Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- action (one or more) =
- --help (or -h)
- displays this page
- --cmdhelp cmd(or -ch)
- displays command help
- --resume (or -r)
- send the following commands to an already-running bootloader
- --quiet (or -q)
- surpress excessive console output
- --wait (or -w)
- waits for a device connection (currently a USB cable)
- --create
- full initialization of the target device using the config file
- --download N filename
- download partition filename to N
- --setboot N
- sets the boot partition to partition N
- --format_partition N
- formats contents of partition N
- --read N filename
- reads back partition N into filename
- --getpartitiontable filename
- reads back the partition table into filename
- --getbit filename
- reads back BIT into filename
- --getbct
- reads back the BCT from mass storage
- --odm C Data
- ODM custom 32bit command 'C' with associated 32bit data
- --go
- continues normal execution of the downloaded bootloader
- options =
- --configfile filename
- indicates the configuration file used with the following commands:
- --create, --format_all
- --bct filename
- indicates the file containing the BCT
- --sbk 0x00000000 00000000 00000000 00000000
- indicates the secure boot key for the target device
- --bl filename
- downloads and runs the bootloader specified by filename
- --odmdata N
- sets 32bit customer data into a field in the BCT, either hex or
- decimal
- --diskimgopt N
- sets 32bit data required for disk image convertion tool
- --format_all
- formats all existing partitions on the target device using the config file,
- including partitions and the bct
- --setbootdevtype S
- sets the boot device type fuse value for the device name.
- allowed device name string mentioned below:
- emmc, nand_x8, nand_x16, nor, spi
- --setbootdevconfig N
- sets the boot device config fuse value either hex or decimal
- --verifypart N
- verifies data for partition id = N specified. N=-1
- indicates all partitions
- Intended to be used with --create command only.
- --setbct
- updates the chip specific settings of the BCT in mass storage to
- the bct supplied,used with --create, should not be with --read,and
- --format(delete)_all,format(delete)_partition,--download, and--read
- --sync
- issues force sync commad
- --rawdeviceread S N filename
- reads back N sectors starting from sector S into filename
- --rawdevicewrite S N filename
- writes back N sectors from filename to device starting from sector S
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement