPI: bus type pnp registered
- [ 0.312738] pnp 00:00: [bus 00-ff]
- [ 0.312741] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.312742] pnp 00:00: [io 0x0000-0x03af window]
- [ 0.312744] pnp 00:00: [io 0x03e0-0x0cf7 window]
- [ 0.312745] pnp 00:00: [io 0x03b0-0x03df window]
- [ 0.312747] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.312748] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.312750] pnp 00:00: [mem 0x000c0000-0x000dffff window]
- [ 0.312751] pnp 00:00: [mem 0xc0000000-0xffffffff window]
- [ 0.312752] pnp 00:00: [mem 0x00000000 window]
- [ 0.312809] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.312834] pnp 00:01: [mem 0xe0000000-0xefffffff]
- [ 0.312892] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.312894] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.313195] pnp 00:02: [io 0x040b]
- [ 0.313197] pnp 00:02: [io 0x04d6]
- [ 0.313198] pnp 00:02: [io 0x0c00-0x0c01]
- [ 0.313199] pnp 00:02: [io 0x0c14]
- [ 0.313201] pnp 00:02: [io 0x0c50-0x0c51]
- [ 0.313202] pnp 00:02: [io 0x0c52]
- [ 0.313203] pnp 00:02: [io 0x0c6c]
- [ 0.313204] pnp 00:02: [io 0x0c6f]
- [ 0.313205] pnp 00:02: [io 0x0cd0-0x0cd1]
- [ 0.313206] pnp 00:02: [io 0x0cd2-0x0cd3]
- [ 0.313207] pnp 00:02: [io 0x0cd4-0x0cd5]
- [ 0.313208] pnp 00:02: [io 0x0cd6-0x0cd7]
- [ 0.313209] pnp 00:02: [io 0x0cd8-0x0cdf]
- [ 0.313210] pnp 00:02: [io 0x0800-0x089f]
- [ 0.313212] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.313213] pnp 00:02: [io 0x0000-0x000f]
- [ 0.313214] pnp 00:02: [io 0x0b20-0x0b3f]
- [ 0.313215] pnp 00:02: [io 0x0900-0x090f]
- [ 0.313216] pnp 00:02: [io 0x0910-0x091f]
- [ 0.313219] pnp 00:02: [io 0xfe00-0xfefe]
- [ 0.313220] pnp 00:02: [io 0x0060-0x005f disabled]
- [ 0.313221] pnp 00:02: [io 0x0064-0x0063 disabled]
- [ 0.313222] pnp 00:02: [io 0x0485-0x0486]
- [ 0.313224] pnp 00:02: [mem 0xfec00000-0xfec00fff]
- [ 0.313225] pnp 00:02: [mem 0xfee00000-0xfee00fff]
- [ 0.313226] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
- [ 0.313227] pnp 00:02: [mem 0xfed61000-0xfed70fff]
- [ 0.313228] pnp 00:02: [mem 0xfec10000-0xfec10fff]
- [ 0.313229] pnp 00:02: [mem 0xfed00000-0xfed00fff]
- [ 0.313230] pnp 00:02: [mem 0xff800000-0xffffffff]
- [ 0.313306] system 00:02: [io 0x040b] has been reserved
- [ 0.313308] system 00:02: [io 0x04d6] has been reserved
- [ 0.313310] system 00:02: [io 0x0c00-0x0c01] has been reserved
- [ 0.313311] system 00:02: [io 0x0c14] has been reserved
- [ 0.313313] system 00:02: [io 0x0c50-0x0c51] has been reserved
- [ 0.313314] system 00:02: [io 0x0c52] has been reserved
- [ 0.313315] system 00:02: [io 0x0c6c] has been reserved
- [ 0.313317] system 00:02: [io 0x0c6f] has been reserved
- [ 0.313318] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.313319] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.313321] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
- [ 0.313322] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
- [ 0.313323] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
- [ 0.313324] system 00:02: [io 0x0800-0x089f] has been reserved
- [ 0.313326] system 00:02: [io 0x0b20-0x0b3f] has been reserved
- [ 0.313327] system 00:02: [io 0x0900-0x090f] has been reserved
- [ 0.313328] system 00:02: [io 0x0910-0x091f] has been reserved
- [ 0.313330] system 00:02: [io 0xfe00-0xfefe] has been reserved
- [ 0.313331] system 00:02: [io 0x0485-0x0486] has been reserved
- [ 0.313333] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.313335] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.313337] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
- [ 0.313339] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
- [ 0.313340] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
- [ 0.313342] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
- [ 0.313344] system 00:02: [mem 0xff800000-0xffffffff] has been reserved
- [ 0.313345] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.313447] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.313448] pnp 00:03: [io 0x0a00-0x0a0f]
- [ 0.313450] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.313451] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.313507] system 00:03: [io 0x0a00-0x0a0f] has been reserved
- [ 0.313509] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.313537] pnp 00:04: [dma 4]
- [ 0.313539] pnp 00:04: [io 0x0000-0x000f]
- [ 0.313540] pnp 00:04: [io 0x0081-0x0083]
- [ 0.313541] pnp 00:04: [io 0x0087]
- [ 0.313542] pnp 00:04: [io 0x0089-0x008b]
- [ 0.313543] pnp 00:04: [io 0x008f]
- [ 0.313545] pnp 00:04: [io 0x00c0-0x00df]
- [ 0.313588] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.313595] pnp 00:05: [io 0x0070-0x0071]
- [ 0.313601] pnp 00:05: [irq 8]
- [ 0.313646] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.313652] pnp 00:06: [io 0x0061]
- [ 0.313696] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.313712] pnp 00:07: [io 0x0010-0x001f]
- [ 0.313714] pnp 00:07: [io 0x0022-0x003f]
- [ 0.313715] pnp 00:07: [io 0x0044-0x005f]
- [ 0.313716] pnp 00:07: [io 0x0062-0x0063]
- [ 0.313717] pnp 00:07: [io 0x0065-0x006f]
- [ 0.313718] pnp 00:07: [io 0x0072-0x007f]
- [ 0.313719] pnp 00:07: [io 0x0080]
- [ 0.313720] pnp 00:07: [io 0x0084-0x0086]
- [ 0.313721] pnp 00:07: [io 0x0088]
- [ 0.313722] pnp 00:07: [io 0x008c-0x008e]
- [ 0.313723] pnp 00:07: [io 0x0090-0x009f]
- [ 0.313724] pnp 00:07: [io 0x00a2-0x00bf]
- [ 0.313725] pnp 00:07: [io 0x00e0-0x00ef]
- [ 0.313726] pnp 00:07: [io 0x04d0-0x04d1]
- [ 0.313787] system 00:07: [io 0x04d0-0x04d1] has been reserved
- [ 0.313789] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.313795] pnp 00:08: [io 0x00f0-0x00ff]
- [ 0.313798] pnp 00:08: [irq 13]
- [ 0.313844] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.313907] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.313922] pnp 00:0a: [io 0x0060]
- [ 0.313925] pnp 00:0a: [io 0x0064]
- [ 0.313942] pnp 00:0a: [irq 1]
- [ 0.313991] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.314072] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.314133] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.314199] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.314201] pnp 00:0c: [mem 0xfec20000-0xfec200ff]
- [ 0.314265] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
- [ 0.314268] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.314355] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
- [ 0.314407] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.314410] pnp: PnP ACPI: found 14 devices
- [ 0.314411] ACPI: ACPI bus type pnp unregistered
- [ 0.319057] pci 0000:00:02.0: PCI bridge to [bus 01-01]
- [ 0.319059] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- [ 0.319062] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.319064] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.319067] pci 0000:00:04.0: PCI bridge to [bus 02-02]
- [ 0.319069] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.319073] pci 0000:00:14.4: PCI bridge to [bus 03-03]
- [ 0.319081] pci 0000:00:15.0: PCI bridge to [bus 04-04]
- [ 0.319083] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
- [ 0.319087] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.319110] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
- [ 0.319112] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
- [ 0.319114] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
- [ 0.319115] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
- [ 0.319117] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
- [ 0.319118] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
- [ 0.319119] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
- [ 0.319121] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.319122] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
- [ 0.319123] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.319125] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
- [ 0.319126] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
- [ 0.319128] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
- [ 0.319129] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
- [ 0.319130] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
- [ 0.319132] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
- [ 0.319133] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
- [ 0.319134] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
- [ 0.319136] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
- [ 0.319137] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.319155] NET: Registered protocol family 2
- [ 0.319394] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.320523] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.322132] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.322327] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.322328] TCP: reno registered
- [ 0.322344] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.322408] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.322497] NET: Registered protocol family 1
- [ 0.322584] RPC: Registered named UNIX socket transport module.
- [ 0.322585] RPC: Registered udp transport module.
- [ 0.322586] RPC: Registered tcp transport module.
- [ 0.322586] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.610444] pci 0000:01:00.0: Boot video device
- [ 0.610485] PCI: CLS 64 bytes, default 64
- [ 0.610816] PCI-DMA: Disabling AGP.
- [ 0.610880] PCI-DMA: aperture base @ f8000000 size 65536 KB
- [ 0.610882] init_memory_mapping: [mem 0xf8000000-0xfbffffff]
- [ 0.610884] [mem 0xf8000000-0xfbffffff] page 2M
- [ 0.610888] PCI-DMA: using GART IOMMU.
- [ 0.610890] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- [ 0.615359] LVT offset 0 assigned for vector 0x400
- [ 0.615382] perf: AMD IBS detected (0x000000ff)
- [ 0.616257] microcode: CPU0: patch_level=0x0600081c
- [ 0.616263] microcode: CPU1: patch_level=0x0600081c
- [ 0.616269] microcode: CPU2: patch_level=0x0600081c
- [ 0.616276] microcode: CPU3: patch_level=0x0600081c
- [ 0.616282] microcode: CPU4: patch_level=0x0600081c
- [ 0.616287] microcode: CPU5: patch_level=0x0600081c
- [ 0.616290] microcode: CPU6: patch_level=0x0600081c
- [ 0.616296] microcode: CPU7: patch_level=0x0600081c
- [ 0.616343] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.616576] audit: initializing netlink socket (disabled)
- [ 0.616591] type=2000 audit(1353772794.486:1): initialized
- [ 0.630925] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.633820] VFS: Disk quotas dquot_6.5.2
- [ 0.633878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.634611] NFS: Registering the id_resolver key type
- [ 0.634618] Key type id_resolver registered
- [ 0.634619] Key type id_legacy registered
- [ 0.634977] JFS: nTxBlock = 8192, nTxLock = 65536
- [ 0.636142] SGI XFS with security attributes, large block/inode numbers, no debug enabled
- [ 0.636655] msgmni has been set to 32165
- [ 0.636726] SELinux: Registering netfilter hooks
- [ 0.637110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.637111] io scheduler noop registered
- [ 0.637112] io scheduler deadline registered
- [ 0.637160] io scheduler cfq registered (default)
- [ 0.637378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.637433] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.638048] Non-volatile memory driver v1.3
- [ 0.638050] Linux agpgart interface v0.103
- [ 0.638261] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.638264] ACPI: Power Button [PWRB]
- [ 0.638327] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.638329] ACPI: Power Button [PWRF]
- [ 0.638481] ACPI: acpi_idle registered with cpuidle
- [ 0.696599] [drm] Initialized drm 1.1.0 20060810
- [ 0.696602] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
- [ 0.698334] brd: module loaded
- [ 0.699210] loop: module loaded
- [ 0.699420] ahci 0000:00:11.0: version 3.0
- [ 0.699523] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- [ 0.699525] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- [ 0.700442] scsi0 : ahci
- [ 0.700562] scsi1 : ahci
- [ 0.700660] scsi2 : ahci
- [ 0.700761] scsi3 : ahci
- [ 0.700863] scsi4 : ahci
- [ 0.700964] scsi5 : ahci
- [ 0.701252] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
- [ 0.701254] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
- [ 0.701256] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
- [ 0.701258] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
- [ 0.701260] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
- [ 0.701262] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
- [ 0.701637] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 0.701639] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 0.701678] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 0.701679] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 0.701718] sky2: driver version 1.30
- [ 0.701841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.701945] r8169 0000:04:00.0: irq 72 for MSI/MSI-X
- [ 0.702120] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xffffc90012b8c000, d4:3d:7e:2d:25:05, XID 0c900800 IRQ 72
- [ 0.702122] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 0.702320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.702322] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 0.702338] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 0.702399] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 0.702404] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
- [ 0.702407] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
- [ 0.702410] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 0.702424] QUIRK: Enable AMD PLL fix
- [ 0.702431] ehci_hcd 0000:00:12.2: debug port 1
- [ 0.702435] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.702440] ehci_hcd 0000:00:12.2: MWI active
- [ 0.702442] ehci_hcd 0000:00:12.2: supports USB remote wakeup
- [ 0.702451] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000
- [ 0.702455] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.708204] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 0.708223] usb usb1: default language 0x0409
- [ 0.708228] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.708229] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.708231] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.708232] usb usb1: Product: EHCI Host Controller
- [ 0.708233] usb usb1: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ehci_hcd
- [ 0.708234] usb usb1: SerialNumber: 0000:00:12.2
- [ 0.708316] usb usb1: usb_probe_device
- [ 0.708318] usb usb1: configuration #1 chosen from 1 choice
- [ 0.708322] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.708363] hub 1-0:1.0: usb_probe_interface
- [ 0.708365] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.708366] hub 1-0:1.0: USB hub found
- [ 0.708369] hub 1-0:1.0: 5 ports detected
- [ 0.708370] hub 1-0:1.0: standalone hub
- [ 0.708371] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.708372] hub 1-0:1.0: individual port over-current protection
- [ 0.708373] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.708376] hub 1-0:1.0: local power source is good
- [ 0.708377] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.708426] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 0.708481] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 0.708486] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
- [ 0.708488] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
- [ 0.708491] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 0.708504] ehci_hcd 0000:00:13.2: debug port 1
- [ 0.708507] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.708513] ehci_hcd 0000:00:13.2: MWI active
- [ 0.708514] ehci_hcd 0000:00:13.2: supports USB remote wakeup
- [ 0.708517] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
- [ 0.708521] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.714191] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 0.714203] usb usb2: default language 0x0409
- [ 0.714207] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.714209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.714210] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.714212] usb usb2: Product: EHCI Host Controller
- [ 0.714213] usb usb2: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ehci_hcd
- [ 0.714214] usb usb2: SerialNumber: 0000:00:13.2
- [ 0.714299] usb usb2: usb_probe_device
- [ 0.714301] usb usb2: configuration #1 chosen from 1 choice
- [ 0.714306] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.714346] hub 2-0:1.0: usb_probe_interface
- [ 0.714347] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.714348] hub 2-0:1.0: USB hub found
- [ 0.714351] hub 2-0:1.0: 5 ports detected
- [ 0.714352] hub 2-0:1.0: standalone hub
- [ 0.714353] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.714354] hub 2-0:1.0: individual port over-current protection
- [ 0.714355] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.714357] hub 2-0:1.0: local power source is good
- [ 0.714358] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.714407] ehci_hcd 0000:00:16.2: EHCI Host Controller
- [ 0.714461] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
- [ 0.714465] ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4
- [ 0.714467] ehci_hcd 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
- [ 0.714470] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 0.714483] ehci_hcd 0000:00:16.2: debug port 1
- [ 0.714486] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.714492] ehci_hcd 0000:00:16.2: MWI active
- [ 0.714493] ehci_hcd 0000:00:16.2: supports USB remote wakeup
- [ 0.714497] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
- [ 0.714500] ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.720180] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 0.720192] usb usb3: default language 0x0409
- [ 0.720196] usb usb3: udev 1, busnum 3, minor = 256
- [ 0.720197] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.720199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.720200] usb usb3: Product: EHCI Host Controller
- [ 0.720201] usb usb3: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ehci_hcd
- [ 0.720202] usb usb3: SerialNumber: 0000:00:16.2
- [ 0.720284] usb usb3: usb_probe_device
- [ 0.720286] usb usb3: configuration #1 chosen from 1 choice
- [ 0.720289] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 0.720329] hub 3-0:1.0: usb_probe_interface
- [ 0.720330] hub 3-0:1.0: usb_probe_interface - got id
- [ 0.720331] hub 3-0:1.0: USB hub found
- [ 0.720334] hub 3-0:1.0: 4 ports detected
- [ 0.720335] hub 3-0:1.0: standalone hub
- [ 0.720336] hub 3-0:1.0: no power switching (usb 1.0)
- [ 0.720337] hub 3-0:1.0: individual port over-current protection
- [ 0.720338] hub 3-0:1.0: power on to power good time: 20ms
- [ 0.720340] hub 3-0:1.0: local power source is good
- [ 0.720341] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 0.720408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.720409] ohci_hcd: block sizes: ed 80 td 96
- [ 0.720426] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 0.720480] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
- [ 0.720483] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk
- [ 0.720498] ohci_hcd 0000:00:12.0: created debug files
- [ 0.720499] ohci_hcd 0000:00:12.0: supports USB remote wakeup
- [ 0.720507] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
- [ 0.775087] ohci_hcd 0000:00:12.0: OHCI controller state
- [ 0.775090] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 0.775092] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 0.775095] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
- [ 0.775097] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
- [ 0.775100] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.775107] ohci_hcd 0000:00:12.0: hcca frame #0005
- [ 0.775110] ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
- [ 0.775112] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.775114] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
- [ 0.775117] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.775119] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.775122] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.775124] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.775127] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS
- [ 0.775132] usb usb4: default language 0x0409
- [ 0.775136] usb usb4: udev 1, busnum 4, minor = 384
- [ 0.775138] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.775139] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.775140] usb usb4: Product: OHCI Host Controller
- [ 0.775141] usb usb4: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ohci_hcd
- [ 0.775143] usb usb4: SerialNumber: 0000:00:12.0
- [ 0.775233] usb usb4: usb_probe_device
- [ 0.775235] usb usb4: configuration #1 chosen from 1 choice
- [ 0.775238] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 0.775280] hub 4-0:1.0: usb_probe_interface
- [ 0.775281] hub 4-0:1.0: usb_probe_interface - got id
- [ 0.775283] hub 4-0:1.0: USB hub found
- [ 0.775287] hub 4-0:1.0: 5 ports detected
- [ 0.775288] hub 4-0:1.0: standalone hub
- [ 0.775289] hub 4-0:1.0: no power switching (usb 1.0)
- [ 0.775290] hub 4-0:1.0: no over-current protection
- [ 0.775291] hub 4-0:1.0: power on to power good time: 4ms
- [ 0.775294] hub 4-0:1.0: local power source is good
- [ 0.775295] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 0.775313] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
- [ 0.775335] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 0.775389] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 0.775393] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk
- [ 0.775402] ohci_hcd 0000:00:13.0: created debug files
- [ 0.775403] ohci_hcd 0000:00:13.0: supports USB remote wakeup
- [ 0.775407] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
- [ 0.808013] ehci_hcd 0000:00:12.2: GetStatus port:3 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 0.808016] hub 1-0:1.0: port 3: status 0501 change 0001
- [ 0.808021] ehci_hcd 0000:00:12.2: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.808023] hub 1-0:1.0: port 4: status 0501 change 0001
- [ 0.808028] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.808030] hub 1-0:1.0: port 5: status 0501 change 0001
- [ 0.814010] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 0.819997] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
- [ 0.829973] ohci_hcd 0000:00:13.0: OHCI controller state
- [ 0.829976] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 0.829979] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 0.829981] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
- [ 0.829984] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
- [ 0.829986] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.829993] ohci_hcd 0000:00:13.0: hcca frame #0005
- [ 0.829996] ohci_hcd 0000:00:13.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
- [ 0.829998] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.830001] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
- [ 0.830003] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.830006] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.830008] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.830010] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.830013] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
- [ 0.830018] usb usb5: default language 0x0409
- [ 0.830022] usb usb5: udev 1, busnum 5, minor = 512
- [ 0.830023] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.830025] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.830026] usb usb5: Product: OHCI Host Controller
- [ 0.830027] usb usb5: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ohci_hcd
- [ 0.830028] usb usb5: SerialNumber: 0000:00:13.0
- [ 0.830119] usb usb5: usb_probe_device
- [ 0.830121] usb usb5: configuration #1 chosen from 1 choice
- [ 0.830124] usb usb5: adding 5-0:1.0 (config #1, interface 0)
- [ 0.830166] hub 5-0:1.0: usb_probe_interface
- [ 0.830167] hub 5-0:1.0: usb_probe_interface - got id
- [ 0.830168] hub 5-0:1.0: USB hub found
- [ 0.830172] hub 5-0:1.0: 5 ports detected
- [ 0.830173] hub 5-0:1.0: standalone hub
- [ 0.830174] hub 5-0:1.0: no power switching (usb 1.0)
- [ 0.830175] hub 5-0:1.0: no over-current protection
- [ 0.830176] hub 5-0:1.0: power on to power good time: 4ms
- [ 0.830180] hub 5-0:1.0: local power source is good
- [ 0.830181] hub 5-0:1.0: trying to enable port power on non-switchable hub
- [ 0.830199] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
- [ 0.830221] ohci_hcd 0000:00:14.5: OHCI Host Controller
- [ 0.830279] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
- [ 0.830283] ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk
- [ 0.830292] ohci_hcd 0000:00:14.5: created debug files
- [ 0.830293] ohci_hcd 0000:00:14.5: supports USB remote wakeup
- [ 0.830296] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
- [ 0.874901] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 0.884869] ohci_hcd 0000:00:14.5: OHCI controller state
- [ 0.884872] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running
- [ 0.884875] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3
- [ 0.884877] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
- [ 0.884880] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
- [ 0.884882] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.884890] ohci_hcd 0000:00:14.5: hcca frame #0005
- [ 0.884892] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
- [ 0.884894] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.884897] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
- [ 0.884899] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
- [ 0.884902] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
- [ 0.884907] usb usb6: default language 0x0409
- [ 0.884911] usb usb6: udev 1, busnum 6, minor = 640
- [ 0.884913] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.884914] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.884915] usb usb6: Product: OHCI Host Controller
- [ 0.884917] usb usb6: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ohci_hcd
- [ 0.884918] usb usb6: SerialNumber: 0000:00:14.5
- [ 0.885009] usb usb6: usb_probe_device
- [ 0.885010] usb usb6: configuration #1 chosen from 1 choice
- [ 0.885014] usb usb6: adding 6-0:1.0 (config #1, interface 0)
- [ 0.885054] hub 6-0:1.0: usb_probe_interface
- [ 0.885055] hub 6-0:1.0: usb_probe_interface - got id
- [ 0.885056] hub 6-0:1.0: USB hub found
- [ 0.885060] hub 6-0:1.0: 2 ports detected
- [ 0.885061] hub 6-0:1.0: standalone hub
- [ 0.885062] hub 6-0:1.0: no power switching (usb 1.0)
- [ 0.885063] hub 6-0:1.0: no over-current protection
- [ 0.885065] hub 6-0:1.0: power on to power good time: 4ms
- [ 0.885068] hub 6-0:1.0: local power source is good
- [ 0.885069] hub 6-0:1.0: trying to enable port power on non-switchable hub
- [ 0.885108] ohci_hcd 0000:00:16.0: OHCI Host Controller
- [ 0.885163] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
- [ 0.885166] ohci_hcd 0000:00:16.0: enabled AMD prefetch quirk
- [ 0.885177] ohci_hcd 0000:00:16.0: created debug files
- [ 0.885178] ohci_hcd 0000:00:16.0: supports USB remote wakeup
- [ 0.885182] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
- [ 0.907825] hub 1-0:1.0: state 7 ports 5 chg 0038 evt 0000
- [ 0.907831] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
- [ 0.907836] ehci_hcd 0000:00:12.2: port 3 low speed --> companion
- [ 0.939768] ohci_hcd 0000:00:16.0: OHCI controller state
- [ 0.939772] ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 0.939775] ohci_hcd 0000:00:16.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 0.939777] ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0
- [ 0.939781] ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF
- [ 0.939784] ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.939791] ohci_hcd 0000:00:16.0: hcca frame #0005
- [ 0.939793] ohci_hcd 0000:00:16.0: roothub.a 02001204 POTPGT=2 NOCP NPS NDP=4(4)
- [ 0.939795] ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.939798] ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE
- [ 0.939801] ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.939803] ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.939805] ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.939808] ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.939813] usb usb7: default language 0x0409
- [ 0.939817] usb usb7: udev 1, busnum 7, minor = 768
- [ 0.939819] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.939820] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.939821] usb usb7: Product: OHCI Host Controller
- [ 0.939822] usb usb7: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ohci_hcd
- [ 0.939824] usb usb7: SerialNumber: 0000:00:16.0
- [ 0.939904] usb usb7: usb_probe_device
- [ 0.939906] usb usb7: configuration #1 chosen from 1 choice
- [ 0.939909] usb usb7: adding 7-0:1.0 (config #1, interface 0)
- [ 0.939950] hub 7-0:1.0: usb_probe_interface
- [ 0.939951] hub 7-0:1.0: usb_probe_interface - got id
- [ 0.939952] hub 7-0:1.0: USB hub found
- [ 0.939956] hub 7-0:1.0: 4 ports detected
- [ 0.939957] hub 7-0:1.0: standalone hub
- [ 0.939958] hub 7-0:1.0: no power switching (usb 1.0)
- [ 0.939959] hub 7-0:1.0: no over-current protection
- [ 0.939960] hub 7-0:1.0: power on to power good time: 4ms
- [ 0.939963] hub 7-0:1.0: local power source is good
- [ 0.939964] hub 7-0:1.0: trying to enable port power on non-switchable hub
- [ 0.939989] ehci_hcd 0000:00:16.2: HS companion for 0000:00:16.0
- [ 0.940030] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.940096] xhci_hcd 0000:02:00.0: xHCI Host Controller
- [ 0.940157] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
- [ 0.944511] xhci_hcd 0000:02:00.0: supports USB remote wakeup
- [ 0.944518] xhci_hcd 0000:02:00.0: irq 44, io mem 0xfe900000
- [ 0.944551] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
- [ 0.944555] xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
- [ 0.944559] xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
- [ 0.944562] xhci_hcd 0000:02:00.0: irq 76 for MSI/MSI-X
- [ 0.944566] xhci_hcd 0000:02:00.0: irq 77 for MSI/MSI-X
- [ 0.944569] xhci_hcd 0000:02:00.0: irq 78 for MSI/MSI-X
- [ 0.944573] xhci_hcd 0000:02:00.0: irq 79 for MSI/MSI-X
- [ 0.944576] xhci_hcd 0000:02:00.0: irq 80 for MSI/MSI-X
- [ 0.944649] usb usb8: default language 0x0409
- [ 0.944653] usb usb8: udev 1, busnum 8, minor = 896
- [ 0.944654] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.944655] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.944657] usb usb8: Product: xHCI Host Controller
- [ 0.944658] usb usb8: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera xhci_hcd
- [ 0.944659] usb usb8: SerialNumber: 0000:02:00.0
- [ 0.944748] usb usb8: usb_probe_device
- [ 0.944749] usb usb8: configuration #1 chosen from 1 choice
- [ 0.944751] xHCI xhci_add_endpoint called for root hub
- [ 0.944752] xHCI xhci_check_bandwidth called for root hub
- [ 0.944755] usb usb8: adding 8-0:1.0 (config #1, interface 0)
- [ 0.944794] hub 8-0:1.0: usb_probe_interface
- [ 0.944795] hub 8-0:1.0: usb_probe_interface - got id
- [ 0.944796] hub 8-0:1.0: USB hub found
- [ 0.944801] hub 8-0:1.0: 2 ports detected
- [ 0.944802] hub 8-0:1.0: standalone hub
- [ 0.944803] hub 8-0:1.0: no power switching (usb 1.0)
- [ 0.944804] hub 8-0:1.0: individual port over-current protection
- [ 0.944805] hub 8-0:1.0: Single TT
- [ 0.944806] hub 8-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.944807] hub 8-0:1.0: power on to power good time: 20ms
- [ 0.944809] hub 8-0:1.0: local power source is good
- [ 0.944811] hub 8-0:1.0: trying to enable port power on non-switchable hub
- [ 0.944837] xhci_hcd 0000:02:00.0: xHCI Host Controller
- [ 0.944891] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
- [ 0.944894] xhci_hcd 0000:02:00.0: supports USB remote wakeup
- [ 0.944907] usb usb9: skipped 1 descriptor after endpoint
- [ 0.944909] usb usb9: default language 0x0409
- [ 0.944912] usb usb9: udev 1, busnum 9, minor = 1024
- [ 0.944914] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
- [ 0.944915] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.944916] usb usb9: Product: xHCI Host Controller
- [ 0.944918] usb usb9: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera xhci_hcd
- [ 0.944919] usb usb9: SerialNumber: 0000:02:00.0
- [ 0.944984] usb usb9: usb_probe_device
- [ 0.944985] usb usb9: configuration #1 chosen from 1 choice
- [ 0.944986] xHCI xhci_add_endpoint called for root hub
- [ 0.944987] xHCI xhci_check_bandwidth called for root hub
- [ 0.944990] usb usb9: adding 9-0:1.0 (config #1, interface 0)
- [ 0.945027] hub 9-0:1.0: usb_probe_interface
- [ 0.945028] hub 9-0:1.0: usb_probe_interface - got id
- [ 0.945029] hub 9-0:1.0: USB hub found
- [ 0.945033] hub 9-0:1.0: 2 ports detected
- [ 0.945034] hub 9-0:1.0: standalone hub
- [ 0.945035] hub 9-0:1.0: no power switching (usb 1.0)
- [ 0.945036] hub 9-0:1.0: individual port over-current protection
- [ 0.945037] hub 9-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.945038] hub 9-0:1.0: power on to power good time: 20ms
- [ 0.945040] hub 9-0:1.0: local power source is good
- [ 0.945041] hub 9-0:1.0: trying to enable port power on non-switchable hub
- [ 0.956809] usbcore: registered new interface driver usblp
- [ 0.956810] Initializing USB Mass Storage driver...
- [ 0.956862] usbcore: registered new interface driver usb-storage
- [ 0.956863] USB Mass Storage support registered.
- [ 0.956912] usbcore: registered new interface driver libusual
- [ 0.956989] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.956990] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.957117] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.957229] mousedev: PS/2 mouse device common for all mice
- [ 0.957440] rtc_cmos 00:05: RTC can wake from S4
- [ 0.957550] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.957567] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.957635] md: raid0 personality registered for level 0
- [ 0.957761] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 0.957870] cpuidle: using governor ladder
- [ 0.957967] cpuidle: using governor menu
- [ 0.957968] EFI Variables Facility v0.08 2004-May-17
- [ 0.958724] ehci_hcd 0000:00:12.2: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 0.958739] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
- [ 0.958923] usbcore: registered new interface driver usbhid
- [ 0.958924] usbhid: USB HID core driver
- [ 0.976650] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 0.982986] snd_hda_intel 0000:01:00.1: irq 81 for MSI/MSI-X
- [ 0.987676] Netfilter messages via NETLINK v0.30.
- [ 0.987686] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.987839] ctnetlink v0.93: registering with nfnetlink.
- [ 0.987922] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.987948] TCP: cubic registered
- [ 0.987948] Initializing XFRM netlink socket
- [ 0.988163] NET: Registered protocol family 10
- [ 0.988267] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.988288] sit: IPv6 over IPv4 tunneling driver
- [ 0.988456] NET: Registered protocol family 17
- [ 0.988469] Key type dns_resolver registered
- [ 0.988743] PM: Hibernation image not present or could not be loaded.
- [ 0.988749] registered taskstats version 1
- [ 0.988976] Magic number: 4:867:993
- [ 0.988993] machinecheck machinecheck6: hash matches
- [ 0.989008] console [netcon0] enabled
- [ 0.989009] netconsole: network logging started
- [ 0.989237] ALSA device list:
- [ 0.989238] #0: HDA ATI SB at 0xfeb00000 irq 16
- [ 0.989239] #1: HDA ATI HDMI at 0xfea30000 irq 81
- [ 1.005711] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.009707] ehci_hcd 0000:00:12.2: port 4 full speed --> companion
- [ 1.009722] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 1.009734] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
- [ 1.060601] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 1.060627] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
- [ 1.111514] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
- [ 1.111524] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.160423] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.160455] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.160483] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.160512] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.161403] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.161447] ata2.00: ATA-7: ST3300631AS, 3.04, max UDMA/133
- [ 1.161453] ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.162405] usb 1-5: new high-speed USB device number 4 using ehci_hcd
- [ 1.162495] ata2.00: configured for UDMA/133
- [ 1.164454] ata5.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL05, max UDMA/133
- [ 1.169636] ata5.00: configured for UDMA/133
- [ 1.172464] ata1.00: ATA-8: Corsair Force 3 SSD, 5.03, max UDMA/133
- [ 1.172466] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.187382] ata3.00: HPA detected: current 976771055, native 976773168
- [ 1.187391] ata3.00: ATA-8: ST3500410AS, CC34, max UDMA/133
- [ 1.187395] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.188443] ata4.00: ATA-8: ST3500410AS, CC34, max UDMA/133
- [ 1.188449] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.193580] ata1.00: configured for UDMA/133
- [ 1.193778] scsi 0:0:0:0: Direct-Access ATA Corsair Force 3 5.03 PQ: 0 ANSI: 5
- [ 1.194097] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
- [ 1.194147] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.194149] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.194159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.194360] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.195339] sda: sda1 sda2
- [ 1.195616] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.195680] scsi 1:0:0:0: Direct-Access ATA ST3300631AS 3.04 PQ: 0 ANSI: 5
- [ 1.195847] sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
- [ 1.195871] sd 1:0:0:0: [sdb] Write Protect is off
- [ 1.195873] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.195883] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.195927] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 1.212336] sdb: sdb1 sdb2
- [ 1.212709] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 1.213343] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
- [ 1.213353] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.226754] ata3.00: configured for UDMA/133
- [ 1.226964] scsi 2:0:0:0: Direct-Access ATA ST3500410AS CC34 PQ: 0 ANSI: 5
- [ 1.227155] sd 2:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.227178] sd 2:0:0:0: [sdc] Write Protect is off
- [ 1.227180] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 1.227204] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.227302] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 1.227736] ata4.00: configured for UDMA/133
- [ 1.264205] usb 1-5: device descriptor read/64, error -32
- [ 1.271451] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 >
- [ 1.272197] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 1.272258] scsi 3:0:0:0: Direct-Access ATA ST3500410AS CC34 PQ: 0 ANSI: 5
- [ 1.272459] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.272532] sd 3:0:0:0: [sdd] Write Protect is off
- [ 1.272535] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 1.272565] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.272576] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 1.303000] sdd: sdd1 < sdd5 sdd6 > sdd2
- [ 1.303760] sd 3:0:0:0: [sdd] Attached SCSI disk
- [ 1.307081] scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL05 PQ: 0 ANSI: 5
- [ 1.413647] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.413652] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.414070] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 1.414183] sr 4:0:0:0: Attached scsi generic sg4 type 5
- [ 1.414264] md: Waiting for all devices to be available before autodetect
- [ 1.414266] md: If you don't use raid, use raid=noautodetect
- [ 1.414441] md: Autodetecting RAID arrays.
- [ 1.415932] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
- [ 1.415942] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.454661] md: Scanned 2 and added 2 devices.
- [ 1.454665] md: autorun ...
- [ 1.454668] md: considering sdd6 ...
- [ 1.454676] md: adding sdd6 ...
- [ 1.454683] md: adding sdc6 ...
- [ 1.454688] md: created md0
- [ 1.454690] md: bind<sdc6>
- [ 1.454710] md: bind<sdd6>
- [ 1.454723] md: running: <sdd6><sdc6>
- [ 1.455033] bio: create slab <bio-1> at 1
- [ 1.455038] md/raid0:md0: md_size is 1171876864 sectors.
- [ 1.455039] md: RAID0 configuration for md0 - 1 zone
- [ 1.455040] md: zone0=[sdc6/sdd6]
- [ 1.455042] zone-offset= 0KB, device-offset= 0KB, size= 585938432KB
- [ 1.455043]
- [ 1.455047] md0: detected capacity change from 0 to 600000954368
- [ 1.455095] md: ... autorun DONE.
- [ 1.456544] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
- [ 1.465000] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
- [ 1.466819] usb 1-5: device descriptor read/64, error -32
- [ 1.480641] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.480649] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
- [ 1.481480] Freeing unused kernel memory: 596k freed
- [ 1.481581] Write protecting the kernel read-only data: 12288k
- [ 1.481945] Freeing unused kernel memory: 56k freed
- [ 1.485293] Freeing unused kernel memory: 1644k freed
- [ 1.538825] loadkeys (1108) used greatest stack depth: 4464 bytes left
- [ 1.615541] Refined TSC clocksource calibration: 3500.185 MHz.
- [ 1.615549] Switching to clocksource tsc
- [ 1.618546] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
- [ 1.618556] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.669380] usb 1-5: new high-speed USB device number 5 using ehci_hcd
- [ 1.708175] udevd[1210]: starting version 171
- [ 1.720310] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
- [ 1.720320] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.771168] usb 1-5: device descriptor read/64, error -32
- [ 1.923894] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
- [ 1.923899] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.974789] usb 1-5: device descriptor read/64, error -32
- [ 2.126557] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
- [ 2.126561] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.177455] usb 1-5: new high-speed USB device number 6 using ehci_hcd
- [ 2.578721] usb 1-5: device not accepting address 6, error -32
- [ 2.629610] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
- [ 2.629620] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.680513] usb 1-5: new high-speed USB device number 7 using ehci_hcd
- [ 3.081764] usb 1-5: device not accepting address 7, error -32
- [ 3.081783] hub 1-0:1.0: unable to enumerate USB device on port 5
- [ 3.087742] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0038
- [ 3.087755] ehci_hcd 0000:00:12.2: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 3.087766] hub 1-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
- [ 3.191536] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
- [ 3.191548] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 3.191556] hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
- [ 3.295338] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100
- [ 3.295350] ehci_hcd 0000:00:12.2: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 3.295359] hub 1-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
- [ 3.399141] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
- [ 3.399161] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0038
- [ 3.399170] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
- [ 3.399177] hub 4-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
- [ 3.429021] rc (1105) used greatest stack depth: 4384 bytes left
- [ 3.504940] hub 4-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
- [ 3.566824] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 3.617721] usb 4-3: new low-speed USB device number 2 using ohci_hcd
- [ 3.684600] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 3.735503] usb 4-3: device descriptor read/64, error -32
- [ 3.903107] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 3.954008] usb 4-3: device descriptor read/64, error -32
- [ 4.116777] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 4.167681] usb 4-3: new low-speed USB device number 3 using ohci_hcd
- [ 4.234553] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 4.285455] usb 4-3: device descriptor read/64, error -32
- [ 4.326436] md0: unknown partition table
- [ 4.453136] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 4.504039] usb 4-3: device descriptor read/64, error -32
- [ 4.666727] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 4.717633] usb 4-3: new low-speed USB device number 4 using ohci_hcd
- [ 4.769378] EXT4-fs (sda1): re-mounted. Opts: (null)
- [ 5.120935] usb 4-3: device not accepting address 4, error -32
- [ 5.182749] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 5.233651] usb 4-3: new low-speed USB device number 5 using ohci_hcd
- [ 5.636809] usb 4-3: device not accepting address 5, error -32
- [ 5.636818] hub 4-0:1.0: unable to enumerate USB device on port 3
- [ 5.636823] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS
- [ 5.636826] hub 4-0:1.0: port 4, status 0101, change 0001, 12 Mb/s
- [ 5.740621] hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
- [ 5.802495] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
- [ 5.839058] r8169 0000:04:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
- [ 5.849369] r8169 0000:04:00.0: eth0: link down
- [ 5.849384] r8169 0000:04:00.0: eth0: link down
- [ 5.850452] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 5.853402] usb 4-4: new full-speed USB device number 6 using ohci_hcd
- [ 5.921270] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
- [ 5.973242] usb 4-4: device descriptor read/64, error -32
- [ 6.140920] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
- [ 6.191826] usb 4-4: device descriptor read/64, error -32
- [ 6.354518] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
- [ 6.405419] usb 4-4: new full-speed USB device number 7 using ohci_hcd
- [ 6.472293] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
- [ 6.523194] usb 4-4: device descriptor read/64, error -32
- [ 6.690876] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
- [ 6.741779] usb 4-4: device descriptor read/64, error -32
- [ 6.904527] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
- [ 6.955374] usb 4-4: new full-speed USB device number 8 using ohci_hcd
- [ 7.358682] usb 4-4: device not accepting address 8, error -32
- [ 7.420485] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
- [ 7.471388] usb 4-4: new full-speed USB device number 9 using ohci_hcd
- [ 7.874691] usb 4-4: device not accepting address 9, error -32
- [ 7.874707] hub 4-0:1.0: unable to enumerate USB device on port 4
- [ 7.874717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00010101 CSC PPS CCS
- [ 7.874724] hub 4-0:1.0: port 5, status 0101, change 0001, 12 Mb/s
- [ 7.978418] hub 4-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x101
- [ 8.003372] r8169 0000:04:00.0: eth0: link up
- [ 8.004441] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 8.040305] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 8.091210] usb 4-5: new full-speed USB device number 10 using ohci_hcd
- [ 8.158083] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 8.208985] usb 4-5: device descriptor read/64, error -32
- [ 8.376668] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 8.427568] usb 4-5: device descriptor read/64, error -32
- [ 8.590259] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 8.641160] usb 4-5: new full-speed USB device number 11 using ohci_hcd
- [ 8.708035] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 8.758938] usb 4-5: device descriptor read/64, error -32
- [ 8.926619] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 8.977521] usb 4-5: device descriptor read/64, error -32
- [ 9.140208] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 9.191116] usb 4-5: new full-speed USB device number 12 using ohci_hcd
- [ 9.594364] usb 4-5: device not accepting address 12, error -32
- [ 9.656231] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 9.707132] usb 4-5: new full-speed USB device number 13 using ohci_hcd
- [ 10.110444] usb 4-5: device not accepting address 13, error -32
- [ 10.110470] hub 4-0:1.0: unable to enumerate USB device on port 5
- [ 10.110477] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 10.110482] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 10.110486] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000
- [ 10.110491] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 10.110494] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 10.110498] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0020
- [ 301.544838] kworker/u:6 (898) used greatest stack depth: 4136 bytes left
- [ 1590.177804] r8169 0000:04:00.0: eth0: link down
- [ 1590.177868] r8169 0000:04:00.0: eth0: link down
- [ 1590.178812] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 1592.458337] r8169 0000:04:00.0: eth0: link up
- [ 1592.459388] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 1656.096281] r8169 0000:04:00.0: eth0: link down
- [ 1656.096299] r8169 0000:04:00.0: eth0: link down
- [ 1656.097192] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 1658.110323] r8169 0000:04:00.0: eth0: link up
- [ 1658.111287] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 1674.752772] r8169 0000:04:00.0: eth0: link down
- [ 1674.752833] r8169 0000:04:00.0: eth0: link down
- [ 1674.753679] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 1676.778814] r8169 0000:04:00.0: eth0: link up
- [ 1676.779766] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 2614.466172] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0008
- [ 2614.466184] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00010100 CSC PPS
- [ 2614.466193] hub 4-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
- [ 2614.569437] hub 4-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
- [ 2614.661350] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0010
- [ 2614.661361] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00010100 CSC PPS
- [ 2614.661370] hub 4-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
- [ 2614.765088] hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100
- [ 2676.919558] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2676.919573] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001003 0 ACK POWER sig=se0 CSC CONNECT
- [ 2676.919583] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 2676.944689] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC
- [ 2676.970642] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2677.074451] hub 2-0:1.0: debounce: port 1: total 150ms stable 100ms status 0x501
- [ 2677.125357] ehci_hcd 0000:00:13.2: port 1 full speed --> companion
- [ 2677.125376] ehci_hcd 0000:00:13.2: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 2677.125383] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
- [ 2677.176263] ehci_hcd 0000:00:13.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 2677.176289] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2677.176298] ehci_hcd 0000:00:13.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 2677.176306] hub 2-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 2677.280060] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 2677.280068] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2677.280076] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
- [ 2677.280083] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
- [ 2677.383862] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- [ 2677.445747] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 2677.496651] usb 5-1: new full-speed USB device number 2 using ohci_hcd
- [ 2677.562609] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 2677.613424] usb 5-1: device descriptor read/64, error -32
- [ 2677.780165] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 2677.831009] usb 5-1: device descriptor read/64, error -32
- [ 2677.993702] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 2678.044603] usb 5-1: new full-speed USB device number 3 using ohci_hcd
- [ 2678.110485] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 2678.161385] usb 5-1: device descriptor read/64, error -32
- [ 2678.328069] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 2678.378970] usb 5-1: device descriptor read/64, error -32
- [ 2678.541663] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 2678.592563] usb 5-1: new full-speed USB device number 4 using ohci_hcd
- [ 2678.993818] usb 5-1: device not accepting address 4, error -32
- [ 2679.055690] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 2679.106588] usb 5-1: new full-speed USB device number 5 using ohci_hcd
- [ 2679.507840] usb 5-1: device not accepting address 5, error -32
- [ 2679.507866] hub 5-0:1.0: unable to enumerate USB device on port 1
- [ 2679.507873] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2683.114261] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2683.114274] ehci_hcd 0000:00:12.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 2683.114284] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 2683.217751] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 2683.217764] ehci_hcd 0000:00:12.2: port 1 low speed --> companion
- [ 2683.268663] ehci_hcd 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 2683.268688] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2683.268697] ehci_hcd 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 2683.268705] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 2683.372459] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 2683.372467] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2683.372475] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
- [ 2683.372482] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
- [ 2683.476262] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
- [ 2683.538148] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2683.589051] usb 4-1: new low-speed USB device number 14 using ohci_hcd
- [ 2683.654941] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2683.705828] usb 4-1: device descriptor read/64, error -32
- [ 2683.872512] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2683.923413] usb 4-1: device descriptor read/64, error -32
- [ 2684.086104] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2684.137007] usb 4-1: new low-speed USB device number 15 using ohci_hcd
- [ 2684.202882] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2684.253784] usb 4-1: device descriptor read/64, error -32
- [ 2684.420468] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2684.471368] usb 4-1: device descriptor read/64, error -32
- [ 2684.634063] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2684.684963] usb 4-1: new low-speed USB device number 16 using ohci_hcd
- [ 2685.086282] usb 4-1: device not accepting address 16, error -32
- [ 2685.148077] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2685.198982] usb 4-1: new low-speed USB device number 17 using ohci_hcd
- [ 2685.600243] usb 4-1: device not accepting address 17, error -32
- [ 2685.600269] hub 4-0:1.0: unable to enumerate USB device on port 1
- [ 2685.600275] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0002
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement