API tools faq
paste
simhavcs

dmesg_6401_4.9_truly_dsi1p_dsi0_18apr2017

simhavcs
Apr 18th, 2017
74
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 62.31 KB | None | 0 0
raw download clone embed print report
  1. [242650] fastboot: download:00a00000
  2. [242970] fastboot: boot
  3. [243010] Power on reason 1
  4. [243020] booting linux @ 0x80208000, ramdisk @ 0x83000000 (2775590)
  5. [243020] Turn off LVDS PANEL.
  6. [ 0.000000] Booting Linux on physical CPU 0x0
  7. [ 0.000000] Linux version 4.9.0-01579-g892f1cf (root@vinaysimha-inf-3-062) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.017
  8. [ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5787d
  9. [ 0.000000] CPU: div instructions available: patching division code
  10. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  11. [ 0.000000] OF: fdt:Machine model: Qualcomm APQ8064/IFC6410
  12. [ 0.000000] Memory policy: Data cache writealloc
  13. [ 0.000000] On node 0 totalpages: 512255
  14. [ 0.000000] free_area_init_node: node 0, pgdat c10a2340, node_mem_map eedfd800
  15. [ 0.000000] Normal zone: 1724 pages used for memmap
  16. [ 0.000000] Normal zone: 0 pages reserved
  17. [ 0.000000] Normal zone: 184576 pages, LIFO batch:31
  18. [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31
  19. [ 0.000000] percpu: Embedded 15 pages/cpu @eed96000 s30720 r8192 d22528 u61440
  20. [ 0.000000] pcpu-alloc: s30720 r8192 d22528 u61440 alloc=15*4096
  21. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510531
  23. [ 0.000000] Kernel command line: console=tty0 console=ttyMSM0,115200n8 root=/dev/disk/by-partlabel/userdata rootwait rw systemd.unit=multi-q
  24. [ 0.000000] log_buf_len: 4194304 bytes
  25. [ 0.000000] early log buf free: 129508(98%)
  26. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  29. [ 0.000000] Memory: 2008432K/2049020K available (8192K kernel code, 731K rwdata, 3132K rodata, 1024K init, 359K bss, 40588K reserved, 0K cm)
  30. [ 0.000000] Virtual kernel memory layout:
  31. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  32. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  33. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  34. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  35. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  36. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  37. [ 0.000000] .text : 0xc0208000 - 0xc0b00000 (9184 kB)
  38. [ 0.000000] .init : 0xc0f00000 - 0xc1000000 (1024 kB)
  39. [ 0.000000] .data : 0xc1000000 - 0xc10b6c78 ( 732 kB)
  40. [ 0.000000] .bss : 0xc10b8000 - 0xc1111e74 ( 360 kB)
  41. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  42. [ 0.000000] Preemptible hierarchical RCU implementation.
  43. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  44. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  45. [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 283149695806 ns
  46. [ 0.000006] sched_clock: 32 bits at 6MHz, resolution 148ns, wraps every 318145725365ns
  47. [ 0.000020] Switching to timer-based delay loop, resolution 148ns
  48. [ 0.000539] Console: colour dummy device 80x30
  49. [ 0.001171] console [tty0] enabled
  50. [ 0.001208] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
  51. [ 0.001257] pid_max: default: 32768 minimum: 301
  52. [ 0.001425] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  53. [ 0.001461] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  54. [ 0.002323] CPU: Testing write buffer coherency: ok
  55. [ 0.002691] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  56. [ 0.002765] Setting up static identity map for 0x80300000 - 0x80300058
  57. [ 0.203843] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  58. [ 0.284769] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  59. [ 0.365669] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  60. [ 0.365925] Brought up 4 CPUs
  61. [ 0.366008] SMP: Total of 4 processors activated (54.00 BogoMIPS).
  62. [ 0.366035] CPU: All CPU(s) started in SVC mode.
  63. [ 0.369006] devtmpfs: initialized
  64. [ 0.389998] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
  65. [ 0.390409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  66. [ 0.390633] pinctrl core: initialized pinctrl subsystem
  67. [ 0.391996] NET: Registered protocol family 16
  68. [ 0.392467] DMA: preallocated 256 KiB pool for atomic coherent allocations
  69. [ 0.415214] cpuidle: using governor menu
  70. [ 0.415956] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  71. [ 0.416000] hw-breakpoint: maximum watchpoint size is 8 bytes.
  72. [ 0.420168] gpio gpiochip0: (800000.pinctrl): added GPIO chardev (254:0)
  73. [ 0.420633] gpiochip_setup_dev: registered GPIOs 0 to 89 on device: gpiochip0 (800000.pinctrl)
  74. [ 0.420685] gpio gpiochip0: (800000.pinctrl): created GPIO range 0->89 ==> 800000.pinctrl PIN 0->89
  75. [ 0.440071] qcom_rpm 108000.rpm: RPM firmware 3.0.16842958
  76. [ 0.453542] irq: no irq domain found for /smsm/wcnss@3 !
  77. [ 0.527219] of_get_named_gpiod_flags: parsed 'gpio' property of node '/soc/regulator-fixed@1[0]' - status (0)
  78. [ 0.527855] s1: Bringing 0uV into 1225000-1225000uV
  79. [ 0.528538] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
  80. [ 0.528581] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator s2
  81. [ 0.528905] s3: Bringing 0uV into 1000000-1000000uV
  82. [ 0.529223] s4: Bringing 0uV into 1800000-1800000uV
  83. [ 0.529557] s7: Bringing 0uV into 1300000-1300000uV
  84. [ 0.529881] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
  85. [ 0.529922] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator s8
  86. [ 0.530316] l1: supplied by s4
  87. [ 0.530783] l2: supplied by s4
  88. [ 0.530865] l2: Bringing 0uV into 1200000-1200000uV
  89. [ 0.531679] l3: Bringing 0uV into 3050000-3050000uV
  90. [ 0.532103] l4: Bringing 0uV into 1000000-1000000uV
  91. [ 0.532537] l5: Bringing 0uV into 2750000-2750000uV
  92. [ 0.533011] l6: Bringing 0uV into 2950000-2950000uV
  93. [ 0.533972] l8: Bringing 0uV into 2800000-2800000uV
  94. [ 0.536357] l12: supplied by s4
  95. [ 0.538609] l16: Bringing 0uV into 2800000-2800000uV
  96. [ 0.540838] l18: supplied by s4
  97. [ 0.543761] l23: Bringing 0uV into 1700000-1700000uV
  98. [ 0.544877] l24: supplied by s1
  99. [ 0.546052] l25: supplied by s1
  100. [ 0.547359] l26: supplied by s7
  101. [ 0.547441] l26: Bringing 0uV into 375000-375000uV
  102. [ 0.548625] l27: supplied by s7
  103. [ 0.549886] l28: supplied by s7
  104. [ 0.552434] lvs1: supplied by s4
  105. [ 0.553792] lvs2: supplied by s1
  106. [ 0.555193] lvs3: supplied by s4
  107. [ 0.556690] lvs4: supplied by s4
  108. [ 0.558153] lvs5: supplied by s4
  109. [ 0.559626] lvs6: supplied by s4
  110. [ 0.561134] lvs7: supplied by s4
  111. [ 0.565690] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property
  112. [ 0.565735] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator ncp
  113. [ 0.567912] msm_iommu 7500000.iommu: could not get smmu_pclk
  114. [ 0.568038] msm_iommu 7600000.iommu: could not get smmu_pclk
  115. [ 0.568159] msm_iommu 7c00000.iommu: could not get smmu_pclk
  116. [ 0.568279] msm_iommu 7d00000.iommu: could not get smmu_pclk
  117. [ 0.568625] vgaarb: loaded
  118. [ 0.569535] SCSI subsystem initialized
  119. [ 0.569804] libata version 3.00 loaded.
  120. [ 0.570155] usbcore: registered new interface driver usbfs
  121. [ 0.570261] usbcore: registered new interface driver hub
  122. [ 0.570398] usbcore: registered new device driver usb
  123. [ 0.570564] Linux video capture interface: v2.00
  124. [ 0.571593] Advanced Linux Sound Architecture Driver Initialized.
  125. [ 0.573340] clocksource: Switched to clocksource dg_timer
  126. [ 0.657357] NET: Registered protocol family 2
  127. [ 0.658006] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  128. [ 0.658082] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  129. [ 0.658181] TCP: Hash tables configured (established 8192 bind 8192)
  130. [ 0.658255] UDP hash table entries: 512 (order: 2, 16384 bytes)
  131. [ 0.658298] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  132. [ 0.658491] NET: Registered protocol family 1
  133. [ 0.659474] RPC: Registered named UNIX socket transport module.
  134. [ 0.659504] RPC: Registered udp transport module.
  135. [ 0.659527] RPC: Registered tcp transport module.
  136. [ 0.659551] RPC: Registered tcp NFSv4.1 backchannel transport module.
  137. [ 0.659581] PCI: CLS 0 bytes, default 64
  138. [ 0.659926] Trying to unpack rootfs image as initramfs...
  139. [ 0.821089] Freeing initrd memory: 2712K (c3000000 - c32a6000)
  140. [ 0.821671] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available
  141. [ 0.823842] futex hash table entries: 1024 (order: 4, 65536 bytes)
  142. [ 0.824958] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  143. [ 0.835487] NFS: Registering the id_resolver key type
  144. [ 0.835538] Key type id_resolver registered
  145. [ 0.835562] Key type id_legacy registered
  146. [ 0.836214] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
  147. [ 0.837106] fuse init (API version 7.26)
  148. [ 0.840506] bounce: pool size: 64 pages
  149. [ 0.840587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  150. [ 0.840789] io scheduler noop registered
  151. [ 0.840818] io scheduler deadline registered
  152. [ 0.841038] io scheduler cfq registered (default)
  153. [ 0.844379] qcom-pcie 1b500000.pci: GPIO lookup for consumer perst
  154. [ 0.844412] qcom-pcie 1b500000.pci: using device tree for GPIO lookup
  155. [ 0.844446] of_get_named_gpiod_flags: can't parse 'perst-gpios' property of node '/soc/pci@1b500000[0]'
  156. [ 0.844499] of_get_named_gpiod_flags: parsed 'perst-gpio' property of node '/soc/pci@1b500000[0]' - status (0)
  157. [ 0.845497] OF: PCI: host bridge /soc/pci@1b500000 ranges:
  158. [ 0.845554] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x00000000
  159. [ 0.845593] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x00000000
  160. [ 0.953575] qcom-pcie 1b500000.pci: link up
  161. [ 0.953832] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
  162. [ 0.953869] pci_bus 0000:00: root bus resource [bus 00-ff]
  163. [ 0.953899] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
  164. [ 0.953930] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] (bus address [0x00000000-0x07dfffff])
  165. [ 0.954001] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
  166. [ 0.954145] pci 0000:00:00.0: supports D1
  167. [ 0.954172] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  168. [ 0.954540] PCI: bus0: Fast back to back transfers disabled
  169. [ 0.954889] pci 0000:01:00.0: [1969:1083] type 00 class 0x020000
  170. [ 0.955134] pci 0000:01:00.0: reg 0x10: [mem 0x08000000-0x0803ffff 64bit]
  171. [ 0.955239] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x107f]
  172. [ 0.956190] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  173. [ 0.983621] PCI: bus1: Fast back to back transfers disabled
  174. [ 0.983889] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  175. [ 0.983927] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
  176. [ 0.983963] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x0803ffff 64bit]
  177. [ 0.984108] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x107f]
  178. [ 0.984170] pci 0000:00:00.0: PCI bridge to [bus 01]
  179. [ 0.984200] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
  180. [ 0.984234] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  181. [ 0.984346] pci 0000:01:00.0: [Firmware Bug]: VPD access disabled
  182. [ 1.006443] L2 @ QSB rate. Forcing new rate.
  183. [ 1.006814] L2 @ 391500 KHz
  184. [ 1.007221] CPU0 @ 918000 KHz
  185. [ 1.007250] CPU1 @ QSB rate. Forcing new rate.
  186. [ 1.007613] CPU1 @ 391500 KHz
  187. [ 1.007641] CPU2 @ QSB rate. Forcing new rate.
  188. [ 1.007994] CPU2 @ 391500 KHz
  189. [ 1.008023] CPU3 @ QSB rate. Forcing new rate.
  190. [ 1.008376] CPU3 @ 391500 KHz
  191. [ 1.012452] gsbi 12440000.gsbi: GSBI port protocol: 2 crci: 0
  192. [ 1.013752] gsbi 16200000.gsbi: GSBI port protocol: 2 crci: 0
  193. [ 1.014433] gsbi 16300000.gsbi: GSBI port protocol: 2 crci: 0
  194. [ 1.015109] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
  195. [ 1.015856] gsbi 16500000.gsbi: GSBI port protocol: 4 crci: 0
  196. [ 1.017728] gsbi 16600000.gsbi: GSBI port protocol: 6 crci: 0
  197. [ 1.020122] krait0: Bringing 700000uV into 825000-825000uV
  198. [ 1.022384] krait1: Bringing 700000uV into 825000-825000uV
  199. [ 1.024774] krait2: Bringing 700000uV into 825000-825000uV
  200. [ 1.027089] krait3: Bringing 700000uV into 825000-825000uV
  201. [ 1.030462] msm_serial 16540000.serial: msm_serial: detected port #1
  202. [ 1.030594] msm_serial 16540000.serial: uartclk = 27000000
  203. [ 1.030690] 16540000.serial: ttyMSM1 at MMIO 0x16540000 (irq = 178, base_baud = 1687500) is a MSM
  204. [ 1.031497] msm_serial 16640000.serial: msm_serial: detected port #0
  205. [ 1.031624] msm_serial 16640000.serial: uartclk = 1843200
  206. [ 1.031715] 16640000.serial: ttyMSM0 at MMIO 0x16640000 (irq = 180, base_baud = 115200) is a MSM
  207. [ 1.031782] msm_serial: console setup on port #0
  208. [ 2.189719] console [ttyMSM0] enabled
  209. [ 2.194890] msm_serial: driver initialized
  210. [ 2.199308] [drm] Initialized
  211. [ 2.201772] [drm:msm_drm_register] init
  212. [ 2.204883] [drm:msm_mdp_register]
  213. [ 2.208801] [drm:msm_dsi_register]
  214. [ 2.212490] [drm:msm_dsi_pll_28nm_8960_init] 1
  215. [ 2.215557] [drm:dsi_pll_28nm_clk_recalc_rate] returning vco rate = 0
  216. [ 2.220396] [drm:msm_dsi_pll_init] DSI:0 PLL registered
  217. [ 2.226836] [drm:msm_dsi_pll_28nm_8960_init] 2
  218. [ 2.231540] [drm:dsi_pll_28nm_clk_recalc_rate] returning vco rate = 0
  219. [ 2.236550] [drm:msm_dsi_pll_init] DSI:1 PLL registered
  220. [ 2.244831] [drm:msm_edp_register]
  221. [ 2.275036] brd: module loaded
  222. [ 2.286983] loop: module loaded
  223. [ 2.287313] ssbi 500000.qcom,ssbi: SSBI controller type: 'pmic-arbiter'
  224. [ 2.289460] pm8921_probe: PMIC revision 1: F4
  225. [ 2.295653] pm8921_probe: PMIC revision 2: 06
  226. [ 2.309021] gpiochip_find_base: found new base at 468
  227. [ 2.309096] gpio gpiochip1: (500000.qcom,ssbi:pmic@0:gpio@150): added GPIO chardev (254:1)
  228. [ 2.313659] gpiochip_setup_dev: registered GPIOs 468 to 511 on device: gpiochip1 (500000.qcom,ssbi:pmic@0:gpio@150)
  229. [ 2.321256] gpio gpiochip1: (500000.qcom,ssbi:pmic@0:gpio@150): created GPIO range 0->43 ==> 500000.qcom,ssbi:pmic@0:gpio@150 PIN 0->43
  230. [ 2.333665] gpiochip_find_base: found new base at 456
  231. [ 2.343794] gpio gpiochip2: (500000.qcom,ssbi:pmic@0:mpps@50): added GPIO chardev (254:2)
  232. [ 2.349471] gpiochip_setup_dev: registered GPIOs 456 to 467 on device: gpiochip2 (500000.qcom,ssbi:pmic@0:mpps@50)
  233. [ 2.357192] gpio gpiochip2: (500000.qcom,ssbi:pmic@0:mpps@50): created GPIO range 0->11 ==> 500000.qcom,ssbi:pmic@0:mpps@50 PIN 0->11
  234. [ 2.368764] ssbi c00000.qcom,ssbi: SSBI controller type: 'pmic-arbiter'
  235. [ 2.379925] pm8821_probe: PMIC revision 1: F3
  236. [ 2.385904] pm8821_probe: PMIC revision 2: 0B
  237. [ 2.391437] gpiochip_find_base: found new base at 452
  238. [ 2.394759] gpio gpiochip3: (c00000.qcom,ssbi:pmic@1:mpps@50): added GPIO chardev (254:3)
  239. [ 2.400258] gpiochip_setup_dev: registered GPIOs 452 to 455 on device: gpiochip3 (c00000.qcom,ssbi:pmic@1:mpps@50)
  240. [ 2.407972] gpio gpiochip3: (c00000.qcom,ssbi:pmic@1:mpps@50): created GPIO range 0->3 ==> c00000.qcom,ssbi:pmic@1:mpps@50 PIN 0->3
  241. [ 2.418806] SCSI Media Changer driver v0.25
  242. [ 12.433638] qcom-apq8064-sata-phy 1b400000.phy: poll timeout UNIPHY_PLL_STATUS
  243. [ 12.433704] phy phy-1b400000.phy.0: phy init failed --> -110
  244. [ 12.439949] ahci: probe of 29000000.sata failed with error -110
  245. [ 12.447184] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  246. [ 12.451330] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/gsbi@1a200000/spi@1a280000[0]' - status (0)
  247. [ 12.460437] libphy: Fixed MDIO Bus: probed
  248. [ 12.469814] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  249. [ 12.473645] CSLIP: code copyright 1989 Regents of the University of California.
  250. [ 12.483279] usbcore: registered new interface driver ax88179_178a
  251. [ 12.490569] usbcore: registered new interface driver cdc_ether
  252. [ 12.496786] usbcore: registered new interface driver net1080
  253. [ 12.502427] usbcore: registered new interface driver cdc_subset
  254. [ 12.508351] usbcore: registered new interface driver cdc_ncm
  255. [ 12.514281] msm_otg 12500000.phy: GPIO lookup for consumer switch
  256. [ 12.519720] msm_otg 12500000.phy: using device tree for GPIO lookup
  257. [ 12.525800] of_get_named_gpiod_flags: can't parse 'switch-gpios' property of node '/soc/phy@12500000[0]'
  258. [ 12.531800] of_get_named_gpiod_flags: can't parse 'switch-gpio' property of node '/soc/phy@12500000[0]'
  259. [ 12.541603] msm_otg 12500000.phy: using lookup tables for GPIO lookup
  260. [ 12.550697] msm_otg 12500000.phy: lookup for GPIO switch failed
  261. [ 12.557293] msm_otg 12500000.phy: OTG regs = f0cd2000
  262. [ 12.683936] msm_otg 12520000.phy: GPIO lookup for consumer switch
  263. [ 12.683985] msm_otg 12520000.phy: using device tree for GPIO lookup
  264. [ 12.689025] of_get_named_gpiod_flags: can't parse 'switch-gpios' property of node '/soc/phy@12520000[0]'
  265. [ 12.695197] of_get_named_gpiod_flags: can't parse 'switch-gpio' property of node '/soc/phy@12520000[0]'
  266. [ 12.704926] msm_otg 12520000.phy: using lookup tables for GPIO lookup
  267. [ 12.714020] msm_otg 12520000.phy: lookup for GPIO switch failed
  268. [ 12.720539] msm_otg 12520000.phy: OTG regs = f0cd4000
  269. [ 12.843913] msm_otg 12530000.phy: GPIO lookup for consumer switch
  270. [ 12.843963] msm_otg 12530000.phy: using device tree for GPIO lookup
  271. [ 12.849003] of_get_named_gpiod_flags: can't parse 'switch-gpios' property of node '/soc/phy@12530000[0]'
  272. [ 12.855194] of_get_named_gpiod_flags: can't parse 'switch-gpio' property of node '/soc/phy@12530000[0]'
  273. [ 12.864892] msm_otg 12530000.phy: using lookup tables for GPIO lookup
  274. [ 12.873986] msm_otg 12530000.phy: lookup for GPIO switch failed
  275. [ 12.880518] msm_otg 12530000.phy: OTG regs = f0cd6000
  276. [ 13.004370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  277. [ 13.004434] ehci-pci: EHCI PCI platform driver
  278. [ 13.009886] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  279. [ 13.015064] msm_hsusb_host 12520000.usb: EHCI Host Controller
  280. [ 13.020111] msm_hsusb_host 12520000.usb: new USB bus registered, assigned bus number 1
  281. [ 13.025832] msm_hsusb_host 12520000.usb: irq 117, io mem 0x12520000
  282. [ 13.033920] usbcore: registered new interface driver cdc_acm
  283. [ 13.039578] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  284. [ 13.045804] usbcore: registered new interface driver usbserial
  285. [ 13.053271] msm_hsusb_host 12530000.usb: EHCI Host Controller
  286. [ 13.059156] msm_hsusb_host 12530000.usb: new USB bus registered, assigned bus number 2
  287. [ 13.059264] msm_hsusb_host 12530000.usb: irq 118, io mem 0x12530000
  288. [ 13.072801] usbcore: registered new interface driver usbserial_generic
  289. [ 13.079024] msm_hsusb_host 12520000.usb: USB 2.0 started, EHCI 1.00
  290. [ 13.079204] usb usb1: runtime PM trying to activate child device usb1 but parent (12520000.usb) is not active
  291. [ 13.079589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  292. [ 13.079597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  293. [ 13.079604] usb usb1: Product: EHCI Host Controller
  294. [ 13.079610] usb usb1: Manufacturer: Linux 4.9.0-01579-g892f1cf ehci_hcd
  295. [ 13.079615] usb usb1: SerialNumber: 12520000.usb
  296. [ 13.086007] hub 1-0:1.0: USB hub found
  297. [ 13.086084] hub 1-0:1.0: 1 port detected
  298. [ 13.103503] msm_hsusb_host 12530000.usb: USB 2.0 started, EHCI 1.00
  299. [ 13.103642] usb usb2: runtime PM trying to activate child device usb2 but parent (12530000.usb) is not active
  300. [ 13.103997] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  301. [ 13.104004] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  302. [ 13.104010] usb usb2: Product: EHCI Host Controller
  303. [ 13.104016] usb usb2: Manufacturer: Linux 4.9.0-01579-g892f1cf ehci_hcd
  304. [ 13.104022] usb usb2: SerialNumber: 12530000.usb
  305. [ 13.104949] hub 2-0:1.0: USB hub found
  306. [ 13.105022] hub 2-0:1.0: 1 port detected
  307. [ 13.173618] msm_otg 12500000.phy: Avail curr from USB = 100
  308. [ 13.193569] usbserial: USB Serial support registered for generic
  309. [ 13.208661] mousedev: PS/2 mouse device common for all mice
  310. [ 13.212107] input: pmic8xxx_pwrkey as /devices/platform/soc/500000.qcom,ssbi/500000.qcom,ssbi:pmic@0/500000.qcom,ssbi:pmic@0:pwrkey@1c/inpu0
  311. [ 13.216268] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@11d: rtc core: registered pm8xxx_rtc as rtc0
  312. [ 13.226638] i2c /dev entries driver
  313. [ 13.241903] apq8064-pinctrl 800000.pinctrl: pin GPIO_16 already requested by 16540000.serial; cannot claim for 16580000.i2c
  314. [ 13.242030] apq8064-pinctrl 800000.pinctrl: pin-16 (16580000.i2c) status -22
  315. [ 13.252021] apq8064-pinctrl 800000.pinctrl: could not request pin 16 (GPIO_16) from group gpio16 on device 800000.pinctrl
  316. [ 13.259393] i2c_qup 16580000.i2c: Error applying setting, reverse things back
  317. [ 13.270162] i2c_qup: probe of 16580000.i2c failed with error -22
  318. [ 13.278455] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  319. [ 13.283750] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  320. [ 13.290664] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  321. [ 13.298027] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  322. [ 13.306220] pwrseq_simple pwrseq:sdcc4_pwrseq: GPIO lookup for consumer reset
  323. [ 13.312225] pwrseq_simple pwrseq:sdcc4_pwrseq: using device tree for GPIO lookup
  324. [ 13.319673] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/pwrseq/sdcc4_pwrseq[0]' - status (0)
  325. [ 13.327121] pwrseq_simple pwrseq:sdcc4_pwrseq: GPIO lookup for consumer reset
  326. [ 13.337234] pwrseq_simple pwrseq:sdcc4_pwrseq: using device tree for GPIO lookup
  327. [ 13.344558] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/pwrseq/sdcc4_pwrseq[1]' - status (0)
  328. [ 13.353170] mmci-pl18x 12400000.sdcc: GPIO lookup for consumer wp
  329. [ 13.362074] mmci-pl18x 12400000.sdcc: using device tree for GPIO lookup
  330. [ 13.368246] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/amba/sdcc@12400000[0]'
  331. [ 13.374684] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/amba/sdcc@12400000[0]'
  332. [ 13.384383] mmci-pl18x 12400000.sdcc: using lookup tables for GPIO lookup
  333. [ 13.394077] mmci-pl18x 12400000.sdcc: lookup for GPIO wp failed
  334. [ 13.401732] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 123,0 (pio)
  335. [ 13.406830] mmci-pl18x 12400000.sdcc: DMA channels RX dma0chan1, TX dma0chan2
  336. [ 13.417320] s4: voltage operation not allowed
  337. [ 13.422112] mmci-pl18x 12400000.sdcc: Voltage switch failed
  338. [ 13.454478] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
  339. [ 13.485353] mmci-pl18x 12180000.sdcc: GPIO lookup for consumer cd
  340. [ 13.485442] mmci-pl18x 12180000.sdcc: using device tree for GPIO lookup
  341. [ 13.490595] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/amba/sdcc@12180000[0]' - status (0)
  342. [ 13.498198] mmci-pl18x 12180000.sdcc: Got CD GPIO
  343. [ 13.509511] mmci-pl18x 12180000.sdcc: GPIO lookup for consumer wp
  344. [ 13.512161] mmci-pl18x 12180000.sdcc: using device tree for GPIO lookup
  345. [ 13.518328] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/amba/sdcc@12180000[0]'
  346. [ 13.524770] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/amba/sdcc@12180000[0]'
  347. [ 13.534493] mmci-pl18x 12180000.sdcc: using lookup tables for GPIO lookup
  348. [ 13.544114] mmci-pl18x 12180000.sdcc: lookup for GPIO wp failed
  349. [ 13.551623] mmci-pl18x 12180000.sdcc: mmc1: PL180 manf 51 rev0 at 0x12180000 irq 124,0 (pio)
  350. [ 13.556926] mmci-pl18x 12180000.sdcc: DMA channels RX dma1chan1, TX dma1chan2
  351. [ 13.626990] mmci-pl18x 121c0000.sdcc: GPIO lookup for consumer cd
  352. [ 13.627080] mmci-pl18x 121c0000.sdcc: using device tree for GPIO lookup
  353. [ 13.632124] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/soc/amba/sdcc@121c0000[0]'
  354. [ 13.638743] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/soc/amba/sdcc@121c0000[0]'
  355. [ 13.648450] mmci-pl18x 121c0000.sdcc: using lookup tables for GPIO lookup
  356. [ 13.658071] mmci-pl18x 121c0000.sdcc: lookup for GPIO cd failed
  357. [ 13.664851] mmci-pl18x 121c0000.sdcc: GPIO lookup for consumer wp
  358. [ 13.667575] usb 1-1: New USB device found, idVendor=0bda, idProduct=5401
  359. [ 13.667583] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  360. [ 13.667590] usb 1-1: Product: 4-Port USB 2.0 Hub
  361. [ 13.667596] usb 1-1: Manufacturer: Generic
  362. [ 13.671089] hub 1-1:1.0: USB hub found
  363. [ 13.673580] hub 1-1:1.0: 4 ports detected
  364. [ 13.702825] mmci-pl18x 121c0000.sdcc: using device tree for GPIO lookup
  365. [ 13.706978] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/amba/sdcc@121c0000[0]'
  366. [ 13.713378] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/amba/sdcc@121c0000[0]'
  367. [ 13.723144] mmci-pl18x 121c0000.sdcc: using lookup tables for GPIO lookup
  368. [ 13.732727] mmci-pl18x 121c0000.sdcc: lookup for GPIO wp failed
  369. [ 13.739645] mmci-pl18x 121c0000.sdcc: allocated mmc-pwrseq
  370. [ 13.745910] mmci-pl18x 121c0000.sdcc: mmc2: PL180 manf 51 rev0 at 0x121c0000 irq 125,0 (pio)
  371. [ 13.751002] mmci-pl18x 121c0000.sdcc: DMA channels RX dma2chan1, TX dma2chan2
  372. [ 13.759911] mmci-pl18x 121c0000.sdcc: Voltage switch failed
  373. [ 13.823775] sdhci: Secure Digital Host Controller Interface driver
  374. [ 13.823855] sdhci: Copyright(c) Pierre Ossman
  375. [ 13.828987] sdhci-pltfm: SDHCI platform and OF driver helper
  376. [ 13.834574] mmc0: new high speed MMC card at address 0001
  377. [ 13.840087] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
  378. [ 13.840483] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@1[0]' - status (0)
  379. [ 13.846668] ledtrig-cpu: registered to indicate activity on CPUs
  380. [ 13.847314] usbcore: registered new interface driver usbhid
  381. [ 13.847320] usbhid: USB HID core driver
  382. [ 13.848103] usbcore: registered new interface driver snd-usb-audio
  383. [ 13.850692] oprofile: using timer interrupt.
  384. [ 13.852596] NET: Registered protocol family 10
  385. [ 13.860621] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  386. [ 13.862195] NET: Registered protocol family 17
  387. [ 13.862371] Key type dns_resolver registered
  388. [ 13.862935] Registering SWP/SWPB emulation handler
  389. [ 13.906475] msm_iommu: device mapped at f0d80000, irq 130 with 2 ctx banks
  390. [ 13.907172] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 8.00 MiB
  391. [ 13.910195] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 8.00 MiB
  392. [ 13.912202] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB
  393. [ 13.919311] mmc2: queuing unknown CIS tuple 0x01 (3 bytes)
  394. [ 13.929619] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20
  395. [ 13.935325] mmc2: queuing unknown CIS tuple 0x1a (5 bytes)
  396. [ 13.938745] mmc2: queuing unknown CIS tuple 0x1b (8 bytes)
  397. [ 13.939436] mmc2: queuing unknown CIS tuple 0x14 (0 bytes)
  398. [ 13.940481] random: fast init done
  399. [ 13.944203] mmc2: queuing unknown CIS tuple 0x80 (1 bytes)
  400. [ 13.944383] mmc2: queuing unknown CIS tuple 0x81 (1 bytes)
  401. [ 13.944571] mmc2: queuing unknown CIS tuple 0x82 (1 bytes)
  402. [ 13.944715] mmc2: new high speed SDIO card at address 0001
  403. [ 13.984715] msm_iommu: device mapped at f0f00000, irq 132 with 2 ctx banks
  404. [ 13.991081] msm_iommu: device mapped at f1080000, irq 134 with 3 ctx banks
  405. [ 13.997410] msm_iommu: device mapped at f1200000, irq 136 with 3 ctx banks
  406. [ 14.111260] [drm:msm_mdss_init]
  407. [ 14.111509] [drm:dsi_bind]
  408. [ 14.113704] [drm:dsi_bind] dsi probed=ee073310
  409. [ 14.116479] 4700000.mdss_dsi supply gdsc not found, using dummy regulator
  410. [ 14.120876] [drm:msm_dsi_host_init] dsi_get_config: Version 2:0
  411. [ 14.120876]
  412. [ 14.129624] [drm:msm_dsi_host_init] Dsi Host 0 initialized
  413. [ 14.136195] panel-truly-otm8018b 4700000.mdss_dsi.0: GPIO lookup for consumer reset
  414. [ 14.140282] panel-truly-otm8018b 4700000.mdss_dsi.0: using device tree for GPIO lookup
  415. [ 14.147989] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/mdss_dsi@4700000/panel@0[0]' - status (0)
  416. [ 14.155965] panel-truly-otm8018b 4700000.mdss_dsi.0: GPIO lookup for consumer bklt-pwm
  417. [ 14.166969] panel-truly-otm8018b 4700000.mdss_dsi.0: using device tree for GPIO lookup
  418. [ 14.174948] of_get_named_gpiod_flags: parsed 'bklt-pwm-gpios' property of node '/soc/mdss_dsi@4700000/panel@0[0]' - status (0)
  419. [ 14.182780] panel-truly-otm8018b 4700000.mdss_dsi.0: GPIO lookup for consumer disp-enable
  420. [ 14.194198] panel-truly-otm8018b 4700000.mdss_dsi.0: using device tree for GPIO lookup
  421. [ 14.202347] of_get_named_gpiod_flags: can't parse 'disp-enable-gpios' property of node '/soc/mdss_dsi@4700000/panel@0[0]'
  422. [ 14.210281] of_get_named_gpiod_flags: can't parse 'disp-enable-gpio' property of node '/soc/mdss_dsi@4700000/panel@0[0]'
  423. [ 14.221293] panel-truly-otm8018b 4700000.mdss_dsi.0: using lookup tables for GPIO lookup
  424. [ 14.232219] panel-truly-otm8018b 4700000.mdss_dsi.0: lookup for GPIO disp-enable failed
  425. [ 14.240293] panel-truly-otm8018b 4700000.mdss_dsi.0: GPIO lookup for consumer disp-te
  426. [ 14.248023] panel-truly-otm8018b 4700000.mdss_dsi.0: using device tree for GPIO lookup
  427. [ 14.255994] of_get_named_gpiod_flags: can't parse 'disp-te-gpios' property of node '/soc/mdss_dsi@4700000/panel@0[0]'
  428. [ 14.263836] of_get_named_gpiod_flags: can't parse 'disp-te-gpio' property of node '/soc/mdss_dsi@4700000/panel@0[0]'
  429. [ 14.274513] panel-truly-otm8018b 4700000.mdss_dsi.0: using lookup tables for GPIO lookup
  430. [ 14.285072] panel-truly-otm8018b 4700000.mdss_dsi.0: lookup for GPIO disp-te failed
  431. [ 14.293065] [drm:dsi_host_attach] id=0
  432. [ 14.300544] msm 5100000.mdp: bound 4700000.mdss_dsi (ops dsi_ops)
  433. [ 14.304338] [drm:dsi_bind]
  434. [ 14.310389] [drm:dsi_bind] dsi probed=ee073490
  435. [ 14.313242] 5800000.mdss_dsi supply gdsc not found, using dummy regulator
  436. [ 14.317826] [drm:msm_dsi_host_init] dsi_get_config: Version 2:0
  437. [ 14.317826]
  438. [ 14.326448] [drm:msm_dsi_host_init] Dsi Host 1 initialized
  439. [ 14.332923] panel-truly-otm8018b 5800000.mdss_dsi.0: GPIO lookup for consumer reset
  440. [ 14.337268] panel-truly-otm8018b 5800000.mdss_dsi.0: using device tree for GPIO lookup
  441. [ 14.344845] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/mdss_dsi@5800000/panel@0[0]' - status (0)
  442. [ 14.352729] panel-truly-otm8018b 5800000.mdss_dsi.0: GPIO lookup for consumer bklt-pwm
  443. [ 14.363817] panel-truly-otm8018b 5800000.mdss_dsi.0: using device tree for GPIO lookup
  444. [ 14.371729] of_get_named_gpiod_flags: parsed 'bklt-pwm-gpios' property of node '/soc/mdss_dsi@5800000/panel@0[0]' - status (0)
  445. [ 14.379756] panel-truly-otm8018b 5800000.mdss_dsi.0: GPIO lookup for consumer disp-enable
  446. [ 14.391067] panel-truly-otm8018b 5800000.mdss_dsi.0: using device tree for GPIO lookup
  447. [ 14.399334] of_get_named_gpiod_flags: can't parse 'disp-enable-gpios' property of node '/soc/mdss_dsi@5800000/panel@0[0]'
  448. [ 14.407141] of_get_named_gpiod_flags: can't parse 'disp-enable-gpio' property of node '/soc/mdss_dsi@5800000/panel@0[0]'
  449. [ 14.418153] panel-truly-otm8018b 5800000.mdss_dsi.0: using lookup tables for GPIO lookup
  450. [ 14.429079] panel-truly-otm8018b 5800000.mdss_dsi.0: lookup for GPIO disp-enable failed
  451. [ 14.437168] panel-truly-otm8018b 5800000.mdss_dsi.0: GPIO lookup for consumer disp-te
  452. [ 14.444884] panel-truly-otm8018b 5800000.mdss_dsi.0: using device tree for GPIO lookup
  453. [ 14.452780] of_get_named_gpiod_flags: can't parse 'disp-te-gpios' property of node '/soc/mdss_dsi@5800000/panel@0[0]'
  454. [ 14.460697] of_get_named_gpiod_flags: can't parse 'disp-te-gpio' property of node '/soc/mdss_dsi@5800000/panel@0[0]'
  455. [ 14.471373] panel-truly-otm8018b 5800000.mdss_dsi.0: using lookup tables for GPIO lookup
  456. [ 14.481963] panel-truly-otm8018b 5800000.mdss_dsi.0: lookup for GPIO disp-te failed
  457. [ 14.490030] [drm:dsi_host_attach] id=1
  458. [ 14.497442] msm 5100000.mdp: bound 5800000.mdss_dsi (ops dsi_ops)
  459. [ 14.501142] msm 5100000.mdp: bound 4300000.adreno-3xx (ops a3xx_ops)
  460. [ 14.507621] msm 5100000.mdp: dummy supplies not allowed
  461. [ 14.514384] [drm:mdp4_enable]
  462. [ 14.518675] [drm:mdp4_disable]
  463. [ 14.540071] [drm:mdp4_enable]
  464. [ 14.540254] [drm:mdp4_disable]
  465. [ 14.542100] [drm:mdp4_hw_init] found MDP4 version v4.4
  466. [ 14.545235] [drm:mdp4_hw_init] fetch config: dmap=47, vg=47
  467. [ 14.550332] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  468. [ 14.555865] [drm] No driver support for vblank timestamp query.
  469. [ 14.562405] [drm:drm_irq_install] irq=140
  470. [ 14.568390] [drm:mdp4_enable]
  471. [ 14.572548] [drm:mdp4_disable]
  472. [ 14.575647] [drm:drm_minor_register]
  473. [ 14.581204] [drm:drm_minor_register] new minor registered 64
  474. [ 14.582265] [drm:drm_minor_register]
  475. [ 14.590710] [drm:drm_minor_register] new minor registered 128
  476. [ 14.591554] [drm:drm_minor_register]
  477. [ 14.598913] [drm:drm_minor_register] new minor registered 0
  478. [ 14.601200] [drm:drm_sysfs_connector_add] adding "DSI-1" to sysfs
  479. [ 14.606424] [drm:drm_sysfs_hotplug_event] generating hotplug event
  480. [ 14.612902] [drm:drm_sysfs_connector_add] adding "DSI-2" to sysfs
  481. [ 14.618748] [drm:drm_sysfs_hotplug_event] generating hotplug event
  482. [ 14.625023] [drm:drm_mode_object_reference] OBJ ID: 30 (1)
  483. [ 14.630877] [drm:drm_mode_object_reference] OBJ ID: 32 (1)
  484. [ 14.636450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:30:DSI-1]
  485. [ 14.641839] [drm:dsi_mgr_connector_detect] id=0
  486. [ 14.649113] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:30:DSI-1] status updated from unknown to connected
  487. [ 14.653612] [drm:dsi_mgr_connector_mode_valid]
  488. [ 14.664311] [drm:dsi_mgr_connector_mode_valid] requested=30857000, actual=30857000
  489. [ 14.668749] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:30:DSI-1] probed modes :
  490. [ 14.676501] [drm:drm_mode_debug_printmodeline] Modeline 33:"480x864" 60 30857 480 526 530 574 864 879 880 896 0x0 0x0
  491. [ 14.685087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:DSI-2]
  492. [ 14.695678] [drm:dsi_mgr_connector_detect] id=1
  493. [ 14.702663] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:DSI-2] status updated from unknown to connected
  494. [ 14.707225] [drm:dsi_mgr_connector_mode_valid]
  495. [ 14.717958] [drm:dsi_mgr_connector_mode_valid] requested=30857000, actual=30857000
  496. [ 14.722393] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:DSI-2] probed modes :
  497. [ 14.730145] [drm:drm_mode_debug_printmodeline] Modeline 34:"480x864" 60 30857 480 526 530 574 864 879 880 896 0x0 0x0
  498. [ 14.738742] [drm:drm_setup_crtcs]
  499. [ 14.749302] [drm:drm_setup_crtcs] connector 30 enabled? yes
  500. [ 14.752493] [drm:drm_setup_crtcs] connector 32 enabled? yes
  501. [ 14.758073] [drm:drm_setup_crtcs] looking for cmdline mode on connector 30
  502. [ 14.763611] [drm:drm_setup_crtcs] looking for preferred mode on connector 30 0
  503. [ 14.770480] [drm:drm_setup_crtcs] found mode 480x864
  504. [ 14.777769] [drm:drm_setup_crtcs] looking for cmdline mode on connector 32
  505. [ 14.782794] [drm:drm_setup_crtcs] looking for preferred mode on connector 32 0
  506. [ 14.789576] [drm:drm_setup_crtcs] found mode 480x864
  507. [ 14.796781] [drm:drm_setup_crtcs] picking CRTCs for 2048x2048 config
  508. [ 14.801805] [drm:dsi_mgr_connector_best_encoder]
  509. [ 14.808226] [drm:dsi_mgr_connector_best_encoder]
  510. [ 14.812742] [drm:drm_setup_crtcs] desired mode 480x864 set on crtc 26 (0,0)
  511. [ 14.817530] [drm:drm_mode_object_reference] OBJ ID: 32 (2)
  512. [ 14.824313] [drm:msm_fbdev_create] create fbdev: 480x864@32 (480x864)
  513. [ 14.829752] [drm:msm_fbdev_create] allocating 1658880 bytes for fb 0
  514. [ 14.836402] [drm:msm_framebuffer_init] create framebuffer: dev=ede64c00, mode_cmd=edc01cb0 (480x864@XR24)
  515. [ 14.842724] [drm:msm_framebuffer_init] create: FB ID: 36 (ee069840)
  516. [ 14.867970] [drm:msm_fbdev_create] fbi=ede67800, dev=ede64c00
  517. [ 14.868142] [drm:msm_fbdev_create] par=ee0696c0, 480x864
  518. [ 14.872755] [drm:msm_fbdev_create] allocated 480x864 fb
  519. [ 14.880509] [drm:drm_mode_object_reference] OBJ ID: 36 (1)
  520. [ 14.880537] [drm:drm_mode_object_reference] OBJ ID: 32 (3)
  521. [ 14.880553] [drm:drm_mode_object_reference] OBJ ID: 32 (4)
  522. [ 14.880590] [drm:mdp4_crtc_atomic_check] DMA_P:0: check
  523. [ 14.880605] [drm:mdp4_crtc_atomic_check] DMA_E:1: check
  524. [ 14.880631] [drm:dsi_mgr_connector_best_encoder]
  525. [ 14.880651] [drm:dsi_mgr_connector_best_encoder]
  526. [ 14.880684] [drm:mdp4_plane_prepare_fb] RGB1: prepare: FB[36]
  527. [ 14.880706] [drm:msm_framebuffer_prepare] FB[36]: iova[0]: 00005000 (0)
  528. [ 14.880736] [drm:msm_atomic_commit] start: 00000003
  529. [ 14.880758] [drm:mdp4_enable]
  530. [ 14.880899] [drm:msm_enable_vblank] dev=ede64c00, crtc=0
  531. [ 14.880940] [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
  532. [ 14.880971] [drm:msm_enable_vblank] dev=ede64c00, crtc=1
  533. [ 14.880991] [drm:drm_vblank_enable] enabling vblank on crtc 1, ret: 0
  534. [ 14.881024] [drm:drm_calc_timestamping_constants] crtc 26: hwmode: htotal 574, vtotal 896, vdisplay 864
  535. [ 14.881043] [drm:drm_calc_timestamping_constants] crtc 26: clock 30857 kHz framedur 16667336 linedur 18601
  536. [ 14.881073] [drm:mdp4_crtc_mode_set_nofb] DMA_P:0: set mode: 0:"480x864" 60 30857 480 526 530 574 864 879 880 896 0x0 0x0
  537. [ 14.881109] [drm:mdp4_dsi_encoder_mode_set] set mode: 0:"480x864" 60 30857 480 526 530 574 864 879 880 896 0x0 0x0
  538. [ 14.881145] [drm:dsi_mgr_bridge_mode_set] set mode: 0:"480x864" 60 30857 480 526 530 574 864 879 880 896 0x0 0x0
  539. [ 14.881174] [drm:drm_atomic_helper_commit_planes] DMA_P:0: begin
  540. [ 14.881189] [drm:drm_atomic_helper_commit_planes] DMA_E:1: begin
  541. [ 14.881216] [drm:mdp4_plane_atomic_update] RGB1: FB[36] 0,0,480,864 -> CRTC[26] 0,0,480,864
  542. [ 14.881242] [drm:mdp4_crtc_atomic_flush] DMA_P:0: event: (null)
  543. [ 14.881282] [drm:crtc_flush] DMA_P:0: flush=00000011
  544. [ 14.881305] [drm:mdp4_crtc_atomic_flush] DMA_E:1: event: (null)
  545. [ 14.881337] [drm:crtc_flush] DMA_E:1: flush=00000002
  546. [ 14.881357] [drm:mdp4_crtc_enable] DMA_P:0
  547. [ 14.881369] [drm:mdp4_enable]
  548. [ 14.881399] [drm:crtc_flush] DMA_P:0: flush=00000011
  549. [ 14.881421] [drm:dsi_mgr_bridge_pre_enable] id=1
  550. [ 14.881449] [drm:msm_dsi_host_power_on] pclk=30857000, bclk=46285500
  551. [ 14.881472] [drm:msm_dsi_host_power_on] esc=15428500, src=92571000
  552. [ 14.881488] [drm:msm_dsi_host_power_on]
  553. [ 14.884162] [drm:mdp4_enable]
  554. [ 14.884180] [drm:mdp4_disable]
  555. [ 14.884195] [drm:mdp4_enable]
  556. [ 14.884208] [drm:mdp4_disable]
  557. [ 14.887415] [drm:dsi_bus_clk_enable] id=1
  558. [ 14.887463] [drm:msm_dsi_host_power_on]
  559. [ 14.888588] [drm:msm_dsi_phy_enable]
  560. [ 14.888971] [drm:dsi_28nm_phy_enable]
  561. [ 14.889006] [drm:msm_dsi_dphy_timing_calc] PHY timings: 25, 4, 114, 24, 16, 58, 62, 18, 26, 22
  562. [ 14.896465] [drm:dsi_bus_clk_disable]
  563. [ 14.896518] [drm:dsi_bus_clk_enable] id=1
  564. [ 14.896571] [drm:dsi_clk_ctrl] Set clk rates: pclk=30857, byteclk=46285500, esc_clk=15428500, dsi_src_clk=92571000
  565. [ 14.896642] [drm:dsi_pll_28nm_clk_set_rate] rate=740568000, parent's=27000000
  566. [ 14.896661] [drm:dsi_pll_28nm_clk_recalc_rate] returning vco rate = 0
  567. [ 14.896840] [drm:dsi_pll_28nm_enable_seq] id=2
  568. [ 14.997969] [drm:pll_28nm_poll_for_ready] DSI PLL is *not* locked
  569. [ 14.997987] msm_dsi_phy 5800200.dsi-phy: DSI PLL lock failed
  570. [ 14.998013] [drm:msm_dsi_pll_helper_clk_prepare] DSI PLL unlocked after sequence #1
  571. [ 14.998031] [drm:msm_dsi_pll_helper_clk_prepare] *ERROR* DSI PLL failed to lock
  572. [ 14.998042] dsi_link_clk_enable_v2: Failed to enable dsi byte clk
  573. [ 14.998050] dsi_clk_ctrl: Can not enable link clk, -22
  574. [ 14.998066] [drm:dsi_bus_clk_disable]
  575. [ 14.998102] msm_dsi_host_power_on: failed to enable clocks. ret=-22
  576. [ 14.998119] [drm:dsi_host_regulator_disable]
  577. [ 15.000777] dsi_mgr_bridge_pre_enable: power on host 1 failed, -22
  578. [ 15.000788] mdp4_dsi_encoder_enable: dsi_id : 1
  579. [ 15.000827] [drm:mdp4_crtc_set_intf] DMA_P:0: intf_sel=00000049
  580. [ 15.000853] [drm:drm_bridge_enable]
  581. [ 15.054733] msm 5100000.mdp: vblank time out, crtc=0
  582. [ 15.054766] [drm:mdp4_disable]
  583. [ 15.054801] [drm:drm_mode_object_unreference] OBJ ID: 32 (5)
  584. [ 15.054845] [drm:complete_commit] end: 00000003
  585. [ 15.054866] [drm:drm_mode_object_reference] OBJ ID: 36 (2)
  586. [ 15.054982] [drm:drm_mode_object_reference] OBJ ID: 37 (1)
  587. [ 15.055002] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  588. [ 15.055020] [drm:drm_mode_object_unreference] OBJ ID: 37 (2)
  589. [ 15.055051] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  590. [ 15.055067] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  591. [ 15.055090] [drm:drm_mode_object_reference] OBJ ID: 32 (4)
  592. [ 15.055106] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  593. [ 15.055122] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  594. [ 15.055138] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  595. [ 15.055170] [drm:mdp4_crtc_atomic_check] DMA_P:0: check
  596. [ 15.055185] [drm:mdp4_crtc_atomic_check] DMA_E:1: check
  597. [ 15.055209] [drm:dsi_mgr_connector_best_encoder]
  598. [ 15.055227] [drm:dsi_mgr_connector_best_encoder]
  599. [ 15.055257] [drm:msm_atomic_commit] start: 00000003
  600. [ 15.055276] [drm:mdp4_enable]
  601. [ 15.055320] [drm:drm_calc_timestamping_constants] crtc 26: hwmode: htotal 574, vtotal 896, vdisplay 864
  602. [ 15.055339] [drm:drm_calc_timestamping_constants] crtc 26: clock 30857 kHz framedur 16667336 linedur 18601
  603. [ 15.055360] [drm:drm_atomic_helper_commit_planes] DMA_P:0: begin
  604. [ 15.055375] [drm:drm_atomic_helper_commit_planes] DMA_E:1: begin
  605. [ 15.055400] [drm:mdp4_plane_atomic_update] RGB1: FB[36] 0,0,480,864 -> CRTC[26] 0,0,480,864
  606. [ 15.055426] [drm:mdp4_crtc_atomic_flush] DMA_P:0: event: (null)
  607. [ 15.055461] [drm:crtc_flush] DMA_P:0: flush=00000011
  608. [ 15.055479] [drm:mdp4_crtc_atomic_flush] DMA_E:1: event: (null)
  609. [ 15.055511] [drm:crtc_flush] DMA_E:1: flush=00000002
  610. [ 15.114697] msm 5100000.mdp: vblank time out, crtc=0
  611. [ 15.114729] [drm:mdp4_disable]
  612. [ 15.114761] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  613. [ 15.114780] [drm:drm_mode_object_unreference] OBJ ID: 32 (5)
  614. [ 15.114796] [drm:drm_mode_object_unreference] OBJ ID: 37 (1)
  615. [ 15.114822] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  616. [ 15.114852] [drm:complete_commit] end: 00000003
  617. [ 15.114871] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  618. [ 15.114887] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  619. [ 15.127723] Console: switching to colour frame buffer device 60x54
  620. [ 15.127778] [drm:drm_mode_object_reference] OBJ ID: 39 (1)
  621. [ 15.127799] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  622. [ 15.127817] [drm:drm_mode_object_unreference] OBJ ID: 39 (2)
  623. [ 15.127844] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  624. [ 15.127859] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  625. [ 15.127882] [drm:drm_mode_object_reference] OBJ ID: 32 (4)
  626. [ 15.127898] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  627. [ 15.127914] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  628. [ 15.127930] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  629. [ 15.127966] [drm:mdp4_crtc_atomic_check] DMA_P:0: check
  630. [ 15.127981] [drm:mdp4_crtc_atomic_check] DMA_E:1: check
  631. [ 15.128005] [drm:dsi_mgr_connector_best_encoder]
  632. [ 15.128022] [drm:dsi_mgr_connector_best_encoder]
  633. [ 15.128053] [drm:msm_atomic_commit] start: 00000003
  634. [ 15.128071] [drm:mdp4_enable]
  635. [ 15.128114] [drm:drm_calc_timestamping_constants] crtc 26: hwmode: htotal 574, vtotal 896, vdisplay 864
  636. [ 15.128134] [drm:drm_calc_timestamping_constants] crtc 26: clock 30857 kHz framedur 16667336 linedur 18601
  637. [ 15.128155] [drm:drm_atomic_helper_commit_planes] DMA_P:0: begin
  638. [ 15.128170] [drm:drm_atomic_helper_commit_planes] DMA_E:1: begin
  639. [ 15.128196] [drm:mdp4_plane_atomic_update] RGB1: FB[36] 0,0,480,864 -> CRTC[26] 0,0,480,864
  640. [ 15.128220] [drm:mdp4_crtc_atomic_flush] DMA_P:0: event: (null)
  641. [ 15.128254] [drm:crtc_flush] DMA_P:0: flush=00000011
  642. [ 15.128273] [drm:mdp4_crtc_atomic_flush] DMA_E:1: event: (null)
  643. [ 15.128304] [drm:crtc_flush] DMA_E:1: flush=00000002
  644. [ 15.184733] msm 5100000.mdp: vblank time out, crtc=0
  645. [ 15.184763] [drm:mdp4_disable]
  646. [ 15.184796] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  647. [ 15.184814] [drm:drm_mode_object_unreference] OBJ ID: 32 (5)
  648. [ 15.184830] [drm:drm_mode_object_unreference] OBJ ID: 39 (1)
  649. [ 15.184855] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  650. [ 15.184884] [drm:complete_commit] end: 00000003
  651. [ 15.184903] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  652. [ 15.184918] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  653. [ 17.248119] msm 5100000.mdp: fb0: msm frame buffer device
  654. [ 17.296789] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@11d: setting system clock to 1970-01-01 04:09:19 UTC (14959)
  655. [ 17.318696] [drm:drm_sysfs_hotplug_event] generating hotplug event
  656. [ 17.318767] [drm:drm_fb_helper_hotplug_event]
  657. [ 17.318788] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:30:DSI-1]
  658. [ 17.318811] [drm:dsi_mgr_connector_detect] id=0
  659. [ 17.318851] [drm:dsi_mgr_connector_mode_valid]
  660. [ 17.318873] [drm:dsi_mgr_connector_mode_valid] requested=30857000, actual=30857000
  661. [ 17.318894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:30:DSI-1] probed modes :
  662. [ 17.318931] [drm:drm_mode_debug_printmodeline] Modeline 33:"480x864" 60 30857 480 526 530 574 864 879 880 896 0x0 0x0
  663. [ 17.318948] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:DSI-2]
  664. [ 17.318967] [drm:dsi_mgr_connector_detect] id=1
  665. [ 17.319000] [drm:dsi_mgr_connector_mode_valid]
  666. [ 17.319019] [drm:dsi_mgr_connector_mode_valid] requested=30857000, actual=30857000
  667. [ 17.319038] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:DSI-2] probed modes :
  668. [ 17.319069] [drm:drm_mode_debug_printmodeline] Modeline 34:"480x864" 60 30857 480 526 530 574 864 879 880 896 0x0 0x0
  669. [ 17.319098] [drm:drm_setup_crtcs]
  670. [ 17.319121] [drm:drm_setup_crtcs] connector 30 enabled? yes
  671. [ 17.319139] [drm:drm_setup_crtcs] connector 32 enabled? yes
  672. [ 17.319159] [drm:drm_setup_crtcs] looking for cmdline mode on connector 30
  673. [ 17.319177] [drm:drm_setup_crtcs] looking for preferred mode on connector 30 0
  674. [ 17.319194] [drm:drm_setup_crtcs] found mode 480x864
  675. [ 17.319211] [drm:drm_setup_crtcs] looking for cmdline mode on connector 32
  676. [ 17.319228] [drm:drm_setup_crtcs] looking for preferred mode on connector 32 0
  677. [ 17.319245] [drm:drm_setup_crtcs] found mode 480x864
  678. [ 17.319263] [drm:drm_setup_crtcs] picking CRTCs for 2048x2048 config
  679. [ 17.319285] [drm:dsi_mgr_connector_best_encoder]
  680. [ 17.319305] [drm:dsi_mgr_connector_best_encoder]
  681. [ 17.319323] [drm:drm_mode_object_unreference] OBJ ID: 32 (4)
  682. [ 17.319348] [drm:drm_setup_crtcs] desired mode 480x864 set on crtc 26 (0,0)
  683. [ 17.319369] [drm:drm_mode_object_reference] OBJ ID: 32 (3)
  684. [ 17.319415] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  685. [ 17.319436] [drm:drm_mode_object_reference] OBJ ID: 37 (1)
  686. [ 17.319456] [drm:drm_mode_object_unreference] OBJ ID: 37 (2)
  687. [ 17.319495] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  688. [ 17.319512] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  689. [ 17.319536] [drm:drm_mode_object_reference] OBJ ID: 32 (4)
  690. [ 17.319551] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  691. [ 17.319567] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  692. [ 17.319583] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  693. [ 17.319613] [drm:mdp4_crtc_atomic_check] DMA_P:0: check
  694. [ 17.319627] [drm:mdp4_crtc_atomic_check] DMA_E:1: check
  695. [ 17.319649] [drm:dsi_mgr_connector_best_encoder]
  696. [ 17.319666] [drm:dsi_mgr_connector_best_encoder]
  697. [ 17.319697] [drm:msm_atomic_commit] start: 00000003
  698. [ 17.319717] [drm:mdp4_enable]
  699. [ 17.319759] [drm:drm_calc_timestamping_constants] crtc 26: hwmode: htotal 574, vtotal 896, vdisplay 864
  700. [ 17.319778] [drm:drm_calc_timestamping_constants] crtc 26: clock 30857 kHz framedur 16667336 linedur 18601
  701. [ 17.319797] [drm:drm_atomic_helper_commit_planes] DMA_P:0: begin
  702. [ 17.319812] [drm:drm_atomic_helper_commit_planes] DMA_E:1: begin
  703. [ 17.319842] [drm:mdp4_plane_atomic_update] RGB1: FB[36] 0,0,480,864 -> CRTC[26] 0,0,480,864
  704. [ 17.319870] [drm:mdp4_crtc_atomic_flush] DMA_P:0: event: (null)
  705. [ 17.319903] [drm:crtc_flush] DMA_P:0: flush=00000011
  706. [ 17.319922] [drm:mdp4_crtc_atomic_flush] DMA_E:1: event: (null)
  707. [ 17.319953] [drm:crtc_flush] DMA_E:1: flush=00000002
  708. [ 17.374087] msm 5100000.mdp: vblank time out, crtc=0
  709. [ 17.374117] [drm:mdp4_disable]
  710. [ 17.374147] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  711. [ 17.374164] [drm:drm_mode_object_unreference] OBJ ID: 32 (5)
  712. [ 17.374179] [drm:drm_mode_object_unreference] OBJ ID: 37 (1)
  713. [ 17.374209] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  714. [ 17.374237] [drm:complete_commit] end: 00000003
  715. [ 17.374256] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  716. [ 17.374271] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  717. [ 18.418877] Speed bin: 1
  718. [ 18.429607] PVS bin: 2
  719. [ 18.452349] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
  720. [ 18.473577] cpu cpu1: opp_list_debug_create_link: Failed to create link
  721. [ 18.494745] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
  722. [ 18.515877] cpu cpu2: opp_list_debug_create_link: Failed to create link
  723. [ 18.537003] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
  724. [ 18.558176] cpu cpu3: opp_list_debug_create_link: Failed to create link
  725. [ 18.579349] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
  726. [ 18.602767] ALSA device list:
  727. [ 18.613286] No soundcards found.
  728. [ 18.627390] Freeing unused kernel memory: 1024K (c0f00000 - c1000000)
  729. Loading, please wait...
  730. starting version 219
  731. could not open moddep file '/lib/modules/4.9.0-01579-g892f1cf/modules.dep.bin'
  732. could not open moddep file '/lib/modules/4.9.0-01579-g892f1cf/modules.dep.bin'
  733. Begin: Loading essential drivers ... done.
  734. Begin: Running /scripts/init-premount ... done.
  735. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  736. Begin: Running /scripts/local-premount ... done.
  737. [ 19.460750] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null)
  738. Begin: Running /scripts/local-bottom ... done.
  739. done.
  740. Begin: Running /scripts/init-bottom ... done.
  741. [ 19.809903] systemd[1]: Failed to insert module 'kdbus': Function not implemented
  742.  
  743. Welcome to Debian GNU/Linux 8 (jessie)!
  744.  
  745. [ OK ] Listening on udev Kernel Socket.
  746. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  747. [ OK ] Created slice User and Session Slice.
  748. [ OK ] Listening on udev Control Socket.
  749. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  750. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  751. [ OK ] Reached target Remote File Systems (Pre).
  752. [ OK ] Listening on Journal Socket.
  753. [ OK ] Listening on Journal Socket (/dev/log).
  754. [ OK ] Listening on Syslog Socket.
  755. [ OK ] Reached target Swap.
  756. [ OK ] Reached target Remote File Systems.
  757. [ OK ] Created slice System Slice.
  758. Starting Load Kernel Modules...
  759. Starting LSB: Prepare console...
  760. Mounting POSIX Message Queue File System...
  761. [ OK ] Created slice system-getty.slice.
  762. [ OK ] Reached target Slices.
  763. Starting Journal Service...
  764. Starting Create Static Device Nodes in /dev...
  765. Starting Nameserver information manager...
  766. Mounting Debug File System...
  767. [ OK ] Created slice system-serial\x2dgetty.slice.
  768. [ OK ] Reached target Encrypted Volumes.
  769. [ OK ] Started Load Kernel Modules.
  770. Mounting FUSE Control File System...
  771. Starting Apply Kernel Variables...
  772. [ OK ] Mounted Debug File System.
  773. [ OK ] Mounted POSIX Message Queue File System.
  774. [ OK ] Mounted FUSE Control File System.
  775. [ OK ] Started Create Static Device Nodes in /dev.
  776. [ OK ] Started Apply Kernel Variables.
  777. [ OK ] Started Nameserver information manager.
  778. Starting udev Kernel Device Manager...
  779. [ OK ] Started LSB: Prepare console.
  780. Starting LSB: Set console font and keymap...
  781. [ OK ] Started udev Kernel Device Manager.
  782. Starting LSB: Set preliminary keymap...
  783. [ OK ] Started Journal Service.
  784. [ 22.403520] [drm:vblank_disable_fn] disabling vblank on crtc 1
  785. [ 22.425592] [drm:msm_disable_vblank] dev=ede64c00, crtc=1
  786. [ 22.436857] [drm:vblank_disable_fn] disabling vblank on crtc 0
  787. [ 22.438771] [drm:mdp4_enable]
  788. [ 22.438805] [drm:mdp4_disable]
  789. [ 22.480218] [drm:msm_disable_vblank] dev=ede64c00, crtc=0
  790. [ 22.491985] [drm:mdp4_enable]
  791. [ 22.503349] [drm:mdp4_disable]
  792. [ OK ] Started LSB: Set preliminary keymap.
  793. Starting Remount Root and Kernel File Systems...
  794. [ OK ] Started Remount Root and Kernel File Systems.
  795. Starting Flush Journal to Persistent Storage...
  796. Starting Load/Save Random Seed...
  797. Starting udev Coldplug all Devices...
  798. [ OK ] Reached target Local File Systems (Pre).
  799. [ OK ] Started Load/Save Random Seed.
  800. [ 24.014211] systemd-journald[210]: Received request to flush runtime journal from PID 1
  801. [ OK ] Started Flush Journal to Persistent Storage.
  802. [ OK ] Started udev Coldplug all Devices.
  803. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  804. [ OK ] Found device /dev/ttyMSM0.
  805. [ OK ] Found device /dev/disk/by-label/qcom-firmware.
  806. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  807. [ 25.923185] [drm:drm_mode_object_reference] OBJ ID: 39 (1)
  808. [ 25.923208] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  809. [ 25.923226] [drm:drm_mode_object_unreference] OBJ ID: 39 (2)
  810. [ 25.923252] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  811. [ 25.923265] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  812. [ 25.923288] [drm:drm_mode_object_reference] OBJ ID: 32 (4)
  813. [ 25.923301] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  814. [ 25.923317] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  815. [ 25.923332] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  816. [ 25.923366] [drm:mdp4_crtc_atomic_check] DMA_P:0: check
  817. [ 25.923380] [drm:mdp4_crtc_atomic_check] DMA_E:1: check
  818. [ 25.923406] [drm:dsi_mgr_connector_best_encoder]
  819. [ 25.923423] [drm:dsi_mgr_connector_best_encoder]
  820. [ 25.923559] [drm:msm_atomic_commit] start: 00000003
  821. [ 25.923579] [drm:mdp4_enable]
  822. [ 25.923613] [drm:msm_enable_vblank] dev=ede64c00, crtc=0
  823. [ 25.923649] [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
  824. [ 25.923676] [drm:msm_enable_vblank] dev=ede64c00, crtc=1
  825. [ 25.923697] [drm:drm_vblank_enable] enabling vblank on crtc 1, ret: 0
  826. [ 25.923725] [drm:drm_calc_timestamping_constants] crtc 26: hwmode: htotal 574, vtotal 896, vdisplay 864
  827. [ 25.923746] [drm:drm_calc_timestamping_constants] crtc 26: clock 30857 kHz framedur 16667336 linedur 18601
  828. [ 25.923767] [drm:drm_atomic_helper_commit_planes] DMA_P:0: begin
  829. [ 25.923781] [drm:drm_atomic_helper_commit_planes] DMA_E:1: begin
  830. [ 25.923805] [drm:mdp4_plane_atomic_update] RGB1: FB[36] 0,0,480,864 -> CRTC[26] 0,0,480,864
  831. [ 25.923955] [drm:mdp4_crtc_atomic_flush] DMA_P:0: event: (null)
  832. [ 25.923991] [drm:crtc_flush] DMA_P:0: flush=00000011
  833. [ 25.924008] [drm:mdp4_crtc_atomic_flush] DMA_E:1: event: (null)
  834. [ 25.924037] [drm:crtc_flush] DMA_E:1: flush=00000002
  835. [ 25.924810] [drm:mdp4_enable]
  836. [ 25.924838] [drm:mdp4_disable]
  837. [ 25.924862] [drm:mdp4_enable]
  838. [ 25.924882] [drm:mdp4_disable]
  839. [ 25.967960] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)
  840. [ 25.984701] msm 5100000.mdp: vblank time out, crtc=0
  841. [ 25.984740] [drm:mdp4_disable]
  842. [ 25.984775] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  843. [ 25.984795] [drm:drm_mode_object_unreference] OBJ ID: 32 (5)
  844. [ 25.984811] [drm:drm_mode_object_unreference] OBJ ID: 39 (1)
  845. [ 25.984837] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  846. [ 25.984868] [drm:complete_commit] end: 00000003
  847. [ 25.984886] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  848. [ 25.984900] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  849. Mounting /lib/firmware...
  850. [ OK ] Mounted /lib/firmware.
  851. [ OK ] Reached target Local File Systems.
  852. Starting LSB: Raise network interfaces....
  853. Starting Create Volatile Files and Directories...
  854. Starting Tell Plymouth To Write Out Runtime Data...
  855. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  856. [ OK ] Started Create Volatile Files and Directories.
  857. Starting Update UTMP about System Boot/Shutdown...
  858. Starting Network Time Synchronization...
  859. [ OK ] Started Update UTMP about System Boot/Shutdown.
  860. [ OK ] Started Network Time Synchronization.
  861. [ OK ] Reached target System Time Synchronized.
  862. [ OK ] Started LSB: Raise network interfaces..
  863. [ OK ] Reached target Network.
  864. [ OK ] Reached target Network is Online.
  865. [ 31.044404] [drm:vblank_disable_fn] disabling vblank on crtc 1
  866. [ 31.064623] [drm:msm_disable_vblank] dev=ede64c00, crtc=1
  867. [ 31.074896] [drm:vblank_disable_fn] disabling vblank on crtc 0
  868. [ 31.074947] [drm:mdp4_enable]
  869. [ 31.074981] [drm:mdp4_disable]
  870. [ 31.115136] [drm:msm_disable_vblank] dev=ede64c00, crtc=0
  871. [ 31.125564] [drm:mdp4_enable]
  872. [ 31.136001] [drm:mdp4_disable]
  873. [ OK ] Started LSB: Set console font and keymap.
  874. [ OK ] Reached target System Initialization.
  875. [ OK ] Started Daily Cleanup of Temporary Directories.
  876. [ OK ] Reached target Timers.
  877. [ OK ] Started Trigger resolvconf update for networkd DNS.
  878. [ OK ] Listening on ACPID Listen Socket.
  879. [ OK ] Started ACPI Events Check.
  880. [ OK ] Reached target Paths.
  881. [ OK ] Listening on D-Bus System Message Bus Socket.
  882. [ OK ] Reached target Sockets.
  883. [ OK ] Reached target Basic System.
  884. Starting System Logging Service...
  885. Starting Permit User Sessions...
  886. Starting LSB: Advanced IEEE 802.11 management daemon...
  887. Starting Network Manager...
  888. Starting /etc/rc.local Compatibility...
  889. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  890. Starting LSB: network benchmark...
  891. [ OK ] Started D-Bus System Message Bus.
  892. [ OK ] Started OpenBSD Secure Shell server.
  893. [ OK ] Started ACPI event daemon.
  894. [ OK ] Started Run anacron jobs.
  895. Starting Initialize hardware monitoring sensors...
  896. Starting Login Service...
  897. [ OK ] Started System Logging Service.
  898. [ OK ] Started Permit User Sessions.
  899. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  900. [ OK ] Started /etc/rc.local Compatibility.
  901. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  902. [ OK ] Started LSB: network benchmark.
  903. [ OK ] Started Initialize hardware monitoring sensors.
  904. Starting Authenticate and Authorize Users to Run Privileged Tasks...
  905. Starting LSB: set CPUFreq kernel parameters...
  906. Starting Wait for Plymouth Boot Screen to Quit...
  907. Starting Terminate Plymouth Boot Screen...
  908. [ OK ] Started Wait for Plymouth Boot Screen to Quit.
  909. [ OK ] Started LSB: set CPUFreq kernel parameters.
  910. [ OK ] Started Terminate Plymouth Boot Screen.
  911. [ OK ] Started Login Service.
  912. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
  913. [ OK ] Started Network Manager.
  914. [ OK ] Started Getty on tty1.
  915. [ OK ] Started Serial Getty on ttyMSM0.
  916. [ OK ] Reached target Login Prompts.
  917. [ OK ] Reached target Multi-User System.
  918. Starting Update UTMP about System Runlevel Changes...
  919. [ OK ] Started Update UTMP about System Runlevel Changes.
  920.  
  921. Debian GNU/Linux 8 linaro-alip ttyMSM0
  922.  
  923. [ 36.498781] [drm:drm_mode_object_reference] OBJ ID: 37 (1)
  924. [ 36.498796] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  925. [ 36.498808] [drm:drm_mode_object_unreference] OBJ ID: 37 (2)
  926. [ 36.498827] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  927. [ 36.498835] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  928. [ 36.498851] [drm:drm_mode_object_reference] OBJ ID: 32 (4)
  929. [ 36.498859] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  930. [ 36.498869] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  931. [ 36.498878] [drm:drm_mode_object_reference] OBJ ID: 32 (5)
  932. [ 36.498904] [drm:mdp4_crtc_atomic_check] DMA_P:0: check
  933. [ 36.498913] [drm:mdp4_crtc_atomic_check] DMA_E:1: check
  934. [ 36.498933] [drm:dsi_mgr_connector_best_encoder]
  935. [ 36.498944] [drm:dsi_mgr_connector_best_encoder]
  936. [ 36.498970] [drm:msm_atomic_commit] start: 00000003
  937. [ 36.498983] [drm:mdp4_enable]
  938. linaro-alip login: root (automatic login)
  939. [ 36.499007] [drm:msm_enable_vblank] dev=ede64c00, crtc=0
  940. [ 36.499035] [drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
  941. [ 36.499054] [drm:msm_enable_vblank] dev=ede64c00, crtc=1
  942. [ 36.499065] [drm:drm_vblank_enable] enabling vblank on crtc 1, ret: 0
  943. [ 36.499084] [drm:drm_calc_timestamping_constants] crtc 26: hwmode: htotal 574, vtotal 896, vdisplay 864
  944. [ 36.499093] [drm:drm_calc_timestamping_constants] crtc 26: clock 30857 kHz framedur 16667336 linedur 18601
  945. [ 36.499109] [drm:drm_atomic_helper_commit_planes] DMA_P:0: begin
  946. [ 36.499116] [drm:drm_atomic_helper_commit_planes] DMA_E:1: begin
  947. [ 36.499131] [drm:mdp4_plane_atomic_update] RGB1: FB[36] 0,0,480,864 -> CRTC[26] 0,0,480,864
  948. [ 36.499152] [drm:mdp4_crtc_atomic_flush] DMA_P:0: event: (null)
  949. [ 36.499179] [drm:crtc_flush] DMA_P:0: flush=00000011
  950. [ 36.499190] [drm:mdp4_crtc_atomic_flush] DMA_E:1: event: (null)
  951. [ 36.499211] [drm:crtc_flush] DMA_E:1: flush=00000002
  952. [ 36.500121] [drm:mdp4_enable]
  953.  
  954. [ 36.500154] [drm:mdp4_disable]
  955. [ 36.500182] [drm:mdp4_enable]
  956. [ 36.500206] [drm:mdp4_disable]
  957. [ 36.554807] msm 5100000.mdp: vblank time out, crtc=0
  958. [ 36.554834] [drm:mdp4_disable]
  959. [ 36.554858] [drm:drm_mode_object_unreference] OBJ ID: 32 (6)
  960. [ 36.554869] [drm:drm_mode_object_unreference] OBJ ID: 32 (5)
  961. [ 36.554878] [drm:drm_mode_object_unreference] OBJ ID: 37 (1)
  962. [ 36.554897] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  963. [ 36.554917] [drm:complete_commit] end: 00000003
  964. [ 36.554929] [drm:drm_mode_object_reference] OBJ ID: 36 (3)
  965. [ 36.554937] [drm:drm_mode_object_unreference] OBJ ID: 36 (4)
  966. Last login: Wed Apr 12 07:53:17 UTC 2017 on ttyMSM0
  967. Linux linaro-alip 4.9.0-01579-g892f1cf #106 SMP PREEMPT Tue Apr 18 20:02:31 IST 2017 armv7l
  968.  
  969. The programs included with the Debian GNU/Linux system are free software;
  970. the exact distribution terms for each program are described in the
  971. individual files in /usr/share/doc/*/copyright.
  972.  
  973. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  974. permitted by applicable law.
  975. [ 37.442557] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
  976. root@linaro-alip:~#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!