Advertisement
mysterio

sudo smartctl -a /dev/sdX (on AC)

May 29th, 2012
524
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.63 KB | None | 0 0
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-24-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Scorpio Blue Serial ATA
  6. Device Model: WDC WD2500BEVS-60UST0
  7. Serial Number: WD-WXE708H75194
  8. LU WWN Device Id: 5 0014ee 2571ceeec
  9. Firmware Version: 01.01A01
  10. User Capacity: 250,059,350,016 bytes [250 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: Exact ATA specification draft version not indicated
  15. Local Time is: Tue May 29 16:46:56 2012 GMT
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21. See vendor-specific Attribute list for marginal Attributes.
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x80) Offline data collection activity
  25. was never started.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 9600) seconds.
  32. Offline data collection
  33. capabilities: (0x5b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 115) minutes.
  50. SCT capabilities: (0x303f) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 13
  59. 3 Spin_Up_Time 0x0027 188 187 021 Pre-fail Always - 1558
  60. 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5544
  61. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  62. 7 Seek_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
  63. 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5333
  64. 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
  65. 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0
  66. 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4009
  67. 187 Reported_Uncorrect 0x0032 100 094 000 Old_age Always - 6
  68. 188 Command_Timeout 0x0032 100 001 000 Old_age Always - 8590066004
  69. 190 Airflow_Temperature_Cel 0x0022 054 035 040 Old_age Always In_the_past 46
  70. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 705
  71. 193 Load_Cycle_Count 0x0032 185 185 000 Old_age Always - 45070
  72. 194 Temperature_Celsius 0x0022 101 082 000 Old_age Always - 46
  73. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  74. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 2
  77. 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
  78.  
  79. SMART Error Log Version: 1
  80. ATA Error Count: 9 (device log contains only the most recent five errors)
  81. CR = Command Register [HEX]
  82. FR = Features Register [HEX]
  83. SC = Sector Count Register [HEX]
  84. SN = Sector Number Register [HEX]
  85. CL = Cylinder Low Register [HEX]
  86. CH = Cylinder High Register [HEX]
  87. DH = Device/Head Register [HEX]
  88. DC = Device Command Register [HEX]
  89. ER = Error register [HEX]
  90. ST = Status register [HEX]
  91. Powered_Up_Time is measured from power on, and printed as
  92. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  93. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  94.  
  95. Error 9 occurred at disk power-on lifetime: 2948 hours (122 days + 20 hours)
  96. When the command that caused the error occurred, the device was active or idle.
  97.  
  98. After command completion occurred, registers were:
  99. ER ST SC SN CL CH DH
  100. -- -- -- -- -- -- --
  101. 40 51 08 f8 14 4d 40 Error: UNC 8 sectors at LBA = 0x004d14f8 = 5051640
  102.  
  103. Commands leading to the command that caused the error were:
  104. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  105. -- -- -- -- -- -- -- -- ---------------- --------------------
  106. 25 00 08 f8 14 4d 01 00 00:40:58.568 READ DMA EXT
  107. 25 00 08 a0 19 4d 01 00 00:40:58.464 READ DMA EXT
  108. 25 00 01 30 c8 96 0d 00 00:40:57.724 READ DMA EXT
  109. 25 00 50 e0 c7 96 0d 00 00:40:57.723 READ DMA EXT
  110. 25 00 08 d8 c7 96 0d 00 00:40:57.718 READ DMA EXT
  111.  
  112. Error 8 occurred at disk power-on lifetime: 1978 hours (82 days + 10 hours)
  113. When the command that caused the error occurred, the device was active or idle.
  114.  
  115. After command completion occurred, registers were:
  116. ER ST SC SN CL CH DH
  117. -- -- -- -- -- -- --
  118. 10 51 38 a8 83 5d 40 Error: IDNF 56 sectors at LBA = 0x005d83a8 = 6128552
  119.  
  120. Commands leading to the command that caused the error were:
  121. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  122. -- -- -- -- -- -- -- -- ---------------- --------------------
  123. 35 00 38 a8 83 5d 00 00 02:46:43.558 WRITE DMA EXT
  124. 25 00 40 1e 60 1d 1a 00 02:46:42.431 READ DMA EXT
  125. 25 00 f8 26 5f 1d 1a 00 02:46:42.252 READ DMA EXT
  126. 25 00 08 1e 5f 1d 1a 00 02:46:42.252 READ DMA EXT
  127. 25 00 69 66 eb 6f 16 00 02:46:42.241 READ DMA EXT
  128.  
  129. Error 7 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  130. When the command that caused the error occurred, the device was active or idle.
  131.  
  132. After command completion occurred, registers were:
  133. ER ST SC SN CL CH DH
  134. -- -- -- -- -- -- --
  135. 01 51 78 78 8a de e0 Error: AMNF at LBA = 0x00de8a78 = 14584440
  136.  
  137. Commands leading to the command that caused the error were:
  138. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  139. -- -- -- -- -- -- -- -- ---------------- --------------------
  140. 29 ff 78 78 8a de 18 00 00:00:43.013 READ MULTIPLE EXT
  141. 25 ff 78 78 8a de 18 00 00:00:38.486 READ DMA EXT
  142. 29 ff 78 78 8a de 18 00 00:00:34.503 READ MULTIPLE EXT
  143. 25 ff 78 78 8a de 18 00 00:00:30.519 READ DMA EXT
  144. 29 ff 78 78 8a de 18 00 00:00:25.970 READ MULTIPLE EXT
  145.  
  146. Error 6 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  147. When the command that caused the error occurred, the device was active or idle.
  148.  
  149. After command completion occurred, registers were:
  150. ER ST SC SN CL CH DH
  151. -- -- -- -- -- -- --
  152. 01 51 78 78 8a de e0 Error: AMNF 120 sectors at LBA = 0x00de8a78 = 14584440
  153.  
  154. Commands leading to the command that caused the error were:
  155. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  156. -- -- -- -- -- -- -- -- ---------------- --------------------
  157. 25 ff 78 78 8a de 18 00 00:00:38.486 READ DMA EXT
  158. 29 ff 78 78 8a de 18 00 00:00:34.503 READ MULTIPLE EXT
  159. 25 ff 78 78 8a de 18 00 00:00:30.519 READ DMA EXT
  160. 29 ff 78 78 8a de 18 00 00:00:25.970 READ MULTIPLE EXT
  161. 25 ff 78 78 8a de 18 00 00:00:21.448 READ DMA EXT
  162.  
  163. Error 5 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  164. When the command that caused the error occurred, the device was active or idle.
  165.  
  166. After command completion occurred, registers were:
  167. ER ST SC SN CL CH DH
  168. -- -- -- -- -- -- --
  169. 01 51 78 78 8a de e0 Error: AMNF at LBA = 0x00de8a78 = 14584440
  170.  
  171. Commands leading to the command that caused the error were:
  172. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  173. -- -- -- -- -- -- -- -- ---------------- --------------------
  174. 29 ff 78 78 8a de 18 00 00:00:34.503 READ MULTIPLE EXT
  175. 25 ff 78 78 8a de 18 00 00:00:30.519 READ DMA EXT
  176. 29 ff 78 78 8a de 18 00 00:00:25.970 READ MULTIPLE EXT
  177. 25 ff 78 78 8a de 18 00 00:00:21.448 READ DMA EXT
  178. 25 ff 78 00 8a de 18 00 00:00:21.447 READ DMA EXT
  179.  
  180. SMART Self-test log structure revision number 1
  181. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  182. # 1 Short offline Completed without error 00% 5207 -
  183. # 2 Short offline Completed without error 00% 3714 -
  184.  
  185. SMART Selective self-test log data structure revision number 1
  186. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  187. 1 0 0 Not_testing
  188. 2 0 0 Not_testing
  189. 3 0 0 Not_testing
  190. 4 0 0 Not_testing
  191. 5 0 0 Not_testing
  192. Selective self-test flags (0x0):
  193. After scanning selected spans, do NOT read-scan remainder of disk.
  194. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement