Advertisement
Guest User

Untitled

a guest
Nov 8th, 2016
163
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.12 KB | None | 0 0
  1. [ 10.565567] ======== bcm_wlan_set_plat_data ========
  2. [ 10.565622] bcm_wlan_get_oob_irq enter.
  3. [ 10.565783] gpio [202] map to virq [10] ok
  4. [ 10.565802] host_oob_irq: 10
  5. [ 10.565817] host_oob_irq_flags=0x414
  6. [ 10.565840] dhd_wifi_platform_load: Enter
  7. [ 10.565912] Power-up adapter 'DHD generic adapter'
  8. [ 10.565940] wifi_platform_set_power = 1
  9. [ 10.565958] ======== PULL WL_REG_ON HIGH! ========
  10. [ 10.565986] [wifi_pm]: set wl_reg_on 0 !
  11. [ 10.681626] vmouse_input_dev_open
  12. [ 10.740936] systemd[1]: Started Journal Service.
  13. [ 10.760316] vmouse_input_dev_close
  14. [ 11.016992] [wifi_pm]: set wl_reg_on 1 !
  15. [ 11.480921] systemd-journald[237]: Received request to flush runtime journal from PID 1
  16. [ 11.592811] gmac0: probed
  17. [ 11.593331] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
  18. [ 12.160141] wifi_platform_bus_enumerate device present 1
  19. [ 12.160170] ======== Card detection to detect SDIO card! ========
  20. [ 14.160250] failed to power up DHD generic adapter, 3 retry left
  21. [ 14.176660] wifi_platform_set_power = 0
  22. [ 14.176693] ======== PULL WL_REG_ON LOW! ========
  23. [ 14.176720] wifi_platform_bus_enumerate device present 0
  24. [ 14.176739] ======== Card detection to remove SDIO card! ========
  25. [ 14.176803] wifi_platform_set_power = 1
  26. [ 14.176824] ======== PULL WL_REG_ON HIGH! ========
  27. [ 14.176851] [wifi_pm]: set wl_reg_on 0 !
  28. [ 14.180479] mmc1: card 0001 removed
  29. [ 14.180978] [mmc]: sdc1 power_supply is null
  30. [ 14.394371] [wifi_pm]: set wl_reg_on 1 !
  31. [ 14.900184] wifi_platform_bus_enumerate device present 1
  32. [ 14.900219] ======== Card detection to detect SDIO card! ========
  33. [ 14.901946] [mmc]: sdc1 power_supply is null
  34. [ 14.967200] mmc1: new high speed SDIO card at address 0001
  35. [ 16.590286] PHY: gmac0-0:00 - Link is Up - 100/Full
  36. [ 16.900144] failed to power up DHD generic adapter, 2 retry left
  37. [ 16.916562] wifi_platform_set_power = 0
  38. [ 16.916592] ======== PULL WL_REG_ON LOW! ========
  39. [ 16.916611] wifi_platform_bus_enumerate device present 0
  40. [ 16.916628] ======== Card detection to remove SDIO card! ========
  41. [ 16.916688] wifi_platform_set_power = 1
  42. [ 16.916713] ======== PULL WL_REG_ON HIGH! ========
  43. [ 16.916732] [wifi_pm]: set wl_reg_on 0 !
  44. [ 16.917685] mmc1: card 0001 removed
  45. [ 16.918185] [mmc]: sdc1 power_supply is null
  46. [ 17.116815] [wifi_pm]: set wl_reg_on 1 !
  47. [ 17.620157] wifi_platform_bus_enumerate device present 1
  48. [ 17.620190] ======== Card detection to detect SDIO card! ========
  49. [ 17.621904] [mmc]: sdc1 power_supply is null
  50. [ 17.677386] mmc1: new high speed SDIO card at address 0001
  51. [ 19.620074] failed to power up DHD generic adapter, 1 retry left
  52. [ 19.636275] wifi_platform_set_power = 0
  53. [ 19.636288] ======== PULL WL_REG_ON LOW! ========
  54. [ 19.636298] wifi_platform_bus_enumerate device present 0
  55. [ 19.636307] ======== Card detection to remove SDIO card! ========
  56. [ 19.636338] wifi_platform_set_power = 1
  57. [ 19.636346] ======== PULL WL_REG_ON HIGH! ========
  58. [ 19.636356] [wifi_pm]: set wl_reg_on 0 !
  59. [ 19.636584] mmc1: card 0001 removed
  60. [ 19.636855] [mmc]: sdc1 power_supply is null
  61. [ 19.836409] [wifi_pm]: set wl_reg_on 1 !
  62. [ 20.340099] wifi_platform_bus_enumerate device present 1
  63. [ 20.340111] ======== Card detection to detect SDIO card! ========
  64. [ 20.341717] [mmc]: sdc1 power_supply is null
  65. [ 20.396872] mmc1: new high speed SDIO card at address 0001
  66. [ 22.330121] eth0: no IPv6 routers present
  67. [ 22.340287] failed to power up DHD generic adapter, 0 retry left
  68. [ 22.356818] wifi_platform_set_power = 0
  69. [ 22.356859] ======== PULL WL_REG_ON LOW! ========
  70. [ 22.356897] wifi_platform_bus_enumerate device present 0
  71. [ 22.356931] ======== Card detection to remove SDIO card! ========
  72. [ 22.357026] failed to power up DHD generic adapter, max retry reached**
  73. [ 22.357136] unregister wifi platform drivers
  74. [ 22.357175] wifi_platform_bus_enumerate device present 0
  75. [ 22.357209] ======== Card detection to remove SDIO card! ========
  76. [ 22.357294] dhd_module_init: Failed to load the driver, try cnt 3
  77. [ 22.357442] ======== bcm_wlan_set_plat_data ========
  78. [ 22.357489] bcm_wlan_get_oob_irq enter.
  79. [ 22.357537] gpio [202] map to virq [10] ok
  80. [ 22.357567] host_oob_irq: 10
  81. [ 22.357594] host_oob_irq_flags=0x414
  82. [ 22.357624] dhd_wifi_platform_load: Enter
  83. [ 22.357667] mmc1: card 0001 removed
  84. [ 22.357705] Power-up adapter 'DHD generic adapter'
  85. [ 22.357742] wifi_platform_set_power = 1
  86. [ 22.357772] ======== PULL WL_REG_ON HIGH! ========
  87. [ 22.357807] [wifi_pm]: set wl_reg_on 0 !
  88. [ 22.358576] [mmc]: sdc1 power_supply is null
  89. [ 22.562760] [wifi_pm]: set wl_reg_on 1 !
  90. [ 23.070085] wifi_platform_bus_enumerate device present 1
  91. [ 23.070100] ======== Card detection to detect SDIO card! ========
  92. [ 23.071776] [mmc]: sdc1 power_supply is null
  93. [ 23.131881] mmc1: new high speed SDIO card at address 0001
  94. [ 25.070313] failed to power up DHD generic adapter, 3 retry left
  95. [ 25.086854] wifi_platform_set_power = 0
  96. [ 25.086895] ======== PULL WL_REG_ON LOW! ========
  97. [ 25.086932] wifi_platform_bus_enumerate device present 0
  98. [ 25.086966] ======== Card detection to remove SDIO card! ========
  99. [ 25.087067] wifi_platform_set_power = 1
  100. [ 25.087099] ======== PULL WL_REG_ON HIGH! ========
  101. [ 25.087134] [wifi_pm]: set wl_reg_on 0 !
  102. [ 25.087763] mmc1: card 0001 removed
  103. [ 25.088690] [mmc]: sdc1 power_supply is null
  104. [ 25.287290] [wifi_pm]: set wl_reg_on 1 !
  105. [ 25.790073] wifi_platform_bus_enumerate device present 1
  106. [ 25.790092] ======== Card detection to detect SDIO card! ========
  107. [ 25.791740] [mmc]: sdc1 power_supply is null
  108. [ 25.848340] mmc1: new high speed SDIO card at address 0001
  109. [ 27.790080] failed to power up DHD generic adapter, 2 retry left
  110. [ 27.806289] wifi_platform_set_power = 0
  111. [ 27.806303] ======== PULL WL_REG_ON LOW! ========
  112. [ 27.806312] wifi_platform_bus_enumerate device present 0
  113. [ 27.806321] ======== Card detection to remove SDIO card! ========
  114. [ 27.806353] wifi_platform_set_power = 1
  115. [ 27.806360] ======== PULL WL_REG_ON HIGH! ========
  116. [ 27.806370] [wifi_pm]: set wl_reg_on 0 !
  117. [ 27.806577] mmc1: card 0001 removed
  118. [ 27.806847] [mmc]: sdc1 power_supply is null
  119. [ 28.006460] [wifi_pm]: set wl_reg_on 1 !
  120. [ 28.510070] wifi_platform_bus_enumerate device present 1
  121. [ 28.510090] ======== Card detection to detect SDIO card! ========
  122. [ 28.511686] [mmc]: sdc1 power_supply is null
  123. [ 28.567257] mmc1: new high speed SDIO card at address 0001
  124. [ 30.510252] failed to power up DHD generic adapter, 1 retry left
  125. [ 30.526775] wifi_platform_set_power = 0
  126. [ 30.526814] ======== PULL WL_REG_ON LOW! ========
  127. [ 30.526852] wifi_platform_bus_enumerate device present 0
  128. [ 30.526887] ======== Card detection to remove SDIO card! ========
  129. [ 30.526971] wifi_platform_set_power = 1
  130. [ 30.527002] ======== PULL WL_REG_ON HIGH! ========
  131. [ 30.527037] [wifi_pm]: set wl_reg_on 0 !
  132. [ 30.527648] mmc1: card 0001 removed
  133. [ 30.528560] [mmc]: sdc1 power_supply is null
  134. [ 30.727248] [wifi_pm]: set wl_reg_on 1 !
  135. [ 31.230130] wifi_platform_bus_enumerate device present 1
  136. [ 31.230143] ======== Card detection to detect SDIO card! ========
  137. [ 31.231825] [mmc]: sdc1 power_supply is null
  138. [ 31.291747] mmc1: new high speed SDIO card at address 0001
  139. [ 33.230397] failed to power up DHD generic adapter, 0 retry left
  140. [ 33.246933] wifi_platform_set_power = 0
  141. [ 33.246975] ======== PULL WL_REG_ON LOW! ========
  142. [ 33.247013] wifi_platform_bus_enumerate device present 0
  143. [ 33.247047] ======== Card detection to remove SDIO card! ========
  144. [ 33.247135] failed to power up DHD generic adapter, max retry reached**
  145. [ 33.247256] unregister wifi platform drivers
  146. [ 33.247294] wifi_platform_bus_enumerate device present 0
  147. [ 33.247327] ======== Card detection to remove SDIO card! ========
  148. [ 33.247419] dhd_module_init: Failed to load the driver, try cnt 2
  149. [ 33.247568] ======== bcm_wlan_set_plat_data ========
  150. [ 33.247616] bcm_wlan_get_oob_irq enter.
  151. [ 33.247665] gpio [202] map to virq [10] ok
  152. [ 33.247696] host_oob_irq: 10
  153. [ 33.247723] host_oob_irq_flags=0x414
  154. [ 33.247752] dhd_wifi_platform_load: Enter
  155. [ 33.247785] mmc1: card 0001 removed
  156. [ 33.247874] Power-up adapter 'DHD generic adapter'
  157. [ 33.247912] wifi_platform_set_power = 1
  158. [ 33.247942] ======== PULL WL_REG_ON HIGH! ========
  159. [ 33.247977] [wifi_pm]: set wl_reg_on 0 !
  160. [ 33.248700] [mmc]: sdc1 power_supply is null
  161. [ 33.448425] [wifi_pm]: set wl_reg_on 1 !
  162. [ 33.950332] wifi_platform_bus_enumerate device present 1
  163. [ 33.950379] ======== Card detection to detect SDIO card! ========
  164. [ 33.952170] [mmc]: sdc1 power_supply is null
  165. [ 34.011528] mmc1: new high speed SDIO card at address 0001
  166. [ 35.950301] failed to power up DHD generic adapter, 3 retry left
  167. [ 35.966838] wifi_platform_set_power = 0
  168. [ 35.966878] ======== PULL WL_REG_ON LOW! ========
  169. [ 35.966916] wifi_platform_bus_enumerate device present 0
  170. [ 35.966950] ======== Card detection to remove SDIO card! ========
  171. [ 35.967043] wifi_platform_set_power = 1
  172. [ 35.967073] ======== PULL WL_REG_ON HIGH! ========
  173. [ 35.967109] [wifi_pm]: set wl_reg_on 0 !
  174. [ 35.967728] mmc1: card 0001 removed
  175. [ 35.968646] [mmc]: sdc1 power_supply is null
  176. [ 36.168528] [wifi_pm]: set wl_reg_on 1 !
  177. [ 36.670196] wifi_platform_bus_enumerate device present 1
  178. [ 36.670242] ======== Card detection to detect SDIO card! ========
  179. [ 36.672026] [mmc]: sdc1 power_supply is null
  180. [ 36.732011] mmc1: new high speed SDIO card at address 0001
  181. [ 38.670086] failed to power up DHD generic adapter, 2 retry left
  182. [ 38.686280] wifi_platform_set_power = 0
  183. [ 38.686291] ======== PULL WL_REG_ON LOW! ========
  184. [ 38.686300] wifi_platform_bus_enumerate device present 0
  185. [ 38.686307] ======== Card detection to remove SDIO card! ========
  186. [ 38.686336] wifi_platform_set_power = 1
  187. [ 38.686343] ======== PULL WL_REG_ON HIGH! ========
  188. [ 38.686352] [wifi_pm]: set wl_reg_on 0 !
  189. [ 38.686550] mmc1: card 0001 removed
  190. [ 38.686785] [mmc]: sdc1 power_supply is null
  191. [ 38.886427] [wifi_pm]: set wl_reg_on 1 !
  192. [ 39.390068] wifi_platform_bus_enumerate device present 1
  193. [ 39.390089] ======== Card detection to detect SDIO card! ========
  194. [ 39.391688] [mmc]: sdc1 power_supply is null
  195. [ 39.446852] mmc1: new high speed SDIO card at address 0001
  196. [ 41.390230] failed to power up DHD generic adapter, 1 retry left
  197. [ 41.406765] wifi_platform_set_power = 0
  198. [ 41.406805] ======== PULL WL_REG_ON LOW! ========
  199. [ 41.406843] wifi_platform_bus_enumerate device present 0
  200. [ 41.406877] ======== Card detection to remove SDIO card! ========
  201. [ 41.406965] wifi_platform_set_power = 1
  202. [ 41.406996] ======== PULL WL_REG_ON HIGH! ========
  203. [ 41.407031] [wifi_pm]: set wl_reg_on 0 !
  204. [ 41.407637] mmc1: card 0001 removed
  205. [ 41.408560] [mmc]: sdc1 power_supply is null
  206. [ 41.607302] [wifi_pm]: set wl_reg_on 1 !
  207. [ 42.110231] wifi_platform_bus_enumerate device present 1
  208. [ 42.110276] ======== Card detection to detect SDIO card! ========
  209. [ 42.112063] [mmc]: sdc1 power_supply is null
  210. [ 42.171507] mmc1: new high speed SDIO card at address 0001
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement