Failing/failed drive

[   28.379828] ata6.00: configured for UDMA/133
[   28.379838] sd 5:0:0:0: [sde] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   28.379840] sd 5:0:0:0: [sde] tag#9 Sense Key : Illegal Request [current]
[   28.379841] sd 5:0:0:0: [sde] tag#9 Add. Sense: Unaligned write command
[   28.379843] sd 5:0:0:0: [sde] tag#9 CDB: Read(10) 28 00 00 00 02 00 00 00 08 00
[   28.379845] blk_update_request: I/O error, dev sde, sector 512 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   28.379862] ata6: EH complete
[   28.417936] ata6.00: exception Emask 0x10 SAct 0x400 SErr 0x90202 action 0xe frozen
[   28.417939] ata6.00: irq_stat 0x00400000, PHY RDY changed
[   28.417942] ata6: SError: { RecovComm Persist PHYRdyChg 10B8B }
[   28.417946] ata6.00: failed command: READ FPDMA QUEUED
[   28.417955] ata6.00: cmd 60/08:50:00:04:00/00:00:00:00:00/40 tag 10 ncq dma 4096 in
                        res 40/00:54:00:04:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   28.417957] ata6.00: status: { DRDY }
[   28.417962] ata6: hard resetting link
[   34.732871] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   40.172817] ata6.00: qc timeout (cmd 0xec)
[   40.172827] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   40.172829] ata6.00: revalidation failed (errno=-5)
[   40.172833] ata6: hard resetting link
[   40.644868] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   40.668828] ata6.00: configured for UDMA/133
[   40.668848] sd 5:0:0:0: [sde] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   40.668850] sd 5:0:0:0: [sde] tag#10 Sense Key : Illegal Request [current]
[   40.668851] sd 5:0:0:0: [sde] tag#10 Add. Sense: Unaligned write command
[   40.668853] sd 5:0:0:0: [sde] tag#10 CDB: Read(10) 28 00 00 00 04 00 00 00 08 00
[   40.668854] blk_update_request: I/O error, dev sde, sector 1024 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   40.668871] ata6: EH complete
[   40.710953] ata6.00: exception Emask 0x10 SAct 0x2000 SErr 0x10202 action 0xe frozen
[   40.710956] ata6.00: irq_stat 0x00400000, PHY RDY changed
[   40.710960] ata6: SError: { RecovComm Persist PHYRdyChg }
[   40.710963] ata6.00: failed command: READ FPDMA QUEUED
[   40.710972] ata6.00: cmd 60/08:68:00:08:00/00:00:00:00:00/40 tag 13 ncq dma 4096 in
                        res 40/00:6c:00:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   40.710974] ata6.00: status: { DRDY }
[   40.710979] ata6: hard resetting link
[   47.028872] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   52.460810] ata6.00: qc timeout (cmd 0xec)
[   52.460819] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   52.460822] ata6.00: revalidation failed (errno=-5)
[   52.460826] ata6: hard resetting link
[   52.932869] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   52.958011] ata6.00: configured for UDMA/133
[   52.958018] sd 5:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   52.958019] sd 5:0:0:0: [sde] tag#13 Sense Key : Illegal Request [current]
[   52.958021] sd 5:0:0:0: [sde] tag#13 Add. Sense: Unaligned write command
[   52.958022] sd 5:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[   52.958024] blk_update_request: I/O error, dev sde, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   52.958041] ata6: EH complete
[   52.992936] ata6: limiting SATA link speed to 1.5 Gbps
[   52.992942] ata6.00: exception Emask 0x10 SAct 0x608000 SErr 0x10202 action 0xe frozen
[   52.992944] ata6.00: irq_stat 0x00400000, PHY RDY changed
[   52.992948] ata6: SError: { RecovComm Persist PHYRdyChg }
[   52.992952] ata6.00: failed command: READ FPDMA QUEUED
[   52.992960] ata6.00: cmd 60/00:78:00:00:00/01:00:00:00:00/40 tag 15 ncq dma 131072 in
                        res 40/00:b4:3f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   52.992962] ata6.00: status: { DRDY }
[   52.992965] ata6.00: failed command: READ FPDMA QUEUED
[   52.992972] ata6.00: cmd 60/08:a8:00:08:00/00:00:00:00:00/40 tag 21 ncq dma 4096 in
                        res 40/00:b4:3f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   52.992974] ata6.00: status: { DRDY }
[   52.992977] ata6.00: failed command: READ FPDMA QUEUED
[   52.992983] ata6.00: cmd 60/00:b0:3f:00:00/01:00:00:00:00/40 tag 22 ncq dma 131072 in
                        res 40/00:b4:3f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   52.992985] ata6.00: status: { DRDY }
[   52.992990] ata6: hard resetting link
[   59.308871] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   64.748801] ata6.00: qc timeout (cmd 0xec)
[   64.748811] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   64.748813] ata6.00: revalidation failed (errno=-5)
[   64.748817] ata6: hard resetting link
[   65.220869] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   65.246341] ata6.00: configured for UDMA/133
[   65.246361] ata6: EH complete
[   65.270874] ata6.00: exception Emask 0x10 SAct 0x1c SErr 0x10200 action 0xe frozen
[   65.270878] ata6.00: irq_stat 0x00400000, PHY RDY changed
[   65.270881] ata6: SError: { Persist PHYRdyChg }
[   65.270885] ata6.00: failed command: READ FPDMA QUEUED
[   65.270893] ata6.00: cmd 60/00:10:3f:00:00/01:00:00:00:00/40 tag 2 ncq dma 131072 in
                        res 40/00:24:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   65.270895] ata6.00: status: { DRDY }
[   65.270898] ata6.00: failed command: READ FPDMA QUEUED
[   65.270904] ata6.00: cmd 60/08:18:00:08:00/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                        res 40/00:24:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   65.270906] ata6.00: status: { DRDY }
[   65.270909] ata6.00: failed command: READ FPDMA QUEUED
[   65.270916] ata6.00: cmd 60/00:20:00:00:00/01:00:00:00:00/40 tag 4 ncq dma 131072 in
                        res 40/00:24:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   65.270918] ata6.00: status: { DRDY }
[   65.270923] ata6: hard resetting link
[   71.588872] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   77.036794] ata6.00: qc timeout (cmd 0xec)
[   77.036803] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   77.036806] ata6.00: revalidation failed (errno=-5)
[   77.036810] ata6: hard resetting link
[   77.508869] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   77.534540] ata6.00: configured for UDMA/133
[   77.534548] ata6: EH complete
[   77.559875] ata6.00: exception Emask 0x10 SAct 0x80000003 SErr 0x10200 action 0xe frozen
[   77.559878] ata6.00: irq_stat 0x00400000, PHY RDY changed
[   77.559882] ata6: SError: { Persist PHYRdyChg }
[   77.559885] ata6.00: failed command: READ FPDMA QUEUED
[   77.559894] ata6.00: cmd 60/08:00:00:08:00/00:00:00:00:00/40 tag 0 ncq dma 4096 in
                        res 40/00:0c:3f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   77.559896] ata6.00: status: { DRDY }
[   77.559899] ata6.00: failed command: READ FPDMA QUEUED
[   77.559905] ata6.00: cmd 60/00:08:3f:00:00/01:00:00:00:00/40 tag 1 ncq dma 131072 in
                        res 40/00:0c:3f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   77.559907] ata6.00: status: { DRDY }
[   77.559910] ata6.00: failed command: READ FPDMA QUEUED
[   77.559917] ata6.00: cmd 60/00:f8:00:00:00/01:00:00:00:00/40 tag 31 ncq dma 131072 in
                        res 40/00:0c:3f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   77.559919] ata6.00: status: { DRDY }
[   77.559924] ata6: hard resetting link
[   83.856872] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   89.324787] ata6.00: qc timeout (cmd 0xec)
[   89.324796] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   89.324799] ata6.00: revalidation failed (errno=-5)
[   89.324803] ata6: hard resetting link
[   89.796870] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   89.823760] ata6.00: configured for UDMA/133
[   89.823767] ata6: EH complete
[   89.847877] ata6.00: exception Emask 0x10 SAct 0xe00000 SErr 0x10200 action 0xe frozen
[   89.847880] ata6.00: irq_stat 0x00400000, PHY RDY changed
[   89.847884] ata6: SError: { Persist PHYRdyChg }
[   89.847888] ata6.00: failed command: READ FPDMA QUEUED
[   89.847896] ata6.00: cmd 60/00:a8:00:00:00/01:00:00:00:00/40 tag 21 ncq dma 131072 in
                        res 40/00:bc:00:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   89.847898] ata6.00: status: { DRDY }
[   89.847901] ata6.00: failed command: READ FPDMA QUEUED
[   89.847908] ata6.00: cmd 60/00:b0:3f:00:00/01:00:00:00:00/40 tag 22 ncq dma 131072 in
                        res 40/00:bc:00:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   89.847910] ata6.00: status: { DRDY }
[   89.847913] ata6.00: failed command: READ FPDMA QUEUED
[   89.847920] ata6.00: cmd 60/08:b8:00:08:00/00:00:00:00:00/40 tag 23 ncq dma 4096 in
                        res 40/00:bc:00:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[   89.847922] ata6.00: status: { DRDY }
[   89.847926] ata6: hard resetting link
[   96.164873] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  101.612788] ata6.00: qc timeout (cmd 0xec)
[  101.612797] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  101.612800] ata6.00: revalidation failed (errno=-5)
[  101.612804] ata6: hard resetting link
[  102.084871] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  102.111695] ata6.00: configured for UDMA/133
[  102.111703] ata6: EH complete
[  102.136876] ata6.00: limiting speed to UDMA/100:PIO4
[  102.136882] ata6.00: exception Emask 0x10 SAct 0x3800 SErr 0x10200 action 0xe frozen
[  102.136884] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  102.136887] ata6: SError: { Persist PHYRdyChg }
[  102.136891] ata6.00: failed command: READ FPDMA QUEUED
[  102.136899] ata6.00: cmd 60/08:58:00:08:00/00:00:00:00:00/40 tag 11 ncq dma 4096 in
                        res 40/00:6c:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  102.136901] ata6.00: status: { DRDY }
[  102.136904] ata6.00: failed command: READ FPDMA QUEUED
[  102.136912] ata6.00: cmd 60/00:60:3f:00:00/01:00:00:00:00/40 tag 12 ncq dma 131072 in
                        res 40/00:6c:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  102.136914] ata6.00: status: { DRDY }
[  102.136916] ata6.00: failed command: READ FPDMA QUEUED
[  102.136923] ata6.00: cmd 60/00:68:00:00:00/01:00:00:00:00/40 tag 13 ncq dma 131072 in
                        res 40/00:6c:00:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  102.136925] ata6.00: status: { DRDY }
[  102.136930] ata6: hard resetting link
[  108.452874] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  113.900787] ata6.00: qc timeout (cmd 0xec)
[  113.900796] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  113.900799] ata6.00: revalidation failed (errno=-5)
[  113.900803] ata6: hard resetting link
[  114.372872] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  114.399408] ata6.00: configured for UDMA/100
[  114.399416] ata6: EH complete
[  114.423877] ata6.00: exception Emask 0x10 SAct 0xe0 SErr 0x10200 action 0xe frozen
[  114.423880] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  114.423883] ata6: SError: { Persist PHYRdyChg }
[  114.423887] ata6.00: failed command: READ FPDMA QUEUED
[  114.423895] ata6.00: cmd 60/00:28:00:00:00/01:00:00:00:00/40 tag 5 ncq dma 131072 in
                        res 40/00:3c:00:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  114.423898] ata6.00: status: { DRDY }
[  114.423900] ata6.00: failed command: READ FPDMA QUEUED
[  114.423907] ata6.00: cmd 60/00:30:3f:00:00/01:00:00:00:00/40 tag 6 ncq dma 131072 in
                        res 40/00:3c:00:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  114.423909] ata6.00: status: { DRDY }
[  114.423912] ata6.00: failed command: READ FPDMA QUEUED
[  114.423919] ata6.00: cmd 60/08:38:00:08:00/00:00:00:00:00/40 tag 7 ncq dma 4096 in
                        res 40/00:3c:00:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  114.423920] ata6.00: status: { DRDY }
[  114.423925] ata6: hard resetting link
[  120.740874] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  126.188788] ata6.00: qc timeout (cmd 0xec)
[  126.188797] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  126.188800] ata6.00: revalidation failed (errno=-5)
[  126.188804] ata6: hard resetting link
[  126.660871] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  126.687201] ata6.00: configured for UDMA/100
[  126.687209] sd 5:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  126.687211] sd 5:0:0:0: [sde] tag#5 Sense Key : Illegal Request [current]
[  126.687212] sd 5:0:0:0: [sde] tag#5 Add. Sense: Unaligned write command
[  126.687214] sd 5:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 00 00 00 00 00 01 00 00
[  126.687215] blk_update_request: I/O error, dev sde, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[  126.687227] sd 5:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  126.687228] sd 5:0:0:0: [sde] tag#6 Sense Key : Illegal Request [current]
[  126.687230] sd 5:0:0:0: [sde] tag#6 Add. Sense: Unaligned write command
[  126.687231] sd 5:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 00 00 00 3f 00 01 00 00
[  126.687233] blk_update_request: I/O error, dev sde, sector 63 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[  126.687239] sd 5:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  126.687241] sd 5:0:0:0: [sde] tag#7 Sense Key : Illegal Request [current]
[  126.687242] sd 5:0:0:0: [sde] tag#7 Add. Sense: Unaligned write command
[  126.687243] sd 5:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[  126.687245] blk_update_request: I/O error, dev sde, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  126.687246] Buffer I/O error on dev sde, logical block 256, async page read
[  126.687260] ata6: EH complete
[  126.774946] ata6.00: exception Emask 0x10 SAct 0x4000 SErr 0x10200 action 0xe frozen
[  126.774950] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  126.774953] ata6: SError: { Persist PHYRdyChg }
[  126.774958] ata6.00: failed command: READ FPDMA QUEUED
[  126.774966] ata6.00: cmd 60/02:70:3f:4c:38/00:00:3a:00:00/40 tag 14 ncq dma 1024 in
                        res 40/00:74:3f:4c:38/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
[  126.774969] ata6.00: status: { DRDY }
[  126.774974] ata6: hard resetting link
[  133.092875] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  138.476867] ata6.00: qc timeout (cmd 0xec)
[  138.476877] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  138.476880] ata6.00: revalidation failed (errno=-5)
[  138.476884] ata6: hard resetting link
[  138.948871] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  138.974820] ata6.00: configured for UDMA/100
[  138.974829] sd 5:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  138.974831] sd 5:0:0:0: [sde] tag#14 Sense Key : Illegal Request [current]
[  138.974832] sd 5:0:0:0: [sde] tag#14 Add. Sense: Unaligned write command
[  138.974834] sd 5:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 3a 38 4c 3f 00 00 02 00
[  138.974836] blk_update_request: I/O error, dev sde, sector 976768063 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  138.974854] ata6: EH complete
[  139.009858] ata6.00: exception Emask 0x10 SAct 0x1000002 SErr 0x10200 action 0xe frozen
[  139.009859] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  139.009860] ata6: SError: { Persist PHYRdyChg }
[  139.009862] ata6.00: failed command: READ FPDMA QUEUED
[  139.009865] ata6.00: cmd 60/e8:08:4f:00:00/00:00:00:00:00/40 tag 1 ncq dma 118784 in
                        res 40/00:0c:4f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  139.009866] ata6.00: status: { DRDY }
[  139.009867] ata6.00: failed command: READ FPDMA QUEUED
[  139.009869] ata6.00: cmd 60/02:c0:3f:4c:38/00:00:3a:00:00/40 tag 24 ncq dma 1024 in
                        res 40/00:0c:4f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  139.009870] ata6.00: status: { DRDY }
[  139.009872] ata6: hard resetting link
[  145.324874] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  150.764859] ata6.00: qc timeout (cmd 0xec)
[  150.764868] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  150.764871] ata6.00: revalidation failed (errno=-5)
[  150.764875] ata6: hard resetting link
[  151.236872] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  151.262589] ata6.00: configured for UDMA/100
[  151.262597] sd 5:0:0:0: [sde] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  151.262599] sd 5:0:0:0: [sde] tag#1 Sense Key : Illegal Request [current]
[  151.262600] sd 5:0:0:0: [sde] tag#1 Add. Sense: Unaligned write command
[  151.262602] sd 5:0:0:0: [sde] tag#1 CDB: Read(10) 28 00 00 00 00 4f 00 00 e8 00
[  151.262603] blk_update_request: I/O error, dev sde, sector 79 op 0x0:(READ) flags 0x80700 phys_seg 28 prio class 0
[  151.262624] ata6: EH complete
[  151.298858] ata6.00: limiting speed to UDMA/33:PIO4
[  151.298860] ata6.00: exception Emask 0x10 SAct 0xb80 SErr 0x10200 action 0xe frozen
[  151.298861] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  151.298862] ata6: SError: { Persist PHYRdyChg }
[  151.298863] ata6.00: failed command: READ FPDMA QUEUED
[  151.298866] ata6.00: cmd 60/02:38:61:00:00/00:00:00:00:00/40 tag 7 ncq dma 1024 in
                        res 40/00:4c:65:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  151.298867] ata6.00: status: { DRDY }
[  151.298868] ata6.00: failed command: READ FPDMA QUEUED
[  151.298870] ata6.00: cmd 60/02:40:63:00:00/00:00:00:00:00/40 tag 8 ncq dma 1024 in
                        res 40/00:4c:65:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  151.298871] ata6.00: status: { DRDY }
[  151.298871] ata6.00: failed command: READ FPDMA QUEUED
[  151.298874] ata6.00: cmd 60/02:48:65:00:00/00:00:00:00:00/40 tag 9 ncq dma 1024 in
                        res 40/00:4c:65:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  151.298874] ata6.00: status: { DRDY }
[  151.298875] ata6.00: failed command: READ FPDMA QUEUED
[  151.298877] ata6.00: cmd 60/02:58:3f:4c:38/00:00:3a:00:00/40 tag 11 ncq dma 1024 in
                        res 40/00:4c:65:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  151.298878] ata6.00: status: { DRDY }
[  151.298880] ata6: hard resetting link
[  157.568875] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  163.052852] ata6.00: qc timeout (cmd 0xec)
[  163.052861] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  163.052864] ata6.00: revalidation failed (errno=-5)
[  163.052868] ata6: hard resetting link
[  163.524873] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  163.549992] ata6.00: configured for UDMA/33
[  163.549999] ata6: EH complete
[  163.573879] ata6.00: exception Emask 0x10 SAct 0x1e SErr 0x10200 action 0xe frozen
[  163.573882] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  163.573886] ata6: SError: { Persist PHYRdyChg }
[  163.573889] ata6.00: failed command: READ FPDMA QUEUED
[  163.573898] ata6.00: cmd 60/02:08:3f:4c:38/00:00:3a:00:00/40 tag 1 ncq dma 1024 in
                        res 40/00:24:61:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  163.573900] ata6.00: status: { DRDY }
[  163.573903] ata6.00: failed command: READ FPDMA QUEUED
[  163.573910] ata6.00: cmd 60/02:10:65:00:00/00:00:00:00:00/40 tag 2 ncq dma 1024 in
                        res 40/00:24:61:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  163.573912] ata6.00: status: { DRDY }
[  163.573914] ata6.00: failed command: READ FPDMA QUEUED
[  163.573921] ata6.00: cmd 60/02:18:63:00:00/00:00:00:00:00/40 tag 3 ncq dma 1024 in
                        res 40/00:24:61:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  163.573923] ata6.00: status: { DRDY }
[  163.573925] ata6.00: failed command: READ FPDMA QUEUED
[  163.573932] ata6.00: cmd 60/02:20:61:00:00/00:00:00:00:00/40 tag 4 ncq dma 1024 in
                        res 40/00:24:61:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  163.573934] ata6.00: status: { DRDY }
[  163.573939] ata6: hard resetting link
[  169.892876] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  175.340852] ata6.00: qc timeout (cmd 0xec)
[  175.340861] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  175.340864] ata6.00: revalidation failed (errno=-5)
[  175.340868] ata6: hard resetting link
[  175.812873] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  175.838331] ata6.00: configured for UDMA/33
[  175.838338] ata6: EH complete
[  175.874859] ata6.00: exception Emask 0x10 SAct 0x8078000 SErr 0x10200 action 0xe frozen
[  175.874860] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  175.874861] ata6: SError: { Persist PHYRdyChg }
[  175.874863] ata6.00: failed command: READ FPDMA QUEUED
[  175.874866] ata6.00: cmd 60/02:78:6f:00:00/00:00:00:00:00/40 tag 15 ncq dma 1024 in
                        res 40/00:94:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  175.874866] ata6.00: status: { DRDY }
[  175.874867] ata6.00: failed command: READ FPDMA QUEUED
[  175.874870] ata6.00: cmd 60/02:80:71:00:00/00:00:00:00:00/40 tag 16 ncq dma 1024 in
                        res 40/00:94:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  175.874870] ata6.00: status: { DRDY }
[  175.874871] ata6.00: failed command: READ FPDMA QUEUED
[  175.874873] ata6.00: cmd 60/02:88:73:00:00/00:00:00:00:00/40 tag 17 ncq dma 1024 in
                        res 40/00:94:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  175.874874] ata6.00: status: { DRDY }
[  175.874875] ata6.00: failed command: READ FPDMA QUEUED
[  175.874877] ata6.00: cmd 60/02:90:75:00:00/00:00:00:00:00/40 tag 18 ncq dma 1024 in
                        res 40/00:94:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  175.874878] ata6.00: status: { DRDY }
[  175.874879] ata6.00: failed command: READ FPDMA QUEUED
[  175.874881] ata6.00: cmd 60/02:d8:3f:4c:38/00:00:3a:00:00/40 tag 27 ncq dma 1024 in
                        res 40/00:94:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  175.874881] ata6.00: status: { DRDY }
[  175.874883] ata6: hard resetting link
[  182.144876] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  187.628836] ata6.00: qc timeout (cmd 0xec)
[  187.628846] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  187.628848] ata6.00: revalidation failed (errno=-5)
[  187.628852] ata6: hard resetting link
[  188.100899] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  188.125374] ata6.00: configured for UDMA/33
[  188.125382] ata6: EH complete
[  188.148881] ata6.00: exception Emask 0x10 SAct 0x18e000 SErr 0x10200 action 0xe frozen
[  188.148885] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  188.148888] ata6: SError: { Persist PHYRdyChg }
[  188.148892] ata6.00: failed command: READ FPDMA QUEUED
[  188.148900] ata6.00: cmd 60/02:68:3f:4c:38/00:00:3a:00:00/40 tag 13 ncq dma 1024 in
                        res 40/00:a4:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  188.148903] ata6.00: status: { DRDY }
[  188.148906] ata6.00: failed command: READ FPDMA QUEUED
[  188.148912] ata6.00: cmd 60/02:70:75:00:00/00:00:00:00:00/40 tag 14 ncq dma 1024 in
                        res 40/00:a4:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  188.148914] ata6.00: status: { DRDY }
[  188.148917] ata6.00: failed command: READ FPDMA QUEUED
[  188.148923] ata6.00: cmd 60/02:78:73:00:00/00:00:00:00:00/40 tag 15 ncq dma 1024 in
                        res 40/00:a4:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  188.148925] ata6.00: status: { DRDY }
[  188.148928] ata6.00: failed command: READ FPDMA QUEUED
[  188.148934] ata6.00: cmd 60/02:98:71:00:00/00:00:00:00:00/40 tag 19 ncq dma 1024 in
                        res 40/00:a4:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  188.148936] ata6.00: status: { DRDY }
[  188.148939] ata6.00: failed command: READ FPDMA QUEUED
[  188.148945] ata6.00: cmd 60/02:a0:6f:00:00/00:00:00:00:00/40 tag 20 ncq dma 1024 in
                        res 40/00:a4:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  188.148947] ata6.00: status: { DRDY }
[  188.148952] ata6: hard resetting link
[  194.468877] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  199.916829] ata6.00: qc timeout (cmd 0xec)
[  199.916839] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  199.916841] ata6.00: revalidation failed (errno=-5)
[  199.916845] ata6: hard resetting link
[  200.388874] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  200.412830] ata6.00: configured for UDMA/33
[  200.412838] ata6: EH complete
[  200.436883] ata6.00: exception Emask 0x10 SAct 0x1f000 SErr 0x10200 action 0xe frozen
[  200.436886] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  200.436889] ata6: SError: { Persist PHYRdyChg }
[  200.436893] ata6.00: failed command: READ FPDMA QUEUED
[  200.436902] ata6.00: cmd 60/02:60:6f:00:00/00:00:00:00:00/40 tag 12 ncq dma 1024 in
                        res 40/00:84:3f:4c:38/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
[  200.436904] ata6.00: status: { DRDY }
[  200.436907] ata6.00: failed command: READ FPDMA QUEUED
[  200.436914] ata6.00: cmd 60/02:68:71:00:00/00:00:00:00:00/40 tag 13 ncq dma 1024 in
                        res 40/00:84:3f:4c:38/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
[  200.436916] ata6.00: status: { DRDY }
[  200.436918] ata6.00: failed command: READ FPDMA QUEUED
[  200.436925] ata6.00: cmd 60/02:70:73:00:00/00:00:00:00:00/40 tag 14 ncq dma 1024 in
                        res 40/00:84:3f:4c:38/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
[  200.436927] ata6.00: status: { DRDY }
[  200.436929] ata6.00: failed command: READ FPDMA QUEUED
[  200.436936] ata6.00: cmd 60/02:78:75:00:00/00:00:00:00:00/40 tag 15 ncq dma 1024 in
                        res 40/00:84:3f:4c:38/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
[  200.436938] ata6.00: status: { DRDY }
[  200.436940] ata6.00: failed command: READ FPDMA QUEUED
[  200.436947] ata6.00: cmd 60/02:80:3f:4c:38/00:00:3a:00:00/40 tag 16 ncq dma 1024 in
                        res 40/00:84:3f:4c:38/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
[  200.436948] ata6.00: status: { DRDY }
[  200.436953] ata6: hard resetting link
[  206.756877] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  212.204822] ata6.00: qc timeout (cmd 0xec)
[  212.204832] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  212.204834] ata6.00: revalidation failed (errno=-5)
[  212.204838] ata6: hard resetting link
[  212.676878] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  212.700073] ata6.00: configured for UDMA/33
[  212.700084] sd 5:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  212.700085] sd 5:0:0:0: [sde] tag#16 Sense Key : Illegal Request [current]
[  212.700087] sd 5:0:0:0: [sde] tag#16 Add. Sense: Unaligned write command
[  212.700088] sd 5:0:0:0: [sde] tag#16 CDB: Read(10) 28 00 3a 38 4c 3f 00 00 02 00
[  212.700090] blk_update_request: I/O error, dev sde, sector 976768063 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  212.700091] Buffer I/O error on dev sde1, logical block 488384000, async page read
[  212.700107] ata6: EH complete
[  212.723883] ata6.00: exception Emask 0x10 SAct 0x3c SErr 0x10200 action 0xe frozen
[  212.723886] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  212.723890] ata6: SError: { Persist PHYRdyChg }
[  212.723893] ata6.00: failed command: READ FPDMA QUEUED
[  212.723901] ata6.00: cmd 60/02:10:75:00:00/00:00:00:00:00/40 tag 2 ncq dma 1024 in
                        res 40/00:2c:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  212.723904] ata6.00: status: { DRDY }
[  212.723906] ata6.00: failed command: READ FPDMA QUEUED
[  212.723913] ata6.00: cmd 60/02:18:73:00:00/00:00:00:00:00/40 tag 3 ncq dma 1024 in
                        res 40/00:2c:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  212.723915] ata6.00: status: { DRDY }
[  212.723918] ata6.00: failed command: READ FPDMA QUEUED
[  212.723925] ata6.00: cmd 60/02:20:71:00:00/00:00:00:00:00/40 tag 4 ncq dma 1024 in
                        res 40/00:2c:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  212.723927] ata6.00: status: { DRDY }
[  212.723929] ata6.00: failed command: READ FPDMA QUEUED
[  212.723935] ata6.00: cmd 60/02:28:6f:00:00/00:00:00:00:00/40 tag 5 ncq dma 1024 in
                        res 40/00:2c:6f:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  212.723937] ata6.00: status: { DRDY }
[  212.723942] ata6: hard resetting link
[  219.024889] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  224.492815] ata6.00: qc timeout (cmd 0xec)
[  224.492825] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  224.492828] ata6.00: revalidation failed (errno=-5)
[  224.492832] ata6: hard resetting link
[  224.964875] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  224.988100] ata6.00: configured for UDMA/33
[  224.988109] ata6: EH complete
[  225.011883] ata6.00: exception Emask 0x10 SAct 0x80800003 SErr 0x10200 action 0xe frozen
[  225.011886] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  225.011890] ata6: SError: { Persist PHYRdyChg }
[  225.011894] ata6.00: failed command: READ FPDMA QUEUED
[  225.011902] ata6.00: cmd 60/02:00:73:00:00/00:00:00:00:00/40 tag 0 ncq dma 1024 in
                        res 40/00:0c:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  225.011904] ata6.00: status: { DRDY }
[  225.011907] ata6.00: failed command: READ FPDMA QUEUED
[  225.011914] ata6.00: cmd 60/02:08:75:00:00/00:00:00:00:00/40 tag 1 ncq dma 1024 in
                        res 40/00:0c:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  225.011916] ata6.00: status: { DRDY }
[  225.011919] ata6.00: failed command: READ FPDMA QUEUED
[  225.011926] ata6.00: cmd 60/02:b8:6f:00:00/00:00:00:00:00/40 tag 23 ncq dma 1024 in
                        res 40/00:0c:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  225.011927] ata6.00: status: { DRDY }
[  225.011930] ata6.00: failed command: READ FPDMA QUEUED
[  225.011937] ata6.00: cmd 60/02:f8:71:00:00/00:00:00:00:00/40 tag 31 ncq dma 1024 in
                        res 40/00:0c:75:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  225.011939] ata6.00: status: { DRDY }
[  225.011943] ata6: hard resetting link
[  231.332878] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  236.780807] ata6.00: qc timeout (cmd 0xec)
[  236.780816] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  236.780819] ata6.00: revalidation failed (errno=-5)
[  236.780823] ata6: hard resetting link
[  237.252875] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  237.275268] ata6.00: configured for UDMA/33
[  237.275275] ata6: EH complete
[  237.298883] ata6.00: exception Emask 0x10 SAct 0x3c0000 SErr 0x10200 action 0xe frozen
[  237.298887] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  237.298890] ata6: SError: { Persist PHYRdyChg }
[  237.298894] ata6.00: failed command: READ FPDMA QUEUED
[  237.298903] ata6.00: cmd 60/02:90:71:00:00/00:00:00:00:00/40 tag 18 ncq dma 1024 in
                        res 40/00:ac:73:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  237.298905] ata6.00: status: { DRDY }
[  237.298908] ata6.00: failed command: READ FPDMA QUEUED
[  237.298915] ata6.00: cmd 60/02:98:6f:00:00/00:00:00:00:00/40 tag 19 ncq dma 1024 in
                        res 40/00:ac:73:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  237.298917] ata6.00: status: { DRDY }
[  237.298919] ata6.00: failed command: READ FPDMA QUEUED
[  237.298926] ata6.00: cmd 60/02:a0:75:00:00/00:00:00:00:00/40 tag 20 ncq dma 1024 in
                        res 40/00:ac:73:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  237.298928] ata6.00: status: { DRDY }
[  237.298930] ata6.00: failed command: READ FPDMA QUEUED
[  237.298936] ata6.00: cmd 60/02:a8:73:00:00/00:00:00:00:00/40 tag 21 ncq dma 1024 in
                        res 40/00:ac:73:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  237.298938] ata6.00: status: { DRDY }
[  237.298943] ata6: hard resetting link
[  243.620878] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  249.068799] ata6.00: qc timeout (cmd 0xec)
[  249.068809] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  249.068812] ata6.00: revalidation failed (errno=-5)
[  249.068815] ata6: hard resetting link
[  249.540876] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  249.562450] ata6.00: configured for UDMA/33
[  249.562459] sd 5:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  249.562461] sd 5:0:0:0: [sde] tag#18 Sense Key : Illegal Request [current]
[  249.562463] sd 5:0:0:0: [sde] tag#18 Add. Sense: Unaligned write command
[  249.562465] sd 5:0:0:0: [sde] tag#18 CDB: Read(10) 28 00 00 00 00 71 00 00 02 00
[  249.562466] blk_update_request: I/O error, dev sde, sector 113 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  249.562468] Buffer I/O error on dev sde1, logical block 25, async page read
[  249.562475] sd 5:0:0:0: [sde] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  249.562476] sd 5:0:0:0: [sde] tag#19 Sense Key : Illegal Request [current]
[  249.562478] sd 5:0:0:0: [sde] tag#19 Add. Sense: Unaligned write command
[  249.562479] sd 5:0:0:0: [sde] tag#19 CDB: Read(10) 28 00 00 00 00 6f 00 00 02 00
[  249.562480] blk_update_request: I/O error, dev sde, sector 111 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  249.562481] Buffer I/O error on dev sde1, logical block 24, async page read
[  249.562483] sd 5:0:0:0: [sde] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  249.562484] sd 5:0:0:0: [sde] tag#20 Sense Key : Illegal Request [current]
[  249.562485] sd 5:0:0:0: [sde] tag#20 Add. Sense: Unaligned write command
[  249.562487] sd 5:0:0:0: [sde] tag#20 CDB: Read(10) 28 00 00 00 00 75 00 00 02 00
[  249.562488] blk_update_request: I/O error, dev sde, sector 117 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  249.562488] Buffer I/O error on dev sde1, logical block 27, async page read
[  249.562491] sd 5:0:0:0: [sde] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  249.562492] sd 5:0:0:0: [sde] tag#21 Sense Key : Illegal Request [current]
[  249.562493] sd 5:0:0:0: [sde] tag#21 Add. Sense: Unaligned write command
[  249.562494] sd 5:0:0:0: [sde] tag#21 CDB: Read(10) 28 00 00 00 00 73 00 00 02 00
[  249.562495] blk_update_request: I/O error, dev sde, sector 115 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  249.562496] Buffer I/O error on dev sde1, logical block 26, async page read
[  249.562509] ata6: EH complete
[  249.605945] ata6.00: exception Emask 0x10 SAct 0xf SErr 0x10200 action 0xe frozen
[  249.605948] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  249.605952] ata6: SError: { Persist PHYRdyChg }
[  249.605955] ata6.00: failed command: READ FPDMA QUEUED
[  249.605964] ata6.00: cmd 60/02:00:77:00:00/00:00:00:00:00/40 tag 0 ncq dma 1024 in
                        res 40/00:1c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  249.605966] ata6.00: status: { DRDY }
[  249.605969] ata6.00: failed command: READ FPDMA QUEUED
[  249.605975] ata6.00: cmd 60/02:08:79:00:00/00:00:00:00:00/40 tag 1 ncq dma 1024 in
                        res 40/00:1c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  249.605977] ata6.00: status: { DRDY }
[  249.605980] ata6.00: failed command: READ FPDMA QUEUED
[  249.605986] ata6.00: cmd 60/02:10:7b:00:00/00:00:00:00:00/40 tag 2 ncq dma 1024 in
                        res 40/00:1c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  249.605988] ata6.00: status: { DRDY }
[  249.605991] ata6.00: failed command: READ FPDMA QUEUED
[  249.605997] ata6.00: cmd 60/02:18:7d:00:00/00:00:00:00:00/40 tag 3 ncq dma 1024 in
                        res 40/00:1c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  249.605999] ata6.00: status: { DRDY }
[  249.606004] ata6: hard resetting link
[  255.924879] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  261.356793] ata6.00: qc timeout (cmd 0xec)
[  261.356803] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  261.356805] ata6.00: revalidation failed (errno=-5)
[  261.356809] ata6: hard resetting link
[  261.828876] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  261.857659] ata6.00: configured for UDMA/33
[  261.857677] ata6: EH complete
[  261.881884] ata6.00: exception Emask 0x10 SAct 0x7800000 SErr 0x10200 action 0xe frozen
[  261.881887] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  261.881891] ata6: SError: { Persist PHYRdyChg }
[  261.881895] ata6.00: failed command: READ FPDMA QUEUED
[  261.881903] ata6.00: cmd 60/02:b8:7d:00:00/00:00:00:00:00/40 tag 23 ncq dma 1024 in
                        res 40/00:d4:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  261.881905] ata6.00: status: { DRDY }
[  261.881908] ata6.00: failed command: READ FPDMA QUEUED
[  261.881915] ata6.00: cmd 60/02:c0:7b:00:00/00:00:00:00:00/40 tag 24 ncq dma 1024 in
                        res 40/00:d4:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  261.881917] ata6.00: status: { DRDY }
[  261.881919] ata6.00: failed command: READ FPDMA QUEUED
[  261.881926] ata6.00: cmd 60/02:c8:79:00:00/00:00:00:00:00/40 tag 25 ncq dma 1024 in
                        res 40/00:d4:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  261.881928] ata6.00: status: { DRDY }
[  261.881930] ata6.00: failed command: READ FPDMA QUEUED
[  261.881937] ata6.00: cmd 60/02:d0:77:00:00/00:00:00:00:00/40 tag 26 ncq dma 1024 in
                        res 40/00:d4:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  261.881938] ata6.00: status: { DRDY }
[  261.881943] ata6: hard resetting link
[  268.196880] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  273.644794] ata6.00: qc timeout (cmd 0xec)
[  273.644803] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  273.644806] ata6.00: revalidation failed (errno=-5)
[  273.644809] ata6: hard resetting link
[  274.116877] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  274.145456] ata6.00: configured for UDMA/33
[  274.145462] ata6: EH complete
[  274.169885] ata6.00: exception Emask 0x10 SAct 0xf0000 SErr 0x10200 action 0xe frozen
[  274.169888] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  274.169891] ata6: SError: { Persist PHYRdyChg }
[  274.169895] ata6.00: failed command: READ FPDMA QUEUED
[  274.169904] ata6.00: cmd 60/02:80:77:00:00/00:00:00:00:00/40 tag 16 ncq dma 1024 in
                        res 40/00:9c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  274.169906] ata6.00: status: { DRDY }
[  274.169909] ata6.00: failed command: READ FPDMA QUEUED
[  274.169916] ata6.00: cmd 60/02:88:79:00:00/00:00:00:00:00/40 tag 17 ncq dma 1024 in
                        res 40/00:9c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  274.169917] ata6.00: status: { DRDY }
[  274.169920] ata6.00: failed command: READ FPDMA QUEUED
[  274.169927] ata6.00: cmd 60/02:90:7b:00:00/00:00:00:00:00/40 tag 18 ncq dma 1024 in
                        res 40/00:9c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  274.169929] ata6.00: status: { DRDY }
[  274.169931] ata6.00: failed command: READ FPDMA QUEUED
[  274.169937] ata6.00: cmd 60/02:98:7d:00:00/00:00:00:00:00/40 tag 19 ncq dma 1024 in
                        res 40/00:9c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  274.169939] ata6.00: status: { DRDY }
[  274.169944] ata6: hard resetting link
[  280.516880] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  285.932794] ata6.00: qc timeout (cmd 0xec)
[  285.932803] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  285.932806] ata6.00: revalidation failed (errno=-5)
[  285.932810] ata6: hard resetting link
[  286.404878] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  286.433114] ata6.00: configured for UDMA/33
[  286.433121] ata6: EH complete
[  286.456885] ata6.00: exception Emask 0x10 SAct 0x7800 SErr 0x10200 action 0xe frozen
[  286.456888] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  286.456892] ata6: SError: { Persist PHYRdyChg }
[  286.456896] ata6.00: failed command: READ FPDMA QUEUED
[  286.456904] ata6.00: cmd 60/02:58:7d:00:00/00:00:00:00:00/40 tag 11 ncq dma 1024 in
                        res 40/00:74:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  286.456906] ata6.00: status: { DRDY }
[  286.456909] ata6.00: failed command: READ FPDMA QUEUED
[  286.456916] ata6.00: cmd 60/02:60:7b:00:00/00:00:00:00:00/40 tag 12 ncq dma 1024 in
                        res 40/00:74:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  286.456918] ata6.00: status: { DRDY }
[  286.456920] ata6.00: failed command: READ FPDMA QUEUED
[  286.456927] ata6.00: cmd 60/02:68:79:00:00/00:00:00:00:00/40 tag 13 ncq dma 1024 in
                        res 40/00:74:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  286.456929] ata6.00: status: { DRDY }
[  286.456931] ata6.00: failed command: READ FPDMA QUEUED
[  286.456938] ata6.00: cmd 60/02:70:77:00:00/00:00:00:00:00/40 tag 14 ncq dma 1024 in
                        res 40/00:74:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  286.456940] ata6.00: status: { DRDY }
[  286.456944] ata6: hard resetting link
[  292.804880] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  298.220794] ata6.00: qc timeout (cmd 0xec)
[  298.220804] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  298.220806] ata6.00: revalidation failed (errno=-5)
[  298.220810] ata6: hard resetting link
[  298.692878] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  298.720691] ata6.00: configured for UDMA/33
[  298.720709] ata6: EH complete
[  298.743886] ata6.00: exception Emask 0x10 SAct 0xf0 SErr 0x10200 action 0xe frozen
[  298.743889] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  298.743892] ata6: SError: { Persist PHYRdyChg }
[  298.743896] ata6.00: failed command: READ FPDMA QUEUED
[  298.743904] ata6.00: cmd 60/02:20:77:00:00/00:00:00:00:00/40 tag 4 ncq dma 1024 in
                        res 40/00:3c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  298.743907] ata6.00: status: { DRDY }
[  298.743909] ata6.00: failed command: READ FPDMA QUEUED
[  298.743916] ata6.00: cmd 60/02:28:79:00:00/00:00:00:00:00/40 tag 5 ncq dma 1024 in
                        res 40/00:3c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  298.743918] ata6.00: status: { DRDY }
[  298.743920] ata6.00: failed command: READ FPDMA QUEUED
[  298.743927] ata6.00: cmd 60/02:30:7b:00:00/00:00:00:00:00/40 tag 6 ncq dma 1024 in
                        res 40/00:3c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  298.743929] ata6.00: status: { DRDY }
[  298.743931] ata6.00: failed command: READ FPDMA QUEUED
[  298.743938] ata6.00: cmd 60/02:38:7d:00:00/00:00:00:00:00/40 tag 7 ncq dma 1024 in
                        res 40/00:3c:7d:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  298.743940] ata6.00: status: { DRDY }
[  298.743945] ata6: hard resetting link
[  305.092880] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  310.508871] ata6.00: qc timeout (cmd 0xec)
[  310.508881] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  310.508884] ata6.00: revalidation failed (errno=-5)
[  310.508887] ata6: hard resetting link
[  310.980878] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  311.008155] ata6.00: configured for UDMA/33
[  311.008162] ata6: EH complete
[  311.031887] ata6.00: exception Emask 0x10 SAct 0x80000007 SErr 0x10200 action 0xe frozen
[  311.031890] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  311.031893] ata6: SError: { Persist PHYRdyChg }
[  311.031897] ata6.00: failed command: READ FPDMA QUEUED
[  311.031905] ata6.00: cmd 60/02:00:7b:00:00/00:00:00:00:00/40 tag 0 ncq dma 1024 in
                        res 40/00:14:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  311.031907] ata6.00: status: { DRDY }
[  311.031910] ata6.00: failed command: READ FPDMA QUEUED
[  311.031917] ata6.00: cmd 60/02:08:79:00:00/00:00:00:00:00/40 tag 1 ncq dma 1024 in
                        res 40/00:14:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  311.031919] ata6.00: status: { DRDY }
[  311.031921] ata6.00: failed command: READ FPDMA QUEUED
[  311.031928] ata6.00: cmd 60/02:10:77:00:00/00:00:00:00:00/40 tag 2 ncq dma 1024 in
                        res 40/00:14:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  311.031929] ata6.00: status: { DRDY }
[  311.031932] ata6.00: failed command: READ FPDMA QUEUED
[  311.031939] ata6.00: cmd 60/02:f8:7d:00:00/00:00:00:00:00/40 tag 31 ncq dma 1024 in
                        res 40/00:14:77:00:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  311.031941] ata6.00: status: { DRDY }
[  311.031946] ata6: hard resetting link
[  317.348882] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  322.796864] ata6.00: qc timeout (cmd 0xec)
[  322.796874] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  322.796876] ata6.00: revalidation failed (errno=-5)
[  322.796880] ata6: hard resetting link
[  323.268879] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  323.295573] ata6.00: configured for UDMA/33
[  323.295580] sd 5:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  323.295582] sd 5:0:0:0: [sde] tag#0 Sense Key : Illegal Request [current]
[  323.295583] sd 5:0:0:0: [sde] tag#0 Add. Sense: Unaligned write command
[  323.295584] sd 5:0:0:0: [sde] tag#0 CDB: Read(10) 28 00 00 00 00 7b 00 00 02 00
[  323.295586] blk_update_request: I/O error, dev sde, sector 123 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  323.295587] Buffer I/O error on dev sde1, logical block 30, async page read
[  323.295594] sd 5:0:0:0: [sde] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  323.295595] sd 5:0:0:0: [sde] tag#1 Sense Key : Illegal Request [current]
[  323.295596] sd 5:0:0:0: [sde] tag#1 Add. Sense: Unaligned write command
[  323.295597] sd 5:0:0:0: [sde] tag#1 CDB: Read(10) 28 00 00 00 00 79 00 00 02 00
[  323.295598] blk_update_request: I/O error, dev sde, sector 121 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  323.295599] Buffer I/O error on dev sde1, logical block 29, async page read
[  323.295602] sd 5:0:0:0: [sde] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  323.295603] sd 5:0:0:0: [sde] tag#2 Sense Key : Illegal Request [current]
[  323.295604] sd 5:0:0:0: [sde] tag#2 Add. Sense: Unaligned write command
[  323.295605] sd 5:0:0:0: [sde] tag#2 CDB: Read(10) 28 00 00 00 00 77 00 00 02 00
[  323.295606] blk_update_request: I/O error, dev sde, sector 119 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  323.295607] Buffer I/O error on dev sde1, logical block 28, async page read
[  323.295609] sd 5:0:0:0: [sde] tag#31 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  323.295610] sd 5:0:0:0: [sde] tag#31 Sense Key : Illegal Request [current]
[  323.295611] sd 5:0:0:0: [sde] tag#31 Add. Sense: Unaligned write command
[  323.295613] sd 5:0:0:0: [sde] tag#31 CDB: Read(10) 28 00 00 00 00 7d 00 00 02 00
[  323.295614] blk_update_request: I/O error, dev sde, sector 125 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  323.295614] Buffer I/O error on dev sde1, logical block 31, async page read
[  323.295628] ata6: EH complete
[  323.356199] EXT4-fs (sda3): re-mounted. Opts: (null)
[  323.416858] ata6.00: exception Emask 0x10 SAct 0x1000 SErr 0x10200 action 0xe frozen
[  323.416860] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  323.416861] ata6: SError: { Persist PHYRdyChg }
[  323.416863] ata6.00: failed command: READ FPDMA QUEUED
[  323.416866] ata6.00: cmd 60/08:60:3f:01:00/00:00:00:00:00/40 tag 12 ncq dma 4096 in
                        res 40/00:64:3f:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  323.416867] ata6.00: status: { DRDY }
[  323.416870] ata6: hard resetting link
[  323.644869] Adding 33554428k swap on /dev/sda2.  Priority:-2 extents:1 across:33554428k
[  323.680719] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[  323.680876] EXT4-fs (md1): mounting ext3 file system using the ext4 subsystem
[  323.728308] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[  323.913180] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[  323.925314] EXT4-fs (sde1): mounting ext3 file system using the ext4 subsystem
[  329.732882] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  335.084857] ata6.00: qc timeout (cmd 0xec)
[  335.084867] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  335.084870] ata6.00: revalidation failed (errno=-5)
[  335.084874] ata6: hard resetting link
[  335.556879] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  335.583216] ata6.00: configured for UDMA/33
[  335.583225] sd 5:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  335.583228] sd 5:0:0:0: [sde] tag#12 Sense Key : Illegal Request [current]
[  335.583229] sd 5:0:0:0: [sde] tag#12 Add. Sense: Unaligned write command
[  335.583231] sd 5:0:0:0: [sde] tag#12 CDB: Read(10) 28 00 00 00 01 3f 00 00 08 00
[  335.583233] blk_update_request: I/O error, dev sde, sector 319 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  335.583254] ata6: EH complete
[  335.617877] ata6.00: exception Emask 0x10 SAct 0xc000 SErr 0x10200 action 0xe frozen
[  335.617880] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  335.617884] ata6: SError: { Persist PHYRdyChg }
[  335.617888] ata6.00: failed command: READ FPDMA QUEUED
[  335.617897] ata6.00: cmd 60/08:70:3f:01:00/00:00:00:00:00/40 tag 14 ncq dma 4096 in
                        res 40/00:74:3f:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  335.617899] ata6.00: status: { DRDY }
[  335.617902] ata6.00: failed command: READ FPDMA QUEUED
[  335.617909] ata6.00: cmd 60/08:78:3f:00:00/00:00:00:00:00/40 tag 15 ncq dma 4096 in
                        res 40/00:74:3f:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  335.617911] ata6.00: status: { DRDY }
[  335.617916] ata6: hard resetting link
[  341.880883] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  347.372869] ata6.00: qc timeout (cmd 0xec)
[  347.372879] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  347.372882] ata6.00: revalidation failed (errno=-5)
[  347.372886] ata6: hard resetting link
[  347.844880] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  347.870608] ata6.00: configured for UDMA/33
[  347.870616] sd 5:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  347.870617] sd 5:0:0:0: [sde] tag#14 Sense Key : Illegal Request [current]
[  347.870619] sd 5:0:0:0: [sde] tag#14 Add. Sense: Unaligned write command
[  347.870620] sd 5:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 00 00 01 3f 00 00 08 00
[  347.870622] blk_update_request: I/O error, dev sde, sector 319 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  347.870641] ata6: EH complete
[  347.914883] ata6.00: exception Emask 0x10 SAct 0x80010 SErr 0x10200 action 0xe frozen
[  347.914886] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  347.914889] ata6: SError: { Persist PHYRdyChg }
[  347.914893] ata6.00: failed command: READ FPDMA QUEUED
[  347.914902] ata6.00: cmd 60/08:20:57:20:00/01:00:00:00:00/40 tag 4 ncq dma 135168 in
                        res 40/00:24:57:20:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  347.914904] ata6.00: status: { DRDY }
[  347.914907] ata6.00: failed command: READ FPDMA QUEUED
[  347.914914] ata6.00: cmd 60/08:98:3f:01:00/00:00:00:00:00/40 tag 19 ncq dma 4096 in
                        res 40/00:24:57:20:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  347.914916] ata6.00: status: { DRDY }
[  347.914921] ata6: hard resetting link
[  354.184883] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  359.660871] ata6.00: qc timeout (cmd 0xec)
[  359.660880] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  359.660883] ata6.00: revalidation failed (errno=-5)
[  359.660887] ata6: hard resetting link
[  360.132881] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  360.158178] ata6.00: configured for UDMA/33
[  360.158187] sd 5:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  360.158189] sd 5:0:0:0: [sde] tag#4 Sense Key : Illegal Request [current]
[  360.158191] sd 5:0:0:0: [sde] tag#4 Add. Sense: Unaligned write command
[  360.158192] sd 5:0:0:0: [sde] tag#4 CDB: Read(10) 28 00 00 00 20 57 00 01 08 00
[  360.158194] blk_update_request: I/O error, dev sde, sector 8279 op 0x0:(READ) flags 0x80000 phys_seg 33 prio class 0
[  360.158206] EXT4-fs error (device sde1): __ext4_get_inode_loc:4698: inode #8: block 1027: comm mount: unable to read itable block
[  360.158208] ata6: EH complete
[  360.182949] ata6.00: exception Emask 0x10 SAct 0x40 SErr 0x10200 action 0xe frozen
[  360.182952] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  360.182956] ata6: SError: { Persist PHYRdyChg }
[  360.182960] ata6.00: failed command: READ FPDMA QUEUED
[  360.182968] ata6.00: cmd 60/08:30:3f:01:00/00:00:00:00:00/40 tag 6 ncq dma 4096 in
                        res 40/00:34:3f:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  360.182970] ata6.00: status: { DRDY }
[  360.182975] ata6: hard resetting link
[  366.500884] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  371.948871] ata6.00: qc timeout (cmd 0xec)
[  371.948881] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  371.948883] ata6.00: revalidation failed (errno=-5)
[  371.948887] ata6: hard resetting link
[  372.420881] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  372.445147] ata6.00: configured for UDMA/33
[  372.445153] ata6: EH complete
[  372.445330] EXT4-fs (sde1): no journal found
[  372.474831] ata6.00: exception Emask 0x10 SAct 0x8000000 SErr 0x10200 action 0xe frozen
[  372.474832] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  372.474835] ata6: SError: { Persist PHYRdyChg }
[  372.474838] ata6.00: failed command: READ FPDMA QUEUED
[  372.474842] ata6.00: cmd 60/08:d8:3f:01:00/00:00:00:00:00/40 tag 27 ncq dma 4096 in
                        res 40/00:dc:3f:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  372.474844] ata6.00: status: { DRDY }
[  372.474847] ata6: hard resetting link
[  378.752892] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  380.031720] ip (3298) used greatest stack depth: 12488 bytes left
[  381.560810] RTL8211E Gigabit Ethernet r8169-800:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[  381.713781] ip (3760) used greatest stack depth: 10680 bytes left
[  381.714182] r8169 0000:08:00.0 eth0: Link is Down
[  384.236884] ata6.00: qc timeout (cmd 0xec)
[  384.236894] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  384.236897] ata6.00: revalidation failed (errno=-5)
[  384.236902] ata6: hard resetting link
[  384.708897] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  384.731917] ata6.00: configured for UDMA/33
[  384.731937] ata6: EH complete
[  384.755879] ata6.00: exception Emask 0x10 SAct 0x100 SErr 0x10200 action 0xe frozen
[  384.755883] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  384.755886] ata6: SError: { Persist PHYRdyChg }
[  384.755890] ata6.00: failed command: READ FPDMA QUEUED
[  384.755899] ata6.00: cmd 60/08:40:3f:01:00/00:00:00:00:00/40 tag 8 ncq dma 4096 in
                        res 40/00:44:3f:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  384.755901] ata6.00: status: { DRDY }
[  384.755906] ata6: hard resetting link
[  384.768374] r8169 0000:08:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  384.768380] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  390.657094] device eth0 entered promiscuous mode
[  391.084885] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  396.524871] ata6.00: qc timeout (cmd 0xec)
[  396.524881] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  396.524884] ata6.00: revalidation failed (errno=-5)
[  396.524889] ata6: hard resetting link
[  396.996882] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  397.026582] ata6.00: configured for UDMA/33
[  397.026590] ata6: EH complete
[  397.050952] ata6.00: exception Emask 0x10 SAct 0x200 SErr 0x10200 action 0xe frozen
[  397.050955] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  397.050959] ata6: SError: { Persist PHYRdyChg }
[  397.050963] ata6.00: failed command: READ FPDMA QUEUED
[  397.050972] ata6.00: cmd 60/08:48:3f:01:00/00:00:00:00:00/40 tag 9 ncq dma 4096 in
                        res 40/00:4c:3f:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  397.050974] ata6.00: status: { DRDY }
[  397.050979] ata6: hard resetting link
[  403.372885] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  408.812878] ata6.00: qc timeout (cmd 0xec)
[  408.812888] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  408.812891] ata6.00: revalidation failed (errno=-5)
[  408.812895] ata6: hard resetting link
[  409.284882] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  409.312614] ata6.00: configured for UDMA/33
[  409.312621] ata6: EH complete
[  409.336957] ata6.00: exception Emask 0x10 SAct 0x20000 SErr 0x10200 action 0xe frozen
[  409.336960] ata6.00: irq_stat 0x00400000, PHY RDY changed
[  409.336964] ata6: SError: { Persist PHYRdyChg }
[  409.336968] ata6.00: failed command: READ FPDMA QUEUED
[  409.336977] ata6.00: cmd 60/08:88:3f:01:00/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                        res 40/00:8c:3f:01:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[  409.336979] ata6.00: status: { DRDY }
[  409.336984] ata6: hard resetting link
[  415.652887] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  421.100851] ata6.00: qc timeout (cmd 0xec)
[  421.100861] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[  421.100865] ata6.00: revalidation failed (errno=-5)
[  421.100870] ata6: hard resetting link
[  421.572884] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  421.599668] ata6.00: configured for UDMA/33
[  421.599678] sd 5:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  421.599680] sd 5:0:0:0: [sde] tag#17 Sense Key : Illegal Request [current]
[  421.599682] sd 5:0:0:0: [sde] tag#17 Add. Sense: Unaligned write command
[  421.599684] sd 5:0:0:0: [sde] tag#17 CDB: Read(10) 28 00 00 00 01 3f 00 00 08 00
[  421.599686] blk_update_request: I/O error, dev sde, sector 319 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  421.599687] Buffer I/O error on dev sde1, logical block 32, async page read
[  421.599708] ata6: EH complete