API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 21st, 2014
187
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.49 KB | None | 0 0
raw download clone embed print report
  1. OpenELEC:~ # dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 3.17.1 (openelec.tv@nmacleod.com) (gcc version 4.9.1 (GCC) ) #1 PREEMPT Mon Oct 20 21:41:46 BST 2014
  4. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [ 0.000000] Machine: BCM2708
  7. [ 0.000000] cma: Reserved 8 MiB at 0f800000
  8. [ 0.000000] Memory policy: Data cache writeback
  9. [ 0.000000] On node 0 totalpages: 65536
  10. [ 0.000000] free_area_init_node: node 0, pgdat c0a0bee4, node_mem_map cf5f4000
  11. [ 0.000000] Normal zone: 512 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
  14. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  15. [ 0.000000] pcpu-alloc: [0] 0
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  17. [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708.boardrev=0x1000010 bcm2708.serial=0x472f18d0 smsc95xx.macaddr=B8:27:EB:2F:18:D0 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
  18. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  19. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  20. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  21. [ 0.000000] Memory: 240968K/262144K available (6483K kernel code, 266K rwdata, 1468K rodata, 2034K init, 382K bss, 21176K reserved)
  22. [ 0.000000] Virtual kernel memory layout:
  23. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  24. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  25. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  26. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  27. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  28. [ 0.000000] .text : 0xc0008000 - 0xc07cbf4c (7952 kB)
  29. [ 0.000000] .init : 0xc07cc000 - 0xc09c8904 (2035 kB)
  30. [ 0.000000] .data : 0xc09ca000 - 0xc0a0cb28 ( 267 kB)
  31. [ 0.000000] .bss : 0xc0a0cb28 - 0xc0a6c4b0 ( 383 kB)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] Preemptible hierarchical RCU implementation.
  34. [ 0.000000] Offload RCU callbacks from all CPUs
  35. [ 0.000000] Offload RCU callbacks from CPUs: 0.
  36. [ 0.000000] NR_IRQS:394
  37. [ 0.000022] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
  38. [ 0.000066] Switching to timer-based delay loop, resolution 1000ns
  39. [ 0.000291] Console: colour dummy device 80x30
  40. [ 0.000490] console [tty0] enabled
  41. [ 0.000513] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.08 BogoMIPS (lpj=3333)
  42. [ 0.000535] pid_max: default: 32768 minimum: 301
  43. [ 0.000682] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.000705] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.001559] CPU: Testing write buffer coherency: ok
  46. [ 0.001954] Setting up static identity map for 0x65ad10 - 0x65ad48
  47. [ 0.004486] devtmpfs: initialized
  48. [ 0.022644] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  49. [ 0.024255] xor: measuring software checksum speed
  50. [ 0.057104] arm4regs : 973.200 MB/sec
  51. [ 0.090522] 8regs : 492.000 MB/sec
  52. [ 0.123935] 32regs : 598.800 MB/sec
  53. [ 0.123953] xor: using function: arm4regs (973.200 MB/sec)
  54. [ 0.124399] regulator-dummy: no parameters
  55. [ 0.125149] NET: Registered protocol family 16
  56. [ 0.130581] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  57. [ 0.131458] cpuidle: using governor ladder
  58. [ 0.131492] cpuidle: using governor menu
  59. [ 0.131935] bcm2708.uart_clock = 3000000
  60. [ 0.134475] mailbox: Broadcom VideoCore Mailbox driver
  61. [ 0.134579] bcm2708_vcio: mailbox at f200b880
  62. [ 0.134695] bcm_power: Broadcom power driver
  63. [ 0.134714] bcm_power_open() -> 0
  64. [ 0.134725] bcm_power_request(0, 8)
  65. [ 0.635433] bcm_mailbox_read -> 00000080, 0
  66. [ 0.635451] bcm_power_request -> 0
  67. [ 0.635607] Serial: AMBA PL011 UART driver
  68. [ 0.635775] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  69. [ 0.729251] raid6: int32x1 46 MB/s
  70. [ 0.786385] raid6: int32x2 70 MB/s
  71. [ 0.843088] raid6: int32x4 94 MB/s
  72. [ 0.899909] raid6: int32x8 99 MB/s
  73. [ 0.899928] raid6: using algorithm int32x8 (99 MB/s)
  74. [ 0.899939] raid6: using intx1 recovery algorithm
  75. [ 0.900707] SCSI subsystem initialized
  76. [ 0.901193] usbcore: registered new interface driver usbfs
  77. [ 0.901327] usbcore: registered new interface driver hub
  78. [ 0.901564] usbcore: registered new device driver usb
  79. [ 0.903604] Switched to clocksource stc
  80. [ 0.917604] NET: Registered protocol family 2
  81. [ 0.918916] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  82. [ 0.918983] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  83. [ 0.919040] TCP: Hash tables configured (established 2048 bind 2048)
  84. [ 0.919122] TCP: reno registered
  85. [ 0.919147] UDP hash table entries: 256 (order: 0, 4096 bytes)
  86. [ 0.919178] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  87. [ 0.919498] NET: Registered protocol family 1
  88. [ 0.920008] RPC: Registered named UNIX socket transport module.
  89. [ 0.920032] RPC: Registered udp transport module.
  90. [ 0.920044] RPC: Registered tcp transport module.
  91. [ 0.920055] RPC: Registered tcp NFSv4.1 backchannel transport module.
  92. [ 1.100171] bcm2708_dma: DMA manager at f2007000
  93. [ 1.100484] bcm2708_gpio: bcm2708_gpio_probe c09d6750
  94. [ 1.100912] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  95. [ 1.102294] futex hash table entries: 256 (order: -1, 3072 bytes)
  96. [ 1.118025] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  97. [ 1.121017] NFS: Registering the id_resolver key type
  98. [ 1.121106] Key type id_resolver registered
  99. [ 1.121123] Key type id_legacy registered
  100. [ 1.121177] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  101. [ 1.123688] JFS: nTxBlock = 1946, nTxLock = 15572
  102. [ 1.124835] SGI XFS with security attributes, no debug enabled
  103. [ 1.128999] msgmni has been set to 486
  104. [ 1.132526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  105. [ 1.132569] io scheduler noop registered (default)
  106. [ 1.132592] io scheduler deadline registered
  107. [ 1.132657] io scheduler cfq registered
  108. [ 1.134242] BCM2708FB: allocated DMA memory 4fc00000
  109. [ 1.134311] BCM2708FB: allocated DMA channel 0 @ f2007000
  110. [ 1.160484] Console: switching to colour frame buffer device 200x75
  111. [ 1.182066] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  112. [ 1.182490] uart-pl011 dev:f1: no DMA platform data
  113. [ 1.182529] vc-cma: Videocore CMA driver
  114. [ 1.182542] vc-cma: vc_cma_base = 0x00000000
  115. [ 1.182554] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  116. [ 1.182564] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  117. [ 1.193310] brd: module loaded
  118. [ 1.193570] loop: module loaded
  119. [ 1.194044] nbd: registered device at major 43
  120. [ 1.204834] vchiq: vchiq_init_state: slot_zero = 0xcf800000, is_master = 0
  121. [ 1.205894] Loading iSCSI transport class v2.0-870.
  122. [ 1.206710] iscsi: registered transport (tcp)
  123. [ 1.208019] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
  124. [ 1.208951] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  125. [ 1.209123] tun: Universal TUN/TAP device driver, 1.6
  126. [ 1.209142] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  127. [ 1.209604] PPP generic driver version 2.4.2
  128. [ 1.210542] usbcore: registered new interface driver smsc95xx
  129. [ 1.210742] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  130. [ 1.410978] Core Release: 2.80a
  131. [ 1.411014] Setting default values for core params
  132. [ 1.411061] Finished setting default values for core params
  133. [ 1.611275] Using Buffer DMA mode
  134. [ 1.611302] Periodic Transfer Interrupt Enhancement - disabled
  135. [ 1.611313] Multiprocessor Interrupt Enhancement - disabled
  136. [ 1.611326] OTG VER PARAM: 0, OTG VER FLAG: 0
  137. [ 1.611344] Dedicated Tx FIFOs mode
  138. [ 1.611735] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xcfc14000 dma = 0x4fc14000 len=9024
  139. [ 1.611772] FIQ FSM acceleration enabled for :
  140. [ 1.611772] Non-periodic Split Transactions
  141. [ 1.611772] Periodic Split Transactions
  142. [ 1.611772] High-Speed Isochronous Endpoints
  143. [ 1.611801] dwc_otg: Microframe scheduler enabled
  144. [ 1.611864] WARN::hcd_init:473: FIQ at 0xc04feca0
  145. [ 1.611883] WARN::hcd_init:474: FIQ ASM at 0xc04fef7c length 36
  146. [ 1.611916] WARN::hcd_init:500: MPHI regs_base at 0xd0936000
  147. [ 1.611949] dwc_otg bcm2708_usb: DWC OTG Controller
  148. [ 1.612009] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  149. [ 1.612069] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  150. [ 1.612113] Init: Port Power? op_state=1
  151. [ 1.612125] Init: Power Port (0)
  152. [ 1.612442] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  153. [ 1.612468] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  154. [ 1.612485] usb usb1: Product: DWC OTG Controller
  155. [ 1.612502] usb usb1: Manufacturer: Linux 3.17.1 dwc_otg_hcd
  156. [ 1.612516] usb usb1: SerialNumber: bcm2708_usb
  157. [ 1.613460] hub 1-0:1.0: USB hub found
  158. [ 1.613544] hub 1-0:1.0: 1 port detected
  159. [ 1.614245] dwc_otg: FIQ enabled
  160. [ 1.614267] dwc_otg: NAK holdoff enabled
  161. [ 1.614278] dwc_otg: FIQ split-transaction FSM enabled
  162. [ 1.614345] Module dwc_common_port init
  163. [ 1.614724] usbcore: registered new interface driver uas
  164. [ 1.614970] usbcore: registered new interface driver usb-storage
  165. [ 1.615417] mousedev: PS/2 mouse device common for all mice
  166. [ 1.615726] i2c /dev entries driver
  167. [ 1.615931] bcm2708_i2c_init_pinmode(0,0)
  168. [ 1.615948] bcm2708_i2c_init_pinmode(0,1)
  169. [ 1.616370] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
  170. [ 1.616441] bcm2708_i2c_init_pinmode(1,2)
  171. [ 1.616455] bcm2708_i2c_init_pinmode(1,3)
  172. [ 1.617405] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
  173. [ 1.618418] bcm2835-cpufreq: min=700000 max=900000
  174. [ 1.620144] sdhci: Secure Digital Host Controller Interface driver
  175. [ 1.620160] sdhci: Copyright(c) Pierre Ossman
  176. [ 1.620383] DMA channels allocated for the MMC driver
  177. [ 1.646982] Load BCM2835 MMC driver
  178. [ 1.647241] sdhci-pltfm: SDHCI platform and OF driver helper
  179. [ 1.647673] hidraw: raw HID events driver (C) Jiri Kosina
  180. [ 1.650215] usbcore: registered new interface driver usbhid
  181. [ 1.650230] usbhid: USB HID core driver
  182. [ 1.650707] TCP: cubic registered
  183. [ 1.657380] NET: Registered protocol family 10
  184. [ 1.660775] NET: Registered protocol family 17
  185. [ 1.663062] Key type dns_resolver registered
  186. [ 1.675329] Btrfs loaded
  187. [ 1.682282] Freeing unused kernel memory: 2032K (c07cc000 - c09c8000)
  188. [ 1.694538] mmc0: host does not support reading read-only switch. assuming write-enable.
  189. [ 1.696574] mmc0: new high speed SDHC card at address 0001
  190. [ 1.700491] mmcblk0: mmc0:0001 00000 14.6 GiB
  191. [ 1.701769] mmcblk0: p1 p2
  192. [ 1.813885] Indeed it is in host mode hprt0 = 00021501
  193. [ 2.017113] usb 1-1: new high-speed USB device number 2 using dwc_otg
  194. [ 2.017280] Indeed it is in host mode hprt0 = 00001101
  195. [ 2.240715] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  196. [ 2.240744] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  197. [ 2.241578] hub 1-1:1.0: USB hub found
  198. [ 2.241712] hub 1-1:1.0: 5 ports detected
  199. [ 2.520488] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  200. [ 2.614054] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  201. [ 2.614083] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  202. [ 2.616922] smsc95xx v1.0.4
  203. [ 2.662632] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2f:18:d0
  204. [ 2.673396] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  205. [ 2.674347] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  206. [ 2.682376] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
  207. [ 2.740506] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
  208. [ 2.841222] usb 1-1.4: New USB device found, idVendor=046e, idProduct=5578
  209. [ 2.841254] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  210. [ 2.841268] usb 1-1.4: Product: USB MCE Cordless Remote Control.
  211. [ 2.841280] usb 1-1.4: Manufacturer: BTC
  212. [ 2.851578] input: BTC USB MCE Cordless Remote Control. as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046E:5578.0001/input/input0
  213. [ 2.852173] topseed 0003:046E:5578.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB MCE Cordless Remote Control.] on usb-bcm2708_usb-1.4/input0
  214. [ 2.865086] input: BTC USB MCE Cordless Remote Control. as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046E:5578.0002/input/input1
  215. [ 2.865882] topseed 0003:046E:5578.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [BTC USB MCE Cordless Remote Control.] on usb-bcm2708_usb-1.4/input1
  216. [ 3.137609] random: nonblocking pool is initialized
  217. [ 4.070945] bcm2708_rng_init=d09d4000
  218. [ 4.982610] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CODEC pcm512x.1-004d not registered
  219. [ 4.982684] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  220. [ 4.982720] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  221. [ 5.867740] systemd-journald[176]: Received request to flush runtime journal from PID 1
  222. [ 5.911639] systemd-udevd[182]: starting version 216
  223. [ 6.131717] Console: switching to colour dummy device 80x30
  224. [ 7.042332] pcm512x 1-004d: Failed to get supply 'AVDD': -517
  225. [ 7.042362] pcm512x 1-004d: Failed to get supplies: -517
  226. [ 7.042477] i2c 1-004d: Driver pcm512x requests probe deferral
  227. [ 7.042744] pcm512x 1-004c: Failed to get supply 'AVDD': -517
  228. [ 7.042764] pcm512x 1-004c: Failed to get supplies: -517
  229. [ 7.042863] i2c 1-004c: Driver pcm512x requests probe deferral
  230. [ 7.059270] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CODEC pcm512x.1-004d not registered
  231. [ 7.059349] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  232. [ 7.059385] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  233. [ 7.059623] pcm512x 1-004d: Failed to get supply 'AVDD': -517
  234. [ 7.059644] pcm512x 1-004d: Failed to get supplies: -517
  235. [ 7.059746] i2c 1-004d: Driver pcm512x requests probe deferral
  236. [ 7.059984] pcm512x 1-004c: Failed to get supply 'AVDD': -517
  237. [ 7.060004] pcm512x 1-004c: Failed to get supplies: -517
  238. [ 7.060099] i2c 1-004c: Driver pcm512x requests probe deferral
  239. [ 9.037350] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  240. [ 9.038106] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  241. [ 9.188758] input: eventlircd as /devices/virtual/input/input2
  242. [ 10.545128] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  243. [ 10.552183] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  244. OpenELEC:~ # lsmod
  245. Module Size Used by
  246. snd_soc_pcm512x_i2c 1481 0
  247. snd_soc_pcm512x 6356 1 snd_soc_pcm512x_i2c
  248. snd_soc_tas5713 4760 0
  249. snd_soc_hifiberry_dacplus 2059 0
  250. snd_soc_wm8804 7092 0
  251. regmap_spi 1465 1 snd_soc_wm8804
  252. regmap_i2c 1974 3 snd_soc_wm8804,snd_soc_pcm512x_i2c,snd_soc_tas5713
  253. snd_soc_bcm2708_i2s 5593 0
  254. regmap_mmio 2181 1 snd_soc_bcm2708_i2s
  255. snd_soc_core 104264 5 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_tas5713,snd_soc_hifiberry_dacplus,snd_soc_bcm2708_i2s
  256. snd_compress 7084 1 snd_soc_core
  257. snd_pcm_dmaengine 2935 1 snd_soc_core
  258. snd_pcm 63094 3 snd_soc_wm8804,snd_soc_core,snd_pcm_dmaengine
  259. snd_timer 17712 1 snd_pcm
  260. snd 41549 4 snd_soc_core,snd_timer,snd_pcm,snd_compress
  261. bcm2708_rng 812 0
  262. OpenELEC:~ # aplay -l
  263. aplay: device_list:268: no soundcards found...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!