Advertisement
Guest User

Espressobin kernel panic

a guest
May 11th, 2019
187
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.25 KB | None | 0 0
  1. TIM-1.0
  2. WTMI-devel-18.12.0-a0a1cb8
  3. WTMI: system early-init
  4. CPU VDD voltage default value: 1.155V
  5. NOTICE: Booting Trusted Firmware
  6. NOTICE: BL1: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
  7. NOTICE: BL1: Built : 09:47:03, Feb 20 2019
  8. NOTICE: BL1: Booting BL2
  9. NOTICE: BL2: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
  10. NOTICE: BL2: Built : 09:47:04, Feb 20 2019
  11. NOTICE: BL1: Booting BL31
  12. NOTICE: BL31: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
  13. NOTICE: BL31: Built : 09:4
  14.  
  15. U-Boot 2018.03-devel-18.12.3-gc9aa92c-armbian (Feb 20 2019 - 09:45:04 +0100)
  16.  
  17. Model: Marvell Armada 3720 Community Board ESPRESSOBin
  18. CPU 1000 [MHz]
  19. L2 800 [MHz]
  20. TClock 200 [MHz]
  21. DDR 800 [MHz]
  22. DRAM: 1 GiB
  23. Comphy chip #0:
  24. Comphy-0: USB3 5 Gbps
  25. Comphy-1: PEX0 2.5 Gbps
  26. Comphy-2: SATA0 6 Gbps
  27. Target spinup took 0 ms.
  28. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  29. flags: ncq led only pmp fbss pio slum part sxs
  30. PCIE-0: Link down
  31. MMC: sdhci@d0000: 0, sdhci@d8000: 1
  32. Loading Environment from SPI Flash... SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  33. OK
  34. Model: Marvell Armada 3720 Community Board ESPRESSOBin
  35. Net: eth0: neta@30000 [PRIME]
  36. Hit any key to stop autoboot: 0
  37. Marvell>> run bootcmd
  38. scanning bus for devices...
  39. Device 0: (0:0) Vendor: ATA Prod.: Samsung SSD 860 Rev: RVT0
  40. Type: Hard Disk
  41. Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
  42.  
  43. Device 0: (0:0) Vendor: ATA Prod.: Samsung SSD 860 Rev: RVT0
  44. Type: Hard Disk
  45. Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
  46. ... is now current device
  47. /
  48. ** File not found /boot.scr **
  49. ## Executing script at 06d00000
  50. Wrong image format for "source" command
  51. /boot/
  52. 1115 bytes read in 5 ms (217.8 KiB/s)
  53. ## Executing script at 06d00000
  54. 221 bytes read in 2 ms (107.4 KiB/s)
  55. 16488960 bytes read in 271 ms (58 MiB/s)
  56. 4692707 bytes read in 79 ms (56.6 MiB/s)
  57. ** File not found /boot/dtb/marvell/armada-3720-community.dtb **
  58. 8942 bytes read in 3 ms (2.8 MiB/s)
  59. ## Loading init Ramdisk from Legacy Image at 01100000 ...
  60. Image Name: uInitrd
  61. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  62. Data Size: 4692643 Bytes = 4.5 MiB
  63. Load Address: 00000000
  64. Entry Point: 00000000
  65. Verifying Checksum ... OK
  66. ## Flattened Device Tree blob at 06000000
  67. Booting using the fdt blob at 0x6000000
  68. Loading Ramdisk to 3f1b1000, end 3f62aaa3 ... OK
  69. Using Device Tree in place at 0000000006000000, end 00000000060052ed
  70.  
  71. Starting kernel ...
  72.  
  73. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  74. [ 0.000000] Linux version 4.19.41-mvebu64 (root@armbian.com) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #5.84 SMP 9
  75. [ 0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board
  76. [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
  77. [ 0.000000] bootconsole [ar3700_uart0] enabled
  78. Loading, please wait...
  79. starting version 232
  80. Begin: Loading essential drivers ... done.
  81. Begin: Running /scripts/init-premount ... done.
  82. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  83. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  84. done.
  85. Begin: Will now check root file system ... fsck from util-linux 2.29.2
  86. [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
  87. /dev/sda1: clean, 170217/60440576 files, 49320047/241747712 blocks
  88. done.
  89. done.
  90. Begin: Running /scripts/local-bottom ... done.
  91. Begin: Running /scripts/init-bottom ... done.
  92.  
  93. Welcome to Debian GNU/Linux 9 (stretch)!
  94.  
  95. [ OK ] Created slice System Slice.
  96. [ OK ] Listening on Journal Socket (/dev/log).
  97. Mounting POSIX Message Queue File System...
  98. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  99. [ OK ] Listening on udev Control Socket.
  100. [ OK ] Listening on fsck to fsckd communication Socket.
  101. Mounting Huge Pages File System...
  102. [ OK ] Created slice User and Session Slice.
  103. Mounting Debug File System...
  104. [ OK ] Listening on Syslog Socket.
  105. [ OK ] Listening on Journal Audit Socket.
  106. [ OK ] Listening on RPCbind Server Activation Socket.
  107. [ OK ] Created slice system-serial\x2dgetty.slice.
  108. [ OK ] Created slice system-getty.slice.
  109. [ OK ] Listening on Journal Socket.
  110. Starting Set the console keyboard layout...
  111. Starting Remount Root and Kernel File Systems...
  112. Starting Journal Service...
  113. Starting Restore / save the current clock...
  114. [ OK ] Listening on udev Kernel Socket.
  115. [ OK ] Reached target Slices.
  116. Starting Load Kernel Modules...
  117. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  118. Starting Create list of required st?.|ce nodes for the current kernel...
  119. [ OK ] Listening on Network Service Netlink Socket.
  120. Starting Nameserver information manager...
  121. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  122. [ OK ] Reached target Encrypted Volumes.
  123. [ OK ] Reached target Paths.
  124. [ OK ] Mounted POSIX Message Queue File System.
  125. [ OK ] Mounted Huge Pages File System.
  126. [ OK ] Mounted Debug File System.
  127. [ OK ] Started Journal Service.
  128. [ OK ] Started Remount Root and Kernel File Systems.
  129. [ OK ] Started Restore / save the current clock.
  130. [ OK ] Started Load Kernel Modules.
  131. [ OK ] Started Create list of required sta?.|vice nodes for the current kernel.
  132. [ OK ] Started Nameserver information manager.
  133. Starting Create Static Device Nodes in /dev...
  134. Mounting Configuration File System...
  135. Starting Apply Kernel Variables...
  136. Starting udev Coldplug all Devices...
  137. Activating swap /var/swap...
  138. Starting Load/Save Random Seed...
  139. Starting Flush Journal to Persistent Storage...
  140. [ OK ] Mounted Configuration File System.
  141. [ OK ] Started Create Static Device Nodes in /dev.
  142. [ OK ] Started Apply Kernel Variables.
  143. [FAILED] Failed to activate swap /var/swap.
  144. See 'systemctl status var-swap.swap' for details.
  145. [DEPEND] Dependency failed for Swap.
  146. [ OK ] Started Set the console keyboard layout.
  147. [ OK ] Started Load/Save Random Seed.
  148. Starting udev Kernel Device Manager...
  149. [ OK ] Reached target Local File Systems (Pre).
  150. Mounting /tmp...
  151. [ OK ] Mounted /tmp.
  152. [ OK ] Started Flush Journal to Persistent Storage.
  153. [ OK ] Started udev Kernel Device Manager.
  154. [ OK ] Started udev Coldplug all Devices.
  155. Starting Network Service...
  156. [ OK ] Reached target Local File Systems.
  157. Starting Raise network interfaces...
  158. Starting Set console font and keymap...
  159. Starting Create Volatile Files and Directories...
  160. Starting Armbian ZRAM config...
  161. [ OK ] Started Set console font and keymap.
  162. [ OK ] Started Create Volatile Files and Directories.
  163. [ OK ] Reached target System Time Synchronized.
  164. Starting Update UTMP about System Boot/Shutdown...
  165. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  166. Starting RPC bind portmap service...
  167. [ OK ] Started Network Service.
  168. [ OK ] Started Update UTMP about System Boot/Shutdown.
  169. [ OK ] Started RPC bind portmap service.
  170. [ OK ] Reached target Remote File Systems (Pre).
  171. [ OK ] Reached target Remote File Systems.
  172. [ OK ] Reached target RPC Port Mapper.
  173. [ OK ] Started Raise network interfaces.
  174. [ OK ] Reached target Network.
  175. [ OK ] Found device /dev/ttyMV0.
  176. [ OK ] Started Armbian ZRAM config.
  177. Starting Armbian memory supported logging...
  178. [ OK ] Started Armbian memory supported logging.
  179. [ OK ] Reached target System Initialization.
  180. [ 10.240753] Internal error: synchronous parity or ECC error: 86000018 [#1] PREEMPT SMP
  181. [ 10.246061] Modules linked in: zstd zram zsmalloc bridge stp llc crypto_safexcel des_generic authenc ip_tables x_tables mv88e6xxx dsa_core
  182. [ 10.258874] Process P? (pid: -1840721312, stack limit = 0x000000002a2f87c3)
  183. [ 10.266044] CPU: 0 PID: -1840721312 Comm: P? Not tainted 4.19.41-mvebu64 #5.84
  184. [ 10.273475] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
  185. [ 10.280107] pstate: 400003c5 (nZcv DAIF -PAN -UAO)
  186. [ 10.285044] pc : finish_ret_to_user+0xb8/0xf8
  187. [ 10.289515] lr : 0xffffffbefe7fc000
  188. [ 10.293097] sp : ffffff8008034000
  189. [ 10.296501] x29: 0000007fd37f70e0 x28: 0000000000000040
  190. [ 10.301967] x27: 0000007f998cf000 x26: 0000007fd37f7228
  191. [ 10.307433] x25: 0000000000000050 x24: 0000007f99505998
  192. [ 10.312898] x23: 0000000000000082 x22: 0000000000000090
  193. [ 10.318364] x21: 0000000000000082 x20: 0000005592524cb0
  194. [ 10.323829] x19: 0000005592524cc0 x18: 0000000000000000
  195. [ 10.329295] x17: 0000007f99435220 x16: 0000007f998cf938
  196. [ 10.334760] x15: 0000000000000001 x14: 0000000000000003
  197. [ 10.340226] x13: 0000000000000000 x12: 0000000000000000
  198. [ 10.345691] x11: 0000000000000020 x10: 0000000000000000
  199. [ 10.351158] x9 : ffffff80ffffffe0 x8 : 000000000000003f
  200. [ 10.356623] x7 : 0000000000000411 x6 : 0000007fd37f6f7c
  201. [ 10.362089] x5 : 0000000000000000 x4 : 0000005592499bc0
  202. [ 10.367554] x3 : 0000000000000090 x2 : 0000000000000050
  203. [ 10.373019] x1 : 0000005592524cb0 x0 : 0000007f99505998
  204. [ 10.378485] Call trace:
  205. [ 10.380999] Code: d518601e 92c0083e f2bfcffe f298001e (911f23de)
  206. [ 10.387275] ---[ end trace 92caf0bd9a930370 ]---
  207. [ 10.392017] Kernel panic - not syncing: Fatal exception in interrupt
  208. [ 10.398557] SMP: stopping secondary CPUs
  209. [ 10.402591] Kernel Offset: disabled
  210. [ 10.406174] CPU features: 0x0,2080200c
  211. [ 10.410024] Memory Limit: none
  212. [ 10.413164] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
  213. [ 10.421000] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
  214. [ 10.430005] Mem abort info:
  215. [ 10.432872] ESR = 0x96000005
  216. [ 10.436010] Exception class = DABT (current EL), IL = 32 bits
  217. [ 10.442101] SET = 0, FnV = 0
  218. [ 10.445237] EA = 0, S1PTW = 0
  219. [ 10.448463] Data abort info:
  220. [ 10.451419] ISV = 0, ISS = 0x00000005
  221. [ 10.455362] CM = 0, WnR = 0
  222. [ 10.458411] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  223. [ 10.467457] Mem abort info:
  224. [ 10.470326] ESR = 0x96000005
  225. [ 10.473462] Exception class = DABT (current EL), IL = 32 bits
  226. [ 10.479554] SET = 0, FnV = 0
  227. [ 10.482690] EA = 0, S1PTW = 0
  228. [ 10.485915] Data abort info:
  229. [ 10.488873] ISV = 0, ISS = 0x00000005
  230. [ 10.492815] CM = 0, WnR = 0
  231. [ 10.495862] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  232. [ 10.504911] Mem abort info:
  233. [ 10.507778] ESR = 0x96000005
  234. [ 10.510914] Exception class = DABT (current EL), IL = 32 bits
  235. [ 10.517006] SET = 0, FnV = 0
  236. [ 10.520143] EA = 0, S1PTW = 0
  237. [ 10.523368] Data abort info:
  238. [ 10.526325] ISV = 0, ISS = 0x00000005
  239. [ 10.530268] CM = 0, WnR = 0
  240. [ 10.533316] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  241. [ 10.542363] Mem abort info:
  242. [ 10.545231] ESR = 0x96000005
  243. [ 10.548367] Exception class = DABT (current EL), IL = 32 bits
  244. [ 10.554460] SET = 0, FnV = 0
  245. [ 10.557596] EA = 0, S1PTW = 0
  246. [ 10.560821] Data abort info:
  247. [ 10.563777] ISV = 0, ISS = 0x00000005
  248. [ 10.567720] CM = 0, WnR = 0
  249. [ 10.570768] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  250. [ 10.579816] Mem abort info:
  251. [ 10.582684] ESR = 0x96000005
  252. [ 10.585820] Exception class = DABT (current EL), IL = 32 bits
  253. [ 10.591912] SET = 0, FnV = 0
  254. [ 10.595048] EA = 0, S1PTW = 0
  255. [ 10.598273] Data abort info:
  256. [ 10.601231] ISV = 0, ISS = 0x00000005
  257. [ 10.605173] CM = 0, WnR = 0
  258. [ 10.608221] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  259. [ 10.617269] Mem abort info:
  260. [ 10.620137] ESR = 0x96000005
  261. [ 10.623273] Exception class = DABT (current EL), IL = 32 bits
  262. [ 10.629365] SET = 0, FnV = 0
  263. [ 10.632501] EA = 0, S1PTW = 0
  264. [ 10.635726] Data abort info:
  265. [ 10.638684] ISV = 0, ISS = 0x00000005
  266. [ 10.642626] CM = 0, WnR = 0
  267. [ 10.645674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  268. [ 10.654722] Mem abort info:
  269. [ 10.657590] ESR = 0x96000005
  270. [ 10.660726] Exception class = DABT (current EL), IL = 32 bits
  271. [ 10.666818] SET = 0, FnV = 0
  272. [ 10.669954] EA = 0, S1PTW = 0
  273. [ 10.673179] Data abort info:
  274. [ 10.676137] ISV = 0, ISS = 0x00000005
  275. [ 10.680079] CM = 0, WnR = 0
  276. [ 10.683127] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  277. [ 10.692175] Mem abort info:
  278. [ 10.695041] ESR = 0x96000005
  279. [ 10.698179] Exception class = DABT (current EL), IL = 32 bits
  280. [ 10.704271] SET = 0, FnV = 0
  281. [ 10.707407] EA = 0, S1PTW = 0
  282. [ 10.710632] Data abort info:
  283. [ 10.713590] ISV = 0, ISS = 0x00000005
  284. [ 10.717532] CM = 0, WnR = 0
  285. [ 10.720579] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  286. [ 10.729628] Mem abort info:
  287. [ 10.732494] ESR = 0x96000005
  288. [ 10.735632] Exception class = DABT (current EL), IL = 32 bits
  289. [ 10.741724] SET = 0, FnV = 0
  290. [ 10.744860] EA = 0, S1PTW = 0
  291. [ 10.748084] Data abort info:
  292. [ 10.751042] ISV = 0, ISS = 0x00000005
  293. [ 10.754984] CM = 0, WnR = 0
  294. [ 10.758032] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  295. [ 10.767080] Mem abort info:
  296. [ 10.769948] ESR = 0x96000005
  297. [ 10.773084] Exception class = DABT (current EL), IL = 32 bits
  298. [ 10.779176] SET = 0, FnV = 0
  299. [ 10.782312] EA = 0, S1PTW = 0
  300. [ 10.785538] Data abort info:
  301. [ 10.788495] ISV = 0, ISS = 0x00000005
  302. [ 10.792438] CM = 0, WnR = 0
  303. [ 10.795486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  304. [ 10.804533] Mem abort info:
  305. [ 10.807400] ESR = 0x96000005
  306. [ 10.810537] Exception class = DABT (current EL), IL = 32 bits
  307. [ 10.816630] SET = 0, FnV = 0
  308. [ 10.819765] EA = 0, S1PTW = 0
  309. [ 10.822991] Data abort info:
  310. [ 10.825947] ISV = 0, ISS = 0x00000005
  311. [ 10.829890] CM = 0, WnR = 0
  312. [ 10.832938] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  313. [ 10.841985] Mem abort info:
  314. [ 10.844853] ESR = 0x96000005
  315. [ 10.847989] Exception class = DABT (current EL), IL = 32 bits
  316. [ 10.854082] SET = 0, FnV = 0
  317. [ 10.857218] EA = 0, S1PTW = 0
  318. [ 10.860443] Data abort info:
  319. [ 10.863400] ISV = 0, ISS = 0x00000005
  320. [ 10.867343] CM = 0, WnR = 0
  321. [ 10.870391] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
  322. [ 10.879438] Mem abort info:
  323. [ 10.882306] ESR = 0x96000005
  324. [ 10.885442] Exception class = DABT (current EL), IL = 32 bits
  325. [ 10.891535] SET = 0, FnV = 0
  326. [ 10.894670] EA = 0, S1PTW = 0
  327. [ 10.897896] Data abort info:
  328. [ 10.900853] ISV = 0, ISS = 0x00000005
  329. [ 10.904796] CM = 0, WnR = 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement