Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- francis@berlioz:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-24-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38-Ubuntu SMP Tue May 1 16:18:50 U
- TC 2012 (Ubuntu 3.2.0-24.38-generic 3.2.16)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=f7005cee-4159-4061-aed9-488ac44f8679 ro quiet splash vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bbf90000 (usable)
- [ 0.000000] BIOS-e820: 00000000bbf90000 - 00000000bbf9e000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000bbf9e000 - 00000000bbfe0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bbfe0000 - 00000000bc000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000200000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1004 01/22/2007
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x200000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0BFE00000 mask FFFE00000 uncachable
- [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
- [ 0.000000] 2 base 000000000 mask E00000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 3070MB, range: 2MB, type UC
- [ 0.000000] reg 1, base: 3GB, range: 1GB, type UC
- [ 0.000000] reg 2, base: 0GB, range: 8GB, type WB
- [ 0.000000] total RAM covered: 7166M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
- [ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC
- [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
- [ 0.000000] e820 update range: 00000000bfe00000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xbbf90 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000bbf90000
- [ 0.000000] 0000000000 - 00bbe00000 page 2M
- [ 0.000000] 00bbe00000 - 00bbf90000 page 4k
- [ 0.000000] kernel direct mapping tables up to bbf90000 @ 1fffb000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000200000000
- [ 0.000000] 0100000000 - 0200000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 200000000 @ bbf87000-bbf90000
- [ 0.000000] RAMDISK: 3574a000 - 36b9d000
- [ 0.000000] ACPI: RSDP 00000000000fae40 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 00000000bbf90000 0003C (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xfff
- fffff\xffffffff\xffffffff\xffffffff\xffffffff 01000722 MSFT 00000097)
- [ 0.000000] ACPI: FACP 00000000bbf90200 00084 (v02 MSTEST OEMFACP 01000722 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 00000000bbf905c0 08E7D (v01 A0483 A0483035 00000035 INTL 20060113)
- [ 0.000000] ACPI: FACS 00000000bbf9e000 00040
- [ 0.000000] ACPI: APIC 00000000bbf90390 0006C (v01 MSTEST OEMAPIC 01000722 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 00000000bbf90400 0003C (v01 MSTEST OEMMCFG 01000722 MSFT 00000097)
- [ 0.000000] ACPI: SLIC 00000000bbf90440 00176 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xfff
- fffff\xffffffff\xffffffff\xffffffff\xffffffff 01000722 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 00000000bbf9e040 0007B (v01 MSTEST AMI_OEM 01000722 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000bbf99440 00038 (v01 MSTEST OEMHPET 01000722 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000200000000
- [ 0.000000] Initmem setup node 0 0000000000000000-0000000200000000
- [ 0.000000] NODE_DATA [00000001ffffb000 - 00000001ffffffff]
- [ 0.000000] [ffffea0000000000-ffffea0007ffffff] PMD -> [ffff8801f8600000-ffff8801ff5fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00200000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000bbf90
- [ 0.000000] 0: 0x00100000 -> 0x00200000
- [ 0.000000] On node 0 totalpages: 1818399
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 16320 pages used for memmap
- [ 0.000000] DMA32 zone: 749520 pages, LIFO batch:31
- [ 0.000000] Normal zone: 16384 pages used for memmap
- [ 0.000000] Normal zone: 1032192 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000bbf90000 - 00000000bbf9e000
- [ 0.000000] PM: Registered nosave memory: 00000000bbf9e000 - 00000000bbfe0000
- [ 0.000000] PM: Registered nosave memory: 00000000bbfe0000 - 00000000bc000000
- [ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at bc000000 (gap: bc000000:42e00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801ffc00000 s83072 r8192 d23424 u524288
- [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1785626
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=f7005cee-4159-4061-aed9-488ac44f8679 ro quiet splash vt.handof
- f=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 7055752k/8388608k available (6567k kernel code, 1115012k absent, 217844k reserved, 6636k data, 920k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16640 nr_irqs:712 16
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 58720256 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2933.419 MHz processor.
- [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.83 BogoMIPS (lpj=11733676)
- [ 0.004007] pid_max: default: 32768 minimum: 301
- [ 0.004030] Security Framework initialized
- [ 0.004045] AppArmor: AppArmor initialized
- [ 0.004047] Yama: becoming mindful.
- [ 0.004697] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.011418] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.013107] Mount-cache hash table entries: 256
- [ 0.013248] Initializing cgroup subsys cpuacct
- [ 0.013253] Initializing cgroup subsys memory
- [ 0.013262] Initializing cgroup subsys devices
- [ 0.013263] Initializing cgroup subsys freezer
- [ 0.013265] Initializing cgroup subsys blkio
- [ 0.013271] Initializing cgroup subsys perf_event
- [ 0.013299] CPU: Physical Processor ID: 0
- [ 0.013300] CPU: Processor Core ID: 0
- [ 0.013302] mce: CPU supports 6 MCE banks
- [ 0.013310] CPU0: Thermal monitoring enabled (TM2)
- [ 0.013313] using mwait in idle threads.
- [ 0.015333] ACPI: Core revision 20110623
- [ 0.020032] ftrace: allocating 27050 entries in 107 pages
- [ 0.024398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.065529] CPU0: Intel(R) Core(TM)2 CPU X6800 @ 2.93GHz stepping 06
- [ 0.068003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
- [ 0.068003] PEBS disabled due to CPU errata.
- [ 0.068003] ... version: 2
- [ 0.068003] ... bit width: 40
- [ 0.068003] ... generic registers: 2
- [ 0.068003] ... value mask: 000000ffffffffff
- [ 0.068003] ... max period: 000000007fffffff
- [ 0.068003] ... fixed-purpose events: 3
- [ 0.068003] ... event mask: 0000000700000003
- [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.068003] Booting Node 0, Processors #1
- [ 0.068003] smpboot cpu 1: start_ip = 9a000
- [ 0.156036] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.156075] Brought up 2 CPUs
- [ 0.156077] Total of 2 processors activated (11733.41 BogoMIPS).
- [ 0.157660] devtmpfs: initialized
- [ 0.157660] EVM: security.selinux
- [ 0.157660] EVM: security.SMACK64
- [ 0.157660] EVM: security.capability
- [ 0.157660] PM: Registering ACPI NVS region at bbf9e000 (270336 bytes)
- [ 0.157660] print_constraints: dummy:
- [ 0.157660] RTC time: 15:06:20, date: 05/03/12
- [ 0.157660] NET: Registered protocol family 16
- [ 0.160041] Trying to unpack rootfs image as initramfs...
- [ 0.160047] ACPI: bus type pci registered
- [ 0.160099] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.160101] PCI: not using MMCONFIG
- [ 0.160103] PCI: Using configuration type 1 for base access
- [ 0.160995] bio: create slab <bio-0> at 0
- [ 0.161062] ACPI: Added _OSI(Module Device)
- [ 0.161064] ACPI: Added _OSI(Processor Device)
- [ 0.161066] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.161068] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.162054] ACPI: EC: Look up EC in DSDT
- [ 0.163087] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.165863] ACPI: SSDT 00000000bbf9e0c0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 0.166110] ACPI: Dynamic OEM Table Load:
- [ 0.166112] ACPI: SSDT (null) 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 0.166227] ACPI: SSDT 00000000bbf9e2d0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 0.166471] ACPI: Dynamic OEM Table Load:
- [ 0.166474] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 0.166594] ACPI: Interpreter enabled
- [ 0.166598] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.166612] ACPI: Using IOAPIC for interrupt routing
- [ 0.166631] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.166959] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.205707] ACPI: No dock devices found.
- [ 0.205710] HEST: Table not found.
- [ 0.205713] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.205764] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.205867] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.205869] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.205871] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.205873] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
- [ 0.205875] pci_root PNP0A08:00: host bridge window [mem 0xbc000000-0xffffffff] (ignored)
- [ 0.205885] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
- [ 0.205927] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
- [ 0.205961] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.205964] pci 0000:00:01.0: PME# disabled
- [ 0.205995] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
- [ 0.206029] pci 0000:00:1a.0: reg 20: [io 0xdc00-0xdc1f]
- [ 0.206057] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
- [ 0.206092] pci 0000:00:1a.1: reg 20: [io 0xe000-0xe01f]
- [ 0.206131] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
- [ 0.206148] pci 0000:00:1a.7: reg 10: [mem 0xfebffc00-0xfebfffff]
- [ 0.206220] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.206224] pci 0000:00:1a.7: PME# disabled
- [ 0.206243] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
- [ 0.206256] pci 0000:00:1b.0: reg 10: [mem 0xfebf8000-0xfebfbfff 64bit]
- [ 0.206317] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.206320] pci 0000:00:1b.0: PME# disabled
- [ 0.206337] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
- [ 0.206397] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.206400] pci 0000:00:1c.0: PME# disabled
- [ 0.206421] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
- [ 0.206484] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.206488] pci 0000:00:1c.4: PME# disabled
- [ 0.206506] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
- [ 0.206568] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.206571] pci 0000:00:1c.5: PME# disabled
- [ 0.206589] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
- [ 0.206624] pci 0000:00:1d.0: reg 20: [io 0xd480-0xd49f]
- [ 0.206651] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
- [ 0.206685] pci 0000:00:1d.1: reg 20: [io 0xd800-0xd81f]
- [ 0.206712] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
- [ 0.206749] pci 0000:00:1d.2: reg 20: [io 0xd880-0xd89f]
- [ 0.206786] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
- [ 0.206802] pci 0000:00:1d.7: reg 10: [mem 0xfebff800-0xfebffbff]
- [ 0.206876] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.206880] pci 0000:00:1d.7: PME# disabled
- [ 0.206895] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- [ 0.206949] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
- [ 0.207022] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
- [ 0.207065] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
- [ 0.207076] pci 0000:00:1f.2: reg 10: [io 0xec00-0xec07]
- [ 0.207083] pci 0000:00:1f.2: reg 14: [io 0xe880-0xe883]
- [ 0.207091] pci 0000:00:1f.2: reg 18: [io 0xe800-0xe807]
- [ 0.207098] pci 0000:00:1f.2: reg 1c: [io 0xe480-0xe483]
- [ 0.207105] pci 0000:00:1f.2: reg 20: [io 0xe400-0xe40f]
- [ 0.207112] pci 0000:00:1f.2: reg 24: [io 0xe080-0xe08f]
- [ 0.207136] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.207139] pci 0000:00:1f.2: PME# disabled
- [ 0.207149] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
- [ 0.207159] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
- [ 0.207183] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
- [ 0.207211] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
- [ 0.207223] pci 0000:00:1f.5: reg 10: [io 0xd400-0xd407]
- [ 0.207231] pci 0000:00:1f.5: reg 14: [io 0xd080-0xd083]
- [ 0.207238] pci 0000:00:1f.5: reg 18: [io 0xd000-0xd007]
- [ 0.207245] pci 0000:00:1f.5: reg 1c: [io 0xcc00-0xcc03]
- [ 0.207252] pci 0000:00:1f.5: reg 20: [io 0xc880-0xc88f]
- [ 0.207259] pci 0000:00:1f.5: reg 24: [io 0xc800-0xc80f]
- [ 0.207284] pci 0000:00:1f.5: PME# supported from D3hot
- [ 0.207287] pci 0000:00:1f.5: PME# disabled
- [ 0.207323] pci 0000:01:00.0: [10de:01df] type 0 class 0x000300
- [ 0.207331] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
- [ 0.207340] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.207349] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
- [ 0.207360] pci 0000:01:00.0: reg 30: [mem 0xfe7e0000-0xfe7fffff pref]
- [ 0.207393] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.207400] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.207403] pci 0000:00:01.0: bridge window [mem 0xfa700000-0xfe7fffff]
- [ 0.207407] pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfdfffff 64bit pref]
- [ 0.207442] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
- [ 0.207450] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
- [ 0.207501] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
- [ 0.207583] pci 0000:03:00.0: reg 24: [mem 0xfe9fe000-0xfe9fffff]
- [ 0.207596] pci 0000:03:00.0: reg 30: [mem 0xfe9e0000-0xfe9effff pref]
- [ 0.207644] pci 0000:03:00.0: PME# supported from D3hot
- [ 0.207649] pci 0000:03:00.0: PME# disabled
- [ 0.207678] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
- [ 0.207700] pci 0000:03:00.1: reg 10: [io 0xac00-0xac07]
- [ 0.207713] pci 0000:03:00.1: reg 14: [io 0xa880-0xa883]
- [ 0.207725] pci 0000:03:00.1: reg 18: [io 0xa800-0xa807]
- [ 0.207738] pci 0000:03:00.1: reg 1c: [io 0xa480-0xa483]
- [ 0.207751] pci 0000:03:00.1: reg 20: [io 0xa400-0xa40f]
- [ 0.207829] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.207841] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
- [ 0.207845] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
- [ 0.207848] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.207907] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
- [ 0.207928] pci 0000:02:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
- [ 0.207939] pci 0000:02:00.0: reg 18: [io 0x9800-0x98ff]
- [ 0.207979] pci 0000:02:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
- [ 0.208047] pci 0000:02:00.0: supports D1 D2
- [ 0.208049] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.208054] pci 0000:02:00.0: PME# disabled
- [ 0.216033] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
- [ 0.216037] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
- [ 0.216040] pci 0000:00:1c.5: bridge window [mem 0xfe800000-0xfe8fffff]
- [ 0.216078] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
- [ 0.216094] pci 0000:05:03.0: reg 10: [mem 0xfeaff800-0xfeafffff]
- [ 0.216103] pci 0000:05:03.0: reg 14: [mem 0xfeaf8000-0xfeafbfff]
- [ 0.216168] pci 0000:05:03.0: supports D1 D2
- [ 0.216170] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
- [ 0.216174] pci 0000:05:03.0: PME# disabled
- [ 0.216194] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
- [ 0.216213] pci 0000:05:04.0: reg 10: [mem 0xfeaf4000-0xfeaf7fff]
- [ 0.216223] pci 0000:05:04.0: reg 14: [io 0xb800-0xb8ff]
- [ 0.216262] pci 0000:05:04.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
- [ 0.216295] pci 0000:05:04.0: supports D1 D2
- [ 0.216297] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.216300] pci 0000:05:04.0: PME# disabled
- [ 0.216337] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
- [ 0.216340] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- [ 0.216344] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.216349] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.216351] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
- [ 0.216373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.216458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
- [ 0.216479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.216537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
- [ 0.216563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
- [ 0.216595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
- [ 0.216631] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.216634] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 0.216635] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.221752] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.221791] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.221827] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.221862] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- [ 0.221898] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.221937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
- [ 0.221974] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.222010] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.222117] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.222121] vgaarb: loaded
- [ 0.222122] vgaarb: bridge control possible 0000:01:00.0
- [ 0.222218] i2c-core: driver [aat2870] using legacy suspend method
- [ 0.222219] i2c-core: driver [aat2870] using legacy resume method
- [ 0.222276] SCSI subsystem initialized
- [ 0.222333] libata version 3.00 loaded.
- [ 0.222378] usbcore: registered new interface driver usbfs
- [ 0.222388] usbcore: registered new interface driver hub
- [ 0.222411] usbcore: registered new device driver usb
- [ 0.222487] PCI: Using ACPI for IRQ routing
- [ 0.227757] PCI: pci_cache_line_size set to 64 bytes
- [ 0.227840] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- [ 0.227842] reserve RAM buffer: 00000000bbf90000 - 00000000bbffffff
- [ 0.227942] NetLabel: Initializing
- [ 0.227944] NetLabel: domain hash size = 128
- [ 0.227945] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.227955] NetLabel: unlabeled traffic allowed by default
- [ 0.228004] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.228009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.228018] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.232064] Switching to clocksource hpet
- [ 0.238631] AppArmor: AppArmor Filesystem Enabled
- [ 0.238660] pnp: PnP ACPI init
- [ 0.238675] ACPI: bus type pnp registered
- [ 0.238759] pnp 00:00: [bus 00-ff]
- [ 0.238761] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.238763] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.238765] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.238767] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.238768] pnp 00:00: [mem 0x000d0000-0x000dffff window]
- [ 0.238770] pnp 00:00: [mem 0xbc000000-0xffffffff window]
- [ 0.238832] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.238840] pnp 00:01: [mem 0xfed14000-0xfed19fff]
- [ 0.238890] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
- [ 0.238893] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.238920] pnp 00:02: [dma 4]
- [ 0.238922] pnp 00:02: [io 0x0000-0x000f]
- [ 0.238924] pnp 00:02: [io 0x0081-0x0083]
- [ 0.238925] pnp 00:02: [io 0x0087]
- [ 0.238927] pnp 00:02: [io 0x0089-0x008b]
- [ 0.238928] pnp 00:02: [io 0x008f]
- [ 0.238930] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.238953] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.238961] pnp 00:03: [io 0x0070-0x0071]
- [ 0.238972] pnp 00:03: [irq 8]
- [ 0.238994] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.239001] pnp 00:04: [io 0x0061]
- [ 0.239023] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.239030] pnp 00:05: [io 0x00f0-0x00ff]
- [ 0.239034] pnp 00:05: [irq 13]
- [ 0.239054] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.239231] pnp 00:06: [irq 4]
- [ 0.239233] pnp 00:06: [dma 0 disabled]
- [ 0.239235] pnp 00:06: [io 0x03f8-0x03ff]
- [ 0.239294] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.239488] pnp 00:07: [irq 6]
- [ 0.239490] pnp 00:07: [dma 2]
- [ 0.239491] pnp 00:07: [io 0x03f0-0x03f5]
- [ 0.239493] pnp 00:07: [io 0x03f7]
- [ 0.239537] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.239559] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.239561] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.239563] pnp 00:08: [io 0x0290-0x0297]
- [ 0.239602] system 00:08: [io 0x0290-0x0297] has been reserved
- [ 0.239605] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.239675] pnp 00:09: [io 0x0010-0x001f]
- [ 0.239677] pnp 00:09: [io 0x0022-0x003f]
- [ 0.239679] pnp 00:09: [io 0x0044-0x005f]
- [ 0.239680] pnp 00:09: [io 0x0062-0x0063]
- [ 0.239682] pnp 00:09: [io 0x0065-0x006f]
- [ 0.239683] pnp 00:09: [io 0x0072-0x007f]
- [ 0.239685] pnp 00:09: [io 0x0080]
- [ 0.239686] pnp 00:09: [io 0x0084-0x0086]
- [ 0.239687] pnp 00:09: [io 0x0088]
- [ 0.239691] pnp 00:09: [io 0x008c-0x008e]
- [ 0.239693] pnp 00:09: [io 0x0090-0x009f]
- [ 0.239694] pnp 00:09: [io 0x00a2-0x00bf]
- [ 0.239696] pnp 00:09: [io 0x00e0-0x00ef]
- [ 0.239697] pnp 00:09: [io 0x04d0-0x04d1]
- [ 0.239699] pnp 00:09: [io 0x0800-0x087f]
- [ 0.239700] pnp 00:09: [io 0x0400-0x03ff disabled]
- [ 0.239702] pnp 00:09: [io 0x0480-0x04bf]
- [ 0.239703] pnp 00:09: [mem 0xffafe000-0xffb0cbff]
- [ 0.239705] pnp 00:09: [mem 0xffb00000-0xffbfffff]
- [ 0.239706] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
- [ 0.239708] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
- [ 0.239709] pnp 00:09: [mem 0xfff00000-0xfffffffe]
- [ 0.239711] pnp 00:09: [mem 0xfebfe000-0xfebfec00]
- [ 0.239768] system 00:09: [io 0x04d0-0x04d1] has been reserved
- [ 0.239770] system 00:09: [io 0x0800-0x087f] has been reserved
- [ 0.239772] system 00:09: [io 0x0480-0x04bf] has been reserved
- [ 0.239775] system 00:09: [mem 0xffafe000-0xffb0cbff] could not be reserved
- [ 0.239777] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
- [ 0.239779] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.239781] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
- [ 0.239783] system 00:09: [mem 0xfff00000-0xfffffffe] has been reserved
- [ 0.239785] system 00:09: [mem 0xfebfe000-0xfebfec00] has been reserved
- [ 0.239788] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.239835] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
- [ 0.239862] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.239896] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
- [ 0.239898] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
- [ 0.239937] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.239939] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.239942] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.239962] pnp 00:0c: [io 0x0060]
- [ 0.239964] pnp 00:0c: [io 0x0064]
- [ 0.239968] pnp 00:0c: [irq 1]
- [ 0.239998] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.240061] pnp 00:0d: [mem 0xe0000000-0xefffffff]
- [ 0.240100] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.240103] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.240222] pnp 00:0e: [mem 0x00000000-0x0009ffff]
- [ 0.240224] pnp 00:0e: [mem 0x000c0000-0x000cffff]
- [ 0.240226] pnp 00:0e: [mem 0x000e0000-0x000fffff]
- [ 0.240227] pnp 00:0e: [mem 0x00100000-0xbbffffff]
- [ 0.240229] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.240279] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.240281] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.240283] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.240286] system 00:0e: [mem 0x00100000-0xbbffffff] could not be reserved
- [ 0.240288] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.240378] pnp: PnP ACPI: found 15 devices
- [ 0.240380] ACPI: ACPI bus type pnp unregistered
- [ 0.246389] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.246430] pci 0000:00:1f.3: BAR 0: assigned [mem 0xbc000000-0xbc0000ff]
- [ 0.246434] pci 0000:00:1f.3: BAR 0: set to [mem 0xbc000000-0xbc0000ff] (PCI address [0xbc000000-0xbc0000ff])
- [ 0.246437] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbc100000-0xbc2fffff 64bit pref]
- [ 0.246440] pci 0000:00:1c.4: BAR 15: assigned [mem 0xbc300000-0xbc4fffff 64bit pref]
- [ 0.246443] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc500000-0xbc8fffff]
- [ 0.246446] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
- [ 0.246448] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.246451] pci 0000:00:01.0: bridge window [mem 0xfa700000-0xfe7fffff]
- [ 0.246454] pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfdfffff 64bit pref]
- [ 0.246458] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
- [ 0.246460] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
- [ 0.246464] pci 0000:00:1c.0: bridge window [mem 0xbc500000-0xbc8fffff]
- [ 0.246468] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
- [ 0.246473] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
- [ 0.246475] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
- [ 0.246479] pci 0000:00:1c.4: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.246483] pci 0000:00:1c.4: bridge window [mem 0xbc300000-0xbc4fffff 64bit pref]
- [ 0.246488] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
- [ 0.246490] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
- [ 0.246494] pci 0000:00:1c.5: bridge window [mem 0xfe800000-0xfe8fffff]
- [ 0.246497] pci 0000:00:1c.5: bridge window [mem 0xbc100000-0xbc2fffff 64bit pref]
- [ 0.246502] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
- [ 0.246505] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
- [ 0.246509] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.246532] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.246536] pci 0000:00:01.0: setting latency timer to 64
- [ 0.246541] pci 0000:00:1c.0: enabling device (0106 -> 0107)
- [ 0.246545] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.246548] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.246553] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.246557] pci 0000:00:1c.4: setting latency timer to 64
- [ 0.246565] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.246568] pci 0000:00:1c.5: setting latency timer to 64
- [ 0.246573] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.246577] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- [ 0.246579] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
- [ 0.246581] pci_bus 0000:01: resource 1 [mem 0xfa700000-0xfe7fffff]
- [ 0.246583] pci_bus 0000:01: resource 2 [mem 0xbfe00000-0xdfdfffff 64bit pref]
- [ 0.246586] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
- [ 0.246588] pci_bus 0000:04: resource 1 [mem 0xbc500000-0xbc8fffff]
- [ 0.246591] pci_bus 0000:04: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
- [ 0.246593] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
- [ 0.246596] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
- [ 0.246598] pci_bus 0000:03: resource 2 [mem 0xbc300000-0xbc4fffff 64bit pref]
- [ 0.246601] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
- [ 0.246603] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
- [ 0.246606] pci_bus 0000:02: resource 2 [mem 0xbc100000-0xbc2fffff 64bit pref]
- [ 0.246608] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
- [ 0.246611] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff]
- [ 0.246613] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
- [ 0.246615] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
- [ 0.246652] NET: Registered protocol family 2
- [ 0.246855] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.248171] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.251804] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.252297] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.252299] TCP reno registered
- [ 0.252314] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.252381] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.252540] NET: Registered protocol family 1
- [ 0.252567] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.252582] pci 0000:00:1a.0: PCI INT A disabled
- [ 0.252589] pci 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.252603] pci 0000:00:1a.1: PCI INT B disabled
- [ 0.252619] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.380031] pci 0000:00:1a.7: PCI INT C disabled
- [ 0.380063] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.380078] pci 0000:00:1d.0: PCI INT A disabled
- [ 0.380087] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.380101] pci 0000:00:1d.1: PCI INT B disabled
- [ 0.380107] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.380122] pci 0000:00:1d.2: PCI INT C disabled
- [ 0.380130] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.380155] pci 0000:00:1d.7: PCI INT A disabled
- [ 0.380175] pci 0000:01:00.0: Boot video device
- [ 0.380188] PCI: CLS 32 bytes, default 64
- [ 0.380191] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.380193] Placing 64MB software IO TLB between ffff8800b7f87000 - ffff8800bbf87000
- [ 0.380194] software IO TLB at phys 0xb7f87000 - 0xbbf87000
- [ 0.380482] audit: initializing netlink socket (disabled)
- [ 0.380492] type=2000 audit(1336057580.376:1): initialized
- [ 0.415836] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.454227] VFS: Disk quotas dquot_6.5.2
- [ 0.454276] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.454708] fuse init (API version 7.17)
- [ 0.454787] msgmni has been set to 13780
- [ 0.455036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.455056] io scheduler noop registered
- [ 0.455058] io scheduler deadline registered
- [ 0.455085] io scheduler cfq registered (default)
- [ 0.455183] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.455209] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.455249] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.455280] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
- [ 0.455331] pcieport 0000:00:1c.4: setting latency timer to 64
- [ 0.455362] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
- [ 0.455409] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 0.455440] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
- [ 0.455506] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.455526] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.455574] intel_idle: MWAIT substates: 0x20
- [ 0.455575] intel_idle: does not run on family 6 model 15
- [ 0.455653] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.455658] ACPI: Power Button [PWRB]
- [ 0.455697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.455700] ACPI: Power Button [PWRF]
- [ 0.456767] ERST: Table is not found!
- [ 0.456769] GHES: HEST is not enabled!
- [ 0.456831] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.477188] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.513707] Freeing initrd memory: 20812k freed
- [ 0.600585] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.616385] Linux agpgart interface v0.103
- [ 0.617754] brd: module loaded
- [ 0.618415] loop: module loaded
- [ 0.618536] ahci 0000:03:00.0: version 3.0
- [ 0.618550] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.632061] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 0.632067] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 0.632074] ahci 0000:03:00.0: setting latency timer to 64
- [ 0.632437] scsi0 : ahci
- [ 0.632516] scsi1 : ahci
- [ 0.632586] ata1: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16
- [ 0.632589] ata2: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16
- [ 0.632628] ata_piix 0000:00:1f.2: version 2.13
- [ 0.632637] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.632641] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 0.632680] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.632924] scsi2 : ata_piix
- [ 0.632992] scsi3 : ata_piix
- [ 0.633937] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
- [ 0.633942] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
- [ 0.633969] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.633974] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 0.634008] ata_piix 0000:00:1f.5: setting latency timer to 64
- [ 0.634185] scsi4 : ata_piix
- [ 0.634245] scsi5 : ata_piix
- [ 0.634821] ata5: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
- [ 0.634824] ata6: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
- [ 0.634883] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
- [ 0.634888] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.634913] pata_acpi 0000:03:00.1: setting latency timer to 64
- [ 0.634924] pata_acpi 0000:03:00.1: PCI INT B disabled
- [ 0.635183] Fixed MDIO Bus: probed
- [ 0.635199] tun: Universal TUN/TAP device driver, 1.6
- [ 0.635201] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.635251] PPP generic driver version 2.4.2
- [ 0.635342] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.635355] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.635372] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.635375] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.635409] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.635434] ehci_hcd 0000:00:1a.7: debug port 1
- [ 0.639310] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.639322] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
- [ 0.652046] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.652210] hub 1-0:1.0: USB hub found
- [ 0.652216] hub 1-0:1.0: 4 ports detected
- [ 0.652307] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.652316] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.652319] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.652361] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.652383] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.656278] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.656289] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
- [ 0.672046] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.672207] hub 2-0:1.0: USB hub found
- [ 0.672213] hub 2-0:1.0: 6 ports detected
- [ 0.672307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.672318] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.672334] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.672339] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.672341] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.672378] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.672399] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
- [ 0.672502] hub 3-0:1.0: USB hub found
- [ 0.672506] hub 3-0:1.0: 2 ports detected
- [ 0.672559] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.672564] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.672567] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.672603] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.672629] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
- [ 0.672730] hub 4-0:1.0: USB hub found
- [ 0.672733] hub 4-0:1.0: 2 ports detected
- [ 0.672785] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.672791] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.672793] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.672828] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- [ 0.672847] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
- [ 0.672953] hub 5-0:1.0: USB hub found
- [ 0.672957] hub 5-0:1.0: 2 ports detected
- [ 0.673008] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.673014] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.673016] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.673051] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- [ 0.673071] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
- [ 0.673171] hub 6-0:1.0: USB hub found
- [ 0.673174] hub 6-0:1.0: 2 ports detected
- [ 0.673225] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.673231] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.673234] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.673267] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- [ 0.673286] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
- [ 0.673386] hub 7-0:1.0: USB hub found
- [ 0.673389] hub 7-0:1.0: 2 ports detected
- [ 0.673479] usbcore: registered new interface driver libusual
- [ 0.673512] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.673513] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.674092] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.674184] mousedev: PS/2 mouse device common for all mice
- [ 0.674307] rtc_cmos 00:03: RTC can wake from S4
- [ 0.674396] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.674417] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.674485] device-mapper: uevent: version 1.0.3
- [ 0.674545] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 0.674551] cpuidle: using governor ladder
- [ 0.674553] cpuidle: using governor menu
- [ 0.674554] EFI Variables Facility v0.08 2004-May-17
- [ 0.674740] TCP cubic registered
- [ 0.674826] NET: Registered protocol family 10
- [ 0.675206] NET: Registered protocol family 17
- [ 0.675219] Registering the dns_resolver key type
- [ 0.675319] PM: Hibernation image not present or could not be loaded.
- [ 0.675329] registered taskstats version 1
- [ 0.698069] Magic number: 12:871:132
- [ 0.698136] acpi device:07: hash matches
- [ 0.698167] rtc_cmos 00:03: setting system clock to 2012-05-03 15:06:21 UTC (1336057581)
- [ 0.698388] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.698390] EDD information not available.
- [ 0.719616] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 0.960023] ata1: SATA link down (SStatus 0 SControl 300)
- [ 0.960058] ata2: SATA link down (SStatus 0 SControl 300)
- [ 0.962623] ata5: SATA link down (SStatus 0 SControl 300)
- [ 0.973192] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.040037] usb 2-3: new high-speed USB device number 3 using ehci_hcd
- [ 1.173640] hub 2-3:1.0: USB hub found
- [ 1.173971] hub 2-3:1.0: 4 ports detected
- [ 1.380129] Refined TSC clocksource calibration: 2933.332 MHz.
- [ 1.380135] Switching to clocksource tsc
- [ 1.412031] usb 5-2: new low-speed USB device number 2 using uhci_hcd
- [ 1.428199] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.428211] ata3.01: SATA link down (SStatus 0 SControl 300)
- [ 1.432079] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.432090] ata4.01: SATA link down (SStatus 0 SControl 300)
- [ 1.468711] ata3.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
- [ 1.468715] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.472501] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
- [ 1.472505] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.535342] ata3.00: configured for UDMA/133
- [ 1.535479] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
- [ 1.535616] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.535640] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 1.535658] sd 2:0:0:0: [sda] Write Protect is off
- [ 1.535661] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.535680] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.539146] ata4.00: configured for UDMA/133
- [ 1.539240] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
- [ 1.539382] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.539405] sd 3:0:0:0: Attached scsi generic sg1 type 0
- [ 1.539422] sd 3:0:0:0: [sdb] Write Protect is off
- [ 1.539424] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.539443] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.578827] sdb: sdb1
- [ 1.579109] sd 3:0:0:0: [sdb] Attached SCSI disk
- [ 1.593225] sda: sda1 sda2 < sda5 > sda3
- [ 1.593593] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 1.594829] Freeing unused kernel memory: 920k freed
- [ 1.595032] Write protecting the kernel read-only data: 12288k
- [ 1.599238] Freeing unused kernel memory: 1608k freed
- [ 1.602689] Freeing unused kernel memory: 1196k freed
- [ 1.616030] udevd[99]: starting version 175
- [ 1.656356] usb 2-3.3: new full-speed USB device number 4 using ehci_hcd
- [ 1.661913] wmi: Mapper loaded
- [ 1.664482] sky2: driver version 1.30
- [ 1.664517] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.664529] sky2 0000:02:00.0: setting latency timer to 64
- [ 1.664556] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
- [ 1.664637] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
- [ 1.667260] [drm] Initialized drm 1.1.0 20060810
- [ 1.672428] sky2 0000:02:00.0: eth0: addr 00:18:f3:5e:8f:ce
- [ 1.675123] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 1.678932] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 1.678962] pata_jmicron 0000:03:00.1: setting latency timer to 64
- [ 1.682904] scsi6 : pata_jmicron
- [ 1.683712] VGA switcheroo: detected Optimus DSM method \ handle
- [ 1.683737] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.683741] nouveau 0000:01:00.0: setting latency timer to 64
- [ 1.683834] scsi7 : pata_jmicron
- [ 1.684291] ata7: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17
- [ 1.684293] ata8: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17
- [ 1.686195] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046f00a3)
- [ 1.689339] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
- [ 1.702114] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input3
- [ 1.737204] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
- [ 1.737394] skge 0000:05:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.737528] skge: 1.14 addr 0xfeaf4000 irq 19 chip Yukon-Lite rev 9
- [ 1.737964] skge 0000:05:04.0: eth1: addr 00:18:f3:5e:65:38
- [ 1.740123] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
- [ 1.740139] usbcore: registered new interface driver usbhid
- [ 1.740141] usbhid: USB HID core driver
- [ 1.743556] Floppy drive(s): fd0 is 1.44M
- [ 1.756648] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.3/input/input4
- [ 1.756729] generic-usb 0003:046D:0A0B.0002: input,hidraw1: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.7-3.3/input3
- [ 1.764022] FDC 0 is a post-1991 82077
- [ 1.771645] [drm] nouveau 0000:01:00.0: ... appears to be valid
- [ 1.771649] [drm] nouveau 0000:01:00.0: BIT BIOS found
- [ 1.771652] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.43
- [ 1.771655] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
- [ 1.771657] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
- [ 1.771659] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
- [ 1.771661] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
- [ 1.771664] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011310 00000028
- [ 1.771665] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011312 00000000
- [ 1.771667] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00c0c080
- [ 1.771670] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
- [ 1.771672] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
- [ 1.771675] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
- [ 1.771677] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
- [ 1.771679] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
- [ 1.771681] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
- [ 1.771688] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0F0
- [ 1.771733] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE41F
- [ 1.786843] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9BD
- [ 1.786859] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB38
- [ 1.787973] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED91
- [ 1.808398] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
- [ 1.808402] [drm] nouveau 0000:01:00.0: 0: core 550MHz shader 550MHz memory 532MHz fanspeed 100%
- [ 1.808407] [drm] nouveau 0000:01:00.0: c: core 199MHz memory 391MHz
- [ 1.808577] [TTM] Zone kernel: Available graphics memory: 3540144 kiB.
- [ 1.808579] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
- [ 1.808581] [TTM] Initializing pool allocator.
- [ 1.808590] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
- [ 1.815176] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
- [ 1.817695] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.817697] [drm] No driver support for vblank timestamp query.
- [ 1.817700] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
- [ 1.817703] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
- [ 1.817705] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
- [ 1.817708] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
- [ 1.864530] ata7.00: ATAPI: LITE-ON DVDRW LH-20A1H, LL05, max UDMA/66
- [ 1.900500] ata7.00: configured for UDMA/66
- [ 1.902229] scsi 6:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1H LL05 PQ: 0 ANSI: 5
- [ 1.905054] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.905057] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.905319] sr 6:0:0:0: Attached scsi CD-ROM sr0
- [ 1.905454] sr 6:0:0:0: Attached scsi generic sg2 type 5
- [ 2.010191] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x49000, bo ffff8801eda1d000
- [ 2.010367] fbcon: nouveaufb (fb0) is primary device
- [ 2.010535] Console: switching to colour frame buffer device 240x75
- [ 2.010567] fb0: nouveaufb frame buffer device
- [ 2.010569] drm: registered panic notifier
- [ 2.010574] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
- [ 2.236134] firewire_core: created device fw0: GUID 0011d80000de2c6c, S400
- [ 2.392137] kjournald starting. Commit interval 5 seconds
- [ 2.392176] EXT3-fs (sda3): mounted filesystem with ordered data mode
- [ 27.110739] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 27.110745] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 27.131998] udevd[388]: starting version 175
- [ 27.154386] lp: driver loaded but no devices found
- [ 27.189585] Adding 11614956k swap on /dev/sda5. Priority:-1 extents:1 across:11614956k
- [ 27.320661] udevd[406]: renamed network interface eth0 to rename2
- [ 27.367309] usbcore: registered new interface driver snd-usb-audio
- [ 27.371035] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 27.371081] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
- [ 27.371102] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 27.376572] udevd[417]: renamed network interface eth1 to eth0
- [ 27.388653] udevd[406]: renamed network interface rename2 to eth1
- [ 27.426060] type=1400 audit(1336057608.224:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=657 comm="apparmor_parser"
- [ 27.426216] type=1400 audit(1336057608.224:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=675 comm="apparmor_parser"
- [ 27.426369] type=1400 audit(1336057608.224:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=
- 657 comm="apparmor_parser"
- [ 27.426524] type=1400 audit(1336057608.224:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" p
- id=675 comm="apparmor_parser"
- [ 27.426549] type=1400 audit(1336057608.224:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=657 c
- omm="apparmor_parser"
- [ 27.426704] type=1400 audit(1336057608.224:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=67
- 5 comm="apparmor_parser"
- [ 27.427693] type=1400 audit(1336057608.224:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=677 comm="apparmor_parser"
- [ 27.428015] type=1400 audit(1336057608.228:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" p
- id=677 comm="apparmor_parser"
- [ 27.428197] type=1400 audit(1336057608.228:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=6
- 77 comm="apparmor_parser"
- [ 27.430113] type=1400 audit(1336057608.228:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=691 comm="apparmor_parser"
- [ 27.966278] EXT3-fs (sda3): using internal journal
- [ 28.358041] kjournald starting. Commit interval 5 seconds
- [ 28.358766] EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
- [ 28.359329] EXT3-fs (dm-0): using internal journal
- [ 28.359334] EXT3-fs (dm-0): mounted filesystem with ordered data mode
- [ 28.635157] kjournald starting. Commit interval 5 seconds
- [ 28.635550] EXT3-fs (sda1): using internal journal
- [ 28.635555] EXT3-fs (sda1): mounted filesystem with ordered data mode
- [ 29.047318] init: failsafe main process (869) killed by TERM signal
- [ 29.146599] Bluetooth: Core ver 2.16
- [ 29.146620] NET: Registered protocol family 31
- [ 29.146622] Bluetooth: HCI device and connection manager initialized
- [ 29.146625] Bluetooth: HCI socket layer initialized
- [ 29.146626] Bluetooth: L2CAP socket layer initialized
- [ 29.146846] Bluetooth: SCO socket layer initialized
- [ 29.148970] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 29.148973] Bluetooth: BNEP filters: protocol multicast
- [ 29.184149] ppdev: user-space parallel port driver
- [ 29.224807] Bluetooth: RFCOMM TTY layer initialized
- [ 29.224812] Bluetooth: RFCOMM socket layer initialized
- [ 29.224814] Bluetooth: RFCOMM ver 1.11
- [ 29.315413] sky2 0000:02:00.0: eth1: enabling interface
- [ 29.316104] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 29.316694] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 29.318550] skge 0000:05:04.0: eth0: enabling interface
- [ 30.190065] init: gdm main process (1130) killed by TERM signal
- [ 30.539641] init: squid3 main process (1117) killed by HUP signal
- [ 30.839140] init: isc-dhcp-server main process (1114) terminated with status 1
- [ 30.839161] init: isc-dhcp-server main process ended, respawning
- [ 31.096283] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
- [ 31.096287] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
- [ 31.137479] sky2 0000:02:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control both
- [ 31.138116] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 31.161266] init: isc-dhcp-server main process (1256) terminated with status 1
- [ 31.161290] init: isc-dhcp-server main process ended, respawning
- [ 31.432796] init: isc-dhcp-server main process (1279) terminated with status 1
- [ 31.432818] init: isc-dhcp-server main process ended, respawning
- [ 31.585352] init: isc-dhcp-server main process (1298) terminated with status 1
- [ 31.585373] init: isc-dhcp-server main process ended, respawning
- [ 31.756850] init: isc-dhcp-server main process (1381) terminated with status 1
- [ 31.756870] init: isc-dhcp-server main process ended, respawning
- [ 32.074186] init: isc-dhcp-server main process (1390) terminated with status 1
- [ 32.074207] init: isc-dhcp-server main process ended, respawning
- [ 32.235577] init: isc-dhcp-server main process (1409) terminated with status 1
- [ 32.235597] init: isc-dhcp-server main process ended, respawning
- [ 32.878981] init: isc-dhcp-server main process (1440) terminated with status 1
- [ 32.879002] init: isc-dhcp-server main process ended, respawning
- [ 33.551956] init: isc-dhcp-server main process (1631) terminated with status 1
- [ 33.551977] init: isc-dhcp-server main process ended, respawning
- [ 34.341475] init: isc-dhcp-server main process (1694) terminated with status 1
- [ 34.341496] init: isc-dhcp-server main process ended, respawning
- [ 34.505929] init: isc-dhcp-server main process (1802) terminated with status 1
- [ 34.505947] init: isc-dhcp-server respawning too fast, stopped
- [ 39.808009] eth0: no IPv6 routers present
- [ 41.304015] eth1: no IPv6 routers present
- [ 42.229062] init: plymouth-stop pre-start process (3257) terminated with status 1
- [ 75.378358] audit_printk_skb: 84 callbacks suppressed
- [ 75.378361] type=1400 audit(1336057656.176:40): apparmor="DENIED" operation="mkdir" parent=3506 profile="/usr/lib/telepathy/mission-control-5" name
- ="/mnt/sda1/home/francis/.local/share/telepathy/" pid=3507 comm="mission-control" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
- [ 75.458756] type=1400 audit(1336057656.256:41): apparmor="DENIED" operation="open" parent=3506 profile="/usr/lib/telepathy/mission-control-5" name=
- "/mnt/sda1/home/francis/.mission-control/accounts/accounts.cfg" pid=3507 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=100
- 0
- [ 75.519666] type=1400 audit(1336057656.316:42): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/m
- nt/sda1/home/francis/.cache/dconf/user" pid=3507 comm="mission-control" requested_mask="rwc" denied_mask="rwc" fsuid=1000 ouid=1000
- [ 75.520559] type=1400 audit(1336057656.320:43): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/m
- nt/sda1/home/francis/.cache/.mc_connections" pid=3507 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
- [ 88.384018] eth0: no IPv6 routers present
- [ 252.776202] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
- [ 252.776687] CPU1: Core temperature/speed normal
- [ 299.816015] [Hardware Error]: Machine check events logged
- [ 3812.050693] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
- [11253.691997] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
- [13368.050431] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
- [13768.891371] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
- [16010.668949] [drm] nouveau 0000:01:00.0: fail post-validate sync
- [16010.668953] [drm] nouveau 0000:01:00.0: validate vram_list
- [16010.668970] [drm] nouveau 0000:01:00.0: validate: -16
- [16010.705778] [drm] nouveau 0000:01:00.0: error fencing pushbuf: -16
- [16659.050796] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
- [16897.375174] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
- [18430.055424] [drm] nouveau 0000:01:00.0: fail pre-validate sync
- [18430.055429] [drm] nouveau 0000:01:00.0: validate vram_list
- [18430.055450] [drm] nouveau 0000:01:00.0: validate: -16
- francis@berlioz:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement