/*
 * UTF-8 (with BOM) English-EN text strings for basic.sh html elements
 */

basicS.mBasic="Basic";
basicS.DCfgSect="Device Configuration";
basicS.CfgDev="Configure Device As";
basicS.DvGtwy="Gateway (Default)";
basicS.DvWBrg="Wireless Bridge/Repeater";
basicS.BrIP="Bridge IP";
basicS.GwIP="AP/Gateway IP";
basicS.StIP="Static IP";
basicS.CurrIP="Current IP";
basicS.RtrIP="Router IP";
basicS.BrNoteClient="(must be outside AP subnet)";
basicS.BrNoteWDS="(must be inside AP subnet)";
basicS.SMsk="Subnet Mask";
basicS.SMNote="(same as AP mask)";
basicS.WanEP="Wan Ethernet Port";
basicS.Dsbl="Disable";
basicS.BrLAN="Bridge To LAN";
basicS.DnsSvs="DNS Servers";
basicS.GwDNS="Use Gateway As DNS Server";
basicS.CustDNS="Custom DNS Server(s)";
basicS.BrClient="Connect Via Client Bridge";
basicS.BrWDS="Connect Via WDS";
basicS.Rptr="Repeater";
basicS.RptrE="Repeater Enabled";
basicS.RptrD="Repeater Disabled";
basicS.BrOpr="Operation Mode";
basicS.None="None";
basicS.Only="Only";
basicS.Auto="Auto";
basicS.auto="auto";
basicS.Prfr="Preferred";
basicS.ChWdth="Channel Width";
basicS.ChAbv="2nd chan. above";
basicS.ChBlw="2nd chan. below";
basicS.TrPwr="Transmit Power";
basicS.Max="Max";
basicS.Cstm="Custom";
basicS.Join="SSID to Join";
basicS.Bcst="SSID to Broadcast";
basicS.Other="Other";
basicS.RScn="Re-Scan";
basicS.Scan="Scan";
basicS.WChn="Wireless Channel";
basicS.Encr="Encryption";
basicS.Pswd="Password";
basicS.rvel="reveal";
basicS.HexK="WEP Hex Key";
basicS.DevMAC="MAC Of <em>This</em> Device";
basicS.OWDS="<em>Other</em> WDS MAC Addresses";
basicS.WANSec="Internet / WAN";
basicS.Cnct="Connect Via";
basicS.Wird="Wired";
basicS.Wrlss="Wireless";
basicS.Mo3g="USB Modem (ppp)";
basicS.CLsExp="Current Lease Expires";
basicS.Renew="DHCP Renew";
basicS.Rleas="DHCP Release";
basicS.UNam="User Name";
basicS.RMod="Reconnect Mode";
basicS.CDmd="Connect On Demand";
basicS.KAlv="Keep Alive";
basicS.MIdl="Max Idle Time";
basicS.FPngs="Failed Pings Before Reconnect";
basicS.PngI="Ping Interval";
basicS.Gtwy="Gateway";
basicS.Srvc="Service";
basicS.S4G3G2G="4G/3G/2G (auto)";
basicS.S3GPrfr="3G Preferred";
basicS.S2GPrfr="2G Preferred";
basicS.S3GOnly="3G Only";
basicS.S2GOnly="2G Only";
basicS.Dvic="Device";
basicS.Pncd="Pincode";
basicS.optl="optional";
basicS.MISP="Mobile ISP";
basicS.CustMAC="Use Custom MAC Address";
basicS.CustMTU="Use Custom MTU";
basicS.LANSec="Local Network / LAN";
basicS.DfltDNS="Default Servers Specified by ISP";
basicS.OpnSrvs="OpenDNS Servers";
basicS.OpnSrvsFS="OpenDNS FamilyShield";
basicS.GooSrvs="Google DNS Servers";
basicS.Srvr="Server";
basicS.SrvPt="Server Port";
basicS.CstDSrv="Custom DNS Servers";
basicS.Allow="Allow";
basicS.Rsln="Resolution";
basicS.RtrDNS="Force Clients To Use Router DNS Servers";
basicS.WlMod="Wireless Mode";
basicS.AcPt="Access Point";
basicS.AcPtID="Access Point SSID";
basicS.GNet="Guest Network";
basicS.GNetID="Guest Network SSID:";
basicS.GNet24ID="Guest Network 2.4GHz SSID:";
basicS.GNet5ID="Guest Network 5GHz SSID:";
basicS.F24GHzOnly="Enabled (2.4GHz Only)";
basicS.F5GHzOnly="Enabled (5GHz Only)";
basicS.Clnt="Client";
//don't think Ad Hoc should be translated
basicS.OpMod="Operation Mode";
basicS.WlFltr="Wireless MAC Filter";
basicS.FltrInfo="MAC filtering applies to all wireless interfaces, including those in client mode. In client mode you must be sure to allow the MAC address of the AP to which you are connected.";
basicS.MACFiPo="MAC Filter Policy";
basicS.AllwMAC="Allow Only MACs Listed Below";
basicS.DnyMAC="Deny Only MACs Listed Below";
basicS.WlBnd="Wireless Band";
basicS.Rndm="Random";
basicS.BcsID="Broadcast SSID";
basicS.WlIso="Wireless Client Isolation";
basicS.DPing="Drop Ping From WAN Side";
basicS.WifiCountry="Country";
basicS.WifiCountryWarning="Gargoyle has attempted to determine your geographical region. If this is not correct, it is strongly recommended to leave this setting as <i>World (Default)</i>.<br>Setting this value incorrectly may lead to you violating regulatory standards in your region. If in doubt, choose <i>World (Default)</i> which is legal in all regions.<br>By setting your country correctly, you may be allowed to use additional channels, higher transmit power or wider channel widths.<br><br>Note: You may only change this setting once.";
basicS.DFSWarning="The selected channel is a <i>DFS (Dynamic Frequency Selection)</i> channel. Before transmitting, Gargoyle must first scan for 60 seconds for signals from radar installations occupying this frequency. If any are detected, Gargoyle may choose to transmit on a <u>different</u> channel to the one you have selected, or may <u>not transmit at all</u> depending on your particular device. Gargoyle will continue to monitor for radar pulses during operation and may switch channels or stop transmitting at any time.";

//javascript
basicS.WaitRb="Please Wait While Settings Are Applied And Device Is Restarted";
basicS.WDSMAC="You must specify at least one MAC address in order to enable WDS";
basicS.DBand="Dual Band";
basicS.SpcEr1="ERROR: Specified";
basicS.SpcEr2="is not valid.";
basicS.DplErr="ERROR: Duplicate";
basicS.ScnWt="Scanning For Wifi Networks";
basicS.NoWLAN="No Wireless Networks found!";
basicS.Sgnl="Signal";
basicS.RnwL="Acquiring new DHCP Lease";
basicS.RlsL="Releasing DHCP Lease";
basicS.ScnMo="Scanning For Mobile Devices";
basicS.NoDv="No devices found";

basicS.WANIntr="WAN Interface";
basicS.Mo3gQMI="USB Modem (QMI)";
basicS.Mo3gNCM="USB Modem (NCM)";
basicS.Mo3gMBIM="USB Modem (MBIM)";
basicS.Mo3gHiLink="USB Modem (HiLink, RNDIS)";
basicS.Dfult="Default";