Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.39-gentoo-r2 (root@oplite) (gcc version 4.5.2 (Gentoo 4.5.2 p1.1, pie-0.4.5) ) #1 SMP PREEMPT Tue Jun 28 23:37:16 CEST 2011
Command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-2.6.39-gentoo-r2 real_root=UUID=ed77a3b0-f3e6-4c97-b451-a9e2852d6f8c root=/dev/ram0 rootfstype=ext3 init=/linuxrc rootfstype=ext3 nouveau.modeset=1 "acpi_osi=!Windows 2006i8042.reset" i8042.nomux i8042.nopnp i8042.noloop acpi_backlight=vendor ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000094000 (usable)
 BIOS-e820: 0000000000094000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000009f63f000 (usable)
 BIOS-e820: 000000009f63f000 - 000000009f6bf000 (reserved)
 BIOS-e820: 000000009f6bf000 - 000000009f7bf000 (ACPI NVS)
 BIOS-e820: 000000009f7bf000 - 000000009f7ff000 (ACPI data)
 BIOS-e820: 000000009f7ff000 - 000000009f800000 (usable)
 BIOS-e820: 000000009f800000 - 00000000a0000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Sony Corporation VPCZ13M9E/VAIO, BIOS R3030C3 07/30/2010
e820 update range: 0000000000000000 - 0000000000020000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x158000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 0FFE00000 mask FFFE00000 write-protect
  2 base 080000000 mask FE0000000 write-back
  3 base 09F800000 mask FFF800000 uncachable
  4 base 100000000 mask F80000000 write-back
  5 base 160000000 mask FE0000000 uncachable
  6 base 158000000 mask FF8000000 uncachable
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x9f800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000008f000] 8f000 size 20480
init_memory_mapping: 0000000000000000-000000009f800000
 0000000000 - 009f800000 page 2M
kernel direct mapping tables up to 9f800000 @ 9f63b000-9f63f000
init_memory_mapping: 0000000100000000-0000000158000000
 0100000000 - 0158000000 page 2M
kernel direct mapping tables up to 158000000 @ 157ff9000-158000000
RAMDISK: 36b50000 - 375a0000
ACPI: RSDP 00000000000fe020 00024 (v02   Sony)
ACPI: XSDT 000000009f7fe120 0007C (v01   Sony     VAIO 20100730      01000013)
ACPI: FACP 000000009f7fb000 000F4 (v04   Sony     VAIO 20100730 MSFT 01000013)
ACPI: DSDT 000000009f7ec000 0B0CD (v02   Sony     VAIO 20100730 MSFT 01000013)
ACPI: FACS 000000009f75f000 00040
ACPI: TCPA 000000009f7fd000 00032 (v00                 00000000      00000000)
ACPI: ASF! 000000009f7fc000 000A5 (v32   Sony     VAIO 20100730 MSFT 01000013)
ACPI: HPET 000000009f7fa000 00038 (v01   Sony     VAIO 20100730 MSFT 01000013)
ACPI: APIC 000000009f7f9000 0008C (v02   Sony     VAIO 20100730 MSFT 01000013)
ACPI: MCFG 000000009f7f8000 0003C (v01   Sony     VAIO 20100730 MSFT 01000013)
ACPI: SLIC 000000009f7eb000 00176 (v01   Sony     VAIO 20100730 MSFT 01000013)
ACPI: BOOT 000000009f7ea000 00028 (v01   Sony     VAIO 20100730 MSFT 01000013)
ACPI: SSDT 000000009f7e8000 001B4 (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: ASPT 000000009f7e5000 00034 (v04   Sony     VAIO 20100730 MSFT 01000013)
ACPI: SSDT 000000009f7e4000 009F1 (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880148200000-ffff88014b9fffff] on node 0
Zone PFN ranges:
  DMA      0x00000020 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00158000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000020 -> 0x00000094
    0: 0x00000100 -> 0x0009f63f
    0: 0x0009f7ff -> 0x0009f800
    0: 0x00100000 -> 0x00158000
On node 0 totalpages: 1013172
  DMA zone: 56 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3895 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 634488 pages, LIFO batch:31
  Normal zone: 4928 pages used for memmap
  Normal zone: 355520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
8 Processors exceeds NR_CPUS limit of 4
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000009f63f000 - 000000009f6bf000
PM: Registered nosave memory: 000000009f6bf000 - 000000009f7bf000
PM: Registered nosave memory: 000000009f7bf000 - 000000009f7ff000
PM: Registered nosave memory: 000000009f800000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at a0000000 (gap: a0000000:50000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880157c00000 s76864 r8192 d21440 u524288
pcpu-alloc: s76864 r8192 d21440 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 993903
Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-2.6.39-gentoo-r2 real_root=UUID=ed77a3b0-f3e6-4c97-b451-a9e2852d6f8c root=/dev/ram0 rootfstype=ext3 init=/linuxrc rootfstype=ext3 nouveau.modeset=1 "acpi_osi=!Windows 2006i8042.reset" i8042.nomux i8042.nopnp i8042.noloop acpi_backlight=vendor ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Memory: 3897468k/5636096k available (8933k kernel code, 1583408k absent, 155220k reserved, 3794k data, 600k init)
Preemptable hierarchical RCU implementation.
        CONFIG_RCU_FANOUT set to non-default value of 32
NR_IRQS:384
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.764 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.52 BogoMIPS (lpj=25267640)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20110316
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz stepping 05
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 8f000
CPU1: Thermal monitoring handled by SMI
 #2
smpboot cpu 2: start_ip = 8f000
CPU2: Thermal monitoring handled by SMI
 #3 Ok.
smpboot cpu 3: start_ip = 8f000
CPU3: Thermal monitoring handled by SMI
Brought up 4 CPUs
Total of 4 processors activated (20214.43 BogoMIPS).
PM: Registering ACPI NVS region at 9f6bf000 (1048576 bytes)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009f690918 00424 (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00424 (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: SSDT 000000009f68e618 005CD (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 005CD (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: SSDT 000000009f68fa98 00303 (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00303 (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: SSDT 000000009f68dd98 00119 (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00119 (v01   Sony     VAIO 20100730 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [MGPR] (on)
ACPI: Power Resource [DGPR] (on)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xb9128100-0xb912810f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: [8086:10eb] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xb9100000-0xb911ffff]
pci 0000:00:19.0: reg 14: [mem 0xb9125000-0xb9125fff]
pci 0000:00:19.0: reg 18: [io  0x7040-0x705f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xb9127c00-0xb9127fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xb9120000-0xb9123fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xb9127800-0xb9127bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3b0b] type 0 class 0x000601
pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104
pci 0000:00:1f.2: reg 10: [io  0x7068-0x706f]
pci 0000:00:1f.2: reg 14: [io  0x707c-0x707f]
pci 0000:00:1f.2: reg 18: [io  0x7060-0x7067]
pci 0000:00:1f.2: reg 1c: [io  0x7078-0x707b]
pci 0000:00:1f.2: reg 20: [io  0x7020-0x703f]
pci 0000:00:1f.2: reg 24: [mem 0xb9127000-0xb91277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xb9128000-0xb91280ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x7000-0x701f]
pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
pci 0000:00:1f.6: reg 10: [mem 0xb9124000-0xb9124fff 64bit]
pci 0000:01:00.0: [10de:0a2b] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xb2000000-0xb2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0x6000-0x607f]
pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xb3000000-0xb3003fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:01.0:   bridge window [mem 0xb2000000-0xb30fffff]
pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:02:00.0: [8086:422c] type 0 class 0x000280
pci 0000:02:00.0: reg 10: [mem 0xb8100000-0xb8101fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0xb8100000-0xb90fffff]
pci 0000:00:1c.0:   bridge window [mem 0xb3100000-0xb40fffff 64bit pref]
pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
pci 0000:03:00.0: reg 10: [mem 0xb7100a00-0xb7100aff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
pci 0000:03:00.1: reg 10: [mem 0xb7100900-0xb71009ff]
pci 0000:03:00.1: supports D1 D2
pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
pci 0000:03:00.4: reg 10: [mem 0xb7100800-0xb71008ff]
pci 0000:03:00.4: supports D1 D2
pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.4: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xb7100000-0xb80fffff]
pci 0000:00:1c.1:   bridge window [mem 0xb4100000-0xb50fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0xb6100000-0xb70fffff]
pci 0000:00:1c.2:   bridge window [mem 0xb5100000-0xb60fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 1f 1f
 pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 0 1d
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
pci_bus 0000:3f: on NUMA node 0
 pci0000:3f: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000094000 - 000000000009ffff
reserve RAM buffer: 000000009f63f000 - 000000009fffffff
reserve RAM buffer: 000000009f800000 - 000000009fffffff
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xa0000000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0081-0x0091]
pnp 00:01: [io  0x0093-0x009f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x002e-0x002f]
pnp 00:05: [io  0x004e-0x004f]
pnp 00:05: [io  0x0061]
pnp 00:05: [io  0x0063]
pnp 00:05: [io  0x0065]
pnp 00:05: [io  0x0067]
pnp 00:05: [io  0x0070]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0092]
pnp 00:05: [io  0x00b2-0x00b3]
pnp 00:05: [io  0x0680-0x069f]
pnp 00:05: [io  0x0800-0x080f]
pnp 00:05: [io  0x0810-0x0813]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0x0400-0x047f]
pnp 00:05: [io  0x0500-0x057f]
pnp 00:05: [io  0x164e-0x164f]
pnp 00:05: [io  0x2000]
pnp 00:05: [io  0x2004]
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0x0810-0x0813] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:05: [io  0x2000] has been reserved
system 00:05: [io  0x2004] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io  0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io  0x0060]
pnp 00:07: [io  0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfed10000-0xfed13fff]
pnp 00:09: [mem 0xfed18000-0xfed18fff]
pnp 00:09: [mem 0xfed19000-0xfed19fff]
pnp 00:09: [mem 0xf0000000-0xf3ffffff]
pnp 00:09: [mem 0xfed20000-0xfed3ffff]
pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
pnp 00:09: [mem 0xfed45000-0xfed8ffff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xb9200000-0xb9200fff]
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xb9200000-0xb9200fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [bus 3f]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:0b: [mem 0xfed40000-0xfed44fff]
pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xb3080000-0xb30fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:01.0:   bridge window [mem 0xb2000000-0xb30fffff]
pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0xb8100000-0xb90fffff]
pci 0000:00:1c.0:   bridge window [mem 0xb3100000-0xb40fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xb7100000-0xb80fffff]
pci 0000:00:1c.1:   bridge window [mem 0xb4100000-0xb50fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0xb6100000-0xb70fffff]
pci 0000:00:1c.2:   bridge window [mem 0xb5100000-0xb60fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb30fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xb8100000-0xb90fffff]
pci_bus 0000:02: resource 2 [mem 0xb3100000-0xb40fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xb7100000-0xb80fffff]
pci_bus 0000:03: resource 2 [mem 0xb4100000-0xb50fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xb6100000-0xb70fffff]
pci_bus 0000:04: resource 2 [mem 0xb5100000-0xb60fffff 64bit pref]
pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0c: resource 7 [mem 0xa0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 10560k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88009b63b000 - ffff88009f63b000
software IO TLB at phys 0x9b63b000 - 0x9f63b000
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1309352586.730:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
DLM (built Jun 28 2011 23:31:34) installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.16)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
NILFS version 2 loaded
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
Btrfs loaded
GFS2 (built Jun 28 2011 23:31:59) installed
msgmni has been set to 7632
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
io scheduler cfq registered
start plist test
end plist test
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
ALI M7101 PMU not found.
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input2
ACPI: Video Device [DGPU] (multi-head: yes  rom: yes  post: no)
ACPI: acpi_idle yielding to intel_idle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [DTS0] (61 C)
[drm] Initialized drm 1.1.0 20060810
[drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
nouveau 0000:01:00.0: power state changed by ACPI to D0
nouveau 0000:01:00.0: power state changed by ACPI to D0
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5580a2)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.16.67.00
[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 048113b6 0f220014
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02002362 00020010
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 08003382 00000010
[drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:01:00.0:   1: 0x00020147: type 0x47 idx 1 tag 0x52
[drm] nouveau 0000:01:00.0:   2: 0x00010261: type 0x61 idx 2 tag 0x51
[drm] nouveau 0000:01:00.0:   3: 0x01000331: type 0x31 idx 3 tag 0x5e
[drm] nouveau 0000:01:00.0:   4: 0x00002430: type 0x30 idx 4 tag 0x08
[drm] nouveau 0000:01:00.0:   5: 0x00000560: type 0x60 idx 5 tag 0xff
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6FAB
[drm] nouveau 0000:01:00.0: 0x726D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0x7271: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 0x741E: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x744B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x834B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x836D
Refined TSC clocksource calibration: 2526.821 MHz.
Switching to clocksource tsc
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x84CF
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8534
[drm] nouveau 0000:01:00.0: 0x6E2B: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:01:00.0: 3 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: memory 135MHz core 135MHz shader 270MHz voltage 800mV
[drm] nouveau 0000:01:00.0: 1: memory 324MHz core 405MHz shader 810MHz voltage 850mV
[drm] nouveau 0000:01:00.0: 3: memory 700MHz core 450MHz shader 990MHz voltage 850mV
[drm] nouveau 0000:01:00.0: c: memory 950MHz core 550MHz shader 200MHz
[TTM] Zone  kernel: Available graphics memory: 1954014 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: allocated 1600x900 fb: 0x40000000, bo ffff880156d24800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 200x112
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
brd: module loaded
loop: module loaded
drbd: initialized. Version: 8.3.10 (api:88/proto:86-96)
drbd: built-in
drbd: registered as block device major 147
drbd: minor_table @ 0xffff8801576c8cc0
i2c-core: driver [isl29003] using legacy suspend method
i2c-core: driver [isl29003] using legacy resume method
i2c-core: driver [tsl2550] using legacy suspend method
i2c-core: driver [tsl2550] using legacy resume method
Loading iSCSI transport class v2.0-870.
alua: device handler registered
iscsi: registered transport (tcp)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
scsi0 : pata_legacy
ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
scsi1 : pata_legacy
ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:be:d8:06:2c
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF
Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
Copyright (c) 2007-2011 Intel Corporation.
Intel(R) Virtual Function Network Driver - version 1.0.8-k0
Copyright (c) 2009 - 2010 Intel Corporation.
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xb9127c00
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xb9127800
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP detection disabled
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 249
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
coretemp coretemp.0: TjMax is 105 C.
coretemp coretemp.2: TjMax is 105 C.
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
cpuidle: using governor ladder
cpuidle: using governor menu
ioatdma: Intel(R) QuickData Technology Driver 4.00
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
intel ips 0000:00:1f.6: thermal reporting for required devices not enabled, aborting
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889: BIOS auto-probing.
hda_codec: ALC889: SKU not ready 0x411111f0
HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 1-1: new high speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.1: new full speed USB device number 3 using ehci_hcd
Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
usb 1-1.2: new high speed USB device number 4 using ehci_hcd
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b7)
input: UVC Camera (05ca:18b7) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
usb 1-1.3: new high speed USB device number 5 using ehci_hcd
usb 1-1.3: config 1 has an invalid interface number: 1 but max is 0
usb 1-1.3: config 1 has no interface number 0
usb 1-1.6: new full speed USB device number 6 using ehci_hcd
ALSA device list:
  #0: HDA Intel at 0xb9120000 irq 42
  #1: HDA NVidia at 0xb3000000 irq 16
IPv4 over IPv4 tunneling driver
GRE over IPv4 demultiplexor driver
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP veno registered
TCP scalable registered
TCP lp registered
TCP yeah registered
TCP illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
NET: Registered protocol family 5
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
NET: Registered protocol family 33
RxRPC: Registered security type 2 'rxkad'
L2TP core driver, V2.0
L2TP IP encapsulation support (L2TPv3)
L2TP netlink interface
L2TP ethernet pseudowire support (L2TPv3)
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
sctp: Hash tables configured (established 65536 bind 65536)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Installing 9P2000 support
NET: Registered protocol family 37
NET: Registered protocol family 36
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 600k freed
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xb9127000 port 0xb9127100 irq 43
ata4: SATA max UDMA/133 abar m2048@0xb9127000 port 0xb9127180 irq 43
ata5: SATA max UDMA/133 abar m2048@0xb9127000 port 0xb9127200 irq 43
ata6: SATA max UDMA/133 abar m2048@0xb9127000 port 0xb9127280 irq 43
ata7: SATA max UDMA/133 abar m2048@0xb9127000 port 0xb9127300 irq 43
ata8: DUMMY
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ATA-8: TOSHIBA THNSNC064GMMJ, CJSA0201, max UDMA/100
ata3.00: 125045424 sectors, multi 16: LBA48
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA THNSNC06 CJSA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
 sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: unexpected _GTF length (8)
ata4.00: ATAPI: MATSHITADVD-RAM UJ892AS, 1.21, max UDMA/100
ata4.00: unexpected _GTF length (8)
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ892AS  1.21 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ATA-8: TOSHIBA THNSNC064GMMJ, CJSA0201, max UDMA/100
ata5.00: 125045424 sectors, multi 16: LBA48
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access     ATA      TOSHIBA THNSNC06 CJSA PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg2 type 0
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
udevd[4061]: starting version 171
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iwlagn 0000:02:00.0: setting latency timer to 64
iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
iwlagn 0000:02:00.0: Device SKU: 0Xb
iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
udevd[4295]: renamed network interface wlan0 to wlan2
sony_laptop: Unknown parameter `speed_stamina'
EXT3-fs (sda1): using internal journal
Adding 4850004k swap on /dev/sda2.  Priority:-1 extents:1 across:4850004k SS
e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan2: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ADDRCONF(NETDEV_UP): virbr2: link is not ready
ADDRCONF(NETDEV_UP): virbr1: link is not ready
ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ata3.00: configured for UDMA/100
ata3: EH complete
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: configured for UDMA/100
ata5: EH complete
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
wlan2: authenticate with 00:15:62:0b:97:30 (try 1)
wlan2: authenticated
wlan2: associate with 00:15:62:0b:97:30 (try 1)
wlan2: RX AssocResp from 00:15:62:0b:97:30 (capab=0x431 status=0 aid=30)
wlan2: associated
ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
ata3.00: configured for UDMA/100
ata3: EH complete
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: configured for UDMA/100
ata5: EH complete
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
:pts/2: [root@oplite] ~ # >