Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # WEEWX CONFIGURATION FILE
- #
- # Copyright (c) 2009-2015 Tom Keffer <tkeffer@gmail.com>
- # See the file LICENSE.txt for your rights.
- ##############################################################################
- # This section is for general configuration information.
- # Set to 1 for extra debug info, otherwise comment it out or set to zero
- debug = 1
- # Root directory of the weewx data file hierarchy for this station
- WEEWX_ROOT = /
- # How long to wait before timing out a socket (FTP, HTTP) connection
- socket_timeout = 20
- # Do not modify this. It is used when installing and updating weewx.
- version = 3.8.2
- ##############################################################################
- # This section is for information about the station.
- [Station]
- # Description of the station location
- location = KKKKKKKK
- # Latitude and longitude in decimal degrees
- latitude = XXXXXXX
- longitude = YYYYYY
- # Altitude of the station, with unit it is in. This is downloaded from
- # from the station if the hardware supports it.
- altitude = 20, meter
- # Set to type of station hardware. There must be a corresponding stanza
- # in this file with a 'driver' parameter indicating the driver to be used.
- station_type = WS3000
- # If you have a website, you may specify an URL
- #station_url = http://www.example.com
- # The start of the rain year (1=January; 10=October, etc.). This is
- # downloaded from the station if the hardware supports it.
- rain_year_start = 1
- # Start of week (0=Monday, 6=Sunday)
- week_start = 6
- ##############################################################################
- [Simulator]
- # This section is for the weewx weather station simulator
- # The time (in seconds) between LOOP packets.
- loop_interval = 2.5
- # The simulator mode can be either 'simulator' or 'generator'.
- # Real-time simulator. Sleep between each LOOP packet.
- mode = simulator
- # Generator. Emit LOOP packets as fast as possible (useful for testing).
- #mode = generator
- # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default
- # is to use the present time.
- #start = 2011-01-01T00:00
- # The driver to use:
- driver = weewx.drivers.simulator
- ##############################################################################
- # This section is for uploading data to Internet sites
- [StdRESTful]
- [[StationRegistry]]
- # To register this weather station with weewx, set this to true
- register_this_station = false
- [[AWEKAS]]
- # This section is for configuring posts to AWEKAS.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a username and password.
- # To guard against parsing errors, put the password in quotes.
- enable = false
- username = replace_me
- password = replace_me
- [[CWOP]]
- # This section is for configuring posts to CWOP.
- # If you wish to do this, set the option 'enable' to true,
- # and specify the station ID (e.g., CW1234).
- enable = false
- station = replace_me
- # If this is an APRS (radio amateur) station, uncomment
- # the following and replace with a passcode (e.g., 12345).
- #passcode = replace_me (APRS stations only)
- [[PWSweather]]
- # This section is for configuring posts to PWSweather.com.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station and password.
- # To guard against parsing errors, put the password in quotes.
- enable = false
- station = replace_me
- password = replace_me
- [[WOW]]
- # This section is for configuring posts to WOW.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station and password.
- # To guard against parsing errors, put the password in quotes.
- enable = false
- station = replace_me
- password = replace_me
- [[Wunderground]]
- # This section is for configuring posts to the Weather Underground.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station (e.g., 'KORHOODR3') and password.
- # To guard against parsing errors, put the password in quotes.
- enable = false
- station = replace_me
- password = replace_me
- # Set the following to True to have weewx use the WU "Rapidfire"
- # protocol. Not all hardware can support it. See the User's Guide.
- rapidfire = False
- ##############################################################################
- # This section specifies what reports, using which skins, to generate.
- [StdReport]
- # Where the skins reside, relative to WEEWX_ROOT
- SKIN_ROOT = /etc/weewx/skins
- # Where the generated reports should go, relative to WEEWX_ROOT
- HTML_ROOT = /var/www/html/weewx
- # The database binding indicates which data should be used in reports.
- data_binding = wx_binding
- # Each of the following subsections defines a report that will be run.
- [[StandardReport]]
- # See the customizing guide to change the units, plot types and line
- # colors, modify the fonts, display additional sensor data, and other
- # customizations. Many of those changes can be made here by overriding
- # parameters, or by modifying templates within the skin itself.
- # The StandardReport uses the 'Standard' skin, which contains the
- # images, templates and plots for the report.
- skin = Standard
- [[[Units]]]
- [[[[Groups]]]]
- group_altitude = meter
- group_speed2 = meter_per_second2
- group_pressure = mbar
- group_rain = mm
- group_rainrate = mm_per_hour
- group_temperature = degree_C
- group_degree_day = degree_C_day
- group_speed = meter_per_second
- [[FTP]]
- # FTP'ing the results to a webserver is treated as just another report,
- # albeit one with an unusual report generator!
- skin = Ftp
- # If you wish to use FTP, uncomment and fill out the next four lines.
- # Use quotes around passwords to guard against parsing errors.
- #user = replace with the ftp username
- #password = replace with the ftp password
- #server = replace with the ftp server name, e.g, www.threefools.org
- #path = replace with the ftp destination directory (e.g., /weather)
- # Set to True for an FTP over TLS (FTPS) connection. Not all servers
- # support this.
- secure_ftp = False
- # To upload files from something other than what HTML_ROOT is set
- # to above, specify a different HTML_ROOT here.
- #HTML_ROOT = /var/www/html/weewx
- # Most FTP servers use port 21
- port = 21
- # Set to 1 to use passive mode, zero for active mode
- passive = 1
- [[RSYNC]]
- # rsync'ing to a webserver is treated as just another report
- skin = Rsync
- # If you wish to use rsync, you must configure passwordless ssh using
- # public/private key authentication from the user account that weewx
- # runs as to the user account on the remote machine where the files
- # will be copied.
- #
- # The server, user, and path determine where files will be sent.
- # The server is the server name, such as www.threefools.org
- # The user is the username, such as weewx
- # The path is the destination directory, such as /var/www/html/weather
- # Be sure that the user has write permissions on the destination!
- #server = replace_me
- #user = replace_me
- #path = replace_me
- # Rsync can be configured to remove files from the remote server if
- # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
- # make a mistake in the remote path, you could could unintentionally
- # cause unrelated files to be deleted. Set to 1 to enable remote file
- # deletion, zero to allow files to accumulate remotely.
- delete = 0
- ##############################################################################
- # This service acts as a filter, converting the unit system coming from
- # the hardware to a unit system in the database.
- [StdConvert]
- # The target_unit affects only the unit system in the database. Once
- # chosen it cannot be changed without converting the entire database.
- # Modification of target_unit after starting weewx will result in
- # corrupt data - the database will contain a mix of US and METRIC data.
- #
- # The value of target_unit does not affect the unit system for
- # reporting - reports can display US, Metric, or any combination of units.
- #
- # In most cases, target_unit should be left as the default: US
- #
- # In particular, those migrating from a standard wview installation
- # should use US since that is what the wview database contains.
- # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
- target_unit = METRICWX # Options are 'US', 'METRICWX', or 'METRIC'
- ##############################################################################
- # This section can adjust data using calibration expressions.
- [StdCalibrate]
- [[Corrections]]
- # For each type, an arbitrary calibration expression can be given.
- # It should be in the units defined in the StdConvert section.
- # Example:
- foo = foo + 0.2
- ##############################################################################
- # This section is for quality control checks. If units are not specified,
- # values must be in the units defined in the StdConvert section.
- [StdQC]
- [[MinMax]]
- barometer = 26, 32.5, inHg
- outHumidity = 0, 100
- inHumidity = 0, 100
- windSpeed = 0, 120, mile_per_hour
- pressure = 24, 34.5, inHg
- extraTemp1 = -40,40,degree_C
- extraTemp2 = 0,40,degree_C
- extraTemp3 = 0,40,degree_C
- extraTemp4 = 0,40,degree_C
- extraTemp5 = 0,40,degree_C
- extraTemp6 = 0,40,degree_C
- extraTemp7 = 0,40,degree_C
- extraHumid1 = 0,100
- extraHumid2 = 0,100
- extraHumid3 = 0,100
- extraHumid4 = 0,100
- extraHumid5 = 0,100
- extraHumid6 = 0,100
- extraHumid7 = 0,100
- ##############################################################################
- # This section controls the origin of derived values.
- [StdWXCalculate]
- [[Calculations]]
- # Derived quantities are calculated by this service. Possible values are:
- # hardware - use the value provided by hardware
- # software - use the value calculated by weewx
- # prefer_hardware - use value provide by hardware if available,
- # otherwise use value calculated by weewx
- pressure = prefer_hardware
- barometer = prefer_hardware
- altimeter = prefer_hardware
- windchill = prefer_hardware
- heatindex = prefer_hardware
- dewpoint = prefer_hardware
- inDewpoint = prefer_hardware
- rainRate = prefer_hardware
- ##############################################################################
- # For hardware that supports it, this section controls how often the
- # onboard clock gets updated.
- [StdTimeSynch]
- # How often to check the weather station clock for drift (in seconds)
- clock_check = 14400
- # How much it can drift before we will correct it (in seconds)
- max_drift = 5
- ##############################################################################
- # This section is for configuring the archive service.
- [StdArchive]
- # If the station hardware supports data logging then the archive interval
- # will be downloaded from the station. Otherwise, specify it (in seconds).
- archive_interval = 120
- # If possible, new archive records are downloaded from the station
- # hardware. If the hardware does not support this, then new archive
- # records will be generated in software.
- # Set the following to "software" to force software record generation.
- record_generation = hardware
- # Whether to include LOOP data in hi/low statistics
- loop_hilo = True
- # The data binding used to save archive records
- data_binding = wx_binding
- ##############################################################################
- # This section binds a data store to a database.
- [DataBindings]
- [[wx_binding]]
- # The database must match one of the sections in [Databases].
- # This is likely to be the only option you would want to change.
- database = archive_sqlite
- # The name of the table within the database
- table_name = archive
- # The manager handles aggregation of data for historical summaries
- manager = weewx.wxmanager.WXDaySummaryManager
- # The schema defines the structure of the database.
- # It is *only* used when the database is created.
- schema = user.ws3000Extensions.ws3000Schema
- ##############################################################################
- # This section defines various databases.
- [Databases]
- # A SQLite database is simply a single file
- [[archive_sqlite]]
- database_type = SQLite
- database_name = weewx.sdb
- # MySQL
- [[archive_mysql]]
- database_type = MySQL
- database_name = weewx
- ##############################################################################
- # This section defines defaults for the different types of databases.
- [DatabaseTypes]
- # Defaults for SQLite databases
- [[SQLite]]
- driver = weedb.sqlite
- # Directory in which the database files are located
- SQLITE_ROOT = /var/lib/weewx
- # Defaults for MySQL databases
- [[MySQL]]
- driver = weedb.mysql
- # The host where the database is located
- host = localhost
- # The user name for logging in to the host
- user = weewx
- # The password for the user name (quotes guard against parsing errors)
- password = weewx
- ##############################################################################
- # This section configures the internal weewx engine.
- [Engine]
- [[Services]]
- # This section specifies the services that should be run. They are
- # grouped by type, and the order of services within each group
- # determines the order in which the services will be run.
- prep_services = weewx.engine.StdTimeSynch
- data_services = ,
- process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
- archive_services = weewx.engine.StdArchive
- restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
- report_services = weewx.engine.StdPrint, weewx.engine.StdReport
- ##############################################################################
- [WS3000]
- # This section is for the Ambient Weather WS3000
- # The driver to use
- driver = user.ws3000
- # [Optional] Fetch data from the console or generate it
- # Useful to test without a console plugged in
- # Values are: 'hardware' or 'simulation'
- # mode = simulation
- # The station model, e.g., WS3000, WS3000-X3, WS3000-X5 (all the same...)
- model = WS3000
- # [Optional] The interval at which loop packets should be generated by the driver
- # Default is 10
- loop_interval = 60
- # [Optional] USB vendor ID and product ID, as returned by lsusb. Only required if the device
- # cannot be found with the default values
- # Defaults are 0x0483 and 0x5750
- vendor_id = 0x0483
- product_id = 0x5750
- # [Optional] By default, all the sensor values are stored in the extraTemp or extraHumid columns.
- # The assumption here is that the WS3000 is used as a secondary station used
- # to enhance another existing station with additional temperature sensors,
- # and that the usual inTemp, outTemp, etc. are already used by the primary station.
- # NOTE: of course, the database schema must be modified to include the missing columns.
- [[sensor_map]]
- extraTemp1 = t_1
- extraTemp2 = t_2
- extraTemp3 = t_3
- extraTemp4 = t_4
- extraTemp5 = t_5
- extraTemp6 = t_6
- extraTemp7 = t_7
- extraTemp8 = t_8
- extraHumid1 = h_1
- extraHumid2 = h_2
- extraHumid3 = h_3
- extraHumid4 = h_4
- extraHumid5 = h_5
- extraHumid6 = h_6
- extraHumid7 = h_7
- extraHumid8 = h_8
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement