Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@philip2:/lib/firmware# modprobe airport
- root@philip2:/lib/firmware# dmesg
- [ 0.000000] Using PowerMac machine description
- [ 0.000000] Total memory = 128MB; using 256kB for hash table (at c7fc0000)
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-powerpc (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Tue Jun 14 09:33:14 UTC 2011
- [ 0.000000] Found initrd at 0xc1b00000:0xc24a4000
- [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xc0
- [ 0.000000] Mapped at 0xff7c0000
- [ 0.000000] Found a Pangea mac-io controller, rev: 0, mapped at 0xff740000
- [ 0.000000] Processor NAP mode on idle enabled.
- [ 0.000000] PowerMac motherboard: iBook 2 rev. 2
- [ 0.000000] via-pmu: Server Mode is disabled
- [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
- [ 0.000000] bootconsole [udbg0] enabled
- [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
- [ 0.000000] PCI host bridge /pci@f0000000 ranges:
- [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
- [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
- [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
- [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
- [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
- [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
- [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
- [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
- [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
- [ 0.000000] PCI host bridge /pci@f4000000 ranges:
- [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
- [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
- [ 0.000000] nvram: Checking bank 0...
- [ 0.000000] nvram: gen0=860, gen1=861
- [ 0.000000] nvram: Active bank is: 1
- [ 0.000000] nvram: OF partition at 0x410
- [ 0.000000] nvram: XP partition at 0x1020
- [ 0.000000] nvram: NR partition at 0x1120
- [ 0.000000] Top of RAM: 0x8000000, Total RAM: 0x8000000
- [ 0.000000] Memory hole size: 0MB
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00008000
- [ 0.000000] Normal 0x00008000 -> 0x00008000
- [ 0.000000] HighMem 0x00008000 -> 0x00008000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00008000
- [ 0.000000] On node 0 totalpages: 32768
- [ 0.000000] free_area_init_node: node 0, pgdat c0505328, node_mem_map c059b000
- [ 0.000000] DMA zone: 256 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 32512 pages, LIFO batch:7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: root=UUID=605c69ee-974d-4179-918f-7d50db693d56 ro
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] High memory: 0k
- [ 0.000000] Memory: 113860k/131072k available (4928k kernel code, 17060k reserved, 280k data, 478k bss, 232k init)
- [ 0.000000] Kernel virtual memory layout:
- [ 0.000000] * 0xfffef000..0xfffff000 : fixmap
- [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
- [ 0.000000] * 0xfde72000..0xff800000 : early ioremap
- [ 0.000000] * 0xc9000000..0xfde72000 : vmalloc & ioremap
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:512
- [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
- [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
- [ 0.000000] mpic: Initializing for 64 sources
- [ 0.000000] irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55
- [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
- [ 0.000000] time_init: decrementer frequency = 24.835245 MHz
- [ 0.000000] time_init: processor frequency = 900.000000 MHz
- [ 0.000000] clocksource: timebase mult[a10fb9b] shift[22] registered
- [ 0.000000] clockevent: decrementer mult[65b9a45] shift[32] cpu[0]
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled, bootconsole disabled
- [ 0.000000] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22
- [ 0.000000] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23
- [ 0.001801] Security Framework initialized
- [ 0.001838] SELinux: Disabled at boot.
- [ 0.001861] Mount-cache hash table entries: 512
- [ 0.002361] device-tree: Duplicate name in /cpus/PowerPC,750@0, renamed to "l2-cache#1"
- [ 0.003459] device-tree: Duplicate name in /pci@f2000000/mac-io@17/gpio@50, renamed to "extint-gpio4@5c#1"
- [ 0.004482] Initializing cgroup subsys ns
- [ 0.004498] Initializing cgroup subsys cpuacct
- [ 0.004509] Initializing cgroup subsys devices
- [ 0.004574] Initializing cgroup subsys freezer
- [ 0.004585] Initializing cgroup subsys net_cls
- [ 0.006041] devtmpfs: initialized
- [ 0.006925] regulator: core version 0.5
- [ 0.007121] NET: Registered protocol family 16
- [ 0.007967] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42
- [ 0.008031] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
- [ 0.008048] channel 0 bus <multibus>
- [ 0.008056] channel 1 bus <multibus>
- [ 0.008101] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26
- [ 0.008124] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
- [ 0.008136] channel 0 bus <multibus>
- [ 0.008156] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
- [ 0.008167] channel 1 bus <multibus>
- [ 0.008176] channel 2 bus <multibus>
- [ 0.008236] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25
- [ 0.008265] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47
- [ 0.008408] PCI: Probing PCI hardware
- [ 0.008707] pci 0000:00:10.0: reg 10 32bit mmio pref: [0x98000000-0x9fffffff]
- [ 0.008718] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff]
- [ 0.008727] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
- [ 0.008745] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90020000-0x9003ffff]
- [ 0.008770] pci 0000:00:10.0: supports D1 D2
- [ 0.008832] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48
- [ 0.009120] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
- [ 0.009193] pci 0001:10:18.0: reg 10 32bit mmio: [0x80081000-0x80081fff]
- [ 0.009234] pci 0001:10:18.0: supports D1 D2
- [ 0.009241] pci 0001:10:18.0: PME# supported from D1 D2 D3hot
- [ 0.009260] pci 0001:10:18.0: PME# disabled
- [ 0.009313] pci 0001:10:19.0: reg 10 32bit mmio: [0x80080000-0x80080fff]
- [ 0.009354] pci 0001:10:19.0: supports D1 D2
- [ 0.009360] pci 0001:10:19.0: PME# supported from D1 D2 D3hot
- [ 0.009374] pci 0001:10:19.0: PME# disabled
- [ 0.009426] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
- [ 0.009449] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28
- [ 0.009789] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
- [ 0.009823] pci 0002:20:0e.0: supports D1 D2
- [ 0.009828] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
- [ 0.009844] pci 0002:20:0e.0: PME# disabled
- [ 0.009885] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
- [ 0.009907] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff]
- [ 0.009956] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40
- [ 0.009978] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41
- [ 0.010205] PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff]
- [ 0.010225] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
- [ 0.010232] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
- [ 0.010239] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff]
- [ 0.010246] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
- [ 0.010253] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
- [ 0.010260] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
- [ 0.010267] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
- [ 0.010274] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
- [ 0.013380] bio: create slab <bio-0> at 0
- [ 0.013712] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
- [ 0.013743] vgaarb: loaded
- [ 0.014106] Switching to clocksource timebase
- [ 0.018331] NET: Registered protocol family 2
- [ 0.018574] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.019190] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.019404] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.019517] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.019531] TCP reno registered
- [ 0.019719] NET: Registered protocol family 1
- [ 0.019979] Unpacking initramfs...
- [ 0.651528] Freeing initrd memory: 9872k freed
- [ 0.653108] Thermal assist unit using timers, shrink_timer: 500 jiffies
- [ 0.653582] Registering PowerMac CPU frequency driver
- [ 0.653597] Low: 400 Mhz, High: 900 Mhz, Boot: 900 Mhz
- [ 0.654075] audit: initializing netlink socket (disabled)
- [ 0.654205] type=2000 audit(1313698311.652:1): initialized
- [ 0.663536] VFS: Disk quotas dquot_6.5.2
- [ 0.663737] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.663856] msgmni has been set to 241
- [ 0.664516] alg: No test for stdrng (krng)
- [ 0.664624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.664644] io scheduler noop registered
- [ 0.664655] io scheduler anticipatory registered
- [ 0.664666] io scheduler deadline registered
- [ 0.664769] io scheduler cfq registered (default)
- [ 0.665186] radeonfb 0000:00:10.0: enabling device (0086 -> 0087)
- [ 0.858971] radeonfb 0000:00:10.0: Invalid ROM contents
- [ 0.858991] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
- [ 0.859002] radeonfb: Retrieved PLL infos from Open Firmware
- [ 0.859018] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=180.00 Mhz, System=180.00 MHz
- [ 0.859035] radeonfb: PLL min 12000 max 35000
- [ 0.955175] i2c i2c-2: unable to read EDID block.
- [ 1.107159] i2c i2c-2: unable to read EDID block.
- [ 1.259159] i2c i2c-2: unable to read EDID block.
- [ 1.411159] i2c i2c-3: unable to read EDID block.
- [ 1.563159] i2c i2c-3: unable to read EDID block.
- [ 1.715159] i2c i2c-3: unable to read EDID block.
- [ 1.771118] radeonfb: Monitor 1 type LCD found
- [ 1.771129] radeonfb: EDID probed
- [ 1.771138] radeonfb: Monitor 2 type no found
- [ 1.771166] radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
- [ 1.930134] radeonfb: Dynamic Clock Power Management enabled
- [ 1.958008] Console: switching to colour frame buffer device 128x48
- [ 1.972524] radeonfb: Backlight initialized (radeonbl0)
- [ 1.972698] radeonfb (0000:00:10.0): ATI Radeon 4c57 "LW"
- [ 1.976587] Generic non-volatile memory driver v1.1
- [ 1.976847] Linux agpgart interface v0.103
- [ 1.977027] agpgart-uninorth 0000:00:0b.0: Apple UniNorth/Pangea chipset
- [ 1.979752] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
- [ 1.980043] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
- [ 1.980334] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 1.980925] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
- [ 1.981181] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
- [ 1.981489] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
- [ 1.981804] Serial: MPC52xx PSC UART driver
- [ 1.982042] MacIO PCI driver attached to Pangea chipset
- [ 1.982668] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
- [ 1.982905] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
- [ 1.982922] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
- [ 1.982997] irq: irq 57 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 57
- [ 1.983080] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
- [ 1.983096] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
- [ 1.983227] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
- [ 1.983244] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
- [ 1.983605] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 1.984233] Uniform Multi-Platform E-IDE driver
- [ 1.984808] adb: starting probe task...
- [ 2.232739] adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
- [ 2.238598] ADB keyboard at 2, handler 1
- [ 2.238751] Detected ADB keyboard, type ANSI.
- [ 2.244304] input: ADB keyboard as /devices/virtual/input/input1
- [ 2.249864] input: ADB Powerbook buttons as /devices/virtual/input/input2
- [ 2.269740] ADB mouse at 3, handler set to 4 (trackpad)
- [ 2.333242] input: ADB mouse as /devices/virtual/input/input3
- [ 2.338618] adb: finished probe task...
- [ 3.002139] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
- [ 3.007849] Probing IDE interface ide0...
- [ 3.630453] hda: FUJITSU MHS2040AT D, ATA DISK drive
- [ 4.138136] hdb: TOSHIBA DVD-ROM SD-R2412, ATAPI CD/DVD-ROM drive
- [ 4.144013] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
- [ 4.179740] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
- [ 4.185648] hda: UDMA/33 mode selected
- [ 4.228211] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
- [ 4.228267] hdb: MWDMA2 mode selected
- [ 4.234182] ide0 at 0xc902e000-0xc902e070,0xc902e160 on irq 19
- [ 4.240258] ide-gd driver 1.18
- [ 4.246059] hda: max request size: 512KiB
- [ 4.658292] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63
- [ 4.664809] hda: cache flushes supported
- [ 4.671027] hda: [mac] hda1 hda2 hda3 hda4 hda5
- [ 4.691248] mice: PS/2 mouse device common for all mice
- [ 4.697801] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
- [ 4.705207] TCP cubic registered
- [ 4.712130] NET: Registered protocol family 10
- [ 4.720432] Mobile IPv6
- [ 4.727071] NET: Registered protocol family 17
- [ 4.733972] PM: Resume from disk failed.
- [ 4.734016] registered taskstats version 1
- [ 4.741016] input: PMU as /devices/virtual/input/input4
- [ 4.747617] Registered led device: pmu-led::front
- [ 4.754383] rtc-generic rtc-generic: setting system clock to 2011-08-18 20:11:55 UTC (1313698315)
- [ 4.761135] Initalizing network drop monitor service
- [ 4.767979] Freeing unused kernel memory: 232k init
- [ 4.861774] udev[40]: starting version 164
- [ 5.298340] usbcore: registered new interface driver usbfs
- [ 5.312973] usbcore: registered new interface driver hub
- [ 5.351117] usbcore: registered new device driver usb
- [ 5.362517] ide-cd driver 5.00
- [ 5.380538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 5.403850] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 5.410696] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.0
- [ 5.418677] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002)
- [ 5.425765] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
- [ 5.434247] ohci_hcd 0001:10:18.0: OHCI Host Controller
- [ 5.461334] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
- [ 5.468521] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
- [ 5.509828] ide-cd: hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
- [ 5.516964] Uniform CD-ROM driver Revision: 3.20
- [ 5.525089] PHY ID: 4061e4, addr: 0
- [ 5.527573] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:73:08:f6
- [ 5.534580] eth0: Found BCM5221 PHY
- [ 5.579374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- [ 5.586421] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.593171] usb usb1: Product: OHCI Host Controller
- [ 5.599939] usb usb1: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
- [ 5.606584] usb usb1: SerialNumber: 0001:10:18.0
- [ 5.618524] usb usb1: configuration #1 chosen from 1 choice
- [ 5.625592] hub 1-0:1.0: USB hub found
- [ 5.632504] hub 1-0:1.0: 2 ports detected
- [ 5.639473] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002)
- [ 5.646218] ohci_hcd 0001:10:19.0: OHCI Host Controller
- [ 5.652960] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
- [ 5.659737] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
- [ 5.742060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 5.748741] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.755227] usb usb2: Product: OHCI Host Controller
- [ 5.761593] usb usb2: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd
- [ 5.768026] usb usb2: SerialNumber: 0001:10:19.0
- [ 5.775862] usb usb2: configuration #1 chosen from 1 choice
- [ 5.782692] hub 2-0:1.0: USB hub found
- [ 5.789221] hub 2-0:1.0: 2 ports detected
- [ 5.914502] firewire_core: created device fw0: GUID 000a95fffe7308f6, S400
- [ 6.134488] PM: Starting manual resume from disk
- [ 6.141075] PM: Resume from partition 3:4
- [ 6.141080] PM: Checking hibernation image.
- [ 6.168919] PM: Error -22 checking image file
- [ 6.168927] PM: Resume from disk failed.
- [ 6.300132] kjournald starting. Commit interval 5 seconds
- [ 6.306923] EXT3-fs: mounted filesystem with ordered data mode.
- [ 8.956567] udev[172]: starting version 164
- [ 9.882783] PowerMac i2c bus pmu 2 registered
- [ 9.892711] PowerMac i2c bus pmu 1 registered
- [ 9.900596] PowerMac i2c bus mac-io 0 registered
- [ 9.908677] PowerMac i2c bus uni-n 1 registered
- [ 9.920830] PowerMac i2c bus uni-n 0 registered
- [ 10.300444] cfg80211: Using static regulatory domain info
- [ 10.307233] cfg80211: Regulatory domain: US
- [ 10.313709] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 10.320334] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
- [ 10.327178] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 10.333732] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 10.340185] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 10.346548] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 10.352791] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- [ 10.408618] cfg80211: Calling CRDA for country: US
- [ 10.527047] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
- [ 10.549434] airport 0.15 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
- [ 10.549544] airport: Physical address 80030000
- [ 11.754822] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0000
- [ 11.761422] airport 0.00030000:radio: Station identity 001f:0001:0008:0046
- [ 11.767728] airport 0.00030000:radio: Firmware determined as Lucent/Agere 8.70
- [ 11.774613] airport 0.00030000:radio: firmware: requesting agere_sta_fw.bin
- [ 11.845309] airport 0.00030000:radio: firmware: requesting agere_sta_fw.bin
- [ 11.873871] airport 0.00030000:radio: Cannot find firmware agere_sta_fw.bin
- [ 11.880189] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0000
- [ 11.886384] airport 0.00030000:radio: Station identity 001f:0001:0008:0046
- [ 11.892461] airport 0.00030000:radio: Firmware determined as Lucent/Agere 8.70
- [ 11.898469] airport 0.00030000:radio: Ad-hoc demo mode supported
- [ 11.904414] airport 0.00030000:radio: IEEE standard IBSS ad-hoc mode supported
- [ 11.910459] airport 0.00030000:radio: WEP supported, 104-bit key
- [ 14.044463] Adding 363984k swap on /dev/hda4. Priority:-1 extents:1 across:363984k
- [ 14.529214] EXT3 FS on hda3, internal journal
- [ 14.940678] SCSI subsystem initialized
- [ 15.104332] loop: module loaded
- [ 15.198502] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
- [ 15.198563] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
- [ 15.210108] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58
- [ 15.628387] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5
- [ 18.216489] fuse init (API version 7.13)
- [ 23.394718] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 23.403256] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 26.088766] Bluetooth: Core ver 2.15
- [ 26.090024] NET: Registered protocol family 31
- [ 26.091017] Bluetooth: HCI device and connection manager initialized
- [ 26.091996] Bluetooth: HCI socket layer initialized
- [ 26.415298] Bluetooth: L2CAP ver 2.14
- [ 26.416293] Bluetooth: L2CAP socket layer initialized
- [ 26.452481] Bluetooth: RFCOMM TTY layer initialized
- [ 26.453529] Bluetooth: RFCOMM socket layer initialized
- [ 26.454502] Bluetooth: RFCOMM ver 1.11
- [ 26.641271] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 26.642338] Bluetooth: BNEP filters: protocol multicast
- [ 26.991597] Bridge firewalling registered
- [ 27.098111] Bluetooth: SCO (Voice Link) ver 0.6
- [ 27.099143] Bluetooth: SCO socket layer initialized
- [ 28.217225] radeonfb 0000:00:10.0: Invalid ROM contents
- [ 28.217389] radeonfb 0000:00:10.0: Invalid ROM contents
- [ 28.467112] [drm] Initialized drm 1.1.0 20060810
- [ 28.870945] [drm] radeon defaulting to userspace modesetting.
- [ 28.877389] [drm] Initialized radeon 1.32.0 20080528 for 0000:00:10.0 on minor 0
- [ 29.896102] agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 2x mode
- [ 29.896126] radeonfb 0000:00:10.0: putting AGP V2 device into 2x mode
- [ 30.260752] [drm] Setting GART location based on new memory map
- [ 30.260966] [drm] Loading R100 Microcode
- [ 30.263112] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
- [ 30.281385] radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
- [ 30.281403] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
- [ 378.726272] eth0: Link is up at 100 Mbps, full-duplex.
- [ 378.726289] eth0: Pause is disabled
- [ 378.726508] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 389.474135] eth0: no IPv6 routers present
- [ 622.326204] eth0: Link down
- [ 624.726275] eth0: Link is up at 100 Mbps, full-duplex.
- [ 624.726293] eth0: Pause is disabled
- [ 2241.069251] airport 0.15 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
- [ 2241.069359] airport: Physical address 80030000
- [ 2242.274737] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0000
- [ 2242.274868] airport 0.00030000:radio: Station identity 001f:0001:0008:0046
- [ 2242.274879] airport 0.00030000:radio: Firmware determined as Lucent/Agere 8.70
- [ 2242.275045] airport 0.00030000:radio: firmware: requesting agere_sta_fw.bin
- [ 2242.738794] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0000
- [ 2242.738926] airport 0.00030000:radio: Station identity 001f:0002:0009:0030
- [ 2242.738937] airport 0.00030000:radio: Firmware determined as Lucent/Agere 9.48
- [ 2242.738944] airport 0.00030000:radio: Ad-hoc demo mode supported
- [ 2242.738950] airport 0.00030000:radio: IEEE standard IBSS ad-hoc mode supported
- [ 2242.738956] airport 0.00030000:radio: WEP supported, 104-bit key
- [ 2242.738962] airport 0.00030000:radio: WPA-PSK supported
- [ 2244.148675] ADDRCONF(NETDEV_UP): eth1: link is not ready
- root@philip2:/lib/firmware#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement