dmesg TWRP Recovery (normal/works)

<6>[    0.000000] Booting Linux on physical CPU 0

<6>[    0.000000] Initializing cgroup subsys cpu

<5>[    0.000000] Linux version 3.4.0-ElementalX-N7-5.08 (dees_troy@XPS12-Ubuntu) (gcc version 4.8 (GCC) ) #32 SMP PREEMPT Tue Feb 2 19:56:18 CST 2016

<4>[    0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d

<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

<4>[    0.000000] Machine: QCT APQ8064 FLO

<2>[    0.000000] Truncating memory at 0x90000000 to fit in 32-bit physical address space

<6>[    0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized

<6>[    0.000000] Hardboot page reserved at 0x88C00000

<6>[    0.000000] Initialized persistent memory from 88d00000-88dfffff

<6>[    0.000000] cma: CMA: reserved 16 MiB at af800000

<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc

<6>[    0.000000] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536

<6>[    0.000000]  accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4

<7>[    0.000000] On node 0 totalpages: 482047

<7>[    0.000000]   Normal zone: 1556 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 161516 pages, LIFO batch:31

<7>[    0.000000]   HighMem zone: 2536 pages used for memmap

<7>[    0.000000]   HighMem zone: 316439 pages, LIFO batch:31

<6>[    0.000000] allocating 44236800 bytes at c29fa000 (82bfa000 physical) for fb

<6>[    0.000000] PERCPU: Embedded 9 pages/cpu @c542d000 s15744 r8192 d12928 u36864

<7>[    0.000000] pcpu-alloc: s15744 r8192 d12928 u36864 alloc=9*4096

<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 477955

<5>[    0.000000] Kernel command line: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.selinux=permissiveÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPAEHXÚ ‰|
 androidboot.emmc=true androidboot.serialno=0a1bb046 bootreason=Reboot fuse_info=Y ddr_vendor=elpida androidboot.baseband=apq asustek.hw_rev=rev_e androidboot.bootloader=FLO-04.08

<6>[    0.000000] HW Revision: ASUSTek input rev_e

<6>[    0.000000] HW Revision: ASUSTek matched rev_e

<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[    0.000000] Memory: 138MB 1MB 58MB 4MB 7MB 254MB 1420MB = 1882MB total

<5>[    0.000000] Memory: 1831328k/1952160k available, 96860k reserved, 1275900K highmem

<5>[    0.000000] Virtual kernel memory layout:

<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

<5>[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)

<5>[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)

<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

<5>[    0.000000]       .text : 0xc0008000 - 0xc09f2ec4   (10156 kB)

<5>[    0.000000]       .init : 0xc0a00000 - 0xc0b03d80   (1040 kB)

<5>[    0.000000]       .data : 0xc0b04000 - 0xc0c14a38   (1091 kB)

<5>[    0.000000]        .bss : 0xc0c14a5c - 0xc0da1d9c   (1589 kB)

<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-0, MinObjects=0, CPUs=4, Nodes=1

<6>[    0.000000] Preemptible hierarchical RCU implementation.

<6>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.

<6>[    0.000000] NR_IRQS:1177

<6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms

<6>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000000] console [tty0] enabled

<6>[    0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67664)

<6>[    0.150207] pid_max: default: 32768 minimum: 301

<6>[    0.150512] Security Framework initialized

<6>[    0.150512] SELinux:  Initializing.

<7>[    0.150634] SELinux:  Starting in permissive mode

<6>[    0.150726] Mount-cache hash table entries: 512

<6>[    0.151977] Initializing cgroup subsys cpuacct

<6>[    0.152008] Initializing cgroup subsys freezer

<6>[    0.152069] CPU: Testing write buffer coherency: ok

<6>[    0.152313] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

<6>[    0.152343] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available

<6>[    0.152435] Setting up static identity map for 0x808f87b8 - 0x808f8840

<6>[    0.162536] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

<6>[    0.171813] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

<6>[    0.173645] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

<6>[    0.173767] Brought up 4 CPUs

<6>[    0.173828] SMP: Total of 4 processors activated (54.13 BogoMIPS).

<6>[    0.188537] dummy:

<6>[    0.189971] NET: Registered protocol family 16

<6>[    0.196838] DMA: preallocated 1792 KiB pool for atomic coherent allocations

<3>[    0.197204] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver

<5>[    0.200592] MIDR      = 0x511f06f0

<6>[    0.200653] meminfo_init: smem ram ptable found: ver: 0 len: 5

<6>[    0.200683] Found 1 memory banks grouped into 8 memory regions

<6>[    0.201019] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio

<6>[    0.201843] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536

<6>[    0.201843]  accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4

<6>[    0.201965] msm_rpm_init: RPM firmware 3.0.16842936

<3>[    0.222106] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.222137] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.222167] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.222167] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.222198] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.222229] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.222229] msm_rpm_get_status(): Status id 433 not defined for target

<3>[    0.222259] msm_rpm_get_status(): Status id 433 not defined for target

<6>[    0.239746] ASUSTek: Bypassing PCB_ID3

<6>[    0.239807] ASUSTek: PCBID=141

<6>[    0.240753] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en

<6>[    0.240966] pm8921_probe: PMIC revision 1: F4

<6>[    0.240997] pm8921_probe: PMIC revision 2: 06

<6>[    0.241027] pm8921_probe: PMIC version: PM8921 rev 3.0

<6>[    0.241058] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)

<6>[    0.242126] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio

<6>[    0.242645] pm_gpio_probe: OK: base=152, ngpio=44

<6>[    0.242919] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp

<6>[    0.243011] pm8xxx_mpp_probe: OK: base=196, ngpio=12

<6>[    0.244720] pm8821_probe: PMIC revision 1: PM8821 rev F3

<6>[    0.244750] pm8821_probe: PMIC revision 2: PM8821 rev 0B

<6>[    0.244750] pm8821_probe: PMIC version: PM8821 ver 2.1

<6>[    0.245300] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp

<6>[    0.245361] pm8xxx_mpp_probe: OK: base=208, ngpio=4

<3>[    0.245635] gpio_vreg_probe: gpio_label required.

<4>[    0.245666] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22

<6>[    0.246826] saw_probe: id=0, name=8921_s5

<6>[    0.247192] saw_probe: id=1, name=8921_s6

<6>[    0.247528] saw_probe: id=2, name=8821_s0

<6>[    0.247863] saw_probe: id=3, name=8821_s1

<3>[    0.255645] Sensors:DSPS: initial dsps.

<4>[    0.256591] [ELAN] Touch dirver register

<6>[    0.256927] persistent_ram: found existing buffer, size 38492, start 38492

<6>[    0.383605] console [ram-1] enabled

<4>[    0.384155] apq8064_init_fb: lcd_type=0

<6>[    0.384429] apq8064_init_fb: register mipi_JDI_panel_device

<3>[    0.385681] msm_gpiomux_install: write failure: -22

<3>[    0.385864] msm_gpiomux_install: write failure: -22

<3>[    0.385986] msm_gpiomux_install: write failure: -22

<3>[    0.386077] msm_gpiomux_install: write failure: -22

<3>[    0.386260] msm_gpiomux_install: write failure: -22

<3>[    0.386383] msm_gpiomux_install: write failure: -22

<6>[    0.387329] Registering gpio keys

<6>[    0.387420] Reconfigure VOL_UP(GPIO155) and VOL_DOWN(GPIO189) with PMIC

<4>[    0.387725] 8921_l17: Failed to create debugfs directory

<4>[    0.389282] ------------[ cut here ]------------

<4>[    0.389495] WARNING: at arch/arm/mach-msm/subsystem_restart.c:573 subsys_restart_init+0xd8/0x108()

<4>[    0.389617] Modules linked in:

<4>[    0.389892] [<c00148ec>] (unwind_backtrace+0x0/0xe0) from [<c0073218>] (warn_slowpath_common+0x4c/0x64)

<4>[    0.390014] [<c0073218>] (warn_slowpath_common+0x4c/0x64) from [<c00732c0>] (warn_slowpath_null+0x18/0x20)

<4>[    0.390228] [<c00732c0>] (warn_slowpath_null+0x18/0x20) from [<c0a0c35c>] (subsys_restart_init+0xd8/0x108)

<4>[    0.390441] [<c0a0c35c>] (subsys_restart_init+0xd8/0x108) from [<c0008700>] (do_one_initcall+0x8c/0x150)

<4>[    0.390655] [<c0008700>] (do_one_initcall+0x8c/0x150) from [<c0a00a14>] (kernel_init+0xf8/0x1ac)

<4>[    0.390838] [<c0a00a14>] (kernel_init+0xf8/0x1ac) from [<c000eda8>] (kernel_thread_exit+0x0/0x8)

<4>[    0.391052] ---[ end trace 3e07c34b1dad1296 ]---

<6>[    0.393402] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20

<6>[    0.393615] sps:BAM 0x12244000 is registered.

<6>[    0.394226] sps:sps is ready.

<6>[    0.423065] bio: create slab <bio-0> at 0

<6>[    0.423858] vgaarb: loaded

<6>[    0.424133] ION heap vmalloc created

<6>[    0.424255] ION heap mm created at a0000000 with size 5c00000

<6>[    0.424438] ION heap mm_fw created at 9fe00000 with size 1e0000

<6>[    0.424560] ION heap mfc created at a5c00000 with size 2000

<6>[    0.424774] ION heap iommu created

<6>[    0.424926] ION heap qsecom created at fea07000 with size 780000

<6>[    0.425048] ION heap audio created at ff187000 with size 4cf000

<5>[    0.426391] pm8xxx_pwm_probe: OK

<5>[    0.427124] SCSI subsystem initialized

<6>[    0.427581] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31

<6>[    0.427703] sps:BAM 0x28084000 is registered.

<6>[    0.431304] usbcore: registered new interface driver usbfs

<6>[    0.431671] usbcore: registered new interface driver hub

<6>[    0.431915] usbcore: registered new device driver usb

<6>[    0.432189] Linux media interface: v0.10

<6>[    0.432403] Linux video capture interface: v2.00

<7>[    0.432952] Registered led device: white

<6>[    0.433715] apq8064_pm8921_pwm_init+

<6>[    0.433868] apq8064_pm8921_pwm_init-

<6>[    0.434631] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks

<6>[    0.434936] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks

<6>[    0.435150] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks

<6>[    0.435485] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks

<6>[    0.435760] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks

<6>[    0.436004] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks

<6>[    0.436279] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks

<6>[    0.436584] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks

<6>[    0.436828] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks

<6>[    0.437133] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks

<6>[    0.437377] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks

<6>[    0.437683] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks

<6>[    0.438232] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0

<6>[    0.438446] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1

<6>[    0.438781] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0

<6>[    0.439117] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1

<6>[    0.439392] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0

<6>[    0.439727] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1

<6>[    0.439971] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0

<6>[    0.440277] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1

<6>[    0.440612] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0

<6>[    0.440826] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1

<6>[    0.441162] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0

<6>[    0.441406] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1

<6>[    0.441741] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0

<6>[    0.442077] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1

<6>[    0.442352] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0

<6>[    0.442779] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0

<6>[    0.443145] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1

<6>[    0.443389] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0

<6>[    0.443725] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1

<6>[    0.444061] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0

<6>[    0.444458] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1

<6>[    0.444763] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0

<6>[    0.445007] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1

<6>[    0.445281] Advanced Linux Sound Architecture Driver Version 1.0.25.

<6>[    0.446594] Switching to clocksource gp_timer

<6>[    0.486389] NET: Registered protocol family 2

<6>[    0.486999] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.488067] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

<6>[    0.490234] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

<6>[    0.491638] TCP: Hash tables configured (established 131072 bind 65536)

<6>[    0.491943] TCP: reno registered

<6>[    0.492095] UDP hash table entries: 512 (order: 2, 16384 bytes)

<6>[    0.492309] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

<6>[    0.493072] NET: Registered protocol family 1

<6>[    0.493743] RPC: Registered named UNIX socket transport module.

<6>[    0.494049] RPC: Registered udp transport module.

<6>[    0.494201] RPC: Registered tcp transport module.

<6>[    0.494476] RPC: Registered tcp NFSv4.1 backchannel transport module.

<7>[    0.494659] PCI: CLS 0 bytes, default 64

<6>[    0.495086] Trying to unpack rootfs image as initramfs...

<6>[    1.019592] Freeing initrd memory: 5092K

<6>[    1.022277] Detected 9 counters on the L2CC PMU.

<6>[    1.024108] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot

<6>[    1.025482] pil_riva pil_riva: using secure boot

<6>[    1.027648] pil_dsps pil_dsps: using secure boot

<6>[    1.028808] pil_gss pil_gss: using secure boot

<3>[    1.030761] smd_channel_probe_worker: allocation table not initialized

<6>[    1.036499] msm_dsps driver version 4.03.

<6>[    1.038146] NET: Registered protocol family 27

<1>[    1.040893] dma_test_init, minor number 98

<6>[    1.041168] lpass_fatal_init: lpass SSR driver init'ed.

<6>[    1.041412] wcnss_8960: module initialized

<6>[    1.041870] gss_8064_init: gss fatal driver init'ed.

<6>[    1.042480] acpuclk-8064 acpuclk-8064: SPEED BIN: 14

<6>[    1.042663] acpuclk-8064 acpuclk-8064: ACPU PVS: 3

<6>[    1.045227] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported

<6>[    1.045410] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported

<6>[    1.045532] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported

<6>[    1.045745] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported

<5>[    1.048339] msm_rpm_log_probe: OK

<6>[    1.051452] usbcore: registered new interface driver hsic_sysmon

<6>[    1.051971] audit: initializing netlink socket (disabled)

<5>[    1.052215] type=2000 audit(1.040:1): initialized

<4>[    1.053527] highmem bounce pool size: 64 pages

<5>[    1.062591] NFS: Registering the id_resolver key type

<6>[    1.064910] NTFS driver 2.1.30 [Flags: R/W].

<6>[    1.065795] fuse init (API version 7.18)

<6>[    1.072601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)

<6>[    1.072875] io scheduler noop registered

<6>[    1.073272] io scheduler deadline registered (default)

<6>[    1.073516] io scheduler row registered

<6>[    1.073791] io scheduler cfq registered

<6>[    1.074218] io scheduler fiops registered

<6>[    1.074462] io scheduler sio registered

<6>[    1.078643] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000

<6>[    1.079071] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xf00fc000

<6>[    1.079589] mipi_JDI_1080P_pt_init+

<6>[    1.080261] mipi_JDI_lcd_probe+

<6>[    1.080505] mipi_JDI_lcd_probe, hw_revision=0

<6>[    1.080718] mipi_JDI_lcd_probe, lcd_pwm_type=1

<6>[    1.081573] mipi_JDI_lcd_probe+

<6>[    1.081787] mipi_JDI_lcd_probe, hw_revision=0

<6>[    1.082031] mipi_JDI_lcd_probe, lcd_pwm_type=1

<6>[    1.082397] setting pdata->panel_info.fb_num to 3. type: 9

<6>[    1.096038] FrameBuffer[0] 1200x1920 size=28016640 bytes is registered successfully!

<7>[    1.096679] Registered led device: lcd-backlight

<6>[    1.096771] mipi_JDI_lcd_probe-

<6>[    1.096893] mipi_JDI_1080P_pt_init-

<6>[    1.098114] setting pdata->panel_info.fb_num to 1. type: 7

<6>[    1.101074] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!

<6>[    1.101654] mdp4_dtv_vsync_init: ndx=0

<3>[    1.101898] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group ede1fc08

<7>[    1.102111] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)

<6>[    1.102142] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled

<6>[    1.103515]

<6>[    1.103546]  msm_vidc_enc: Inside vid_enc_init()

<6>[    1.104003]

<6>[    1.104003]  msm_vidc_enc: Inside vid_enc_vcd_init()

<6>[    1.105590] msm_serial_hs module loaded

<6>[    1.106079] msm_serial_hsl: detected port #1

<6>[    1.106353] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM

<6>[    1.106750] msm_serial_hsl: detected port #0

<6>[    1.106964] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM

<6>[    1.107452] msm_serial_hsl: driver initialized

<6>[    1.109039] msm_rotator_probe: rotator_hw_revision=2

<6>[    1.112426] diagchar initialized now

<6>[    1.118103] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU

<6>[    1.138000] brd: module loaded

<6>[    1.145782] loop: module loaded

<6>[    1.148193] tabla-slim tabla-slim: Platform data from board file

<3>[    1.308227] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6

<6>[    1.311279] tabla2x-slim tabla2x-slim: Platform data from board file

<6>[    1.374572] wcd9xxx_check_codec_type: codec is tabla_codec

<6>[    1.374786] wcd9xxx_check_codec_type: Read codec idbytes & version

<6>[    1.374816] byte_0[00000002] byte_1[00000000] byte_2[00000000]

<6>[    1.374816]  byte_3[00000001] version = 2

<4>[    1.376892] i2c-core: driver [tabla-i2c-core] using legacy suspend method

<4>[    1.377014] i2c-core: driver [tabla-i2c-core] using legacy resume method

<6>[    1.378326] SCSI Media Changer driver v0.25

<6>[    1.378936] spi_qsd spi_qsd.0: master is unqueued, this is deprecated

<6>[    1.380523] tun: Universal TUN/TAP device driver, 1.6

<6>[    1.380645] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

<6>[    1.380950] PPP generic driver version 2.4.2

<6>[    1.381164] PPP BSD Compression module registered

<6>[    1.381347] PPP Deflate Compression module registered

<6>[    1.383117] PPP MPPE Compression module registered

<6>[    1.383514] NET: Registered protocol family 24

<6>[    1.383789] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

<6>[    1.384185] CSLIP: code copyright 1989 Regents of the University of California.

<6>[    1.384735] wcnss_wlan probed in built-in mode

<6>[    1.386383] usbcore: registered new interface driver asix

<6>[    1.386749] usbcore: registered new interface driver cdc_ether

<6>[    1.387329] usbcore: registered new interface driver net1080

<6>[    1.387664] usbcore: registered new interface driver cdc_subset

<6>[    1.388183] usbcore: registered new interface driver zaurus

<6>[    1.388732] usbcore: registered new interface driver sierra_net

<6>[    1.389221] usbcore: registered new interface driver cdc_ncm

<4>[    1.390289] smb345_probe+

<5>[    1.393951] smb345_charger: [smb345_inok_irq] GPIO pin irq 311 requested ok, smb345_INOK = L

<5>[    1.394165] smb345_charger: [smb345_wireless_irq] GPIO pin irq 322 requested ok, wpc_pok = H

<5>[    1.394378] smb345_charger: [smb345_wireless_en_config] GPIO pin 179, 183 requested ok, wpc_en1 = L, wpc_en2 = L

<4>[    1.394592] smb345_probe-

<4>[    1.394714] i2c-core: driver [smb345] using legacy suspend method

<4>[    1.394927] i2c-core: driver [smb345] using legacy resume method

<5>[    1.395080] bq27541_probe + client->addr= 55

<5>[    1.396301] bq27541_get_psp status: Not charging ret= 0x0280

<5>[    1.397399] bq27541_get_psp voltage_now= 4295000 uV

<5>[    1.398468] bq27541_get_capacity = 100% ret= 100

<5>[    1.399444] bq27541_get_psp temperature= 288 (0.1¢XC)

<5>[    1.400512] bq27541_get_psp current_now = 0 mA

<5>[    1.401489] bq27541_get_psp charge_now (compensated) = 3811000 uAh

<5>[    1.402496] bq27541_get_psp charge_avg (uncompensated) = 3865000 uAh

<5>[    1.403533] bq27541_get_psp charge_full = 3811000 uAh

<5>[    1.404510] bq27541_get_psp charge_design = 3828000 uAh

<5>[    1.405578] bq27541_get_psp energy_now = 14629000 uWh

<5>[    1.406555] bq27541_get_psp charge_counter = 0 uWh

<5>[    1.407653] bq27541_get_psp power_now = 0 uW

<5>[    1.408630] bq27541_get_psp cycle count = 88

<5>[    1.409820] bq27541_get_psp status: Not charging ret= 0x0280

<5>[    1.410827] bq27541_get_psp status: Not charging ret= 0x0280

<5>[    1.411865] setup_low_battery_irq irq=317, LL_BAT_T30=1

<5>[    1.411926] bq27541_get_psp voltage_now= 4295000 uV

<5>[    1.412322] bq27541_probe - bq27541-battery driver registered

<4>[    1.412780] i2c-core: driver [bq27541-battery] using legacy suspend method

<5>[    1.412811] bq27541_get_capacity = 100% ret= 100

<4>[    1.413360] i2c-core: driver [bq27541-battery] using legacy resume method

<5>[    1.413696] bq27541_get_psp temperature= 288 (0.1¢XC)

<6>[    1.414123] msm_otg msm_otg: msm_otg probe

<3>[    1.414398] msm_otg msm_otg: failed to get phy_clk

<5>[    1.414581] bq27541_get_psp current_now = 0 mA

<6>[    1.415069] msm_otg msm_otg: OTG regs = f0308000

<7>[    1.415435] msm_otg msm_otg: platform_get_irq for async_int failed

<5>[    1.415466] bq27541_get_psp charge_now (compensated) = 3811000 uAh

<5>[    1.416351] bq27541_get_psp charge_avg (uncompensated) = 3865000 uAh

<7>[    1.417022] msm_hsusb_config_vddcx: min_vol:1045000 max_vol:1320000

<5>[    1.417419] bq27541_get_psp charge_full = 3811000 uAh

<5>[    1.418395] bq27541_get_psp charge_design = 3828000 uAh

<7>[    1.419250] reg (HPM)

<5>[    1.419891] bq27541_get_psp energy_now = 14629000 uWh

<7>[    1.420043] msm_otg msm_otg: MHL can not be supported without PMIC Id

<7>[    1.420227] msm_otg msm_otg: MHL can not be supported

<3>[    1.420257] msm_otg msm_otg: PMIC IRQ for ID notifications doesn't exist

<5>[    1.420623] bq27541_get_psp charge_counter = 0 uWh

<7>[    1.420959] gpio_request: gpio-23 (msm_otg_ap_acok) status -16

<4>[    1.420959] gpio 23 request failed

<4>[    1.421081] msm_otg_acok_init: GPIO pin irq 311 requested ok, msm_otg_ACOK = L

<5>[    1.421325] bq27541_get_psp power_now = 0 uW

<4>[    1.421783] msm_otg_id_pin_init: GPIO pin irq 365 requested ok, msm_otg_id_pin = H

<5>[    1.422027] bq27541_get_psp cycle count = 88

<7>[    1.422241] c045c7cc

<7>[    1.422332] msm_otg msm_otg: OTG runtime idle

<6>[    1.422546] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<7>[    1.422851] msm_otg msm_otg: host driver registered w/ tranceiver

<6>[    1.423858] usbcore: registered new interface driver cdc_acm

<6>[    1.424041] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

<6>[    1.424224] usbcore: registered new interface driver cdc_wdm

<6>[    1.424407] Initializing USB Mass Storage driver...

<6>[    1.424621] usbcore: registered new interface driver usb-storage

<6>[    1.424804] USB Mass Storage support registered.

<6>[    1.424987] usbcore: registered new interface driver ums-alauda

<6>[    1.425231] usbcore: registered new interface driver ums-cypress

<6>[    1.425415] usbcore: registered new interface driver ums-datafab

<6>[    1.425689] usbcore: registered new interface driver ums-freecom

<6>[    1.425872] usbcore: registered new interface driver ums-isd200

<6>[    1.426116] usbcore: registered new interface driver ums-jumpshot

<6>[    1.426300] usbcore: registered new interface driver ums-karma

<6>[    1.426544] usbcore: registered new interface driver ums-onetouch

<6>[    1.426727] usbcore: registered new interface driver ums-sddr09

<6>[    1.427001] usbcore: registered new interface driver ums-sddr55

<6>[    1.427154] usbcore: registered new interface driver ums-usbat

<6>[    1.427520] usbcore: registered new interface driver usbserial

<6>[    1.427642] usbserial: USB Serial Driver core

<6>[    1.427917] usbcore: registered new interface driver option

<6>[    1.428070] USB Serial support registered for GSM modem (1-port)

<6>[    1.428314] usbcore: registered new interface driver sierra

<6>[    1.428466] USB Serial support registered for Sierra USB modem

<6>[    1.428741] usbcore: registered new interface driver qc_csvt

<6>[    1.428894] USB Serial support registered for qc_csvt

<6>[    1.429168] usbcore: registered new interface driver usb_ehset_test

<6>[    1.429351] usbcore: registered new interface driver diag_bridge

<6>[    1.429901] usbcore: registered new interface driver mdm_bridge

<6>[    1.431213] usbcore: registered new interface driver ks_bridge

<6>[    1.431610] ksb_init: init done

<7>[    1.432159] msm_otg msm_otg: peripheral driver registered w/ tranceiver

<7>[    1.432220] UNDEFINED work

<6>[    1.432281] msm_otg msm_otg: phy_reset: success

<6>[    1.433776] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32

<6>[    1.434326] mbim_init: initialize 1 instances

<6>[    1.434722] mbim_init: Initialized 1 ports

<6>[    1.438385] rndis_qc_init: initialize rndis QC instance

<6>[    1.439208] android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>[    1.439605] android_usb gadget: Number of LUNs=1

<6>[    1.439849]  lun0: LUN: removable file: (no medium)

<6>[    1.440979] android_usb gadget: android_usb ready

<6>[    1.442321] mousedev: PS/2 mouse device common for all mice

<6>[    1.443969] usbcore: registered new interface driver xpad

<4>[    1.444213] [ektf3k]:[elan] elan_ktf3k_ts_init

<4>[    1.444824] [ektf3k]:[ELAN] Start HW reset!

<4>[    1.537506] [usb_otg] switch to peripheral mode by default (boot)


<4>[    1.697479] [ektf3k]:[elan]detect intr=>Old FW

<4>[    1.697875] [ektf3k]:The boot code is old!

<4>[    1.727752] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55

<4>[    1.727966] [ektf3k]:[elan] hello packet's rc = 0

<6>[    1.937805] notifying plugin

<7>[    1.937835] id_pin_irq_work_function: gpio_get_value(APQ_OTG_ID_PIN) = 1

<7>[    1.937927] PMIC: BSV set

<7>[    1.937927] PMIC: BSV init complete

<7>[    1.937957] b_sess_vld

<7>[    1.937988] msm_otg msm_otg: chg detection work

<4>[    1.939788] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xa044

<4>[    1.941925] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x007e

<4>[    1.944061] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00d2

<4>[    1.946105] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3029

<4>[    1.948242] [ektf3k]:[elan] __fw_packet_handler: boot code id: 0x6047

<4>[    1.948364] [ektf3k]:[Elan] Max X=2239, Max Y=1343

<6>[    1.948760] input: elan-touchscreen as /devices/virtual/input/input0

<6>[    1.949279] input: wake_gesture as /devices/virtual/input/input1

<4>[    1.949554] [ektf3k]:The firmware was version 0xA044 and id:0x3029

<4>[    1.949768] [ektf3k]: /proc/ektf_dbg created

<4>[    1.950256] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode

<4>[    1.950439] [ektf3k]:[ELAN]misc_register finished!!

<6>[    1.950622] elan-ktf3k 3-0010: Update power source to 0

<6>[    1.951080] wake_timeout version 2.0

<6>[    1.951507] lis3dh_acc accelerometer driver: init

<4>[    1.951660] i2c-core: driver [lis3dh_acc] using legacy suspend method

<4>[    1.951873] i2c-core: driver [lis3dh_acc] using legacy resume method

<6>[    1.952209] ASUSTek: lid_driver_probe

<6>[    1.952484] input: lid_input as /devices/virtual/input/input2

<6>[    1.954010] using rtc device, pm8xxx_rtc, for alarms

<6>[    1.954162] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0

<6>[    1.954803] i2c /dev entries driver

<3>[    1.958374] ov5693_init_module:105

<3>[    1.958862] ov5693_init_module:110 rc -19

<7>[    1.987487] msm_otg msm_otg: chg detection work

<3>[    1.993438] gpio 25 VCM_PD(1)

<3>[    1.993591] gpio 31 XSHUTDN(1)

<7>[    2.037445] msm_otg msm_otg: chg detection work

<6>[    2.052307] mi1040_init_module:323

<3>[    2.052734] mi1040_init_module:329 rc -19

<7>[    2.067565] msm_otg msm_otg: chg detection work

<6>[    2.067718] msm_otg msm_otg: chg_type = USB_SDP_CHARGER

<5>[    2.068115] smb345_charger: [usb_cable_type_detect] INOK=L

<5>[    2.068328] smb345_charger: [usb_cable_type_detect] Cable: SDP

<5>[    2.069244] smb345_charger: [smb345_vflt_setting] Bypass set Float Volt=e8

<4>[    2.069793] ========================================================

<4>[    2.070190] bq27541_battery_callback  usb_cable_state = 1

<4>[    2.070404] ========================================================

<6>[    2.070800] battery_callback cable_wake_lock 5 sec...

<6>[    2.070800]

<6>[    2.071228] elan-ktf3k 3-0010: Update power source to 1

<6>[    2.072052] The USB cable status = CHARGER_SDP

<7>[    2.072296] b_idle work

<7>[    2.072296] b_sess_vld

<7>[    2.072326] msm_otg msm_otg: gadget on

<6>[    2.076019] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received

<3>[    2.227478] gpio 43 CAM_RST(1)

<6>[    2.287414] mi1040_sensor_match_id +++

<6>[    2.288177] Sensor id: 0x2481

<6>[    2.288391] PMIC gpio 11 CAM_VENDOR_1(0)

<6>[    2.288513] PMIC gpio 10 CAM_VENDOR_0(0)

<6>[    2.288635] PMIC gpio 24 CAM_LENS(0)

<6>[    2.288818] Vendor is B

<6>[    2.288940] mi1040_sensor_match_id ---

<6>[    2.529235] lirc_dev: IR Remote Control driver registered, major 236

<6>[    2.529449] IR NEC protocol handler initialized

<6>[    2.529541] IR RC5(x) protocol handler initialized

<6>[    2.529754] IR RC6 protocol handler initialized

<6>[    2.529846] IR JVC protocol handler initialized

<6>[    2.529968] IR Sony protocol handler initialized

<6>[    2.530151] IR RC5 (streamzap) protocol handler initialized

<6>[    2.530273] IR SANYO protocol handler initialized

<6>[    2.530456] IR MCE Keyboard/mouse protocol handler initialized

<6>[    2.530548] IR LIRC bridge handler initialized

<6>[    2.531311] gspca_main: v2.14.0 registered

<6>[    2.531799] usbcore: registered new interface driver uvcvideo

<6>[    2.531982] USB Video Class driver (1.1.1)

<3>[    2.533660] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517

<6>[    2.534729] CAP1106: [cap1106_init]

<4>[    2.534881] i2c-core: driver [cap1106] using legacy suspend method

<4>[    2.535003] i2c-core: driver [cap1106] using legacy resume method

<6>[    2.558319] pm8xxx_tm_probe: OK

<6>[    2.559326] pm8xxx_tm_probe: OK

<6>[    2.561096] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com

<6>[    2.563049] cpuidle: using governor ladder

<6>[    2.563415] cpuidle: using governor menu

<6>[    2.564270] mmc0: SDCC Version: 0x06000018

<6>[    2.566162] mmc0: bam physical base=0x12402000

<6>[    2.566375] mmc0: bam virtual base=0xf0334000

<6>[    2.566467] sps:BAM 0x12402000 is registered.

<6>[    2.566589] mmc0: BAM device registered. bam_handle=0xc22f8800

<6>[    2.568695] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6

<6>[    2.570434] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130

<6>[    2.570648] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800

<3>[    2.570892] mmc0: No card detect facilities available

<6>[    2.572753] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1

<6>[    2.572967] mmc0: Controller capabilities: 0x0000039a

<6>[    2.573059] mmc0: 8 bit data mode enabled

<6>[    2.573242] mmc0: 4 bit data mode disabled

<6>[    2.573364] mmc0: polling status mode disabled

<6>[    2.573455] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz

<6>[    2.573669] mmc0: Slot eject status = 0

<6>[    2.573791] mmc0: Power save feature enable = 1

<6>[    2.573974] mmc0: SPS-BAM data transfer mode available

<6>[    2.578094] usbcore: registered new interface driver usbhid

<6>[    2.578216] usbhid: USB HID core driver

<6>[    2.579071] ashmem: initialized

<6>[    2.579803] usbcore: registered new interface driver snd-usb-audio

<3>[    2.581451] tabla_probe

<6>[    2.583282] msm_pcm_probe: dev name msm-voip-dsp

<6>[    2.583709] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8

<6>[    2.583923] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8

<6>[    2.585205] msm_pcm_probe: dev name msm-pcm-dsp

<6>[    2.585754] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp

<6>[    2.586181] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp

<6>[    2.586364] adding pm_qos request in low latency driver

<6>[    2.586486] done adding pm_qos request in low latency driver

<6>[    2.587707] msm_compr_probe: dev name msm-compr-dsp

<6>[    2.588439] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa

<3>[    2.589630] msm8930_audio_init: Not the right machine type

<3>[    2.589721] msm_audio_init: Not the right machine type

<6>[    2.589843] msm_audio_init: Not APQ8064 in I2S mode

<6>[    2.591156] tabla codec probe...

<6>[    2.706359] mmc0: new HS200 MMC card at address 0001

<6>[    2.708007] mmcblk0: mmc0:0001 016GE2 14.6 GiB

<6>[    2.714904]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30

<6>[    2.721923] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok

<6>[    2.722808] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok

<6>[    2.723541] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok

<6>[    2.724456] asoc: snd-soc-dummy-dai <-> VoIP mapping ok

<6>[    2.725250] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok

<6>[    2.726196] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok

<6>[    2.726959] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok

<6>[    2.727722] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok

<6>[    2.728485] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok

<6>[    2.729400] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok

<6>[    2.730163] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok

<6>[    2.730987] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok

<6>[    2.731689] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok

<6>[    2.732513] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok

<6>[    2.733276] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok

<6>[    2.734710] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok

<6>[    2.739654] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok

<6>[    2.740417] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok

<6>[    2.741058] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok

<6>[    2.741851] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok

<6>[    2.742401] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok

<6>[    2.743103] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok

<6>[    2.743835] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok

<6>[    2.744567] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok

<6>[    2.745208] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok

<6>[    2.745941] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok

<6>[    2.746551] asoc: tabla_rx2 <-> msm-dai-stub mapping ok

<6>[    2.747314] asoc: tabla_tx1 <-> msm-dai-stub mapping ok

<6>[    2.747985] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok

<6>[    2.748779] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok

<6>[    2.749450] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok

<6>[    2.750305] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok

<6>[    2.750946] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok

<6>[    2.751678] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok

<6>[    2.752349] asoc: tabla_tx3 <-> msm-dai-stub mapping ok

<6>[    2.753051] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok

<6>[    2.753723] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok

<6>[    2.756469] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3

<6>[    2.756958] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4

<6>[    2.760559] headset_init+ #####

<6>[    2.761688] input: h2w button as /devices/virtual/input/input5

<6>[    2.762298] HEADSET: Headset detection mode

<6>[    2.817749] set_hs_micbias badgap status: OFF power down bandgap

<6>[    2.818054] headset_init- #####

<6>[    2.818481] u32 classifier

<6>[    2.818847]     Actions configured

<6>[    2.819458] TCP: bic registered

<6>[    2.819671] TCP: cubic registered

<6>[    2.819885] TCP: westwood registered

<6>[    2.820281] TCP: highspeed registered

<6>[    2.820495] TCP: hybla registered

<6>[    2.820709] TCP: htcp registered

<6>[    2.821075] TCP: vegas registered

<6>[    2.821319] TCP: veno registered

<6>[    2.821533] TCP: scalable registered

<6>[    2.821899] TCP: lp registered

<6>[    2.822113] TCP: yeah registered

<6>[    2.822357] TCP: illinois registered

<6>[    2.822570] Initializing XFRM netlink socket

<6>[    2.822967] NET: Registered protocol family 17

<6>[    2.823242] NET: Registered protocol family 15

<6>[    2.823730] L2TP core driver, V2.0

<6>[    2.823974] PPPoL2TP kernel driver, V2.0

<5>[    2.824188] Registering the dns_resolver key type

<6>[    2.826232] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0

<5>[    2.826721] Registering SWP/SWPB emulation handler

<6>[    2.827301] clock_late_init: Removing enables held for handed-off clocks

<6>[    2.833343] MSM Watchdog Initialized

<6>[    2.853668] msm-sleeper version 1.2

<7>[    2.856109] gpio_set_debounce: gpio-26 status -22

<7>[    2.856323] gpio_set_debounce: gpio-155 status -22

<7>[    2.856506] gpio_set_debounce: gpio-189 status -22

<6>[    2.857116] input: gpio-keys as /devices/platform/gpio-keys.0/input/input6

<6>[    2.857818] [sweep2wake]: set device gpio-keys

<6>[    2.858398] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2019-07-11 21:23:17 UTC (1562880197)

<3>[    2.859466] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22

<3>[    2.859893] Unable to register core for 0

<4>[    2.860137] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22

<6>[    2.860900] ALSA device list:

<6>[    2.861114]   #0: apq8064-tabla-snd-card

<6>[    2.864288] Freeing init memory: 1036K

<5>[    2.869323] init: init started!

<7>[    2.880523] SELinux: 2048 avtab hash slots, 5604 rules.

<7>[    2.887145] SELinux: 2048 avtab hash slots, 5604 rules.

<7>[    2.887207] SELinux:  1 users, 2 roles, 598 types, 0 bools, 1 sens, 1024 cats

<7>[    2.887237] SELinux:  87 classes, 5604 rules

<7>[    2.890716] SELinux:  Completing initialization.

<7>[    2.890716] SELinux:  Setting up existing superblocks.

<7>[    2.890777] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

<7>[    2.890838] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

<7>[    2.892364] SELinux: initialized (dev bdev, type bdev), not configured for labeling

<7>[    2.892425] SELinux: initialized (dev proc, type proc), uses genfs_contexts

<7>[    2.892486] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[    2.892547] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

<7>[    2.907348] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

<7>[    2.907379] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

<7>[    2.907409] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling

<7>[    2.907531] SELinux: initialized (dev devpts, type devpts), uses transition SIDs

<7>[    2.907592] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

<7>[    2.907714] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<7>[    2.907775] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

<5>[    2.927978] type=1403 audit(1562880197.560:2): policy loaded auid=4294967295 ses=4294967295

<5>[    2.928802] init: (Initializing SELinux enforcing took 0.06s.)

<5>[    2.940521] type=1400 audit(1562880197.570:3): avc:  denied  { module_request } for  pid=1 comm="init" kmod="personality-8" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1

<5>[    2.944763] init: init second stage started!

<3>[    3.605499] init: waitpid failed: No child processes

<5>[    3.606964] init: (Loading properties from /default.prop took 0.00s.)

<3>[    3.607696] init: /init.rc: 63: invalid command 'load_all_props'

<3>[    3.607879] init: could not import file '/init.recovery.logd.rc' from '/init.rc'

<3>[    3.608062] init: could not import file '/init.recovery.mksh.rc' from '/init.rc'

<5>[    3.608276] init: (Parsing /init.recovery.usb.rc took 0.00s.)

<5>[    3.608428] init: (Parsing /init.recovery.service.rc took 0.00s.)

<3>[    3.608581] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc'

<3>[    3.608734] init: could not import file '/init.recovery.flo.rc' from '/init.rc'

<5>[    3.608825] init: (Parsing /init.rc took 0.00s.)

<5>[    3.609039] type=1400 audit(1562880198.240:4): avc:  denied  { setcheckreqprot } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1

<5>[    3.609283] type=1400 audit(1562880198.240:5): avc:  denied  { setcurrent } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1

<5>[    3.609436] type=1400 audit(1562880198.240:6): avc:  denied  { dyntransition } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1

<3>[    3.609680] init: SELinux: Could not get canonical path /postinstall restorecon: No such file or directory.

<5>[    3.609863] init: Starting service 'ueventd'...

<5>[    3.610229] init: Waiting for /dev/.coldboot_done...

<5>[    3.611297] type=1400 audit(1562880198.240:7): avc:  denied  { module_request } for  pid=167 comm="ueventd" kmod="personality-8" scontext=u:r:ueventd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1

<5>[    3.613586] ueventd: ueventd started!

<5>[    3.661163] bq27541_get_psp status: Full ret= 0x0281

<5>[    3.661926] bq27541_get_psp voltage_now= 4292000 uV

<5>[    3.662567] bq27541_get_capacity = 100% ret= 100

<5>[    3.663330] bq27541_get_psp temperature= 288 (0.1¢XC)

<5>[    3.664001] bq27541_get_psp current_now = -56 mA

<5>[    3.664672] bq27541_get_psp charge_now (compensated) = 3817000 uAh

<5>[    3.665344] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh

<5>[    3.666076] bq27541_get_psp charge_full = 3817000 uAh

<5>[    3.666748] bq27541_get_psp charge_design = 3828000 uAh

<5>[    3.667480] bq27541_get_psp energy_now = 14658000 uWh

<5>[    3.668151] bq27541_get_psp charge_counter = 0 uWh

<5>[    3.668823] bq27541_get_psp power_now = -240000 uW

<5>[    3.669555] bq27541_get_psp cycle count = 88

<5>[    4.078521] bq27541_get_psp status: Full ret= 0x0281

<5>[    4.079498] bq27541_get_psp status: Full ret= 0x0281

<5>[    4.080322] bq27541_get_psp voltage_now= 4292000 uV

<5>[    4.081115] bq27541_get_capacity = 100% ret= 100

<5>[    4.082061] bq27541_get_psp temperature= 288 (0.1¢XC)

<5>[    4.082855] bq27541_get_psp current_now = -56 mA

<5>[    4.083801] bq27541_get_psp charge_now (compensated) = 3817000 uAh

<5>[    4.084594] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh

<5>[    4.085540] bq27541_get_psp charge_full = 3817000 uAh

<5>[    4.086334] bq27541_get_psp charge_design = 3828000 uAh

<5>[    4.087280] bq27541_get_psp energy_now = 14658000 uWh

<5>[    4.088073] bq27541_get_psp charge_counter = 0 uWh

<5>[    4.089019] bq27541_get_psp power_now = -240000 uW

<5>[    4.089813] bq27541_get_psp cycle count = 88

<5>[    4.169708] smb345_charger: [smb345_config_thermal_limit] Set HRD SFT limit, retval=41 setting=73

<5>[    4.170562] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4292000

<5>[    4.171417] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt setting=e8 V=4300mV

<5>[    4.172149] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<3>[    4.612915] init: Timed out waiting for /dev/.coldboot_done

<5>[    4.613372] init: Waiting for /dev/.coldboot_done took 1.00s.

<7>[    4.735443] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

<3>[    4.737426] enable_store: android_usb: already disabled

<5>[    4.737762] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory

<5>[    4.738647] init: (Loading properties from /system/build.prop took 0.00s.)

<5>[    4.738769] init: (Loading properties from /vendor/build.prop took 0.00s.)

<5>[    4.738952] init: (Loading properties from /factory/factory.prop took 0.00s.)

<3>[    4.739440] init: error opening block device /dev/block/platform/msm_sdcc.1/by-name/recovery: No such file or directory

<5>[    4.739685] init: (Loading properties from /data/local.prop took 0.00s.)

<3>[    4.739807] init: Unable to open persistent property directory "/data/property": No such file or directory

<5>[    4.740875] init: Starting service 'set_permissive'...

<5>[    4.741394] init: Starting service 'recovery'...

<5>[    4.741973] init: Starting service 'adbd'...

<5>[    4.742706] type=1400 audit(1562880199.371:8): avc:  denied  { module_request } for  pid=173 comm="recovery" kmod="personality-8" scontext=u:r:recovery:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1

<5>[    4.744049] type=1400 audit(1562880199.371:9): avc:  denied  { module_request } for  pid=174 comm="adbd" kmod="personality-8" scontext=u:r:adbd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1

<6>[    4.750610] adb_open

<6>[    4.750762] adb_bind_config

<5>[    4.779205] type=1400 audit(1562880199.411:10): avc:  denied  { write } for  pid=184 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1

<5>[    4.781005] init: Service 'set_permissive' (pid 172) exited with status 0

<3>[    4.788452] init: avc:  denied  { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service

<4>[    4.811553] mipi_dsi_panel_power+, on=1

<3>[    4.853179] msm_otg msm_otg: Failed notifying 1 charger type to PMIC

<6>[    4.853271] android_work: android_work: did not send uevent (0 0   (null))

<7>[    4.855438] portsc = 88000a05

<4>[    4.888061] mipi_dsi_panel_power-

<6>[    4.894073] mipi_JDI_lcd_on+

<6>[    4.894073] mipi_JDI_lcd_on-, booting

<6>[    4.923004] mipi_JDI_set_recovery_backlight: 100/255

<6>[    4.940032] android_work: android_work: sent uevent USB_STATE=CONNECTED

<6>[    4.964843] android_usb gadget: high-speed config #1: android_usb

<3>[    4.964874] msm_otg msm_otg: Failed notifying 1 charger type to PMIC

<6>[    4.964904] USB fast charging is OFF.

<6>[    4.964904] msm_otg msm_otg: Avail curr from USB = 500

<7>[    4.964935] msm_otg msm_otg: Power Supply doesn't support USB charger

<6>[    4.978454] mipi_JDI_lcd_off+

<6>[    4.978454] mipi_JDI_lcd_off-, set_recovery_bl_done, do nothing

<4>[    4.978515] mipi_dsi_panel_power+, on=0

<6>[    4.978515] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing

<4>[    4.985229] mipi_dsi_panel_power+, on=1

<6>[    4.985260] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing

<5>[    4.988647] ueventd: Coldboot took 1.36s.

<6>[    4.991546] mipi_JDI_lcd_on+

<6>[    4.991546] mipi_JDI_lcd_on-, set_recovery_bl_done, do nothing

<6>[    5.018127] android_work: android_work: sent uevent USB_STATE=CONFIGURED

<6>[    5.098175] mipi_JDI_set_backlight: pwm enable

<6>[    5.218078] msm_thermal: setting trip range 0..80 on sensor 7.

<6>[    5.229217] EXT4-fs (mmcblk0p30): recovery complete

<6>[    5.229919] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts:

<7>[    5.230072] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr

<6>[    5.329803] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts:

<7>[    5.330230] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr

<7>[    7.078308] msm_ta_detect_work: ta detection work

<6>[    7.078338] msm_ta_detect_work: USB exit ta detection - frindex

<6>[    7.107238] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts:

<7>[    7.107666] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr

<6>[    7.186553] EXT4-fs (mmcblk0p23): recovery complete

<6>[    7.187286] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:

<7>[    7.187530] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr

<4>[    7.188293] audit_printk_skb: 15 callbacks suppressed

<5>[    7.188507] type=1400 audit(1562880201.823:16): avc:  denied  { create } for  pid=173 comm="recovery" name="fstab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1

<5>[    7.188781] type=1400 audit(1562880201.823:17): avc:  denied  { write } for  pid=173 comm="recovery" name="fstab" dev="rootfs" ino=8421 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1

<6>[    7.203674] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:

<7>[    7.203826] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr

<6>[    7.220825] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:

<7>[    7.221282] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr

<5>[    7.232543] type=1400 audit(1562880201.863:18): avc:  denied  { read } for  pid=173 comm="recovery" name="/" dev="mmcblk0p30" ino=2 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1

<5>[    7.233245] type=1400 audit(1562880201.863:19): avc:  denied  { open } for  pid=173 comm="recovery" name="/" dev="mmcblk0p30" ino=2 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1

<5>[    7.235504] type=1400 audit(1562880201.863:20): avc:  denied  { getattr } for  pid=173 comm="recovery" path="/data/bootchart" dev="mmcblk0p30" ino=244321 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1

<5>[    7.236236] type=1400 audit(1562880201.863:21): avc:  denied  { read } for  pid=173 comm="recovery" name="bootchart" dev="mmcblk0p30" ino=244321 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1

<5>[    7.236755] type=1400 audit(1562880201.863:22): avc:  denied  { open } for  pid=173 comm="recovery" name="bootchart" dev="mmcblk0p30" ino=244321 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1

<6>[    7.239593] SELinux:  Context u:object_r:recovery_data_file:s0 is not valid (left unmapped).

<5>[    7.241851] type=1400 audit(1562880201.873:23): avc:  denied  { getattr } for  pid=173 comm="recovery" path="/data/misc/bluedroid" dev="mmcblk0p30" ino=635237 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1

<5>[    7.242584] type=1400 audit(1562880201.873:24): avc:  denied  { read } for  pid=173 comm="recovery" name="bluedroid" dev="mmcblk0p30" ino=635237 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1

<5>[    7.243255] type=1400 audit(1562880201.873:25): avc:  denied  { open } for  pid=173 comm="recovery" name="bluedroid" dev="mmcblk0p30" ino=635237 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1

<6>[    7.244598] SELinux:  Context u:object_r:bluetooth_logs_data_file:s0 is not valid (left unmapped).

<6>[    7.249847] SELinux:  Context u:object_r:network_watchlist_data_file:s0 is not valid (left unmapped).

<6>[    7.250305] SELinux:  Context u:object_r:textclassifier_data_file:s0 is not valid (left unmapped).

<6>[    7.255645] SELinux:  Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).

<6>[    7.256958] SELinux:  Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).

<6>[    7.257568] SELinux:  Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).

<6>[    7.258178] SELinux:  Context u:object_r:update_engine_log_data_file:s0 is not valid (left unmapped).

<6>[    7.258666] SELinux:  Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).

<6>[    7.259216] SELinux:  Context u:object_r:wm_trace_data_file:s0 is not valid (left unmapped).

<6>[    7.260040] SELinux:  Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).

<6>[    7.260894] SELinux:  Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).

<6>[    7.264709] SELinux:  Context u:object_r:trace_data_file:s0 is not valid (left unmapped).

<6>[    7.266021] SELinux:  Context u:object_r:vendor_data_file:s0 is not valid (left unmapped).

<6>[    7.268035] SELinux:  Context u:object_r:tombstone_wifi_data_file:s0 is not valid (left unmapped).

<6>[    7.268890] SELinux:  Context u:object_r:wpa_data_file:s0 is not valid (left unmapped).

<6>[    7.283752] SELinux:  Context u:object_r:ota_data_file:s0 is not valid (left unmapped).

<6>[    7.284973] SELinux:  Context u:object_r:ota_package_file:s0 is not valid (left unmapped).

<6>[    7.301574] SELinux:  Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).

<6>[    7.303070] SELinux:  Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).

<5>[    7.663940] bq27541_get_capacity = 100% ret= 100

<5>[    7.665130] bq27541_get_psp status: Full ret= 0x0281

<3>[    8.909179] init: avc:  denied  { set } for property=sys.usb.config scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service

<6>[    8.909790] adb_release

<6>[    8.910217] mtp_bind_config

<6>[    8.910369] adb_bind_config

<3>[    8.913513] msm_otg msm_otg: Failed notifying 1 charger type to PMIC

<6>[    8.913665] USB fast charging is OFF.

<6>[    8.913726] msm_otg msm_otg: Avail curr from USB = 2

<6>[    8.913848] msm_otg msm_otg: current: 500 -> 2 (mA)

<7>[    8.913940] msm_otg msm_otg: Power Supply doesn't support USB charger

<6>[    8.913940] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received

<7>[    8.914062] peripheral bus suspend

<6>[    8.925476] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:

<7>[    8.925750] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr

<3>[    9.033081] msm_otg msm_otg: Failed notifying 1 charger type to PMIC

<6>[    9.033477] USB fast charging is OFF.

<6>[    9.033691] msm_otg msm_otg: Avail curr from USB = 0

<7>[    9.034088] msm_otg msm_otg: Power Supply doesn't support USB charger

<6>[    9.034271] android_work: android_work: sent uevent USB_STATE=DISCONNECTED

<7>[    9.035339] portsc = 88000a05

<6>[    9.120178] android_work: android_work: sent uevent USB_STATE=CONNECTED

<6>[    9.145812] android_usb gadget: high-speed config #1: android_usb

<3>[    9.145935] msm_otg msm_otg: Failed notifying 1 charger type to PMIC

<6>[    9.146057] USB fast charging is OFF.

<6>[    9.146148] msm_otg msm_otg: Avail curr from USB = 500

<7>[    9.146270] msm_otg msm_otg: Power Supply doesn't support USB charger

<6>[    9.198303] android_work: android_work: sent uevent USB_STATE=CONFIGURED

<6>[    9.713928] mtp_open

<5>[   64.329589] bq27541_get_psp status: Full ret= 0x0281

<5>[   64.330291] bq27541_get_psp status: Full ret= 0x0281

<5>[   64.330932] bq27541_get_psp voltage_now= 4286000 uV

<5>[   64.331604] bq27541_get_capacity = 100% ret= 100

<5>[   64.332244] bq27541_get_psp temperature= 289 (0.1¢XC)

<5>[   64.332916] bq27541_get_psp current_now = -92 mA

<5>[   64.333557] bq27541_get_psp charge_now (compensated) = 3817000 uAh

<5>[   64.334228] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh

<5>[   64.334869] bq27541_get_psp charge_full = 3817000 uAh

<5>[   64.335540] bq27541_get_psp charge_design = 3828000 uAh

<5>[   64.336181] bq27541_get_psp energy_now = 14658000 uWh

<5>[   64.336822] bq27541_get_psp charge_counter = 2000 uWh

<5>[   64.337493] bq27541_get_psp power_now = -394000 uW

<5>[   64.338134] bq27541_get_psp cycle count = 88

<5>[   64.419891] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<5>[   64.420318] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4292000

<5>[   64.421051] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt setting=e8 V=4300mV

<5>[   64.421630] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<5>[   69.044677] bq27541_get_capacity = 100% ret= 100

<5>[   69.045593] bq27541_get_psp status: Full ret= 0x0281

<5>[  124.649688] bq27541_get_psp status: Full ret= 0x0281

<5>[  124.650695] bq27541_get_psp status: Full ret= 0x0281

<5>[  124.651519] bq27541_get_psp voltage_now= 4286000 uV

<5>[  124.652465] bq27541_get_capacity = 100% ret= 100

<5>[  124.653259] bq27541_get_psp temperature= 291 (0.1¢XC)

<5>[  124.654205] bq27541_get_psp current_now = -90 mA

<5>[  124.654998] bq27541_get_psp charge_now (compensated) = 3817000 uAh

<5>[  124.655944] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh

<5>[  124.656738] bq27541_get_psp charge_full = 3817000 uAh

<5>[  124.657684] bq27541_get_psp charge_design = 3828000 uAh

<5>[  124.658477] bq27541_get_psp energy_now = 14658000 uWh

<5>[  124.659301] bq27541_get_psp charge_counter = 4000 uWh

<5>[  124.660247] bq27541_get_psp power_now = -386000 uW

<5>[  124.661041] bq27541_get_psp cycle count = 88

<5>[  124.740386] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<5>[  124.740722] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4286000

<5>[  124.741271] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt setting=e8 V=4300mV

<5>[  124.741729] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<5>[  129.929534] bq27541_get_capacity = 100% ret= 100

<5>[  129.930541] bq27541_get_psp status: Full ret= 0x0281

<5>[  184.809692] bq27541_get_psp status: Full ret= 0x0281

<5>[  184.810699] bq27541_get_psp status: Full ret= 0x0281

<5>[  184.811523] bq27541_get_psp voltage_now= 4285000 uV

<5>[  184.812469] bq27541_get_capacity = 100% ret= 100

<5>[  184.813262] bq27541_get_psp temperature= 293 (0.1¢XC)

<5>[  184.814208] bq27541_get_psp current_now = -91 mA

<5>[  184.815002] bq27541_get_psp charge_now (compensated) = 3817000 uAh

<5>[  184.815948] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh

<5>[  184.816741] bq27541_get_psp charge_full = 3817000 uAh

<5>[  184.817687] bq27541_get_psp charge_design = 3828000 uAh

<5>[  184.818481] bq27541_get_psp energy_now = 14658000 uWh

<5>[  184.819305] bq27541_get_psp charge_counter = 5000 uWh

<5>[  184.820037] bq27541_get_psp power_now = -390000 uW

<5>[  184.820709] bq27541_get_psp cycle count = 88

<5>[  184.900695] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73

<5>[  184.901062] smb345_charger: [smb345_config_thermal_charging] temp=29, volt=4286000

<5>[  184.901611] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt setting=e8 V=4300mV

<5>[  184.902069] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable

<5>[  191.041015] bq27541_get_capacity = 100% ret= 100

<5>[  191.042022] bq27541_get_psp status: Full ret= 0x0281