Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@xbian:~# lsusb
- Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 001 Device 008: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. JM20329 SATA Bridge
- Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
- Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
- Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
- Bus 001 Device 006: ID 0bc7:0006 X10 Wireless Technology, Inc. Wireless Transceiver (ACPI-compliant)
- Bus 001 Device 007: ID 046d:c52b Logitech, Inc. Unifying Receiver
- root@xbian:~# lsusb -v -d 0bc7:0006
- Bus 001 Device 006: ID 0bc7:0006 X10 Wireless Technology, Inc. Wireless Transceiver (ACPI-compliant)
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 8
- idVendor 0x0bc7 X10 Wireless Technology, Inc.
- idProduct 0x0006 Wireless Transceiver (ACPI-compliant)
- bcdDevice 1.00
- iManufacturer 1 X10 WTI
- iProduct 2 RF receiver
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 32
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 2mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 2
- bInterfaceClass 255 Vendor Specific Class
- bInterfaceSubClass 0
- bInterfaceProtocol 0
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0008 1x 8 bytes
- bInterval 10
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x02 EP 2 OUT
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0008 1x 8 bytes
- bInterval 10
- Device Status: 0x0000
- (Bus Powered)
- root@xbian:~# dmesg
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.6.11+ (root@xbian) (gcc version 4.7.3 20121001 (prerelease) (crosstool-NG 1.17.0) ) #3 PREEMPT Tue Jan 8 22:27:29 CET 2013
- [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: BCM2708
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] On node 0 totalpages: 98304
- [ 0.000000] free_area_init_node: node 0, pgdat c056f670, node_mem_map c0619000
- [ 0.000000] Normal zone: 768 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 97536 pages, LIFO batch:31
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
- [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=624 bcm2708.boardrev=0xf bcm2708.serial=0x1e01365f smsc95xx.macaddr=B8:27:EB:01:36:5F sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty2 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait logo.nologo quiet loglevel=0 splash
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 786432 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 384MB = 384MB total
- [ 0.000000] Memory: 380688k/380688k available, 12528k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xd8800000 - 0xff000000 ( 616 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05148fc (5171 kB)
- [ 0.000000] .init : 0xc0515000 - 0xc0539dac ( 148 kB)
- [ 0.000000] .data : 0xc053a000 - 0xc05701a0 ( 217 kB)
- [ 0.000000] .bss : 0xc05701c4 - 0xc06186cc ( 674 kB)
- [ 0.000000] NR_IRQS:330
- [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty2] enabled
- [ 0.000388] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432)
- [ 0.060050] pid_max: default: 32768 minimum: 301
- [ 0.060384] Mount-cache hash table entries: 512
- [ 0.061141] Initializing cgroup subsys cpuacct
- [ 0.061168] Initializing cgroup subsys memory
- [ 0.061226] Initializing cgroup subsys devices
- [ 0.061240] Initializing cgroup subsys freezer
- [ 0.061251] Initializing cgroup subsys blkio
- [ 0.061332] CPU: Testing write buffer coherency: ok
- [ 0.061651] hw perfevents: enabled with v6 PMU driver, 3 counters available
- [ 0.061756] Setting up static identity map for 0x3b3ad8 - 0x3b3b34
- [ 0.063300] devtmpfs: initialized
- [ 0.072260] NET: Registered protocol family 16
- [ 0.077197] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.078334] bcm2708.uart_clock = 0
- [ 0.079787] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- [ 0.079806] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.079819] mailbox: Broadcom VideoCore Mailbox driver
- [ 0.079892] bcm2708_vcio: mailbox at f200b880
- [ 0.079975] bcm_power: Broadcom power driver
- [ 0.079993] bcm_power_open() -> 0
- [ 0.080004] bcm_power_request(0, 8)
- [ 0.580688] bcm_mailbox_read -> 00000080, 0
- [ 0.580705] bcm_power_request -> 0
- [ 0.580715] Serial: AMBA PL011 UART driver
- [ 0.580848] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
- [ 0.601192] bio: create slab <bio-0> at 0
- [ 0.602070] SCSI subsystem initialized
- [ 0.602292] usbcore: registered new interface driver usbfs
- [ 0.602399] usbcore: registered new interface driver hub
- [ 0.602663] usbcore: registered new device driver usb
- [ 0.604089] Switching to clocksource stc
- [ 0.604325] FS-Cache: Loaded
- [ 0.604594] CacheFiles: Loaded
- [ 0.617608] NET: Registered protocol family 2
- [ 0.618445] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.618887] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.619143] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.619189] TCP: reno registered
- [ 0.619210] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.619241] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.619517] NET: Registered protocol family 1
- [ 0.620151] RPC: Registered named UNIX socket transport module.
- [ 0.620176] RPC: Registered udp transport module.
- [ 0.620186] RPC: Registered tcp transport module.
- [ 0.620195] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.620497] Trying to unpack rootfs image as initramfs...
- [ 0.857104] Freeing initrd memory: 1988K
- [ 0.857774] bcm2708_dma: DMA manager at f2007000
- [ 0.857878] bcm2708_gpio: bcm2708_gpio_probe c0547e68
- [ 0.858276] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
- [ 0.859272] audit: initializing netlink socket (disabled)
- [ 0.859341] type=2000 audit(0.850:1): initialized
- [ 0.980099] VFS: Disk quotas dquot_6.5.2
- [ 0.980188] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.980607] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.980988] NFS: Registering the id_resolver key type
- [ 0.981153] Key type id_resolver registered
- [ 0.981169] Key type id_legacy registered
- [ 0.981526] msgmni has been set to 747
- [ 0.983634] io scheduler noop registered
- [ 0.983657] io scheduler deadline registered
- [ 0.983690] io scheduler cfq registered (default)
- [ 0.989112] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
- [ 0.989134] crc32: self tests passed, processed 225944 bytes in 2578000 nsec
- [ 0.991050] crc32c: CRC_LE_BITS = 64
- [ 0.991062] crc32c: self tests passed, processed 225944 bytes in 927000 nsec
- [ 1.010883] Console: switching to colour frame buffer device 148x39
- [ 1.029808] brd: module loaded
- [ 1.035067] loop: module loaded
- [ 1.035448] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
- [ 1.036739] usbcore: registered new interface driver smsc95xx
- [ 1.036909] usbcore: registered new interface driver cdc_ncm
- [ 1.036934] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 1.242121] Core Release: 2.80a
- [ 1.242151] Setting default values for core params
- [ 1.242205] Finished setting default values for core params
- [ 1.447315] Using Buffer DMA mode
- [ 1.447339] Periodic Transfer Interrupt Enhancement - disabled
- [ 1.447350] Multiprocessor Interrupt Enhancement - disabled
- [ 1.447363] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 1.447380] Dedicated Tx FIFOs mode
- [ 1.447598] dwc_otg: Microframe scheduler enabled
- [ 1.447654] dwc_otg bcm2708_usb: DWC OTG Controller
- [ 1.447713] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
- [ 1.447780] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
- [ 1.447853] Init: Port Power? op_state=1
- [ 1.447863] Init: Power Port (0)
- [ 1.447990] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.448015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.448032] usb usb1: Product: DWC OTG Controller
- [ 1.448048] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
- [ 1.448063] usb usb1: SerialNumber: bcm2708_usb
- [ 1.448872] hub 1-0:1.0: USB hub found
- [ 1.448920] hub 1-0:1.0: 1 port detected
- [ 1.449278] dwc_otg: FIQ enabled
- [ 1.449294] dwc_otg: NAK holdoff enabled
- [ 1.449316] Module dwc_common_port init
- [ 1.449554] Initializing USB Mass Storage driver...
- [ 1.449770] usbcore: registered new interface driver usb-storage
- [ 1.449785] USB Mass Storage support registered.
- [ 1.449929] usbcore: registered new interface driver libusual
- [ 1.450231] mousedev: PS/2 mouse device common for all mice
- [ 1.450879] bcm2835-cpufreq: min=700000 max=700000 cur=700000
- [ 1.451011] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq: switching to governor performance
- [ 1.451053] cpuidle: using governor ladder
- [ 1.451067] cpuidle: using governor menu
- [ 1.451141] sdhci: Secure Digital Host Controller Interface driver
- [ 1.451152] sdhci: Copyright(c) Pierre Ossman
- [ 1.451250] sdhci: Enable low-latency mode
- [ 1.451529] Registered led device: mmc0::
- [ 1.494361] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
- [ 1.494431] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
- [ 1.494513] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.494871] usbcore: registered new interface driver usbhid
- [ 1.494887] usbhid: USB HID core driver
- [ 1.495855] TCP: cubic registered
- [ 1.495877] Initializing XFRM netlink socket
- [ 1.495927] NET: Registered protocol family 17
- [ 1.496093] Key type dns_resolver registered
- [ 1.496590] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- [ 1.499691] registered taskstats version 1
- [ 1.505489] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 1.513469] Freeing init memory: 144K
- [ 1.566130] mmc0: could read SD Status register (SSR) at the 2th attempt
- [ 1.573963] mmc0: new high speed SDHC card at address e624
- [ 1.584403] mmcblk0: mmc0:e624 SU04G 3.69 GiB
- [ 1.587683] mmcblk0: p1 p2
- [ 1.644374] Indeed it is in host mode hprt0 = 00021501
- [ 1.884329] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 1.884498] Indeed it is in host mode hprt0 = 00001101
- [ 2.174660] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
- [ 2.174694] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.175499] hub 1-1:1.0: USB hub found
- [ 2.175655] hub 1-1:1.0: 3 ports detected
- [ 2.380802] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.454534] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 2.554914] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 2.554948] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.558006] smsc95xx v1.0.4
- [ 2.619341] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:01:36:5f
- [ 2.714416] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
- [ 2.816464] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
- [ 2.816499] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.816517] usb 1-1.3: Product: USB2.0 Hub
- [ 2.817760] hub 1-1.3:1.0: USB hub found
- [ 2.818331] hub 1-1.3:1.0: 4 ports detected
- [ 3.094554] usb 1-1.3.2: new high-speed USB device number 5 using dwc_otg
- [ 3.196242] usb 1-1.3.2: New USB device found, idVendor=05e3, idProduct=0608
- [ 3.196273] usb 1-1.3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.196292] usb 1-1.3.2: Product: USB2.0 Hub
- [ 3.197429] hub 1-1.3.2:1.0: USB hub found
- [ 3.197866] hub 1-1.3.2:1.0: 4 ports detected
- [ 3.274564] usb 1-1.3.3: new low-speed USB device number 6 using dwc_otg
- [ 3.379795] usb 1-1.3.3: New USB device found, idVendor=0bc7, idProduct=0006
- [ 3.379826] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.379844] usb 1-1.3.3: Product: RF receiver
- [ 3.379860] usb 1-1.3.3: Manufacturer: X10 WTI
- [ 3.454598] usb 1-1.3.4: new full-speed USB device number 7 using dwc_otg
- [ 3.557890] usb 1-1.3.4: New USB device found, idVendor=046d, idProduct=c52b
- [ 3.557923] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.557942] usb 1-1.3.4: Product: USB Receiver
- [ 3.557958] usb 1-1.3.4: Manufacturer: Logitech
- [ 3.644616] usb 1-1.3.2.1: new high-speed USB device number 8 using dwc_otg
- [ 3.745980] usb 1-1.3.2.1: New USB device found, idVendor=152d, idProduct=2329
- [ 3.746012] usb 1-1.3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
- [ 3.746031] usb 1-1.3.2.1: Product: USB to ATA/ATAPI bridge
- [ 3.746049] usb 1-1.3.2.1: Manufacturer: JMicron
- [ 3.746065] usb 1-1.3.2.1: SerialNumber: 322949FB5009
- [ 3.747781] usb-storage 1-1.3.2.1:1.0: Quirks match for vid 152d pid 2329: 8020
- [ 3.747952] scsi0 : usb-storage 1-1.3.2.1:1.0
- [ 4.766760] scsi 0:0:0:0: Direct-Access SAMSUNG HM750LI 2AM1 PQ: 0 ANSI: 2 CCS
- [ 4.768874] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- [ 4.769758] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.769797] sd 0:0:0:0: [sda] Mode Sense: 28 00 00 00
- [ 4.770722] sd 0:0:0:0: [sda] No Caching mode page present
- [ 4.770754] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 4.773980] sd 0:0:0:0: [sda] No Caching mode page present
- [ 4.774016] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 5.109823] sda: sda1
- [ 5.115909] sd 0:0:0:0: [sda] No Caching mode page present
- [ 5.115946] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 5.115967] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 6.536776] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.3.4/input2
- [ 6.551080] input: Logitech Unifying Device. Wireless PID:4024 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.2/0003:046D:C52B.0003/input/input0
- [ 6.557439] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-bcm2708_usb-1.3.4:1
- [ 9.464625] fuse init (API version 7.20)
- [ 13.001691] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 13.643556] bcm2835 ALSA card created!
- [ 13.643852] bcm2835 ALSA chip created!
- [ 13.644042] bcm2835 ALSA chip created!
- [ 13.644317] bcm2835 ALSA chip created!
- [ 13.644533] bcm2835 ALSA chip created!
- [ 13.644723] bcm2835 ALSA chip created!
- [ 13.644910] bcm2835 ALSA chip created!
- [ 13.646566] bcm2835 ALSA chip created!
- [ 13.754792] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
- [ 18.338869] Adding 127996k swap on /var/swapfile. Priority:-1 extents:3 across:160764k SS
- [ 23.311512] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- [ 23.330115] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 32.431913] watchdog stopped
- root@xbian:~# cat /proc/bus/input/devices
- I: Bus=0003 Vendor=046d Product=c52b Version=0111
- N: Name="Logitech Unifying Device. Wireless PID:4024"
- P: Phys=usb-bcm2708_usb-1.3.4:1
- S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.2/0003:046D:C52B.0003/input/input0
- U: Uniq=
- H: Handlers=sysrq kbd mouse0 event0
- B: PROP=0
- B: EV=12001f
- B: KEY=4837fff 72ff32d bf544446 0 0 ffff0001 30f90 8b17c007 ffff7bfa d9415fff febeffdf ffefffff ffffffff fffffffe
- B: REL=1c3
- B: ABS=1 0
- B: MSC=10
- B: LED=1f
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement