Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Marvell>> editenv x_usbarg_root
- edit: root=/dev/sda1 ubi.mtd=3 rw noinitrd rootdelay=5 rootfstype=ext3
- Marvell>> saveenv
- Saving Environment to NAND...
- Erasing Nand...
- Erasing at 0xe0000 -- 100% complete.
- NAND write: 99% complete.done
- Marvell>> boot
- (Re)start USB...
- USB: Register 10011 NbrPorts 1
- USB EHCI 1.00
- scanning bus for devices... 3 USB Device(s) found
- scanning bus for storage devices... 1 Storage Device(s) found
- Loading file "/boot/uImage" from usb device 0:1 (usbda1)
- 5447343 bytes read
- ## Booting kernel from Legacy Image at 06400000 ...
- Image Name: Linux-5.13.6-kirkwood-tld-1
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 5447279 Bytes = 5.2 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000][ T0] Booting Linux on physical CPU 0x0
- [ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
- [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
- [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000][ T0] OF: fdt: Machine model: Plat'Home OpenBlocksA7
- [ 0.000000][ T0] Memory policy: Data cache writeback
- [ 0.000000][ T0] Zone ranges:
- [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Movable zone start for each node
- [ 0.000000][ T0] Early memory node ranges
- [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 260096
- [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=/dev/sda1 ubi.mtd=3 rw noinitrd rootdelay=5 rootfstype=ext3
- [ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.000000][ T0] Memory: 1020216K/1048576K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 28360K reserved, 0K cma-reserved)
- [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
- [ 0.000000][ T0] trace event string verifier disabled
- [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
- [ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
- [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
- [ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
- [ 0.000050][ T0] Switching to timer-based delay loop, resolution 5ns
- [ 0.000928][ T0] Console: colour dummy device 80x30
- [ 0.000988][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
- [ 0.001022][ T0] pid_max: default: 32768 minimum: 301
- [ 0.001403][ T0] LSM: Security Framework initializing
- [ 0.001557][ T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.001597][ T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.002869][ T0] CPU: Testing write buffer coherency: ok
- [ 0.004440][ T1] Setting up static identity map for 0x100000 - 0x100058
- [ 0.004739][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
- [ 0.004964][ T1] rcu: Hierarchical SRCU implementation.
- [ 0.006328][ T1] devtmpfs: initialized
- [ 0.011803][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.011852][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.056657][ T1] prandom32: self test passed (less than 6 bits correlated)
- [ 0.056690][ T1] prandom: seed boundary self test passed
- [ 0.061749][ T1] prandom: 100 self tests passed
- [ 0.061770][ T1] pinctrl core: initialized pinctrl subsystem
- [ 0.063053][ T1] NET: Registered protocol family 16
- [ 0.063951][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.064838][ T1] audit: initializing netlink subsys (disabled)
- [ 0.065898][ T1] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.066178][ T16] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
- [ 0.066295][ T1] cpuidle: using governor ladder
- [ 0.066355][ T1] cpuidle: using governor menu
- [ 0.066942][ T1] [Firmware Bug]: Feroceon L2: bootloader left the L2 cache on!
- [ 0.066967][ T1] Feroceon L2: Cache support initialised.
- [ 0.079288][ T1] No ATAGs?
- [ 2.560060][ C0] random: fast init done
- [ 5.915775][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
- [ 5.946494][ T59] wait_for_initramfs() called before rootfs_initcalls
- [ 6.140153][ T1] raid6: int32x8 gen() 93 MB/s
- [ 6.310179][ T1] raid6: int32x8 xor() 57 MB/s
- [ 6.480268][ T1] raid6: int32x4 gen() 90 MB/s
- [ 6.650189][ T1] raid6: int32x4 xor() 59 MB/s
- [ 6.820091][ T1] raid6: int32x2 gen() 117 MB/s
- [ 6.990224][ T1] raid6: int32x2 xor() 71 MB/s
- [ 7.160155][ T1] raid6: int32x1 gen() 82 MB/s
- [ 7.330131][ T1] raid6: int32x1 xor() 49 MB/s
- [ 7.330154][ T1] raid6: using algorithm int32x2 gen() 117 MB/s
- [ 7.330171][ T1] raid6: .... xor() 71 MB/s, rmw enabled
- [ 7.330185][ T1] raid6: using intx1 recovery algorithm
- [ 7.330494][ T1] vgaarb: loaded
- [ 7.331159][ T1] SCSI subsystem initialized
- [ 7.331806][ T1] usbcore: registered new interface driver usbfs
- [ 7.331897][ T1] usbcore: registered new interface driver hub
- [ 7.331967][ T1] usbcore: registered new device driver usb
- [ 7.332235][ T1] pps_core: LinuxPPS API ver. 1 registered
- [ 7.332256][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 7.332300][ T1] PTP clock support registered
- [ 7.334599][ T1] clocksource: Switched to clocksource orion_clocksource
- [ 7.455361][ T1] VFS: Disk quotas dquot_6.6.0
- [ 7.455488][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 7.480079][ T1] NET: Registered protocol family 2
- [ 7.480371][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 7.482489][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 7.482576][ T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 7.482731][ T1] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 7.482854][ T1] TCP: Hash tables configured (established 8192 bind 8192)
- [ 7.483205][ T1] MPTCP token hash table entries: 1024 (order: 1, 12288 bytes, linear)
- [ 7.483322][ T1] UDP hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 7.483388][ T1] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 7.483684][ T1] NET: Registered protocol family 1
- [ 7.484577][ T1] RPC: Registered named UNIX socket transport module.
- [ 7.484656][ T1] RPC: Registered udp transport module.
- [ 7.484677][ T1] RPC: Registered tcp transport module.
- [ 7.484692][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 7.484714][ T1] PCI: CLS 0 bytes, default 32
- [ 7.485010][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 9.269306][ T1] Initialise system trusted keyrings
- [ 9.269392][ T1] Key type blacklist registered
- [ 9.269699][ T1] workingset: timestamp_bits=30 max_order=18 bucket_order=0
- [ 9.269865][ T1] zbud: loaded
- [ 9.271620][ T1] NFS: Registering the id_resolver key type
- [ 9.271670][ T1] Key type id_resolver registered
- [ 9.271688][ T1] Key type id_legacy registered
- [ 9.271746][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 9.271776][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 9.271796][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 9.272126][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 9.272688][ T1] fuse: init (API version 7.34)
- [ 9.273185][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
- [ 9.273450][ T1] orangefs_init: module version upstream loaded
- [ 9.273475][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
- [ 9.394864][ T1] xor: measuring software checksum speed
- [ 9.405702][ T1] arm4regs : 918 MB/sec
- [ 9.423470][ T1] 8regs : 556 MB/sec
- [ 9.435724][ T1] 32regs : 810 MB/sec
- [ 9.435747][ T1] xor: using function: arm4regs (918 MB/sec)
- [ 9.435774][ T1] async_tx: api initialized (async)
- [ 9.435798][ T1] Key type asymmetric registered
- [ 9.435815][ T1] Asymmetric key parser 'x509' registered
- [ 9.435889][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 9.435983][ T1] io scheduler bfq registered
- [ 9.675717][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
- [ 9.678499][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
- [ 9.735910][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
- [ 9.738988][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
- [ 9.795912][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
- [ 9.799352][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 9.801027][ T1] printk: console [ttyS0] disabled
- [ 9.801144][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A
- [ 10.643360][ T1] printk: console [ttyS0] enabled
- [ 10.649309][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 26, base_baud = 12500000) is a 16550A
- [ 10.669726][ T1] loop: module loaded
- [ 10.674317][ T1] sata_mv f1080000.sata: slots 32 ports 1
- [ 10.682560][ T1] scsi host0: sata_mv
- [ 10.686843][ T1] ata1: SATA max UDMA/133 irq 34
- [ 10.692785][ T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
- [ 10.699974][ T1] nand: Samsung NAND 1GiB 3,3V 8-bit
- [ 10.705173][ T1] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 10.713938][ T1] Scanning device for bad blocks
- [ 10.813040][ T1] Bad eraseblock 1045 at 0x0000082a0000
- [ 10.870789][ T1] Bad eraseblock 1625 at 0x00000cb20000
- [ 11.015078][ T1] Bad eraseblock 3159 at 0x000018ae0000
- [ 11.025625][ T94] ata1: SATA link down (SStatus 0 SControl F300)
- [ 11.135028][ T1] Bad eraseblock 4359 at 0x0000220e0000
- [ 11.140965][ T1] Bad eraseblock 4365 at 0x0000221a0000
- [ 11.411325][ T1] Bad eraseblock 7305 at 0x000039120000
- [ 11.486784][ T1] Bad eraseblock 8082 at 0x00003f240000
- [ 11.502116][ T1] 6 fixed-partitions partitions found on MTD device orion_nand
- [ 11.509585][ T1] Creating 6 MTD partitions on "orion_nand":
- [ 11.515482][ T1] 0x000000000000-0x0000001c0000 : "uboot"
- [ 11.522978][ T1] 0x0000001c0000-0x000000480000 : "env"
- [ 11.530240][ T1] 0x000000480000-0x0000005e0000 : "test"
- [ 11.537537][ T1] 0x0000005e0000-0x000000b20000 : "conf"
- [ 11.544883][ T1] 0x000000b20000-0x000004860000 : "linux"
- [ 11.552582][ T1] 0x000004860000-0x000010000000 : "user"
- [ 11.561507][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
- [ 11.570141][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- [ 11.581982][ T1] libphy: Fixed MDIO Bus: probed
- [ 11.588659][ T1] libphy: orion_mdio_bus: probed
- [ 11.596938][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
- [ 11.686131][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:e1:75:82:1b:06
- [ 11.776067][ T1] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:e1:75:82:1b:07
- [ 11.785755][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 11.793051][ T1] ehci-pci: EHCI PCI platform driver
- [ 11.798326][ T1] ehci-orion: EHCI orion driver
- [ 11.803290][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
- [ 11.809582][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
- [ 11.818322][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
- [ 11.854641][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
- [ 11.861777][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
- [ 11.870829][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 11.878824][ T1] usb usb1: Product: EHCI Host Controller
- [ 11.884434][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
- [ 11.891896][ T1] usb usb1: SerialNumber: f1050000.ehci
- [ 11.898183][ T1] hub 1-0:1.0: USB hub found
- [ 11.902718][ T1] hub 1-0:1.0: 1 port detected
- [ 11.908360][ T1] usbcore: registered new interface driver usb-storage
- [ 11.915673][ T1] mousedev: PS/2 mouse device common for all mice
- [ 11.923222][ T1] rtc-mv f1010300.rtc: registered as rtc0
- [ 11.928970][ T1] rtc-mv f1010300.rtc: setting system clock to 2022-11-05T00:48:13 UTC (1667609293)
- [ 11.938643][ T1] i2c /dev entries driver
- [ 11.944880][ T1] device-mapper: uevent: version 1.0.3
- [ 11.950552][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
- [ 11.960296][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
- [ 11.967639][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
- [ 11.975029][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
- [ 11.982455][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
- [ 11.989312][ T1] device-mapper: raid: Loading target version 1.15.1
- [ 11.997852][ T1] hid: raw HID events driver (C) Jiri Kosina
- [ 12.004186][ T1] drop_monitor: Initializing network drop monitor service
- [ 12.011815][ T1] NET: Registered protocol family 10
- [ 12.018841][ T1] Segment Routing with IPv6
- [ 12.023238][ T1] RPL Segment Routing with IPv6
- [ 12.028186][ T1] NET: Registered protocol family 17
- [ 12.033636][ T1] Key type dns_resolver registered
- [ 12.039443][ T1] registered taskstats version 1
- [ 12.044277][ T1] Loading compiled-in X.509 certificates
- [ 12.050510][ T1] zswap: loaded using pool lzo/zbud
- [ 12.056093][ T1] Key type ._fscrypt registered
- [ 12.060830][ T1] Key type .fscrypt registered
- [ 12.065566][ T1] Key type fscrypt-provisioning registered
- [ 12.073629][ T1] Key type big_key registered
- [ 12.083031][ T1] Key type encrypted registered
- [ 12.091283][ T1] ubi0: attaching mtd3
- [ 12.102734][ T1] ubi0: scanning is finished
- [ 12.117599][ T1] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 38, need 160
- [ 12.129205][ T1] ubi0: attached mtd3 (name "conf", size 5 MiB)
- [ 12.135424][ T1] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
- [ 12.143041][ T1] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
- [ 12.150519][ T1] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
- [ 12.158069][ T1] ubi0: good PEBs: 42, bad PEBs: 0, corrupted PEBs: 0
- [ 12.164749][ T1] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
- [ 12.172715][ T1] ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 3322921700
- [ 12.182626][ T1] ubi0: available PEBs: 0, total reserved PEBs: 42, PEBs reserved for bad PEB handling: 38
- [ 12.192545][ T111] ubi0: background thread "ubi_bgt0d" started, PID 111
- [ 12.199345][ T102] usb 1-1: new high-speed USB device number 2 using orion-ehci
- [ 12.207390][ T1] Waiting 5 sec before mounting root device...
- [ 12.405096][ T102] usb 1-1: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 0.00
- [ 12.414052][ T102] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 12.422828][ T102] hub 1-1:1.0: USB hub found
- [ 12.427458][ T102] hub 1-1:1.0: 4 ports detected
- [ 12.744635][ T102] usb 1-1.3: new high-speed USB device number 3 using orion-ehci
- [ 12.900959][ T102] usb 1-1.3: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
- [ 12.910096][ T102] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 12.918194][ T102] usb 1-1.3: Product: DataTraveler 2.0
- [ 12.923545][ T102] usb 1-1.3: Manufacturer: Kingston
- [ 12.928655][ T102] usb 1-1.3: SerialNumber: 000
- [ 12.935601][ T102] usb 1-1.3: rejected 1 configuration due to insufficient available bus power
- [ 12.944360][ T102] usb 1-1.3: no configuration chosen from 1 choice
- [ 17.284641][ T1] md: Waiting for all devices to be available before autodetect
- [ 17.292176][ T1] md: If you don't use raid, use raid=noautodetect
- [ 17.298733][ T1] md: Autodetecting RAID arrays.
- [ 17.303555][ T1] md: autorun ...
- [ 17.307095][ T1] md: ... autorun DONE.
- [ 17.311919][ T1] VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6
- [ 17.320073][ T1] Please append a correct "root=" boot option; here are the available partitions:
- [ 17.329283][ T1] 1f00 1792 mtdblock0
- [ 17.329297][ T1] (driver?)
- [ 17.337337][ T1] 1f01 2816 mtdblock1
- [ 17.337350][ T1] (driver?)
- [ 17.345371][ T1] 1f02 1408 mtdblock2
- [ 17.345384][ T1] (driver?)
- [ 17.353352][ T1] 1f03 5376 mtdblock3
- [ 17.353363][ T1] (driver?)
- [ 17.361399][ T1] 1f04 62720 mtdblock4
- [ 17.361412][ T1] (driver?)
- [ 17.369445][ T1] 1f05 188032 mtdblock5
- [ 17.369458][ T1] (driver?)
- [ 17.377461][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
- [ 17.386476][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.13.6-kirkwood-tld-1 #1.0
- [ 17.394443][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree)
- [ 17.401446][ T1] [<8010e0a4>] (unwind_backtrace) from [<8010a8ac>] (show_stack+0x10/0x14)
- [ 17.409959][ T1] [<8010a8ac>] (show_stack) from [<80afddf4>] (panic+0xfc/0x328)
- [ 17.417598][ T1] [<80afddf4>] (panic) from [<81101ad0>] (mount_block_root+0x1e0/0x26c)
- [ 17.425837][ T1] [<81101ad0>] (mount_block_root) from [<81101c4c>] (mount_root+0xf0/0x120)
- [ 17.434425][ T1] [<81101c4c>] (mount_root) from [<81101dc0>] (prepare_namespace+0x144/0x180)
- [ 17.443180][ T1] [<81101dc0>] (prepare_namespace) from [<811015e4>] (kernel_init_freeable+0x1d0/0x234)
- [ 17.452817][ T1] [<811015e4>] (kernel_init_freeable) from [<80b091cc>] (kernel_init+0x8/0x118)
- [ 17.461754][ T1] [<80b091cc>] (kernel_init) from [<80100148>] (ret_from_fork+0x14/0x2c)
- [ 17.470080][ T1] Exception stack(0x814d3fb0 to 0x814d3ff8)
- [ 17.475866][ T1] 3fa0: 00000000 00000000 00000000 00000000
- [ 17.484788][ T1] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 17.493707][ T1] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
- [ 17.501068][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
Add Comment
Please, Sign In to add comment