<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 2.6.32.15r8.4-gb02a70d (hastarin@hastarin-desktop) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-51) ) #66 PREEMPT Thu Nov 18 13:06:57 EST 2010
<4>[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
<4>[    0.000000] Machine: htcleo
<4>[    0.000000] Ignoring unrecognised tag 0x00000000
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[    0.000000] On node 0 totalpages: 124864
<7>[    0.000000] free_area_init_node: node 0, pgdat c04ff508, node_mem_map c0bd1000
<7>[    0.000000]   Normal zone: 512 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
<7>[    0.000000]   HighMem zone: 464 pages used for memmap
<7>[    0.000000]   HighMem zone: 58864 pages, LIFO batch:15
<6>[    0.000000] allocating 33554432 bytes at c0fa7000 (127a7000 physical) for sf pmem arena
<6>[    0.000000] allocating 35217408 bytes at c2fa7000 (147a7000 physical) for adsp pmem arena
<6>[    0.000000] ram_console: found existing buffer, size 262132, start 255010
<6>[    0.000000] console [ram0] enabled
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 123888
<5>[    0.000000] Kernel command line: nand_boot=0
<6>[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    0.000000] Memory: 256MB 231MB = 487MB total
<5>[    0.000000] Memory: 419016KB available (4464K code, 1828K data, 400K init, 237312K highmem)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:332
<4>[    0.000000] $$$ msm_timer_init $$$
<4>[    0.000000]  1DIV = 00000003
<4>[    0.000000]  2DIV = 00000003
<4>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000000] console [tty0] enabled
<6>[    0.000000] ram_console_early_init: already initialized, bailing out
<6>[    0.000000] Calibrating delay loop... 663.55 BogoMIPS (lpj=3317760)
<4>[    0.239196] Mount-cache hash table entries: 512
<6>[    0.239532] Initializing cgroup subsys debug
<6>[    0.239532] Initializing cgroup subsys cpuacct
<6>[    0.239562] Initializing cgroup subsys freezer
<6>[    0.239593] CPU: Testing write buffer coherency: ok
<6>[    0.240936] regulator: core version 0.5
<6>[    0.241119] NET: Registered protocol family 16
<4>[    0.241485] htcleo_init()
<6>[    0.242523] Max ACPU freq from efuse data is 1190400 KHz
<6>[    0.242889] init_dex_comm: WinCE DEX initialized.
<6>[    0.242919] PLL0 @ f8005300: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz)
<6>[    0.242950] PLL1 @ f8005320: MODE=00000007 L=00000028 M=00000000 N=00000001 freq=768000000 Hz (768 MHz)
<6>[    0.243011] PLL4 @ f8005380: MODE=00000000 L=0000000f M=00000000 N=00000001 freq=288000000 Hz (288 MHz)
<6>[    0.243041] PLL5 @ f80053a0: MODE=00000000 L=00000032 M=00000000 N=00000001 freq=960000000 Hz (960 MHz)
<6>[    0.243072] PCB XC: 00000004
<6>[    0.243103] AMSS version: 15.42.50.11U
<6>[    0.243103] BD_ADDRESS=50:c3:00:00:00:00
<6>[    0.243133] register analog ops = c04d39e0
<6>[    0.243164] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier
<6>[    0.343872] Init Panel
<4>[    0.343902] panel type is 10 :board id is 536870916 : SHARP
<4>[    0.344207] htcleo_init_mmc()+
<4>[    0.344360] htcleo_init_mmc()-
<4>[    0.348297] bio: create slab <bio-0> at 0
<6>[    0.349029] mdp_probe: initialized
<6>[    0.349273] msm_i2c_probe
<6>[    0.349365] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[    0.349639] regulator: VDCDC1: 800 <--> 1350 mV
<6>[    0.349731] regulator: VDCDC2: 1260 mV
<6>[    0.349822] regulator: VDCDC3: 800 <--> 3300 mV
<6>[    0.349914] regulator: LDO1: 1000 <--> 3150 mV
<6>[    0.350006] regulator: LDO2: 3300 mV
<3>[    0.350219] msm_i2c msm_i2c.0: IRQ but nothing to do!, status 0
<6>[    0.350891] Bluetooth: Core ver 2.15
<6>[    0.351013] NET: Registered protocol family 31
<6>[    0.351043] Bluetooth: HCI device and connection manager initialized
<6>[    0.351074] Bluetooth: HCI socket layer initialized
<6>[    0.351196] Switching to clocksource gp_timer
<7>[    0.351898] spi clk = 0x0
<4>[    0.351928] spi: SPI_CONFIG=88
<4>[    0.351959] spi: SPI_IO_CONTROL=401
<4>[    0.351959] spi: SPI_OPERATIONAL=85
<4>[    0.351989] spi: SPI_ERROR_FLAGS_EN=7f
<4>[    0.351989] spi: SPI_ERROR_FLAGS=0
<4>[    0.352020] -msm_spi_probe()
<6>[    0.352386] NET: Registered protocol family 2
<6>[    0.352539] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.352874] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.353057] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.353149] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.353179] TCP reno registered
<6>[    0.353332] NET: Registered protocol family 1
<6>[    0.353546] Unpacking initramfs...
<6>[    0.535003] Freeing initrd memory: 1856K
<6>[    0.535186] smd_init()
<6>[    0.535217] smd_core_init()
<6>[    0.535278] smd_core_init() done
<3>[    0.535308] msm_init_last_radio_log: could not retrieve SMEM_CLKREGIM_BSP
<6>[    0.535430] smd_alloc_channel() cid=00 size=08192 'SMD_DS'
<6>[    0.535552] smd_alloc_channel() cid=01 size=32768 'SMD_DIAG'
<6>[    0.535644] smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
<6>[    0.535736] smd_alloc_channel() cid=05 size=08192 'SMD_CONTROL'
<6>[    0.535827] smd_alloc_channel() cid=07 size=32768 'SMD_DATA1'
<6>[    0.535888] smd_alloc_channel() cid=08 size=32768 'SMD_DATA2'
<6>[    0.535980] smd_alloc_channel() cid=09 size=32768 'SMD_DATA3'
<6>[    0.536041] smd_alloc_channel() cid=11 size=32768 'SMD_DATA5'
<6>[    0.536132] smd_alloc_channel() cid=12 size=32768 'SMD_DATA6'
<6>[    0.536224] smd_alloc_channel() cid=13 size=32768 'SMD_DATA7'
<6>[    0.536285] smd_alloc_channel() cid=15 size=08192 'SMD_DATA9'
<6>[    0.536376] smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
<6>[    0.536468] smd_alloc_channel() cid=40 size=08192 'DSP_DIAG'
<3>[    0.536529] smd_alloc_v2: cid 41 does not exist
<3>[    0.536560] smd_alloc_v1: cid 41 does not exist
<6>[    0.536590] smd_alloc_channel() cid=42 size=08192 'DSP_DAL_AQ_VID'
<6>[    0.536682] smd_alloc_channel() cid=43 size=08192 'DSP_DAL_AQ_AUD'
<6>[    0.536743] smd_alloc_channel() cid=46 size=08192 'DSP_DAL00'
<3>[    0.536834] smd_alloc_v2: cid 47 does not exist
<3>[    0.536865] smd_alloc_v1: cid 47 does not exist
<6>[    0.536895] smd_alloc_channel() cid=48 size=08192 'SMD_DAL00'
<3>[    0.537322] _smem_log_init: no power log or log_idx allocated, smem_log disabled
<6>[    0.537689] RPC Probe
<6>[    0.537872] RPC Init done
<6>[    0.537902] SMD: ch 2 0 -> 1
<6>[    0.538726] SMD: ch 2 1 -> 2
<6>[    0.761810] Init amss parameters, found AMSS: 1550
<6>[    0.762512] Acquire 'boot-time' halt_lock
<6>[    0.762939] Registered led device: button-backlight
<3>[    1.391662] msm_i2c msm_i2c.0: error, status 43c8 (5C)
<3>[    1.391693] msm_i2c msm_i2c.0: Error during data xfer (-5) (5C)
<3>[    1.391754] msm_i2c msm_i2c.0: error, status 43c8 (34)
<3>[    1.391784] msm_i2c msm_i2c.0: Error during data xfer (-5) (34)
<6>[    1.392364] input: htcleo-touchscreen as /devices/virtual/input/input0
<6>[    1.392456] leo_touch_name 0-0000: Start touchscreen htcleo-touchscreen
<6>[    1.401855] -- RK OFF --
<4>[    1.411285] htcleo_wifi_init: start
<6>[    1.413177] htcleo-microp 0-0066: microp version [05][14]
<6>[    1.416687] htcleo-microp 0-0066: Init Done
<6>[    1.416839] capella_cm3602_probe: probe
<6>[    1.417053] input: proximity as /devices/virtual/input/input1
<6>[    1.417480] htcleo_leds_probe
<6>[    1.419097] Registered led device: green
<6>[    1.419189] Registered led device: amber
<6>[    1.419311] htcleo_backlight_probe: HTCLeo Backlight connect with microP: Probe
<6>[    1.419403] Registered led device: lcd-backlight
<6>[    1.421173] Registered led device: flashlight
<6>[    1.421173] flashlight_probe: The Flashlight Driver is ready
<6>[    1.421325] batt: init over voltage interrupt detection. at 1420129433 (1970-01-01 00:00:01.420068398 UTC)
<6>[    1.421447] htc_battery_core_probe
<6>[    1.421813] batt: htc_cable_status_update: 0 -> 0
<6>[    1.422027] [HS_MGR] (htc_35mm_probe) ++++++++++++++++++++
<6>[    1.422607] input: h2w headset as /devices/virtual/input/input2
<6>[    1.422790] [HS_MGR] (htc_35mm_probe) --------------------
<6>[    1.422912] [HS_GPIO] (audiojack_probe) ++++++++++++++++++++
<6>[    1.423004] DET IRQ Registered!
<6>[    1.423034] MIC IRQ Registered!
<6>[    1.423065] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
<6>[    1.423095] [HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier
<6>[    1.423126] [HS_GPIO] (audiojack_probe) --------------------
<4>[    1.431518] highmem bounce pool size: 64 pages
<6>[    1.431793] ashmem: initialized
<6>[    1.432312] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    1.435272] alg: No test for stdrng (krng)
<6>[    1.435363] io scheduler noop registered
<6>[    1.435455] io scheduler cfq registered (default)
<7>[    1.435974] clock-wince: pc_clk_set_rate: id=42 rate=24576000
<7>[    1.436004] clock-wince: set mdns: 42, 24576000; bitidx=0, offset=0, ns=0
<4>[    1.436035] set_mdns_host_clock: FIXME! Don't know how to set clock 42 - no known Md/Ns reg
<7>[    1.436065] clock-wince: pc_clk_set_rate: id=43 rate=24576000
<7>[    1.436096] clock-wince: set mdns: 43, 24576000; bitidx=0, offset=0, ns=0
<4>[    1.436126] set_mdns_host_clock: FIXME! Don't know how to set clock 43 - no known Md/Ns reg
<6>[    1.436614] msmfb_probe() installing 480 x 800 panel
<6>[    1.444824] msmfb: full update starting
<6>[    1.444854] mdp_lcdc_probe: initialized
<6>[    1.450775] BCM chip
<6>[    1.450897] msm_serial_hs_bcm.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
<6>[    1.451385] msm_serial_hs module loaded
<6>[    1.453338] loop: module loaded
<6>[    1.453399] pmem: 1 init
<6>[    1.454162] pmem_adsp: 1 init
<6>[    1.454895] pmem_venc: 1 init
<6>[    1.455352] Android kernel panic handler initialized (bind=kpanic)
<6>[    1.455444] spi_bma150_probe: G-sensor connect with microP: start initial
<6>[    1.491546] msmfb: full update completed
<6>[    1.491607] msmfb: turning on panel
<6>[    1.491638] lcdc_unblank: ()
<6>[    1.491638] sharp_panel_unblank
<6>[    1.511596] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[    1.511932] msm_nand: allocated dma buffer at ffa01000, dma_addr 2123c000
<6>[    1.512054] status: e03020
<6>[    1.512084] nandid: 5510bcad maker ad device bc
<6>[    1.512115] Found a supported NAND device
<6>[    1.512115] NAND Id  : 0xBCAD
<6>[    1.512145] Buswidth : 16 Bits
<6>[    1.512176] Density  : 512 MByte
<6>[    1.512176] Pagesize : 2048 Bytes
<6>[    1.512207] Erasesize: 131072 Bytes
<6>[    1.512207] Oobsize  : 64 Bytes
<6>[    1.512298] msm_nand: read CFG0 = aa5400c0, CFG1 = 6744e
<6>[    1.512329] CFG0 Old: 0xaa5400c0
<6>[    1.512329] CFG1 Old: 0x0006744e
<6>[    1.512359] CFG0 Init  : 0xea5400c0
<6>[    1.512359] CFG1 Init  : 0x0006744e
<6>[    1.512390] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4 num_addr_cycles=5
<6>[    1.512481] DEV_CMD1: f00f3000
<6>[    1.512542] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
<4>[    1.512573] #MTD# parts in atag = 0
<6>[    1.513244] PPP generic driver version 2.4.2
<6>[    1.513458] PPP Deflate Compression module registered
<6>[    1.513488] PPP BSD Compression module registered
<6>[    1.514282] PPP MPPE Compression module registered
<6>[    1.514343] NET: Registered protocol family 24
<6>[    1.515350] msm72k_udc: msm72k_probe
<6>[    1.515380] usb: accessory detect 0
<6>[    1.515380] usb: id_pin_gpio 0
<6>[    1.515441] msm72k_udc: msm72k_probe() io=d0860000, irq=58, dma=ffa02000(2124f000)
<6>[    1.515960] android init
<6>[    1.516052] android_probe pdata: c04d01e8
<6>[    1.516143] android_bind
<7>[    1.516174] android_bind_config
<6>[    1.516174] android_usb gadget: android_usb ready
<6>[    1.516204] msm72k_udc: msm72k_udc: registered gadget driver 'android_usb'
<6>[    1.516296] f_adb init
<6>[    1.516326] android_register_function adb
<6>[    1.516326] f_mass_storage init
<6>[    1.516357] android_register_function usb_mass_storage
<6>[    1.516387] f_rndis init
<6>[    1.516387] android_register_function ether
<6>[    1.516418] serial init
<6>[    1.516418] android_register_function serial
<6>[    1.516448] diag init
<6>[    1.516510] diag:msm_diag_probe(), pdev->id=0x1
<6>[    1.516540] SMD: ch 40 0 -> 1
<6>[    1.516601] android_register_function diag
<6>[    1.516632] SMD: ch 40 1 -> 2
<4>[    1.516662] android_usb gadget: using random self ethernet address
<4>[    1.516693] android_usb gadget: using random host ethernet address
<6>[    1.517059] usb0: MAC d6:22:5f:d2:34:fd
<6>[    1.517089] usb0: HOST MAC d2:fa:08:12:75:16
<6>[    1.517211] mass_storage_bind_config
<6>[    1.517333] fsg_probe pdata: c04d126c
<6>[    1.517608] hsusb: IDLE -> ONLINE
<6>[    1.517608] usb: lpm exit
<6>[    1.517639] hsusb: reset controller
<6>[    1.517700] android_usb gadget: Number of LUNs=1
<6>[    1.517730] adb_bind_config
<6>[    1.518096] diag_bind_config
<6>[    1.518402] serial_bind_config
<6>[    1.518951] usb: product_id=0xff9
<6>[    1.519531] GPIO Matrix Keypad Driver: Start keypad matrix for htcleo-keypad in interrupt mode
<6>[    1.519622] GPIO Input Driver: Start gpio inputs for htcleo-keypad in interrupt mode
<6>[    1.519866] input: htcleo-keypad as /devices/virtual/input/input3
<6>[    1.520355] using input dev h2w headset for key reset
<6>[    1.520385] using input dev htcleo-keypad for key reset
<6>[    1.520660] RTC: Init MSM RTC Clock
<6>[    1.521057] using rtc device, msm_rtc, for alarms
<6>[    1.521087] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
<6>[    1.521179] AKM8973 compass driver: init
<6>[    1.521911] input: compass as /devices/virtual/input/input4
<6>[    1.522369] adp1650 Led Flash driver: init
<6>[    1.522430] Linux video capture interface: v2.00
<6>[    1.522949] sctrl.node 0
<6>[    1.522979] s5k3e2fx_sensor_probe
<6>[    1.551269] msm_hsusb_phy_reset
<6>[    1.761596] msm72k_udc: ulpi: write 0x0c to 0x31
<6>[    1.761627] msm72k_udc: ulpi: write 0x30 to 0x32
<6>[    1.761657] msm72k_udc: ulpi: write 0x1d to 0x0d
<6>[    1.761657] msm72k_udc: ulpi: write 0x1d to 0x10
<6>[    1.761718] usb: notify offline
<6>[    1.761749] msm_hsusb: enable pullup
<6>[    1.761779] hsusb: ONLINE -> OFFLINE
<6>[    1.761810] usb: notify offline
<6>[    1.761810] msm_hsusb_phy_reset
<6>[    1.821624] usb: lpm enter
<6>[    1.821624] usb_suspend_phy
<6>[    1.972991] s5k3e2fx:kobject creat and add
<6>[    1.973052] s5k3e2fx:sysfs_create_file
<6>[    1.973083] s5k3e2fx:sysfs_create_file
<6>[    1.973876] [ds2746_batt]ds2746_battery_init
<6>[    1.973968] [ds2746_batt] ds2746_battery_prob
<4>[    1.974304] [D:BATT]Use 600 Kohm thermal resistance
<6>[    1.974914] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
<6>[    1.975006] Bluetooth: HCI UART driver ver 2.2
<6>[    1.975036] Bluetooth: HCI H4 protocol initialized
<6>[    1.975067] Bluetooth: HCILL protocol initialized
<6>[    1.976226] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
<6>[    1.976257] mmc0: Platform slot type: N/A
<6>[    1.976257] mmc0: 4 bit data mode enabled
<6>[    1.976287] mmc0: 8 bit data mode disabled
<6>[    1.976318] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
<6>[    1.976348] mmc0: Slot eject status = 1
<6>[    1.976348] mmc0: Power save feature enable = 1
<6>[    1.976379] mmc0: DM non-cached buffer at ffa04000, dma_addr 0x21246000
<6>[    1.976409] mmc0: DM cmd busaddr 0x21246000, cmdptr busaddr 0x21246300
<4>[    1.977020] @@@ SD power 0 @@@
<6>[    1.977264] mmc1: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,240 dma 8
<6>[    1.977294] mmc1: Platform slot type: SD
<6>[    1.977325] mmc1: 4 bit data mode enabled
<6>[    1.977325] mmc1: 8 bit data mode disabled
<6>[    1.977355] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
<6>[    1.977386] mmc1: Slot eject status = 0
<6>[    1.977386] mmc1: Power save feature enable = 1
<6>[    1.977416] mmc1: DM non-cached buffer at ffa05000, dma_addr 0x212ac000
<6>[    1.977447] mmc1: DM cmd busaddr 0x212ac000, cmdptr busaddr 0x212ac300
<6>[    1.978393] logger: created 64K log 'log_main'
<6>[    1.978515] logger: created 256K log 'log_events'
<6>[    1.978637] logger: created 64K log 'log_radio'
<6>[    1.978729] logger: created 64K log 'log_system'
<4>[    1.979095] GACT probability NOT on
<4>[    1.979125] Mirror/redirect action on
<4>[    1.979125] u32 classifier
<4>[    1.979156]     Actions configured
<4>[    1.979187] Netfilter messages via NETLINK v0.30.
<4>[    1.979248] nf_conntrack version 0.5.0 (6585 buckets, 26340 max)
<4>[    1.979492] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[    1.979522] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[    1.979553] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[    1.979675] ctnetlink v0.93: registering with nfnetlink.
<6>[    1.979827] xt_time: kernel timezone is -0000
<6>[    1.979888] GRE over IPv4 tunneling driver
<6>[    1.980438] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.980529] arp_tables: (C) 2002 David S. Miller
<6>[    1.980621] TCP cubic registered
<6>[    1.980834] NET: Registered protocol family 10
<6>[    1.981414] lo: Disabled Privacy Extensions
<6>[    1.982086] Mobile IPv6
<6>[    1.982116] IPv6 over IPv4 tunneling driver
<6>[    1.982543] sit0: Disabled Privacy Extensions
<6>[    1.982971] ip6tnl0: Disabled Privacy Extensions
<6>[    1.983093] NET: Registered protocol family 17
<6>[    1.983154] NET: Registered protocol family 15
<6>[    1.983184] Bluetooth: L2CAP ver 2.14
<6>[    1.983215] Bluetooth: L2CAP socket layer initialized
<6>[    1.983245] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    1.983276] Bluetooth: SCO socket layer initialized
<6>[    1.983520] Bluetooth: RFCOMM TTY layer initialized
<6>[    1.983551] Bluetooth: RFCOMM socket layer initialized
<6>[    1.983581] Bluetooth: RFCOMM ver 1.11
<6>[    1.983612] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    1.983642] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    1.983764] ThumbEE CPU extension supported.
<6>[    1.983795] wifi_nvs_init
<6>[    1.984161] [Port list] init()
<6>[    1.984191] [Port list] Virtual Address for port_list: [f81b6da0]
<6>[    1.984222] [Port list] Physical Address for port_list: [1B6DA0]
<6>[    1.984924] input: lightsensor-level as /devices/virtual/input/input5
<6>[    1.985443] clock_late_init() disabled 19 unused clocks
<6>[    1.985473] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
<4>[    1.986938] [D:BATT] V=4118(698) I=-263(fffffd66) C=1195.0/1230(10be) id=4(a3) T=290(10b) KADC=1000
<4>[    1.986999] [D:BATT] state change(0->2), full count=0, over load count=0 [1985]
<6>[    1.987030] batt: ds2784_notify: 1 98 at 1985833785 (1970-01-01 00:00:01.985803268 UTC)
<6>[    1.987091] batt: batt:power_supply_changed: battery at 1985894820 (1970-01-01 00:00:01.985864303 UTC)
<4>[    1.987426] regulator_init_complete: incomplete constraints, leaving ldo2 on
<4>[    1.987640] regulator_init_complete: incomplete constraints, leaving ldo1 on
<4>[    1.987854] regulator_init_complete: incomplete constraints, leaving dcdc3 on
<4>[    1.988067] regulator_init_complete: incomplete constraints, leaving dcdc2 on
<4>[    1.988281] regulator_init_complete: incomplete constraints, leaving dcdc1 on
<6>[    1.989685] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-11-20 21:31:40 UTC (1290288700)
<6>[    1.990783] Freeing init memory: 400K
<4>[    2.014465] @@@ SD power 17 @@@
<4>[    2.080963] @@@ SD power 15 @@@
<4>[    2.200469] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[    2.200531] mmc1: new high speed SDHC card at address f1b5
<6>[    2.200836] mmcblk0: mmc1:f1b5 SD16G 14.9 GiB
<6>[    2.201019]  mmcblk0: p1
<6>[   14.834869] ADDRCONF(NETDEV_UP): usb0: link is not ready
<3>[   18.002716] init: cannot open '/initlogo.rle'
<3>[   18.039947] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<6>[   18.226318] enabling adb
<6>[   18.226715] adb_open
<6>[   18.625915] warning: `rild' uses 32-bit capabilities (legacy support in use)
<3>[   18.673889] (sync) bdi_queue_work: wake up flush-179:0 FAIL, retries 4
<6>[   19.153747] SMD: ch 0 0 -> 1
<6>[   19.153869] SMD: ch 5 0 -> 1
<4>[   19.153900] -qmi_open 0
<4>[   19.153961] -qmi_open 0
<4>[   19.153991] -qmi_open 0
<4>[   19.154907] +qmi_read 256
<4>[   19.154998] +qmi_read 256
<4>[   19.155029] +qmi_read 256
<6>[   19.155426] SMD: ch 5 1 -> 2
<6>[   19.155456] SMD: ch 0 1 -> 2
<6>[   21.216308] htc-acoustic: open
<6>[   21.216461] htc-acoustic: release
<6>[   21.217407] Audio: voice: stop
<6>[   21.220031] Audio: SWITCH DEVICE 17306899, acdb 607
<6>[   21.220062] q6audio_init
<6>[   21.220123] audio: init: first run, init dummy control
<6>[   21.220153] SMD: ch 43 0 -> 1
<6>[   21.321777] SMD: ch 43 1 -> 2
<6>[   21.322967] dal_attach: status = 0, name = 'DAL_AQ_AUD'
<6>[   21.323669] dal_attach: status = 0, name = 'DAL_AQ_AUD'
<6>[   21.909240] open done!
<6>[   21.909332] SMD: ch 48 0 -> 1
<6>[   22.011444] SMD: ch 48 1 -> 2
<6>[   22.011627] dal_attach: status = 0, name = 'DAL00'
<6>[   22.011932] dal_attach: status = 0, name = 'DAL00'
<6>[   22.011962] Audio: htcleo_analog_init
<6>[   22.024261] acdb: trying htcleo.acdb
<6>[   22.024322] misc msm_audio_ctl: firmware: requesting htcleo.acdb
<3>[   22.028167] init: untracked pid 216 exited
<6>[   34.122131] msm_kgsl: initilized dev=1 mmu=on
<6>[   34.122283] misc kgsl: firmware: requesting yamato_pm4.fw
<6>[   34.124267] misc kgsl: firmware: requesting yamato_pfp.fw
<3>[   34.125183] init: untracked pid 229 exited
<3>[   34.128051] init: untracked pid 230 exited
<4>[   51.993804] [D:BATT] V=4108(694) I=-267(fffffd5d) C=1191.0/1230(10b5) id=4(a3) T=290(109) KADC=1000
<4>[   51.993865] [D:BATT] voltage stable
<6>[   51.993896] batt: ds2784_notify: 1 97 at 51992669755 (2010-11-20 21:32:30.504241976 UTC)
<6>[   51.993957] batt: batt:power_supply_changed: battery at 51992761307 (2010-11-20 21:32:30.504303011 UTC)
<4>[   58.581207] wlan: wifi_set_power = 1
<4>[   58.581359] htcleo_wifi_power: 1
<4>[   58.963562] wlan: wifi_set_carddetect = 1
<6>[   58.963623] htcleo_wifi_set_carddetect: 1
<7>[   58.963653] mmc0: card_present 1
<6>[   58.963653] mmc0: Slot status change detected (0 -> 1)
<4>[   58.965057] wlan: Dongle Host Driver, version 4.218.204.2
<6>[   60.761291] Release 'boot-time' halt_lock
<6>[   60.781494] acpuclk_set_vdd_level got regulator setting vdd_level 1050
<7>[   61.521545] mmc0: queuing CIS tuple 0x91 length 3
<6>[   61.521606] mmc0: new high speed SDIO card at address 0001
<4>[   61.527740] wlan: DHD: dongle ram size is set to 294912(orig 294912)
<4>[   61.763854] wlan: firmware version: wl0: Oct 28 2009 15:45:05 version 4.218.161.0
<4>[   61.763854]
<4>[   61.868896] wlan: Enter set packet filter
<4>[   61.870452] wlan: start to add pkt filter 100
<4>[   61.872070] wlan: Enter set packet filter
<4>[   61.873626] wlan: start to add pkt filter 102
<4>[   61.875213] wlan: Enter set packet filter
<4>[   61.876739] wlan: start to add pkt filter 104
<4>[   61.880371] wlan: dhd_preinit_ioctls:str=0x6e756c6c207061636b657400
<4>[   61.884643] wlan: eth0: Broadcom Dongle Host Driver mac=00:90:4c:c5:00:34
<4>[   63.568237] wlan: pfn: set ssid = routercasa
<4>[   63.568359] wlan: lightest is 0, weightest is 0, samessid = 65535
<4>[   64.536743] wlan: wake lock 15 secs!
<4>[   64.536834] wlan: Link UP
<4>[   64.557250] wlan: power active. ctrl_mask: 0x1
<4>[   64.564514] wlan: btcoex_dhcp_timer_start: sco time=0
<4>[   64.566955] wlan: btcoex_dhcp_timer_start: enable BT DHCP Timer
<4>[   64.589385] wlan: STA connect received 1
<4>[   66.575317] wlan: update pm: PM_FAST
<4>[   66.576232] wlan: btcoex_dhcp_timer_stop disable BT DHCP Timer
<4>[   66.576324] wlan: btcoex_dhcp_timer_stop BT DHCP Timer disabled
<4>[   66.580230] wlan: Enter set packet filter
<4>[   66.581909] wlan: start to add pkt filter 101
<6>[   69.703430] notify_cable_status(1)
<6>[   69.703521] msm_hsusb_set_vbus_state: 1
<6>[   69.703643] hsusb: OFFLINE -> ONLINE
<6>[   69.703704] usb: lpm exit
<6>[   69.704772] hsusb: reset controller
<6>[   69.741333] msm_hsusb_phy_reset
<6>[   69.951293] msm72k_udc: ulpi: write 0x0c to 0x31
<6>[   69.951416] msm72k_udc: ulpi: write 0x30 to 0x32
<6>[   69.951477] msm72k_udc: ulpi: write 0x1d to 0x0d
<6>[   69.951538] msm72k_udc: ulpi: write 0x1d to 0x10
<6>[   69.951660] usb: notify offline
<6>[   69.951690] msm_hsusb: enable pullup
<6>[   69.954772] msm72k_udc: usb: suspend
<6>[   69.971374] usb: not AC charger
<6>[   70.064758] msm72k_udc: usb: reset
<6>[   70.064910] usb: send connect type 1
<6>[   70.064971] fsg_set_ums_state: 1
<6>[   70.065032] ums: set state 1
<6>[   70.065307] batt:online=1
<6>[   70.065338] [ds2746_batt] cable change to 1
<6>[   70.065429] batt: ds2784_notify: 0 1 at 70064233467 (2010-11-20 21:32:48.575744652 UTC)
<6>[   70.065551] batt: charger ON (SLOW) at 70064386054 (2010-11-20 21:32:48.575897240 UTC)
<6>[   70.066986] msm72k_udc: usb: portchange USB_SPEED_HIGH
<6>[   70.225982] msm72k_udc: usb: reset
<6>[   70.228240] msm72k_udc: usb: portchange USB_SPEED_HIGH
<6>[   70.423278] android_usb gadget: high speed config #1: android
<6>[   70.423675] adb_function_set_alt: maxsize = 512
<6>[   70.424011] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
<6>[   70.424438] ums: set state 1
<7>[   72.601257] eth0: no IPv6 routers present
<7>[   81.281280] usb0: no IPv6 routers present
<6>[   82.021697] acdb: load 'htcleo.acdb' failed, trying 'default.acdb'
<6>[   82.021820] misc msm_audio_ctl: firmware: requesting default.acdb
<4>[   82.048095] $$$ q6audio_init_rx_volumes
<6>[   82.048095] Audio: htcleo_get_rx_vol 0
<4>[   82.048431] $$ DEV=0107AC88: vol is 0
<6>[   82.048461] Audio: htcleo_get_rx_vol 0
<3>[   82.048706] init: untracked pid 325 exited
<4>[   82.049285] $$ DEV=01081511: vol is 0
<6>[   82.049285] Audio: htcleo_get_rx_vol 0
<4>[   82.050018] audio_cb: s=1 e=0107605c status=20
<4>[   82.050079] $$ DEV=0107AC8A: vol is 0
<6>[   82.050109] Audio: htcleo_get_rx_vol 500
<4>[   82.050964] audio_cb: s=1 e=0107605c status=20
<4>[   82.051025] $$ DEV=01081513: vol is 500
<6>[   82.051055] Audio: htcleo_get_rx_vol 500
<4>[   82.051910] audio_cb: s=1 e=0107605c status=20
<4>[   82.051971] $$ DEV=01081514: vol is 500
<6>[   82.051971] Audio: htcleo_get_rx_vol 500
<4>[   82.052856] audio_cb: s=1 e=0107605c status=20
<4>[   82.052917] $$ DEV=0108C508: vol is 500
<6>[   82.052917] Audio: htcleo_get_rx_vol 500
<4>[   82.053680] audio_cb: s=1 e=0107605c status=20
<4>[   82.054016] $$ DEV=0108C894: vol is 500
<6>[   82.054046] Audio: htcleo_get_rx_vol 500
<4>[   82.054962] audio_cb: s=1 e=0107605c status=20
<4>[   82.055145] $$ DEV=0108C895: vol is 500
<6>[   82.055175] Audio: htcleo_get_rx_vol 500
<4>[   82.055664] audio_cb: s=1 e=0107605c status=20
<4>[   82.055725] $$ DEV=0108C509: vol is 500
<6>[   82.055755] Audio: htcleo_get_rx_vol 0
<4>[   82.056823] $$ DEV=0108151C: vol is 0
<6>[   82.056854] Audio: htcleo_get_rx_vol 0
<4>[   82.057525] $$ DEV=0107AC8D: vol is 0
<6>[   82.057556] Audio: htcleo_get_rx_vol 0
<4>[   82.057952] audio_cb: s=1 e=0107605c status=20
<4>[   82.058074] $$ DEV=01081510: vol is 0
<6>[   82.058105] Audio: htcleo_get_rx_vol 500
<4>[   82.058959] audio_cb: s=1 e=0107605c status=20
<4>[   82.059082] $$ DEV=01081512: vol is 500
<6>[   82.059112] Audio: htcleo_get_rx_vol 0
<4>[   82.059936] audio_cb: s=1 e=0107605c status=20
<4>[   82.060058] $$ DEV=0108151B: vol is 0
<6>[   82.060089] Audio: htcleo_get_rx_vol 400
<4>[   82.060913] audio_cb: s=1 e=0107605c status=20
<4>[   82.061035] $$ DEV=01081519: vol is 400
<6>[   82.061065] Audio: htcleo_get_rx_vol 400
<4>[   82.061828] audio_cb: s=1 e=0107605c status=20
<4>[   82.062164] $$ DEV=0108151A: vol is 400
<6>[   82.062194] Audio: htcleo_get_rx_vol 400
<4>[   82.062896] audio_cb: s=1 e=0107605c status=20
<4>[   82.063018] $$ DEV=01081518: vol is 400
<6>[   82.063049] Audio: htcleo_get_rx_vol 500
<4>[   82.063873] audio_cb: s=1 e=0107605c status=20
<4>[   82.063934] $$ DEV=01089BF4: vol is 500
<6>[   82.063964] Audio: htcleo_get_rx_vol 500
<4>[   82.064788] audio_cb: s=1 e=0107605c status=20
<4>[   82.064880] $$ DEV=01089BF3: vol is 500
<4>[   82.064910] audio_update_acdb (17306899, 607)
<4>[   82.064910] table
<6>[   82.064941] acdb: 588 bytes for device 607, rate 48000.
<4>[   82.065002] res1 = 588
<4>[   82.065002] res2 = 588
<4>[   82.065032] call audio_set_table
<4>[   82.065765] audio_cb: s=1 e=0107605c status=20
<4>[   82.066711] audio_cb: s=1 e=0107605c status=20
<4>[   82.074676] audio_cb: s=1 e=0107605c status=20
<6>[   82.074768] Audio: SWITCH DEVICE 17306898, acdb 0
<6>[   82.075408] Audio: htcleo_get_rx_vol 500
<4>[   82.075439] $$ DEV=01081513: vol is 500
<4>[   82.075469] audio_cb: s=1 e=0107605c status=20
<4>[   82.079681] audio_cb: s=1 e=0107605c status=20
<6>[   83.276611] request_suspend_state: wakeup (3->0) at 83275354085 (2010-11-20 21:33:01.786926306 UTC)
<6>[   83.401336] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[   83.651947] __spi_bma150_set_mode: BMA get into SLEEP mode!
<4>[   86.812255] wlan: pfn: set ssid = routercasa
<4>[   86.812286] wlan: lightest is 1, weightest is 0, samessid = 0
<4>[   86.812316] wlan: connect to latest ssid, ignore!
<4>[   87.547058] wlan: wake lock 15 secs!
<4>[   87.547119] wlan: Link UP
<4>[   87.626953] wlan: STA connect received 1
<6>[   91.815795] led_ril_status_value = 0
<6>[   91.815948] led_ril_status_value = 0
<4>[  109.863189] [D:BATT] V=4172(6ae) I=93(ed) C=1192.0/1230(10b6) id=4(a7) T=290(105) KADC=1000
<4>[  109.863250] [D:BATT] acr update: P=969, C=4274.
<4>[  109.863464] [D:BATT]new RARC=969 C=1191mAh adc=4274.
<4>[  109.863494] [D:BATT] state change(2->3), full count=0, over load count=0 [1798619573]