Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:0;READ:0;0.0;CHK:0;
- no sdio debug board detected
- TE: 499372
- BL2 Built : 14:59:36, Aug 9 2017.
- gxl ge8c6a83 - xiaobo.gu@droid12
- set vdd cpu_a to 1120 mv
- set vdd cpu_b to 1050 mv
- set vddee to 1000 mv
- Board ID = 7
- CPU clk: 1200MHz
- DQS-corr enabled
- DDR scramble enabled
- DDR3 chl: Rank0+1 @ 912MHz - FAIL
- DDR4 chl: Rank0+1 @ 1008MHz - PASS
- Rank0: 2048MB(auto)-2T-18
- Rank1: 1024MB(auto)-2T-18
- DataBus test pass!
- AddrBus test pass!
- Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000
- New fip structure!
- Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600
- Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002c600
- Load bl33 from SD, src: 0x00050200, des: 0x01000000, size: 0x00085000
- NOTICE: BL3-1: v1.0(release):801e730
- NOTICE: BL3-1: Built : 22:09:38, Aug 10 2017
- mpu_config_enable:ok
- [Image: gxl_v1.1.3244-a3237e2 2017-08-16 14:01:18 hong.guo@droid04]
- OPS=0x82
- wdt: reset registers!
- da 14 14 da 62 d 1a 1c 77 6f ca 5 [0.988008 Inits done]
- secure task start!
- high task start!
- low task start!
- ERROR: Error initializing runtime service opteed_fast
- U-Boot 2019.04 (Aug 10 2019 - 09:30:27 +0300) khadas-vim2
- DRAM: 3 GiB
- MMC: mmc@70000: 0, mmc@72000: 1, mmc@74000: 2
- In: serial
- Out: serial
- Err: serial
- [BL31]: tee size: 0
- [BL31]: tee size: 0
- Net:
- Warning: ethernet@c9410000 (eth0) using random MAC address - 8e:43:cf:90:5e:28
- eth0: ethernet@c9410000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found U-Boot script /boot.scr.uimg
- 2331 bytes read in 1 ms (2.2 MiB/s)
- ## Executing script at 08000000
- **KRESCUE LOAD by fatload mmc 1 FROM // // **
- load env
- 518 bytes read in 5 ms (100.6 KiB/s)
- env import -t 0x1000000 206
- load dtb to 0x08008000
- fatload mmc 1 0x08008000 /rescue/linux.dtb
- 29182 bytes read in 5 ms (5.6 MiB/s)
- fatload mmc 1 0x50000000 /rescue/linux.dtb
- 29182 bytes read in 2 ms (13.9 MiB/s)
- load logo
- fatload mmc 1 0x1000000 /rescue/splash.bmp.gz
- 28264 bytes read in 5 ms (5.4 MiB/s)
- Unknown command 'bmp' - try 'help'
- load initrd
- fatload mmc 1 0x40000000 /rescue/uInitrd
- 5763136 bytes read in 250 ms (22 MiB/s)
- bootm 0x30000000 0x40000000 0x50000000
- booti 1080000 0x40000000 0x50000000
- [i] bootargs: root=/dev/ram0 rw init=/init panic=10 net.ifnames=0 loglevel=3 passw=khadas ap_ssid=Krescue ap_passw=12345678 wifi_mode=2g script=sd:hello.sh script=sd:sd2ram.sh eth_hw=C0:4A:00:C0:3F:DB booted= hwver= console=tty0 console=ttyAML0,115200n8 console=ttyS0,115200n8 no_console_suspend consoleblank=0 vout=,enable hdmitx=, hdmimode= cvbsmode= osd_reverse= video_reverse= jtag= reboot_mode= ddr_size=
- [i] bootcmd: run distro_bootcmd
- activate emmc before run
- switch to partitions #0, OK
- mmc1 is current device
- [i] sleep 1 sec Ctrl+C for break boot
- load raw kernel
- fatload mmc 1 1080000 /rescue/Image
- 12128264 bytes read in 518 ms (22.3 MiB/s)
- ## Loading init Ramdisk from Legacy Image at 40000000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (uncompressed)
- Data Size: 5763072 Bytes = 5.5 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 50000000
- Booting using the fdt blob at 0x50000000
- Loading Ramdisk to bd9da000, end bdf59000 ... OK
- Loading Device Tree to 00000000bd9cf000, end 00000000bd9d91fd ... OK
- Starting kernel ...
- domain-0 init dvfs: 4
- domain-1 init dvfs: 4
- BusyBox v1.28.4 () built-in shell (ash)
- OpenWrt 18.06.3, r7798-97ae9e0ccb
- Khadas ## hyphop ##
- _ ______
- | |/ / _ \ ___ ___ ___ _ _ ___
- | ' /| |_) / _ \/ __|/ __| | | |/ _ \
- | . \| _ < __/\__ \ (__| |_| | __/
- |_|\_\_| \_\___||___/\___|\__,_|\___|
- extreme tiny and fast rescue system
- BUILD: Mon Aug 12 12:09:31 MSK 2019
- =====================================
- HELP: type 'help' for more info
- [i] POST_CONFIG: passw=khadas ap_ssid=Krescue ap_passw=12345678 wifi_mode=2g script=sd:hello.sh script=sd:sd2ram.sh eth_hw=C0:4A:00:C0:3F:DB
- root@(none):/#
- root@Krescue:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement