SHARE
TWEET

Untitled

a guest Nov 29th, 2019 137 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Linux cloudshell 5.4.0+ #1 SMP PREEMPT Thu Nov 28 22:40:35 CST 2019 armv7l
  2. Last login: Fri Nov 29 00:07:25 2019 from 192.168.0.38
  3. root@cloudshell:~# dmesg
  4. [    0.000000] Booting Linux on physical CPU 0x100
  5. [    0.000000] Linux version 5.4.0+ (rooted@cloudshell) (gcc version 8.2.0 (Debian 8.2.0-1)) #1 SMP PREEMPT Thu Nov 28 22:40:35 CST 2019
  6. [    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  7. [    0.000000] CPU: div instructions available: patching division code
  8. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  9. [    0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
  10. [    0.000000] Memory policy: Data cache writealloc
  11. [    0.000000] cma: Reserved 128 MiB at 0xb6800000
  12. [    0.000000] Samsung CPU ID: 0xe5422001
  13. [    0.000000] On node 0 totalpages: 518656
  14. [    0.000000]   Normal zone: 1728 pages used for memmap
  15. [    0.000000]   Normal zone: 0 pages reserved
  16. [    0.000000]   Normal zone: 196608 pages, LIFO batch:63
  17. [    0.000000]   HighMem zone: 322048 pages, LIFO batch:63
  18. [    0.000000] Running under secure firmware.
  19. [    0.000000] percpu: Embedded 20 pages/cpu s52364 r8192 d21364 u81920
  20. [    0.000000] pcpu-alloc: s52364 r8192 d21364 u81920 alloc=20*4096
  21. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  22. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
  23. [    0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0 pty.legacy_count=2  smsc95xx.macaddr=00:1e:06:61:7a:87  governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi  s5p_mfc.mem=16M
  24. [    0.000000] hdmi: using HDMI mode
  25. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  26. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  27. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  28. [    0.000000] Memory: 1903388K/2074624K available (9216K kernel code, 777K rwdata, 2708K rodata, 1024K init, 320K bss, 40164K reserved, 131072K cma-reserved, 1157120K highmem)
  29. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  30. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  31. [    0.000000]  Tasks RCU enabled.
  32. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  33. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  34. [    0.000000] GIC: Using split EOI/Deactivate mode
  35. [    0.000000] random: get_random_bytes called from start_kernel+0x32c/0x4f0 with crng_init=0
  36. [    0.000000] Switching to timer-based delay loop, resolution 41ns
  37. [    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  38. [    0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  39. [    0.000032] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
  40. [    0.001598] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  41. [    0.001618] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  42. [    0.001638] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  43. [    0.001651] Ignoring duplicate/late registration of read_current_timer delay
  44. [    0.002127] Console: colour dummy device 80x30
  45. [    0.002789] printk: console [tty1] enabled
  46. [    0.002842] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  47. [    0.002883] pid_max: default: 32768 minimum: 301
  48. [    0.003111] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  49. [    0.003156] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  50. [    0.004376] CPU: Testing write buffer coherency: ok
  51. [    0.004938] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
  52. [    0.028052] Setting up static identity map for 0x40100000 - 0x40100060
  53. [    0.028381] ARM CCI driver probed
  54. [    0.028627] Exynos MCPM support installed
  55. [    0.035991] rcu: Hierarchical SRCU implementation.
  56. [    0.046161] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected
  57. [    0.051991] smp: Bringing up secondary CPUs ...
  58. [    0.084381] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
  59. [    0.116338] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
  60. [    0.148336] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
  61. [    0.180364] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
  62. [    0.180374] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  63. [    0.212350] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
  64. [    0.212357] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  65. [    0.244350] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
  66. [    0.244358] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  67. [    0.276359] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
  68. [    0.276366] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  69. [    0.276603] smp: Brought up 1 node, 8 CPUs
  70. [    0.276652] SMP: Total of 8 processors activated (384.00 BogoMIPS).
  71. [    0.276676] CPU: All CPU(s) started in HYP mode.
  72. [    0.276694] CPU: Virtualization extensions available.
  73. [    0.277782] devtmpfs: initialized
  74. [    0.299129] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
  75. [    0.299739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  76. [    0.299796] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  77. [    0.306682] pinctrl core: initialized pinctrl subsystem
  78. [    0.310063] NET: Registered protocol family 16
  79. [    0.317107] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  80. [    0.318854] audit: initializing netlink subsys (disabled)
  81. [    0.319196] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1
  82. [    0.320191] cpuidle: using governor menu
  83. [    0.321083] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  84. [    0.321120] hw-breakpoint: maximum watchpoint size is 8 bytes.
  85. [    0.383512] EXYNOS5420 PMU initialized
  86. [    0.404367] random: fast init done
  87. [    0.496762] iommu: Default domain type: Translated
  88. [    0.497395] usbcore: registered new interface driver usbfs
  89. [    0.497477] usbcore: registered new interface driver hub
  90. [    0.497654] usbcore: registered new device driver usb
  91. [    0.498403] s3c-i2c 12c80000.i2c: slave address 0x00
  92. [    0.498439] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
  93. [    0.498816] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
  94. [    0.499371] mc: Linux media interface: v0.10
  95. [    0.499438] videodev: Linux video capture interface: v2.00
  96. [    0.499598] pps_core: LinuxPPS API ver. 1 registered
  97. [    0.499621] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  98. [    0.500268] Advanced Linux Sound Architecture Driver Initialized.
  99. [    0.501885] clocksource: Switched to clocksource mct-frc
  100. [    1.161295] VFS: Disk quotas dquot_6.6.0
  101. [    1.161386] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  102. [    1.174732] thermal_sys: Registered thermal governor 'step_wise'
  103. [    1.177061] NET: Registered protocol family 2
  104. [    1.178003] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  105. [    1.178056] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  106. [    1.178150] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  107. [    1.178319] TCP: Hash tables configured (established 8192 bind 8192)
  108. [    1.178439] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  109. [    1.178493] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  110. [    1.178730] NET: Registered protocol family 1
  111. [    1.179497] RPC: Registered named UNIX socket transport module.
  112. [    1.179521] RPC: Registered udp transport module.
  113. [    1.179595] RPC: Registered tcp transport module.
  114. [    1.179616] RPC: Registered tcp NFSv4.1 backchannel transport module.
  115. [    1.179858] Trying to unpack rootfs image as initramfs...
  116. [    1.534787] Freeing initrd memory: 5788K
  117. [    1.536634] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  118. [    1.537420] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  119. [    1.541683] Initialise system trusted keyrings
  120. [    1.541985] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  121. [    1.551044] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  122. [    1.551888] NFS: Registering the id_resolver key type
  123. [    1.551928] Key type id_resolver registered
  124. [    1.551947] Key type id_legacy registered
  125. [    1.551976] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  126. [    1.552029] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
  127. [    1.588301] Key type asymmetric registered
  128. [    1.588326] Asymmetric key parser 'x509' registered
  129. [    1.588394] bounce: pool size: 64 pages
  130. [    1.588444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  131. [    1.588718] io scheduler mq-deadline registered
  132. [    1.588739] io scheduler kyber registered
  133. [    1.588909] io scheduler bfq registered
  134. [    1.591507] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
  135. [    1.592522] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
  136. [    1.592627] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
  137. [    1.593015] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
  138. [    1.593130] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
  139. [    1.606252] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
  140. [    1.606282] dma-pl330 121a0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  141. [    1.608966] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
  142. [    1.608993] dma-pl330 121b0000.pdma:         DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  143. [    1.609924] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
  144. [    1.609951] dma-pl330 10800000.mdma:         DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  145. [    1.611556] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  146. [    1.613705] samsung-uart 12c00000.serial: IRQ index 1 not found
  147. [    1.613779] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 62, base_baud = 0) is a S3C6400/10
  148. [    1.614233] samsung-uart 12c10000.serial: IRQ index 1 not found
  149. [    1.614295] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 63, base_baud = 0) is a S3C6400/10
  150. [    1.614685] samsung-uart 12c20000.serial: IRQ index 1 not found
  151. [    1.614746] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 64, base_baud = 0) is a S3C6400/10
  152. [    2.527260] printk: console [ttySAC2] enabled
  153. [    2.531934] samsung-uart 12c30000.serial: IRQ index 1 not found
  154. [    2.537506] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 65, base_baud = 0) is a S3C6400/10
  155. [    2.547983] exynos-trng 10830600.rng: Exynos True Random Number Generator.
  156. [    2.554361] exynos-mixer 14450000.mixer: Adding to iommu group 0
  157. [    2.562037] exynos-drm-g2d 10850000.g2d: Adding to iommu group 1
  158. [    2.568117] exynos-rotator 11c00000.rotator: Adding to iommu group 2
  159. [    2.580588] mali 11800000.gpu: Continuing without Mali regulator control
  160. [    2.587181] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0
  161. [    2.592717] mali 11800000.gpu: Protected mode not available
  162. [    2.598813] mali 11800000.gpu: Probed as mali0
  163. [    2.613284] brd: module loaded
  164. [    2.615667] libphy: Fixed MDIO Bus: probed
  165. [    2.619318] usbcore: registered new interface driver r8152
  166. [    2.624473] usbcore: registered new interface driver cdc_ether
  167. [    2.630275] usbcore: registered new interface driver cdc_subset
  168. [    2.638374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  169. [    2.643485] ehci-exynos: EHCI EXYNOS driver
  170. [    2.647966] exynos-ehci 12110000.usb: EHCI Host Controller
  171. [    2.653104] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
  172. [    2.660973] exynos-ehci 12110000.usb: irq 82, io mem 0x12110000
  173. [    2.681937] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
  174. [    2.686781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
  175. [    2.694745] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  176. [    2.701951] usb usb1: Product: EHCI Host Controller
  177. [    2.702060] devfreq devfreq0: Couldn't update frequency transition information.
  178. [    2.706781] usb usb1: Manufacturer: Linux 5.4.0+ ehci_hcd
  179. [    2.706789] usb usb1: SerialNumber: 12110000.usb
  180. [    2.707776] hub 1-0:1.0: USB hub found
  181. [    2.727833] hub 1-0:1.0: 3 ports detected
  182. [    2.732699] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  183. [    2.737918] ohci-exynos: OHCI EXYNOS driver
  184. [    2.742255] exynos-ohci 12120000.usb: USB Host Controller
  185. [    2.747444] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
  186. [    2.755179] exynos-ohci 12120000.usb: irq 82, io mem 0x12120000
  187. [    2.822185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
  188. [    2.829020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  189. [    2.836201] usb usb2: Product: USB Host Controller
  190. [    2.840964] usb usb2: Manufacturer: Linux 5.4.0+ ohci_hcd
  191. [    2.846338] usb usb2: SerialNumber: 12120000.usb
  192. [    2.851505] hub 2-0:1.0: USB hub found
  193. [    2.854735] hub 2-0:1.0: 3 ports detected
  194. [    2.860876] mousedev: PS/2 mouse device common for all mice
  195. [    2.866252] i2c /dev entries driver
  196. [    2.891690] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
  197. [    2.909170] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
  198. [    2.930031] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
  199. [    2.996663] vdd_2.0v_ldo: Bringing 1650000uV into 1800000-1800000uV
  200. [    3.019773] s5m-rtc s2mps14-rtc: registered as rtc0
  201. [    3.023774] s2mps11-clk s2mps11-clk: DMA mask not set
  202. [    3.031252] s5p-jpeg 11f50000.jpeg: Adding to iommu group 3
  203. [    3.035760] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0
  204. [    3.042593] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1
  205. [    3.049427] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
  206. [    3.055072] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4
  207. [    3.060775] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2
  208. [    3.067628] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video3
  209. [    3.074470] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
  210. [    3.080629] s5p-mfc 11000000.codec: Adding to iommu group 5
  211. [    3.103585] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
  212. [    3.111292] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2
  213. [    3.119896] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel
  214. [    3.130448] s5p-mfc 11000000.codec: decoder registered as /dev/video4
  215. [    3.136839] s5p-mfc 11000000.codec: encoder registered as /dev/video5
  216. [    3.145160] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6
  217. [    3.151373] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7
  218. [    3.167239] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
  219. [    3.174706] device-mapper: uevent: version 1.0.3
  220. [    3.179003] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
  221. [    3.203740] sdhci: Secure Digital Host Controller Interface driver
  222. [    3.208476] sdhci: Copyright(c) Pierre Ossman
  223. [    3.212980] Synopsys Designware Multimedia Card Interface Driver
  224. [    3.219343] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
  225. [    3.225709] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
  226. [    3.232034] dwmmc_exynos 12200000.mmc: Version ID is 250a
  227. [    3.237423] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo
  228. [    3.246866] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
  229. [    3.269562] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  230. [    3.290677] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
  231. [    3.296136] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
  232. [    3.302527] dwmmc_exynos 12220000.mmc: Version ID is 250a
  233. [    3.307911] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 85,64 bit host data width,64 deep fifo
  234. [    3.332651] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  235. [    3.354463] ledtrig-cpu: registered to indicate activity on CPUs
  236. [    3.371181] s5p-secss 10830000.sss: s5p-sss driver registered
  237. [    3.375756] hidraw: raw HID events driver (C) Jiri Kosina
  238. [    3.388840] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
  239. [    3.394140] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
  240. [    3.400687] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
  241. [    3.407292] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
  242. [    3.414133] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0)
  243. [    3.422181] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1)
  244. [    3.429660] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0)
  245. [    3.437547] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1)
  246. [    3.445790] exynos-adc 12d10000.adc: IRQ index 1 not found
  247. [    3.456540] NET: Registered protocol family 17
  248. [    3.459544] NET: Registered protocol family 15
  249. [    3.463979] Key type dns_resolver registered
  250. [    3.468716] Registering SWP/SWPB emulation handler
  251. [    3.473108] registered taskstats version 1
  252. [    3.477035] Loading compiled-in X.509 certificates
  253. [    3.481927] Key type ._fscrypt registered
  254. [    3.485759] Key type .fscrypt registered
  255. [    3.495638] Key type encrypted registered
  256. [    3.532801] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing
  257. [    3.537822] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing
  258. [    3.546309] OF: graph: no port node found in /soc/hdmi@14530000
  259. [    3.551605] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
  260. [    3.558536] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0a6cecc)
  261. [    3.565164] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0a6d550)
  262. [    3.571819] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered.
  263. [    3.579968] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0a6e498)
  264. [    3.586470] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
  265. [    3.594872] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0a6ed28)
  266. [    3.601713] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  267. [    3.608298] [drm] No driver support for vblank timestamp query.
  268. [    3.614221] [drm] Cannot find any crtc or sizes
  269. [    3.619198] [drm] Cannot find any crtc or sizes
  270. [    3.623472] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
  271. [    3.624767] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
  272. [    3.633357] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
  273. [    3.647170] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  274. [    3.656343] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  275. [    3.658996] mmc_host mmc0: Bus speed (slot 0) = 266666666Hz (slot req 200000000Hz, actual 133333333HZ div = 1)
  276. [    3.661023] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
  277. [    3.671483] mmc0: new HS400 MMC card at address 0001
  278. [    3.679181] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
  279. [    3.684536] mmcblk0: mmc0:0001 SDW32G 29.1 GiB
  280. [    3.693153] xhci-hcd xhci-hcd.7.auto: irq 162, io mem 0x12000000
  281. [    3.697763] mmcblk0boot0: mmc0:0001 SDW32G partition 1 4.00 MiB
  282. [    3.704417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
  283. [    3.709638] mmcblk0boot1: mmc0:0001 SDW32G partition 2 4.00 MiB
  284. [    3.717486] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  285. [    3.717492] usb usb3: Product: xHCI Host Controller
  286. [    3.723589] mmcblk0rpmb: mmc0:0001 SDW32G partition 3 4.00 MiB, chardev (244:0)
  287. [    3.730570] usb usb3: Manufacturer: Linux 5.4.0+ xhci-hcd
  288. [    3.730574] usb usb3: SerialNumber: xhci-hcd.7.auto
  289. [    3.731324] hub 3-0:1.0: USB hub found
  290. [    3.738059]  mmcblk0: p1 p2
  291. [    3.742754] hub 3-0:1.0: 1 port detected
  292. [    3.763540] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  293. [    3.768800] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
  294. [    3.776417] xhci-hcd xhci-hcd.7.auto: Host supports USB 3.0 SuperSpeed
  295. [    3.782957] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  296. [    3.791059] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
  297. [    3.799202] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  298. [    3.806393] usb usb4: Product: xHCI Host Controller
  299. [    3.811246] usb usb4: Manufacturer: Linux 5.4.0+ xhci-hcd
  300. [    3.816615] usb usb4: SerialNumber: xhci-hcd.7.auto
  301. [    3.821808] hub 4-0:1.0: USB hub found
  302. [    3.825217] hub 4-0:1.0: 1 port detected
  303. [    3.830813] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
  304. [    3.835306] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  305. [    3.840393] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
  306. [    3.848215] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
  307. [    3.857425] xhci-hcd xhci-hcd.8.auto: irq 163, io mem 0x12400000
  308. [    3.863604] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
  309. [    3.871577] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  310. [    3.878775] usb usb5: Product: xHCI Host Controller
  311. [    3.883618] usb usb5: Manufacturer: Linux 5.4.0+ xhci-hcd
  312. [    3.888990] usb usb5: SerialNumber: xhci-hcd.8.auto
  313. [    3.894174] hub 5-0:1.0: USB hub found
  314. [    3.897565] hub 5-0:1.0: 1 port detected
  315. [    3.901662] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  316. [    3.906939] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 6
  317. [    3.914559] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
  318. [    3.921099] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  319. [    3.929206] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
  320. [    3.937350] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  321. [    3.944539] usb usb6: Product: xHCI Host Controller
  322. [    3.949388] usb usb6: Manufacturer: Linux 5.4.0+ xhci-hcd
  323. [    3.954761] usb usb6: SerialNumber: xhci-hcd.8.auto
  324. [    3.959924] hub 6-0:1.0: USB hub found
  325. [    3.963359] hub 6-0:1.0: 1 port detected
  326. [    3.968232] rtc rtc1: invalid alarm value: 1900-01-02T00:00:00
  327. [    3.973159] s3c-rtc 101e0000.rtc: registered as rtc1
  328. [    3.979526] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
  329. [    3.986814] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
  330. [    3.994757] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
  331. [    4.003129] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
  332. [    4.011431] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
  333. [    4.019778] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
  334. [    4.027784] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
  335. [    4.035729] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~  67000 KHz)
  336. [    4.044041] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
  337. [    4.052052] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
  338. [    4.060468] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
  339. [    4.068596] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
  340. [    4.076982] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
  341. [    4.085700] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
  342. [    4.093966] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
  343. [    4.102790] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
  344. [    4.114274] s5m-rtc s2mps14-rtc: setting system clock to 2019-11-29T06:07:55 UTC (1575007675)
  345. [    4.162541] ALSA device list:
  346. [    4.164033]   No soundcards found.
  347. [    4.168070] Freeing unused kernel memory: 1024K
  348. [    4.190102] Run /init as init process
  349. [    4.221266] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  350. [    4.223430] random: udevadm: uninitialized urandom read (16 bytes read)
  351. [    4.227416] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  352. [    4.238064] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  353. [    4.270926] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=22.23
  354. [    4.277648] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  355. [    4.284745] usb 4-1: Product: USB3.0 Hub
  356. [    4.288640] usb 4-1: Manufacturer: GenesysLogic
  357. [    4.311553] hub 4-1:1.0: USB hub found
  358. [    4.314133] hub 4-1:1.0: 2 ports detected
  359. [    4.393927] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  360. [    4.560601] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.23
  361. [    4.567934] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  362. [    4.574569] usb 3-1: Product: USB2.0 Hub
  363. [    4.578439] usb 3-1: Manufacturer: GenesysLogic
  364. [    4.647262] hub 3-1:1.0: USB hub found
  365. [    4.649828] hub 3-1:1.0: 2 ports detected
  366. [    4.687963] usb 4-1.2: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  367. [    4.794204] usb 4-1.2: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=90.01
  368. [    4.801097] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  369. [    4.808371] usb 4-1.2: Product: USB3.0 Hub
  370. [    4.813566] usb 4-1.2: Manufacturer: VIA Labs, Inc.
  371. [    4.839295] hub 4-1.2:1.0: USB hub found
  372. [    4.841895] hub 4-1.2:1.0: 4 ports detected
  373. [    5.603920] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
  374. [    5.609154] dma-pl330 3880000.adma:  DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
  375. [    5.618564] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
  376. [    5.628663] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok
  377. [    5.634351] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok
  378. [    5.642367] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok
  379. [    5.648533] dma-pl330 3880000.adma: PM domain MAU will not be powered off
  380. [    5.718176] usb 4-1.1: new SuperSpeed Gen 1 USB device number 4 using xhci-hcd
  381. [    5.745347] usb 4-1.1: New USB device found, idVendor=05e3, idProduct=0735, bcdDevice=10.03
  382. [    5.753551] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  383. [    5.760813] usb 4-1.1: Product: USB3.0 SATA Bridge
  384. [    5.765596] usb 4-1.1: Manufacturer: USB Storage
  385. [    5.770145] usb 4-1.1: SerialNumber: 0000000000000033
  386. [    5.786079] SCSI subsystem initialized
  387. [    5.792078] usb-storage 4-1.1:1.0: USB Mass Storage device detected
  388. [    5.797792] scsi host0: usb-storage 4-1.1:1.0
  389. [    5.801559] usbcore: registered new interface driver usb-storage
  390. [    5.807709] usbcore: registered new interface driver uas
  391. [    5.838235] usb 4-1.2.1: new SuperSpeed Gen 1 USB device number 5 using xhci-hcd
  392. [    5.868735] usb 4-1.2.1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
  393. [    5.875794] usb 4-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  394. [    5.883258] usb 4-1.2.1: Product: AX88179
  395. [    5.887252] usb 4-1.2.1: Manufacturer: ASIX Elec. Corp.
  396. [    5.892438] usb 4-1.2.1: SerialNumber: 00000000000241
  397. [    5.949920] usb 3-1.2: new high-speed USB device number 4 using xhci-hcd
  398. [    5.983230] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  399. [    6.059695] usb 3-1.2: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.01
  400. [    6.066589] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  401. [    6.073859] usb 3-1.2: Product: USB2.0 Hub
  402. [    6.079055] usb 3-1.2: Manufacturer: VIA Labs, Inc.
  403. [    6.119229] hub 3-1.2:1.0: USB hub found
  404. [    6.121879] hub 3-1.2:1.0: 4 ports detected
  405. [    6.175523] NET: Registered protocol family 10
  406. [    6.179174] Segment Routing with IPv6
  407. [    6.217378] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  408. [    6.234208] systemd[1]: Detected architecture arm.
  409. [    6.256093] systemd[1]: Set hostname to <cloudshell>.
  410. [    6.420398] systemd[1]: haveged.service: Cannot add dependency job, ignoring: Unit haveged.service is masked.
  411. [    6.430679] systemd[1]: Listening on Journal Audit Socket.
  412. [    6.437909] usb 3-1.2.3: new high-speed USB device number 5 using xhci-hcd
  413. [    6.458108] systemd[1]: Listening on Journal Socket.
  414. [    6.478059] systemd[1]: Listening on udev Control Socket.
  415. [    6.498024] systemd[1]: Listening on RPCbind Server Activation Socket.
  416. [    6.522496] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  417. [    6.550340] systemd[1]: Created slice User and Session Slice.
  418. [    6.554824] usb 3-1.2.3: config 1 interface 0 altsetting 0 endpoint 0x81 has wMaxPacketSize 0, skipping
  419. [    6.563986] usb 3-1.2.3: config 1 interface 0 altsetting 0 endpoint 0x82 has wMaxPacketSize 0, skipping
  420. [    6.573342] usb 3-1.2.3: config 1 interface 2 altsetting 0 endpoint 0x84 has wMaxPacketSize 0, skipping
  421. [    6.604612] usb 3-1.2.3: New USB device found, idVendor=2040, idProduct=7217, bcdDevice= 0.05
  422. [    6.611670] usb 3-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=10
  423. [    6.619204] usb 3-1.2.3: Product: HP Digital/Analog TV
  424. [    6.624314] usb 3-1.2.3: Manufacturer: HP
  425. [    6.628300] usb 3-1.2.3: SerialNumber: 4032679065
  426. [    6.818616] scsi 0:0:0:0: Direct-Access     ST500LT0 12-9WS142        1003 PQ: 0 ANSI: 6
  427. [    6.924145] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro,discard
  428. [    7.343848] systemd-journald[289]: Received request to flush runtime journal from PID 1
  429. [    7.524025] input: gpio_keys as /devices/platform/gpio_keys/input/input0
  430. [    7.891875] scsi 0:0:0:0: Attached scsi generic sg0 type 0
  431. [    7.902097] sd 0:0:0:0: [sda] 976773152 512-byte logical blocks: (500 GB/466 GiB)
  432. [    7.906278] au0828: au0828 driver loaded
  433. [    7.909214] sd 0:0:0:0: [sda] Write Protect is off
  434. [    7.916860] sd 0:0:0:0: [sda] Mode Sense: 5f 00 10 08
  435. [    7.917573] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  436. [    8.274282] ax88179_178a 4-1.2.1:1.0 eth0: register 'ax88179_178a' at usb-xhci-hcd.7.auto-1.2.1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0e:c6:d1:51:ef
  437. [    8.286649] usbcore: registered new interface driver ax88179_178a
  438. [    8.294157] au0828: i2c bus registered
  439. [    8.294767] random: crng init done
  440. [    8.299826] random: 7 urandom warning(s) missed due to ratelimiting
  441. [    8.346018] tveeprom: Hauppauge model 72211, rev B3F0, serial# 4032679065
  442. [    8.351425] tveeprom: MAC address is 00:0d:fe:5d:cc:99
  443. [    8.356526] tveeprom: tuner model is Xceive XC5000 (idx 150, type 76)
  444. [    8.362931] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
  445. [    8.369689] tveeprom: audio processor is AU8522 (idx 44)
  446. [    8.374982] tveeprom: decoder processor is AU8522 (idx 42)
  447. [    8.380422] tveeprom: has no radio, has IR receiver, has no IR transmitter
  448. [    8.387271] au0828: hauppauge_eeprom: hauppauge eeprom: model=72211
  449. [    8.395021]  sda: sda1
  450. [    8.399063] sd 0:0:0:0: [sda] Attached SCSI disk
  451. [    8.404853] au8522 11-0047: creating new instance
  452. [    8.409460] au8522_decoder creating new instance...
  453. [    8.421618] tuner: 11-0061: Tuner -1 found with type(s) Radio TV.
  454. [    8.426365] xc5000 11-0061: creating new instance
  455. [    8.434795] xc5000: Successfully identified at address 0x61
  456. [    8.438958] xc5000: Firmware has not been loaded previously
  457. [    8.673724] au8522 11-0047: attaching existing instance
  458. [    8.679155] xc5000 11-0061: attaching existing instance
  459. [    8.686626] xc5000: Successfully identified at address 0x61
  460. [    8.690731] xc5000: Firmware has not been loaded previously
  461. [    8.699714] dvbdev: DVB: registering new adapter (au0828)
  462. [    8.703664] usb 3-1.2.3: DVB: registering adapter 0 frontend 0 (Auvitek AU8522 QAM/8VSB Frontend)...
  463. [    8.712764] dvbdev: dvb_create_media_entity: media entity 'Auvitek AU8522 QAM/8VSB Frontend' registered.
  464. [    8.723019] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
  465. [    8.809141] Registered IR keymap rc-hauppauge
  466. [    8.817009] IR RC5(x/sz) protocol handler initialized
  467. [    8.845989] rc rc0: au0828 IR (Hauppauge HVR950Q) as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.7.auto/usb3/3-1/3-1.2/3-1.2.3/rc/rc0
  468. [    8.857674] input: au0828 IR (Hauppauge HVR950Q) as /devices/platform/soc/soc:usb3-0/12000000.dwc3/xhci-hcd.7.auto/usb3/3-1/3-1.2/3-1.2.3/rc/rc0/input1
  469. [    8.873001] au0828: Remote controller au0828 IR (Hauppauge HVR950Q) initialized
  470. [    8.878850] au0828: Registered device AU0828 [Hauppauge HVR950Q]
  471. [    8.885266] usbcore: registered new interface driver au0828
  472. [    8.926284] au0828: Enabled Source: Xceive XC5000->au8522 11-0047->au0828a video Ret 0
  473. [    8.999013] au0828: Disabled Source: Xceive XC5000->au8522 11-0047->au0828a video Ret 0
  474. [    9.031563] usbcore: registered new interface driver snd-usb-audio
  475. [    9.175650] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
  476. [   10.096483] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  477. [   10.112845] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  478. [   10.119383] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  479. [   10.126554] cfg80211: failed to load regulatory.db
  480. [   10.485299] au0828: Enabled Source: Xceive XC5000->Auvitek AU8522 QAM/8VSB Frontend->Auvitek AU8522 QAM/8VSB Frontend Ret 0
  481. [   12.268153] xc5000: Firmware dvb-fe-xc5000-1.6.114.fw loaded and running.
  482. [   12.274158] usb 3-1.2.3: DVB: adapter 0 frontend 0 frequency 0 out of range (54000000..858000000)
  483. [   12.282380] au0828: Disabled Source: Xceive XC5000->Auvitek AU8522 QAM/8VSB Frontend->Auvitek AU8522 QAM/8VSB Frontend Ret 0
  484. [   12.300194] au0828: Enabled Source: Xceive XC5000->Auvitek AU8522 QAM/8VSB Frontend->Auvitek AU8522 QAM/8VSB Frontend Ret 0
  485. [   12.486938] ax88179_178a 4-1.2.1:1.0 eth0: ax88179 - Link status is: 1
  486. [   12.497905] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  487. root@cloudshell:~#
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top