API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 23rd, 2016
262
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 60.30 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000@0] Booting Linux on physical CPU 0x200
  2. [ 0.000000@0] Linux version 3.10.33-gf8b5541-dirty (Oman@ubuntu) (gcc version 4.7.3 20130205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.02-01-20130221 - Linaro GCC 2013.02) ) #4 SMP PREEMPT Tue Mar 29 18:24:22 CST 2016
  3. [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  4. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000@0] Machine: Amlogic Meson8B, model: AMLOGIC
  6. [ 0.000000@0] physical memory start address is 0x200000
  7. [ 0.000000@0] reserved_end is b9fffff
  8. [ 0.000000@0]
  9. [ 0.000000@0] Total memory is 1022 MiB
  10. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0b9fffff, size: 90 MiB
  11. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
  12. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
  13. [ 0.000000@0] deinterlace0(high) : 0x3df00000 - 0x40000000 ( 33 MiB)
  14. [ 0.000000@0] mesonstream0(high) : 0x3bf00000 - 0x3df00000 ( 32 MiB)
  15. [ 0.000000@0] vdec0(low) : 0x07a00000 - 0x0ba00000 ( 64 MiB)
  16. [ 0.000000@0] ppmgr0(high) : 0x3af00000 - 0x3bf00000 ( 16 MiB)
  17. [ 0.000000@0] get storage device: storage 2
  18. [ 0.000000@0] value=2
  19. [ 0.000000@0] get_storage_device : get storage device: storage 2
  20. [ 0.000000@0] get_storage_device : value=2
  21. [ 0.000000@0] [get_storage_device] storage_flag=2
  22. [ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000
  23. [ 0.000000@0] cma: Found region@0, memory base 0, size 18 MiB
  24. [ 0.000000@0] cma: CMA: reserved 20 MiB at 2dc00000
  25. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  26. [ 0.000000@0] On node 0 totalpages: 214272
  27. [ 0.000000@0] free_area_init_node: node 0, pgdat c0b18d80, node_mem_map c0dbc000
  28. [ 0.000000@0] Normal zone: 1520 pages used for memmap
  29. [ 0.000000@0] Normal zone: 0 pages reserved
  30. [ 0.000000@0] Normal zone: 167936 pages, LIFO batch:31
  31. [ 0.000000@0] HighMem zone: 362 pages used for memmap
  32. [ 0.000000@0] HighMem zone: 46336 pages, LIFO batch:15
  33. [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
  34. [ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c1526000 s8832 r8192 d15744 u32768
  35. [ 0.000000@0] pcpu-alloc: s8832 r8192 d15744 u32768 alloc=8*4096
  36. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  37. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 212752
  38. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=2 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full hdmimode=720p cvbsmode=576cvbs androidboot.firstboot=0 hdmitx=cecf
  39. [ 0.000000@0] cvbs performance line = 0
  40. [ 0.000000@0] osd1:1
  41. [ 0.000000@0] loaded:268435459
  42. [ 0.000000@0] logo has been loaded
  43. [ 0.000000@0] 720p:11
  44. [ 0.000000@0] full:2
  45. [ 0.000000@0] kernel get hdmimode form uboot is 720p
  46. [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
  47. [ 0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv
  48. [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf
  49. [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf
  50. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  51. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  52. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  53. [ 0.000000@0] Memory: 64MB 16MB 757MB = 837MB total
  54. [ 0.000000@0] Memory: 803740k/803740k available, 53348k reserved, 185344K highmem
  55. [ 0.000000@0] Virtual kernel memory layout:
  56. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  57. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  58. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  59. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  60. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  61. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  62. [ 0.000000@0] .text : 0xc0008000 - 0xc0a65220 (10613 kB)
  63. [ 0.000000@0] .init : 0xc0a66000 - 0xc0a9e280 ( 225 kB)
  64. [ 0.000000@0] .data : 0xc0aa0000 - 0xc0b19c80 ( 488 kB)
  65. [ 0.000000@0] .bss : 0xc0b19c80 - 0xc0db7a4c (2680 kB)
  66. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  67. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  68. [ 0.000000@0] NR_IRQS:256
  69. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  70. [ 0.000000@0] Global timer: MESON TIMER-F (c0abe200) initialized
  71. [ 0.000000@0] Switching to timer-based delay loop
  72. [ 0.000000@0] Console: colour dummy device 80x30
  73. [ 0.000000@0] meson_serial_console_setup
  74. [ 0.000000@0] console [ttyS0] enabled
  75. [ 0.366798@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  76. [ 0.377065@0] pid_max: default: 32768 minimum: 301
  77. [ 0.382064@0] Security Framework initialized
  78. [ 0.386081@0] SELinux: Initializing.
  79. [ 0.389748@0] SELinux: Starting in permissive mode
  80. [ 0.389878@0] Mount-cache hash table entries: 512
  81. [ 0.402135@0] CPU: Testing write buffer coherency: ok
  82. [ 0.402807@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  83. [ 0.407419@0] Setting up static identity map for 0xc0749e88 - 0xc0749ee0
  84. [ 0.414239@0] L310 cache controller enabled
  85. [ 0.418194@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
  86. [ 0.425688@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
  87. [ 0.433788@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  88. [ 0.520402@1] CPU1: Booted secondary processor
  89. [ 0.520425@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  90. [ 0.540405@2] CPU2: Booted secondary processor
  91. [ 0.540428@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  92. [ 0.560397@3] CPU3: Booted secondary processor
  93. [ 0.560420@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  94. [ 0.560551@0] Brought up 4 CPUs
  95. [ 0.588739@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  96. [ 0.594962@0] CPU: All CPU(s) started in SVC mode.
  97. [ 0.600797@0] devtmpfs: initialized
  98. [ 0.613023@0] clkrate [ xtal ] : 24000000
  99. [ 0.613067@0] clkrate [ pll_sys ] : 792000000
  100. [ 0.615909@0] clkrate [ pll_fixed ] : 2550000000
  101. [ 0.620606@0] clkrate [ pll_vid ] : 366000000
  102. [ 0.624999@0] clkrate [ pll_ddr ] : 0
  103. [ 0.628724@0] clkrate [ a9_clk ] : 792000000
  104. [ 0.633067@0] clkrate [ clk81 ] : 159375000
  105. [ 0.637866@0] pinctrl core: initialized pinctrl subsystem
  106. [ 0.643072@0] regulator-dummy: no parameters
  107. [ 0.648580@0] NET: Registered protocol family 16
  108. [ 0.656780@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  109. [ 0.660367@0] VPU driver version: v02
  110. [ 0.662234@0] load vpu_clk in dts: 182150000Hz(3)
  111. [ 0.666932@0] vpu_probe OK
  112. [ 0.670088@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device
  113. [ 0.680633@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  114. [ 0.682644@0] register lm device lm-root
  115. [ 0.686196@0] register lm device lm1
  116. [ 0.689743@0] register lm device lm0
  117. [ 0.693505@0] Init pinux probe!
  118. [ 0.697471@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
  119. [ 0.702214@0] tv_init_module
  120. [ 0.705015@0] major number 254 for disp
  121. [ 0.708902@0] vout_register_server
  122. [ 0.712299@0] register tv module server ok
  123. [ 0.716611@0] aml_i2c version: 20140813
  124. [ 0.720427@0] plat->state_name:default
  125. [ 0.720450@0] master_no = 0, master_regs=fe600500
  126. [ 0.720606@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ed74a4a8)
  127. [ 0.726398@0] aml-i2c i2c-AO: aml i2c bus driver.
  128. [ 0.731172@0] plat->state_name:default
  129. [ 0.731195@0] master_no = 2, master_regs=fe1087c0
  130. [ 0.731332@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ed74a8a8)
  131. [ 0.737048@0] aml-i2c i2c-B: aml i2c bus driver.
  132. [ 0.741722@0] plat->state_name:default
  133. [ 0.741743@0] master_no = 3, master_regs=fe1087e0
  134. [ 0.741862@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ed74aca8)
  135. [ 0.747611@0] aml-i2c i2c-C: aml i2c bus driver.
  136. [ 0.752285@0] plat->state_name:default
  137. [ 0.752306@0] master_no = 4, master_regs=fe108d20
  138. [ 0.752442@0] aml-i2c i2c-D: add adapter aml_i2c_adap4(ed74b0a8)
  139. [ 0.758175@0] aml-i2c i2c-D: aml i2c bus driver.
  140. [ 0.762923@0] aml_pmu_init, 454
  141. [ 0.765916@0] call aml_dvfs_init in
  142. [ 0.769414@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
  143. [ 0.769430@0] [DVFS]dvfs table of vcck_dvfs is:
  144. [ 0.769441@0] [DVFS] freq, min_uV, max_uV
  145. [ 0.769451@0] [DVFS] 96000, 860000, 860000
  146. [ 0.769461@0] [DVFS] 192000, 860000, 860000
  147. [ 0.769471@0] [DVFS] 312000, 860000, 860000
  148. [ 0.769481@0] [DVFS] 408000, 860000, 860000
  149. [ 0.769491@0] [DVFS] 504000, 860000, 860000
  150. [ 0.769501@0] [DVFS] 600000, 860000, 860000
  151. [ 0.769511@0] [DVFS] 720000, 860000, 860000
  152. [ 0.769521@0] [DVFS] 816000, 900000, 900000
  153. [ 0.769531@0] [DVFS] 1008000, 920000, 920000
  154. [ 0.769541@0] [DVFS] 1200000, 970000, 970000
  155. [ 0.769551@0] [DVFS] 1320000, 1100000, 1100000
  156. [ 0.769561@0] [DVFS] 1488000, 1100000, 1100000
  157. [ 0.769571@0] [DVFS] 1536000, 1140000, 1140000
  158. [ 0.769680@0] hdmitx: system: amhdmitx_init
  159. [ 0.773516@0] hdmitx: system: Ver: 2014May6
  160. [ 0.777782@0] hdmitx: system: amhdmitx_probe
  161. [ 0.782428@0] hdmitx: system: gate/pwr cmd: 7
  162. [ 0.786228@0] hdmitx: system: ALREADY init VIC = 4
  163. [ 0.791008@0] hdmitx: system: gate/pwr cmd: 0
  164. [ 0.795819@1] hdmitx: system: reset intr mask
  165. [ 0.810471@0] hdmitx: system: irq 1
  166. [ 0.856642@0] bio: create slab <bio-0> at 0
  167. [ 0.857490@0] SCSI subsystem initialized
  168. [ 0.859353@0] usbcore: registered new interface driver usbfs
  169. [ 0.864814@0] usbcore: registered new interface driver hub
  170. [ 0.870313@0] usbcore: registered new device driver usb
  171. [ 0.875478@0] Linux video capture interface: v2.00
  172. [ 0.880684@0] request vpu clk holdings: vencp 106250000Hz
  173. [ 0.885503@0] TV mode 720p selected.
  174. [ 0.889068@0] already display in uboot
  175. [ 0.897817@0] call aml_pmu_probe_init in
  176. [ 0.898085@0] get property: use_pwm, value:0x00000001, dec: 1
  177. [ 0.904409@0] get property: table_count, value:0x0000001d, dec: 29
  178. [ 0.912124@0] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
  179. [ 0.919271@0] 0, 001c0000, 860000
  180. [ 0.922761@0] 1, 001b0001, 870000
  181. [ 0.926198@0] 2, 001a0002, 880000
  182. [ 0.929661@0] 3, 00190003, 890000
  183. [ 0.930868@1] hdmitx: system: gate/pwr cmd: 4
  184. [ 0.937466@0] 4, 00180004, 900000
  185. [ 0.940941@0] 5, 00170005, 910000
  186. [ 0.944381@0] 6, 00160006, 920000
  187. [ 0.947845@0] 7, 00150007, 930000
  188. [ 0.951321@0] 8, 00140008, 940000
  189. [ 0.954772@0] 9, 00130009, 950000
  190. [ 0.958247@0] 10, 0012000a, 960000
  191. [ 0.961710@0] 11, 0011000b, 970000
  192. [ 0.965162@0] 12, 0010000c, 980000
  193. [ 0.968626@0] 13, 000f000d, 990000
  194. [ 0.972112@0] 14, 000e000e, 1000000
  195. [ 0.975553@0] 15, 000d000f, 1010000
  196. [ 0.979017@0] 16, 000c0010, 1020000
  197. [ 0.982491@0] 17, 000b0011, 1030000
  198. [ 0.985944@0] 18, 000a0012, 1040000
  199. [ 0.989419@0] 19, 00090013, 1050000
  200. [ 0.992882@0] 20, 00080014, 1060000
  201. [ 0.996334@0] 21, 00070015, 1070000
  202. [ 0.999798@0] 22, 00060016, 1080000
  203. [ 1.003272@0] 23, 00050017, 1090000
  204. [ 1.006737@0] 24, 00040018, 1100000
  205. [ 1.010199@0] 25, 00030019, 1110000
  206. [ 1.013652@0] 26, 0002001a, 1120000
  207. [ 1.017115@0] 27, 0001001b, 1130000
  208. [ 1.020590@0] 28, 0000001c, 1140000
  209. [ 1.024113@0] get pin for pwm--------
  210. [ 1.027683@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
  211. [ 1.027991@0] Advanced Linux Sound Architecture Driver Initialized.
  212. [ 1.034539@0] Bluetooth: Core ver 2.16
  213. [ 1.037691@0] NET: Registered protocol family 31
  214. [ 1.042265@0] Bluetooth: HCI device and connection manager initialized
  215. [ 1.048732@0] Bluetooth: HCI socket layer initialized
  216. [ 1.053765@0] Bluetooth: L2CAP socket layer initialized
  217. [ 1.058985@0] Bluetooth: SCO socket layer initialized
  218. [ 1.064278@0] cfg80211: Calling CRDA to update world regulatory domain
  219. [ 1.072489@0] Switching to clocksource Timer-E
  220. [ 1.087440@0] NET: Registered protocol family 2
  221. [ 1.088174@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  222. [ 1.093710@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  223. [ 1.100284@0] TCP: Hash tables configured (established 8192 bind 8192)
  224. [ 1.106715@0] TCP: reno registered
  225. [ 1.109990@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  226. [ 1.116104@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  227. [ 1.122870@0] NET: Registered protocol family 1
  228. [ 1.127431@0] RPC: Registered named UNIX socket transport module.
  229. [ 1.133099@0] RPC: Registered udp transport module.
  230. [ 1.137976@0] RPC: Registered tcp transport module.
  231. [ 1.142812@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
  232. [ 1.145263@1] hdmitx: system: gate/pwr cmd: 5
  233. [ 1.145267@1] hdmitx: edid: edid ready
  234. [ 1.145270@1] hdmitx: system: gate/pwr cmd: 4
  235. [ 1.161899@0] wifi_dev_probe
  236. [ 1.164622@0] wifi_dt : interrupt_pin=GPIOX_21
  237. [ 1.169067@0] wifi_dt : irq_num=null
  238. [ 1.172598@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
  239. [ 1.177742@0] wifi_dt : power_on_pin=GPIOAO_6
  240. [ 1.182028@0] wifi_dt : power_on_pin2=GPIOX_11
  241. [ 1.186469@0] interrupt_pin=118, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=107
  242. [ 1.195622@0] Unpacking initramfs...
  243. [ 1.345265@1] hdmitx: system: gate/pwr cmd: 5
  244. [ 1.345311@1] hdmitx: edid: edid ready
  245. [ 1.347725@1] hdmitx: edid: check sum valid
  246. [ 1.351874@1] hdmitx: edid: check sum valid
  247. [ 1.356090@1] hdmitx: edid: blk0 raw data
  248. [ 1.360014@1] 00ffffffffffff004c2de507000000002f14010380703f780aee91a3544c9926
  249. [ 1.367200@1] 0f5054bdee0001010101010101010101010101010101662150b051001b304070
  250. [ 1.374386@1] 3600a05a0000001e011d007251d01e206e285500a05a0000001e000000fd0018
  251. [ 1.386014@0] Freeing initrd memory: 1980K (c4e09000 - c4ff8000)
  252. [ 1.387831@0] audit: initializing netlink socket (disabled)
  253. [ 1.387875@0] type=2000 audit(1.310:1): initialized
  254. [ 1.388440@2] balance_pgdat end zone=0, pgdat_is_balanced=0
  255. [ 1.388635@0] bounce pool size: 64 pages
  256. [ 1.395848@0] VFS: Disk quotas dquot_6.5.2
  257. [ 1.396193@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  258. [ 1.399828@0] NFS: Registering the id_resolver key type
  259. [ 1.399888@0] Key type id_resolver registered
  260. [ 1.399892@0] Key type id_legacy registered
  261. [ 1.400555@0] NTFS driver 2.1.30 [Flags: R/W].
  262. [ 1.400930@0] fuse init (API version 7.22)
  263. [ 1.439728@0] msgmni has been set to 1267
  264. [ 1.439796@0] SELinux: Registering netfilter hooks
  265. [ 1.442065@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  266. [ 1.442073@0] io scheduler noop registered
  267. [ 1.442077@0] io scheduler deadline registered
  268. [ 1.442272@0] io scheduler cfq registered (default)
  269. [ 1.381573@1] 4b1a4417000a202020202020000000fc0053414d53554e470a20202020200143
  270. [ 1.466775@1]
  271. [ 1.468423@1] hdmitx: edid: blk1 raw data
  272. [ 1.472404@1] 020323f14b841305140312101f2021222309070783010000e2000f67030c0020
  273. [ 1.479591@1] 00b82d011d00bc52d01e20b8285540a05a0000001e011d8018711c1620582c25
  274. [ 1.486777@1] 00a05a0000009e011d80d0721c1620102c2580a05a0000009e8c0ad08a20e02d
  275. [ 1.493964@1] 10103e9600a05a000000180000000000000000000000000000000000000000cc
  276. [ 1.501151@1]
  277. [ 1.502863@1] hdmitx: edid: find IEEEOUT
  278. [ 1.506780@1] hdmitx: video: get current mode: 720p
  279. [ 1.511553@1] is_similar_hdmi_vic[325] vic_old=4,mode_new=11
  280. [ 1.517191@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 4
  281. [ 1.523755@1] hdmitx: audio: audio channel num is 0
  282. [ 1.528621@1] hdmitx: audio: SPDIF
  283. [ 1.531988@1] hdmitx: audio: current VIC: 4
  284. [ 1.536152@1] hdmitx: audio: audio sample rate: 0
  285. [ 1.540810@1] hdmitx: audio: reset audio N para
  286. [ 1.545337@1] hdmitx: audio: PCM out to HDMI
  287. [ 1.548961@0] loop: module loaded
  288. [ 1.549815@0] tun: Universal TUN/TAP device driver, 1.6
  289. [ 1.549820@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  290. [ 1.550047@0] PPP generic driver version 2.4.2
  291. [ 1.550262@0] PPP BSD Compression module registered
  292. [ 1.550266@0] PPP Deflate Compression module registered
  293. [ 1.550281@0] PPP MPPE Compression module registered
  294. [ 1.550286@0] NET: Registered protocol family 24
  295. [ 1.550388@0] usbcore: registered new interface driver rtl8150
  296. [ 1.550443@0] usbcore: registered new interface driver r8152
  297. [ 1.550510@0] usbcore: registered new interface driver asix
  298. [ 1.550577@0] usbcore: registered new interface driver ax88179_178a
  299. [ 1.550630@0] usbcore: registered new interface driver cdc_ether
  300. [ 1.550682@0] usbcore: registered new interface driver dm9601
  301. [ 1.550735@0] usbcore: registered new interface driver sr9700_android
  302. [ 1.550801@0] usbcore: registered new interface driver CoreChips
  303. [ 1.550871@0] usbcore: registered new interface driver smsc75xx
  304. [ 1.550950@0] usbcore: registered new interface driver smsc95xx
  305. [ 1.551003@0] usbcore: registered new interface driver net1080
  306. [ 1.551056@0] usbcore: registered new interface driver cdc_subset
  307. [ 1.551108@0] usbcore: registered new interface driver zaurus
  308. [ 1.551163@0] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  309. [ 1.551259@0] usbcore: registered new interface driver cdc_ncm
  310. [ 1.551578@0] usbcore: registered new interface driver cdc_acm
  311. [ 1.551582@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  312. [ 1.551666@0] usbcore: registered new interface driver usb-storage
  313. [ 1.551802@0] usbcore: registered new interface driver usbserial
  314. [ 1.551858@0] usbcore: registered new interface driver option
  315. [ 1.551901@0] usbserial: USB Serial support registered for GSM modem (1-port)
  316. [ 1.552318@0] mousedev: PS/2 mouse device common for all mice
  317. [ 1.552827@0] i2c /dev entries driver
  318. [ 1.553684@0] usbcore: registered new interface driver uvcvideo
  319. [ 1.553687@0] USB Video Class driver (1.1.1)
  320. [ 1.554112@0] device-mapper: uevent: version 1.0.3
  321. [ 1.554540@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  322. [ 1.554757@0] Bluetooth: HCI UART driver ver 2.2
  323. [ 1.554763@0] Bluetooth: HCI H4 protocol initialized
  324. [ 1.555604@0] usbcore: registered new interface driver usbhid
  325. [ 1.555608@0] usbhid: USB HID core driver
  326. [ 1.556241@0] zram: Created 1 device(s) ...
  327. [ 1.556815@0] ashmem: initialized
  328. [ 1.557050@0] logger: created 256K log 'log_main'
  329. [ 1.557314@0] logger: created 256K log 'log_events'
  330. [ 1.557543@0] logger: created 256K log 'log_radio'
  331. [ 1.557770@0] logger: created 256K log 'log_system'
  332. [ 1.558093@0] vout_init_module
  333. [ 1.558165@0] start init vout module
  334. [ 1.558213@0] create vout attribute ok
  335. [ 1.558752@0] ge2d_init
  336. [ 1.558764@0] ge2d_dev major:247
  337. [ 1.558985@0] ge2d start monitor
  338. [ 1.559058@0] osd_init
  339. [ 1.559066@2] ge2d workqueue monitor start
  340. [ 1.559121@0] osd_probe, vinfo:c078df94
  341. [ 1.559571@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  342. [ 1.559576@0] osd_probe, mydef_var:c0ae1cd8, vinfo:c078df94
  343. [ 1.559582@0] init fbdev bpp is :32
  344. [ 1.559585@0] ---------------clear framebuffer0 memory
  345. [ 1.855078@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0200000, size=1024K
  346. [ 1.857531@0] osd_probe, mydef_var:c0ae1cd8, vinfo:c078df94
  347. [ 1.863070@0] don't find to display_size_default from mesonfb-dts
  348. [ 1.866914@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  349. [ 1.866918@1] hdmitx: audio: i2s_to_spdif_flag:1
  350. [ 1.866921@1] hdmitx: audio: Enable audio spdif to HDMI
  351. [ 1.866984@1] hdmitx: cec: CEC not ready
  352. [ 1.888666@0] init fbdev bpp is :24
  353. [ 1.904930@0] osd probe ok
  354. [ 1.905389@0] enter aml_sysled_init
  355. [ 1.905808@0] enter aml_sysled_probe
  356. [ 1.909283@0] start read sedio dts
  357. [ 1.912747@0] sysled pdata->name:aml-setio
  358. [ 1.916849@0] sysled pdata->red_led_mode:1
  359. [ 1.920886@0] sysled pdata->blue_led_mode:1
  360. [ 1.925082@0] red_led_gpio is 13
  361. [ 1.928249@0] blue_led_gpio is 13
  362. [ 1.932286@0] amlvideo-000: V4L2 device registered as video10
  363. [ 1.937652@0] ionvideo-000: V4L2 device registered as video13
  364. [ 1.942984@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
  365. [ 1.951389@0] DI: di_init
  366. [ 1.951445@0] DI: di_probe
  367. [ 1.951989@0] aml_wdt_driver_init,301
  368. [ 1.955086@0] ** disable watchdog
  369. [ 1.958564@0] keys===========================================
  370. [ 1.964009@0] keys_devno=f400000
  371. [ 1.967482@0] securitykey: device aml_keys created
  372. [ 1.972005@0] amlkeys=0
  373. [ 1.974449@0] platform_driver_register--aml_keys_driver--------------------
  374. [ 1.981784@0] start uart_ao_ttyS0:(irq = 122)
  375. [ 1.985720@0] register uart_ao ok
  376. [ 1.989289@0] start uart_a_ttyS1:(irq = 58)
  377. [ 1.993100@0] register uart_a ok
  378. [ 1.996737@0] set uart_b pinmux use pinctrl subsystem
  379. [ 2.001326@0] P_AO_RTI_PIN_MUX_REG:78025861
  380. [ 2.005584@0] start uart_b_ttyS2:(irq = 107)
  381. [ 2.009726@0] register uart_b ok
  382. [ 2.013266@0] start uart_d_ttyS4:(irq = 126)
  383. [ 2.017234@0] register uart_d ok
  384. [ 2.020555@0] dwc_otg: version 3.10a 12-MAY-2014
  385. [ 2.025079@0] dwc_otg lm-root: dwc_otg_driver_probe(ed73c600)
  386. [ 2.025094@0] dwc_otg_driver_probe NOT match
  387. [ 2.029240@0] dwc_otg lm1: dwc_otg_driver_probe(ed73c800)
  388. [ 2.029267@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
  389. [ 2.037852@0] USB (1) use clock source: XTAL input
  390. [ 2.043610@0] dwc_otg lm1: base=0xfe080000
  391. [ 2.043625@0] dwc_otg lm1: dwc_otg_device=0xecea0400
  392. [ 2.063756@0] Core Release: 3.10a
  393. [ 2.063796@0] Setting default values for core params
  394. [ 2.066445@0] curmode: 1, host_only: 1
  395. [ 2.070119@0] dwc_otg lm1: DMA config: BURST_DEFAULT
  396. [ 2.090356@0] Using Buffer DMA mode
  397. [ 2.090395@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  398. [ 2.092719@0] Working on port type = HOST
  399. [ 2.098054@0] dwc_otg lm1: DWC OTG Controller
  400. [ 2.101064@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
  401. [ 2.107823@0] dwc_otg lm1: irq 63, io mem 0x00000000
  402. [ 2.112635@0] -------hcd->flags.d32 = 0
  403. [ 2.116522@0] Init: Port Power? op_state=1
  404. [ 2.120513@0] Init1: Power Port (0)
  405. [ 2.124825@0] hub 1-0:1.0: USB hub found
  406. [ 2.127964@0] hub 1-0:1.0: 1 port detected
  407. [ 2.132298@0] dwc_otg lm0: dwc_otg_driver_probe(ed73ca00)
  408. [ 2.132329@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
  409. [ 2.140607@0] USB (0) use clock source: XTAL input
  410. [ 2.146344@0] dwc_otg lm0: base=0xfe040000
  411. [ 2.146360@0] dwc_otg lm0: dwc_otg_device=0xed92ed00
  412. [ 2.166502@0] Core Release: 3.10a
  413. [ 2.166541@0] Setting default values for core params
  414. [ 2.169131@0] curmode: 1, host_only: 0
  415. [ 2.212860@0] dwc_otg lm0: DMA config: BURST_DEFAULT
  416. [ 2.233098@0] Using Buffer DMA mode
  417. [ 2.233135@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  418. [ 2.235509@0] Working on port type = OTG
  419. [ 2.239369@0] Current port type: SLAVE
  420. [ 2.243322@0] dwc_otg lm0: DWC OTG Controller
  421. [ 2.247497@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
  422. [ 2.254108@0] dwc_otg lm0: irq 62, io mem 0x00000000
  423. [ 2.259818@0] hub 2-0:1.0: USB hub found
  424. [ 2.262934@0] hub 2-0:1.0: 1 port detected
  425. [ 2.267356@0] Dedicated Tx FIFOs mode
  426. [ 2.271057@0] using timer detect id change, ecec0000
  427. [ 2.275870@0] boot_device_flag : -1
  428. [ 2.279012@0] do not init nand
  429. [ 2.282108@0] amvideocap_init_module
  430. [ 2.285875@0] Amlogic A/V streaming port init
  431. [ 2.291735@0] buffersize=262144,0,start=0
  432. [ 2.293919@0] Subtitle stbuf alloced at 0xecf00000, size = 262144
  433. [ 2.300036@0] changed the (2) buffer size from 0 to 262144
  434. [ 2.305738@0] init vdec memsource 7a00000->b9fffff
  435. [ 2.310330@0] [tsync_pcr_init]init success.
  436. [ 2.314508@0] regist mpeg12 codec profile
  437. [ 2.318554@0] regist mpeg4 codec profile
  438. [ 2.322321@0] amvdec_vc1 module init
  439. [ 2.325979@1] Indeed it is in host mode hprt0 = 00041901
  440. [ 2.326004@0] regist vc1 codec profile
  441. [ 2.326007@0] amvdec_h264 module init
  442. [ 2.326124@0] regist h264 codec profile
  443. [ 2.326127@0] amvdec_h264mvc module init
  444. [ 2.326194@0] regist hmvc codec profile
  445. [ 2.326197@0] amvdec_h265 module init
  446. [ 2.326263@0] regist hevc codec profile
  447. [ 2.326328@0] regist mjpeg codec profile
  448. [ 2.326331@0] amvdec_real module init
  449. [ 2.326396@0] regist real codec profile
  450. [ 2.326399@0] amvdec_avs module init
  451. [ 2.326573@0] amvenc_avc memory resource undefined.
  452. [ 2.326576@0] encode_wq_init.
  453. [ 2.326590@0] encode start monitor.
  454. [ 2.326715@2] encode workqueue monitor start.
  455. [ 2.327048@0] jpegenc module init
  456. [ 2.327388@0] alloc_keep_buffer keep_y_addr eca00000
  457. [ 2.327410@0] alloc_keep_buffer keep_u_addr ed000000
  458. [ 2.327422@0] alloc_keep_buffer keep_v_addr ecf80000
  459. [ 2.327427@0] yaddr=eca00000,u_addr=ed000000,v_addr=ecf80000
  460. [ 2.327864@0] create_ge2d_work_queue video task ok
  461. [ 2.328450@0] efuse===========================================
  462. [ 2.328660@0] efuse: device efuse created
  463. [ 2.328728@0] efuse--------------------------------------------
  464. [ 2.328732@0] SARADC Driver init.
  465. [ 2.328897@0] __saradc_probe__
  466. [ 2.475067@0] saradc calibration: ref_val = 508
  467. [ 2.475116@0] saradc calibration: ref_nominal = 512
  468. [ 2.478815@0] saradc calibration: coef = 4120
  469. [ 2.483509@0] ir irblaster probe
  470. [ 2.486677@0] Remote Driver
  471. [ 2.489297@0] Remote platform_data g_remote_base=fe600580
  472. [ 2.494525@0] set drvdata completed
  473. [ 2.498115@0] device_create_file completed
  474. [ 2.502997@0] input: aml_keypad as /devices/platform/meson-remote/input/input0
  475. [ 2.509953@0] input_register_device completed
  476. [ 2.514033@0] [0x0] = 0x1dd0190
  477. [ 2.517153@0] [0x4] = 0xf800ca
  478. [ 2.520118@0] [0x8] = 0x96005a
  479. [ 2.523190@0] [0xc] = 0x3c0030
  480. [ 2.526229@0] [0x10] = 0x30fa0013
  481. [ 2.529470@0] [0x18] = 0x6f19000
  482. [ 2.532673@0] [0x1c] = 0x9f40
  483. [ 2.535664@0] [0x20] = 0x0
  484. [ 2.538338@0] [0x24] = 0x0
  485. [ 2.540985@0] [0x28] = 0x0
  486. [ 2.543670@0] set_remote_mode[65]
  487. [ 2.547037@0] remote config major:239
  488. [ 2.550908@0] physical address:0x2d0fe000
  489. [ 2.554738@0] ADC Keypad Driver init.
  490. [ 2.558568@0] ==touch_ts_init==
  491. [ 2.561561@0] ==ft5x0x_ts_init==
  492. [ 2.564669@0] ==goodix_ts_init==
  493. [ 2.567971@0] i2c-core: driver [gslx680_compatible] using legacy suspend method
  494. [ 2.575180@0] i2c-core: driver [gslx680_compatible] using legacy resume method
  495. [ 2.582337@0] !!!ntp_ts: ret = 0.
  496. [ 2.585722@0] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
  497. [ 2.592154@0] i2c-core: driver [ct36x] using legacy suspend method
  498. [ 2.598272@0] i2c-core: driver [ct36x] using legacy resume method
  499. [ 2.604284@0] VTL ct36x TouchScreen driver End.
  500. [ 2.608855@3] ==gsl_ts_init==
  501. [ 2.611788@3] ret=0
  502. [ 2.614070@3] i2c-core: driver [mir3da] using legacy suspend method
  503. [ 2.614972@1] usb 1-1: new low-speed USB device number 2 using dwc_otg
  504. [ 2.615906@0] Indeed it is in host mode hprt0 = 00041901
  505. [ 2.631845@3] i2c-core: driver [mir3da] using legacy resume method
  506. [ 2.638030@3] i2c-core: driver [lis3dh_acc] using legacy suspend method
  507. [ 2.644545@3] i2c-core: driver [lis3dh_acc] using legacy resume method
  508. [ 2.651136@3] i2c-core: driver [bma222] using legacy suspend method
  509. [ 2.657292@3] i2c-core: driver [bma222] using legacy resume method
  510. [ 2.663503@3] i2c-core: driver [dmard06] using legacy suspend method
  511. [ 2.669759@3] i2c-core: driver [dmard06] using legacy resume method
  512. [ 2.676069@3] lsm303d driver: init
  513. [ 2.679430@3] i2c-core: driver [dmard10] using legacy suspend method
  514. [ 2.685692@3] i2c-core: driver [dmard10] using legacy resume method
  515. [ 2.691954@3] stk8313_init
  516. [ 2.694632@3] ======stk831x init ok======
  517. [ 2.698593@3] stk831x_init
  518. [ 2.701303@3] mxc622x accelerometer driver: init
  519. [ 2.705905@3] i2c-core: driver [mxc622x] using legacy suspend method
  520. [ 2.712170@3] i2c-core: driver [mxc622x] using legacy resume method
  521. [ 2.718423@3] mxc6255xc accelerometer driver: init
  522. [ 2.723207@3] i2c-core: driver [mxc6255xc] using legacy suspend method
  523. [ 2.729678@3] i2c-core: driver [mxc6255xc] using legacy resume method
  524. [ 2.736203@3] cm3217 v.1.0.0.1
  525. [ 2.739148@3] i2c-core: driver [elan_epl6814] using legacy suspend method
  526. [ 2.745871@3] i2c-core: driver [elan_epl6814] using legacy resume method
  527. [ 2.752565@3] i2c-core: driver [LTR501] using legacy suspend method
  528. [ 2.758771@3] i2c-core: driver [LTR501] using legacy resume method
  529. [ 2.765040@3] GPIO Keypad Driver init.
  530. [ 2.768743@3] ==gpio_key_probe==
  531. [ 2.771869@3] reg:2620,clearmask=400040,setmask=1
  532. [ 2.776593@3] reg:2622,clearmask=ff0000,set pin=3
  533. [ 2.781269@3] reg:2623,clearmask=7000000,setmask=7
  534. [ 2.786054@3] reg:2620,clearmask=800080,setmask=10001
  535. [ 2.791140@3] reg:2622,clearmask=ff000000,set pin=3
  536. [ 2.795989@3] reg:2623,clearmask=70000000,setmask=7
  537. [ 2.800903@3] power key(116) registed.
  538. [ 2.800910@0] key 116 up
  539. [ 2.807344@3] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input1
  540. [ 2.814644@3] gpio keypad register input device completed.
  541. [ 2.820007@3] gpio keypad major:238
  542. [ 2.823883@3] spi_nor_init
  543. [ 2.826418@3] amlogic_spi_nor_probe:
  544. [ 2.829800@3] amlogic_spi->state_name:default
  545. [ 2.834313@3] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
  546. [ 2.834769@0] input: HID 04f3:0103 as /devices/lm1/usb1/1-1/1-1:1.0/input/input2
  547. [ 2.849205@0] hid-generic 0003:04F3:0103.0001: input: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-lm1-1/input0
  548. [ 2.849249@3] check_storage_device : spi boot_device_flag : -1
  549. [ 2.849252@3] spi_nor_probe
  550. [ 2.849258@3] spi_nor_probe 629 boot_device_flag 2 : do not init spi
  551. [ 2.849273@3] spi_nor: probe of apollospi:32766 failed with error -12
  552. [ 2.849281@3] amlogic_spi_nor_probe over
  553. [ 2.849448@3] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  554. [ 2.894520@3] host->base fe108c20
  555. [ 2.897119@3] pdata->caps 7
  556. [ 2.899809@3] pdata->caps2 0
  557. [ 2.902094@0] input: HID 04f3:0103 as /devices/lm1/usb1/1-1/1-1:1.1/input/input3
  558. [ 2.910137@3] get property: port, value:0x00000001
  559. [ 2.910238@0] hid-generic 0003:04F3:0103.0002: input: USB HID v1.11 Device [HID 04f3:0103] on usb-lm1-1/input1
  560. [ 2.926501@3] get property: ocr_avail, value:0x00200000
  561. [ 2.932972@3] get property: f_min, value:0x000493e0
  562. [ 2.939483@3] get property: f_max, value:0x02faf080
  563. [ 2.945974@3] get property: f_max_w, value:0x02faf080
  564. [ 2.952454@3] get property: max_req_size, value:0x00020000
  565. [ 2.958962@3] get property: irq_in, value:0x00000003
  566. [ 2.965456@3] get property: irq_out, value:0x00000005
  567. [ 2.971947@3] get property: gpio_cd, str:CARD_6
  568. [ 2.977929@3] get property: pinname, str:sd
  569. [ 2.983542@3] get property: jtag_pin, str:CARD_0
  570. [ 2.989529@3] get property: card_type, value:0x00000005
  571. [ 2.996025@3] get property: gpio_dat3, str:CARD_4
  572. [ 3.002005@3] normal card in
  573. [ 3.045065@0] reg:2620,clearmask=80008,setmask=10001
  574. [ 3.045114@0] reg:2621,clearmask=ff000000,set pin=49
  575. [ 3.049419@0] reg:2623,clearmask=7000,setmask=7
  576. [ 3.053988@0] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
  577. [ 3.060625@1] reg:2620,clearmask=200020,setmask=1
  578. [ 3.065266@1] reg:2622,clearmask=ff00,set pin=49
  579. [ 3.069854@1] reg:2623,clearmask=700000,setmask=7
  580. [ 3.074850@1] pdata->caps 10f
  581. [ 3.077500@1] pdata->caps2 0
  582. [ 3.080333@1] get property: port, value:0x00000000
  583. [ 3.086873@1] get property: ocr_avail, value:0x00200000
  584. [ 3.093320@1] get property: f_min, value:0x000493e0
  585. [ 3.093960@0] sd: new high speed SDHC card at address 59b4, clock 39843750, 4-bit-bus-width
  586. [ 3.108230@1] get property: f_max, value:0x02faf080
  587. [ 3.108253@0] mmcblk0: sd:59b4 00000 3.67 GiB
  588. [ 3.109612@0] mmcblk0: p1
  589. [ 3.121745@1] get property: max_req_size, value:0x00020000
  590. [ 3.128247@1] get property: pinname, str:sdio
  591. [ 3.134018@1] get property: card_type, value:0x00000003
  592. [ 3.234934@1] [aml_sdio_probe] aml_sdio_probe() success!
  593. [ 3.236450@1] host->base fe108e00
  594. [ 3.237990@1] pdata->caps 80000547
  595. [ 3.241286@1] pdata->caps2 20
  596. [ 3.244227@1] get property: port, value:0x00000005
  597. [ 3.250748@1] get property: ocr_avail, value:0x00200000
  598. [ 3.257229@1] get property: f_min, value:0x000493e0
  599. [ 3.263708@1] get property: f_max, value:0x05f5e100
  600. [ 3.270217@1] get property: max_req_size, value:0x00020000
  601. [ 3.276716@1] get property: pinname, str:emmc
  602. [ 3.282498@1] get property: card_type, value:0x00000001
  603. [ 3.289012@1] get property: gpio_dat3, str:BOOT_3
  604. [ 3.294982@1] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3
  605. [ 3.334969@0] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
  606. [ 3.336129@0] aml_emmc_hw_reset 1329
  607. [ 3.347701@2] mmc_init_card
  608. [ 3.394934@1] [aml_sdhc_probe] aml_sdhc_probe() success!
  609. [ 3.395118@1] [dsp]DSP start addr 0xc5e00000
  610. [ 3.398893@1] [dsp]register dsp to char divece(257)
  611. [ 3.404213@1] amlogic audio spdif interface device init!
  612. [ 3.409108@1] device name=nand_key open error
  613. [ 3.413403@1] aml_keys: version 0 can not be init c0ae6554
  614. [ 3.418875@1] device name=emmc_key open error
  615. [ 3.423272@1] aml_keys: version 0 can not be init c0ae6554
  616. [ 3.429588@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
  617. [ 3.435713@1] [AML1216]call aml1216_battery_init, ret = 0
  618. [ 3.435798@1] [AML1218]call aml1218_battery_init, ret = 0
  619. [ 3.435875@1] [RN5T618]call rn5t618_battery_init, ret = 0
  620. [ 3.435917@1] vdin_drv_init: major 236
  621. [ 3.438668@1] amvdec_656in module: init.
  622. [ 3.442421@1] amvdec_656in_init_module:major 235
  623. [ 3.447494@1] amvdec_656in probe ok.
  624. [ 3.450992@1] amvdec_csi probe ok.
  625. [ 3.453956@1] [viuin..]viuin_init_module viuin module init
  626. [ 3.459627@1] [viuin..]viuin_probe probe ok.
  627. [ 3.465134@1] amaudio2: device amaudio2 created
  628. [ 3.469337@1] Error: Didn't get power valid value --- wifi_power_probe 323
  629. [ 3.474995@1] wifi_power power_gpio is 6
  630. [ 3.478866@1] wifi_power power_gpio2 is 108
  631. [ 3.483353@1] bcmdhd_wlan_init()
  632. [ 3.486256@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ed6d5300, size=3760
  633. [ 3.493240@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ed6d53c0, size=3760
  634. [ 3.500270@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ed6d5480, size=3760
  635. [ 3.507282@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ed6d5540, size=3760
  636. [ 3.514281@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ed6d5600, size=3760
  637. [ 3.521309@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ed6d56c0, size=3760
  638. [ 3.528323@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ed6d5780, size=3760
  639. [ 3.535336@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ed6d5840, size=3760
  640. [ 3.540501@2] emmc: BKOPS_EN bit is not set
  641. [ 3.540504@2] ###check hw reset function is already enabled here
  642. [ 3.541273@2] Activate high speed
  643. [ 3.555057@2] emmc: new HS200 MMC card at address 0001, clock 85000000, 8-bit-bus-width
  644. [ 3.563826@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ed6d5900, size=7856
  645. [ 3.563847@2] mmcblk1: emmc:0001 NCard 7.21 GiB
  646. [ 3.575491@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ed6d59c0, size=7856
  647. [ 3.575510@2] mmcblk1boot0: emmc:0001 NCard partition 1 4.00 MiB
  648. [ 3.588559@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ed6d5a80, size=7856
  649. [ 3.588585@2] mmcblk1boot1: emmc:0001 NCard partition 2 4.00 MiB
  650. [ 3.589689@2] mmcblk1: p1
  651. [ 3.590285@2] Delete invalid mbr partition part ed19d400, part->partno 1
  652. [ 3.590785@2] emmc read lba=0x12000, blocks=0x1 OK!
  653. [ 3.591028@2] emmc read lba=0x12001, blocks=0x1 OK!
  654. [ 3.591035@2] [mmc_read_partition_tbl] mmc read partition OK!
  655. [ 3.591037@2] add_emmc_partition
  656. [ 3.591281@2] [mmcblk1p01] bootloader offset 0x000000000000, size 0x000000400000
  657. [ 3.591517@2] [mmcblk1p02] reserved offset 0x000002400000, size 0x000004000000
  658. [ 3.591736@2] [mmcblk1p03] cache offset 0x000006c00000, size 0x000020000000
  659. [ 3.591965@2] [mmcblk1p04] env offset 0x000027400000, size 0x000000800000
  660. [ 3.592185@2] [mmcblk1p05] logo offset 0x000028400000, size 0x000002000000
  661. [ 3.592428@2] [mmcblk1p06] recovery offset 0x00002ac00000, size 0x000002000000
  662. [ 3.592650@2] [mmcblk1p07] misc offset 0x00002d400000, size 0x000002000000
  663. [ 3.592881@2] [mmcblk1p08] boot offset 0x00002fc00000, size 0x000002000000
  664. [ 3.593105@2] [mmcblk1p09] system offset 0x000032400000, size 0x000040000000
  665. [ 3.593333@2] [mmcblk1p10] data offset 0x000072c00000, size 0x00015b500000
  666. [ 3.593370@2] card key: card_blk_probe.
  667. [ 3.593378@2] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
  668. [ 3.593384@2] i=0,register --- emmc_key
  669. [ 3.593388@2] emmc key: emmc_key_init:450 ok.
  670. [ 3.593437@2] Exit aml_emmc_partition_ops OK.
  671. [ 3.594446@2] mmcblk1boot1: p1
  672. [ 3.594476@2] mmcblk1boot1: p1 start 16065 is beyond EOD, truncated
  673. [ 3.595720@2] mmcblk1boot0: p1
  674. [ 3.595748@2] mmcblk1boot0: p1 start 16065 is beyond EOD, truncated
  675. [ 3.755727@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ed6d5b40, size=7856
  676. [ 3.762799@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ed6d5c00, size=7856
  677. [ 3.769915@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ed6d5cc0, size=7856
  678. [ 3.777006@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ed6d5d80, size=7856
  679. [ 3.784089@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ed6d5e40, size=7856
  680. [ 3.791209@1] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ed6d5f00, size=16048
  681. [ 3.798394@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ed6d5300, size=20504
  682. [ 3.805406@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ed6d53c0, size=20504
  683. [ 3.812407@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ed6d5480, size=81944
  684. [ 3.819438@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ed6d5540, size=163864
  685. [ 3.826533@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ed6d5600, size=20504
  686. [ 3.833532@1] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ec720000, size=65536
  687. [ 3.840907@1] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=ec730000, size=65536
  688. [ 3.848260@1] bcmdhd_init_wlan_mem: WIFI MEM Allocated
  689. [ 3.853355@1] amlogic rfkill init
  690. [ 3.856762@1] enter bt_probe of_node
  691. [ 3.856784@1] not get gpio_en
  692. [ 3.859589@1] not get gpio_wake
  693. [ 3.885077@1] wifi_request_32k_clk : OFF-->ON for bt_rfkill
  694. [ 3.885125@1] clock_32k_pin(107) : (null)
  695. [ 3.889009@1] clock_32k_pin(107) : sdio_wifi
  696. [ 3.995556@1] cam_devs num is 5
  697. [ 3.995589@1] camera ar0543 is not support
  698. [ 3.997147@1] cam_devs num is 5
  699. [ 4.000255@1] camera ov5647 is not support
  700. [ 4.004333@1] cam_devs num is 5
  701. [ 4.007466@1] camera ar0833 is not support
  702. [ 4.012221@1] aml_hw_crypto initialization.
  703. [ 4.016778@1] usbcore: registered new interface driver snd-usb-audio
  704. [ 4.022438@1] enter rt5616_modinit
  705. [ 4.025586@1] dummy_codec_platform_probe
  706. [ 4.029506@1] == ES8323 == es8323_modinit()
  707. [ 4.034176@1] enter aml_i2s_dai_probe
  708. [ 4.034192@1] i2s get no clk src setting in dts, use the default mpll 0
  709. [ 4.040121@1] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
  710. [ 4.048215@1] enter aml_pcm_dai_probe
  711. [ 4.048308@1] [aml-spdif-dai]enter aml_dai_spdif_init
  712. [ 4.053078@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
  713. [ 4.060195@1] audio_set_958_clk, freq=4,
  714. [ 4.064077@1] IEC958 16bit
  715. [ 4.066774@1] hdmitx: audio: aout notify rate 48000
  716. [ 4.071604@1] hdmitx: audio: aout notify size 16
  717. [ 4.076207@1] hdmitx: audio: aout notify format CT_PCM
  718. [ 4.081304@1] hdmitx: audio: audio channel num is 1
  719. [ 4.086202@1] hdmitx: audio: SPDIF
  720. [ 4.089536@1] hdmitx: audio: current VIC: 4
  721. [ 4.093683@1] hdmitx: audio: audio sample rate: 3
  722. [ 4.098377@1] hdmitx: audio: reset audio N para
  723. [ 4.102870@1] hdmitx: audio: PCM out to HDMI
  724. [ 4.107121@1] hdmitx: audio: i2s_to_spdif_flag:1
  725. [ 4.111780@1] hdmitx: audio: Enable audio spdif to HDMI
  726. [ 4.116992@1] hdmitx: audio: Audio Type: PCM
  727. [ 4.121267@1] hdmitx: audio: set audio param
  728. [ 4.125588@1] [aml-spdif-dai]aml_spdif_probe
  729. [ 4.129990@1] test codec rt5616
  730. [ 4.132911@1] test_codec_of_node, node rt5616 disable
  731. [ 4.137953@1] test codec rt5631
  732. [ 4.141049@1] test_codec_of_node, node rt5631 disable
  733. [ 4.146085@1] test codec wm8960
  734. [ 4.149187@1] test_codec_of_node, node wm8960 disable
  735. [ 4.154209@1] test codec dummy_codec
  736. [ 4.157774@1] using external codec, index = 4
  737. [ 4.162088@1] using external dummy codec
  738. [ 4.166165@1] enter spdif_dit_probe
  739. [ 4.169534@1] aml_spdif_unmute
  740. [ 4.172851@1] codec_name = dummy_codec.0
  741. [ 4.176991@0] enter aml_set_bias_level level: 1
  742. [ 4.177029@0] enter aml_set_bias_level level: 1
  743. [ 4.177043@0] enter aml_set_bias_level level: 1
  744. [ 4.177053@0] enter aml_set_bias_level level: 2
  745. [ 4.177128@1] enter aml_asoc_init
  746. [ 4.177176@1] p_aml_audio->hp_disable=1
  747. [ 4.180360@1] falied to get spk event delay time paraments from dts file
  748. [ 4.187048@1] spk_event delay_time = 0
  749. [ 4.192095@1] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288
  750. [ 4.200153@1] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536
  751. [ 4.208470@1] aml_snd_m8 aml_m8_sound_card.4: dummy_codec <-> aml-i2s-dai.0 mapping ok
  752. [ 4.216534@2] enter aml_set_bias_level level: 1
  753. [ 4.216548@2] enter aml_set_bias_level level: 2
  754. [ 4.218095@1] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288
  755. [ 4.225797@1] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536
  756. [ 4.234080@1] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
  757. [ 4.242040@0] enter aml_set_bias_level level: 1
  758. [ 4.242053@0] enter aml_set_bias_level level: 2
  759. [ 4.242158@2] enter aml_set_bias_level level: 1
  760. [ 4.242171@2] enter aml_set_bias_level level: 2
  761. [ 4.243435@2] enter aml_set_bias_level level: 1
  762. [ 4.243448@2] enter aml_set_bias_level level: 2
  763. [ 4.243629@1] -----ext_codec=1---
  764. [ 4.245259@1] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  765. [ 4.251408@1] GACT probability NOT on
  766. [ 4.254830@1] Mirror/redirect action on
  767. [ 4.258670@1] u32 classifier
  768. [ 4.261490@1] Actions configured
  769. [ 4.265062@1] Netfilter messages via NETLINK v0.30.
  770. [ 4.269961@1] nf_conntrack version 0.5.0 (13037 buckets, 52148 max)
  771. [ 4.276941@1] ctnetlink v0.93: registering with nfnetlink.
  772. [ 4.281680@1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  773. [ 4.288704@1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  774. [ 4.295175@1] xt_time: kernel timezone is -0000
  775. [ 4.299555@1] ip_tables: (C) 2000-2006 Netfilter Core Team
  776. [ 4.304869@1] arp_tables: (C) 2002 David S. Miller
  777. [ 4.309466@1] TCP: cubic registered
  778. [ 4.313575@1] NET: Registered protocol family 10
  779. [ 4.318448@1] mip6: Mobile IPv6
  780. [ 4.320584@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
  781. [ 4.326428@1] sit: IPv6 over IPv4 tunneling driver
  782. [ 4.332281@1] NET: Registered protocol family 17
  783. [ 4.335512@1] NET: Registered protocol family 15
  784. [ 4.340143@1] Bridge firewalling registered
  785. [ 4.344358@1] Bluetooth: RFCOMM TTY layer initialized
  786. [ 4.349280@1] Bluetooth: RFCOMM socket layer initialized
  787. [ 4.354489@1] Bluetooth: RFCOMM ver 1.11
  788. [ 4.358414@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  789. [ 4.363840@1] Bluetooth: BNEP filters: protocol multicast
  790. [ 4.369238@1] Bluetooth: BNEP socket layer initialized
  791. [ 4.374318@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  792. [ 4.380403@1] Bluetooth: HIDP socket layer initialized
  793. [ 4.385594@1] NET: Registered protocol family 35
  794. [ 4.390182@1] Key type dns_resolver registered
  795. [ 4.395397@1] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  796. [ 4.402312@1] Registering SWP/SWPB emulation handler
  797. [ 4.407252@1] enter meson_pm_init
  798. [ 4.411167@1] enter meson_pm_probe!
  799. [ 4.413994@1] ---meson_pm_probe----set output pin success
  800. [ 4.419393@1] hdmi: cec_pm: cec config:0xf
  801. [ 4.423411@1] meson_pm_probe done !
  802. [ 4.426940@1] AO cpu runs ok.
  803. [ 4.431058@1] file system registered
  804. [ 4.434991@1] android_usb gadget: Mass Storage Function, version: 2009/09/11
  805. [ 4.440385@1] android_usb gadget: Number of LUNs=2
  806. [ 4.445176@1] lun0: LUN: removable file: (no medium)
  807. [ 4.450170@1] lun1: LUN: removable file: (no medium)
  808. [ 4.455592@1] android_usb gadget: android_usb ready
  809. [ 4.460138@1] AO cpu stop ok.
  810. [ 4.463365@1] AO cpu runs ok.
  811. [ 4.465985@1] aml_rtc rtc.0: setting system clock to 2016-06-22 18:56:30 UTC (1466621790)
  812. [ 4.474097@1] ### dt-test ### No testcase data in device tree; not running tests
  813. [ 4.481615@1] meson_cpufreq_probe:SYSPLL request to be fixed
  814. [ 4.487073@1] meson_cpufreq: no voltage_control prop
  815. [ 4.491989@1] voltage_control = 0
  816. [ 4.496194@1] <<-GTP-INFO->> GTP driver installing...
  817. [ 4.500418@1] hdmitx: cec: CEC init
  818. [ 4.503824@2] hdmitx: cec: CEC task process
  819. [ 4.503971@1] input: cec_input as /devices/virtual/input/input4
  820. [ 4.513914@1] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
  821. [ 4.519311@1] ALSA device list:
  822. [ 4.522554@1] #0: AML-M8AUDIO
  823. [ 4.526061@1] config uart_ao_ttyS0:: Character length 8bits/char
  824. [ 4.544920@1] Changing uart_ao_ttyS0: baud from 0 to 115200
  825. [ 4.565130@1] Freeing unused kernel memory: 224K (c0a66000 - c0a9e000)
  826. [ 4.589223@2] SELinux: 512 avtab hash slots, 1330 rules.
  827. [ 4.589859@2] SELinux: 512 avtab hash slots, 1330 rules.
  828. [ 4.589877@2] SELinux: 1 users, 2 roles, 291 types, 1 bools, 1 sens, 1024 cats
  829. [ 4.589886@2] SELinux: 84 classes, 1330 rules
  830. [ 4.590851@2] SELinux: Permission attach_queue in class tun_socket not defined in policy.
  831. [ 4.593480@2] SELinux: the above unknown classes and permissions will be denied
  832. [ 4.600820@2] SELinux: Completing initialization.
  833. [ 4.600826@2] SELinux: Setting up existing superblocks.
  834. [ 4.600848@2] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  835. [ 4.600865@2] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  836. [ 4.600905@2] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  837. [ 4.600917@2] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  838. [ 4.600938@2] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  839. [ 4.600961@2] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
  840. [ 4.602683@2] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  841. [ 4.602854@2] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  842. [ 4.602868@2] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  843. [ 4.602878@2] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  844. [ 4.602890@2] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  845. [ 4.602914@2] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  846. [ 4.602973@2] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  847. [ 4.603005@2] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  848. [ 4.799439@2] type=1403 audit(1466621790.820:2): policy loaded auid=4294967295 ses=4294967295
  849. [ 4.802464@2] SELinux: Loaded policy from /sepolicy
  850. [ 4.809663@2] type=1404 audit(1466621790.830:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  851. [ 6.308303@2] init: init.amlogic.board.rc: 72: ignored duplicate definition of service 'ril-daemon'
  852. [ 6.311731@2] init: init.amlogic.board.rc: 79: ignored duplicate definition of service 'pppd_gprs'
  853. [ 6.321056@2] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  854. [ 6.330350@2] init: command 'loglevel' r=0
  855. [ 6.333645@2] init: command 'mount' r=0
  856. [ 6.340585@2] aml_nftl_dev: module license 'Proprietary' taints kernel.
  857. [ 6.343932@2] Disabling lock debugging due to kernel taint
  858. [ 6.350231@2] boot_device_flag : -1
  859. [ 6.353077@2] init: command 'insmod' r=0
  860. [ 6.356895@2] init: mount none to target failed
  861. [ 6.361308@2] init: command 'mount' r=0
  862. [ 6.383677@0] gpu cooling register okay with err=0
  863. [ 6.383766@0] gpu core cooling register okay with err=0
  864. [ 6.388246@0] Mali: Mali device driver loaded
  865. [ 6.393062@0] init: command 'insmod' r=0
  866. [ 6.396407@0] init: processing action 0xa6d88 (early-init)
  867. [ 6.401811@0] init: command 'insmod' r=-1
  868. [ 6.406065@0] init: processing action 0xa85c8 (wait_for_coldboot_done)
  869. [ 6.412313@0] init: wait for /dev/.coldboot_done
  870. [ 7.417126@0] init: command 'wait_for_coldboot_done' r=0
  871. [ 7.417185@0] init: processing action 0xa8610 (mix_hwrng_into_linux_rng)
  872. [ 7.423574@0] init: /dev/hw_random not found
  873. [ 7.427808@0] init: command 'mix_hwrng_into_linux_rng' r=0
  874. [ 7.433238@0] init: processing action 0xa8658 (keychord_init)
  875. [ 7.439038@0] init: command 'keychord_init' r=0
  876. [ 7.443493@0] init: processing action 0xa86a0 (console_init)
  877. [ 7.449502@0] config uart_ao_ttyS0:: Character length 8bits/char
  878. [ 7.449581@0] init: command 'console_init' r=0
  879. [ 7.449629@0] init: processing action 0x91fc8 (init)
  880. [ 7.453362@0] init: command 'sysclktz' r=0
  881. [ 7.458071@0] init: mount none to target failed
  882. [ 7.462151@0] init: mount none to target failed
  883. [ 7.466667@0] init: mount none to target failed
  884. [ 7.472696@0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  885. [ 7.472990@0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  886. [ 7.474573@0] init: mount none to target failed
  887. [ 7.477817@0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  888. [ 7.478572@0] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
  889. [ 7.481843@1] force enable DISCARD here for ext4 fs
  890. [ 7.486129@1] checked enable EXT4 DISCARD here
  891. [ 7.486162@1] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  892. [ 7.494568@1] SELinux: initialized (dev mmcblk1p9, type ext4), uses xattr
  893. [ 7.495325@1] force enable DISCARD here for ext4 fs
  894. [ 7.499417@1] EXT4-fs (mmcblk1p10): Ignoring removed nomblk_io_submit option
  895. [ 7.517312@1] EXT4-fs (mmcblk1p10): ext4_orphan_cleanup: deleting unreferenced inode 32399
  896. [ 7.517733@1] EXT4-fs (mmcblk1p10): ext4_orphan_cleanup: deleting unreferenced inode 32401
  897. [ 7.518242@1] EXT4-fs (mmcblk1p10): ext4_orphan_cleanup: deleting unreferenced inode 32400
  898. [ 7.519605@1] EXT4-fs (mmcblk1p10): ext4_orphan_cleanup: deleting unreferenced inode 16753
  899. [ 7.520129@1] EXT4-fs (mmcblk1p10): ext4_orphan_cleanup: deleting unreferenced inode 16750
  900. [ 7.520196@1] EXT4-fs (mmcblk1p10): 5 orphan inodes deleted
  901. [ 7.520227@1] EXT4-fs (mmcblk1p10): recovery complete
  902. [ 7.539988@1] checked enable EXT4 DISCARD here
  903. [ 7.540022@1] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  904. [ 7.549613@1] SELinux: initialized (dev mmcblk1p10, type ext4), uses xattr
  905. [ 7.551134@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/data
  906. [ 7.576499@1] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  907. [ 7.576568@1] e2fsck: /dev/block/data: clean, 4273/356224 files, 161277/1422592 blocks
  908. [ 7.584153@1] force enable DISCARD here for ext4 fs
  909. [ 7.593274@1] checked enable EXT4 DISCARD here
  910. [ 7.593307@1] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  911. [ 7.602022@1] SELinux: initialized (dev mmcblk1p10, type ext4), uses xattr
  912. [ 7.602661@1] force enable DISCARD here for ext4 fs
  913. [ 7.606852@1] EXT4-fs (mmcblk1p3): Ignoring removed nomblk_io_submit option
  914. [ 7.618590@1] checked enable EXT4 DISCARD here
  915. [ 7.618622@1] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  916. [ 7.628940@1] SELinux: initialized (dev mmcblk1p3, type ext4), uses xattr
  917. [ 7.630294@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache
  918. [ 7.641737@1] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  919. [ 7.641790@1] e2fsck: /dev/block/cache: clean, 18/32768 files, 4348/131072 blocks
  920. [ 7.648997@1] force enable DISCARD here for ext4 fs
  921. [ 7.657974@1] checked enable EXT4 DISCARD here
  922. [ 7.658007@1] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  923. [ 7.666741@1] SELinux: initialized (dev mmcblk1p3, type ext4), uses xattr
  924. [ 7.667177@0] name=emmc_key nand_key
  925. [ 7.670260@0] device name=nand_key open error
  926. [ 7.674722@0] aml_keys: version 0 can not be init c0ae6554
  927. [ 7.680199@0] name=emmc_key emmc_key
  928. [ 7.686408@2] emmc read lba=0x12020, blocks=0x100 OK!
  929. [ 7.691266@2] emmc read lba=0x12120, blocks=0x100 OK!
  930. [ 7.693782@2] register_aes_algorithm:489,new way
  931. [ 7.732566@2] xpad: Unknown symbol led_classdev_unregister (err 0)
  932. [ 7.733145@2] xpad: Unknown symbol input_ff_create_memless (err 0)
  933. [ 7.739294@2] xpad: Unknown symbol led_classdev_register (err 0)
  934. [ 7.748475@2] init: /dev/hw_random not found
  935. [ 7.769066@0] type=1400 audit(1466621793.790:4): avc: denied { entrypoint } for pid=119 comm="init" path="/sbin/healthd" dev="rootfs" ino=67 scontext=u:r:healthd:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  936. [ 7.782409@3] config uart_ao_ttyS0:: Character length 8bits/char
  937. [ 7.783715@0] healthd: No charger supplies found
  938. [ 7.783758@0] healthd: BatteryStatusPath not found
  939. [ 7.787559@0] healthd: BatteryHealthPath not found
  940. [ 7.792317@0] healthd: BatteryPresentPath not found
  941. [ 7.797181@0] healthd: BatteryCapacityPath not found
  942. [ 7.802088@0] healthd: BatteryVoltagePath not found
  943. [ 7.807048@0] healthd: BatteryTemperaturePath not found
  944. [ 7.812175@0] healthd: BatteryTechnologyPath not found
  945. [ 7.817369@0] binder: 119:119 transaction failed 29189, size 0-0
  946. [ 7.826333@1] init: data_integrity_guard main!
  947. [ 7.827719@1] init: is_support_system_bak sup_sys_bak:0
  948. [ 7.845794@3] video first pts = 0
  949. [ 7.846427@3] enter aml_set_bias_level level: 1
  950. [ 7.846435@3] enter aml_set_bias_level level: 2
  951. [ 7.846797@3] enter aml_set_bias_level level: 1
  952. [ 7.846806@3] enter aml_set_bias_level level: 2
  953. [ 7.846932@3] IEC958 16bit
  954. [ 7.846955@3] hdmitx: audio: aout notify rate 48000
  955. [ 7.851034@3] hdmitx: audio: aout notify size 16
  956. [ 7.855711@3] hdmitx: audio: audio channel num is 1
  957. [ 7.856656@0] warning: `su' uses 32-bit capabilities (legacy support in use)
  958. [ 7.867832@3] hdmitx: audio: SPDIF
  959. [ 7.870926@3] hdmitx: audio: current VIC: 4
  960. [ 7.875152@3] hdmitx: audio: audio sample rate: 3
  961. [ 7.879894@3] hdmitx: audio: reset audio N para
  962. [ 7.884388@3] hdmitx: audio: PCM out to HDMI
  963. [ 7.888930@3] hdmitx: audio: i2s_to_spdif_flag:1
  964. [ 7.893419@3] hdmitx: audio: Enable audio spdif to HDMI
  965. [ 7.898626@3] hdmitx: audio: Audio Type: PCM
  966. [ 7.904289@3] hdmitx: audio: set audio param
  967. [ 7.954733@0] zram: Initialization done!
  968. [ 7.970632@2] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS
  969. [ 8.009112@1] EXT4-fs (mmcblk1p9): re-mounted. Opts: (null)
  970. [ 8.329515@2] EXT4-fs (mmcblk1p9): re-mounted. Opts: (null)
  971. [ 8.331919@3] buf[0]=2f,buf[1]=b2,err=4
  972. [ 8.333296@3] adc=401,TS_C=15,flag=1
  973. [ 8.336898@3] efuse_flag=a
  974. [ 8.339537@3] amlogic_thermal_probe, this chip is trimmed, use thermal
  975. [ 8.345749@0] EXT4-fs (mmcblk1p9): re-mounted. Opts: (null)
  976. [ 8.351663@3] amlogic-thermal aml_thermal: amlogic thermal probe start
  977. [ 8.359927@2] #thermal-cells=7
  978. [ 8.362015@1] keep_mode is disabled
  979. [ 8.364632@1] pdata->temp_trip_count=4
  980. [ 8.368409@1] temperature=70 on trip point=0
  981. [ 8.372618@1] fixing high_freq=1488001 to 1250000 at trip point 0,level=1
  982. [ 8.378242@0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  983. [ 8.379399@1] fixing low_freq=1488001 to 1250000 at trip point 0,level=1
  984. [ 8.386401@1] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
  985. [ 8.398593@1] cpu[0] core num==3
  986. [ 8.398623@1] gpu[0] core num==2
  987. [ 8.402641@1] temperature=80 on trip point=1
  988. [ 8.403660@1] fixing high_freq=1200001 to 768000 at trip point 1,level=2
  989. [ 8.410346@1] fixing low_freq=1200001 to 768000 at trip point 1,level=2
  990. [ 8.418183@1] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
  991. [ 8.433230@0] cpu[1] core num==2
  992. [ 8.434709@0] gpu[1] core num==2
  993. [ 8.434739@0] temperature=90 on trip point=2
  994. [ 8.438428@2] fixing high_freq=800001 to 768000 at trip point 2,level=2
  995. [ 8.458197@2] fixing low_freq=800001 to 768000 at trip point 2,level=2
  996. [ 8.462841@2] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
  997. [ 8.469702@2] cpu[2] core num==1
  998. [ 8.472607@2] gpu[2] core num==1
  999. [ 8.475393@2] temperature=260 on trip point=3
  1000. [ 8.479972@2] fixing high_freq=-1 to -22 at trip point 3,level=-1
  1001. [ 8.486161@2] fixing low_freq=-1 to -22 at trip point 3,level=-1
  1002. [ 8.492109@2] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
  1003. [ 8.498421@2] cpu[3] core num==-1
  1004. [ 8.501651@2] gpu[3] core num==-1
  1005. [ 8.505677@2] idle interval=1000
  1006. [ 8.507690@2] pdata->name:aml_thermal, pdata:ebbbb000
  1007. [ 8.522004@2] amlogic_thermal_init_from_dts, 998
  1008. [ 8.522051@2] amlogic_thermal_initialize, 1014, pdata:ebbbb000
  1009. [ 8.527861@2] tmp_trip[0].cpu_core_upper=1
  1010. [ 8.531137@2] tmp_trip[1].cpu_core_upper=2
  1011. [ 8.535415@2] tmp_trip[2].cpu_core_upper=3
  1012. [ 8.539311@2] tmp_trip[3].cpu_core_upper=-1
  1013. [ 8.543410@2] aml_thermal bind thermal-cpucore-0 okay !
  1014. [ 8.549664@2] aml_thermal bind thermal-cpufreq-0 okay !
  1015. [ 8.553654@2] tmp_trip[0].gpu_core_upper=0
  1016. [ 8.567362@2] tmp_trip[1].gpu_core_upper=0
  1017. [ 8.567374@2] tmp_trip[2].gpu_core_upper=1
  1018. [ 8.567396@2] tmp_trip[3].gpu_core_upper=-1
  1019. [ 8.567408@2] aml_thermal bind thermal-gpucore-0 okay !
  1020. [ 8.567419@2] pdata->tmp_trip[0].gpu_lower_level=1
  1021. [ 8.567421@2] pdata->tmp_trip[0].gpu_upper_level=1
  1022. [ 8.567433@2] pdata->tmp_trip[1].gpu_lower_level=2
  1023. [ 8.567435@2] pdata->tmp_trip[1].gpu_upper_level=2
  1024. [ 8.567445@2] pdata->tmp_trip[2].gpu_lower_level=4
  1025. [ 8.567447@2] pdata->tmp_trip[2].gpu_upper_level=4
  1026. [ 8.567457@2] pdata->tmp_trip[3].gpu_lower_level=-1
  1027. [ 8.567459@2] pdata->tmp_trip[3].gpu_upper_level=-1
  1028. [ 8.567469@2] aml_thermal bind thermal-gpufreq-0 okay !
  1029. [ 8.568010@2] amlogic: Kernel Thermal management registered
  1030. [ 8.568019@2] amlogic-thermal aml_thermal: amlogic thermal probe done
  1031. [ 8.582304@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
  1032. [ 8.582314@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
  1033. [ 8.582325@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
  1034. [ 8.582331@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
  1035. [ 8.582709@0] vfm_map_store:rm default
  1036. [ 8.582756@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  1037. [ 8.583653@0] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  1038. [ 8.583663@0] init: powerctl: cannot expand '${sys.powerctl}'
  1039. [ 8.583697@0] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  1040. [ 8.583705@0] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  1041. [ 8.584791@0] android_usb: already disabled
  1042. [ 8.611044@3] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!