Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 1.1.2 (Jan 19 2010 - 17:23:36)
- U-Boot code: 48D00000 -> 48D1B860 BSS: -> 48D1F670
- RAM Configuration:
- Bank #0: 48000000 128 MB
- SRAM Configuration:
- 128KB at 0x58000000
- Flash: 4 MB
- In: serial
- Out: serial
- Err: serial
- Extinguish LED
- Light LED
- Initialising disks
- No FIS received from device 0
- No FIS received from device 0
- No FIS received from device 1
- No FIS received from device 1
- ide_preinit failed
- Hit any key to stop autoboot: 0
- ## Booting image at 41020000 ...
- Image Name: Linux-2.6.24.4
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 1614872 Bytes = 1.5 MB
- Load Address: 48008000
- Entry Point: 48008000
- Verifying Checksum ... OK
- OK
- ## Loading Ramdisk Image at 4a000000 ...
- Image Name: Ramdisk
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 2262100 Bytes = 2.2 MB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- Starting kernel ...
- Uncompressing Linux.............................................................
- ......................................... done, booting the kernel.
- Linux version 2.6.24.4 (root@etrayz-build) ( cc version 4.2.1) #1 Tue Jan 19 17:
- 28:40 KST 2010
- CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
- Machine: Oxsemi NAS
- Ignoring unrecognised tag 0x00000000
- Memory policy: ECC disabled, Data cache writeback
- CPU0: D VIVT write-back cache
- CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
- CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- Kernel command line: console=ttyS0,115200 ro mac_adr=0x00,0x1c,0x85,0x20,0x4a,0x
- fe mem=128M root=/dev/ram0
- PID hash table entries: 512 (order: 9, 2048 bytes)
- Console: colour dummy device 80x30
- console [ttyS0] enabled
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 128MB = 128MB total
- Memory: 124316KB available (2940K code, 156K data, 108K init)
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- net_namespace: 64 bytes
- NET: Registered protocol family 16
- Number of DMA channels = 5, version = 4
- Allocating 891 SRAM generic DMA descriptors
- Chip Id: die-id 0x0dc9da7170c0 read back 0xbeefcafe
- PCI: bus0: Fast back to back transfers enabled
- SCSI subsystem initialized
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP reno registered
- checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
- Freeing initrd memory: 2209K
- Init Macpower NT2-GIGA-NAS(OX810) GPIO driver...
- GPIO driver registered
- thermAndFan: initializing - ox810
- SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug
- enabled
- SGI XFS Quota Management subsystem
- io scheduler noop registered
- io scheduler anticipatory registered (default)
- io scheduler deadline registered
- io scheduler cfq registered
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
- ÿserial8250: ttyS0 at MMIO 0x44900000 (irq = 0) is a 16550A
- RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
- lloop: modue loaded
- Driver 'sd' needs updating - please use bus_type methods
- ox810sata: OX810 sata core.
- scsi0 : oxnassata
- ata1: SATA max UDMA/133 irq 18
- ata1: SATA link down (SStatus 0 SControl 300)
- ox810sata: OX810 sata core.
- scsi1 : oxnassata
- ata2: SATA max UDMA/133 irq 18
- ata2: SATA link down (SStatus 0 SControl 300)
- physmap platform flash device: 00400000 at 41000000
- physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
- Amd/Fujitsu Extended Query Table at 0x0040
- physmap-flash.0: Swapping erase regions for broken CFI table.
- number of CFI chips: 1
- cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
- RedBoot partition parsing not available
- mice: PS/2 mouse device common for all mice
- i2c /dev entries driver
- rtc-ds1307 0-0068: rtc core: registered m41t00 as rtc0
- OXNAS bit-bash I2C driver initialisation OK
- md: linear personality registered for level -1
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
- TCP cubic registered
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- rtc-ds1307 0-0068: setting system clock to 2017-08-03 18:43:06 UTC (1501785786)
- md: Autodetecting RAID arrays.
- md: Scanned 0 and added 0 devices.
- md: autorun ...
- md: ... autorun DONE.
- RAMDISK: Compressed image found at block 0
- VFS: Mounted root (ext2 filesystem) readonly.
- Freeing init memory: 108K
- gmac: Unknown symbol mii_ethtool_sset
- gmac: Unknown symbol mii_check_media_ex
- gmac: Unknown symbol mii_check_link
- gmac: Unknown symbol mii_nway_restart
- gmac: Unknown symbol mii_ethtool_gset
- Probing for Synopsis GMAC, unit 0
- eth0: PHY is LSI ET1011C
- eth0: GMAC ver = 51, vendor ver = 17 at 0xe8000000, IRQ 8
- eth0: Found PHY at address 1, type 0x0282f014 -> 10/100/1000
- eth0: Ethernet addr: 00:1c:85:20:4a:fe
- eth0: PHY is LSI ET1011C
- CoPro: Programming start address as 0x9801e000 (basic adr = 0x9801e000)
- eth0: LSI ET1011C PHY no Rx clk workaround start
- Resetting GMAC
- eth0: LSI ET1011C PHY no Rx clk workaround end
- GMAC reset complete
- none scsi0
- none scsi1
- eth0: PHY is LSI ET1011C
- eth0: link down
- rtc_time : 18:43:13
- rtc_date : 2017-08-03
- 24hr : yes
- Thu Aug 3 18:43:13 UTC 2017
- rtc_time : 18:43:13
- rtc_date : 2017-08-03
- 24hr : yes
- Thu Aug 3 18:43:13 UTC 2017
- Thu Aug 3 18:43:13 2017 0.000000 seconds
- Thu Aug 3 18:43:13 2017 0.000000 seconds
- Thu Aug 3 18:43:13 UTC 2017
- Thu Aug 3 18:43:13 UTC 2017
- rdate: bad address 'time.bora.net'
- Thu Aug 3 18:43:13 2017 0.000000 seconds
- Thu Aug 3 18:43:14 2017 0.000000 seconds
- Thu Aug 3 18:43:13 UTC 2017
- /bin/sh: can't access tty; job control turned off
- / #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement