Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.1-RELEASE #2: Tue Nov 27 03:45:16 UTC 2012
- root@darkstar:/usr/obj/pcbsd-build90/fbsd-source/9.1/sys/GENERIC amd64
- CPU: AMD Phenom(tm) II X4 955 Processor (3214.31-MHz K8-class CPU)
- Origin = "AuthenticAMD" Id = 0x100f43 Family = 10 Model = 4 Stepping = 3
- Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
- Features2=0x802009<SSE3,MON,CX16,POPCNT>
- AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
- AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
- TSC: P-state invariant
- real memory = 4294967296 (4096 MB)
- avail memory = 4073431040 (3884 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <081910 APIC0916>
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- cpu2 (AP): APIC ID: 2
- cpu3 (AP): APIC ID: 3
- ioapic0 <Version 2.1> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- cryptosoft0: <software crypto> on motherboard
- aesni0: No AESNI support.
- acpi0: <081910 XSDT0916> on motherboard
- acpi0: Power Button (fixed)
- acpi0: reservation of fee00000, 1000 (3) failed
- acpi0: reservation of ffb80000, 80000 (3) failed
- acpi0: reservation of fec10000, 20 (3) failed
- acpi0: reservation of fed80000, 1000 (3) failed
- acpi0: reservation of 0, a0000 (3) failed
- acpi0: reservation of 100000, cff00000 (3) failed
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 450
- Event timer "HPET2" frequency 14318180 Hz quality 450
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 18 at device 0.0 on pci1
- nvidia0: <GeForce 9800 GT> on vgapci0
- vgapci0: child nvidia0 requested pci_enable_io
- vgapci0: child nvidia0 requested pci_enable_io
- pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- fwohci0: <1394 Open Host Controller Interface> port 0xd800-0xd8ff mem 0xfeaff800-0xfeafffff irq 17 at device 0.0 on pci2
- fwohci0: OHCI version 1.10 (ROM=1)
- fwohci0: No. of Isochronous channels is 4.
- fwohci0: EUI64 00:1e:8c:00:00:34:d6:95
- fwohci0: Phy 1394a available S400, 2 ports.
- fwohci0: Link S400, max_rec 2048 bytes.
- firewire0: <IEEE1394(FireWire) bus> on fwohci0
- dcons_crom0: <dcons configuration ROM> on firewire0
- dcons_crom0: bus_addr 0x39f4000
- fwe0: <Ethernet over FireWire> on firewire0
- if_fwe0: Fake Ethernet address: 02:1e:8c:34:d6:95
- fwe0: Ethernet address: 02:1e:8c:34:d6:95
- fwip0: <IP over FireWire> on firewire0
- fwip0: Firewire address: 00:1e:8c:00:00:34:d6:95 @ 0xfffe00000000, S400, maxrec 2048
- fwohci0: Initiate bus reset
- fwohci0: fwohci_intr_core: BUS reset
- fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
- atapci0: <VIA ATA controller> port 0xdc00-0xdc07,0xd480-0xd483,0xd400-0xd407,0xd080-0xd083,0xd000-0xd00f irq 17 at device 0.1 on pci2
- ata2: <ATA channel> at channel 0 on atapci0
- ata3: <ATA channel> at channel 1 on atapci0
- pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
- pci3: <ACPI PCI bus> on pcib3
- xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfebfa000-0xfebfbfff irq 18 at device 0.0 on pci3
- xhci0: 32 byte context size.
- usbus0 on xhci0
- ahci0: <ATI IXP700 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xf9fffc00-0xf9ffffff irq 19 at device 17.0 on pci0
- ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf9ffe000-0xf9ffefff irq 18 at device 18.0 on pci0
- usbus1 on ohci0
- ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf9fff800-0xf9fff8ff irq 17 at device 18.2 on pci0
- usbus2: EHCI version 1.0
- usbus2 on ehci0
- ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf9ffd000-0xf9ffdfff irq 18 at device 19.0 on pci0
- usbus3 on ohci1
- ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf9fff400-0xf9fff4ff irq 17 at device 19.2 on pci0
- usbus4: EHCI version 1.0
- usbus4 on ehci1
- pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
- atapci1: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
- ata0: <ATA channel> at channel 0 on atapci1
- ata1: <ATA channel> at channel 1 on atapci1
- hdac0: <ATI SB600 HDA Controller> mem 0xf9ff8000-0xf9ffbfff irq 16 at device 20.2 on pci0
- isab0: <PCI-ISA bridge> at device 20.3 on pci0
- isa0: <ISA bus> on isab0
- pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
- pci4: <ACPI PCI bus> on pcib4
- ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf9ffc000-0xf9ffcfff irq 18 at device 20.5 on pci0
- usbus5 on ohci2
- pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
- pci5: <ACPI PCI bus> on pcib5
- pcib6: <ACPI PCI-PCI bridge> at device 21.1 on pci0
- pci6: <ACPI PCI bus> on pcib6
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xf8fff000-0xf8ffffff,0xf8ff8000-0xf8ffbfff irq 17 at device 0.0 on pci6
- re0: Using 1 MSI-X message
- re0: Chip rev. 0x2c000000
- re0: MAC rev. 0x00000000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Ethernet address: 20:cf:30:e3:36:0f
- ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf9ff7000-0xf9ff7fff irq 18 at device 22.0 on pci0
- usbus6 on ohci3
- ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf9fff000-0xf9fff0ff irq 17 at device 22.2 on pci0
- usbus7: EHCI version 1.0
- usbus7 on ehci2
- acpi_button0: <Power Button> on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- ppc0: cannot reserve I/O port range
- ctl: CAM Target Layer loaded
- hwpstate0: <Cool`n'Quiet 2.0> on cpu0
- ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
- to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
- ZFS filesystem version 5
- ZFS storage pool version 28
- Timecounters tick every 1.000 msec
- vboxdrv: fAsync=0 offMin=0x231 offMax=0x495
- firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
- firewire0: bus manager 0
- hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
- hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
- pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
- pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
- pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
- pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0
- usbus0: 5.0Gbps Super Speed USB v3.0
- usbus1: 12Mbps Full Speed USB v1.0
- usbus2: 480Mbps High Speed USB v2.0
- usbus3: 12Mbps Full Speed USB v1.0
- usbus4: 480Mbps High Speed USB v2.0
- usbus5: 12Mbps Full Speed USB v1.0
- usbus6: 12Mbps Full Speed USB v1.0
- usbus7: 480Mbps High Speed USB v2.0
- ugen0.1: <0x1033> at usbus0
- uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- ugen1.1: <ATI> at usbus1
- uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ugen2.1: <ATI> at usbus2
- uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- ugen3.1: <ATI> at usbus3
- uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- ugen4.1: <ATI> at usbus4
- uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
- ugen5.1: <ATI> at usbus5
- uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
- ugen6.1: <ATI> at usbus6
- uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
- ugen7.1: <ATI> at usbus7
- uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
- uhub5: 2 ports with 2 removable, self powered
- uhub6: 4 ports with 4 removable, self powered
- uhub1: 5 ports with 5 removable, self powered
- uhub3: 5 ports with 5 removable, self powered
- uhub0: 4 ports with 4 removable, self powered
- uhub7: 4 ports with 4 removable, self powered
- uhub2: 5 ports with 5 removable, self powered
- uhub4: 5 ports with 5 removable, self powered
- ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
- ada0: <WDC WD15EARS-22MVWB0 51.0AB51> ATA-8 SATA 2.x device
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad8
- ada1 at ata0 bus 0 scbus6 target 0 lun 0
- ada1: <WDC WD15EARS-22MVWB0 51.0AB51> ATA-8 SATA 2.x device
- ada1: 150.000MB/s transfers (SATA, UDMA6, PIO 8192bytes)
- ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
- ada1: Previously was known as ad0
- ada2 at ata0 bus 0 scbus6 target 1 lun 0
- ada2: <ST3640323AS SD13> ATA-8 SATA 2.x device
- ada2: 150.000MB/s transfers (SATA, UDMA6, PIO 8192bytes)
- ada2: 610480MB (1250263728 512 byte sectors: 16H 63S/T 16383C)
- ada2: Previously was known as ad1
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #3 Launched!
- Timecounter "TSC-low" frequency 12555897 Hz quality 800
- Trying to mount root from zfs:tank1/ROOT/default []...
- ugen1.2: <Microsft> at usbus1
- ukbd0: <Microsft Microsoft Wireless Optical Desktop 2.20, class 0/0, rev 2.00/0.53, addr 2> on usbus1
- kbd2 at ukbd0
- ums0: <Microsft Microsoft Wireless Optical Desktop 2.20, class 0/0, rev 2.00/0.53, addr 2> on usbus1
- ums0: 5 buttons and [XYZT] coordinates ID=17
- ums0: 0 buttons and [ZT] coordinates ID=0
- Cuse4BSD v0.1.26 @ /dev/cuse
- ppc0: cannot reserve I/O port range
- SGI XFS with large block numbers, tracing, no debug enabled
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement