Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2019-05-26 21:56:02] [Output] : ★ Anna Pohl bends down to touch her toes, then moves to the rear of the 86
- [2019-05-26 21:56:20] [Output] : ★ Anna Pohl opens the rear hatch revealing a folded down back seat
- [2019-05-26 21:56:42] [Output] : ★ there would be 4 rims and 4 tyres in the car ((Anna Pohl))
- [2019-05-26 21:56:53] [Output] : ★ Anna Pohl starts taking out the items one by one
- [2019-05-26 21:58:17] [Output] : ★ Anna Pohl sets them down by the tyre changer
- [2019-05-26 21:59:22] [Output] : ★ Anna Pohl sets one of the rims on the machine
- [2019-05-26 22:00:37] [Output] : ★ Anna Pohl takes one of the tyres and spreads a dollup of dry soap on the bead
- [2019-05-26 22:01:31] [Output] : ★ Anna Pohl sets the tyre atop the rim and turns it applying downward force
- [2019-05-26 22:01:56] [Output] : ★ the lower bead would run over the upper lip of the rim ((Anna Pohl))
- [2019-05-26 22:02:44] [Output] : ★ Anna Pohl lowers the alignment tongue of the machine onto the wheel/tyre assembly into place
- [2019-05-26 22:03:26] [Output] : ★ Anna Pohl steps on the pedal to make the assembly start rotating on the machine
- [2019-05-26 22:03:57] [Output] : ★ guiding the tyre along until the upper bead runs over the upper lip of the rim ((Anna Pohl))
- [2019-05-26 22:04:10] [Output] : ★ Anna Pohl releases the pedal
- [2019-05-26 22:04:24] [Output] : ★ the wheel assembly would release from the machine ((Anna Pohl))
- [2019-05-26 22:08:39] [Output] : ★ Anna Pohl would take the assembled wheel and tyre combe off the horisontal bed of the machine
- [2019-05-26 22:10:36] [Output] : ★ Anna Pohl sets the assembly down to the side for the moment, as shed take rim #2 and put it on the
- [2019-05-26 22:10:40] [Output] : ★ tyre changer ((Anna Pohl))
- [2019-05-26 22:11:03] [Output] : ★ Anna Pohl presses the pedal to lock the rim in place on the machine
- [2019-05-26 22:11:35] [Output] : ★ Anna Pohl takes another dollup of dry soap and smears it on the beads of tyre #2
- [2019-05-26 22:12:01] [Output] : ★ Anna Pohl sets the tyre atop the rim and starts wiggling it on the rim applying downward force
- [2019-05-26 22:12:42] [Output] : ★ the lower bead of the tyre would roll over the upper lip of the rim ((Anna Pohl))
- [2019-05-26 22:13:07] [Output] : ★ Anna Pohl then lowers the bead setting assist arm onto the assembly
- [2019-05-26 22:13:57] [Output] : ★ Anna Pohl steps on the pedal to make the assembly rotate on the machine, guiding the tyre along
- [2019-05-26 22:14:16] [Output] : ★ until the top bead of the tyre runs over the top lip of the rim ((Anna Pohl))
- [2019-05-26 22:14:36] [Output] : ★ Anna Pohl moves the bead setting assist lever away from the combo
- [2019-05-26 22:15:19] [Output] : ★ Anna Pohl steps on the pedal to release the newly assembled tyre/wheel assembly
- [2019-05-26 22:15:36] [Output] : ★ Anna Pohl turns it vertical and inspects the bead of the tyre
- [2019-05-26 22:16:06] [Output] : ★ Anna Pohl sets the assembly down by the first one
- [2019-05-26 22:16:24] [Output] : Anna Pohl: (( /me refuses to write this out 2 more times, sorrow) ))
- [2019-05-26 22:17:12] [Output] : ★ there would now be four wheel and tyre assemblies with no balancing or air in them ((Anna Pohl))
- [2019-05-26 22:28:29] [Output] : ★ Anna Pohl walks up to the compressor, grabs the hose with a pump attatchment on it
- [2019-05-26 22:28:38] [Output] : ★ Anna Pohl walks back to the assembly
- [2019-05-26 22:29:21] [Output] : ★ Anna Pohl uncaps the air valve on one of the wheel assemblies and attatches the pump
- [2019-05-26 22:29:36] [Output] : ★ Anna Pohl depresses the trigger on the pump
- [2019-05-26 22:29:50] [Output] : ★ air would start rushing into the wheel/tyre assembly ((Anna Pohl))
- [2019-05-26 22:30:00] [Output] : ★ Anna Pohl would keep an eye on the gauge on the pump
- [2019-05-26 22:30:17] [Output] : ★ Anna Pohl would stop before the needle on the gauge reaches the correct pressure
- [2019-05-26 22:30:34] [Output] : ★ Anna Pohl would then repeatedly depress the trigger to get the air inside up to pressure
- [2019-05-26 22:30:54] [Output] : ★ Anna Pohl takes the pumps nozzle off the valve
- [2019-05-26 22:31:05] [Output] : ★ Anna Pohl caps the valve on the wheel
- [2019-05-26 22:31:22] [Output] : Anna Pohl: (( Again I would repeat the process 3 more times ensuring correct pressure ))
- [2019-05-26 22:31:57] [Output] : ★ there would now be 4 wheel/tyre assemblies that are balanced and filled with air next to the ((Anna Pohl))
- [2019-05-26 22:17:53] [Output] : ★ Anna Pohl takes one of the assemblies and sets it on the wheel balancer shaft of the trye changer
- [2019-05-26 22:18:15] [Output] : ★ Anna Pohl takes the lock nut and screws it onto the shaft to lock the wheel assembly onto the balancer
- [2019-05-26 22:18:36] [Output] : ★ Anna Pohl runs the assembly around a few times by hand to ensure proper seating
- [2019-05-26 22:19:11] [Output] : ★ Anna Pohl turns on the balancer DRO and lowers the safety shroud onto the wheel assembly
- [2019-05-26 22:19:29] [Output] : ★ Anna Pohl presses the button to run the balance test on the wheel
- [2019-05-26 22:20:03] [Output] : ★ the wheel would start spinning on the machine slowly, rotate a bunch of times, then come to ((Anna Pohl))
- [2019-05-26 22:20:07] [Output] : ★ a stop slowly ((Anna Pohl))
- [2019-05-26 22:20:26] [Output] : ★ the machine would beep, indicating a succsessful test ((Anna Pohl))
- [2019-05-26 22:20:40] [Output] : ★ Anna Pohl takes a a look at the DRO
- [2019-05-26 22:21:06] [Output] : [English] Anna Pohl says: Okay, 15 grams on this side and 45 on the other
- [2019-05-26 22:21:33] [Output] : ★ Anna Pohl grabs a wheel weight labelled 15 from the box atop the balancer
- [2019-05-26 22:21:50] [Output] : ★ Anna Pohl also grabs a rubber mallet that is atop the balancer
- [2019-05-26 22:22:06] [Output] : ★ Anna Pohl lifts the safety shroud and starts rotating the wheel, looking at the DRO
- [2019-05-26 22:22:27] [Output] : ★ the machine would beep indicating correcto positioning for the wheel weight ((Anna Pohl))
- 2019-05-26 22:23:36] [Output] : ★ Anna Pohl places the wheel weight on the side that needed 15 grams and gently taps it on with the
- [2019-05-26 22:23:43] [Output] : ★ rubber mallet ((Anna Pohl))
- [2019-05-26 22:24:03] [Output] : ★ Anna Pohl would then press on the button to change readout to the other side of the wheel
- [2019-05-26 22:24:28] [Output] : ★ Anna Pohl spins the assembly around again until the machine beeps indicating correct position
- [2019-05-26 22:25:02] [Output] : ★ Anna Pohl takes two weights, one 20, the other 25 and sets them onto the wheel, estimating the center
- [2019-05-26 22:25:21] [Output] : ★ Anna Pohl then taps them gently into place with the rubber mallet
- [2019-05-26 22:25:31] [Output] : ★ Anna Pohl sets down the mallet atop the balancer
- [2019-05-26 22:25:59] [Output] : ★ Anna Pohl presses a button to run the balancing test again
- [2019-05-26 22:26:27] [Output] : ★ the wheel would slowly start spinning, get up to speed, rotate a number of times, then come ((Anna Pohl))
- [2019-05-26 22:26:31] [Output] : ★ a stop slowly ((Anna Pohl))
- [2019-05-26 22:26:50] [Output] : ★ the balancer would beep to indicate a succsessful test ((Anna Pohl))
- [2019-05-26 22:26:56] [Output] : ★ Anna Pohl takes a look at the DRO
- [2019-05-26 22:27:05] [Output] : [English] Anna Pohl says: Spot on, nice!
- [2019-05-26 22:31:22] [Output] : Anna Pohl: (( Again I would repeat the process 3 more times ensuring correct pressure ))
- [2019-05-26 22:31:57] [Output] : ★ there would now be 4 wheel/tyre assemblies that are balanced and filled with air next to the ((Anna Pohl))
- [2019-05-26 22:32:00] [Output] : ★ balancer ((Anna Pohl))
- [2019-05-26 22:32:41] [Output] : ★ Anna Pohl walks up to the ae86 that would now parked between the towers of the lift
- [2019-05-26 22:33:03] [Output] : ★ Anna Pohl starts going around the car placing the four arms of the lift under the pickup points
- [2019-05-26 22:33:09] [Output] : ★ of the car ((Anna Pohl))
- [2019-05-26 22:33:30] [Output] : ★ Anna Pohl gets up and moves to the button to raise the car
- [2019-05-26 22:33:41] [Output] : ★ Anna Pohl would stop just as the arms connect with the pickup points
- [2019-05-26 22:33:56] [Output] : ★ Anna Pohl goes around the car making sure the arms connect in the right place
- [2019-05-26 22:34:19] [Output] : ★ Anna Pohl walks back to the button and raises the vehicle to hip height
- [2019-05-26 22:34:47] [Output] : ★ Anna Pohl grabs the air gun that would lie beside the lift and be connected to the compressor
- [2019-05-26 22:35:43] [Output] : ★ Anna Pohl moves to the FR wheel, places the air wrench' socket on one of the lug nuts and presses the
- [2019-05-26 22:35:54] [Output] : ★ trigger to undo the nut ((Anna Pohl))
- [2019-05-26 22:36:06] [Output] : ★ Anna Pohl would repeat the process 5 more times on the wheel
- [2019-05-26 22:36:32] [Output] : ★ Anna Pohl would repeat the general process on the 4 remaining wheels pocketing all the lug nuts
- [2019-05-26 22:36:57] [Output] : Anna Pohl: (( /me starts going around the car cautiousley removing all the wheels one by wone ))
- [2019-05-26 22:37:13] [Output] : ★ Anna Pohl starts going around the car removing all the wheels one by one
- [2019-05-26 22:37:23] [Output] : ★ setting them down by the posts of the lift ((Anna Pohl))
- [2019-05-26 22:37:39] [Output] : ★ Anna Pohl goes to the balancer and starts rolling the new wheels closer to the car
- [2019-05-26 22:37:47] [Output] : ★ Anna Pohl finishes moving the wheel assemblies
- [2019-05-26 22:38:22] [Output] : ★ Anna Pohl starts placing the wheels onto the car one after the other securing them temporarily in plac
- [2019-05-26 22:38:41] [Output] : ★ place by screwing on a few of the nuts onto the studs by hand ((Anna Pohl))
- [2019-05-26 22:39:09] [Output] : ★ Anna Pohl would then go around the car screwing on the rest of the nuts by hand
- [2019-05-26 22:39:26] [Output] : ★ Anna Pohl then reaches for her torque wrench
- [2019-05-26 22:40:24] [Output] : ★ Anna Pohl starts going around the vehicle tightening all the nuts up to spec,
- [2019-05-26 22:40:26] [Output] : ★ The torque wrench would click as it reaches set torque
- [2019-05-26 22:41:11] [Output] : ★ Anna Pohl sets down the air gun, and goes around the vehicle inspecting her work
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement