Advertisement
playfulgod

Untitled

May 11th, 2013
61
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 76.63 KB | None | 0 0
  1. <6>[ 0.000000] Booting Linux on physical CPU 0
  2. <6>[ 0.000000] Initializing cgroup subsys cpu
  3. <5>[ 0.000000] Linux version 3.0.21-gaa2754e (jinwooc.choi@LGEARND3U3) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Jan 2 17:19:02 KST 2013
  4. <4>[ 0.000000] CPU: ARMv7 Processor [511f04d4] revision 4 (ARMv7), cr=10c5387d
  5. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. <4>[ 0.000000] Machine: LGE MSM8960 L1
  7. <6>[ 0.000000] memory pool 3 (start 0xbf300000 size 0xd00000) initialized
  8. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  9. <6>[ 0.000000] socinfo_init: v6, id=87, ver=4.1, raw_id=1713, raw_ver=7, hw_plat=0, hw_plat_ver=65536
  10. <6>[ 0.000000] accessory_chip=0 hw_plat_subtype=0
  11. <4>[ 0.000000] Zone PFN ranges:
  12. <4>[ 0.000000] Normal 0x00080200 -> 0x000a8b00
  13. <4>[ 0.000000] HighMem 0x000a8b00 -> 0x000c0000
  14. <4>[ 0.000000] Movable zone start PFN for each node
  15. <4>[ 0.000000] early_node_map[3] active PFN ranges
  16. <4>[ 0.000000] 0: 0x00080200 -> 0x00088800
  17. <4>[ 0.000000] 0: 0x00090100 -> 0x0009fe00
  18. <4>[ 0.000000] 0: 0x000a7500 -> 0x000bf300
  19. <7>[ 0.000000] On node 0 totalpages: 196864
  20. <7>[ 0.000000] Normal zone: 1298 pages used for memmap
  21. <7>[ 0.000000] Normal zone: 0 pages reserved
  22. <7>[ 0.000000] Normal zone: 103406 pages, LIFO batch:31
  23. <7>[ 0.000000] HighMem zone: 720 pages used for memmap
  24. <7>[ 0.000000] HighMem zone: 91440 pages, LIFO batch:31
  25. <6>[ 0.000000] allocating 6406144 bytes at c1862000 (81a62000 physical) for fb
  26. <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1e81000 s10816 r8192 d13760 u32768
  27. <7>[ 0.000000] pcpu-alloc: s10816 r8192 d13760 u32768 alloc=8*4096
  28. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  29. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194846
  30. <5>[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=l1m lpj=67668 uart_console=disable lge.rev=rev_10 lcd_maker_id=primary gpt=enable lge.batt_info=ds2704_l lge_handle_panic.hreset_enable=1 androidboot.emmc=true androidboot.serialno=13889636 lge.signed_image=true androidboot.baseband=msm
  31. <6>[ 0.000000] UART CONSOLE : disable
  32. <6>[ 0.000000] BOARD : LGE rev_10
  33. <6>[ 0.000000] LCD Maker ID : primary
  34. <6>[ 0.000000] Battery : ds2704_l 32
  35. <6>[ 0.000000] hidden reset activated
  36. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  37. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  38. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  39. <6>[ 0.000000] Memory: 134MB 253MB 382MB = 769MB total
  40. <5>[ 0.000000] Memory: 756672k/891840k available, 30784k reserved, 368640K highmem
  41. <5>[ 0.000000] Virtual kernel memory layout:
  42. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  43. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  44. <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  45. <5>[ 0.000000] vmalloc : 0xe1800000 - 0xfa000000 ( 392 MB)
  46. <5>[ 0.000000] lowmem : 0xc0000000 - 0xe1000000 ( 528 MB)
  47. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  48. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  49. <5>[ 0.000000] .init : 0xc0008000 - 0xc0100000 ( 992 kB)
  50. <5>[ 0.000000] .text : 0xc0100000 - 0xc0b727dc (10698 kB)
  51. <5>[ 0.000000] .data : 0xc0c00000 - 0xc0cd96b8 ( 870 kB)
  52. <5>[ 0.000000] .bss : 0xc0cd96dc - 0xc0ecb88c (1993 kB)
  53. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  54. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  55. <6>[ 0.000000] NR_IRQS:873
  56. <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  57. <6>[ 0.000000] Console: colour dummy device 80x30
  58. <6>[ 0.000152] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67668)
  59. <6>[ 0.000183] pid_max: default: 32768 minimum: 301
  60. <6>[ 0.000488] Mount-cache hash table entries: 512
  61. <6>[ 0.001373] Initializing cgroup subsys debug
  62. <6>[ 0.001403] Initializing cgroup subsys cpuacct
  63. <6>[ 0.001464] Initializing cgroup subsys freezer
  64. <6>[ 0.001526] CPU: Testing write buffer coherency: ok
  65. <6>[ 0.001800] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  66. <4>[ 0.001861] set_dload_mode: skip_dload_magic
  67. <6>[ 0.010163] Brought up 2 CPUs
  68. <6>[ 0.010193] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  69. <6>[ 0.023775] print_constraints: dummy:
  70. <6>[ 0.024080] NET: Registered protocol family 16
  71. <3>[ 0.024233] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  72. <6>[ 0.026155] meminfo_init: smem ram ptable found: ver: 0 len: 5
  73. <6>[ 0.026186] Found 1 memory banks grouped into 8 memory regions
  74. <6>[ 0.026491] msm_rpm_init: RPM firmware 3.0.16842893
  75. <6>[ 0.045597] saw_probe: id=0, name=8921_s5
  76. <6>[ 0.045902] saw_probe: id=1, name=8921_s6
  77. <6>[ 0.046207] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
  78. <6>[ 0.046513] gpio_vreg_probe: id=91, name=ext_l2, gpio=91, gpio_label=ext_l2_en
  79. <6>[ 0.046757] pm8921_probe: PMIC revision 1: F4
  80. <6>[ 0.046787] pm8921_probe: PMIC revision 2: 06
  81. <6>[ 0.046787] pm8921_probe: PMIC version: PM8921 rev 3.0
  82. <6>[ 0.046818] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  83. <6>[ 0.048527] pm_gpio_probe: OK: base=152, ngpio=44
  84. <6>[ 0.048802] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  85. <6>[ 0.053319] gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label=ext_otg_sw_en
  86. <6>[ 0.064397] get_pvs: ACPU PVS: Fast
  87. <6>[ 0.064428] select_freq_plan: Max ACPU freq: 1512000 KHz
  88. <6>[ 0.067450] cpufreq_table_init: CPU0: 12 scaling frequencies supported.
  89. <6>[ 0.067450] cpufreq_table_init: CPU1: 12 scaling frequencies supported.
  90. <6>[ 0.067938] panel_gpiomux_init : msm_gpiomux_init is already initialized
  91. <6>[ 0.068060] lge_add_lcd_devices lm3530 init
  92. <6>[ 0.068487] lge_hsd_fsa8008_init
  93. <3>[ 0.068579] lge_add_camera_devices: E
  94. <3>[ 0.069281] lge_add_camera_devices: X
  95. <4>[ 0.069555] bcm_wifi_init_gpio_mem successfully
  96. <6>[ 0.069616] Unified Kernel for LGE_PM
  97. <4>[ 0.069647] RAM CONSOLE START ADDR : 0x88800000
  98. <4>[ 0.069647] RAM CONSOLE END ADDR : 0x8883dfff
  99. <6>[ 0.069739] ram_console: got buffer at 88800000, size 3e000
  100. <6>[ 0.069800] ram_console: found existing buffer, size 65983, start 65983
  101. <6>[ 0.244834] console [ram-1] enabled
  102. <6>[ 0.244895] CRASH LOG START ADDR : 8883e000
  103. <6>[ 0.245017] CRASH LOG END ADDR : 8883efff
  104. <6>[ 0.245078] ADDITIONAL INFO ADDR : 88840000
  105. <6>[ 0.246940] QDSS arch initialized
  106. <6>[ 0.249809] sps:REVISION of BAM 0xe1830000 is 0x5.
  107. <6>[ 0.249900] sps:BAM 0x12244000 is registered.
  108. <6>[ 0.250358] sps:sps is ready.
  109. <6>[ 0.252433] iommu_dev: device vpe mapped at e1c00000, with 2 ctx banks
  110. <6>[ 0.252708] iommu_dev: device mdp0 mapped at e1e00000, with 2 ctx banks
  111. <6>[ 0.252952] iommu_dev: device mdp1 mapped at e2000000, with 2 ctx banks
  112. <6>[ 0.253135] iommu_dev: device rot mapped at e2200000, with 2 ctx banks
  113. <6>[ 0.253380] iommu_dev: device ijpeg mapped at e2400000, with 2 ctx banks
  114. <6>[ 0.253624] iommu_dev: device vfe mapped at e2600000, with 2 ctx banks
  115. <6>[ 0.253807] iommu_dev: device vcodec_a mapped at e2800000, with 2 ctx banks
  116. <6>[ 0.254051] iommu_dev: device vcodec_b mapped at e2a00000, with 2 ctx banks
  117. <6>[ 0.254265] iommu_dev: device gfx3d mapped at e2c00000, with 3 ctx banks
  118. <6>[ 0.254539] iommu_dev: device jpegd mapped at e2e00000, with 2 ctx banks
  119. <6>[ 0.254814] iommu_dev: device gfx2d0 mapped at e3000000, with 2 ctx banks
  120. <6>[ 0.255058] iommu_dev: device gfx2d1 mapped at e3200000, with 2 ctx banks
  121. <6>[ 0.255363] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  122. <6>[ 0.255577] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  123. <6>[ 0.255852] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  124. <6>[ 0.256126] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  125. <6>[ 0.256340] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  126. <6>[ 0.256584] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  127. <6>[ 0.256859] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  128. <6>[ 0.257073] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  129. <6>[ 0.257347] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  130. <6>[ 0.257561] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  131. <6>[ 0.257836] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  132. <6>[ 0.258080] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  133. <6>[ 0.258293] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  134. <6>[ 0.258568] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  135. <6>[ 0.258782] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  136. <6>[ 0.259087] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  137. <6>[ 0.259392] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  138. <6>[ 0.259575] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  139. <6>[ 0.259850] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  140. <6>[ 0.260094] msm_iommu_ctx msm_iommu_ctx.19: context gfx2d0_2d0 using bank 0
  141. <6>[ 0.260369] msm_iommu_ctx msm_iommu_ctx.20: context gfx2d1_2d1 using bank 0
  142. <6>[ 0.272546] bio: create slab <bio-0> at 0
  143. <6>[ 0.273035] ION heap vmalloc created
  144. <6>[ 0.273096] ION heap mm created at a0000000 with size 7400000
  145. <6>[ 0.273248] ION heap mm_fw created at 9fe00000 with size 1e0000
  146. <6>[ 0.273309] ION heap mfc created at a7400000 with size 2000
  147. <6>[ 0.273432] ION heap iommu created
  148. <6>[ 0.273523] ION heap qsecom created at bf303000 with size 780000
  149. <6>[ 0.273676] ION heap audio created at bfa83000 with size 4cf000
  150. <5>[ 0.274195] pm8xxx_pwm_probe: OK
  151. <5>[ 0.274591] SCSI subsystem initialized
  152. <6>[ 0.274744] sps:REVISION of BAM 0xe183c000 is 0x12.
  153. <6>[ 0.274896] sps:BAM 0x28084000 is registered.
  154. <6>[ 0.275690] usbcore: registered new interface driver usbfs
  155. <6>[ 0.275873] usbcore: registered new interface driver hub
  156. <6>[ 0.276087] usbcore: registered new device driver usb
  157. <4>[ 0.276209] ts_info_init : ts_info calss create
  158. <7>[ 0.276545] Registered led device: button-backlight
  159. <6>[ 0.276911] Advanced Linux Sound Architecture Driver Version 1.0.24.
  160. <6>[ 0.277277] Bluetooth: Core ver 2.16
  161. <6>[ 0.277430] NET: Registered protocol family 31
  162. <6>[ 0.277491] Bluetooth: HCI device and connection manager initialized
  163. <6>[ 0.277613] Bluetooth: HCI socket layer initialized
  164. <6>[ 0.277704] Bluetooth: L2CAP socket layer initialized
  165. <6>[ 0.277949] Bluetooth: SCO socket layer initialized
  166. <6>[ 0.278254] cfg80211: Calling CRDA to update world regulatory domain
  167. <6>[ 0.278864] Switching to clocksource gp_timer
  168. <6>[ 0.283076] NET: Registered protocol family 2
  169. <6>[ 0.283229] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  170. <6>[ 0.283595] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  171. <6>[ 0.284083] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  172. <6>[ 0.284541] TCP: Hash tables configured (established 65536 bind 65536)
  173. <6>[ 0.284694] TCP reno registered
  174. <6>[ 0.284755] UDP hash table entries: 256 (order: 1, 8192 bytes)
  175. <6>[ 0.284877] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  176. <6>[ 0.285273] NET: Registered protocol family 1
  177. <6>[ 0.285548] Trying to unpack rootfs image as initramfs...
  178. <6>[ 0.354768] Freeing initrd memory: 1600K
  179. <6>[ 0.355012] PMU: registered new PMU device of type 0
  180. <6>[ 0.355287] PMU: registered new PMU device of type 1
  181. <6>[ 0.355653] QDSS module initialized
  182. <6>[ 0.355959] msm_etb msm_etb.0: ETB initialized
  183. <6>[ 0.356172] msm_tpiu msm_tpiu.0: TPIU initialized
  184. <6>[ 0.356386] msm_funnel msm_funnel.0: FUNNEL initialized
  185. <6>[ 0.357729] msm_etm msm_etm.0: ETM initialized
  186. <6>[ 0.358675] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  187. <6>[ 0.359835] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
  188. <6>[ 0.360933] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
  189. <6>[ 0.362307] pil_riva pil_riva: using secure boot
  190. <6>[ 0.363985] pil_dsps pil_dsps: using secure boot
  191. <3>[ 0.365298] smd_channel_probe_worker: allocation table not initialized
  192. <6>[ 0.368625] msm_dsps driver version 4.02.
  193. <6>[ 0.369571] NET: Registered protocol family 27
  194. <6>[ 0.370151] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
  195. <6>[ 0.371524] modem_8960_init: modem fatal driver init'ed.
  196. <6>[ 0.371677] lpass_fatal_init: lpass SSR driver init'ed.
  197. <3>[ 0.371799] lgps3_rfkill_init
  198. <3>[ 0.372012] lgps3_rfkill_init done
  199. <3>[ 0.372195] lgps3_rfkill_probe
  200. <3>[ 0.372287] bluetooth_set_power set blocked=1
  201. <6>[ 0.372592] lge_panic_handler: got buffer at 8883e000, size 1000
  202. <6>[ 0.372928] kcal_ctrl_init
  203. <5>[ 0.373508] msm_rpm_log_probe: OK
  204. <6>[ 0.375064] usbcore: registered new interface driver hsic_sysmon
  205. <4>[ 0.390904] highmem bounce pool size: 64 pages
  206. <6>[ 0.391210] ashmem: initialized
  207. <6>[ 0.394658] Hook version: 3.0.17 2012/01/13
  208. <6>[ 0.396703] fuse init (API version 7.16)
  209. <6>[ 0.397039] msgmni has been set to 761
  210. <6>[ 0.398748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  211. <6>[ 0.398870] io scheduler noop registered
  212. <6>[ 0.398962] io scheduler deadline registered
  213. <6>[ 0.399084] io scheduler cfq registered (default)
  214. <4>[ 0.399511] lm3530_probe: i2c probe start
  215. <6>[ 0.403113] mipi_dsi base phy_addr = 0x4700000 virt = 0xe3400000
  216. <6>[ 0.403265] mmss_sfpb base phy_addr = 0x5700000,virt = 0xe18f8000
  217. <6>[ 0.403784] mipi_hitachi_lcd_probe: mipi hitachi lcd probe start
  218. <6>[ 0.403937] setting pdata->panel_info.fb_num to 3. type: 8
  219. <6>[ 0.406134] FrameBuffer[0] 540x960 size=6266880 bytes is registered successfully!
  220. <3>[ 0.406256] pm_runtime: fail to wake up
  221. <3>[ 0.429238] regulator_check_drms: 8921_lvs6: operation not allowed
  222. <6>[ 0.457958] mipi_hitachi_lcd_on: mipi hitachi lcd on started
  223. <6>[ 0.602472] load_888rle_image: load_888rle_image filename: /initlogo.rle
  224. <4>[ 0.631191] Level at Driver 112
  225. <4>[ 0.631588] lm3530_set_main_current_level() :level is : 112, cal_value is : 0x70
  226. <7>[ 0.649443] Registered led device: lcd-backlight
  227. <6>[ 0.649992] setting pdata->panel_info.fb_num to 1. type: 10
  228. <3>[ 0.650206] Inside writeback_driver_init
  229. <3>[ 0.650419] Inside writeback_probe
  230. <6>[ 0.650846] FrameBuffer[1] 1280x720 size=0 bytes is registered successfully!
  231. <6>[ 0.651823]
  232. <6>[ 0.651823] msm_vidc_enc: Inside vid_enc_init()
  233. <6>[ 0.652098]
  234. <6>[ 0.652098] msm_vidc_enc: Inside vid_enc_vcd_init()
  235. <3>[ 0.719273] smux_ctl: smux_ctl_init Begins
  236. <6>[ 0.719792] msm_serial: driver initialized
  237. <6>[ 0.720189] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  238. <6>[ 0.809369] msm_serial_hs module loaded
  239. <6>[ 0.809674] msm_serial_hsl: driver initialized
  240. <6>[ 0.810712] msm_rotator_probe: rotator_hw_revision=2
  241. <6>[ 0.811750] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  242. <6>[ 0.812879] kgsl kgsl-2d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  243. <6>[ 0.813734] kgsl kgsl-2d1: |kgsl_iommu_init| MMU type set for device is IOMMU
  244. <6>[ 0.817854] brd: module loaded
  245. <6>[ 0.819746] loop: module loaded
  246. <4>[ 0.821364] pm8xxx_cradle_probe : init cradle
  247. <6>[ 0.821638] tabla-slim tabla-slim: Initialized slim device tabla-slim
  248. <3>[ 0.909323] fail to get slimbus logical address -6
  249. <6>[ 0.911338] tabla2x-slim tabla2x-slim: Initialized slim device tabla2x-slim
  250. <6>[ 1.005646] wcd9xxx_device_init : Codec version 2 initialized
  251. <6>[ 1.005768] idbyte_0[00000002] idbyte_1[00000000] idbyte_2[00000000] idbyte_3[00000001]
  252. <4>[ 1.006134] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  253. <4>[ 1.006256] i2c-core: driver [tabla-i2c-core] using legacy resume method
  254. <6>[ 1.007233] SCSI Media Changer driver v0.25
  255. <6>[ 1.008087] PPP generic driver version 2.4.2
  256. <6>[ 1.008301] PPP Deflate Compression module registered
  257. <6>[ 1.008454] PPP BSD Compression module registered
  258. <6>[ 1.009064] PPP MPPE Compression module registered
  259. <6>[ 1.009217] NET: Registered protocol family 24
  260. <6>[ 1.009308] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  261. <6>[ 1.009430] CSLIP: code copyright 1989 Regents of the University of California.
  262. <6>[ 1.009797] tun: Universal TUN/TAP device driver, 1.6
  263. <6>[ 1.009919] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  264. <6>[ 1.010132] rmnet_init: BAM devices[8]
  265. <6>[ 1.013459] usbcore: registered new interface driver usb_ehset_test
  266. <6>[ 1.013581] usbcore: registered new interface driver mdm_bridge
  267. <6>[ 1.013825] u_lgeusb init
  268. <6>[ 1.015412] diagchar initialized now
  269. <6>[ 1.015504] MTS_TTY: mtsk_tty_init
  270. <6>[ 1.016145] mtsk_tty_init SUCESS MTS_TTY_REGISTERED
  271. <6>[ 1.016206] DM_APP: lge_dm_tty_init
  272. <6>[ 1.017274] input: keypad-8960 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input0
  273. <4>[ 1.017915] [touch] enter touch probe
  274. <4>[ 1.018068] maker_id_val = 0[TOUCH]SYNAPTICS power ON
  275. <6>[ 1.269922] input: synaptics_ts as /devices/virtual/input/input1
  276. <6>[ 1.278254] [Touch] common[1] finger[17] flash[52] button[26]
  277. <6>[ 1.287044] [Touch] Synaptics PLG143(Interrupt mode): ID[1], FW rev[0], f/u[0]
  278. <6>[ 1.287166] [Touch] irq_pin[1] next_work[0] ghost_stage[0x0]
  279. <6>[ 1.287410] [Touch] fw_rev[0:0] product_id[PLG143:S7020] force_upgrade[0]
  280. <6>[ 1.287471] [Touch] Touch driver is initialized
  281. <4>[ 1.287471] [touch] leave touch probe
  282. <6>[ 1.287685] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input2
  283. <6>[ 1.287715] [Touch] FW-upgrade is not executed
  284. <4>[ 1.288448] ######## bthid_init: ########
  285. <4>[ 1.288631] ######## bthid_init: done ########
  286. <6>[ 1.289485] using rtc device, pm8xxx_rtc, for alarms
  287. <6>[ 1.289638] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  288. <6>[ 1.290187] i2c /dev entries driver
  289. <6>[ 1.291042] Linux media interface: v0.10
  290. <6>[ 1.291194] lirc_dev: IR Remote Control driver registered, major 235
  291. <6>[ 1.291316] IR NEC protocol handler initialized
  292. <6>[ 1.291408] IR RC5(x) protocol handler initialized
  293. <6>[ 1.291530] IR RC6 protocol handler initialized
  294. <6>[ 1.291591] IR JVC protocol handler initialized
  295. <6>[ 1.291652] IR Sony protocol handler initialized
  296. <6>[ 1.291744] [Touch] Synaptics PLG143(Interrupt mode): ID[1], FW rev[0], f/u[0]
  297. <6>[ 1.291744] [Touch] irq_pin[1] next_work[0] ghost_stage[0x0]
  298. <6>[ 1.291957] IR RC5 (streamzap) protocol handler initialized
  299. <6>[ 1.292018] IR LIRC bridge handler initialized
  300. <6>[ 1.292141] Linux video capture interface: v2.00
  301. <6>[ 1.292476] usbcore: registered new interface driver uvcvideo
  302. <6>[ 1.292598] USB Video Class driver (v1.1.0)
  303. <4>[ 1.293422] msm_sensor_init_module s5k4e1
  304. <4>[ 1.293514] s5k4e1_sensor_power_up: E, 691
  305. <4>[ 1.295193] s5k4e1_sensor_power_up: msm_camera_enable_vreg, 723
  306. <3>[ 1.329497] s5k4e1_sensor_power_up: Turning on VCMEN for L1m project
  307. <4>[ 1.329620] s5k4e1_sensor_power_up: X, 760
  308. <3>[ 1.329986] msm_eeprom_probe probe_fail
  309. <6>[ 1.330535] msm_sensor_register mctl_node_name[0] = video1
  310. <4>[ 1.330596] s5k4e1_sensor_power_down: E, 784
  311. <3>[ 1.330688] msm_sensor_stop_stream: E
  312. <3>[ 1.360506] s5k4e1_sensor_power_down: Turning off VCMEN for L1m project
  313. <4>[ 1.360567] s5k4e1_sensor_power_down: X, 816
  314. <3>[ 1.360750] msm_sensor_power_up: E: imx119
  315. <3>[ 1.371188] msm_sensor_power_up: X
  316. <3>[ 1.371463] msm_eeprom_probe probe_fail
  317. <6>[ 1.371921] msm_sensor_register mctl_node_name[1] = video3
  318. <3>[ 1.372012] msm_sensor_power_down: E: imx119
  319. <3>[ 1.373142] msm_sensor_power_down: X
  320. <3>[ 1.375095] lm3559_init: start
  321. <3>[ 1.375186] lm3559_probe: start
  322. <7>[ 1.375309] Registered led device: spotlight
  323. <6>[ 1.376896] max17043 5-0036: MAX17043 Fuel-Gauge Ver 17
  324. <3>[ 1.377262] error reading adc channel = 8, ret = -19
  325. <4>[ 1.377750] i2c-core: driver [max17043] using legacy suspend method
  326. <4>[ 1.377811] i2c-core: driver [max17043] using legacy resume method
  327. <6>[ 1.399389] pm8xxx_tm_probe: OK
  328. <6>[ 1.399999] device-mapper: uevent: version 1.0.3
  329. <6>[ 1.400427] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  330. <6>[ 1.400701] Bluetooth: HCI UART driver ver 2.2
  331. <6>[ 1.400824] Bluetooth: HCI H4 protocol initialized
  332. <6>[ 1.400885] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  333. <6>[ 1.401281] cpuidle: using governor ladder
  334. <6>[ 1.401434] cpuidle: using governor menu
  335. <6>[ 1.402136] mmc0: mci-version: 18
  336. <6>[ 1.403204] mmc0: bam physical base=0x12402000
  337. <6>[ 1.403326] mmc0: bam virtual base=0xe1b08000
  338. <6>[ 1.403387] sps:BAM 0x12402000 is registered.
  339. <6>[ 1.403509] mmc0: BAM device registered. bam_handle=0xe062bc00
  340. <6>[ 1.403723] sps:REVISION of BAM 0xe1b08000 is 0x5.
  341. <6>[ 1.404089] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  342. <6>[ 1.404181] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  343. <3>[ 1.404333] mmc0: No card detect facilities available
  344. <4>[ 1.404883] msmsdcc_setup_pwr: sd io pull up is high voltage so change the voltage to High Level
  345. <6>[ 1.405463] [LGE][MMC][mmc_rescan ( ) START!]
  346. <6>[ 1.405646] [LGE][mmc][mmc_detect_change ( )] result_delayed_work:1, delay:0
  347. <6>[ 1.405768] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  348. <6>[ 1.405890] mmc0: 8 bit data mode enabled
  349. <6>[ 1.406012] mmc0: 4 bit data mode disabled
  350. <6>[ 1.406073] mmc0: polling status mode disabled
  351. <6>[ 1.406195] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  352. <6>[ 1.406287] mmc0: Slot eject status = 0
  353. <6>[ 1.406409] mmc0: Power save feature enable = 1
  354. <6>[ 1.406470] mmc0: SPS-BAM data transfer mode available
  355. <6>[ 1.407446] mmc1: mci-version: 18
  356. <6>[ 1.410529] mmc1: bam physical base=0x12182000
  357. <6>[ 1.410590] mmc1: bam virtual base=0xe1b68000
  358. <6>[ 1.410712] sps:BAM 0x12182000 is registered.
  359. <6>[ 1.410773] mmc1: BAM device registered. bam_handle=0xe07aa200
  360. <6>[ 1.410987] sps:REVISION of BAM 0xe1b68000 is 0x5.
  361. <6>[ 1.411323] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
  362. <6>[ 1.411384] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
  363. <4>[ 1.412269] msmsdcc_setup_pwr: sd io pull up is high voltage so change the voltage to High Level
  364. <6>[ 1.412849] [LGE][mmc][mmc_detect_change ( )] result_delayed_work:1, delay:0
  365. <6>[ 1.412910] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
  366. <6>[ 1.413062] mmc1: 8 bit data mode disabled
  367. <6>[ 1.413123] mmc1: 4 bit data mode enabled
  368. <6>[ 1.413245] mmc1: polling status mode disabled
  369. <6>[ 1.413306] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
  370. <6>[ 1.413428] mmc1: Slot eject status = 0
  371. <6>[ 1.413490] mmc1: Power save feature enable = 1
  372. <6>[ 1.413581] mmc1: SPS-BAM data transfer mode available
  373. <6>[ 1.414191] mmc2: mci-version: 18
  374. <6>[ 1.414741] mmc2: bam physical base=0x121c2000
  375. <6>[ 1.414863] mmc2: bam virtual base=0xe1ba4000
  376. <6>[ 1.414924] sps:BAM 0x121c2000 is registered.
  377. <6>[ 1.414985] mmc2: BAM device registered. bam_handle=0xe07aa800
  378. <6>[ 1.415260] sps:REVISION of BAM 0xe1ba4000 is 0x5.
  379. <6>[ 1.415565] mmc2: Qualcomm MSM SDCC-BAM at 0x00000000121c2000 irq 127
  380. <6>[ 1.415687] mmc2: Qualcomm MSM SDCC-DML at 0x00000000121c0800
  381. <4>[ 1.415901] msmsdcc_setup_pwr: sd io pull up is high voltage so change the voltage to High Level
  382. <6>[ 1.416481] [LGE][mmc][mmc_detect_change ( )] result_delayed_work:1, delay:0
  383. <6>[ 1.416603] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma -1 dmacrcri -1
  384. <6>[ 1.416725] mmc2: 8 bit data mode disabled
  385. <6>[ 1.416816] mmc2: 4 bit data mode enabled
  386. <6>[ 1.416877] mmc2: polling status mode disabled
  387. <6>[ 1.416999] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  388. <6>[ 1.417060] mmc2: Slot eject status = 1
  389. <6>[ 1.417121] mmc2: Power save feature enable = 1
  390. <6>[ 1.417274] mmc2: SPS-BAM data transfer mode available
  391. <6>[ 1.419166] usbcore: registered new interface driver usbhid
  392. <6>[ 1.419288] usbhid: USB HID core driver
  393. <6>[ 1.419960] logger: created 256K log 'log_main'
  394. <6>[ 1.420204] logger: created 256K log 'log_events'
  395. <6>[ 1.420387] logger: created 256K log 'log_radio'
  396. <6>[ 1.420540] logger: created 256K log 'log_system'
  397. <6>[ 1.421272] usbcore: registered new interface driver snd-usb-audio
  398. <6>[ 1.422554] tpa2028d_amp_probe()
  399. <6>[ 1.422707] tpa2028d_amp chip found
  400. <6>[ 1.422798] amp_enable: amp enable bypass(2)
  401. <6>[ 1.422890] amp_enable: AMP_EN is set to 0
  402. <6>[ 1.423531] msm_pcm_probe: dev name msm-voip-dsp
  403. <6>[ 1.424233] msm_pcm_probe: dev name msm-pcm-dsp
  404. <6>[ 1.424446] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  405. <6>[ 1.425057] msm_compr_probe: dev name msm-compr-dsp
  406. <6>[ 1.425423] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  407. <6>[ 1.453654] asoc: null-codec-dai <-> MultiMedia1 mapping ok
  408. <6>[ 1.489851] asoc: null-codec-dai <-> MultiMedia2 mapping ok
  409. <6>[ 1.497726] asoc: null-codec-dai <-> CS-VOICE mapping ok
  410. <6>[ 1.505569] asoc: null-codec-dai <-> VoIP mapping ok
  411. <6>[ 1.513413] asoc: null-codec-dai <-> MultiMedia3 mapping ok
  412. <6>[ 1.521257] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
  413. <6>[ 1.529131] asoc: null-codec-dai <-> INT_FM_HOSTLESS mapping ok
  414. <6>[ 1.536914] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  415. <6>[ 1.544758] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  416. <6>[ 1.552571] asoc: null-codec-dai <-> MultiMedia4 mapping ok
  417. <6>[ 1.560445] asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok
  418. <6>[ 1.568228] asoc: null-codec-dai <-> HDMI_HOSTLESS mapping ok
  419. <6>[ 1.576133] asoc: null-codec-dai <-> VoLTE mapping ok
  420. <6>[ 1.583946] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  421. <6>[ 1.591820] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  422. <6>[ 1.599603] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  423. <6>[ 1.607446] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  424. <6>[ 1.615229] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  425. <6>[ 1.623103] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  426. <6>[ 1.630947] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  427. <6>[ 1.635556] mmc0: new high speed DDR MMC card at address 0001
  428. <6>[ 1.635617] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:MMC
  429. <6>[ 1.636105] mmcblk0: mmc0:0001 008G4B 7.28 GiB
  430. <6>[ 1.639035] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  431. <6>[ 1.641782] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31
  432. <6>[ 1.644285] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
  433. <6>[ 1.644437] [LGE][MMC][mmc_rescan ( ) START!]
  434. <6>[ 1.647062] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
  435. <6>[ 1.654936] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
  436. <6>[ 1.662749] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
  437. <6>[ 1.679993] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  438. <6>[ 1.688936] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  439. <6>[ 1.697909] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  440. <6>[ 1.706882] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  441. <6>[ 1.707797] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  442. <6>[ 1.708042] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  443. <6>[ 1.712253] ALSA device list:
  444. <6>[ 1.712314] #0: msm8960-snd-card
  445. <6>[ 1.712955] oprofile: using arm/armv7-krait
  446. <6>[ 1.713139] u32 classifier
  447. <6>[ 1.713200] Actions configured
  448. <6>[ 1.713322] Netfilter messages via NETLINK v0.30.
  449. <6>[ 1.713444] nf_conntrack version 0.5.0 (11848 buckets, 47392 max)
  450. <6>[ 1.713932] ctnetlink v0.93: registering with nfnetlink.
  451. <6>[ 1.714024] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  452. <6>[ 1.714146] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  453. <6>[ 1.714573] xt_time: kernel timezone is -0000
  454. <6>[ 1.714817] ip_tables: (C) 2000-2006 Netfilter Core Team
  455. <6>[ 1.715000] arp_tables: (C) 2002 David S. Miller
  456. <6>[ 1.715092] TCP cubic registered
  457. <6>[ 1.715214] Initializing XFRM netlink socket
  458. <6>[ 1.715702] NET: Registered protocol family 10
  459. <6>[ 1.716740] Mobile IPv6
  460. <6>[ 1.716893] ip6_tables: (C) 2000-2006 Netfilter Core Team
  461. <6>[ 1.717045] IPv6 over IPv4 tunneling driver
  462. <6>[ 1.717533] NET: Registered protocol family 17
  463. <6>[ 1.717625] NET: Registered protocol family 15
  464. <6>[ 1.719487] Bluetooth: RFCOMM TTY layer initialized
  465. <6>[ 1.719639] Bluetooth: RFCOMM socket layer initialized
  466. <6>[ 1.719700] Bluetooth: RFCOMM ver 1.11
  467. <6>[ 1.719792] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  468. <6>[ 1.719853] Bluetooth: BNEP filters: protocol
  469. <6>[ 1.719914] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  470. <6>[ 1.720128] L2TP core driver, V2.0
  471. <6>[ 1.720219] PPPoL2TP kernel driver, V2.0
  472. <5>[ 1.720341] Registering the dns_resolver key type
  473. <6>[ 1.720585] msm_otg msm_otg: msm_otg probe
  474. <6>[ 1.720708] msm_otg msm_otg: OTG regs = e1be0000
  475. <6>[ 1.736151] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  476. <6>[ 1.736365] msm_otg msm_otg: Host mode is not supported
  477. <3>[ 1.736487] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  478. <6>[ 1.737341] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  479. <6>[ 1.737555] mbim_init: initialize 1 instances
  480. <6>[ 1.737952] mbim_init: Initialized 1 ports
  481. <6>[ 1.739508] android_usb gadget: Mass Storage Function, version: 2009/09/11
  482. <6>[ 1.739569] android_usb gadget: Number of LUNs=2
  483. <6>[ 1.739722] lun0: LUN: removable file: (no medium)
  484. <6>[ 1.739813] lun1: LUN: removable file: (no medium)
  485. <6>[ 1.740088] android_usb gadget: Mass Storage Function, version: 2009/09/11
  486. <6>[ 1.740149] android_usb gadget: Number of LUNs=1
  487. <6>[ 1.740271] clun0: LUN: removable read only CD-ROM file: (no medium)
  488. <6>[ 1.759591] msm_otg msm_otg: phy_reset: success
  489. <6>[ 1.797375] lge_pm_get_cable_info: acc_read_value - 1797445
  490. <6>[ 1.797436]
  491. <6>[ 1.797436]
  492. <6>[ 1.797436] [PM]Cable detected: 1797445(OPEN)(1100, 500)
  493. <6>[ 1.797436]
  494. <6>[ 1.797772] android_usb gadget: android_usb ready
  495. <6>[ 1.797955] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4
  496. <5>[ 1.798168] Registering SWP/SWPB emulation handler
  497. <6>[ 1.805066] clock_late_init() disabled 148 unused clocks
  498. <6>[ 1.811017] MSM Watchdog Initialized
  499. <6>[ 1.816084] input: suspend_autotest_pwrkey as /devices/virtual/input/input5
  500. <4>[ 1.817945] dhd_module_init: Enter
  501. <4>[ 1.818190] ## wifi_probe
  502. <4>[ 1.818281] wifi_set_power = 1
  503. <3>[ 1.968686] bcm_wifi_set_power: wifi power successed to pull up
  504. <4>[ 2.147627] mmc1: host does not support reading read-only switch. assuming write-enable.
  505. <6>[ 2.150282] mmc1: new high speed SD card at address 0007
  506. <6>[ 2.150343] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc1, type:SD
  507. <6>[ 2.150770] mmcblk1: mmc1:0007 SU02G 1.84 GiB
  508. <6>[ 2.158614] mmcblk1: p1
  509. <6>[ 2.158950] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
  510. <6>[ 2.159133] [LGE][MMC][mmc_rescan ( ) START!]
  511. <4>[ 2.169632] wifi_set_carddetect = 1
  512. <6>[ 2.169693] [LGE][MMC][msmsdcc_check_status( )] slot_status:1, host->oldstat:0, host->eject:1
  513. <6>[ 2.169815] mmc2: Slot status change detected (0 -> 1)
  514. <6>[ 2.169906] [LGE][mmc][mmc_detect_change ( )] result_delayed_work:1, delay:0
  515. <6>[ 2.240775] mmc2: new high speed SDIO card at address 0001
  516. <6>[ 2.240866] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc2, type:SDIO
  517. <6>[ 2.241080] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
  518. <6>[ 2.241416] [LGE][MMC][mmc_rescan ( ) START!]
  519. <4>[ 2.242301] dhdsdio_probe : no mutex held. set lock
  520. <4>[ 2.242606] F1 signature read @0x18000000=0x16234334
  521. <4>[ 2.250175] DHD: dongle ram size is set to 524288(orig 524288)
  522. <4>[ 2.251823] wl_create_event_handler thr:78 created
  523. <4>[ 2.251976] wl_create_event_handler thr:78 started
  524. <4>[ 2.252189] dhd_attach thr:79 created
  525. <4>[ 2.252281] dhd_attach thr:79 started
  526. <4>[ 2.252372] dhd_attach thr:7a created
  527. <4>[ 2.252433] dhd_attach thr:7a started
  528. <4>[ 2.252525] dhd_attach thr:7b created
  529. <4>[ 2.252647] dhd_attach thr:7b started
  530. <4>[ 2.252922] wifi_get_mac_addr
  531. <4>[ 2.253013] [bcm_wifi_get_mac_addr] Entering...in Board-l1-mmc.c
  532. <4>[ 2.253135] [bcm_wifi_get_mac_addr] Exiting. MyMac : 0 : 90 : 4c : cd : 13 : 89
  533. <4>[ 2.253685] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:cd:13:89
  534. <4>[ 2.253746] dhdsdio_probe : the lock is released.
  535. <4>[ 2.253929] wifi_set_power = 0
  536. <3>[ 2.264031] bcm_wifi_set_power: wifi power successed to pull down
  537. <4>[ 2.264153] =========== WLAN placed in RESET ========
  538. <B>[ 2.264275] 1970-01-01 23:02:00.500030
  539. <6>[ 2.264367] set_battery_data: [BMS] Battery profile data is set to LGC_BL53QH_2000
  540. <3>[ 2.265222] read_ocv_trim: program rev reg is 0x50
  541. <3>[ 2.265313] read_ocv_trim: trim reg is 0x41
  542. <3>[ 2.265374] read_ocv_trim: trim delta is 8
  543. <3>[ 2.265527] pm8921_is_usb_chg_plugged_in: called before init
  544. <3>[ 2.267846] pm8921_is_usb_chg_plugged_in: called before init
  545. <6>[ 2.271265] [BMS_SOC_INFO] soc=-22% vbatt=4132V temp=30 ibat=436mA
  546. <3>[ 2.271326] pm8921_charger_force_update_batt_psy: called before init
  547. <3>[ 2.272638] pm8921_is_usb_chg_plugged_in: called before init
  548. <0>[ 2.272791] calculate_unusable_charge_uah: Using shutdown_iavg_ua = 600 in all samples
  549. <3>[ 2.272943] pm8921_is_batfet_closed: called before init
  550. <3>[ 2.299771] pm8921_is_usb_chg_plugged_in: called before init
  551. <6>[ 2.302243] pm8921_bms_probe: OK battery_capacity_at_boot=88 volt = 4133508 ocv = 4209000
  552. <4>[ 2.303311] pm8921_chg_hw_init0
  553. <3>[ 2.303433] power_supply usb: driver failed to report `present' property
  554. <3>[ 2.303616] power_supply usb: driver failed to report `present' property
  555. <3>[ 2.303738] power_supply ac: driver failed to report `present' property
  556. <3>[ 2.303921] power_supply ac: driver failed to report `present' property
  557. <6>[ 2.309018] msm_otg_notify_power_supply: power_supply_get_by_name(usb)
  558. <4>[ 2.309507] dongju99.kim __pm8921_charger_vbus_draw i0
  559. <6>[ 2.309568] [WIRELESS] FAST IRQ START
  560. <6>[ 2.309690] fastchg_irq_handler: fastchg_irq : high_transition = 0
  561. <6>[ 2.309812] [WIRELESS] FAST IRQ END
  562. <3>[ 2.311002] Unable to register core for 0
  563. <3>[ 2.311307] Unable to register core for 1
  564. <6>[ 2.312070] HSD.fsa8008[lge_hsd_init : 967]lge_hsd_init
  565. <6>[ 2.312437] HSD.fsa8008[lge_hsd_probe : 697]lge_hsd_probe
  566. <6>[ 2.312681] HSD.fsa8008[lge_hsd_probe : 790]hi->irq_detect = 571
  567. <6>[ 2.313077] HSD.fsa8008[lge_hsd_probe : 815]hi->irq_key = 576
  568. <6>[ 2.313474] input: hs_detect as /devices/virtual/input/input6
  569. <4>[ 2.314054] Warning: unable to open an initial console.
  570. <4>[ 2.314115] [BOOT_CAUSE] 1
  571. <4>[ 2.314268] [SMPL_CNT] ===> write() : fd is 0
  572. <4>[ 2.314359] [SMPL_CNT] ===> not smpl boot!!!!!
  573. <6>[ 2.315031] Freeing init memory: 992K
  574. <3>[ 2.316862] init: /init.rc: 506: ignored duplicate definition of service 'drm'
  575. <3>[ 2.318602] init: /init.grand.rc: 595: invalid command '/system/bin/log'
  576. <3>[ 2.319151] init: could not import file init.ckerror.rc
  577. <4>[ 2.320769] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  578. <4>[ 2.568472] Level at Driver 112
  579. <4>[ 2.568808] lm3530_set_main_current_level() :level is : 112, cal_value is : 0x70
  580. <3>[ 2.584709] init: [get_was_hidden_reset] set ro.lge.hiddenreset 0 default!!! washiddenreset[] --->
  581. <3>[ 2.584922] FOTA: ===============================================
  582. <3>[ 2.584983] FOTA: EntryFOTA_Check
  583. <3>[ 2.585106] FOTA: OemFlash_Initialize in
  584. <3>[ 2.585228] FOTA: OemFlash_GetPartitionTable in
  585. <3>[ 2.585350] FOTA: OemFlash_GetPhygicalAddress : uiLogical - 00000000
  586. <3>[ 2.591576] FOTA: OemFlash_ReadData : Address - 0, uiRet - 4400
  587. <3>[ 2.591698] FOTA: --------------------------------------------------------
  588. <3>[ 2.591790] FOTA: OemFlash_GetPartitionTable : 2,modem,800000,12c00000,4000000
  589. <3>[ 2.591912] FOTA: --------------------------------------------------------
  590. <3>[ 2.591973] FOTA: --------------------------------------------------------
  591. <3>[ 2.592125] FOTA: OemFlash_GetPartitionTable : 3,sbl1,4800000,19000000,80000
  592. <3>[ 2.592247] FOTA: --------------------------------------------------------
  593. <3>[ 2.592339] FOTA: --------------------------------------------------------
  594. <3>[ 2.592461] FOTA: OemFlash_GetPartitionTable : 4,sbl2,4880000,1f400000,80000
  595. <3>[ 2.592583] FOTA: --------------------------------------------------------
  596. <3>[ 2.592644] FOTA: --------------------------------------------------------
  597. <3>[ 2.592797] FOTA: OemFlash_GetPartitionTable : 5,sbl3,4900000,25800000,100000
  598. <3>[ 2.592858] FOTA: --------------------------------------------------------
  599. <3>[ 2.592980] FOTA: --------------------------------------------------------
  600. <3>[ 2.593132] FOTA: OemFlash_GetPartitionTable : 8,aboot,4a00000,38400000,80000
  601. <3>[ 2.593193] FOTA: --------------------------------------------------------
  602. <3>[ 2.593316] FOTA: --------------------------------------------------------
  603. <3>[ 2.593407] FOTA: OemFlash_GetPartitionTable : 1,rpm,4a80000,c800000,80000
  604. <3>[ 2.593529] FOTA: --------------------------------------------------------
  605. <3>[ 2.593682] FOTA: --------------------------------------------------------
  606. <3>[ 2.593743] FOTA: OemFlash_GetPartitionTable : 9,boot,5000000,3e800000,c00000
  607. <3>[ 2.593865] FOTA: --------------------------------------------------------
  608. <3>[ 2.593987] FOTA: --------------------------------------------------------
  609. <3>[ 2.594079] FOTA: OemFlash_GetPartitionTable : 0,tz,6000000,6400000,80000
  610. <3>[ 2.594201] FOTA: --------------------------------------------------------
  611. <3>[ 2.594292] FOTA: --------------------------------------------------------
  612. <3>[ 2.594445] FOTA: OemFlash_GetPartitionTable : 10,recovery,18e800000,44c00000,1000000
  613. <3>[ 2.594567] FOTA: --------------------------------------------------------
  614. <3>[ 2.594658] FOTA: --------------------------------------------------------
  615. <3>[ 2.594781] FOTA: OemFlash_GetPartitionTable : 16,fota,190800000,6a400000,2000000
  616. <3>[ 2.594903] FOTA: --------------------------------------------------------
  617. <3>[ 2.594994] FOTA: --------------------------------------------------------
  618. <3>[ 2.595116] FOTA: OemFlash_GetPartitionTable : 17,tzbak,194800000,70800000,80000
  619. <3>[ 2.595208] FOTA: --------------------------------------------------------
  620. <3>[ 2.595330] FOTA: --------------------------------------------------------
  621. <3>[ 2.595452] FOTA: OemFlash_GetPartitionTable : 18,rpmbak,194880000,76c00000,80000
  622. <3>[ 2.595544] FOTA: --------------------------------------------------------
  623. <3>[ 2.595940] FOTA: OemFlash_GetPartitionTable Complete
  624. <3>[ 2.596001] FOTA: OemUSD_Init : 6a480000, 6a4e0000
  625. <3>[ 2.596154] FOTA: OemFlash_GetPhygicalAddress : uiLogical - 6a480000
  626. <3>[ 2.596673] FOTA: OemFlash_ReadData : Address - 190880000, uiRet - 200
  627. <3>[ 2.596825] FOTA: OemFlash_GetPhygicalAddress : uiLogical - 6a4c0000
  628. <3>[ 2.597192] FOTA: OemFlash_ReadData : Address - 1908c0000, uiRet - 200
  629. <3>[ 2.597283] FOTA: OemFlash_Release
  630. <3>[ 2.597436] FOTA: ===============================================
  631. <6>[ 2.934930] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
  632. <6>[ 2.950068] msm_otg msm_otg: check primary charger detection
  633. <6>[ 2.998718] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,data=ordered,errors=continue
  634. <6>[ 3.004394] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1
  635. <6>[ 3.009980] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: barrier=1
  636. <6>[ 3.018495] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  637. <6>[ 3.024568] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  638. <6>[ 3.030642] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  639. <6>[ 3.036777] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  640. <6>[ 3.037509] lge_pm_get_cable_info: acc_read_value - 1797147
  641. <6>[ 3.037631]
  642. <6>[ 3.037631]
  643. <6>[ 3.037631] [PM]Cable detected: 1797147(OPEN)(1100, 500)
  644. <6>[ 3.037662]
  645. <6>[ 3.038089] msm_otg msm_otg: Avail curr from USB = 500
  646. <6>[ 3.038150] msm_otg_notify_power_supply: power_supply_get_by_name(usb)
  647. <4>[ 3.038333] dongju99.kim __pm8921_charger_vbus_draw i2
  648. <6>[ 3.038394] [Touch] trigger_baseline_state_machine = 1
  649. <6>[ 3.042301] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  650. <6>[ 3.044010] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: barrier=1
  651. <4>[ 3.076484] [qcoin_power_set] Motor Level is 128
  652. <3>[ 4.039707] [Touch E] [synaptics_ts_get_data 246] Interrupt_status_reg is 0. Something is wrong in IC
  653. <4>[ 4.040470] [TOUCH] Baseline Reset
  654. <6>[ 4.040531] [Touch] need_to_rebase
  655. <4>[ 4.076636] [qcoin_power_set] Motor Level is 0
  656. <4>[ 4.076789] [qcoin_power_set] Motor Level is 0
  657. <6>[ 4.143384] vbatdet_low_irq_handler: batt fell below resume voltage charger enabled
  658. <6>[ 4.143537] [WIRELESS] FAST IRQ START
  659. <6>[ 4.143598] fastchg_irq_handler: fastchg_irq : high_transition = 1
  660. <6>[ 4.143689] fastchg_irq_handler: fastchg_irq : eoc_work start
  661. <6>[ 4.143903] [WIRELESS] FAST IRQ END
  662. <3>[ 4.989348] init: /init.grand.rc: 320: ignored duplicate definition of service 'bluetoothd'
  663. <3>[ 4.989745] init: /init.grand.rc: 561: invalid command '/system/bin/log'
  664. <3>[ 5.227620] init: [get_was_hidden_reset] set ro.lge.hiddenreset 0 default!!! washiddenreset[] --->
  665. <3>[ 5.227804] FOTA: ===============================================
  666. <3>[ 5.227926] FOTA: EntryFOTA_Check
  667. <3>[ 5.228017] FOTA: OemFlash_Initialize in
  668. <3>[ 5.228109] FOTA: OemFlash_GetPartitionTable in
  669. <3>[ 5.228261] FOTA: OemFlash_GetPhygicalAddress : uiLogical - 00000000
  670. <3>[ 5.232992] FOTA: OemFlash_ReadData : Address - 0, uiRet - 4400
  671. <3>[ 5.233145] FOTA: --------------------------------------------------------
  672. <3>[ 5.233206] FOTA: OemFlash_GetPartitionTable : 2,modem,800000,12c00000,4000000
  673. <3>[ 5.233328] FOTA: --------------------------------------------------------
  674. <3>[ 5.233480] FOTA: --------------------------------------------------------
  675. <3>[ 5.233541] FOTA: OemFlash_GetPartitionTable : 3,sbl1,4800000,19000000,80000
  676. <3>[ 5.233663] FOTA: --------------------------------------------------------
  677. <3>[ 5.233755] FOTA: --------------------------------------------------------
  678. <3>[ 5.233877] FOTA: OemFlash_GetPartitionTable : 4,sbl2,4880000,1f400000,80000
  679. <3>[ 5.233999] FOTA: --------------------------------------------------------
  680. <3>[ 5.234091] FOTA: --------------------------------------------------------
  681. <3>[ 5.234213] FOTA: OemFlash_GetPartitionTable : 5,sbl3,4900000,25800000,100000
  682. <3>[ 5.234274] FOTA: --------------------------------------------------------
  683. <3>[ 5.234426] FOTA: --------------------------------------------------------
  684. <3>[ 5.234549] FOTA: OemFlash_GetPartitionTable : 8,aboot,4a00000,38400000,80000
  685. <3>[ 5.234610] FOTA: --------------------------------------------------------
  686. <3>[ 5.234762] FOTA: --------------------------------------------------------
  687. <3>[ 5.234884] FOTA: OemFlash_GetPartitionTable : 1,rpm,4a80000,c800000,80000
  688. <3>[ 5.234945] FOTA: --------------------------------------------------------
  689. <3>[ 5.235098] FOTA: --------------------------------------------------------
  690. <3>[ 5.235159] FOTA: OemFlash_GetPartitionTable : 9,boot,5000000,3e800000,c00000
  691. <3>[ 5.235312] FOTA: --------------------------------------------------------
  692. <3>[ 5.235434] FOTA: --------------------------------------------------------
  693. <3>[ 5.235495] FOTA: OemFlash_GetPartitionTable : 0,tz,6000000,6400000,80000
  694. <3>[ 5.235647] FOTA: --------------------------------------------------------
  695. <3>[ 5.235739] FOTA: --------------------------------------------------------
  696. <3>[ 5.235861] FOTA: OemFlash_GetPartitionTable : 10,recovery,18e800000,44c00000,1000000
  697. <3>[ 5.236014] FOTA: --------------------------------------------------------
  698. <3>[ 5.236075] FOTA: --------------------------------------------------------
  699. <3>[ 5.236227] FOTA: OemFlash_GetPartitionTable : 16,fota,190800000,6a400000,2000000
  700. <3>[ 5.236349] FOTA: --------------------------------------------------------
  701. <3>[ 5.236410] FOTA: --------------------------------------------------------
  702. <3>[ 5.236563] FOTA: OemFlash_GetPartitionTable : 17,tzbak,194800000,70800000,80000
  703. <3>[ 5.236624] FOTA: --------------------------------------------------------
  704. <3>[ 5.236746] FOTA: --------------------------------------------------------
  705. <3>[ 5.236899] FOTA: OemFlash_GetPartitionTable : 18,rpmbak,194880000,76c00000,80000
  706. <3>[ 5.236960] FOTA: --------------------------------------------------------
  707. <3>[ 5.237356] FOTA: OemFlash_GetPartitionTable Complete
  708. <3>[ 5.237417] FOTA: OemUSD_Init : 6a480000, 6a4e0000
  709. <3>[ 5.237570] FOTA: OemFlash_GetPhygicalAddress : uiLogical - 6a480000
  710. <3>[ 5.238058] FOTA: OemFlash_ReadData : Address - 190880000, uiRet - 200
  711. <3>[ 5.238211] FOTA: OemFlash_GetPhygicalAddress : uiLogical - 6a4c0000
  712. <3>[ 5.238608] FOTA: OemFlash_ReadData : Address - 1908c0000, uiRet - 200
  713. <3>[ 5.238699] FOTA: OemFlash_Release
  714. <3>[ 5.238760] FOTA: ===============================================
  715. <3>[ 5.371738] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  716. <3>[ 5.372897] init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
  717. <3>[ 5.373660] init: cannot find '/system/bin/lg_dm_router', disabling 'lg_dm_router'
  718. <3>[ 5.373844] init: cannot find '/system/bin/mtsd', disabling 'mtsd'
  719. <3>[ 5.373996] init: cannot find '/system/bin/mtsd_logcat_main', disabling 'mtsd_main'
  720. <3>[ 5.374088] init: cannot find '/system/bin/mtsd_logcat_events', disabling 'mtsd_events'
  721. <3>[ 5.374271] init: cannot find '/system/bin/mtsd_logcat_radio', disabling 'mtsd_radio'
  722. <3>[ 5.374423] init: cannot find '/system/bin/mtsd_logcat_system', disabling 'mtsd_system'
  723. <3>[ 5.374515] init: cannot find '/system/bin/mtsd_file_manager', disabling 'mtsd_fmgr'
  724. <3>[ 5.374668] init: cannot find '/system/bin/mtsd_logcat_filter', disabling 'mtsd_hist'
  725. <3>[ 5.406806] bluetooth_set_power set blocked=1
  726. <3>[ 5.412025] init: service 'console' requires console
  727. <6>[ 5.413306] android_usb android0: gadget enable(0)
  728. <3>[ 5.413367] enable_store: android_usb: already disabled
  729. <6>[ 5.413917] android_usb android0: request function list: acm,diag,mtp,adb
  730. <6>[ 5.414100] android_usb android0: gadget enable(1)
  731. <6>[ 5.415351] mtp_bind_config
  732. <6>[ 5.415534] adb_bind_config
  733. <6>[ 5.416084] android_usb android0: gadget enable(0)
  734. <6>[ 5.418251] android_usb android0: gadget enable(1)
  735. <6>[ 5.418403] mtp_bind_config
  736. <6>[ 5.418495] adb_bind_config
  737. <3>[ 5.459484] init: service 'console' requires console
  738. <3>[ 5.484846] init: service 'console' requires console
  739. <6>[ 5.542224] android_work: android_work: did not send uevent (0 0 (null))
  740. <6>[ 5.604730] adb_open
  741. <6>[ 5.658232] android_work: android_work: did not send uevent (0 0 (null))
  742. <6>[ 5.700564] pil pil6: brought dsps out of reset
  743. <6>[ 5.785441] android_work: android_work: sent uevent USB_STATE=CONNECTED
  744. <6>[ 5.786784] android_usb gadget: high speed config #1: android_usb
  745. <7>[ 5.786967] $MTSUSB1
  746. <7>[ 5.787028] diag: USB connected
  747. <6>[ 5.829696] warning: `rild' uses 32-bit capabilities (legacy support in use)
  748. <6>[ 5.841355] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  749. <3>[ 5.899038] init: untracked pid 152 exited
  750. <6>[ 5.926049] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  751. <6>[ 5.947291] msm_thermal: enabled = 0
  752. <6>[ 6.534411] pil pil0: brought q6 out of reset
  753. <6>[ 6.551197] apr_tal:Q6 Is Up
  754. <3>[ 6.568655] diag: proc 2, msg mask update fail -12, tried 419
  755. <3>[ 6.772409] msm_ipc_router_create: Do not have permissions
  756. <4>[ 6.805005] gen_pool_add Alloc size 0x70000000
  757. <4>[ 6.823470] IOMMU type KGSL
  758. <4>[ 6.823561] gen_pool_add Alloc size 0x70000000
  759. <6>[ 6.838303] apr_tal: SMD_EVENT_OPEN
  760. <4>[ 7.095620] gen_pool_add Alloc size 0x70000000
  761. <6>[ 7.108194] pil pil1: brought modem_fw out of reset
  762. <4>[ 7.129070] Level at Driver 112
  763. <4>[ 7.129436] lm3530_set_main_current_level() :level is : 112, cal_value is : 0x70
  764. <4>[ 7.164779] msmsdcc_setup_pwr: sd io pull up is high voltage so change the voltage to High Level
  765. <6>[ 8.051182] msm_ta_detect_work: ta detection work
  766. <6>[ 10.641873] pil pil2: brought modem out of reset
  767. <3>[ 11.282649] Notify: smsm init
  768. <6>[ 11.392766] max17043 check temp = 30, PreviousRcomp =0x47
  769. <6>[ 11.392858] RCOMP: new rcomp is 0x45(0x47)
  770. <6>[ 11.393529] [Battery] max17043_work : soc(95), volt(4162)
  771. <4>[ 11.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  772. <6>[ 12.054692] [BMS_SOC_INFO] soc=88% vbatt=4169V temp=30 ibat=156mA
  773. <6>[ 12.999908] apr_tal:Modem Is Up
  774. <6>[ 13.061193] msm_ta_detect_work: ta detection first retry
  775. <6>[ 14.051243] Exiting as rconn_mohm is 0
  776. <6>[ 14.614191] smd_tty_ds_probe: probing of smd tty for DS modem is done
  777. <6>[ 14.807263] sps:BAM 0x124c2000 is registered.
  778. <6>[ 14.807416] sps:REVISION of BAM 0xe1d98000 is 0x5.
  779. <3>[ 14.839829] handle_bam_mux_cmd: dropping invalid LCID 10 reserved 1 cmd 1 pad 0 ch 10 len 0
  780. <3>[ 14.843064] handle_bam_mux_cmd: dropping invalid LCID 11 reserved 1 cmd 1 pad 0 ch 11 len 0
  781. <6>[ 21.412543] max17043 check temp = 30, PreviousRcomp =0x45
  782. <6>[ 21.412940] [Battery] max17043_work : soc(95), volt(4190)
  783. <4>[ 21.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  784. <6>[ 22.054723] [BMS_SOC_INFO] soc=88% vbatt=4175V temp=30 ibat=33mA
  785. <6>[ 23.039157] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  786. <6>[ 23.039218] | VIN_MIN=4300mV , DC_IN=5mV
  787. <6>[ 23.039340] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  788. <6>[ 23.039432] | Maxim_Volt=4190mV , BMS_Volt=4175mV
  789. <6>[ 23.039493] | Maxim_SOC=95 , BMS_SOC=0
  790. <6>[ 23.039615] | IBAT_MAX=925mA , IBAT=31mA , ITERM=200mA
  791. <6>[ 23.039676] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  792. <6>[ 23.039798] | Low_IRQ=1 , FAST_IRQ=1
  793. <6>[ 23.039890] | BAT_TEMP=30 , XO_Therm=35(41) , XO_Mitigation=0
  794. <6>[ 23.040012] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  795. <6>[ 23.071204] msm_ta_detect_work: ta detection second retry
  796. <6>[ 23.071356] msm_ta_detect_work: ta detection done
  797. <6>[ 24.051274] Exiting as rconn_mohm is 0
  798. <6>[ 27.070074] request_suspend_state: wakeup (3->0) at 27068931488 (2013-05-11 16:05:04.188383115 UTC)
  799. <3>[ 27.072821] init: untracked pid 287 exited
  800. <3>[ 27.073340] init: untracked pid 281 exited
  801. <6>[ 27.512925] apr_tal: SMD_EVENT_OPEN
  802. <6>[ 29.718235] request_suspend_state: wakeup (0->0) at 29717092636 (2013-05-11 16:05:06.836544263 UTC)
  803. <3>[ 29.720097] init: untracked pid 759 exited
  804. <3>[ 29.720677] init: untracked pid 758 exited
  805. <6>[ 30.104990] apr_tal: SMD_EVENT_OPEN
  806. <4>[ 31.811323] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  807. <6>[ 31.812574] max17043 check temp = 30, PreviousRcomp =0x45
  808. <6>[ 31.812940] [Battery] max17043_work : soc(95), volt(4201)
  809. <6>[ 32.054631] [BMS_SOC_INFO] soc=87% vbatt=4200V temp=30 ibat=13mA
  810. <6>[ 34.051243] Exiting as rconn_mohm is 0
  811. <6>[ 35.373569] request_suspend_state: wakeup (0->0) at 35372426068 (2013-05-11 16:05:12.491877695 UTC)
  812. <3>[ 35.376560] init: untracked pid 913 exited
  813. <3>[ 35.377537] init: untracked pid 914 exited
  814. <6>[ 35.767037] apr_tal: SMD_EVENT_OPEN
  815. <6>[ 39.750556] request_suspend_state: wakeup (0->0) at 39749413707 (2013-05-11 16:05:16.868865334 UTC)
  816. <3>[ 39.752846] init: untracked pid 1077 exited
  817. <3>[ 39.753090] init: untracked pid 1076 exited
  818. <6>[ 40.130627] apr_tal: SMD_EVENT_OPEN
  819. <4>[ 41.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  820. <6>[ 41.962612] max17043 check temp = 31, PreviousRcomp =0x45
  821. <6>[ 41.963009] [Battery] max17043_work : soc(95), volt(4202)
  822. <6>[ 42.054692] [BMS_SOC_INFO] soc=87% vbatt=4198V temp=31 ibat=8mA
  823. <6>[ 43.035891] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  824. <6>[ 43.036014] | VIN_MIN=4300mV , DC_IN=6mV
  825. <6>[ 43.036075] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  826. <6>[ 43.036166] | Maxim_Volt=4202mV , BMS_Volt=4171mV
  827. <6>[ 43.036288] | Maxim_SOC=95 , BMS_SOC=0
  828. <6>[ 43.036349] | IBAT_MAX=925mA , IBAT=0mA , ITERM=200mA
  829. <6>[ 43.036471] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  830. <6>[ 43.036532] | Low_IRQ=1 , FAST_IRQ=1
  831. <6>[ 43.036654] | BAT_TEMP=31 , XO_Therm=35(41) , XO_Mitigation=0
  832. <6>[ 43.036746] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  833. <6>[ 44.051243] Exiting as rconn_mohm is 0
  834. <6>[ 45.165603] request_suspend_state: wakeup (0->0) at 45164460251 (2013-05-11 16:05:22.283881357 UTC)
  835. <3>[ 45.167404] init: untracked pid 1235 exited
  836. <3>[ 45.168014] init: untracked pid 1234 exited
  837. <6>[ 45.565511] apr_tal: SMD_EVENT_OPEN
  838. <6>[ 50.398535] request_suspend_state: wakeup (0->0) at 50397391731 (2013-05-11 16:05:27.516843358 UTC)
  839. <3>[ 50.400854] init: untracked pid 1399 exited
  840. <3>[ 50.400946] init: untracked pid 1398 exited
  841. <6>[ 50.785136] apr_tal: SMD_EVENT_OPEN
  842. <4>[ 51.811231] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  843. <6>[ 52.032565] max17043 check temp = 31, PreviousRcomp =0x45
  844. <6>[ 52.032992] [Battery] max17043_work : soc(95), volt(4201)
  845. <6>[ 52.054600] [BMS_SOC_INFO] soc=88% vbatt=4201V temp=31 ibat=3mA
  846. <6>[ 54.051304] Exiting as rconn_mohm is 0
  847. <6>[ 55.498885] request_suspend_state: wakeup (0->0) at 55497712195 (2013-05-11 16:05:32.617163822 UTC)
  848. <3>[ 55.502060] init: untracked pid 1561 exited
  849. <3>[ 55.502182] init: untracked pid 1560 exited
  850. <6>[ 55.895925] apr_tal: SMD_EVENT_OPEN
  851. <6>[ 59.796612] request_suspend_state: wakeup (0->0) at 59795468946 (2013-05-11 16:05:36.914920573 UTC)
  852. <3>[ 59.798687] init: untracked pid 1721 exited
  853. <3>[ 59.798931] init: untracked pid 1720 exited
  854. <6>[ 60.423439] apr_tal: SMD_EVENT_OPEN
  855. <4>[ 61.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  856. <6>[ 62.052586] max17043 check temp = 31, PreviousRcomp =0x45
  857. <6>[ 62.053044] [Battery] max17043_work : soc(95), volt(4200)
  858. <6>[ 62.055882] [BMS_SOC_INFO] soc=88% vbatt=4198V temp=31 ibat=15mA
  859. <6>[ 63.035922] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  860. <6>[ 63.035983] | VIN_MIN=4300mV , DC_IN=6mV
  861. <6>[ 63.036136] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  862. <6>[ 63.036197] | Maxim_Volt=4200mV , BMS_Volt=4171mV
  863. <6>[ 63.036258] | Maxim_SOC=95 , BMS_SOC=0
  864. <6>[ 63.036380] | IBAT_MAX=925mA , IBAT=12mA , ITERM=200mA
  865. <6>[ 63.036441] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  866. <6>[ 63.036593] | Low_IRQ=1 , FAST_IRQ=1
  867. <6>[ 63.036654] | BAT_TEMP=31 , XO_Therm=35(41) , XO_Mitigation=0
  868. <6>[ 63.036777] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  869. <6>[ 63.195360] [PM] hot or cold :state=3, level=6 , TEMP=31 , VOLT=4200
  870. <6>[ 63.195482] [PM] BATT TEMP NORMAL : NORMAL ---> NORMAL , TEMP=31 , VOLT=4200
  871. <6>[ 64.051274] Exiting as rconn_mohm is 0
  872. <6>[ 65.204303] request_suspend_state: wakeup (0->0) at 65203160080 (2013-05-11 16:05:42.322611707 UTC)
  873. <3>[ 65.207446] init: untracked pid 1875 exited
  874. <3>[ 65.208393] init: untracked pid 1876 exited
  875. <6>[ 65.606561] apr_tal: SMD_EVENT_OPEN
  876. <6>[ 69.621822] request_suspend_state: wakeup (0->0) at 69620648254 (2013-05-11 16:05:46.740099881 UTC)
  877. <3>[ 69.624202] init: untracked pid 2039 exited
  878. <3>[ 69.624874] init: untracked pid 2040 exited
  879. <6>[ 70.011475] apr_tal: SMD_EVENT_OPEN
  880. <4>[ 71.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  881. <6>[ 72.054631] [BMS_SOC_INFO] soc=88% vbatt=4200V temp=31 ibat=-12mA
  882. <6>[ 72.752601] max17043 check temp = 31, PreviousRcomp =0x45
  883. <6>[ 72.752968] [Battery] max17043_work : soc(94), volt(4198)
  884. <6>[ 74.051274] Exiting as rconn_mohm is 0
  885. <6>[ 75.888783] request_suspend_state: wakeup (0->0) at 75887640469 (2013-05-11 16:05:53.007092096 UTC)
  886. <3>[ 75.890462] init: untracked pid 2198 exited
  887. <3>[ 75.891469] init: untracked pid 2197 exited
  888. <6>[ 76.286311] apr_tal: SMD_EVENT_OPEN
  889. <6>[ 80.242209] request_suspend_state: wakeup (0->0) at 80241066382 (2013-05-11 16:05:57.360518009 UTC)
  890. <3>[ 80.243918] init: untracked pid 2363 exited
  891. <3>[ 80.244468] init: untracked pid 2362 exited
  892. <6>[ 80.638303] apr_tal: SMD_EVENT_OPEN
  893. <4>[ 81.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  894. <6>[ 82.054631] [BMS_SOC_INFO] soc=88% vbatt=4198V temp=31 ibat=38mA
  895. <6>[ 83.035922] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  896. <6>[ 83.036014] | VIN_MIN=4300mV , DC_IN=6mV
  897. <6>[ 83.036075] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  898. <6>[ 83.036197] | Maxim_Volt=4198mV , BMS_Volt=4168mV
  899. <6>[ 83.036258] | Maxim_SOC=94 , BMS_SOC=0
  900. <6>[ 83.036319] | IBAT_MAX=925mA , IBAT=10mA , ITERM=200mA
  901. <6>[ 83.036441] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  902. <6>[ 83.036593] | Low_IRQ=1 , FAST_IRQ=1
  903. <6>[ 83.036654] | BAT_TEMP=31 , XO_Therm=36(41) , XO_Mitigation=0
  904. <6>[ 83.036715] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  905. <6>[ 83.052800] max17043 check temp = 31, PreviousRcomp =0x45
  906. <6>[ 83.053258] [Battery] max17043_work : soc(94), volt(4175)
  907. <6>[ 84.051243] Exiting as rconn_mohm is 0
  908. <6>[ 85.508560] request_suspend_state: wakeup (0->0) at 85507417669 (2013-05-11 16:06:02.626869296 UTC)
  909. <3>[ 85.510392] init: untracked pid 2526 exited
  910. <3>[ 85.511216] init: untracked pid 2525 exited
  911. <6>[ 85.895437] apr_tal: SMD_EVENT_OPEN
  912. <6>[ 89.830306] request_suspend_state: wakeup (0->0) at 89829163435 (2013-05-11 16:06:06.948615062 UTC)
  913. <3>[ 89.832137] init: untracked pid 2691 exited
  914. <3>[ 89.832626] init: untracked pid 2690 exited
  915. <6>[ 90.213184] apr_tal: SMD_EVENT_OPEN
  916. <4>[ 91.811292] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  917. <6>[ 92.054661] [BMS_SOC_INFO] soc=88% vbatt=4199V temp=31 ibat=-12mA
  918. <6>[ 93.072577] max17043 check temp = 31, PreviousRcomp =0x45
  919. <6>[ 93.073676] [Battery] max17043_work : soc(94), volt(4178)
  920. <6>[ 94.051304] Exiting as rconn_mohm is 0
  921. <6>[ 96.068579] request_suspend_state: wakeup (0->0) at 96067405462 (2013-05-11 16:06:13.186857089 UTC)
  922. <3>[ 96.071142] init: untracked pid 2845 exited
  923. <3>[ 96.071875] init: untracked pid 2846 exited
  924. <6>[ 96.468335] apr_tal: SMD_EVENT_OPEN
  925. <6>[ 99.353822] request_suspend_state: wakeup (0->0) at 99352648860 (2013-05-11 16:06:16.472100487 UTC)
  926. <3>[ 99.357607] init: untracked pid 3010 exited
  927. <3>[ 99.357759] init: untracked pid 3011 exited
  928. <6>[ 99.739020] apr_tal: SMD_EVENT_OPEN
  929. <4>[ 101.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  930. <6>[ 102.054631] [BMS_SOC_INFO] soc=88% vbatt=4181V temp=31 ibat=-13mA
  931. <6>[ 103.036044] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  932. <6>[ 103.036136] | VIN_MIN=4300mV , DC_IN=6mV
  933. <6>[ 103.036258] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  934. <6>[ 103.036319] | Maxim_Volt=4178mV , BMS_Volt=4175mV
  935. <6>[ 103.036441] | Maxim_SOC=94 , BMS_SOC=0
  936. <6>[ 103.036532] | IBAT_MAX=925mA , IBAT=-13mA , ITERM=200mA
  937. <6>[ 103.036593] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  938. <6>[ 103.036715] | Low_IRQ=1 , FAST_IRQ=1
  939. <6>[ 103.036777] | BAT_TEMP=31 , XO_Therm=36(41) , XO_Mitigation=0
  940. <6>[ 103.036899] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  941. <6>[ 103.432534] max17043 check temp = 31, PreviousRcomp =0x45
  942. <6>[ 103.432931] [Battery] max17043_work : soc(94), volt(4173)
  943. <6>[ 104.051274] Exiting as rconn_mohm is 0
  944. <6>[ 105.608606] request_suspend_state: wakeup (0->0) at 105607463447 (2013-05-11 16:06:22.726915074 UTC)
  945. <3>[ 105.611231] init: untracked pid 3165 exited
  946. <3>[ 105.611933] init: untracked pid 3166 exited
  947. <6>[ 106.012391] apr_tal: SMD_EVENT_OPEN
  948. <6>[ 109.930321] request_suspend_state: wakeup (0->0) at 109929148173 (2013-05-11 16:06:27.048599800 UTC)
  949. <3>[ 109.932153] init: untracked pid 3331 exited
  950. <3>[ 109.932733] init: untracked pid 3330 exited
  951. <6>[ 110.346375] apr_tal: SMD_EVENT_OPEN
  952. <4>[ 111.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  953. <6>[ 112.054753] [BMS_SOC_INFO] soc=88% vbatt=4177V temp=31 ibat=-12mA
  954. <6>[ 113.452495] max17043 check temp = 31, PreviousRcomp =0x45
  955. <6>[ 113.452891] [Battery] max17043_work : soc(94), volt(4160)
  956. <6>[ 114.051304] Exiting as rconn_mohm is 0
  957. <6>[ 115.148542] request_suspend_state: wakeup (0->0) at 115147399354 (2013-05-11 16:06:32.266850981 UTC)
  958. <3>[ 115.152113] init: untracked pid 3485 exited
  959. <3>[ 115.153059] init: untracked pid 3486 exited
  960. <6>[ 115.539447] apr_tal: SMD_EVENT_OPEN
  961. <6>[ 120.979490] request_suspend_state: wakeup (0->0) at 120978347010 (2013-05-11 16:06:38.097798637 UTC)
  962. <3>[ 120.982450] init: untracked pid 3652 exited
  963. <3>[ 120.983457] init: untracked pid 3653 exited
  964. <6>[ 121.363345] apr_tal: SMD_EVENT_OPEN
  965. <4>[ 121.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  966. <6>[ 122.054631] [BMS_SOC_INFO] soc=88% vbatt=4199V temp=31 ibat=38mA
  967. <6>[ 123.032351] [PM] hot or cold :state=3, level=6 , TEMP=32 , VOLT=4160
  968. <6>[ 123.032412] [PM] BATT TEMP NORMAL : NORMAL ---> NORMAL , TEMP=32 , VOLT=4160
  969. <6>[ 123.038730] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  970. <6>[ 123.038760] | VIN_MIN=4300mV , DC_IN=6mV
  971. <6>[ 123.038760] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  972. <6>[ 123.038760] | Maxim_Volt=4160mV , BMS_Volt=4169mV
  973. <6>[ 123.038760] | Maxim_SOC=94 , BMS_SOC=0
  974. <6>[ 123.038760] | IBAT_MAX=925mA , IBAT=9mA , ITERM=200mA
  975. <6>[ 123.038760] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  976. <6>[ 123.038791] | Low_IRQ=1 , FAST_IRQ=1
  977. <6>[ 123.038791] | BAT_TEMP=32 , XO_Therm=36(41) , XO_Mitigation=0
  978. <6>[ 123.038791] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  979. <6>[ 123.472516] max17043 check temp = 32, PreviousRcomp =0x45
  980. <6>[ 123.472974] [Battery] max17043_work : soc(94), volt(4160)
  981. <6>[ 124.051274] Exiting as rconn_mohm is 0
  982. <6>[ 125.514207] request_suspend_state: wakeup (0->0) at 125513033414 (2013-05-11 16:06:42.632485041 UTC)
  983. <3>[ 125.517198] init: untracked pid 3812 exited
  984. <3>[ 125.518266] init: untracked pid 3813 exited
  985. <6>[ 125.914970] apr_tal: SMD_EVENT_OPEN
  986. <6>[ 129.922234] request_suspend_state: wakeup (0->0) at 129921060271 (2013-05-11 16:06:47.040511898 UTC)
  987. <3>[ 129.925072] init: untracked pid 3971 exited
  988. <3>[ 129.925957] init: untracked pid 3972 exited
  989. <6>[ 130.310819] apr_tal: SMD_EVENT_OPEN
  990. <4>[ 131.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  991. <6>[ 132.054936] [BMS_SOC_INFO] soc=88% vbatt=4176V temp=32 ibat=4mA
  992. <6>[ 133.684938] max17043 check temp = 32, PreviousRcomp =0x45
  993. <6>[ 133.685365] [Battery] max17043_work : soc(94), volt(4166)
  994. <6>[ 134.051274] Exiting as rconn_mohm is 0
  995. <6>[ 135.158919] request_suspend_state: wakeup (0->0) at 135157776277 (2013-05-11 16:06:52.277227904 UTC)
  996. <3>[ 135.161910] init: untracked pid 4128 exited
  997. <3>[ 135.162978] init: untracked pid 4129 exited
  998. <6>[ 135.556050] apr_tal: SMD_EVENT_OPEN
  999. <6>[ 139.459941] request_suspend_state: wakeup (0->0) at 139458768190 (2013-05-11 16:06:56.578219817 UTC)
  1000. <3>[ 139.462139] init: untracked pid 4293 exited
  1001. <3>[ 139.462810] init: untracked pid 4294 exited
  1002. <6>[ 139.844498] apr_tal: SMD_EVENT_OPEN
  1003. <4>[ 141.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1004. <6>[ 142.054631] [BMS_SOC_INFO] soc=88% vbatt=4198V temp=32 ibat=-11mA
  1005. <6>[ 143.036502] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  1006. <6>[ 143.036654] | VIN_MIN=4300mV , DC_IN=7mV
  1007. <6>[ 143.036715] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  1008. <6>[ 143.036838] | Maxim_Volt=4166mV , BMS_Volt=4175mV
  1009. <6>[ 143.036899] | Maxim_SOC=94 , BMS_SOC=0
  1010. <6>[ 143.036960] | IBAT_MAX=925mA , IBAT=15mA , ITERM=200mA
  1011. <6>[ 143.037112] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  1012. <6>[ 143.037173] | Low_IRQ=1 , FAST_IRQ=1
  1013. <6>[ 143.037295] | BAT_TEMP=32 , XO_Therm=36(41) , XO_Mitigation=0
  1014. <6>[ 143.037356] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  1015. <6>[ 143.712498] max17043 check temp = 32, PreviousRcomp =0x45
  1016. <6>[ 143.712894] [Battery] max17043_work : soc(94), volt(4167)
  1017. <6>[ 144.051243] Exiting as rconn_mohm is 0
  1018. <6>[ 144.850328] request_suspend_state: wakeup (0->0) at 144849184792 (2013-05-11 16:07:01.968636419 UTC)
  1019. <3>[ 144.852098] init: untracked pid 4449 exited
  1020. <3>[ 144.852952] init: untracked pid 4448 exited
  1021. <6>[ 145.231771] apr_tal: SMD_EVENT_OPEN
  1022. <6>[ 151.018770] request_suspend_state: wakeup (0->0) at 151017626726 (2013-05-11 16:07:08.137078353 UTC)
  1023. <3>[ 151.022066] init: untracked pid 4609 exited
  1024. <3>[ 151.022188] init: untracked pid 4608 exited
  1025. <6>[ 151.414893] apr_tal: SMD_EVENT_OPEN
  1026. <4>[ 151.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1027. <6>[ 152.054661] [BMS_SOC_INFO] soc=88% vbatt=4195V temp=32 ibat=15mA
  1028. <6>[ 153.732549] max17043 check temp = 32, PreviousRcomp =0x45
  1029. <6>[ 153.732946] [Battery] max17043_work : soc(94), volt(4162)
  1030. <6>[ 154.051274] Exiting as rconn_mohm is 0
  1031. <6>[ 154.806439] request_suspend_state: wakeup (0->0) at 154805296495 (2013-05-11 16:07:11.924748122 UTC)
  1032. <3>[ 154.808148] init: untracked pid 4775 exited
  1033. <3>[ 154.808667] init: untracked pid 4774 exited
  1034. <6>[ 155.194689] apr_tal: SMD_EVENT_OPEN
  1035. <6>[ 160.203082] request_suspend_state: wakeup (0->0) at 160201908734 (2013-05-11 16:07:17.321360361 UTC)
  1036. <3>[ 160.206226] init: untracked pid 4929 exited
  1037. <3>[ 160.207080] init: untracked pid 4930 exited
  1038. <6>[ 160.607813] apr_tal: SMD_EVENT_OPEN
  1039. <4>[ 161.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1040. <6>[ 162.054631] [BMS_SOC_INFO] soc=88% vbatt=4197V temp=32 ibat=10mA
  1041. <6>[ 163.035800] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  1042. <6>[ 163.035861] | VIN_MIN=4300mV , DC_IN=7mV
  1043. <6>[ 163.035983] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  1044. <6>[ 163.036044] | Maxim_Volt=4162mV , BMS_Volt=4174mV
  1045. <6>[ 163.036136] | Maxim_SOC=94 , BMS_SOC=0
  1046. <6>[ 163.036258] | IBAT_MAX=925mA , IBAT=10mA , ITERM=200mA
  1047. <6>[ 163.036319] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  1048. <6>[ 163.036441] | Low_IRQ=1 , FAST_IRQ=1
  1049. <6>[ 163.036502] | BAT_TEMP=32 , XO_Therm=36(41) , XO_Mitigation=0
  1050. <6>[ 163.036624] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  1051. <6>[ 163.752601] max17043 check temp = 32, PreviousRcomp =0x45
  1052. <6>[ 163.753029] [Battery] max17043_work : soc(94), volt(4155)
  1053. <6>[ 164.051274] Exiting as rconn_mohm is 0
  1054. <6>[ 165.438638] request_suspend_state: wakeup (0->0) at 165437464967 (2013-05-11 16:07:22.556916594 UTC)
  1055. <3>[ 165.440469] init: untracked pid 5094 exited
  1056. <3>[ 165.441233] init: untracked pid 5093 exited
  1057. <6>[ 165.828780] apr_tal: SMD_EVENT_OPEN
  1058. <6>[ 170.559011] request_suspend_state: wakeup (0->0) at 170557867835 (2013-05-11 16:07:27.677288941 UTC)
  1059. <3>[ 170.560720] init: untracked pid 5255 exited
  1060. <3>[ 170.561330] init: untracked pid 5254 exited
  1061. <6>[ 170.956233] apr_tal: SMD_EVENT_OPEN
  1062. <4>[ 171.811231] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1063. <6>[ 172.054631] [BMS_SOC_INFO] soc=88% vbatt=4195V temp=32 ibat=8mA
  1064. <6>[ 173.772562] max17043 check temp = 32, PreviousRcomp =0x45
  1065. <6>[ 173.772897] [Battery] max17043_work : soc(94), volt(4152)
  1066. <6>[ 174.051304] Exiting as rconn_mohm is 0
  1067. <6>[ 175.769174] request_suspend_state: wakeup (0->0) at 175768031119 (2013-05-11 16:07:32.887482746 UTC)
  1068. <3>[ 175.771982] init: untracked pid 5414 exited
  1069. <3>[ 175.773386] init: untracked pid 5415 exited
  1070. <6>[ 176.163497] apr_tal: SMD_EVENT_OPEN
  1071. <6>[ 180.070807] request_suspend_state: wakeup (0->0) at 180069663957 (2013-05-11 16:07:37.189115584 UTC)
  1072. <3>[ 180.073859] init: untracked pid 5574 exited
  1073. <3>[ 180.074866] init: untracked pid 5575 exited
  1074. <6>[ 180.478803] apr_tal: SMD_EVENT_OPEN
  1075. <4>[ 181.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1076. <6>[ 182.054631] [BMS_SOC_INFO] soc=88% vbatt=4197V temp=32 ibat=2mA
  1077. <6>[ 183.035952] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  1078. <6>[ 183.036014] | VIN_MIN=4300mV , DC_IN=9mV
  1079. <6>[ 183.036105] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  1080. <6>[ 183.036227] | Maxim_Volt=4152mV , BMS_Volt=4176mV
  1081. <6>[ 183.036288] | Maxim_SOC=94 , BMS_SOC=0
  1082. <6>[ 183.036349] | IBAT_MAX=925mA , IBAT=112mA , ITERM=200mA
  1083. <6>[ 183.036471] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  1084. <6>[ 183.036593] | Low_IRQ=1 , FAST_IRQ=1
  1085. <6>[ 183.036654] | BAT_TEMP=32 , XO_Therm=37(41) , XO_Mitigation=0
  1086. <6>[ 183.036746] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  1087. <6>[ 183.192278] [PM] hot or cold :state=3, level=6 , TEMP=32 , VOLT=4152
  1088. <6>[ 183.192430] [PM] BATT TEMP NORMAL : NORMAL ---> NORMAL , TEMP=32 , VOLT=4152
  1089. <6>[ 183.802533] max17043 check temp = 32, PreviousRcomp =0x45
  1090. <6>[ 183.802990] [Battery] max17043_work : soc(94), volt(4162)
  1091. <6>[ 184.051274] Exiting as rconn_mohm is 0
  1092. <6>[ 184.693270] request_suspend_state: wakeup (0->0) at 184692126952 (2013-05-11 16:07:41.811578579 UTC)
  1093. <3>[ 184.695772] init: untracked pid 5734 exited
  1094. <3>[ 184.696444] init: untracked pid 5735 exited
  1095. <6>[ 185.084541] apr_tal: SMD_EVENT_OPEN
  1096. <6>[ 190.094521] request_suspend_state: wakeup (0->0) at 190093347767 (2013-05-11 16:07:47.212799394 UTC)
  1097. <3>[ 190.097695] init: untracked pid 5889 exited
  1098. <3>[ 190.098794] init: untracked pid 5890 exited
  1099. <6>[ 190.495833] apr_tal: SMD_EVENT_OPEN
  1100. <4>[ 191.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1101. <6>[ 192.054692] [BMS_SOC_INFO] soc=88% vbatt=4196V temp=32 ibat=6mA
  1102. <6>[ 193.832534] max17043 check temp = 32, PreviousRcomp =0x45
  1103. <6>[ 193.832961] [Battery] max17043_work : soc(94), volt(4168)
  1104. <6>[ 194.051304] Exiting as rconn_mohm is 0
  1105. <6>[ 194.481336] request_suspend_state: wakeup (0->0) at 194480162964 (2013-05-11 16:07:51.599614591 UTC)
  1106. <3>[ 194.483656] init: untracked pid 6053 exited
  1107. <3>[ 194.484266] init: untracked pid 6054 exited
  1108. <6>[ 194.859941] apr_tal: SMD_EVENT_OPEN
  1109. <6>[ 200.648588] request_suspend_state: wakeup (0->0) at 200647445127 (2013-05-11 16:07:57.766866233 UTC)
  1110. <3>[ 200.653074] init: untracked pid 6209 exited
  1111. <3>[ 200.653258] init: untracked pid 6210 exited
  1112. <6>[ 201.034030] apr_tal: SMD_EVENT_OPEN
  1113. <4>[ 201.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1114. <6>[ 202.054631] [BMS_SOC_INFO] soc=88% vbatt=4196V temp=32 ibat=3mA
  1115. <6>[ 203.036502] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  1116. <6>[ 203.036624] | VIN_MIN=4300mV , DC_IN=7mV
  1117. <6>[ 203.036715] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  1118. <6>[ 203.036777] | Maxim_Volt=4168mV , BMS_Volt=4172mV
  1119. <6>[ 203.036899] | Maxim_SOC=94 , BMS_SOC=0
  1120. <6>[ 203.036960] | IBAT_MAX=925mA , IBAT=114mA , ITERM=200mA
  1121. <6>[ 203.036990] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  1122. <6>[ 203.036990] | Low_IRQ=1 , FAST_IRQ=1
  1123. <6>[ 203.036990] | BAT_TEMP=32 , XO_Therm=37(41) , XO_Mitigation=0
  1124. <6>[ 203.036990] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  1125. <6>[ 203.852556] max17043 check temp = 32, PreviousRcomp =0x45
  1126. <6>[ 203.852922] [Battery] max17043_work : soc(94), volt(4158)
  1127. <6>[ 204.051274] Exiting as rconn_mohm is 0
  1128. <6>[ 205.009949] request_suspend_state: wakeup (0->0) at 205008775812 (2013-05-11 16:08:02.128227439 UTC)
  1129. <3>[ 205.013062] init: untracked pid 6375 exited
  1130. <3>[ 205.014069] init: untracked pid 6376 exited
  1131. <6>[ 205.421699] apr_tal: SMD_EVENT_OPEN
  1132. <6>[ 210.358675] request_suspend_state: wakeup (0->0) at 210357532107 (2013-05-11 16:08:07.476983734 UTC)
  1133. <3>[ 210.360659] init: untracked pid 6534 exited
  1134. <3>[ 210.360872] init: untracked pid 6533 exited
  1135. <6>[ 210.740882] apr_tal: SMD_EVENT_OPEN
  1136. <4>[ 211.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1137. <6>[ 212.054478] [BMS_SOC_INFO] soc=88% vbatt=4179V temp=32 ibat=18mA
  1138. <6>[ 214.008728] max17043 check temp = 33, PreviousRcomp =0x45
  1139. <6>[ 214.009125] [Battery] max17043_work : soc(94), volt(4146)
  1140. <6>[ 214.051243] Exiting as rconn_mohm is 0
  1141. <6>[ 214.655241] request_suspend_state: wakeup (0->0) at 214654068043 (2013-05-11 16:08:11.773519670 UTC)
  1142. <3>[ 214.657530] init: untracked pid 6695 exited
  1143. <3>[ 214.658263] init: untracked pid 6696 exited
  1144. <6>[ 215.272028] apr_tal: SMD_EVENT_OPEN
  1145. <6>[ 220.928612] request_suspend_state: wakeup (0->0) at 220927469538 (2013-05-11 16:08:18.046890645 UTC)
  1146. <3>[ 220.931664] init: untracked pid 6851 exited
  1147. <3>[ 220.931909] init: untracked pid 6850 exited
  1148. <6>[ 221.312803] apr_tal: SMD_EVENT_OPEN
  1149. <4>[ 221.811231] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1150. <6>[ 222.054631] [BMS_SOC_INFO] soc=88% vbatt=4197V temp=32 ibat=241mA
  1151. <6>[ 223.035983] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  1152. <6>[ 223.036075] | VIN_MIN=4300mV , DC_IN=7mV
  1153. <6>[ 223.036197] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  1154. <6>[ 223.036258] | Maxim_Volt=4146mV , BMS_Volt=4151mV
  1155. <6>[ 223.036319] | Maxim_SOC=94 , BMS_SOC=0
  1156. <6>[ 223.036441] | IBAT_MAX=925mA , IBAT=-10mA , ITERM=200mA
  1157. <6>[ 223.036502] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  1158. <6>[ 223.036624] | Low_IRQ=1 , FAST_IRQ=1
  1159. <6>[ 223.036715] | BAT_TEMP=33 , XO_Therm=37(41) , XO_Mitigation=0
  1160. <6>[ 223.036838] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  1161. <6>[ 224.032534] max17043 check temp = 33, PreviousRcomp =0x45
  1162. <6>[ 224.032992] [Battery] max17043_work : soc(94), volt(4171)
  1163. <6>[ 224.051396] Exiting as rconn_mohm is 0
  1164. <6>[ 226.118602] request_suspend_state: wakeup (0->0) at 226117428336 (2013-05-11 16:08:23.236879963 UTC)
  1165. <3>[ 226.121532] init: untracked pid 7015 exited
  1166. <3>[ 226.123454] init: untracked pid 7016 exited
  1167. <6>[ 226.506027] apr_tal: SMD_EVENT_OPEN
  1168. <6>[ 229.422829] request_suspend_state: wakeup (0->0) at 229421685928 (2013-05-11 16:08:26.541137555 UTC)
  1169. <3>[ 229.424690] init: untracked pid 7178 exited
  1170. <3>[ 229.425087] init: untracked pid 7177 exited
  1171. <6>[ 229.809278] apr_tal: SMD_EVENT_OPEN
  1172. <4>[ 231.811200] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1173. <6>[ 232.054631] [BMS_SOC_INFO] soc=88% vbatt=4197V temp=33 ibat=-11mA
  1174. <6>[ 234.051365] Exiting as rconn_mohm is 0
  1175. <6>[ 234.052556] max17043 check temp = 33, PreviousRcomp =0x45
  1176. <6>[ 234.052922] [Battery] max17043_work : soc(94), volt(4172)
  1177. <6>[ 234.849076] request_suspend_state: wakeup (0->0) at 234847933446 (2013-05-11 16:08:31.967385073 UTC)
  1178. <3>[ 234.851976] init: untracked pid 7332 exited
  1179. <3>[ 234.852952] init: untracked pid 7333 exited
  1180. <6>[ 235.231100] apr_tal: SMD_EVENT_OPEN
  1181. <6>[ 240.467755] request_suspend_state: wakeup (0->0) at 240466581393 (2013-05-11 16:08:37.586033020 UTC)
  1182. <3>[ 240.473126] init: untracked pid 7492 exited
  1183. <3>[ 240.473187] init: untracked pid 7493 exited
  1184. <6>[ 240.876606] apr_tal: SMD_EVENT_OPEN
  1185. <4>[ 241.811231] >>>pet_watchdog_work [system rev: 10][raw ver: 7]
  1186. <6>[ 242.054631] [BMS_SOC_INFO] soc=88% vbatt=4193V temp=33 ibat=7mA
  1187. <6>[ 243.032382] [PM] hot or cold :state=3, level=6 , TEMP=33 , VOLT=4172
  1188. <6>[ 243.032534] [PM] BATT TEMP NORMAL : NORMAL ---> NORMAL , TEMP=33 , VOLT=4172
  1189. <6>[ 243.038425] | DC_IRQ=0(GPIO=0) , USB_IRQ=1
  1190. <6>[ 243.038486] | VIN_MIN=4300mV , DC_IN=7mV
  1191. <6>[ 243.038577] | VBAT_MAX=4350mV , VBAT_LOW=4240mV
  1192. <6>[ 243.038699] | Maxim_Volt=4172mV , BMS_Volt=4174mV
  1193. <6>[ 243.038760] | Maxim_SOC=94 , BMS_SOC=0
  1194. <6>[ 243.038821] | IBAT_MAX=925mA , IBAT=26mA , ITERM=200mA
  1195. <6>[ 243.038943] | FET_IRQ=1 , FET_FORCE=129 , FSM=7 , Dis_Bit=0 , Auto_Enable=1 , RegLoop=0
  1196. <6>[ 243.039066] | Low_IRQ=1 , FAST_IRQ=1
  1197. <6>[ 243.039157] | BAT_TEMP=33 , XO_Therm=37(41) , XO_Mitigation=0
  1198. <6>[ 243.039218] | chg_batt_temp_state=3 , last_stop_charging=0 , pseudo_ui_charging=0
  1199. <6>[ 244.051304] Exiting as rconn_mohm is 0
  1200. <6>[ 244.072577] max17043 check temp = 33, PreviousRcomp =0x45
  1201. <6>[ 244.073004] [Battery] max17043_work : soc(94), volt(4173)
  1202. <6>[ 244.906485] request_suspend_state: wakeup (0->0) at 244905342266 (2013-05-11 16:08:42.024793893 UTC)
  1203. <3>[ 244.908286] init: untracked pid 7657 exited
  1204. <3>[ 244.908866] init: untracked pid 7656 exited
  1205. <6>[ 245.297451] apr_tal: SMD_EVENT_OPEN
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement