API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 24th, 2019
190
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 68.02 KB | None | 0 0
raw download clone embed print report
  1. hikey960 boarid:5301 xloader use UART6
  2. scsysstat_value[0].
  3. clear reset source
  4. last_keypoint0,reboot_type0
  5. secdbg not DCU.
  6. SecDbgVer exit
  7.  
  8. xloader chipid is: 0x36600110, start at 331ms.
  9. Build Date: Sep 19 2017, 15:34:09
  10. [clock_init] ++
  11. hikey960 [hikey960_clk_init]
  12. hi3660 [clk_setup]
  13. [clock_init] --
  14. storage type is UFS
  15. ufs retry: 6 count v_tx:0 v_rx:0
  16. ufs set v_tx:0 v_rx:0
  17. Hikey960[5301] no need avs_init.
  18. ddr ft:0xf20332a3,mode:1 target:4
  19. UceLdOk
  20. density: 0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008,0x00080008
  21. ddr info 0x00000401
  22. 400M
  23. 685M
  24. 1067M
  25. C0R,V0x0000002f e:66
  26. C1R,V0x0000002f e:113
  27. C2R,V0x0000002e e:66
  28. C3R,V0x00000031 e:66
  29. C0R,V0x00000030 e:66
  30. C1R,V0x00000030 e:66
  31. C2R,V0x0000002f e:66
  32. C3R,V0x00000032 e:66
  33. C0R,V0x00000031 e:66
  34. C1R,V0x00000031 e:66
  35. C2R,V0x00000030 e:66
  36. C3R,V0x00000033 e:66
  37. C0R,V0x00000032 e:66
  38. C1R,V0x00000032 e:65
  39. C2R,V0x00000031 e:66
  40. C3R,V0x00000034 e:65
  41. C0R,V0x00000033 e:65
  42. C1R,V0x00000033 e:65
  43. C2R,V0x00000032 e:65
  44. C3R,V0x00000035 e:65
  45. C1R,V0x0000002f e:66
  46. C2R,V0x0000002f e:113
  47. C0R,V0x00000031 e:66
  48. C1R,V0x00000030 e:66
  49. C2R,V0x00000030 e:66
  50. C3R,V0x00000030 e:66
  51. C0R,V0x00000032 e:66
  52. C1R,V0x00000031 e:66
  53. C2R,V0x00000031 e:66
  54. C3R,V0x00000031 e:66
  55. C0R,V0x00000033 e:66
  56. C1R,V0x00000032 e:65
  57. C2R,V0x00000032 e:65
  58. C3R,V0x00000032 e:66
  59. C0R,V0x00000034 e:65
  60. C1R,V0x00000033 e:65
  61. C2R,V0x00000033 e:65
  62. C3R,V0x00000033 e:65
  63. 1244M
  64. 1866M
  65. C2R,V0x00000013 e:193
  66. C2R,V0x00000014 e:66
  67. C0R,V0x00000015 e:66
  68. C2R,V0x00000015 e:66
  69. C0R,V0x00000016 e:66
  70. C2R,V0x00000016 e:66
  71. C0R,V0x00000017 e:66
  72. C1R,V0x00000017 e:66
  73. C2R,V0x00000017 e:66
  74. C3R,V0x00000017 e:66
  75. C2R,V0x00000015 e:66
  76. C2R,V0x00000016 e:66
  77. C3R,V0x00000016 e:66
  78. C1R,V0x00000017 e:113
  79. C2R,V0x00000017 e:66
  80. C3R,V0x00000017 e:66
  81. pack0Idx0Dcc:0
  82. pack1Idx0Dcc:0
  83. pack2Idx0Dcc:0
  84. pack3Idx0Dcc:0
  85. iomcu_subsys_init
  86. boot_c0 PROFILE 4
  87. slave0 irq0:0x00000004
  88. slave1 irq0:0x00000004
  89. main: ******** Fastboot for Kirin *****************
  90. main: ******** Build Date: Jun 2 2017, 17:34:24 **
  91. main: ******** Fastboot start at 1820 ms **********
  92.  
  93. main: print soc_id computed in xloader phase, is below:
  94. main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
  95. main: 00000000 main: 00000000 main: 00000000 main: 00000000 main:
  96. led_alwayson: can't get dtb operators
  97. bbox: bbox_register_module_ops success.
  98. bfm: : >>>>>enter bfm_init
  99. bfm: : [disable_boot_fail_system] boot_fail_system state is 0
  100. clock: PLL Stat
  101. clock: PLL2 ctrl0=0x04909604,ctrl1=0x02000000
  102. clock: PLL2 acpu en_stat:0x00000008, acpu gt_stat:0x00040000
  103. clock: PLL2 final en_stat:0x00100000, final gt_stat:0x00020000
  104. clock: PLL3 ctrl0=0x04904005,ctrl1=0x07000000
  105. clock: PLL3 acpu en_stat:0x00000000, acpu gt_stat:0x00000000
  106. clock: PLL3 final en_stat:0x00200000, final gt_stat:0x00040000
  107. clock: clock init OK
  108. ufs: ufs start on platform[36600110]ufs: ufs current mode: 0x00000011
  109. ufs: ufs current gear: 0x00000003
  110. ufs: ufs mphy reg 0x4A = 0x00000000
  111. ufs: bUD0BaseOffset: 0x00000010, bUDConfigPLength: 0x00000010
  112. ufs: UFS device manufacturerid = 0x000001ad
  113. ufs: UFS device: H****
  114. bfm: : >>>>>enter set_boot_stage
  115. bfm: : bootStageCode is 0x02000001, mntnStageCode is 27
  116. bfm: : <<<<<exit set_boot_stage.
  117. storage: emmc_ops invalid
  118. storage: storage type is UFS
  119. bfm: : bfm system is disabled!
  120. storage: emmc_init: BL2_STAGE_EMMC_OK is 33554435!
  121. bfm: : >>>>>enter set_boot_stage
  122. bfm: : bootStageCode is 0x02000003, mntnStageCode is 29
  123. bfm: : <<<<<exit set_boot_stage.
  124. bfm: : >>>>>enter set_boot_stage
  125. bfm: : bootStageCode is 0x02010001, mntnStageCode is 30
  126. bfm: : <<<<<exit set_boot_stage.
  127. ddr: current logic version is lpddr4 verison !!!
  128. ddr: ddr size is 4096MB
  129. bbox: register modid [0x81fff200]
  130. bbox: register exception succeed.
  131. bbox: register modid [0x81fff202]
  132. bbox: register exception succeed.
  133. bbox: register modid [0x81fff20b]
  134. bbox: register exception succeed.
  135. watchdog: Enable watchdog start
  136. boardid: [BDID]boardid: 5301
  137. gpio: hikey960_gpio_init: GPIO 46 202 206 ouput low, GPIO 219 pullup.
  138. load_kernel: register_update_dt_ops for usb!
  139. secureboot: Enter secboot_init: set pll efuse flag!
  140. secureboot: pll efuse flag has been succ set!bbox: register modid [0x81fff20a]
  141. bbox: register exception succeed.
  142. secureboot: SECBOOT_DEV_INFO_DADDR = 0x1d7fff00, SECBOOT_DEV_INFO_SIZE = 0x00000040!
  143. dtimage: number of dtb = 1
  144. dtimage: =========uncompress_dtb_addr=[0x16f00000],====vrl_addr=[0x1b0e64e0]====
  145. dtimage: [device_tree_get_dtb_entry:215] Verify Not Exist
  146. dtimage: fdt_init success!
  147. dtimage: -----can not find hisilicon,fastboot node by compatible
  148. dtimage: -----can not find hisilicon,fastboot node by compatible
  149. load_kernel: register_update_dt_ops for led!
  150. reboot_reason: scsysstat_value is 0x00000000
  151. pmu: can not find fastboot,hisi-pmic-mntn node1
  152. pmu: pmu_property_read_u32 fastboot,hisi-pmic-mntn, hisilicon,data-width, failed
  153. pmu: pmu_mntn_record_dts_parse failed!
  154. bbox: save_tempbuffer_to_loop_area():727:storage_read fail[-1]
  155. reboot_reason: reboot_reason is AP_S_COLDBOOT
  156. reboot_reason: clear_reset_source in!
  157. reboot_reason: tmp =0x0effcc70
  158. dtimage: -----can not find fastboot,charger node by compatible
  159. power: get_chargerIC_type: getU32byCompatible fastboot,charger, hw_charger_type failed!
  160. dtimage: -----can not find fastboot,coul node by compatible
  161. power: get_coul_type: get coul_type failed!
  162. power: get coul_type failed!
  163. power: hi6421v500 register coulometer ops fail!
  164. dtimage: -----can not find huawei,hisi_bci_battery node by compatible
  165. no_module: [hi6523_get_config_info]: can't get battery board type
  166. dtimage: -----can not find fastboot,charger node by compatible
  167. no_module: get hi6523 i2c reg num fail!
  168. dtimage: -----can not find fastboot,charger node by compatible
  169. no_module: [hi6523_start_charging_by_init_params]: get ichrg_pre_limit fail
  170. dtimage: -----can not find huawei,hi6523_charger node by compatible
  171. no_module: [hi6523_start_charging_by_init_params]: get reg fail
  172. dtimage: -----can not find fastboot,buckboost node by compatible
  173. max77813: get_buckboost_type: getU32byCompatible fastboot,buckboost, hw_buckboost_type failed!
  174. max77813: get dts buckboost type fail!
  175. cpu_buck: pmu type3 not registered
  176. cpu_buck: Bad cpu buck info:1
  177. bbox: Could not find path /rdr
  178. bbox: Could not find status property.
  179. mntn: tele_mntn_stat_point_init: can not bbox_ops !
  180. dtimage: -----can not find hisilicon,fastboot node by compatible
  181. mntn: [tele_mntn_m3_wdt_config]: getU32byCompatible(hisilicon,fastboot, lpm3-board-type) error!
  182. mntn: mntn init
  183. mntndump: enable_reserved_ddr_dts: Could not find path /reserved-memory/mntndump
  184. mntndump: mntn_dump_init failed
  185. mntndump: get_mntn_dump_addr:mid[2] is not init
  186. mntn: kernel dump is not available
  187. mntn: reboot_type is 0
  188. mntn:
  189. no need to dump_mem...
  190. mntn: enter [registe_pstore_ramoops_dump]
  191. mntndump: get_mntn_dump_addr:mid[5] is not init
  192. mntn: no mdump_pstore info
  193. mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
  194. uart_cfg: [MNTN]:Could not find node.
  195. uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
  196. uart_cfg: module_idx 2, uart_no 6
  197. uart_cfg: odule_idx 11, uart_no 15
  198. uart_cfg: module_idx 2, uart_no 6
  199. uart_cfg: getU32byCompatible(hisilicon,fastboot, uart-board-type) error!
  200. uart_cfg: boardid: 5301 use uart port: 6
  201. pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
  202. ddr: current logic version is lpddr4 verison !!!
  203. dtimage: -----can not find huawei,lcd_panel_type node by compatible
  204. display: [display]get_detect_type: huawei,lcd_panel_type: get detect_type fail
  205. display: lcd:no lcd detect_type
  206. no_module: [LOGO] get_logo_buffer_from_dtsi: Could not find path /reserved-memory/logo-buffer.
  207. no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
  208. display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
  209. display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
  210. bfm: : >>>>>enter set_boot_stage
  211. bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
  212. bfm: : <<<<<exit set_boot_stage.
  213. dtimage: -----can not find huawei,lcd_panel_type node by compatible
  214. display: [display]get_dts_value: can not get huawei,lcd_panel_type, bl_bus_id=4!
  215. dtimage: -----can not find ti,lm36923 node by compatible
  216. display: [display]get_dts_value: can not get ti,lm36923, support=0!
  217. display: get lm36923_support failed!
  218. Audio_codec: [audio]:Could not find "hisilicon,codec-controller" node.
  219. load_teeos: can not find fb node fingerprint
  220. load_teeos: failed to find fb node ese_config
  221. display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
  222. bfm: : >>>>>enter set_boot_stage
  223. bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
  224. bfm: : <<<<<exit set_boot_stage.
  225. misc: [get_misc_message] mmc_read failed
  226. preboot: [fastboot]: check_unlock_misc_info, line:1273 :get misc message failed.
  227. preboot: [fastboot]: check_powerkey_misc_info, line:1242 :!!!!CAUTION!!!!:get keypad_operator FAIL!
  228. preboot: [fastboot]: check_volumekey_state, line:943 :!!!!CAUTION!!!!:get keypad_operator FAIL!
  229. misc: [get_misc_message] mmc_read failed
  230. preboot: [fastboot]: comm_read_misc_cmd, line:501 :get misc message failed.
  231. power: [check_battery_present]:g_coulometer_ops is null
  232. power: [wait_coulometer_work]:g_coulometer_ops is null
  233. power: [get_device_power_state]:initial coulometer fail!
  234. preboot: [fastboot]: preboot_init, line:1480 :Hikey960 stub: set bootmode to normal_mode!
  235. rescue: ^^^^^^^^^[rescue_init] ok !
  236. usbloader: bootmode is 1
  237. bfm: : >>>>>enter set_boot_stage
  238. bfm: : bootStageCode is 0x02010004, mntnStageCode is 33
  239. bfm: : <<<<<exit set_boot_stage.
  240. load_lpm3: start lpm3 loading
  241. load_lpm3: load lpmcu image
  242. tm: cluster0 prof0 trim result check fail:0,00000000,00000000
  243. tm: cluster0 prof1 trim result check fail:0,00000000,00000000
  244. tm: cluster0 prof2 trim result check fail:0,00000000,00000000
  245. tm: cluster0 prof3 trim result check fail:0,00000000,00000000
  246. tm: cluster0 prof4 trim result check fail:0,00000000,00000000
  247. tm: cluster1 prof0 trim result check fail:0,00000000,00000000
  248. tm: cluster1 prof1 trim result check fail:0,00000000,00000000
  249. tm: cluster1 prof2 trim result check fail:0,00000000,00000000
  250. tm: cluster1 prof3 trim result check fail:0,00000000,00000000
  251. tm: cluster1 prof4 trim result check fail:0,00000000,00000000
  252. tm: cluster1 prof5 trim result check fail:0,00000000,00000000
  253. tm: cluster2 prof0 trim result check fail:0,00000000,00000000
  254. tm: cluster2 prof1 trim result check fail:0,00000000,00000000
  255. tm: cluster2 prof2 trim result check fail:0,00000000,00000000
  256. tm: cluster2 prof3 trim result check fail:0,00000000,00000000
  257. tm: cluster2 prof4 trim result check fail:0,00000000,00000000
  258. tm: cluster2 prof5 trim result check fail:0,00000000,00000000
  259. tm: cluster2 prof6 trim result check fail:0,00000000,00000000
  260. tm: cluster2 prof7 trim result check fail:0,00000000,00000000
  261. tm: C0
  262. tm: p4
  263. tm: path adjust:00000018
  264. tm: svfd2:00000012
  265. tm: svfd1:00000012
  266. tm: svfd0:00000012
  267. tm: p3
  268. tm: svfd2:00000012
  269. tm: svfd1:00000012
  270. tm: svfd0:00000012
  271. tm: C1
  272. tm: p4
  273. tm: path adjust:00000018
  274. tm: svfd2:00000013
  275. tm: svfd1:00000013
  276. tm: svfd0:00000013
  277. tm: p3
  278. tm: svfd2:00000017
  279. tm: svfd1:00000017
  280. tm: svfd0:00000017
  281. tm: p2
  282. tm: svfd2:0000001a
  283. tm: svfd1:0000001a
  284. tm: svfd0:0000001a
  285. tm: p1
  286. tm: svfd2:0000001a
  287. tm: svfd1:0000001a
  288. tm: svfd0:0000001a
  289. load_lpm3: do_lpnv_acpufreq_papa_option
  290. load_lpm3: modify_pmu6422_para no bugfix
  291. load_lpm3: cos_upgrade_exception_process storage_read fail!
  292. load_lpm3: lpmcu_hisee_para_init: cos_upgrade_exception_process() fail.
  293. load_lpm3: LPM3 load success 0x89c80000
  294. load_lpm3: SCPERRSTSTAT4_SEC fffffffc
  295. load_lpm3: SCOCBCRSTCTRL 00000000
  296. load_lpm3: SCPERCLKEN2 43e00001
  297. load_lpm3: SCPERSTAT2 c7fa4c4f
  298. load_lpm3: SCOCBCSTAT 00007250
  299. load_lpm3: AOCLK_CTRL 00000725
  300. load_lpm3: SCPERSTAT3 000014c7
  301. load_lpm3: SCOCBCSTAT 00007250
  302. load_lpm3: AOCLK_CTRL 00000725
  303. load_lpm3: AOCLK_CTRL 00000225
  304. load_lpm3: CFG_M3_RST_STA 00000000
  305. load_lpm3: load ocbc success!
  306. load_kernel: 0xC5 = 00000032
  307. load_kernel: 0xCC = 00000003
  308. bfm: : bfm system is disabled!
  309. load_kernel: load_kernel CONFIG_WITHOUT_SECURE_OS is open
  310. bfm: : >>>>>enter set_boot_stage
  311. bfm: : bootStageCode is 0x02010005, mntnStageCode is 34
  312. bfm: : <<<<<exit set_boot_stage.
  313. bfm: : bfm system is disabled!
  314. load_kernel: is_system_damaged, the system verify is 1 in nvme!
  315. mntn_err: can not get gui_ops!
  316. dtimage: -----can not find gpio-leds_v2 node by compatible
  317. led: ERROR: Cannot update gpio-leds_v2 info
  318. load_kernel: update dt for led err
  319. load_kernel: update dt for led suc
  320. usb: [usb]usb update hisilicon,gpio_hubv2 info success
  321. load_kernel: update dt for usb suc
  322. load_kernel: Hikey960: Enable all ip regulator
  323. pmu_ip: Hikey960:switch from PPLL0 to PPLL3
  324. pmu_ip: Hikey960:Enable ispfunc
  325. pmu_ip: Hikey960:Enable clock-gating
  326. pmu_ip: [regulator_power_all_enable] all IP regulator is power on!
  327. load_kernel: set ISP_CORE_CTRL_S to unsec, val = 0x00000007
  328. load_kernel: set ISP_SUB_CTRL_S to unsec, val = 0x0000000f
  329. bfm: : >>>>>enter set_boot_stage
  330. bfm: : bootStageCode is 0x02010006, mntnStageCode is 35
  331. bfm: : <<<<<exit set_boot_stage.
  332. load_kernel: __get_cmdline: can not get audio_codec_ops!
  333. power: [get_coulometer_nv_address]:g_coulometer_ops is null
  334. power: [get_battery_voltage]:g_coulometer_ops is null
  335. display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
  336. cmdline: can not get display_info!
  337. display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
  338. cmdline: can not get display_info!
  339. display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
  340. pasr: info: ddr_die=2048M@0M ddr_die=2048M@2048M
  341. cmdline: create_last_bootup_keypoint_cmdline,last_bootup_keypoint is invalid
  342. cmdline: g_memdump_addr is 0
  343. dtimage: -----can not find hisilicon,fastboot node by compatible
  344. cmdline: bsp_need_loadmodem: getU32byCompatible hisilicon,fastboot, is_fpga failed!
  345. cmdline: [ddr]: cmdline add ddr_density 0x00000002!
  346. no_module: create_mdmlog_cmdline: ret = 0 or nve bit[0] = 48, would't create cmdline!!
  347. display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
  348. cmdline: can not get display_info!
  349. reboot_reason: set_reboot_type is 0x000000ff.
  350. dtimage: -----can not find hisilicon,fastboot node by compatible
  351. mntn: [mntnops_before_boot_kernel]: getU32byCompatible error!
  352. mntn: apwatchdog_status_is_ok: cannot find amba/watchdog0, ret=-1
  353. watchdog: Disable watchdog start
  354. ddr: current logic version is lpddr4 verison !!!
  355. mem_cfg: memory section - 0000000000000000 : 0000000080000000 -
  356. mem_cfg: memory section + 0000000000000000 : 0000000080000000 +
  357. mem_cfg: memory section - 0000000080000000 : 0000000080000000 -
  358. mem_cfg: memory section + 0000000080000000 : 0000000060000000 +
  359. mem_cfg: memory section + 0000000200000000 : 0000000020000000 +
  360. mem_cfg: Could not find /reserved-memory/ddr-training2.
  361. mem_cfg: update_bl31_ddrc_info: secmem return wrong,may not a failure.
  362. mem_cfg: update_fastboot_cma_bl31_ddrc_info: base 0x0000000016c00003 size 0x0000000004000000
  363. usbloader: iddq is 0x0000000000000000
  364. usbloader: hpm is 0x0000000000000000
  365. usbloader: dieid is 0x0a0440096f86060ac7aac55220a1051c32c15193
  366. load_kernel: Hikey960: Enable all ip regulator
  367. pmu_ip: Hikey960:switch from PPLL0 to PPLL3
  368. pmu_ip: Hikey960:Enable ispfunc
  369. pmu_ip: Hikey960:Enable clock-gating
  370. pmu_ip: [regulator_power_all_enable] all IP regulator is power on!
  371. load_kernel: set ISP_CORE_CTRL_S to unsec, val = 0x00000007
  372. load_kernel: set ISP_SUB_CTRL_S to unsec, val = 0x0000000f
  373. load_kernel:
  374.  
  375. ----boot time is 3551 ms----
  376.  
  377. load_kernel: boot_from_bl31: boot to trusted firmware. addr=0x00000000
  378. <hit enter to activate fiq debugger>
  379. [ 0.000000] Booting Linux on physical CPU 0x0
  380. [ 0.000000] Linux version 4.9.77-geae6367a9237 (android-build@wpiy7.hot.corp.google.com) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 19 21:54:03 UTC 2018
  381. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  382. [ 0.000000] efi: Getting EFI parameters from FDT:
  383. [ 0.000000] efi: UEFI not found.
  384. [ 0.000000] Ion: base 0xde200000, size is 0x1e00000, node name graphic, heap-name carveout_gralloc namesize 17,[99][97][114][118]
  385. [ 0.000000] Ion: insert heap-name carveout_gralloc
  386. [ 0.000000] OF: reserved mem: initialized node graphic, compatible id hisi_ion
  387. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000016c00000, size 64 MiB
  388. [ 0.000000] OF: reserved mem: initialized node fastboot-cma-mem, compatible id shared-dma-pool
  389. [ 0.000000] cma: Reserved 64 MiB at 0x00000000da000000
  390. [ 0.000000] On node 0 totalpages: 1044415
  391. [ 0.000000] DMA zone: 14271 pages used for memmap
  392. [ 0.000000] DMA zone: 0 pages reserved
  393. [ 0.000000] DMA zone: 913343 pages, LIFO batch:31
  394. [ 0.000000] Normal zone: 2048 pages used for memmap
  395. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  396. [ 0.000000] psci: probing for conduit method from DT.
  397. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  398. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  399. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  400. [ 0.000000] percpu: Embedded 21 pages/cpu @ffffffc21fefc000 s53272 r0 d32744 u86016
  401. [ 0.000000] pcpu-alloc: s53272 r0 d32744 u86016 alloc=21*4096
  402. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  403. [ 0.000000] Detected VIPT I-cache on CPU0
  404. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  405. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028096
  406. [ 0.000000] Kernel command line: androidboot.hardware=hikey960 console=ttyFIQ0 androidboot.console=ttyFIQ0 firmware_class.path=/system/etc/firmware loglevel=15 buildvariant=userdebug androidboot.swtype=normal fastboot_version=DailyBuild_201706021648_FASTBOOT setup_logctl=1 fastbootdmd=0 enter_recovery=0 androidboot.mode=normal low_volt_flag=1 boardid=0x000014b5 normal_reset_type=coldboot ddr_die=2048M@0M ddr_die=2048M@2048M efuse_status=2 androidboot.serialno=6330198053000000 himntn=111111111111111010111111101001100010001 boot_slice=0x0001a3fa reboot_reason=AP_S_COLDBOOT recovery_update=0 userlock=locked bootlock=unlocked hw_bfm_enable=0 ddr_density=2 swiotlb=2 mdmreglogbase=0x00000000 mdmreglogsize=0x00000000 modem_socp_enable=0 androidboot.hardware=HiKey960 androidboot.veritymode=enforcing androidboot.verifiedbootstate=ORANGE ufs_product_name=hB8aL1 format_data=1 cpu_buck_reg=0x;; androidboot.ddrsize=4 kce_status=1 console=ttyAMA6,115200
  407. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  408. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  409. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  410. [ 0.000000] software IO TLB [mem 0xde1bf000-0xde1ff000] (0MB) mapped at [ffffffc0de1bf000-ffffffc0de1fefff]
  411. [ 0.000000] Memory: 3903324K/4177660K available (12988K kernel code, 1318K rwdata, 3848K rodata, 1152K init, 995K bss, 143264K reserved, 131072K cma-reserved)
  412. [ 0.000000] Virtual kernel memory layout:
  413. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  414. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  415. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008d30000 ( 12992 KB)
  416. [ 0.000000] .rodata : 0xffffff8008d30000 - 0xffffff8009100000 ( 3904 KB)
  417. [ 0.000000] .init : 0xffffff8009100000 - 0xffffff8009220000 ( 1152 KB)
  418. [ 0.000000] .data : 0xffffff8009220000 - 0xffffff8009369a00 ( 1319 KB)
  419. [ 0.000000] .bss : 0xffffff8009369a00 - 0xffffff800946294c ( 996 KB)
  420. [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
  421. [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  422. [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  423. [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08800000 ( 136 MB actual)
  424. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc220000000 ( 8704 MB)
  425. [ 0.000000] Preemptible hierarchical RCU implementation.
  426. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  427. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  428. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
  429. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  430. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 1.92MHz (virt).
  431. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
  432. [ 0.000005] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
  433. [ 0.000101] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
  434. [ 0.000750] Console: colour dummy device 80x25
  435. [ 0.000787] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
  436. [ 0.000798] pid_max: default: 32768 minimum: 301
  437. [ 0.000970] Security Framework initialized
  438. [ 0.000982] SELinux: Initializing.
  439. [ 0.001048] SELinux: Starting in permissive mode
  440. [ 0.001107] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  441. [ 0.001115] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  442. [ 0.002016] ftrace: allocating 41273 entries in 162 pages
  443. [ 0.070013] sched-energy: Sched-energy-costs installed from DT
  444. [ 0.070042] CPU0: update cpu_capacity 462
  445. [ 0.070061] ASID allocator initialised with 32768 entries
  446. [ 0.101694] EFI services will not be available.
  447. [ 0.149629] Detected VIPT I-cache on CPU1
  448. [ 0.149720] CPU1: update cpu_capacity 462
  449. [ 0.149723] CPU1: Booted secondary processor [410fd034]
  450. [ 0.181536] Detected VIPT I-cache on CPU2
  451. [ 0.181568] CPU2: update cpu_capacity 462
  452. [ 0.181570] CPU2: Booted secondary processor [410fd034]
  453. [ 0.213565] Detected VIPT I-cache on CPU3
  454. [ 0.213593] CPU3: update cpu_capacity 462
  455. [ 0.213595] CPU3: Booted secondary processor [410fd034]
  456. [ 0.247169] Detected VIPT I-cache on CPU4
  457. [ 0.247180] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
  458. [ 0.247187] CPU features: Unsupported CPU feature variation detected.
  459. [ 0.247213] CPU4: update cpu_capacity 1024
  460. [ 0.247215] CPU4: Booted secondary processor [410fd091]
  461. [ 0.277609] Detected VIPT I-cache on CPU5
  462. [ 0.277614] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
  463. [ 0.277629] CPU5: update cpu_capacity 1024
  464. [ 0.277631] CPU5: Booted secondary processor [410fd091]
  465. [ 0.309660] Detected VIPT I-cache on CPU6
  466. [ 0.309666] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
  467. [ 0.309681] CPU6: update cpu_capacity 1024
  468. [ 0.309682] CPU6: Booted secondary processor [410fd091]
  469. [ 0.341721] Detected VIPT I-cache on CPU7
  470. [ 0.341726] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
  471. [ 0.341741] CPU7: update cpu_capacity 1024
  472. [ 0.341742] CPU7: Booted secondary processor [410fd091]
  473. [ 0.341814] Brought up 8 CPUs
  474. [ 0.341870] SMP: Total of 8 processors activated.
  475. [ 0.341881] CPU features: detected feature: 32-bit EL0 Support
  476. [ 0.341941] CPU: All CPU(s) started at EL1
  477. [ 0.341984] alternatives: patching kernel code
  478. [ 0.342131] CPU7: update max cpu_capacity 1024
  479. [ 0.345653] CPU2: update max cpu_capacity 462
  480. [ 0.345663] CPU5: update max cpu_capacity 1024
  481. [ 0.358257] DMI not present or invalid.
  482. [ 0.358552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  483. [ 0.358570] futex hash table entries: 2048 (order: 6, 262144 bytes)
  484. [ 0.361535] xor: measuring software checksum speed
  485. [ 0.401504] 8regs : 3629.000 MB/sec
  486. [ 0.441511] 8regs_prefetch: 3866.000 MB/sec
  487. [ 0.481542] 32regs : 4543.000 MB/sec
  488. [ 0.521572] 32regs_prefetch: 3866.000 MB/sec
  489. [ 0.521578] xor: using function: 32regs (4543.000 MB/sec)
  490. [ 0.521592] pinctrl core: initialized pinctrl subsystem
  491. [ 0.522655] NET: Registered protocol family 16
  492. [ 0.523308] schedtune: init normalization constants...
  493. [ 0.523318] schedtune: CLUSTER[0-3] min_pwr: 0 max_pwr: 144
  494. [ 0.523334] schedtune: CPU[0] min_pwr: 0 max_pwr: 502
  495. [ 0.523341] schedtune: CPU[1] min_pwr: 0 max_pwr: 502
  496. [ 0.523346] schedtune: CPU[2] min_pwr: 0 max_pwr: 502
  497. [ 0.523352] schedtune: CPU[3] min_pwr: 0 max_pwr: 502
  498. [ 0.523358] schedtune: CLUSTER[4-7] min_pwr: 0 max_pwr: 433
  499. [ 0.523364] schedtune: CPU[4] min_pwr: 0 max_pwr: 2848
  500. [ 0.523369] schedtune: CPU[5] min_pwr: 0 max_pwr: 2848
  501. [ 0.523374] schedtune: CPU[6] min_pwr: 0 max_pwr: 2848
  502. [ 0.523380] schedtune: CPU[7] min_pwr: 0 max_pwr: 2848
  503. [ 0.523385] schedtune: SYSTEM min_pwr: 0 max_pwr: 13977
  504. [ 0.523391] schedtune: using normalization constants mul: 739642719 sh1: 1 sh2: 13
  505. [ 0.523396] schedtune: verify normalization constants...
  506. [ 0.523402] schedtune: max_pwr/2^0: 13977 => norm_pwr: 1024
  507. [ 0.523407] schedtune: max_pwr/2^1: 6988 => norm_pwr: 511
  508. [ 0.523411] schedtune: max_pwr/2^2: 3494 => norm_pwr: 255
  509. [ 0.523417] schedtune: max_pwr/2^3: 1747 => norm_pwr: 127
  510. [ 0.523421] schedtune: max_pwr/2^4: 873 => norm_pwr: 63
  511. [ 0.523427] schedtune: max_pwr/2^5: 436 => norm_pwr: 31
  512. [ 0.523432] schedtune: configured to support 5 boost groups
  513. [ 0.539349] cpuidle: using governor ladder
  514. [ 0.551354] cpuidle: using governor menu
  515. [ 0.551367] Registered FIQ tty driver
  516. [ 0.551423] serial_debugger: uart overlay applied
  517. [ 0.551913] vdso: 2 pages (1 code @ ffffff8008d37000, 1 data @ ffffff8009224000)
  518. [ 0.551924] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  519. [ 0.552793] DMA: preallocated 256 KiB pool for atomic allocations
  520. [ 0.552861] Serial: AMBA PL011 UART driver
  521. [ 0.553106] pstore: using zlib compression
  522. [ 0.553581] console [pstore-1] enabled
  523. [ 0.553603] pstore: Registered ramoops as persistent store backend
  524. [ 0.553611] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
  525. [ 0.570224] hi3660-mbox e896b000.mailbox: Mailbox enabled
  526. [ 0.571417] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
  527. [ 0.571643] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
  528. [ 0.603757] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  529. [ 0.669766] raid6: int64x1 gen() 1378 MB/s
  530. [ 0.737815] raid6: int64x1 xor() 778 MB/s
  531. [ 0.805871] raid6: int64x2 gen() 1661 MB/s
  532. [ 0.873924] raid6: int64x2 xor() 972 MB/s
  533. [ 0.941991] raid6: int64x4 gen() 1874 MB/s
  534. [ 1.010028] raid6: int64x4 xor() 1112 MB/s
  535. [ 1.078095] raid6: int64x8 gen() 1646 MB/s
  536. [ 1.146144] raid6: int64x8 xor() 1008 MB/s
  537. [ 1.214206] raid6: neonx1 gen() 2035 MB/s
  538. [ 1.282244] raid6: neonx1 xor() 1167 MB/s
  539. [ 1.350291] raid6: neonx2 gen() 3129 MB/s
  540. [ 1.418343] raid6: neonx2 xor() 1901 MB/s
  541. [ 1.486408] raid6: neonx4 gen() 4430 MB/s
  542. [ 1.554453] raid6: neonx4 xor() 2544 MB/s
  543. [ 1.622508] raid6: neonx8 gen() 3179 MB/s
  544. [ 1.690562] raid6: neonx8 xor() 2147 MB/s
  545. [ 1.690569] raid6: using algorithm neonx4 gen() 4430 MB/s
  546. [ 1.690577] raid6: .... xor() 2544 MB/s, rmw enabled
  547. [ 1.690584] raid6: using intx1 recovery algorithm
  548. [ 1.690832] ACPI: Interpreter disabled.
  549. [ 1.691513] hisi_smmu_probe_lpae, smmu_phy_pgtable_addr is = 89cc07a0
  550. [ 1.691632] vgaarb: loaded
  551. [ 1.691810] SCSI subsystem initialized
  552. [ 1.691939] libata version 3.00 loaded.
  553. [ 1.692026] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
  554. [ 1.692053] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
  555. [ 1.692241] usbcore: registered new interface driver usbfs
  556. [ 1.692274] usbcore: registered new interface driver hub
  557. [ 1.692351] usbcore: registered new device driver usb
  558. [ 1.692373] tcpc_class_init_1.1.1_G
  559. [ 1.692391] TCPC class init OK
  560. [ 1.692404] Init Richtek RegMap
  561. [ 1.692527] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
  562. [ 1.692556] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
  563. [ 1.692585] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
  564. [ 1.692658] Linux video capture interface: v2.00
  565. [ 1.692785] dmi: Firmware registration failed.
  566. [ 1.693071] Ion: invalid heap-name in node iommu_info, please check the name
  567. [ 1.693082] Ion: invalid heap-name in node linear, please check the name
  568. [ 1.693130] Ion: node name [heap_sys_user], heap-name [sys_heap]
  569. [ 1.693142] Ion: heap index 0 : name sys_heap base 0x0 size 0x0 id 0 type 0
  570. [ 1.693151] Ion: heap sys_heap base =0, try to find dynamic area
  571. [ 1.693158] Ion: name = sys_heap, table name carveout_gralloc
  572. [ 1.693165] Ion: name = sys_heap, table name
  573. [ 1.693172] Ion: name = sys_heap, table name
  574. [ 1.693179] Ion: name = sys_heap, table name
  575. [ 1.693185] Ion: name = sys_heap, table name
  576. [ 1.693202] Ion: node name [heap_sys_contig], heap-name [sys_contig]
  577. [ 1.693212] Ion: heap index 1 : name sys_contig base 0x0 size 0x0 id 1 type 1
  578. [ 1.693220] Ion: heap sys_contig base =0, try to find dynamic area
  579. [ 1.693227] Ion: name = sys_contig, table name carveout_gralloc
  580. [ 1.693233] Ion: name = sys_contig, table name
  581. [ 1.693239] Ion: name = sys_contig, table name
  582. [ 1.693246] Ion: name = sys_contig, table name
  583. [ 1.693252] Ion: name = sys_contig, table name
  584. [ 1.693267] Ion: node name [heap_carveout_gralloc], heap-name [carveout_gralloc]
  585. [ 1.693278] Ion: heap index 2 : name carveout_gralloc base 0x0 size 0x0 id 2 type 2
  586. [ 1.693285] Ion: heap carveout_gralloc base =0, try to find dynamic area
  587. [ 1.693292] Ion: name = carveout_gralloc, table name carveout_gralloc
  588. [ 1.693300] Ion: have found heap name carveout_gralloc base = 0xde200000, size 31457280
  589. [ 1.693314] Ion: node name [heap_camera], heap-name [camera_heap]
  590. [ 1.693324] Ion: type name error ion_dma_pool!
  591. [ 1.693341] in hisi_ion_enable_iommu start
  592. [ 1.693355] get_domain_data_lpae:start_addr 0x40000, size 0xbffc0000 align 0x8000
  593. [ 1.693367] Ion: id 0 name sys_heap base 0 size 0
  594. [ 1.693444] Ion: adding heap sys_heap of type 0 with 0@0
  595. [ 1.693452] Ion: id 1 name sys_contig base 0 size 0
  596. [ 1.693466] Ion: adding heap sys_contig of type 1 with 0@0
  597. [ 1.693473] Ion: id 2 name carveout_gralloc base 3726639104 size 31457280
  598. [ 1.698139] Ion: adding heap carveout_gralloc of type 2 with de200000@1e00000
  599. [ 1.698377] Advanced Linux Sound Architecture Driver Initialized.
  600. [ 1.698745] Bluetooth: Core ver 2.22
  601. [ 1.698783] NET: Registered protocol family 31
  602. [ 1.698791] Bluetooth: HCI device and connection manager initialized
  603. [ 1.698804] Bluetooth: HCI socket layer initialized
  604. [ 1.698817] Bluetooth: L2CAP socket layer initialized
  605. [ 1.698847] Bluetooth: SCO socket layer initialized
  606. [ 1.699112] NetLabel: Initializing
  607. [ 1.699120] NetLabel: domain hash size = 128
  608. [ 1.699128] NetLabel: protocols = UNLABELED CIPSOv4
  609. [ 1.699165] NetLabel: unlabeled traffic allowed by default
  610. [ 1.699865] clocksource: Switched to clocksource arch_sys_counter
  611. [ 1.763126] VFS: Disk quotas dquot_6.6.0
  612. [ 1.763205] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  613. [ 1.763553] pnp: PnP ACPI: disabled
  614. [ 1.767302] NET: Registered protocol family 2
  615. [ 1.767721] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  616. [ 1.767882] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  617. [ 1.768081] TCP: Hash tables configured (established 32768 bind 32768)
  618. [ 1.768120] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  619. [ 1.768152] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  620. [ 1.768320] NET: Registered protocol family 1
  621. [ 1.768348] PCI: CLS 0 bytes, default 128
  622. [ 1.768529] Trying to unpack rootfs image as initramfs...
  623. [ 1.811845] Freeing initrd memory: 1644K
  624. [ 1.812738] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  625. [ 1.812944] kvm [1]: HYP mode not available
  626. [ 1.815075] audit: initializing netlink subsys (disabled)
  627. [ 1.815138] audit: type=2000 audit(1.759:1): initialized
  628. [ 1.815658] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  629. [ 1.816401] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  630. [ 1.816439] Registering sdcardfs 0.1
  631. [ 1.816580] fuse init (API version 7.26)
  632. [ 1.816736] 9p: Installing v9fs 9p2000 file system support
  633. [ 1.816917] SELinux: Registering netfilter hooks
  634. [ 1.819282] io scheduler noop registered
  635. [ 1.819306] io scheduler cfq registered (default)
  636. [ 1.820042] pinctrl-single e896c000.pinmux: 124 pins at pa ffffff800959a000 size 496
  637. [ 1.820147] pinctrl-single ff37e000.pinmux: 6 pins at pa ffffff800959c000 size 24
  638. [ 1.820255] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffffff800959e000 size 48
  639. [ 1.820354] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffffff80095a0000 size 24
  640. [ 1.820480] pinctrl-single fff11000.pinmux: 42 pins at pa ffffff80095a2000 size 168
  641. [ 1.820677] pinctrl-single e896c800.pinmux: 128 pins at pa ffffff80095a4800 size 512
  642. [ 1.820779] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffffff80095a6800 size 24
  643. [ 1.820880] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffffff80095a8800 size 24
  644. [ 1.820978] pinctrl-single ff37e800.pinmux: 6 pins at pa ffffff80095aa800 size 24
  645. [ 1.821110] pinctrl-single fff11800.pinmux: 47 pins at pa ffffff80095ac800 size 188
  646. [ 1.821702] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
  647. [ 1.822066] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
  648. [ 1.822417] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
  649. [ 1.822769] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
  650. [ 1.823117] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
  651. [ 1.823466] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
  652. [ 1.823815] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
  653. [ 1.824176] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
  654. [ 1.824519] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
  655. [ 1.824864] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
  656. [ 1.825207] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
  657. [ 1.825557] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
  658. [ 1.825908] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
  659. [ 1.826257] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
  660. [ 1.826601] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
  661. [ 1.826946] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
  662. [ 1.827282] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
  663. [ 1.827624] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
  664. [ 1.827993] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
  665. [ 1.828346] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
  666. [ 1.828698] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
  667. [ 1.829051] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
  668. [ 1.829413] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
  669. [ 1.829772] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
  670. [ 1.830129] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
  671. [ 1.830493] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
  672. [ 1.830856] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
  673. [ 1.831215] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
  674. [ 1.831563] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
  675. [ 1.862696] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
  676. [ 1.862716] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000
  677. [ 2.863423] Kirin-pcie f4000000.pcie: Link Fail
  678. [ 2.863534] Kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
  679. [ 2.863547] pci_bus 0000:00: root bus resource [bus 00-01]
  680. [ 2.863558] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
  681. [ 2.863596] pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
  682. [ 2.863633] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
  683. [ 2.863770] pci 0000:00:00.0: supports D1 D2
  684. [ 2.863778] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
  685. [ 2.864104] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
  686. [ 2.864119] pci 0000:00:00.0: PCI bridge to [bus 01]
  687. [ 2.864398] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  688. [ 2.864411] pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded
  689. [ 2.864518] aer 0000:00:00.0:pcie002: service driver aer loaded
  690. [ 2.866993] hisi-asp-dma e804b000.asp_dmac: initialized
  691. [ 2.868713] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  692. [ 2.870008] [drm] Initialized
  693. [ 2.870341] [drm] wait for external HDMI bridge driver.
  694. [ 2.870497] mali e82c0000.mali: Continuing without Mali regulator control
  695. [ 2.871139] mali e82c0000.mali: GPU identified as 0x0 arch 6.0.10 r0p0 status 2
  696. [ 2.871701] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  697. [ 2.872106] mali e82c0000.mali: Probed as mali0
  698. [ 2.875879] Error reading temperature for gpu thermal zone: -22
  699. [ 2.879363] brd: module loaded
  700. [ 2.883101] loop: module loaded
  701. [ 2.883342] [I/GPIO_HUB] gpio_hub_probe: step in
  702. [ 2.883521] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
  703. [ 2.885370] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  704. [ 2.885383] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
  705. [ 2.885392] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  706. [ 2.885402] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  707. [ 2.906779] scsi host0: ufshcd
  708. [ 2.916766] libphy: Fixed MDIO Bus: probed
  709. [ 2.916775] tun: Universal TUN/TAP device driver, 1.6
  710. [ 2.916782] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  711. [ 2.917191] PPP generic driver version 2.4.2
  712. [ 2.917273] PPP BSD Compression module registered
  713. [ 2.917282] PPP Deflate Compression module registered
  714. [ 2.917307] PPP MPPE Compression module registered
  715. [ 2.917402] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  716. [ 2.917441] usbcore: registered new interface driver pegasus
  717. [ 2.917473] usbcore: registered new interface driver rtl8150
  718. [ 2.917506] usbcore: registered new interface driver r8152
  719. [ 2.917538] usbcore: registered new interface driver asix
  720. [ 2.917570] usbcore: registered new interface driver ax88179_178a
  721. [ 2.917601] usbcore: registered new interface driver cdc_ether
  722. [ 2.917631] usbcore: registered new interface driver dm9601
  723. [ 2.917663] usbcore: registered new interface driver CoreChips
  724. [ 2.917692] usbcore: registered new interface driver smsc75xx
  725. [ 2.917723] usbcore: registered new interface driver smsc95xx
  726. [ 2.917754] usbcore: registered new interface driver net1080
  727. [ 2.917784] usbcore: registered new interface driver plusb
  728. [ 2.917814] usbcore: registered new interface driver cdc_subset
  729. [ 2.917845] usbcore: registered new interface driver zaurus
  730. [ 2.917876] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  731. [ 2.917911] usbcore: registered new interface driver cdc_ncm
  732. [ 2.918241] [USB3][hisi_dwc3_probe]+
  733. [ 2.918366] [USB3][get_phy_param]eye diagram param: 0x1c466e3
  734. [ 2.918375] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
  735. [ 2.918384] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
  736. [ 2.918391] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
  737. [ 2.918399] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
  738. [ 2.918425] [USB3][get_resource]this is asic platform (fpga flag 0)
  739. [ 2.918432] [USB3][create_attr_file]+
  740. [ 2.918500] [USB3][create_attr_file]-
  741. [ 2.918509] [USB3][hi3660_usb3phy_init]+
  742. [ 2.944003] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
  743. [ 2.944597] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
  744. [ 2.945573] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
  745. [ 2.945582] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
  746. [ 2.945589] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
  747. [ 2.945596] [USB3][hi3660_usb3phy_init]-
  748. [ 2.946106] [dwc3_otg_init]+
  749. [ 2.946117] DWC3_OCFG: 0x0
  750. [ 2.946124] DWC3_OCTL: 0x40
  751. [ 2.946131] DWC3_OEVT: 0x80000000
  752. [ 2.946138] DWC3_OEVTEN: 0x0
  753. [ 2.946144] DWC3_OSTS: 0x19
  754. [ 2.946152] DWC3_BCFG: 0x0
  755. [ 2.946158] DWC3_BCEVT: 0x0
  756. [ 2.946165] DWC3_BCEVTEN: 0x0
  757. [ 2.946171] [dwc3_otg_init]-
  758. [ 2.946201] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
  759. [ 2.948651] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  760. [ 2.948664] [USB3][hisi_dwc3_probe]init state: OFF
  761. [ 2.948672] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  762. [ 2.948679] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  763. [ 2.948686] [USB3][hisi_usb_otg_event]event: 1
  764. [ 2.948697] [USB3][hisi_dwc3_probe]-
  765. [ 2.948708] [USB3][event_work]+
  766. [ 2.948723] [USB3][handle_event][handle_event] type: 1
  767. [ 2.948733] [dwc3_otg_work]+
  768. [ 2.948733] evt = 4
  769. [ 2.948743] [dwc3_otg_stop_peripheral]+
  770. [ 2.948752] [dwc3_otg_stop_peripheral]-
  771. [ 2.948760] [dwc3_suspend_device] +
  772. [ 2.948834] [dwc3_suspend_device] -
  773. [ 2.948843] [dwc3_otg_work]-
  774. [ 2.948852] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  775. [ 2.948865] [USB3][handle_event]hisi usb status: DEVICE -> OFF
  776. [ 2.948873] [USB3][event_work]-
  777. [ 2.949100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  778. [ 2.949109] ehci-pci: EHCI PCI platform driver
  779. [ 2.949145] ehci-platform: EHCI generic platform driver
  780. [ 2.949275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  781. [ 2.949294] ohci-pci: OHCI PCI platform driver
  782. [ 2.949329] ohci-platform: OHCI generic platform driver
  783. [ 2.949673] usbcore: registered new interface driver cdc_acm
  784. [ 2.949681] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  785. [ 2.949715] usbcore: registered new interface driver usb-storage
  786. [ 2.949783] usbcore: registered new interface driver usbserial
  787. [ 2.949816] usbcore: registered new interface driver usbserial_generic
  788. [ 2.949852] usbserial: USB Serial support registered for generic
  789. [ 2.949892] usbcore: registered new interface driver ftdi_sio
  790. [ 2.949918] usbserial: USB Serial support registered for FTDI USB Serial Device
  791. [ 2.949943] usbcore: registered new interface driver option
  792. [ 2.949970] usbserial: USB Serial support registered for GSM modem (1-port)
  793. [ 2.949994] usbcore: registered new interface driver pl2303
  794. [ 2.950018] usbserial: USB Serial support registered for pl2303
  795. [ 2.950043] usbcore: registered new interface driver qcserial
  796. [ 2.950068] usbserial: USB Serial support registered for Qualcomm USB modem
  797. [ 2.950094] usbcore: registered new interface driver usb_serial_simple
  798. [ 2.950121] usbserial: USB Serial support registered for carelink
  799. [ 2.950146] usbserial: USB Serial support registered for zio
  800. [ 2.950169] usbserial: USB Serial support registered for funsoft
  801. [ 2.950194] usbserial: USB Serial support registered for flashloader
  802. [ 2.950218] usbserial: USB Serial support registered for google
  803. [ 2.950243] usbserial: USB Serial support registered for vivopay
  804. [ 2.950269] usbserial: USB Serial support registered for moto_modem
  805. [ 2.950295] usbserial: USB Serial support registered for novatel_gps
  806. [ 2.950320] usbserial: USB Serial support registered for hp4x
  807. [ 2.950344] usbserial: USB Serial support registered for suunto
  808. [ 2.950370] usbserial: USB Serial support registered for siemens_mpi
  809. [ 2.950432] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
  810. [ 2.950440] [I/hisi_pd] pd_dpm_init
  811. [ 2.950515] [I/hisi_pd] pd_dpm_probe : +++++++++
  812. [ 2.950579] [I/hisi_pd] pd_dpm_probe ++++
  813. [ 2.950579]
  814. [ 2.950815] rt1711h_init (1.1.8_G): initializing...
  815. [ 2.950830] rt1711h node found...
  816. [ 2.951038] mousedev: PS/2 mouse device common for all mice
  817. [ 2.951553] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
  818. [ 2.951737] i2c /dev entries driver
  819. [ 2.952750] hi3660_thermal fff30000.tsensor: failed to register thermal sensor0: -19
  820. [ 2.952768] hi3660_thermal fff30000.tsensor: failed to register thermal sensor1: -19
  821. [ 2.952784] hi3660_thermal fff30000.tsensor: failed to register thermal sensor2: -19
  822. [ 2.952801] hi3660_thermal fff30000.tsensor: failed to register thermal sensor3: -19
  823. [ 2.952845] hi3660_thermal fff30000.tsensor: failed to register thermal sensor5: -19
  824. [ 2.952853] hi3660_thermal fff30000.tsensor: Thermal Sensor Loaded
  825. [ 2.953140] sp805-wdt e8a06000.watchdog: registration successful
  826. [ 2.953257] sp805-wdt e8a07000.watchdog: registration successful
  827. [ 2.953306] device-mapper: uevent: version 1.0.3
  828. [ 2.953389] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  829. [ 2.953551] Bluetooth: HCI UART driver ver 2.3
  830. [ 2.953561] Bluetooth: HCI UART protocol H4 registered
  831. [ 2.953608] Bluetooth: HCI UART protocol LL registered
  832. [ 2.953642] usbcore: registered new interface driver btusb
  833. [ 2.955378] DT idle-states: /cpus/idle-states/cluster-sleep-0 idle state not valid, bailing out
  834. [ 2.956585] sdhci: Secure Digital Host Controller Interface driver
  835. [ 2.956593] sdhci: Copyright(c) Pierre Ossman
  836. [ 2.956626] Synopsys Designware Multimedia Card Interface Driver
  837. [ 2.957123] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
  838. [ 2.959248] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
  839. [ 2.959309] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
  840. [ 2.959318] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
  841. [ 2.959347] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 55,32 bit host data width,256 deep fifo
  842. [ 2.959502] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
  843. [ 2.982721] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  844. [ 3.000994] dwmmc_k3 ff37f000.dwmmc1: 1 slots initialized
  845. [ 3.001255] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  846. [ 3.004420] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  847. [ 3.004501] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  848. [ 3.004514] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  849. [ 3.004561] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 56,32 bit host data width,256 deep fifo
  850. [ 3.004848] sdhci-pltfm: SDHCI platform and OF driver helper
  851. [ 3.008680] ledtrig-cpu: registered to indicate activity on CPUs
  852. [ 3.009020] hidraw: raw HID events driver (C) Jiri Kosina
  853. [ 3.012993] usbcore: registered new interface driver usbhid
  854. [ 3.013027] usbhid: USB HID core driver
  855. [ 3.013568] ashmem: initialized
  856. [ 3.013750] nanohub: loaded; ret=0
  857. [ 3.014351] hi6220-serial-debug fff32000.fiq-debugger: No signal IRQ, error=-6
  858. [ 3.014388] hi6220-serial-debug fff32000.fiq-debugger: No wakeup IRQ, error=-6
  859. [ 3.096195] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 0 param_offset 0 buff_len 31 ret 0
  860. [ 3.096200] ufshcd-hi3660 ff3b0000.ufs: ufs_get_device_info: Failed reading Device Desc. err = -22
  861. [ 3.096204] ufshcd-hi3660 ff3b0000.ufs: ufs_advertise_fixup_device: Failed getting device info. err = -22
  862. [ 3.098652] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
  863. [ 3.098656] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
  864. [ 3.101009] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
  865. [ 3.101020] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane1 = 0x1
  866. [ 3.136160] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  867. [ 3.172264] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  868. [ 3.208213] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  869. [ 3.244228] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  870. [ 3.280243] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  871. [ 3.316226] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  872. [ 3.352213] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  873. [ 3.388227] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  874. [ 3.424209] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  875. [ 3.460225] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag: Sending flag query for idn 3 failed, err = -11
  876. [ 3.460243] ufshcd-hi3660 ff3b0000.ufs: ufshcd_query_flag_retry: query attribute, opcode 5, idn 3, failed with error -11 after 10 retires
  877. [ 3.496210] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  878. [ 3.532223] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  879. [ 3.568200] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  880. [ 3.604223] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  881. [ 3.640207] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  882. [ 3.676221] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  883. [ 3.712227] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  884. [ 3.748220] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  885. [ 3.783963] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  886. [ 3.820214] ufshcd-hi3660 ff3b0000.ufs: __ufshcd_query_descriptor: opcode 0x01 for idn 8 failed, err = -11
  887. [ 3.820230] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 8 param_offset 0 buff_len 98 ret -11
  888. [ 3.820243] ufshcd-hi3660 ff3b0000.ufs: ufshcd_init_icc_levels: Failed reading power descriptor.len = 98 ret = -11
  889. [ 5.732652] random: fast init done
  890. [ 6.240828] console [ttyFIQ0] enabled
  891. [ 6.244651] Registered fiq debugger ttyFIQ0
  892. [ 6.249217] hisi_ddr_devfreq ddr_devfreq: init success
  893. [ 6.254628] optee: probing for conduit method from DT.
  894. [ 6.259831] optee: api uid mismatch
  895. [ 6.263467] hifi_misc [E][359755]:hifi_check_img_loaded:1472: hifi img is loaded fail: 0xffffffff.
  896. [ 6.273506] hifi pdev name[hifidsp].
  897. [ 6.277164] DRV_IPCIntInit begin.
  898. [ 6.280517] DRV_IPCIntInit line = 220
  899. [ 6.284224] BSP_DRV_IPCIntInit end.
  900. [ 6.287749] func = mailbox_init, line = 695 baseaddr = 0x8b5f9800
  901. [ 6.293929] mem_remap_type: phys_addr:0x8b5f9800 size:0x00010000 npages:17 vaddr:ffffff800b857800 offset:0x00000800
  902. [ 6.304496] i = 0, head_addr = 0xffffff800b8578f0, data_addr = 0xffffff800b85acb0
  903. [ 6.312069] i = 1, head_addr = 0xffffff800b857850, data_addr = 0xffffff800b857cb0
  904. [ 6.319643] i = 2, head_addr = 0xffffff800b857918, data_addr = 0xffffff800b85acb0
  905. [ 6.327216] i = 3, head_addr = 0xffffff800b857878, data_addr = 0xffffff800b8594b0
  906. [ 6.334790] <<<<<<<<<<<<<<mailbox_create_box cpu_id = 0>>>>>>>>>>>>>>
  907. [ 6.341308] ******************func = mailbox_init_all_handle line = 530 src_id = 1 dst_id = 4******************
  908. [ 6.351519] ******************func = mailbox_init_all_handle line = 530 src_id = 0 dst_id = 4******************
  909. [ 6.361731] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 1******************
  910. [ 6.371943] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 0******************
  911. [ 6.383390] mb init OK!
  912. [ 6.386488] mb->local_id = 0 dst_id = 0
  913. [ 6.390375] hifi_misc [I][363913]:ap_ipc_int_init:914: Enter ap_ipc_int_init
  914. [ 6.397511] hifi_misc [I][364147]:ap_ipc_int_init:919: Exit ap_ipc_int_init
  915. [ 6.404647] usbcore: registered new interface driver snd-usb-audio
  916. [ 6.411364] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
  917. [ 6.417348] u32 classifier
  918. [ 6.420086] Actions configured
  919. [ 6.423525] Netfilter messages via NETLINK v0.30.
  920. [ 6.428586] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  921. [ 6.435070] ctnetlink v0.93: registering with nfnetlink.
  922. [ 6.440813] xt_time: kernel timezone is -0000
  923. [ 6.445568] ip_tables: (C) 2000-2006 Netfilter Core Team
  924. [ 6.451011] arp_tables: arp_tables: (C) 2002 David S. Miller
  925. [ 6.456995] Initializing XFRM netlink socket
  926. [ 6.461363] NET: Registered protocol family 10
  927. [ 6.466557] mip6: Mobile IPv6
  928. [ 6.469573] ip6_tables: (C) 2000-2006 Netfilter Core Team
  929. [ 6.476196] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  930. [ 6.482423] NET: Registered protocol family 17
  931. [ 6.486928] NET: Registered protocol family 15
  932. [ 6.491438] Bridge firewalling registered
  933. [ 6.496093] Bluetooth: RFCOMM TTY layer initialized
  934. [ 6.501035] Bluetooth: RFCOMM socket layer initialized
  935. [ 6.506243] Bluetooth: RFCOMM ver 1.11
  936. [ 6.510039] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  937. [ 6.516032] Bluetooth: HIDP socket layer initialized
  938. [ 6.521058] 8021q: 802.1Q VLAN Support v1.8
  939. [ 6.525391] 9pnet: Installing 9P2000 support
  940. [ 6.530246] Registered cp15_barrier emulation handler
  941. [ 6.535596] Registered setend emulation handler
  942. [ 6.540357] registered taskstats version 1
  943. [ 6.546930] Btrfs loaded, crc32c=crc32c-arm64-hw
  944. [ 6.556881] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
  945. [ 6.566110] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
  946. [ 6.575193] serial serial0: tty port ttyAMA4 registered
  947. [ 6.580653] uart-pl011 fdf01000.serial: no DMA platform data
  948. [ 6.580704] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
  949. [ 6.580731] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffffff800b8c5000
  950. [ 6.580764] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  951. [ 6.586770] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
  952. [ 6.586792] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffffff800b8c7000
  953. [ 6.586818] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
  954. [ 6.595359] rt1711_i2c_probe
  955. [ 6.595361] I2C functionality : OK...
  956. [ 6.641150] rt_parse_dt
  957. [ 6.643631] rt1711h_chipID = 0x2171
  958. [ 6.647191] regmap_device_register: name = rt1711-4e
  959. [ 6.652257] rt_regmap_rt1711-4e: rt register cache data init
  960. [ 6.658101] rt_regmap_rt1711-4e: cache cata init successfully
  961. [ 6.664103] tcpc_device_register register tcpc device (type_c_port0)
  962. [ 6.670655] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
  963. [ 6.678180] PD Timer number = 37
  964. [ 6.681988] tcpci_timer_init : init OK
  965. [ 6.686323] pd_parse_pdata
  966. [ 6.689091] pd_parse_pdata src pdo data =
  967. [ 6.693172] pd_parse_pdata 0: 0x00019064
  968. [ 6.697147] pd_parse_pdata snk pdo data =
  969. [ 6.701205] pd_parse_pdata 0: 0x000190c8
  970. [ 6.705174] pd_parse_pdata 1: 0x0002d0c8
  971. [ 6.709144] pd_parse_pdata id vdos data =
  972. [ 6.713217] pd_parse_pdata 0: 0xd00029cf
  973. [ 6.717188] pd_parse_pdata 1: 0x00000000
  974. [ 6.721154] pd_parse_pdata 2: 0x00010000
  975. [ 6.725123] dpm_caps: local_dr_power
  976. [ 6.728737] dpm_caps: local_dr_data
  977. [ 6.732265] dpm_caps: local_ext_power
  978. [ 6.735968] dpm_caps: local_usb_comm
  979. [ 6.739579] dpm_caps: local_usb_suspend
  980. [ 6.743480] dpm_caps: local_high_cap
  981. [ 6.747095] dpm_caps: local_give_back
  982. [ 6.750797] dpm_caps: local_no_suspend
  983. [ 6.754587] dpm_caps: local_vconn_supply
  984. [ 6.758553] dpm_caps: attemp_discover_cable_dfp
  985. [ 6.763134] dpm_caps: attemp_enter_dp_mode
  986. [ 6.767276] dpm_caps: attemp_discover_cable
  987. [ 6.769376] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2
  988. [ 6.769388] hci-ti serial0-0: Falling back to user helper
  989. [ 6.787090] dpm_caps: attemp_discover_id
  990. [ 6.791057] dpm_caps: pr_reject_as_source
  991. [ 6.795113] dpm_caps: pr_reject_as_sink
  992. [ 6.798992] dpm_caps: pr_check_gp_source
  993. [ 6.802959] dpm_caps: pr_check_gp_sink
  994. [ 6.806751] dpm_caps: dr_reject_as_dfp
  995. [ 6.810541] dpm_caps: dr_reject_as_ufp
  996. [ 6.814331] dpm_caps: snk_prefer_low_voltage
  997. [ 6.818649] dpm_caps: snk_ignore_mismatch_current
  998. [ 6.823407] dpm_caps = 0xc010c10b
  999. [ 6.826758] [I/hisi_pd] PE:pd_core_init
  1000. [ 6.835259] rt1711_init_alert name = type_c_port0
  1001. [ 6.840053] rt1711_init_alert gpio # = 291
  1002. [ 6.844213] GPIO requested...
  1003. [ 6.847213] rt1711_init_alert : IRQ number = 291
  1004. [ 6.851885] rt1711_init_alert : irq initialized...
  1005. [ 6.857372] IRQF_NO_THREAD Test
  1006. [ 6.864130] [I/hisi_pd] [TCPC-I]SkipAlert:0x0000
  1007. [ 6.868961] [I/hisi_pd] TPC-I:typec_init: DRP
  1008. [ 6.873851] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
  1009. [ 6.881164] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  1010. [ 6.886977] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  1011. [ 6.893152] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
  1012. [ 6.899052] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
  1013. [ 6.904865] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
  1014. [ 6.911029] [USB3][hisi_usb_otg_event]event: 2
  1015. [ 6.915529] [I/hisi_pd] TPC-I:** Unattached.SNK
  1016. [ 6.915789] [USB3][event_work]+
  1017. [ 6.915801] [USB3][handle_event][handle_event] type: 2
  1018. [ 6.915809] [USB3][set_vbus_power]set port power 1
  1019. [ 6.915826] [dwc3_otg_work]+
  1020. [ 6.915826] evt = 2
  1021. [ 6.915827] [dwc3_resume_device] +
  1022. [ 6.916027] [dwc3_resume_device] -
  1023. [ 6.916034] [dwc3_otg_start_host]+
  1024. [ 6.916764] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1025. [ 6.916802] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  1026. [ 6.918241] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
  1027. [ 6.918374] xhci-hcd xhci-hcd.0.auto: irq 337, io mem 0xff100000
  1028. [ 6.919955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1029. [ 6.919969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1030. [ 6.919980] usb usb1: Product: xHCI Host Controller
  1031. [ 6.919991] usb usb1: Manufacturer: Linux 4.9.77-geae6367a9237 xhci-hcd
  1032. [ 6.920002] usb usb1: SerialNumber: xhci-hcd.0.auto
  1033. [ 6.921151] hub 1-0:1.0: USB hub found
  1034. [ 6.921230] hub 1-0:1.0: 1 port detected
  1035. [ 6.922028] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1036. [ 6.922051] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  1037. [ 6.922235] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  1038. [ 6.922542] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  1039. [ 6.922555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1040. [ 6.922566] usb usb2: Product: xHCI Host Controller
  1041. [ 6.922577] usb usb2: Manufacturer: Linux 4.9.77-geae6367a9237 xhci-hcd
  1042. [ 6.922588] usb usb2: SerialNumber: xhci-hcd.0.auto
  1043. [ 6.923709] hub 2-0:1.0: USB hub found
  1044. [ 6.923777] hub 2-0:1.0: 1 port detected
  1045. [ 6.924629] [dwc3_otg_start_host]-
  1046. [ 6.924636] [dwc3_otg_work]-
  1047. [ 6.924644] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  1048. [ 6.924656] [USB3][handle_event]hisi usb_status: OFF -> HOST
  1049. [ 6.924664] [USB3][event_work]-
  1050. [ 7.096048] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  1051. [ 7.103532] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  1052. [ 7.112155] tcpc_device_irq_enable : tcpc irq enable OK!
  1053. [ 7.113246] [I/hisi_pd] TPC-I:[CC_Alert] 0/5
  1054. [ 7.113255] [I/hisi_pd] TPC-I:** AttachWait.SNK
  1055. [ 7.126608] rt1711_i2c_probe probe OK!
  1056. [ 7.139010] [drm] dss irq = 70.[ 7.142038] [drm] dss_pri_clk:[400000000]->[400000000].
  1057. [ 7.147381] [drm] dss_pxl0_clk:[144000000]->[144000000].
  1058. [ 7.152763] get_domain_data_lpae:start_addr 0x8000, size 0xbfff8000 align 0x40000
  1059. [ 7.160440] [drm] host attach, client name=[adv7533], id=0
  1060. [ 7.166551] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
  1061. [ 7.172989] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  1062. [ 7.179683] [drm] No driver support for vblank timestamp query.
  1063. [ 7.187314] [drm] num_crtc=1, num_connector=1.
  1064. [ 7.191822] [drm:drm_helper_disable_unused_functions] *ERROR* Called for atomic driver, this is not what you want.
  1065. [ 7.202991] kirin-drm e8600000.dpe: No connectors reported connected with modes
  1066. [ 7.210397] [drm] Cannot find any crtc or sizes - going 1024x768
  1067. [ 7.218027] kirin-drm e8600000.dpe: fb0: dss frame buffer device
  1068. [ 7.233812] [I/hisi_pd] TPC-I:[CC_Change] 0/5
  1069. [ 7.238394] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  1070. [ 7.240316] [drm] Initialized kirin 1.0.0 20170309 on minor 0
  1071. [ 7.240542] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  1072. [ 7.242652] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  1073. [ 7.242691] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  1074. [ 7.242696] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  1075. [ 7.242706] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 56,32 bit host data width,128 deep fifo
  1076. [ 7.248340] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  1077. [ 7.296717] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  1078. [ 7.304226] [I/GPIO_HUB] gpio_hub_power_off: gpio hub hub vbus no power set success[ 7.311823] [I/GPIO_HUB] gpio_hub_change_typec_power: typec power no change
  1079. [ 7.318922] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:3
  1080. [ 7.324754] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:3
  1081. [ 7.330931] [USB3][hisi_usb_otg_event]event: 3
  1082. [ 7.335444] [USB3][event_work]+
  1083. [ 7.335465] [E/GPIO_HUB] gpio_hub_switch_to_typec: switch to typec
  1084. [ 7.335468] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:0
  1085. [ 7.335470] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:0
  1086. [ 7.335472] [USB3][hisi_usb_otg_event]event: 0
  1087. [ 7.335495] [I/hisi_pd] TPC-I:** Attached.SNK
  1088. [ 7.335498] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  1089. [ 7.335501] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  1090. [ 7.350442] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  1091. [ 7.358686] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  1092. [ 7.358692] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
  1093. [ 7.358695] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  1094. [ 7.358698] [I/hisi_pd] TPC-I:Attached-> SINK
  1095. [ 7.358701] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=7,+++
  1096. [ 7.358704] [I/hisi_pd] pd_dpm_set_typec_state = 2
  1097. [ 7.358706] [I/hisi_pd] pd_dpm_set_cc_orientation cc_orientation =1
  1098. [ 7.358720] [I/hisi_pd] [TCPC-I]usb_port_attached
  1099. [ 7.358752] [I/hisi_pd] pd_dpm_report_device_attach
  1100. [ 7.373891] dwmmc_k3 ff3ff000.dwmmc2: 1 slots initialized
  1101. [ 7.374391] hisi_i2s e804f800.hisi_i2s: Failed to get DMA channel capabilities, falling back to period counting: -6
  1102. [ 7.374394] asoc-simple-card soc:sound: hdmi-hifi.0 <-> e804f800.hisi_i2s mapping ok
  1103. [ 7.392722] otg_wakelock_init: No USB transceiver found
  1104. [ 7.393077] input: keys as /devices/platform/keys/input/input0
  1105. [ 7.397172] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
  1106. [ 7.397782] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13)
  1107. [ 7.398040] ALSA device list:
  1108. [ 7.398041] #0: hikey-hdmi
  1109. [ 7.410507] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  1110. [ 7.413545] mmc1: new SDIO card at address 0001
  1111. [ 7.414165] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
  1112. [ 7.414167] wl18xx_driver wl18xx.2.auto: Falling back to user helper
  1113. [ 7.533179] [USB3][handle_event][handle_event] type: 3
  1114. [ 7.533181] [USB3][set_vbus_power]set port power 0
  1115. [ 7.533183] [I/hisi_pd] pd_dpm_report_bc12 : PD_WAKE_UNLOCK
  1116. [ 7.533186] [I/hisi_pd] pd_dpm_report_bc12 : event (4)
  1117. [ 7.533188] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  1118. [ 7.533192] [dwc3_otg_work]+
  1119. [ 7.533192] evt = 1
  1120. [ 7.533192] [dwc3_otg_stop_host]+
  1121. [ 7.533222] xhci-hcd xhci-hcd.0.auto: remove, state 1
  1122. [ 7.533234] usb usb2: USB disconnect, device number 1
  1123. [ 7.735907] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  1124. [ 7.741868] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
  1125. [ 7.748124] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  1126. [ 7.754103] Pending event is same --> ignore this event 2
  1127. [ 7.759721] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  1128. [ 7.992948] usb usb2-port1: attempt power cycle
  1129. [ 8.313602] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
  1130. [ 8.319369] xhci-hcd xhci-hcd.0.auto: remove, state 4
  1131. [ 8.324516] usb usb1: USB disconnect, device number 1
  1132. [ 8.330189] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
  1133. [ 8.336056] [dwc3_otg_stop_host]-
  1134. [ 8.339426] [dwc3_suspend_device] +
  1135. [ 8.343030] [dwc3_suspend_device] -
  1136. [ 8.346584] [dwc3_otg_work]-
  1137. [ 8.349503] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  1138. [ 8.355255] [USB3][handle_event]hiusb_status: HOST -> OFF
  1139. [ 8.360722] [USB3][handle_event][handle_event] type: 0
  1140. [ 8.676280] [USB3][detect_charger_type]DCD done
  1141. [ 8.708262] [USB3][detect_charger_type]Primary Detection done
  1142. [ 8.714184] [USB3][detect_charger_type]Secondary Detection done
  1143. [ 8.748252] [USB3][detect_charger_type]type: 0
  1144. [ 8.752855] [I/hisi_pd] pd_dpm_report_bc12 : event (0)
  1145. [ 8.758153] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  1146. [ 8.766113] [dwc3_otg_work]+
  1147. evt = 3[ 8.769809] [dwc3_resume_device] +
  1148. [ 8.773642] [dwc3_resume_device] -
  1149. [ 8.777141] [dwc3_otg_start_peripheral]+
  1150. [ 8.781165] [dwc3_otg_start_peripheral]-
  1151. [ 8.785185] [dwc3_otg_work]-
  1152. [ 8.788145] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  1153. [ 8.793642] [USB3][handle_event]hisi usb status: OFF -> DEVICE
  1154. [ 8.799596] [USB3][event_work]-
  1155. [ 8.802808] [USB3][event_work]+
  1156. [ 8.806016] [USB3][event_work]-
  1157. [ 12.468893] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  1158. [ 12.474924] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
  1159. [ 12.481236] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  1160. [ 12.487258] Pending event is same --> ignore this event 2
  1161. [ 12.492986] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  1162. [ 17.203982] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  1163. [ 17.210019] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
  1164. [ 17.216339] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  1165. [ 17.222356] Pending event is same --> ignore this event 2
  1166. [ 17.228065] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  1167. [ 21.935057] [I/hisi_pd] PE:TYPE-C Only Charger!
  1168. [ 21.939999] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  1169. [ 21.946016] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
  1170. [ 21.953024] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  1171. [ 21.960957] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=8,+++
  1172. [ 25.220298] ufshcd-hi3660 ff3b0000.ufs: ufshcd_issue_tm_cmd: task management cmd 0x80 timed-out
  1173. [ 25.229318] ufshcd-hi3660 ff3b0000.ufs: ufshcd_abort: failed with err -110
  1174. [ 25.236545] ufshcd-hi3660 ff3b0000.ufs: ufshcd_task_req_compl: failed, ocs = 0xf
  1175. [ 25.244150] ufshcd-hi3660 ff3b0000.ufs: ufshcd_eh_device_reset_handler: failed with err 15
  1176. [ 25.434971] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 0 param_offset 0 buff_len 31 ret 0
  1177. [ 25.447414] ufshcd-hi3660 ff3b0000.ufs: ufs_get_device_info: Failed reading Device Desc. err = -22
  1178. [ 25.456830] ufshcd-hi3660 ff3b0000.ufs: ufs_advertise_fixup_device: Failed getting device info. err = -22
  1179. [ 25.469191] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
  1180. [ 25.476040] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
  1181. [ 25.486697] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
  1182. [ 25.494619] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane1 = 0x1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!