Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 2.6.36 (havoc@Avernus) (gcc version 4.4.4 (GCC) ) #1 PREEMPT Sun Oct 24 18:13:33 EEST 2010
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] User-defined physical RAM map:
- [ 0.000000] memory: 02000000 @ 00000000 (usable)
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00002000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00002000
- [ 0.000000] On node 0 totalpages: 8192
- [ 0.000000] free_area_init_node: node 0, pgdat 803d84f0, node_mem_map 81000000
- [ 0.000000] Normal zone: 64 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 8128 pages, LIFO batch:0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
- [ 0.000000] Kernel command line: mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
- [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
- [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
- [ 0.000000] Memory: 28292k/32768k available (2901k kernel code, 4476k reserved, 973k data, 144k init, 0k highmem)
- [ 0.000000] NR_IRQS:190
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.020000] Calibrating delay loop... 335.05 BogoMIPS (lpj=1675264)
- [ 0.260000] pid_max: default: 32768 minimum: 301
- [ 0.270000] Mount-cache hash table entries: 512
- [ 0.290000] NET: Registered protocol family 16
- [ 0.310000] JZ4740 GPIO initalized
- [ 0.320000] Qi Hardware JZ4740 QI LB60 setup
- [ 0.380000] bio: create slab <bio-0> at 0
- [ 0.400000] Advanced Linux Sound Architecture Driver Version 1.0.23.
- [ 0.410000] Switching to clocksource jz4740-timer
- [ 0.520000] NET: Registered protocol family 2
- [ 0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.550000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- [ 0.560000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.570000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.580000] TCP reno registered
- [ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.600000] NET: Registered protocol family 1
- [ 0.610000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 0.620000] msgmni has been set to 55
- [ 0.630000] io scheduler noop registered
- [ 0.640000] io scheduler deadline registered (default)
- [ 0.670000] Console: switching to colour frame buffer device 40x15
- [ 0.700000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.720000] serial8250.0: ttyS0 at MMIO 0x10030000 (irq = 17) is a 16550
- [ 0.730000] console [ttyS0] enabled, bootconsole disabled
- [ 0.740000] serial8250.0: ttyS1 at MMIO 0x10031000 (irq = 16) is a 16550
- [ 0.760000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
- [ 0.770000] Scanning device for bad blocks
- [ 1.040000] Creating 3 MTD partitions on "jz4740-nand":
- [ 1.050000] 0x000000000000-0x000000400000 : "NAND BOOT partition"
- [ 1.070000] 0x000000400000-0x000000800000 : "NAND KERNEL partition"
- [ 1.090000] 0x000000800000-0x000080000000 : "NAND ROOTFS partition"
- [ 1.110000] jz4740-nand jz4740-nand.0: Successfully registered JZ4740 NAND driver
- [ 1.160000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 1.180000] input: matrix-keypad as /devices/platform/matrix-keypad/input/input1
- [ 1.200000] input: pwm-beeper as /devices/platform/pwm-beeper/input/input2
- [ 1.220000] jz4740-rtc jz4740-rtc: rtc core: registered jz4740-rtc as rtc0
- [ 1.240000] jz4740-mmc jz4740-mmc.0: JZ SD/MMC card driver registered
- [ 1.250000] ------------[ cut here ]------------
- [ 1.250000] WARNING: at kernel/irq/manage.c:290 0x80078c70()
- [ 1.250000] Unbalanced enable for IRQ 185
- [ 1.250000] Modules linked in:
- [ 1.250000] Call Trace:[<800190a0>] 0x800190a0
- [ 1.250000] [<800190a0>] 0x800190a0
- [ 1.250000] [<8003dde4>] 0x8003dde4
- [ 1.250000] [<80078c70>] 0x80078c70
- [ 1.250000] [<8003de98>] 0x8003de98
- [ 1.250000] [<80078c70>] 0x80078c70
- [ 1.250000] [<8022fe1c>] 0x8022fe1c
- [ 1.250000] [<8022ff58>] 0x8022ff58
- [ 1.250000] [<80058698>] 0x80058698
- [ 1.250000] [<800195fc>] 0x800195fc
- [ 1.250000] [<80041478>] 0x80041478
- [ 1.250000] [<80058e30>] 0x80058e30
- [ 1.250000] [<80058c9c>] 0x80058c9c
- [ 1.250000] [<80058c9c>] 0x80058c9c
- [ 1.250000] [<8005da90>] 0x8005da90
- [ 1.250000] [<8002022c>] 0x8002022c
- [ 1.250000] [<8005da08>] 0x8005da08
- [ 1.250000] [<8002021c>] 0x8002021c
- [ 1.250000]
- [ 1.250000] ---[ end trace 1f645866cee7ecb7 ]---
- [ 1.260000] No device for DAI jz4740-i2s
- [ 1.320000] asoc: jz4740 <-> jz4740-i2s mapping ok
- [ 1.330000] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 1.340000] ALSA device list:
- [ 1.350000] mmc0: new SD card at address 1234
- [ 1.360000] #0: QI LB60 (jz4740)
- [ 1.370000] mmcblk0: mmc0:1234 SA02G 1.83 GiB
- [ 1.380000] TCP westwood registered
- [ 1.390000] NET: Registered protocol family 17
- [ 1.400000] mmcblk0: p1 p2
- [ 1.430000] jz4740-rtc jz4740-rtc: setting system clock to 2010-10-24 19:18:31 UTC (1287947911)
- [ 2.480000] VFS: Mounted root (ext2 filesystem) on device 179:1.
- [ 2.500000] Freeing unused kernel memory: 144k freed
- [ 4.270000] power_supply battery: driver failed to report `voltage_now' property
- [ 47.170000] power_supply battery: driver failed to report `voltage_now' property
- [ 127.900000] power_supply battery: driver failed to report `voltage_now' property
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement