Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.08.21 18:03:37 =~=~=~=~=~=~=~=~=~=~=~=
- CFE version 1.0.37-102.6 for BCM96368 (32bit,SP,BE)
- Build Date: Mon Mar 2 15:45:35 CST 2009 (root@localhost.localdomain)
- Copyright (C) 2000-2008 Broadcom Corporation.
- Parallel flash device: name MX29LV320AT, id 0x22a7, size 4096KB
- CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
- CPU running TP0
- Total memory: 33554432 bytes (32MB)
- Boot Address 0xb8000000
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.100
- Gateway IP address :
- Run from flash/host (f/h) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 3
- Boot image (0=latest, 1=previous) : 0
- Board Id (0-4) : 96368MVWG
- Number of MAC Addresses (1-32) : 11
- Base MAC Address : 00:e0:fc:09:09:09
- PSI Size (1-64) KBytes : 64
- Main Thread Number [0|1] : 0
- *** Press any key to stop auto run (3 seconds) ***
- Auto run second count down: 33210
- Decompression OK!
- Entry at 0x80235000
- Closing network.
- Disabling Switch ports.
- Flushing Receive Buffers...
- 0 buffers found.
- Closing DMA Channels.
- Starting program at 0x80235000
- Linux version 2.6.21.5 (root@g40420m) (gcc version 4.2.3) #9 Sat Aug 15 17:40:59 CST 2009
- Flash Chip ID = 0022
- Pri Table Addr = 0040
- ulBootFlag = 0003
- ATP_FLASHCBB_InitSector i=1,ulBase=0x00000000
- ATP_FLASHCBB_InitSector i=0,ulBase=0x00000000
- Flash 0 at 0xb8000000
- Size : 4 MB
- Regions : 2
- 0 : 0x003f0000 - 0x00002000 * 8
- 1 : 0x00000000 - 0x00010000 * 63
- CHIP96368 prom init
- CPU revision is: 0002a031
- Determined physical RAM map:
- memory: 01f00000 @ 00000000 (usable)
- On node 0 totalpages: 7936
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 4064 pages, LIFO batch:0
- Normal zone: 30 pages used for memmap
- Normal zone: 3810 pages, LIFO batch:0
- Built 1 zonelists. Total pages: 7874
- Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
- brcm mips: enabling icache and dcache...
- Primary instruction cache 64kB, physically tagged, 4-way, linesize 16 bytes.
- Primary data cache 32kB, 2-way, linesize 16 bytes.
- Synthesized TLB refill handler (21 instructions).
- Synthesized TLB load handler fastpath (33 instructions).
- Synthesized TLB store handler fastpath (33 instructions).
- Synthesized TLB modify handler fastpath (32 instructions).
- PID hash table entries: 128 (order: 7, 512 bytes)
- Using 200.000 MHz high precision timer.
- Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
- Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Memory: 28940k/31744k available (1770k kernel code, 2804k reserved, 421k data, 92k init, 0k highmem)
- KLOB Pool 1 Initialized: 1048576 bytes <0x80300000 ... 0x80400000>
- Calibrating delay loop... 398.95 BogoMIPS (lpj=997376)
- Mount-cache hash table entries: 512
- NET: Registered protocol family 16
- registering PCI controller with io_map_base unset
- BLOG v1.0 Initialized
- NET: Registered protocol family 8
- NET: Registered protocol family 20
- Time: MIPS clocksource has been installed.
- NET: Registered protocol family 2
- IP route cache hash table entries: 128 (order: -3, 512 bytes)
- TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- TCP reno registered
- squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
- squashfs: LZMA suppport for slax.org by jro
- io scheduler noop registered (default)
- PPP generic driver version 2.4.2
- NET: Registered protocol family 24
- IMQ starting with 3 devices...
- IMQ driver loaded successfully.
- Hooking IMQ before NAT on PREROUTING.
- Hooking IMQ after NAT on POSTROUTING.
- ===start to init mtd=222========
- bcm963xx_mtd driver v2.0
- ==boot from main kernel==
- Registered device mtd[BCM63XX RootFS] dev[0] Flash[0xb8010100,2494464]
- bhal: bhal_init entry
- =====>Now,begin dying...
- D%G
- CFE version 1.0.37-102.6 for BCM96368 (32bit,SP,BE)
- Build Date: Mon Mar 2 15:45:35 CST 2009 (root@localhost.localdomain)
- Copyright (C) 2000-2008 Broadcom Corporation.
- Parallel flash device: name MX29LV320AT, id 0x22a7, size 4096KB
- CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
- CPU running TP0
- Total memory: 33554432 bytes (32MB)
- Boot Address 0xb8000000
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.100
- Gateway IP address :
- Run from flash/host (f/h) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 3
- Boot image (0=latest, 1=previous) : 0
- Board Id (0-4) : 96368MVWG
- Number of MAC Addresses (1-32) : 11
- Base MAC Address : 00:e0:fc:09:09:09
- PSI Size (1-64) KBytes : 64
- Main Thread Number [0|1] : 0
- *** Press any key to stop auto run (3 seconds) ***
- Auto run second count down: 33
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement