Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-106-generic] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 3.5" HDD DT01ACA...
- Device Model: TOSHIBA DT01ACA300
- Serial Number: 86M5YVYAS
- LU WWN Device Id: 5 000039 fe6c2b5fb
- Firmware Version: MX6OABB0
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Mon Sep 16 13:07:09 2019 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: (21648) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 361) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 070 070 016 Pre-fail Always - 314376192
- 2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 68
- 3 Spin_Up_Time 0x0007 145 145 024 Pre-fail Always - 395 (Average 393)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 37
- 5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 640
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 001 001 020 Pre-fail Offline FAILING_NOW 128
- 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 24615
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 37
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 740
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 740
- 194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 23/35)
- 196 Reallocated_Event_Count 0x0032 067 067 000 Old_age Always - 774
- 197 Current_Pending_Sector 0x0022 001 001 000 Old_age Always - 11192
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 3
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 1508 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1508 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 e0 20 8d 7b 08 Error: UNC at LBA = 0x087b8d20 = 142314784
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 e0 30 20 8d 7b 40 08 1d+04:25:55.753 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 08 1d+04:25:55.745 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 08 1d+04:25:55.745 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 08 1d+04:25:55.743 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 08 1d+04:25:55.743 SET FEATURES [Set transfer mode]
- Error 1507 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 38 c8 1b 72 0b Error: UNC at LBA = 0x0b721bc8 = 192027592
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 e0 28 20 8d 7b 40 08 1d+04:25:51.861 READ FPDMA QUEUED
- 60 38 20 c8 1b 72 40 08 1d+04:25:51.861 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 08 1d+04:25:51.853 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 08 1d+04:25:51.853 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 08 1d+04:25:51.851 IDENTIFY DEVICE
- Error 1506 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 80 48 1b 72 0b Error: UNC at LBA = 0x0b721b48 = 192027464
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 38 18 c8 1b 72 40 08 1d+04:25:48.068 READ FPDMA QUEUED
- 60 e0 10 20 8d 7b 40 08 1d+04:25:48.068 READ FPDMA QUEUED
- 60 80 08 48 1b 72 40 08 1d+04:25:48.068 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 08 1d+04:25:48.060 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 08 1d+04:25:48.060 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- Error 1505 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 70 80 35 b3 0b Error: UNC at LBA = 0x0bb33580 = 196294016
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 38 00 c8 1b 72 40 08 1d+04:25:44.357 READ FPDMA QUEUED
- 60 80 f0 48 1b 72 40 08 1d+04:25:44.357 READ FPDMA QUEUED
- 60 70 e8 80 35 b3 40 08 1d+04:25:44.357 READ FPDMA QUEUED
- 60 e0 e0 20 8d 7b 40 08 1d+04:25:44.357 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 08 1d+04:25:44.349 SET FEATURES [Enable SATA feature]
- Error 1504 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 80 c8 1a 72 0b Error: UNC at LBA = 0x0b721ac8 = 192027336
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 e0 d8 20 8d 7b 40 08 1d+04:25:40.465 READ FPDMA QUEUED
- 60 70 d0 80 35 b3 40 08 1d+04:25:40.465 READ FPDMA QUEUED
- 60 80 c8 48 1b 72 40 08 1d+04:25:40.465 READ FPDMA QUEUED
- 60 38 c0 c8 1b 72 40 08 1d+04:25:40.465 READ FPDMA QUEUED
- 60 80 b8 c8 1a 72 40 08 1d+04:25:40.465 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 24604 2673055535
- # 2 Extended offline Completed: read failure 20% 24561 -
- # 3 Short offline Completed without error 00% 24532 -
- # 4 Short offline Completed without error 00% 24508 -
- # 5 Short offline Completed: read failure 90% 24484 3727434880
- # 6 Short offline Completed without error 00% 24460 -
- # 7 Short offline Completed without error 00% 24436 -
- # 8 Extended offline Completed without error 00% 24394 -
- # 9 Short offline Completed without error 00% 24364 -
- #10 Short offline Completed without error 00% 24340 -
- #11 Short offline Completed without error 00% 24316 -
- #12 Short offline Completed without error 00% 24292 -
- #13 Short offline Completed: read failure 90% 24268 3680138088
- #14 Extended offline Completed: read failure 90% 24220 -
- #15 Short offline Completed without error 00% 24196 -
- #16 Short offline Completed: read failure 90% 24172 3943790693
- #17 Short offline Completed without error 00% 24148 -
- #18 Short offline Completed without error 00% 24124 -
- #19 Short offline Completed without error 00% 24101 -
- #20 Extended offline Completed without error 00% 24062 -
- #21 Short offline Completed without error 00% 24028 -
- 3 of 6 failed self-tests are outdated by newer successful extended offline self-test # 8
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement