daily pastebin goal
39%
SHARE
TWEET

dmesg - hibernate & sleep

kaiw Nov 21st, 2012 90 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 3.5.7-gentoo (root@kai-laptop) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #2 SMP Thu Nov 15 10:58:29 GMT 2012
  4. [    0.000000] Command line: BOOT_IMAGE=/kernel-3.5.7-gentoo root=/dev/sda6 ro quiet splash
  5. [    0.000000] e820: BIOS-provided physical RAM map:
  6. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
  7. [    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
  8. [    0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
  9. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff7ffff] usable
  10. [    0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bff8efff] ACPI data
  11. [    0.000000] BIOS-e820: [mem 0x00000000bff8f000-0x00000000bffdffff] ACPI NVS
  12. [    0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
  13. [    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
  14. [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  15. [    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
  16. [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
  17. [    0.000000] NX (Execute Disable) protection: active
  18. [    0.000000] DMI 2.5 present.
  19. [    0.000000] DMI: ASUSTeK Computer Inc.         N51Vf                /N51Vf      , BIOS 202     12/23/2008
  20. [    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
  21. [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  22. [    0.000000] No AGP bridge found
  23. [    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
  24. [    0.000000] MTRR default type: uncachable
  25. [    0.000000] MTRR fixed ranges enabled:
  26. [    0.000000]   00000-9FFFF write-back
  27. [    0.000000]   A0000-BFFFF uncachable
  28. [    0.000000]   C0000-CFFFF write-protect
  29. [    0.000000]   D0000-DFFFF uncachable
  30. [    0.000000]   E0000-EFFFF write-through
  31. [    0.000000]   F0000-FFFFF write-protect
  32. [    0.000000] MTRR variable ranges enabled:
  33. [    0.000000]   0 base 000000000 mask F00000000 write-back
  34. [    0.000000]   1 base 100000000 mask FC0000000 write-back
  35. [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
  36. [    0.000000]   3 disabled
  37. [    0.000000]   4 disabled
  38. [    0.000000]   5 disabled
  39. [    0.000000]   6 disabled
  40. [    0.000000]   7 disabled
  41. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  42. [    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
  43. [    0.000000] e820: last_pfn = 0xbff80 max_arch_pfn = 0x400000000
  44. [    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
  45. [    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
  46. [    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
  47. [    0.000000] init_memory_mapping: [mem 0x00000000-0xbff7ffff]
  48. [    0.000000]  [mem 0x00000000-0xbfdfffff] page 2M
  49. [    0.000000]  [mem 0xbfe00000-0xbff7ffff] page 4k
  50. [    0.000000] kernel direct mapping tables up to 0xbff7ffff @ [mem 0x1f9fc000-0x1fffffff]
  51. [    0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
  52. [    0.000000]  [mem 0x100000000-0x13fffffff] page 2M
  53. [    0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbff7a000-0xbff7ffff]
  54. [    0.000000] ACPI: RSDP 00000000000f9370 00024 (v02 ACPIAM)
  55. [    0.000000] ACPI: XSDT 00000000bff80100 00084 (v01 _ASUS_ Notebook 20081223 MSFT 00000097)
  56. [    0.000000] ACPI: FACP 00000000bff80290 000F4 (v03 122308 FACP1719 20081223 MSFT 00000097)
  57. [    0.000000] ACPI: DSDT 00000000bff80680 0C002 (v01  N51V0 N51V0202 00000202 INTL 20051117)
  58. [    0.000000] ACPI: FACS 00000000bff8f000 00040
  59. [    0.000000] ACPI: APIC 00000000bff80390 0005C (v01 122308 APIC1719 20081223 MSFT 00000097)
  60. [    0.000000] ACPI: MCFG 00000000bff80430 0003C (v01 122308 OEMMCFG  20081223 MSFT 00000097)
  61. [    0.000000] ACPI: SLIC 00000000bff80470 00176 (v01 _ASUS_ Notebook 20081223 MSFT 00000097)
  62. [    0.000000] ACPI: ECDT 00000000bff80620 00054 (v01 122308 OEMECDT  20081223 MSFT 00000097)
  63. [    0.000000] ACPI: DBGP 00000000bff803f0 00034 (v01 122308 DBGP1719 20081223 MSFT 00000097)
  64. [    0.000000] ACPI: BOOT 00000000bff805f0 00028 (v01 122308 BOOT1719 20081223 MSFT 00000097)
  65. [    0.000000] ACPI: OEMB 00000000bff8f040 00071 (v01 122308 OEMB1719 20081223 MSFT 00000097)
  66. [    0.000000] ACPI: HPET 00000000bff8c690 00038 (v01 122308 OEMHPET  20081223 MSFT 00000097)
  67. [    0.000000] ACPI: DMAR 00000000bff8f0c0 00108 (v01 122308 DMAR1719 20081223 MSFT 00000097)
  68. [    0.000000] ACPI: ATKG 00000000bff8f3d0 08024 (v01 022008  OEMATKG 20080220 MSFT 00000097)
  69. [    0.000000] ACPI: SSDT 00000000bff97f20 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
  70. [    0.000000] ACPI: Local APIC address 0xfee00000
  71. [    0.000000] No NUMA configuration found
  72. [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
  73. [    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
  74. [    0.000000]   NODE_DATA [mem 0x13fffc000-0x13fffffff]
  75. [    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
  76. [    0.000000] Zone ranges:
  77. [    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
  78. [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
  79. [    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
  80. [    0.000000] Movable zone start for each node
  81. [    0.000000] Early memory node ranges
  82. [    0.000000]   node   0: [mem 0x00010000-0x0009dfff]
  83. [    0.000000]   node   0: [mem 0x00100000-0xbff7ffff]
  84. [    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
  85. [    0.000000] On node 0 totalpages: 1048334
  86. [    0.000000]   DMA zone: 64 pages used for memmap
  87. [    0.000000]   DMA zone: 6 pages reserved
  88. [    0.000000]   DMA zone: 3912 pages, LIFO batch:0
  89. [    0.000000]   DMA32 zone: 16320 pages used for memmap
  90. [    0.000000]   DMA32 zone: 765888 pages, LIFO batch:31
  91. [    0.000000]   Normal zone: 4096 pages used for memmap
  92. [    0.000000]   Normal zone: 258048 pages, LIFO batch:31
  93. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  94. [    0.000000] ACPI: Local APIC address 0xfee00000
  95. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  96. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  97. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  98. [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  99. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  100. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  101. [    0.000000] ACPI: IRQ0 used by override.
  102. [    0.000000] ACPI: IRQ2 used by override.
  103. [    0.000000] ACPI: IRQ9 used by override.
  104. [    0.000000] Using ACPI (MADT) for SMP configuration information
  105. [    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
  106. [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
  107. [    0.000000] nr_irqs_gsi: 40
  108. [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
  109. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  110. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
  111. [    0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
  112. [    0.000000] PM: Registered nosave memory: 00000000bff80000 - 00000000bff8f000
  113. [    0.000000] PM: Registered nosave memory: 00000000bff8f000 - 00000000bffe0000
  114. [    0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
  115. [    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fed20000
  116. [    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000
  117. [    0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000
  118. [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
  119. [    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
  120. [    0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
  121. [    0.000000] e820: [mem 0xc0000000-0xfed1ffff] available for PCI devices
  122. [    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
  123. [    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88013fc00000 s77632 r8192 d20672 u1048576
  124. [    0.000000] pcpu-alloc: s77632 r8192 d20672 u1048576 alloc=1*2097152
  125. [    0.000000] pcpu-alloc: [0] 0 1
  126. [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027848
  127. [    0.000000] Policy zone: Normal
  128. [    0.000000] Kernel command line: BOOT_IMAGE=/kernel-3.5.7-gentoo root=/dev/sda6 ro quiet splash
  129. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  130. [    0.000000] __ex_table already sorted, skipping sort
  131. [    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
  132. [    0.000000] Checking aperture...
  133. [    0.000000] No AGP bridge found
  134. [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
  135. [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  136. [    0.000000] Memory: 4046824k/5242880k available (7164k kernel code, 1049544k absent, 146512k reserved, 5803k data, 592k init)
  137. [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  138. [    0.000000] Hierarchical RCU implementation.
  139. [    0.000000] NR_IRQS:4352 nr_irqs:512 16
  140. [    0.000000] Extended CMOS year: 2000
  141. [    0.000000] Console: colour dummy device 80x25
  142. [    0.000000] console [tty0] enabled
  143. [    0.000000] hpet clockevent registered
  144. [    0.000000] Fast TSC calibration using PIT
  145. [    0.000000] Detected 2394.184 MHz processor.
  146. [    0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.36 BogoMIPS (lpj=2394184)
  147. [    0.001006] pid_max: default: 32768 minimum: 301
  148. [    0.001026] Security Framework initialized
  149. [    0.001030] SELinux:  Initializing.
  150. [    0.001037] SELinux:  Starting in permissive mode
  151. [    0.001315] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  152. [    0.003768] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  153. [    0.004718] Mount-cache hash table entries: 256
  154. [    0.004933] Initializing cgroup subsys cpuacct
  155. [    0.004936] Initializing cgroup subsys freezer
  156. [    0.004961] CPU: Physical Processor ID: 0
  157. [    0.004962] CPU: Processor Core ID: 0
  158. [    0.004964] mce: CPU supports 6 MCE banks
  159. [    0.004970] CPU0: Thermal monitoring handled by SMI
  160. [    0.004974] using mwait in idle threads.
  161. [    0.005039] ACPI: Core revision 20120320
  162. [    0.011443] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  163. [    0.021450] CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
  164. [    0.021998] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
  165. [    0.021998] APIC delta adjusted to PM-Timer: 1662746 (1995274)
  166. [    0.021998] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
  167. [    0.021998] ... version:                2
  168. [    0.021998] ... bit width:              40
  169. [    0.021998] ... generic registers:      2
  170. [    0.021998] ... value mask:             000000ffffffffff
  171. [    0.021998] ... max period:             000000007fffffff
  172. [    0.021998] ... fixed-purpose events:   3
  173. [    0.021998] ... event mask:             0000000700000003
  174. [    0.021998] Booting Node   0, Processors  #1 Ok.
  175. [    0.001999] CPU1: Thermal monitoring handled by SMI
  176. [    0.033010] Brought up 2 CPUs
  177. [    0.033014] Total of 2 processors activated (9576.73 BogoMIPS).
  178. [    0.035176] PM: Registering ACPI NVS region [mem 0xbff8f000-0xbffdffff] (331776 bytes)
  179. [    0.035176] RTC time: 10:32:54, date: 11/21/12
  180. [    0.035176] NET: Registered protocol family 16
  181. [    0.035176] kworker/u:0 (14) used greatest stack depth: 6416 bytes left
  182. [    0.035176] kworker/u:0 (21) used greatest stack depth: 5808 bytes left
  183. [    0.035176] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  184. [    0.035176] ACPI: bus type pci registered
  185. [    0.035176] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  186. [    0.035176] PCI: not using MMCONFIG
  187. [    0.035176] PCI: Using configuration type 1 for base access
  188. [    0.035176] kworker/u:0 (27) used greatest stack depth: 5440 bytes left
  189. [    0.043027] bio: create slab <bio-0> at 0
  190. [    0.043034] ACPI: Added _OSI(Module Device)
  191. [    0.043034] ACPI: Added _OSI(Processor Device)
  192. [    0.043034] ACPI: Added _OSI(3.0 _SCP Extensions)
  193. [    0.043034] ACPI: Added _OSI(Processor Aggregator Device)
  194. [    0.044847] ACPI: EC: EC description table is found, configuring boot EC
  195. [    0.044852] ACPI: EC: Look up EC in DSDT
  196. [    0.046529] ACPI: Executed 1 blocks of module-level executable AML code
  197. [    0.048449] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  198. [    0.049093] ACPI Warning: Incorrect checksum in table [ATKG] - 0x30, should be 0xE5 (20120320/tbutils-323)
  199. [    0.049275] ACPI: SSDT 00000000bff974d0 00248 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
  200. [    0.050155] ACPI: Dynamic OEM Table Load:
  201. [    0.050158] ACPI: SSDT           (null) 00248 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
  202. [    0.050274] ACPI: SSDT 00000000bff977b0 00765 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
  203. [    0.050628] ACPI: Dynamic OEM Table Load:
  204. [    0.050631] ACPI: SSDT           (null) 00765 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
  205. [    0.050799] ACPI: SSDT 00000000bff97400 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
  206. [    0.051164] ACPI: Dynamic OEM Table Load:
  207. [    0.051167] ACPI: SSDT           (null) 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
  208. [    0.051239] ACPI: SSDT 00000000bff97720 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
  209. [    0.051594] ACPI: Dynamic OEM Table Load:
  210. [    0.051597] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
  211. [    0.051790] ACPI: Interpreter enabled
  212. [    0.051795] ACPI: (supports S0 S3 S4 S5)
  213. [    0.051814] ACPI: Using IOAPIC for interrupt routing
  214. [    0.051838] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  215. [    0.052844] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  216. [    0.083117] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
  217. [    0.083200] ACPI: No dock devices found.
  218. [    0.083204] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  219. [    0.083413] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  220. [    0.083533] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
  221. [    0.083535] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
  222. [    0.083537] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
  223. [    0.083539] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
  224. [    0.083541] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
  225. [    0.083577] PCI host bridge to bus 0000:00
  226. [    0.083577] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
  227. [    0.083577] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
  228. [    0.083577] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  229. [    0.083577] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
  230. [    0.083577] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
  231. [    0.083577] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
  232. [    0.083577] DMAR: Forcing write-buffer flush capability
  233. [    0.083577] DMAR: Disabling IOMMU for graphics on this chipset
  234. [    0.083577] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
  235. [    0.083577] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  236. [    0.084035] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
  237. [    0.084096] pci 0000:00:1a.0: reg 20: [io  0xbc00-0xbc1f]
  238. [    0.084168] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
  239. [    0.084228] pci 0000:00:1a.1: reg 20: [io  0xb880-0xb89f]
  240. [    0.084300] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
  241. [    0.084360] pci 0000:00:1a.2: reg 20: [io  0xb800-0xb81f]
  242. [    0.084445] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
  243. [    0.084472] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
  244. [    0.084589] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
  245. [    0.084624] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
  246. [    0.084646] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
  247. [    0.084749] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  248. [    0.084777] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
  249. [    0.084883] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  250. [    0.084915] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
  251. [    0.085031] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  252. [    0.085063] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
  253. [    0.085170] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  254. [    0.085202] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
  255. [    0.085310] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  256. [    0.085341] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
  257. [    0.085448] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
  258. [    0.085480] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
  259. [    0.085587] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  260. [    0.085621] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
  261. [    0.085681] pci 0000:00:1d.0: reg 20: [io  0xb480-0xb49f]
  262. [    0.085753] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
  263. [    0.085813] pci 0000:00:1d.1: reg 20: [io  0xb400-0xb41f]
  264. [    0.085887] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
  265. [    0.085947] pci 0000:00:1d.2: reg 20: [io  0xb080-0xb09f]
  266. [    0.086036] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
  267. [    0.086063] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
  268. [    0.086179] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  269. [    0.086207] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
  270. [    0.086300] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
  271. [    0.086458] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
  272. [    0.086487] pci 0000:00:1f.2: reg 10: [io  0xb000-0xb007]
  273. [    0.086498] pci 0000:00:1f.2: reg 14: [io  0xac00-0xac03]
  274. [    0.086510] pci 0000:00:1f.2: reg 18: [io  0xa880-0xa887]
  275. [    0.086521] pci 0000:00:1f.2: reg 1c: [io  0xa800-0xa803]
  276. [    0.086533] pci 0000:00:1f.2: reg 20: [io  0xa480-0xa49f]
  277. [    0.086544] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
  278. [    0.086615] pci 0000:00:1f.2: PME# supported from D3hot
  279. [    0.086683] pci 0000:01:00.0: [10de:0652] type 00 class 0x030000
  280. [    0.086698] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
  281. [    0.086714] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
  282. [    0.086730] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
  283. [    0.086741] pci 0000:01:00.0: reg 24: [io  0xcc00-0xcc7f]
  284. [    0.086752] pci 0000:01:00.0: reg 30: [mem 0xfde80000-0xfdefffff pref]
  285. [    0.086850] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  286. [    0.086853] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
  287. [    0.086856] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdefffff]
  288. [    0.086860] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  289. [    0.086919] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  290. [    0.087076] pci 0000:03:00.0: [8086:4232] type 00 class 0x028000
  291. [    0.087136] pci 0000:03:00.0: reg 10: [mem 0xfdffe000-0xfdffffff 64bit]
  292. [    0.087360] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
  293. [    0.089047] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  294. [    0.089055] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
  295. [    0.089120] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
  296. [    0.089125] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
  297. [    0.089130] pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfe9fffff]
  298. [    0.089137] pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf8efffff 64bit pref]
  299. [    0.089197] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
  300. [    0.089266] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
  301. [    0.089408] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
  302. [    0.089472] pci 0000:08:00.0: reg 10: [io  0xe800-0xe8ff]
  303. [    0.089580] pci 0000:08:00.0: reg 18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
  304. [    0.089645] pci 0000:08:00.0: reg 20: [mem 0xf8fe0000-0xf8feffff 64bit pref]
  305. [    0.089689] pci 0000:08:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
  306. [    0.089951] pci 0000:08:00.0: supports D1 D2
  307. [    0.089953] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  308. [    0.090103] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
  309. [    0.090108] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
  310. [    0.090112] pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
  311. [    0.090120] pci 0000:00:1c.5:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
  312. [    0.090164] pci 0000:09:01.0: [1180:0832] type 00 class 0x0c0010
  313. [    0.090185] pci 0000:09:01.0: reg 10: [mem 0xfebff800-0xfebfffff]
  314. [    0.090279] pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
  315. [    0.090301] pci 0000:09:01.1: [1180:0822] type 00 class 0x080500
  316. [    0.090322] pci 0000:09:01.1: reg 10: [mem 0xfebff400-0xfebff4ff]
  317. [    0.090415] pci 0000:09:01.1: supports D1 D2
  318. [    0.090417] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
  319. [    0.090439] pci 0000:09:01.2: [1180:0843] type 00 class 0x088000
  320. [    0.090460] pci 0000:09:01.2: reg 10: [mem 0xfebff000-0xfebff0ff]
  321. [    0.090553] pci 0000:09:01.2: supports D1 D2
  322. [    0.090555] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
  323. [    0.090577] pci 0000:09:01.3: [1180:0592] type 00 class 0x088000
  324. [    0.090598] pci 0000:09:01.3: reg 10: [mem 0xfebfec00-0xfebfecff]
  325. [    0.090690] pci 0000:09:01.3: supports D1 D2
  326. [    0.090692] pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
  327. [    0.090714] pci 0000:09:01.4: [1180:0852] type 00 class 0x088000
  328. [    0.090735] pci 0000:09:01.4: reg 10: [mem 0xfebfe800-0xfebfe8ff]
  329. [    0.090828] pci 0000:09:01.4: supports D1 D2
  330. [    0.090830] pci 0000:09:01.4: PME# supported from D0 D1 D2 D3hot D3cold
  331. [    0.090891] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
  332. [    0.090899] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
  333. [    0.090906] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
  334. [    0.090908] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
  335. [    0.090910] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  336. [    0.090912] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
  337. [    0.090914] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
  338. [    0.090960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  339. [    0.091067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  340. [    0.091096] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
  341. [    0.091116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  342. [    0.091159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
  343. [    0.091182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  344. [    0.091205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
  345. [    0.091224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
  346. [    0.091348]  pci0000:00: Requesting ACPI _OSC control (0x1d)
  347. [    0.091539]  pci0000:00: ACPI _OSC control (0x1d) granted
  348. [    0.099209] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
  349. [    0.099209] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
  350. [    0.099209] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
  351. [    0.100029] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
  352. [    0.100066] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
  353. [    0.100103] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
  354. [    0.100141] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
  355. [    0.100179] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
  356. [    0.100206] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  357. [    0.100206] vgaarb: loaded
  358. [    0.100206] vgaarb: bridge control possible 0000:01:00.0
  359. [    0.100206] SCSI subsystem initialized
  360. [    0.100206] libata version 3.00 loaded.
  361. [    0.100206] ACPI: bus type usb registered
  362. [    0.100206] usbcore: registered new interface driver usbfs
  363. [    0.100206] usbcore: registered new interface driver hub
  364. [    0.100206] usbcore: registered new device driver usb
  365. [    0.100206] Advanced Linux Sound Architecture Driver Version 1.0.25.
  366. [    0.100206] PCI: Using ACPI for IRQ routing
  367. [    0.110898] PCI: pci_cache_line_size set to 64 bytes
  368. [    0.111017] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
  369. [    0.111019] e820: reserve RAM buffer [mem 0xbff80000-0xbfffffff]
  370. [    0.111044] Bluetooth: Core ver 2.16
  371. [    0.111044] NET: Registered protocol family 31
  372. [    0.111044] Bluetooth: HCI device and connection manager initialized
  373. [    0.111044] Bluetooth: HCI socket layer initialized
  374. [    0.111044] Bluetooth: L2CAP socket layer initialized
  375. [    0.111044] Bluetooth: SCO socket layer initialized
  376. [    0.111085] NetLabel: Initializing
  377. [    0.111086] NetLabel:  domain hash size = 128
  378. [    0.111087] NetLabel:  protocols = UNLABELED CIPSOv4
  379. [    0.111098] NetLabel:  unlabeled traffic allowed by default
  380. [    0.111108] cfg80211: Calling CRDA to update world regulatory domain
  381. [    0.111116] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
  382. [    0.111116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  383. [    0.111116] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
  384. [    0.114006] Switching to clocksource hpet
  385. [    0.120782] pnp: PnP ACPI init
  386. [    0.120792] ACPI: bus type pnp registered
  387. [    0.120901] pnp 00:00: [bus 00-ff]
  388. [    0.120903] pnp 00:00: [io  0x0cf8-0x0cff]
  389. [    0.120906] pnp 00:00: [io  0x0000-0x0cf7 window]
  390. [    0.120909] pnp 00:00: [io  0x0d00-0xffff window]
  391. [    0.120911] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  392. [    0.120913] pnp 00:00: [mem 0x000d0000-0x000dffff window]
  393. [    0.120916] pnp 00:00: [mem 0xc0000000-0xffffffff window]
  394. [    0.120918] pnp 00:00: [mem 0x00000000-0xffffffff window]
  395. [    0.121027] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  396. [    0.121036] pnp 00:01: [mem 0xfed10000-0xfed19fff]
  397. [    0.121118] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
  398. [    0.121121] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  399. [    0.121148] pnp 00:02: [dma 4]
  400. [    0.121150] pnp 00:02: [io  0x0000-0x000f]
  401. [    0.121151] pnp 00:02: [io  0x0081-0x0083]
  402. [    0.121153] pnp 00:02: [io  0x0087]
  403. [    0.121155] pnp 00:02: [io  0x0089-0x008b]
  404. [    0.121157] pnp 00:02: [io  0x008f]
  405. [    0.121158] pnp 00:02: [io  0x00c0-0x00df]
  406. [    0.121205] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  407. [    0.121215] pnp 00:03: [io  0x0070-0x0071]
  408. [    0.121227] pnp 00:03: [irq 8]
  409. [    0.121274] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  410. [    0.121299] pnp 00:04: [io  0x0060]
  411. [    0.121301] pnp 00:04: [io  0x0064]
  412. [    0.121307] pnp 00:04: [irq 1]
  413. [    0.121354] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  414. [    0.121392] pnp 00:05: [irq 12]
  415. [    0.121441] pnp 00:05: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
  416. [    0.121452] pnp 00:06: [io  0x0061]
  417. [    0.121505] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
  418. [    0.121513] pnp 00:07: [io  0x00f0-0x00ff]
  419. [    0.121519] pnp 00:07: [irq 13]
  420. [    0.121566] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
  421. [    0.121674] pnp 00:08: [io  0x0010-0x001f]
  422. [    0.121676] pnp 00:08: [io  0x0022-0x003f]
  423. [    0.121678] pnp 00:08: [io  0x0044-0x005f]
  424. [    0.121680] pnp 00:08: [io  0x0063]
  425. [    0.121682] pnp 00:08: [io  0x0065]
  426. [    0.121683] pnp 00:08: [io  0x0067-0x006f]
  427. [    0.121685] pnp 00:08: [io  0x0072-0x007f]
  428. [    0.121687] pnp 00:08: [io  0x0080]
  429. [    0.121689] pnp 00:08: [io  0x0084-0x0086]
  430. [    0.121691] pnp 00:08: [io  0x0088]
  431. [    0.121692] pnp 00:08: [io  0x008c-0x008e]
  432. [    0.121694] pnp 00:08: [io  0x0090-0x009f]
  433. [    0.121696] pnp 00:08: [io  0x00a2-0x00bf]
  434. [    0.121698] pnp 00:08: [io  0x00e0-0x00ef]
  435. [    0.121699] pnp 00:08: [io  0x04d0-0x04d1]
  436. [    0.121701] pnp 00:08: [io  0x0800-0x087f]
  437. [    0.121703] pnp 00:08: [io  0x0400-0x041f]
  438. [    0.121705] pnp 00:08: [io  0x0500-0x057f]
  439. [    0.121707] pnp 00:08: [mem 0xf9ffec00-0xf9ffecff window]
  440. [    0.121709] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
  441. [    0.121712] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
  442. [    0.121714] pnp 00:08: [mem 0xfed45000-0xfed89fff]
  443. [    0.121716] pnp 00:08: [mem 0xfed90000-0xfed90fff]
  444. [    0.121718] pnp 00:08: [mem 0xfed91000-0xfed91fff]
  445. [    0.121720] pnp 00:08: [mem 0xfed92000-0xfed92fff]
  446. [    0.121721] pnp 00:08: [mem 0xfed93000-0xfed93fff]
  447. [    0.121723] pnp 00:08: [mem 0xffb00000-0xffbfffff]
  448. [    0.121725] pnp 00:08: [mem 0xfff00000-0xffffffff]
  449. [    0.121826] system 00:08: [io  0x04d0-0x04d1] has been reserved
  450. [    0.121828] system 00:08: [io  0x0800-0x087f] has been reserved
  451. [    0.121830] system 00:08: [io  0x0400-0x041f] has been reserved
  452. [    0.121833] system 00:08: [io  0x0500-0x057f] has been reserved
  453. [    0.121835] system 00:08: [mem 0xf9ffec00-0xf9ffecff window] has been reserved
  454. [    0.121838] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
  455. [    0.121840] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
  456. [    0.121842] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
  457. [    0.121845] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
  458. [    0.121847] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
  459. [    0.121849] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
  460. [    0.121852] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
  461. [    0.121854] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
  462. [    0.121857] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
  463. [    0.121860] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  464. [    0.121906] pnp 00:09: [mem 0xfed00000-0xfed003ff]
  465. [    0.121957] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
  466. [    0.121998] pnp 00:0a: [mem 0xffa00000-0xffbfffff]
  467. [    0.122000] pnp 00:0a: [mem 0xffe00000-0xffffffff]
  468. [    0.122079] system 00:0a: [mem 0xffa00000-0xffbfffff] could not be reserved
  469. [    0.122082] system 00:0a: [mem 0xffe00000-0xffffffff] could not be reserved
  470. [    0.122085] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  471. [    0.122119] pnp 00:0b: [mem 0xffc00000-0xffdfffff]
  472. [    0.122185] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
  473. [    0.122189] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  474. [    0.122226] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
  475. [    0.122229] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
  476. [    0.122231] pnp 00:0c: [mem 0xfec18000-0xfec1ffff]
  477. [    0.122232] pnp 00:0c: [mem 0xfec20000-0xfec27fff]
  478. [    0.122234] pnp 00:0c: [mem 0xfec28000-0xfec2ffff]
  479. [    0.122236] pnp 00:0c: [mem 0xfec30000-0xfec37fff]
  480. [    0.122238] pnp 00:0c: [mem 0xfec38000-0xfec3ffff]
  481. [    0.122240] pnp 00:0c: [io  0x0250-0x0253]
  482. [    0.122241] pnp 00:0c: [io  0x0256-0x025f]
  483. [    0.122315] system 00:0c: [io  0x0250-0x0253] has been reserved
  484. [    0.122318] system 00:0c: [io  0x0256-0x025f] has been reserved
  485. [    0.122320] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
  486. [    0.122323] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
  487. [    0.122325] system 00:0c: [mem 0xfec18000-0xfec1ffff] has been reserved
  488. [    0.122327] system 00:0c: [mem 0xfec20000-0xfec27fff] has been reserved
  489. [    0.122330] system 00:0c: [mem 0xfec28000-0xfec2ffff] has been reserved
  490. [    0.122332] system 00:0c: [mem 0xfec30000-0xfec37fff] has been reserved
  491. [    0.122334] system 00:0c: [mem 0xfec38000-0xfec3ffff] has been reserved
  492. [    0.122337] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
  493. [    0.122395] pnp 00:0d: [mem 0xe0000000-0xefffffff]
  494. [    0.122462] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
  495. [    0.122465] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
  496. [    0.128182] pnp 00:0e: [mem 0x00000000-0x0009ffff]
  497. [    0.128185] pnp 00:0e: [mem 0x000c0000-0x000cffff]
  498. [    0.128186] pnp 00:0e: [mem 0x000e0000-0x000fffff]
  499. [    0.128188] pnp 00:0e: [mem 0x00100000-0xbfffffff]
  500. [    0.128190] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
  501. [    0.128274] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
  502. [    0.128277] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
  503. [    0.128279] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
  504. [    0.128281] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
  505. [    0.128284] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
  506. [    0.128397] pnp: PnP ACPI: found 15 devices
  507. [    0.128399] ACPI: ACPI bus type pnp unregistered
  508. [    0.133104] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 06-06] add_size 1000
  509. [    0.133107] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-06] add_size 200000
  510. [    0.133110] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000
  511. [    0.133121] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 07-07] add_size 1000
  512. [    0.133124] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-07] add_size 200000
  513. [    0.133126] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 07-07] add_size 200000
  514. [    0.133150] pci 0000:00:1c.3: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
  515. [    0.133153] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  516. [    0.133155] pci 0000:00:1c.4: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
  517. [    0.133157] pci 0000:00:1c.4: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  518. [    0.133159] pci 0000:00:1c.3: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
  519. [    0.133161] pci 0000:00:1c.4: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
  520. [    0.133166] pci 0000:00:1c.3: BAR 8: assigned [mem 0xc0000000-0xc01fffff]
  521. [    0.133169] pci 0000:00:1c.3: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
  522. [    0.133172] pci 0000:00:1c.4: BAR 8: assigned [mem 0xc0400000-0xc05fffff]
  523. [    0.133175] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
  524. [    0.133178] pci 0000:00:1c.3: BAR 7: assigned [io  0x1000-0x1fff]
  525. [    0.133180] pci 0000:00:1c.4: BAR 7: assigned [io  0x2000-0x2fff]
  526. [    0.133183] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  527. [    0.133186] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
  528. [    0.133189] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdefffff]
  529. [    0.133192] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  530. [    0.133196] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  531. [    0.133211] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  532. [    0.133217] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
  533. [    0.133227] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
  534. [    0.133230] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
  535. [    0.133236] pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfe9fffff]
  536. [    0.133241] pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf8efffff 64bit pref]
  537. [    0.133248] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
  538. [    0.133251] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
  539. [    0.133258] pci 0000:00:1c.3:   bridge window [mem 0xc0000000-0xc01fffff]
  540. [    0.133262] pci 0000:00:1c.3:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
  541. [    0.133270] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
  542. [    0.133273] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
  543. [    0.133279] pci 0000:00:1c.4:   bridge window [mem 0xc0400000-0xc05fffff]
  544. [    0.133284] pci 0000:00:1c.4:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
  545. [    0.133291] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
  546. [    0.133295] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
  547. [    0.133301] pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
  548. [    0.133305] pci 0000:00:1c.5:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
  549. [    0.133313] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
  550. [    0.133319] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
  551. [    0.133365] pci 0000:00:1c.3: enabling device (0104 -> 0107)
  552. [    0.133375] pci 0000:00:1c.4: enabling device (0104 -> 0107)
  553. [    0.133390] pci 0000:00:1e.0: setting latency timer to 64
  554. [    0.133394] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  555. [    0.133396] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  556. [    0.133398] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  557. [    0.133400] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
  558. [    0.133402] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff]
  559. [    0.133404] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
  560. [    0.133406] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff]
  561. [    0.133408] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  562. [    0.133410] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
  563. [    0.133412] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
  564. [    0.133414] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe9fffff]
  565. [    0.133417] pci_bus 0000:04: resource 2 [mem 0xf6000000-0xf8efffff 64bit pref]
  566. [    0.133419] pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
  567. [    0.133421] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc01fffff]
  568. [    0.133423] pci_bus 0000:06: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
  569. [    0.133425] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
  570. [    0.133427] pci_bus 0000:07: resource 1 [mem 0xc0400000-0xc05fffff]
  571. [    0.133429] pci_bus 0000:07: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
  572. [    0.133431] pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
  573. [    0.133433] pci_bus 0000:08: resource 1 [mem 0xfea00000-0xfeafffff]
  574. [    0.133435] pci_bus 0000:08: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
  575. [    0.133437] pci_bus 0000:09: resource 1 [mem 0xfeb00000-0xfebfffff]
  576. [    0.133439] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
  577. [    0.133441] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
  578. [    0.133443] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
  579. [    0.133445] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000dffff]
  580. [    0.133447] pci_bus 0000:09: resource 8 [mem 0xc0000000-0xffffffff]
  581. [    0.133475] NET: Registered protocol family 2
  582. [    0.133585] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
  583. [    0.134416] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  584. [    0.138038] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  585. [    0.138502] TCP: Hash tables configured (established 524288 bind 65536)
  586. [    0.138504] TCP: reno registered
  587. [    0.138512] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  588. [    0.138549] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  589. [    0.138665] NET: Registered protocol family 1
  590. [    0.138700] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
  591. [    0.138702] pci 0000:00:1a.0: Performing full reset
  592. [    0.138737] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
  593. [    0.138739] pci 0000:00:1a.1: Performing full reset
  594. [    0.138763] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
  595. [    0.138765] pci 0000:00:1a.2: Performing full reset
  596. [    0.138857] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
  597. [    0.138859] pci 0000:00:1d.0: Performing full reset
  598. [    0.138884] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
  599. [    0.138885] pci 0000:00:1d.1: Performing full reset
  600. [    0.138910] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
  601. [    0.138911] pci 0000:00:1d.2: Performing full reset
  602. [    0.138978] pci 0000:01:00.0: Boot video device
  603. [    0.139033] PCI: CLS 32 bytes, default 64
  604. [    0.139092] DMAR: Host address width 36
  605. [    0.139093] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
  606. [    0.139105] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
  607. [    0.139106] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
  608. [    0.139111] IOMMU 1: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
  609. [    0.139113] DMAR: RMRR base: 0x000000000e1000 end: 0x000000000e3fff
  610. [    0.139115] DMAR: RMRR base: 0x000000bfff0000 end: 0x000000bfffffff
  611. [    0.139121] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  612. [    0.139124] software IO TLB [mem 0xbbf7a000-0xbff79fff] (64MB) mapped at [ffff8800bbf7a000-ffff8800bff79fff]
  613. [    0.139169] Simple Boot Flag at 0x51 set to 0x1
  614. [    0.139822] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
  615. [    0.139826] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
  616. [    0.139869] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  617. [    0.140154] audit: initializing netlink socket (disabled)
  618. [    0.140165] type=2000 audit(1353493974.139:1): initialized
  619. [    0.154968] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  620. [    0.158120] VFS: Disk quotas dquot_6.5.2
  621. [    0.158188] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  622. [    0.159158] fuse init (API version 7.19)
  623. [    0.159416] msgmni has been set to 7903
  624. [    0.159491] SELinux:  Registering netfilter hooks
  625. [    0.159955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  626. [    0.159957] io scheduler noop registered
  627. [    0.159958] io scheduler deadline registered
  628. [    0.160024] io scheduler cfq registered (default)
  629. [    0.160153] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  630. [    0.160348] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
  631. [    0.160536] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
  632. [    0.160729] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
  633. [    0.160957] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
  634. [    0.161214] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
  635. [    0.161441] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
  636. [    0.161691] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
  637. [    0.161693] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  638. [    0.161697] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
  639. [    0.161718] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  640. [    0.161723] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  641. [    0.161743] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
  642. [    0.161745] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  643. [    0.161750] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
  644. [    0.161769] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  645. [    0.161774] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
  646. [    0.161793] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
  647. [    0.161798] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
  648. [    0.161817] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
  649. [    0.161822] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
  650. [    0.161841] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
  651. [    0.161843] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
  652. [    0.161848] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
  653. [    0.161880] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  654. [    0.161929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  655. [    0.162589] Non-volatile memory driver v1.3
  656. [    0.162591] Linux agpgart interface v0.103
  657. [    0.162933] intel_idle: does not run on family 6 model 23
  658. [    0.163082] ACPI: AC Adapter [AC0] (on-line)
  659. [    0.163211] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
  660. [    0.163216] ACPI: Sleep Button [SLPB]
  661. [    0.163279] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
  662. [    0.166499] ACPI: Lid Switch [LID]
  663. [    0.166564] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  664. [    0.166567] ACPI: Power Button [PWRF]
  665. [    0.172515] acpi device:1d: registered as cooling_device0
  666. [    0.172537] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  667. [    0.172595] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input3
  668. [    0.172802] ACPI: Requesting acpi_cpufreq
  669. [    0.173143] Monitor-Mwait will be used to enter C-1 state
  670. [    0.173155] Monitor-Mwait will be used to enter C-3 state
  671. [    0.173167] Marking TSC unstable due to TSC halts in idle
  672. [    0.173174] ACPI: acpi_idle registered with cpuidle
  673. [    0.185950] thermal LNXTHERM:00: registered as thermal_zone0
  674. [    0.185953] ACPI: Thermal Zone [THRM] (50 C)
  675. [    0.186051] [drm] Initialized drm 1.1.0 20060810
  676. [    0.188421] brd: module loaded
  677. [    0.189918] loop: module loaded
  678. [    0.190303] ahci 0000:00:1f.2: version 3.0
  679. [    0.190363] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
  680. [    0.190401] ahci: SSS flag set, parallel bus scan disabled
  681. [    0.190434] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
  682. [    0.190438] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
  683. [    0.190443] ahci 0000:00:1f.2: setting latency timer to 64
  684. [    0.195452] scsi0 : ahci
  685. [    0.195576] scsi1 : ahci
  686. [    0.195690] scsi2 : ahci
  687. [    0.195800] scsi3 : ahci
  688. [    0.195911] scsi4 : ahci
  689. [    0.196043] scsi5 : ahci
  690. [    0.196305] ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
  691. [    0.196308] ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
  692. [    0.196310] ata3: DUMMY
  693. [    0.196311] ata4: DUMMY
  694. [    0.196312] ata5: DUMMY
  695. [    0.196314] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47
  696. [    0.196667] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  697. [    0.196768] r8169 0000:08:00.0: irq 48 for MSI/MSI-X
  698. [    0.196960] r8169 0000:08:00.0: eth0: RTL8168c/8111c at 0xffffc90000662000, 00:24:8c:98:27:9c, XID 1c4000c0 IRQ 48
  699. [    0.196962] r8169 0000:08:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
  700. [    0.197016] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
  701. [    0.197017] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
  702. [    0.197062] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
  703. [    0.197064] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90000668000
  704. [    0.197065] iwlwifi 0000:03:00.0: HW Revision ID = 0x0
  705. [    0.197138] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
  706. [    0.217441] ACPI: Battery Slot [BAT0] (battery present)
  707. [    0.250053] firewire_ohci 0000:09:01.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
  708. [    0.250349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  709. [    0.250351] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
  710. [    0.250382] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  711. [    0.250385] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  712. [    0.250434] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  713. [    0.250442] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
  714. [    0.250446] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
  715. [    0.250471] ehci_hcd 0000:00:1a.7: debug port 1
  716. [    0.250476] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  717. [    0.254374] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
  718. [    0.254376] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
  719. [    0.254389] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
  720. [    0.254395] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  721. [    0.260021] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  722. [    0.260061] usb usb1: default language 0x0409
  723. [    0.260067] usb usb1: udev 1, busnum 1, minor = 0
  724. [    0.260070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  725. [    0.260072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  726. [    0.260074] usb usb1: Product: EHCI Host Controller
  727. [    0.260076] usb usb1: Manufacturer: Linux 3.5.7-gentoo ehci_hcd
  728. [    0.260078] usb usb1: SerialNumber: 0000:00:1a.7
  729. [    0.260150] usb usb1: usb_probe_device
  730. [    0.260153] usb usb1: configuration #1 chosen from 1 choice
  731. [    0.260160] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  732. [    0.260202] hub 1-0:1.0: usb_probe_interface
  733. [    0.260204] hub 1-0:1.0: usb_probe_interface - got id
  734. [    0.260207] hub 1-0:1.0: USB hub found
  735. [    0.260211] hub 1-0:1.0: 6 ports detected
  736. [    0.260213] hub 1-0:1.0: standalone hub
  737. [    0.260214] hub 1-0:1.0: no power switching (usb 1.0)
  738. [    0.260216] hub 1-0:1.0: individual port over-current protection
  739. [    0.260217] hub 1-0:1.0: power on to power good time: 20ms
  740. [    0.260221] hub 1-0:1.0: local power source is good
  741. [    0.260223] hub 1-0:1.0: trying to enable port power on non-switchable hub
  742. [    0.260298] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  743. [    0.260301] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  744. [    0.260352] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  745. [    0.260358] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
  746. [    0.260362] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
  747. [    0.260387] ehci_hcd 0000:00:1d.7: debug port 1
  748. [    0.260391] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  749. [    0.264291] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  750. [    0.264293] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
  751. [    0.264305] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
  752. [    0.264311] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  753. [    0.270013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  754. [    0.270028] usb usb2: default language 0x0409
  755. [    0.270033] usb usb2: udev 1, busnum 2, minor = 128
  756. [    0.270035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  757. [    0.270037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  758. [    0.270039] usb usb2: Product: EHCI Host Controller
  759. [    0.270041] usb usb2: Manufacturer: Linux 3.5.7-gentoo ehci_hcd
  760. [    0.270043] usb usb2: SerialNumber: 0000:00:1d.7
  761. [    0.270109] usb usb2: usb_probe_device
  762. [    0.270111] usb usb2: configuration #1 chosen from 1 choice
  763. [    0.270117] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  764. [    0.270163] hub 2-0:1.0: usb_probe_interface
  765. [    0.270165] hub 2-0:1.0: usb_probe_interface - got id
  766. [    0.270166] hub 2-0:1.0: USB hub found
  767. [    0.270170] hub 2-0:1.0: 6 ports detected
  768. [    0.270171] hub 2-0:1.0: standalone hub
  769. [    0.270173] hub 2-0:1.0: no power switching (usb 1.0)
  770. [    0.270174] hub 2-0:1.0: individual port over-current protection
  771. [    0.270176] hub 2-0:1.0: power on to power good time: 20ms
  772. [    0.270179] hub 2-0:1.0: local power source is good
  773. [    0.270181] hub 2-0:1.0: trying to enable port power on non-switchable hub
  774. [    0.270272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  775. [    0.270274] ohci_hcd: block sizes: ed 80 td 96
  776. [    0.270315] uhci_hcd: USB Universal Host Controller Interface driver
  777. [    0.270338] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  778. [    0.270341] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  779. [    0.270395] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  780. [    0.270402] uhci_hcd 0000:00:1a.0: detected 2 ports
  781. [    0.270407] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
  782. [    0.270409] uhci_hcd 0000:00:1a.0: Performing full reset
  783. [    0.270424] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
  784. [    0.270428] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
  785. [    0.270457] usb usb3: default language 0x0409
  786. [    0.270462] usb usb3: udev 1, busnum 3, minor = 256
  787. [    0.270464] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  788. [    0.270466] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  789. [    0.270468] usb usb3: Product: UHCI Host Controller
  790. [    0.270470] usb usb3: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
  791. [    0.270472] usb usb3: SerialNumber: 0000:00:1a.0
  792. [    0.270543] usb usb3: usb_probe_device
  793. [    0.270545] usb usb3: configuration #1 chosen from 1 choice
  794. [    0.270550] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  795. [    0.270597] hub 3-0:1.0: usb_probe_interface
  796. [    0.270599] hub 3-0:1.0: usb_probe_interface - got id
  797. [    0.270601] hub 3-0:1.0: USB hub found
  798. [    0.270604] hub 3-0:1.0: 2 ports detected
  799. [    0.270606] hub 3-0:1.0: standalone hub
  800. [    0.270608] hub 3-0:1.0: no power switching (usb 1.0)
  801. [    0.270609] hub 3-0:1.0: individual port over-current protection
  802. [    0.270611] hub 3-0:1.0: power on to power good time: 2ms
  803. [    0.270614] hub 3-0:1.0: local power source is good
  804. [    0.270616] hub 3-0:1.0: trying to enable port power on non-switchable hub
  805. [    0.270655] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
  806. [    0.270678] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  807. [    0.270681] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  808. [    0.270733] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  809. [    0.270740] uhci_hcd 0000:00:1a.1: detected 2 ports
  810. [    0.270744] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
  811. [    0.270746] uhci_hcd 0000:00:1a.1: Performing full reset
  812. [    0.270761] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
  813. [    0.270773] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
  814. [    0.270801] usb usb4: default language 0x0409
  815. [    0.270806] usb usb4: udev 1, busnum 4, minor = 384
  816. [    0.270808] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  817. [    0.270810] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  818. [    0.270812] usb usb4: Product: UHCI Host Controller
  819. [    0.270814] usb usb4: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
  820. [    0.270816] usb usb4: SerialNumber: 0000:00:1a.1
  821. [    0.270893] usb usb4: usb_probe_device
  822. [    0.270896] usb usb4: configuration #1 chosen from 1 choice
  823. [    0.270901] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  824. [    0.270948] hub 4-0:1.0: usb_probe_interface
  825. [    0.270950] hub 4-0:1.0: usb_probe_interface - got id
  826. [    0.270952] hub 4-0:1.0: USB hub found
  827. [    0.270955] hub 4-0:1.0: 2 ports detected
  828. [    0.270957] hub 4-0:1.0: standalone hub
  829. [    0.270959] hub 4-0:1.0: no power switching (usb 1.0)
  830. [    0.270960] hub 4-0:1.0: individual port over-current protection
  831. [    0.270962] hub 4-0:1.0: power on to power good time: 2ms
  832. [    0.270965] hub 4-0:1.0: local power source is good
  833. [    0.270967] hub 4-0:1.0: trying to enable port power on non-switchable hub
  834. [    0.271016] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
  835. [    0.271040] uhci_hcd 0000:00:1a.2: setting latency timer to 64
  836. [    0.271043] uhci_hcd 0000:00:1a.2: UHCI Host Controller
  837. [    0.271098] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
  838. [    0.271105] uhci_hcd 0000:00:1a.2: detected 2 ports
  839. [    0.271110] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
  840. [    0.271112] uhci_hcd 0000:00:1a.2: Performing full reset
  841. [    0.271126] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
  842. [    0.271139] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
  843. [    0.271168] usb usb5: default language 0x0409
  844. [    0.271173] usb usb5: udev 1, busnum 5, minor = 512
  845. [    0.271176] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  846. [    0.271178] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  847. [    0.271180] usb usb5: Product: UHCI Host Controller
  848. [    0.271182] usb usb5: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
  849. [    0.271183] usb usb5: SerialNumber: 0000:00:1a.2
  850. [    0.271248] usb usb5: usb_probe_device
  851. [    0.271251] usb usb5: configuration #1 chosen from 1 choice
  852. [    0.271256] usb usb5: adding 5-0:1.0 (config #1, interface 0)
  853. [    0.271298] hub 5-0:1.0: usb_probe_interface
  854. [    0.271299] hub 5-0:1.0: usb_probe_interface - got id
  855. [    0.271301] hub 5-0:1.0: USB hub found
  856. [    0.271305] hub 5-0:1.0: 2 ports detected
  857. [    0.271306] hub 5-0:1.0: standalone hub
  858. [    0.271308] hub 5-0:1.0: no power switching (usb 1.0)
  859. [    0.271309] hub 5-0:1.0: individual port over-current protection
  860. [    0.271311] hub 5-0:1.0: power on to power good time: 2ms
  861. [    0.271314] hub 5-0:1.0: local power source is good
  862. [    0.271316] hub 5-0:1.0: trying to enable port power on non-switchable hub
  863. [    0.271354] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
  864. [    0.271378] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  865. [    0.271381] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  866. [    0.271432] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
  867. [    0.271439] uhci_hcd 0000:00:1d.0: detected 2 ports
  868. [    0.271444] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
  869. [    0.271445] uhci_hcd 0000:00:1d.0: Performing full reset
  870. [    0.271460] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
  871. [    0.271464] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
  872. [    0.271494] usb usb6: default language 0x0409
  873. [    0.271499] usb usb6: udev 1, busnum 6, minor = 640
  874. [    0.271501] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  875. [    0.271503] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  876. [    0.271505] usb usb6: Product: UHCI Host Controller
  877. [    0.271507] usb usb6: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
  878. [    0.271509] usb usb6: SerialNumber: 0000:00:1d.0
  879. [    0.271573] usb usb6: usb_probe_device
  880. [    0.271576] usb usb6: configuration #1 chosen from 1 choice
  881. [    0.271581] usb usb6: adding 6-0:1.0 (config #1, interface 0)
  882. [    0.271625] hub 6-0:1.0: usb_probe_interface
  883. [    0.271627] hub 6-0:1.0: usb_probe_interface - got id
  884. [    0.271629] hub 6-0:1.0: USB hub found
  885. [    0.271632] hub 6-0:1.0: 2 ports detected
  886. [    0.271634] hub 6-0:1.0: standalone hub
  887. [    0.271636] hub 6-0:1.0: no power switching (usb 1.0)
  888. [    0.271637] hub 6-0:1.0: individual port over-current protection
  889. [    0.271639] hub 6-0:1.0: power on to power good time: 2ms
  890. [    0.271642] hub 6-0:1.0: local power source is good
  891. [    0.271643] hub 6-0:1.0: trying to enable port power on non-switchable hub
  892. [    0.271685] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
  893. [    0.271704] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  894. [    0.271707] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  895. [    0.271760] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
  896. [    0.271768] uhci_hcd 0000:00:1d.1: detected 2 ports
  897. [    0.271773] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
  898. [    0.271775] uhci_hcd 0000:00:1d.1: Performing full reset
  899. [    0.271789] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
  900. [    0.271793] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
  901. [    0.271824] usb usb7: default language 0x0409
  902. [    0.271829] usb usb7: udev 1, busnum 7, minor = 768
  903. [    0.271832] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  904. [    0.271834] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  905. [    0.271836] usb usb7: Product: UHCI Host Controller
  906. [    0.271838] usb usb7: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
  907. [    0.271840] usb usb7: SerialNumber: 0000:00:1d.1
  908. [    0.271908] usb usb7: usb_probe_device
  909. [    0.271911] usb usb7: configuration #1 chosen from 1 choice
  910. [    0.271916] usb usb7: adding 7-0:1.0 (config #1, interface 0)
  911. [    0.271959] hub 7-0:1.0: usb_probe_interface
  912. [    0.271961] hub 7-0:1.0: usb_probe_interface - got id
  913. [    0.271963] hub 7-0:1.0: USB hub found
  914. [    0.271966] hub 7-0:1.0: 2 ports detected
  915. [    0.271968] hub 7-0:1.0: standalone hub
  916. [    0.271969] hub 7-0:1.0: no power switching (usb 1.0)
  917. [    0.271971] hub 7-0:1.0: individual port over-current protection
  918. [    0.271972] hub 7-0:1.0: power on to power good time: 2ms
  919. [    0.271975] hub 7-0:1.0: local power source is good
  920. [    0.271977] hub 7-0:1.0: trying to enable port power on non-switchable hub
  921. [    0.272029] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
  922. [    0.272048] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  923. [    0.272051] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  924. [    0.272101] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
  925. [    0.272108] uhci_hcd 0000:00:1d.2: detected 2 ports
  926. [    0.272112] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
  927. [    0.272114] uhci_hcd 0000:00:1d.2: Performing full reset
  928. [    0.272128] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
  929. [    0.272133] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
  930. [    0.272161] usb usb8: default language 0x0409
  931. [    0.272166] usb usb8: udev 1, busnum 8, minor = 896
  932. [    0.272168] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  933. [    0.272170] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  934. [    0.272172] usb usb8: Product: UHCI Host Controller
  935. [    0.272174] usb usb8: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
  936. [    0.272176] usb usb8: SerialNumber: 0000:00:1d.2
  937. [    0.272244] usb usb8: usb_probe_device
  938. [    0.272246] usb usb8: configuration #1 chosen from 1 choice
  939. [    0.272252] usb usb8: adding 8-0:1.0 (config #1, interface 0)
  940. [    0.272294] hub 8-0:1.0: usb_probe_interface
  941. [    0.272296] hub 8-0:1.0: usb_probe_interface - got id
  942. [    0.272298] hub 8-0:1.0: USB hub found
  943. [    0.272301] hub 8-0:1.0: 2 ports detected
  944. [    0.272303] hub 8-0:1.0: standalone hub
  945. [    0.272304] hub 8-0:1.0: no power switching (usb 1.0)
  946. [    0.272306] hub 8-0:1.0: individual port over-current protection
  947. [    0.272307] hub 8-0:1.0: power on to power good time: 2ms
  948. [    0.272310] hub 8-0:1.0: local power source is good
  949. [    0.272312] hub 8-0:1.0: trying to enable port power on non-switchable hub
  950. [    0.272353] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
  951. [    0.272440] usbcore: registered new interface driver usblp
  952. [    0.272441] Initializing USB Mass Storage driver...
  953. [    0.272502] usbcore: registered new interface driver usb-storage
  954. [    0.272503] USB Mass Storage support registered.
  955. [    0.272562] usbcore: registered new interface driver libusual
  956. [    0.272657] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  957. [    0.276815] i8042: Detected active multiplexing controller, rev 1.1
  958. [    0.277805] serio: i8042 KBD port at 0x60,0x64 irq 1
  959. [    0.277810] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  960. [    0.277830] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  961. [    0.277847] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  962. [    0.277872] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  963. [    0.277963] mousedev: PS/2 mouse device common for all mice
  964. [    0.278260] rtc_cmos 00:03: RTC can wake from S4
  965. [    0.278401] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  966. [    0.278431] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  967. [    0.278621] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  968. [    0.278704] cpuidle: using governor ladder
  969. [    0.278740] cpuidle: using governor menu
  970. [    0.278742] EFI Variables Facility v0.08 2004-May-17
  971. [    0.279675] usbcore: registered new interface driver usbhid
  972. [    0.279677] usbhid: USB HID core driver
  973. [    0.280235] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
  974. [    0.303297] Netfilter messages via NETLINK v0.30.
  975. [    0.303310] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  976. [    0.303496] ctnetlink v0.93: registering with nfnetlink.
  977. [    0.303653] ip_tables: (C) 2000-2006 Netfilter Core Team
  978. [    0.303689] TCP: cubic registered
  979. [    0.303690] Initializing XFRM netlink socket
  980. [    0.303921] NET: Registered protocol family 10
  981. [    0.304126] ip6_tables: (C) 2000-2006 Netfilter Core Team
  982. [    0.304213] sit: IPv6 over IPv4 tunneling driver
  983. [    0.304425] NET: Registered protocol family 17
  984. [    0.304466] Bluetooth: RFCOMM socket layer initialized
  985. [    0.304468] Bluetooth: RFCOMM ver 1.11
  986. [    0.304469] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  987. [    0.304471] Bluetooth: BNEP filters: protocol multicast
  988. [    0.304473] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  989. [    0.304485] Key type dns_resolver registered
  990. [    0.304680] PM: Hibernation image not present or could not be loaded.
  991. [    0.304691] registered taskstats version 1
  992. [    0.305194]   Magic number: 4:147:528
  993. [    0.305294] console [netcon0] enabled
  994. [    0.305295] netconsole: network logging started
  995. [    0.305801] ALSA device list:
  996. [    0.305802]   #0: HDA Intel at 0xf9ff8000 irq 50
  997. [    0.316195] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  998. [    0.360143] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0  ACK POWER sig=j CSC CONNECT
  999. [    0.360148] hub 1-0:1.0: port 6: status 0501 change 0001
  1000. [    0.370108] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
  1001. [    0.370113] hub 2-0:1.0: port 3: status 0501 change 0001
  1002. [    0.370125] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0  ACK POWER sig=j CSC CONNECT
  1003. [    0.370129] hub 2-0:1.0: port 5: status 0501 change 0001
  1004. [    0.370148] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1005. [    0.370153] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1006. [    0.371130] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00
  1007. [    0.371158] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00
  1008. [    0.371164] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1009. [    0.372036] uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00
  1010. [    0.460118] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000
  1011. [    0.460126] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
  1012. [    0.501136] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1013. [    0.505778] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  1014. [    0.506482] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  1015. [    0.506487] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  1016. [    0.511295] ehci_hcd 0000:00:1a.7: port 6 full speed --> companion
  1017. [    0.511300] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 003801 0  ACK POWER OWNER sig=j CONNECT
  1018. [    0.511303] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
  1019. [    0.511760] ata1.00: ATA-8: WDC WD7500BPVT-00HXZT1, 01.01A01, max UDMA/133
  1020. [    0.511763] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  1021. [    0.517345] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
  1022. [    0.517649] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  1023. [    0.517653] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  1024. [    0.522485] ata1.00: configured for UDMA/133
  1025. [    0.522642] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-0 01.0 PQ: 0 ANSI: 5
  1026. [    0.523044] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  1027. [    0.523083] sd 0:0:0:0: [sda] Write Protect is off
  1028. [    0.523085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  1029. [    0.523112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1030. [    0.523124] sd 0:0:0:0: Attached scsi generic sg0 type 0
  1031. [    0.562102] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1032. [    0.562123] hub 2-0:1.0: state 7 ports 6 chg 0028 evt 0000
  1033. [    0.562129] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
  1034. [    0.592636]  sda: sda1 sda2 sda3 < sda5 sda6 >
  1035. [    0.593340] sd 0:0:0:0: [sda] Attached SCSI disk
  1036. [    0.613213] ehci_hcd 0000:00:1d.7: port 3 full speed --> companion
  1037. [    0.613217] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003801 0  ACK POWER OWNER sig=j CONNECT
  1038. [    0.613220] hub 2-0:1.0: port 3 not reset yet, waiting 50ms
  1039. [    0.664055] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1040. [    0.664076] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
  1041. [    0.715338] ehci_hcd 0000:00:1d.7: port 5 reset complete, port enabled
  1042. [    0.715342] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1043. [    0.751252] firewire_core 0000:09:01.0: created device fw0: GUID 001e8c0001da388b, S400
  1044. [    0.766123] usb 2-5: new high-speed USB device number 3 using ehci_hcd
  1045. [    0.817337] ehci_hcd 0000:00:1d.7: port 5 reset complete, port enabled
  1046. [    0.817341] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1047. [    0.828135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1048. [    0.832922] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  1049. [    0.832927] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  1050. [    0.836642] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR07, max UDMA/133
  1051. [    0.842557] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
  1052. [    0.842561] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  1053. [    0.846241] ata2.00: configured for UDMA/133
  1054. [    0.934121] usb 2-5: skipped 1 descriptor after configuration
  1055. [    0.934123] usb 2-5: skipped 6 descriptors after interface
  1056. [    0.934126] usb 2-5: skipped 1 descriptor after endpoint
  1057. [    0.934128] usb 2-5: skipped 20 descriptors after interface
  1058. [    0.934884] usb 2-5: default language 0x0409
  1059. [    0.939260] usb 2-5: udev 3, busnum 2, minor = 130
  1060. [    0.939263] usb 2-5: New USB device found, idVendor=04f2, idProduct=b106
  1061. [    0.939265] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
  1062. [    0.939267] usb 2-5: Product: CNF7246
  1063. [    0.939269] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd
  1064. [    0.939400] usb 2-5: usb_probe_device
  1065. [    0.939403] usb 2-5: configuration #1 chosen from 1 choice
  1066. [    0.939745] usb 2-5: adding 2-5:1.0 (config #1, interface 0)
  1067. [    0.942356] usb 2-5: adding 2-5:1.1 (config #1, interface 1)
  1068. [    0.942482] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
  1069. [    0.942490] uhci_hcd 0000:00:1a.2: port 2 portsc 0093,00
  1070. [    0.942496] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
  1071. [    0.955049] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RR07 PQ: 0 ANSI: 5
  1072. [    1.046126] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
  1073. [    1.065092] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  1074. [    1.065096] cdrom: Uniform CD-ROM driver Revision: 3.20
  1075. [    1.065359] sr 1:0:0:0: Attached scsi CD-ROM sr0
  1076. [    1.065552] sr 1:0:0:0: Attached scsi generic sg1 type 5
  1077. [    1.148122] usb 5-2: new full-speed USB device number 2 using uhci_hcd
  1078. [    1.268100] usb 5-2: ep0 maxpacket = 8
  1079. [    1.289202] usb 5-2: default language 0x0409
  1080. [    1.308828] usb 5-2: udev 2, busnum 5, minor = 513
  1081. [    1.308830] usb 5-2: New USB device found, idVendor=147e, idProduct=1000
  1082. [    1.308833] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1083. [    1.308835] usb 5-2: Product: Fingerprint Sensor  
  1084. [    1.308837] usb 5-2: Manufacturer: TouchStrip        
  1085. [    1.308964] usb 5-2: usb_probe_device
  1086. [    1.308967] usb 5-2: configuration #1 chosen from 1 choice
  1087. [    1.310208] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
  1088. [    1.310361] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002
  1089. [    1.310369] uhci_hcd 0000:00:1d.1: port 1 portsc 0093,00
  1090. [    1.310376] hub 7-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
  1091. [    1.317069] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000
  1092. [    1.359243] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
  1093. [    1.371112] ata6: SATA link down (SStatus 0 SControl 300)
  1094. [    1.371178] md: Waiting for all devices to be available before autodetect
  1095. [    1.371180] md: If you don't use raid, use raid=noautodetect
  1096. [    1.371445] md: Autodetecting RAID arrays.
  1097. [    1.371447] md: Scanned 0 and added 0 devices.
  1098. [    1.371448] md: autorun ...
  1099. [    1.371449] md: ... autorun DONE.
  1100. [    1.371807] EXT3-fs (sda6): error: couldn't mount because of unsupported optional features (240)
  1101. [    1.376464] EXT2-fs (sda6): error: couldn't mount because of unsupported optional features (240)
  1102. [    1.414103] hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
  1103. [    1.454016] usb usb4: suspend_rh (auto-stop)
  1104. [    1.454041] usb usb3: suspend_rh (auto-stop)
  1105. [    1.454044] usb usb6: suspend_rh (auto-stop)
  1106. [    1.454087] usb usb8: suspend_rh (auto-stop)
  1107. [    1.461192] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
  1108. [    1.461200] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
  1109. [    1.462215] Freeing unused kernel memory: 592k freed
  1110. [    1.462371] Write protecting the kernel read-only data: 12288k
  1111. [    1.465569] Freeing unused kernel memory: 1016k freed
  1112. [    1.471604] Freeing unused kernel memory: 1908k freed
  1113. [    1.516139] usb 7-1: new full-speed USB device number 2 using uhci_hcd
  1114. [    1.636043] usb 7-1: ep0 maxpacket = 8
  1115. [    1.666864] usb 7-1: skipped 1 descriptor after interface
  1116. [    1.666869] usb 7-1: skipped 1 descriptor after interface
  1117. [    1.666873] usb 7-1: skipped 1 descriptor after interface
  1118. [    1.671836] usb 7-1: default language 0x0409
  1119. [    1.686860] usb 7-1: udev 2, busnum 7, minor = 769
  1120. [    1.686864] usb 7-1: New USB device found, idVendor=046d, idProduct=c52b
  1121. [    1.686867] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1122. [    1.686870] usb 7-1: Product: USB Receiver
  1123. [    1.686873] usb 7-1: Manufacturer: Logitech
  1124. [    1.687046] usb 7-1: usb_probe_device
  1125. [    1.687049] usb 7-1: configuration #1 chosen from 1 choice
  1126. [    1.691854] usb 7-1: adding 7-1:1.0 (config #1, interface 0)
  1127. [    1.691959] usbhid 7-1:1.0: usb_probe_interface
  1128. [    1.691962] usbhid 7-1:1.0: usb_probe_interface - got id
  1129. [    1.693968] usb 7-1: adding 7-1:1.1 (config #1, interface 1)
  1130. [    1.694047] usbhid 7-1:1.1: usb_probe_interface
  1131. [    1.694049] usbhid 7-1:1.1: usb_probe_interface - got id
  1132. [    1.696942] usb 7-1: adding 7-1:1.2 (config #1, interface 2)
  1133. [    1.696997] usbhid 7-1:1.2: usb_probe_interface
  1134. [    1.696999] usbhid 7-1:1.2: usb_probe_interface - got id
  1135. [    1.698986] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1136. [    1.698990] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
  1137. [    1.698999] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1138. [    1.699013] hub 1-0:1.0: port 6, status 0100, change 0001, 12 Mb/s
  1139. [    1.803101] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x100
  1140. [    1.803107] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
  1141. [    1.803116] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1142. [    1.803124] hub 2-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
  1143. [    1.907126] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
  1144. [    2.264703] net firewire0: IPv4 over IEEE 1394 on card 0000:09:01.0
  1145. [    2.264776] firewire_core 0000:09:01.0: refreshed device fw0
  1146. [    2.680486] kbd_mode (1058) used greatest stack depth: 5088 bytes left
  1147. [    2.724541] init-early.sh (1052) used greatest stack depth: 4496 bytes left
  1148. [    4.179414] udevd[1184]: starting version 171
  1149. [    4.255535] udevadm (1190) used greatest stack depth: 4272 bytes left
  1150. [    4.769969] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-5000-5.ucode' failed.
  1151. [    4.771110] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-5000-4.ucode' failed.
  1152. [    4.771967] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-5000-3.ucode' failed.
  1153. [    4.832358] iwlwifi 0000:03:00.0: Firmware has old API version, expected v5, got v2.
  1154. [    4.832361] iwlwifi 0000:03:00.0: New firmware can be obtained from http://www.intellinuxwireless.org/.
  1155. [    4.832363] iwlwifi 0000:03:00.0: loaded firmware version 8.24.2.12
  1156. [    4.832591] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
  1157. [    4.832593] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
  1158. [    4.832595] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
  1159. [    4.832597] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
  1160. [    4.832599] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
  1161. [    4.832601] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
  1162. [    4.832659] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
  1163. [    4.833056] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
  1164. [    4.851927] iwlwifi 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
  1165. [    4.851930] iwlwifi 0000:03:00.0: Device SKU: 0xF0
  1166. [    4.851932] iwlwifi 0000:03:00.0: Valid Tx ant: 0x2, Valid Rx ant: 0x3
  1167. [    4.851942] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
  1168. [    4.852020] Registered led device: phy0-led
  1169. [    4.852083] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  1170. [    5.054849] usbhid 7-1:1.2: looking for a minor, starting at 96
  1171. [    5.054897] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
  1172. [    5.055843] uhci_hcd 0000:00:1d.1: reserve dev 2 ep83-INT, period 2, phase 1, 36 us
  1173. [    5.058133] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input6
  1174. [    5.058186] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:1d.1-1:1
  1175. [    5.062818] wmi: Mapper loaded
  1176. [    5.286656] Linux video capture interface: v2.00
  1177. [    5.340791] uvcvideo 2-5:1.0: usb_probe_interface
  1178. [    5.340796] uvcvideo 2-5:1.0: usb_probe_interface - got id
  1179. [    5.340814] uvcvideo: Found UVC 1.00 device CNF7246 (04f2:b106)
  1180. [    5.348827] input: CNF7246 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
  1181. [    5.348873] usbcore: registered new interface driver uvcvideo
  1182. [    5.348875] USB Video Class driver (1.1.1)
  1183. [    5.372268] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096900c1)
  1184. [    5.375654] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
  1185. [    5.463213] [drm] nouveau 0000:01:00.0: ... appears to be valid
  1186. [    5.463214] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
  1187. [    5.463216] [drm] nouveau 0000:01:00.0: BIT BIOS found
  1188. [    5.463218] [drm] nouveau 0000:01:00.0: Bios version 62.94.6e.00
  1189. [    5.463221] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
  1190. [    5.463395] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
  1191. [    5.463398] [drm] nouveau 0000:01:00.0: DCB version 4.0
  1192. [    5.463400] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000323 00010034
  1193. [    5.463402] [drm] nouveau 0000:01:00.0: DCB outp 01: 02011300 00000028
  1194. [    5.463403] [drm] nouveau 0000:01:00.0: DCB outp 02: 02032312 00020010
  1195. [    5.463405] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
  1196. [    5.463407] [drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
  1197. [    5.463408] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261
  1198. [    5.463412] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD1E1
  1199. [    5.479181] usb 2-5: link qh4-0001/ffff88013664ff00 start 1 [1/0 us]
  1200. [    5.479227] usb 2-5: unlink qh4-0001/ffff88013664ff00 start 1 [1/0 us]
  1201. [    5.488774] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD637
  1202. [    5.492128] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE687
  1203. [    5.492138] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE7A8
  1204. [    5.493228] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEACF
  1205. [    5.493230] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB34
  1206. [    5.513235] [drm] nouveau 0000:01:00.0: 0xEB34: Condition still not met after 20ms, skipping following opcodes
  1207. [    5.515622] [TTM] Zone  kernel: Available graphics memory: 2025170 kiB
  1208. [    5.515624] [TTM] Initializing pool allocator
  1209. [    5.515628] [TTM] Initializing DMA pool allocator
  1210. [    5.515637] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR2)
  1211. [    5.515643] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
  1212. [    5.515659] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
  1213. [    5.530767] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  1214. [    5.530769] [drm] No driver support for vblank timestamp query.
  1215. [    5.530771] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
  1216. [    5.535932] [drm] nouveau 0000:01:00.0: 4 available performance level(s)
  1217. [    5.535935] [drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz voltage 900mV fanspeed 100%
  1218. [    5.535938] [drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 250MHz voltage 900mV fanspeed 100%
  1219. [    5.535941] [drm] nouveau 0000:01:00.0: 2: core 400MHz shader 800MHz memory 400MHz voltage 900mV fanspeed 100%
  1220. [    5.535944] [drm] nouveau 0000:01:00.0: 3: core 600MHz shader 1500MHz memory 500MHz voltage 1100mV fanspeed 100%
  1221. [    5.535946] [drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 249MHz voltage 900mV
  1222. [    5.550265] [drm] nouveau 0000:01:00.0: MM: using CRYPT for buffer copies
  1223. [    6.972867] [drm] nouveau 0000:01:00.0: allocated 1600x1200 fb: 0x2c0000, bo ffff8801364df000
  1224. [    6.972911] fbcon: nouveaufb (fb0) is primary device
  1225. [    7.258624] Console: switching to colour frame buffer device 170x48
  1226. [    7.260036] fb0: nouveaufb frame buffer device
  1227. [    7.260038] drm: registered panic notifier
  1228. [    7.260043] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
  1229. [    7.260292] modprobe (1214) used greatest stack depth: 3568 bytes left
  1230. [    9.153918] EXT4-fs (sda6): re-mounted. Opts: (null)
  1231. [    9.618391] Adding 4194300k swap on /swapfile.  Priority:-1 extents:4 across:4472828k
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top