Guest User

Untitled

a guest
Aug 26th, 2017
154
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. dosbox.bat
  2. RELENT.EXE
  3.  
  4. dosbox.cfg (local dosbox.conf)
  5.  
  6. # This is the configuration file for DOSBox 0.74. (Please use the latest version of DOSBox)
  7. # Lines starting with a # are comment lines and are ignored by DOSBox.
  8. # They are used to (briefly) document the effect of each option.
  9.  
  10. [sdl]
  11. # fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back)
  12. # vsync: Sync to Vblank IF supported by the output device and renderer (if relevant).
  13. # It can reduce screen flickering, but it can also result in a slow DOSBox.
  14. # fullresolution: What resolution to use for fullscreen: original, desktop or a fixed size (e.g. 1024x768).
  15. # Using your monitor's native resolution with aspect=true might give the best results.
  16. # If you end up with small window on a large screen, try an output different from surface.
  17. # windowresolution: Scale the window to this size IF the output device supports hardware scaling.
  18. # (output=surface does not!)
  19. # output: What video system to use for output.
  20. # Possible values: surface, texture, texturenb.
  21. # renderer: Choose a renderer driver if output=texture or output=texturenb. Use output=auto for an automatic choice.
  22. # Possible values: auto, opengl, software.
  23. # autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock)
  24. # sensitivity: Mouse sensitivity.
  25. # waitonerror: Wait before closing the console if dosbox has an error.
  26. # priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized.
  27. # pause is only valid for the second entry.
  28. # Possible values: lowest, lower, normal, higher, highest, pause.
  29. # mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the default value.
  30.  
  31. fullscreen=true
  32. vsync=false
  33. fullresolution=desktop
  34. windowresolution=original
  35. output=texture
  36. renderer=auto
  37. autolock=true
  38. sensitivity=100
  39. waitonerror=true
  40. priority=higher,normal
  41. mapperfile=lba1.map
  42.  
  43. [dosbox]
  44. # language: Select another language file.
  45. # machine: The type of machine DOSBox tries to emulate.
  46. # Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe.
  47. # captures: Directory where things like wave, midi, screenshot get captured.
  48. # memsize: Amount of memory DOSBox has in megabytes.
  49. # This value is best left at its default to avoid problems with some games,
  50. # though few games might require a higher value.
  51. # There is generally no speed advantage when raising this value.
  52.  
  53. language=
  54. machine=svga_s3
  55. captures=capture
  56. memsize=30
  57.  
  58. [render]
  59. # frameskip: How many frames DOSBox skips before drawing one.
  60. # aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!.
  61. # scaler: Scaler used to enlarge/enhance low resolution modes. If 'forced' is appended,
  62. # then the scaler will be used even if the result might not be desired.
  63. # Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x.
  64.  
  65. frameskip=0
  66. aspect=false
  67. scaler=normal2x
  68.  
  69. [cpu]
  70. # core: CPU Core used in emulation. auto will switch to dynamic if available and
  71. # appropriate.
  72. # Possible values: auto, dynamic, normal, simple.
  73. # cputype: CPU Type used in emulation. auto is the fastest choice.
  74. # Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.
  75. # cycles: Amount of instructions DOSBox tries to emulate each millisecond.
  76. # Setting this value too high results in sound dropouts and lags.
  77. # Cycles can be set in 3 ways:
  78. # 'auto' tries to guess what a game needs.
  79. # It usually works, but can fail for certain games.
  80. # 'fixed #number' will set a fixed amount of cycles. This is what you usually
  81. # need if 'auto' fails (Example: fixed 4000).
  82. # 'max' will allocate as much cycles as your computer is able to
  83. # handle.
  84. # Possible values: auto, fixed, max.
  85. # cycleup: Amount of cycles to decrease/increase with keycombos.(CTRL-F11/CTRL-F12)
  86. # cycledown: Setting it lower than 100 will be a percentage.
  87.  
  88. core=dynamic
  89. cputype=auto
  90. cycles=max
  91. cycleup=100
  92. cycledown=100
  93.  
  94. [mixer]
  95. # nosound: Enable silent mode, sound is still emulated though.
  96. # rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.
  97. # Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
  98. # blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
  99. # Possible values: 1024, 2048, 4096, 8192, 512, 256.
  100. # prebuffer: How many milliseconds of data to keep on top of the blocksize.
  101.  
  102. nosound=false
  103. rate=44100
  104. blocksize=1024
  105. prebuffer=20
  106.  
  107. [midi]
  108. # mpu401: Type of MPU-401 to emulate.
  109. # Possible values: intelligent, uart, none.
  110. # mididevice: Device that will receive the MIDI data from MPU-401.
  111. # Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.
  112. # midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use.
  113. # or in the case of coreaudio, you can specify a soundfont here.
  114. # When using a Roland MT-32 rev. 0 as midi output device, some games may require a delay in order to prevent 'buffer overflow' issues.
  115. # In that case, add 'delaysysex', for example: midiconfig=2 delaysysex
  116. # See the README/Manual for more details.
  117.  
  118. mpu401=intelligent
  119. mididevice=default
  120. midiconfig=
  121.  
  122. [sblaster]
  123. # sbtype: Type of Soundblaster to emulate. gb is Gameblaster.
  124. # Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.
  125. # sbbase: The IO address of the soundblaster.
  126. # Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
  127. # irq: The IRQ number of the soundblaster.
  128. # Possible values: 7, 5, 3, 9, 10, 11, 12.
  129. # dma: The DMA number of the soundblaster.
  130. # Possible values: 1, 5, 0, 3, 6, 7.
  131. # hdma: The High DMA number of the soundblaster.
  132. # Possible values: 1, 5, 0, 3, 6, 7.
  133. # sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.
  134. # oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
  135. # Possible values: auto, cms, opl2, dualopl2, opl3, opl3gold, none.
  136. # oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).
  137. # Possible values: default, compat, fast.
  138. # oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).
  139. # Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.
  140.  
  141. sbtype=sb16
  142. sbbase=220
  143. irq=7
  144. dma=1
  145. hdma=5
  146. sbmixer=true
  147. oplmode=auto
  148. oplemu=default
  149. oplrate=44100
  150.  
  151. [gus]
  152. # gus: Enable the Gravis Ultrasound emulation.
  153. # gusrate: Sample rate of Ultrasound emulation.
  154. # Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
  155. # gusbase: The IO base address of the Gravis Ultrasound.
  156. # Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.
  157. # gusirq: The IRQ number of the Gravis Ultrasound.
  158. # Possible values: 5, 3, 7, 9, 10, 11, 12.
  159. # gusdma: The DMA channel of the Gravis Ultrasound.
  160. # Possible values: 3, 0, 1, 5, 6, 7.
  161. # ultradir: Path to Ultrasound directory. In this directory
  162. # there should be a MIDI directory that contains
  163. # the patch files for GUS playback. Patch sets used
  164. # with Timidity should work fine.
  165.  
  166. gus=false
  167. gusrate=44100
  168. gusbase=240
  169. gusirq=5
  170. gusdma=3
  171. ultradir=C:\ULTRASND
  172.  
  173. [speaker]
  174. # pcspeaker: Enable PC-Speaker emulation.
  175. # pcrate: Sample rate of the PC-Speaker sound generation.
  176. # Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
  177. # tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
  178. # Possible values: auto, on, off.
  179. # tandyrate: Sample rate of the Tandy 3-Voice generation.
  180. # Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
  181. # disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).
  182.  
  183. pcspeaker=true
  184. pcrate=44100
  185. tandy=auto
  186. tandyrate=44100
  187. disney=true
  188.  
  189. [joystick]
  190. # joysticktype: Type of joystick to emulate: auto (default), none,
  191. # 2axis (supports two joysticks),
  192. # 4axis (supports one joystick, first joystick used),
  193. # 4axis_2 (supports one joystick, second joystick used),
  194. # fcs (Thrustmaster), ch (CH Flightstick).
  195. # none disables joystick emulation.
  196. # auto chooses emulation depending on real joystick(s).
  197. # (Remember to reset dosbox's mapperfile if you saved it earlier)
  198. # Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.
  199. # timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).
  200. # autofire: continuously fires as long as you keep the button pressed.
  201. # swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks.
  202. # buttonwrap: enable button wrapping at the number of emulated buttons.
  203.  
  204. joysticktype=auto
  205. timed=true
  206. autofire=false
  207. swap34=false
  208. buttonwrap=false
  209.  
  210. [serial]
  211. # serial1: set type of device connected to com port.
  212. # Can be disabled, dummy, modem, nullmodem, directserial.
  213. # Additional parameters must be in the same line in the form of
  214. # parameter:value. Parameter for all types is irq (optional).
  215. # for directserial: realport (required), rxdelay (optional).
  216. # (realport:COM1 realport:ttyS0).
  217. # for modem: listenport (optional).
  218. # for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
  219. # transparent, port, inhsocket (all optional).
  220. # Example: serial1=modem listenport:5000
  221. # Possible values: dummy, disabled, modem, nullmodem, directserial.
  222. # serial2: see serial1
  223. # Possible values: dummy, disabled, modem, nullmodem, directserial.
  224. # serial3: see serial1
  225. # Possible values: dummy, disabled, modem, nullmodem, directserial.
  226. # serial4: see serial1
  227. # Possible values: dummy, disabled, modem, nullmodem, directserial.
  228.  
  229. serial1=dummy
  230. serial2=dummy
  231. serial3=disabled
  232. serial4=disabled
  233.  
  234. [dos]
  235. # xms: Enable XMS support.
  236. # ems: Enable EMS support. The default (=true) provides the best
  237. # compatibility but certain applications may run better with
  238. # other choices, or require EMS support to be disabled (=false)
  239. # to work at all.
  240. # Possible values: true, emsboard, emm386, false.
  241. # umb: Enable UMB support.
  242. # keyboardlayout: Language code of the keyboard layout (or none).
  243.  
  244. xms=true
  245. ems=true
  246. umb=true
  247. keyboardlayout=none
  248.  
  249. [autoexec]
  250. # Lines in this section will be run at startup.
  251. # You can put your MOUNT lines here.
  252. imgmount d "/recalbox/share/roms/dos/lba1.pc/LBA.DAT" -t iso
RAW Paste Data